blob: df3387eac8086fe5dffc4cd73fad4ea32c76f71b [file] [log] [blame]
/******************************************************************************
*
* This file is provided under a dual license. When you use or
* distribute this software, you may choose to be licensed under
* version 2 of the GNU General Public License ("GPLv2 License")
* or BSD License.
*
* GPLv2 License
*
* Copyright(C) 2016 MediaTek Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
* See http://www.gnu.org/licenses/gpl-2.0.html for more details.
*
* BSD LICENSE
*
* Copyright(C) 2016 MediaTek Inc. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*****************************************************************************/
/*
** Id: //Department/DaVinci/BRANCHES/MT6620_WIFI_DRIVER_V2_3/include/config.h#3
*/
/*! \file "config.h"
* \brief This file includes the various configurable parameters for customers
*
* This file ncludes the configurable parameters except the parameters indicate the turning-on/off of some features
*/
#ifndef _CONFIG_H
#define _CONFIG_H
/*******************************************************************************
* C O M P I L E R F L A G S
********************************************************************************
*/
/*******************************************************************************
* E X T E R N A L R E F E R E N C E S
********************************************************************************
*/
/*******************************************************************************
* C O N S T A N T S
********************************************************************************
*/
/* 2 Flags for OS capability */
#if defined(_HIF_SDIO)
#ifdef LINUX
#ifdef CONFIG_X86
#define MTK_WCN_HIF_SDIO 0
#else
#define MTK_WCN_HIF_SDIO 1
#endif
#else
#define MTK_WCN_HIF_SDIO 0
#endif
#else
#define MTK_WCN_HIF_SDIO 0
#endif
/* Android build-in driver switch, Mike 2016/11/11*/
#ifndef CFG_BUILT_IN_DRIVER
#define CFG_BUILT_IN_DRIVER 0
#endif
/* Mike 2016/09/01 ALPS update K3.18 80211_disconnect to K4.4 version*/
/* work around for any alps K3.18 platform*/
#ifndef CFG_WPS_DISCONNECT
#define CFG_WPS_DISCONNECT 0
#endif
#if (CFG_SUPPORT_AEE == 1)
#define CFG_ENABLE_AEE_MSG 1
#else
#define CFG_ENABLE_AEE_MSG 0
#endif
#define CFG_SUPPORT_MTK_ANDROID_KK 1
#define CFG_ENABLE_EARLY_SUSPEND 0
#define CFG_ENABLE_NET_DEV_NOTIFY 1
/* 2 Flags for Driver Features */
#define CFG_TX_FRAGMENT 1 /*!< 1: Enable TX fragmentation */
/* 0: Disable */
#define CFG_SUPPORT_PERFORMANCE_TEST 0 /*Only for performance Test */
#define CFG_COUNTRY_CODE NULL /* "US" */
#define CFG_SUPPORT_DEBUG_FS 0
#ifndef LINUX
#define CFG_FW_FILENAME L"WIFI_RAM_CODE"
#define CFG_CR4_FW_FILENAME L"WIFI_RAM_CODE2"
#else
#define CFG_FW_FILENAME "WIFI_RAM_CODE"
#define CFG_CR4_FW_FILENAME "WIFI_RAM_CODE2"
#endif
#ifndef CFG_MET_PACKET_TRACE_SUPPORT
#define CFG_MET_PACKET_TRACE_SUPPORT 0 /*move to wlan/MAKEFILE */
#endif
#ifndef CFG_MET_TAG_SUPPORT
#define CFG_MET_TAG_SUPPORT 0
#endif
/*------------------------------------------------------------------------------
* Driver config
*------------------------------------------------------------------------------
*/
#ifndef LINUX
#define CFG_SUPPORT_CFG_FILE 0
#else
#define CFG_SUPPORT_CFG_FILE 1
#endif
#define CFG_SUPPORT_802_11D 1 /*!< 1(default): Enable 802.11d */
/* 0: Disable */
#define CFG_SUPPORT_RRM 0 /* Radio Reasource Measurement (802.11k) */
#ifndef CFG_SUPPORT_DFS
#define CFG_SUPPORT_DFS 1 /* DFS (802.11h) */
#endif
#ifndef CFG_SUPPORT_DFS_MASTER
#define CFG_SUPPORT_DFS_MASTER 1
#endif
#if (CFG_SUPPORT_DFS == 1) /* Add by Enlai */
#define CFG_SUPPORT_QUIET 0 /* Quiet (802.11h) */
#define CFG_SUPPORT_SPEC_MGMT 1 /* Spectrum Management (802.11h): TPC and DFS */
#else
#define CFG_SUPPORT_QUIET 0 /* Quiet (802.11h) */
#define CFG_SUPPORT_SPEC_MGMT 0 /* Spectrum Management (802.11h): TPC and DFS */
#endif
#define CFG_SUPPORT_RX_RDG 0 /* 11n feature. RX RDG capability */
#define CFG_SUPPORT_MFB 0 /* 802.11n MCS Feedback responder */
#define CFG_SUPPORT_RX_STBC 1 /* 802.11n RX STBC (1SS) */
#define CFG_SUPPORT_RX_SGI 1 /* 802.11n RX short GI for both 20M and 40M BW */
#define CFG_SUPPORT_RX_HT_GF 1 /* 802.11n RX HT green-field capability */
#define CFG_SUPPORT_BFER 0
#define CFG_SUPPORT_BFEE 1
#define CFG_SUPPORT_WAPI 1
/* Enable QA Tool Support */
#define CFG_SUPPORT_QA_TOOL 1
/* Enable TX BF Support */
#define CFG_SUPPORT_TX_BF 1
/* Enable MU MIMO Support */
#define CFG_SUPPORT_MU_MIMO 1
/* Enable WOW Support */
#define CFG_WOW_SUPPORT 1
/* Enable A-MSDU RX Reordering Support */
#define CFG_SUPPORT_RX_AMSDU 1
/* Enable Android wake_lock operations */
#ifdef CONFIG_HAS_WAKELOCK
#ifndef CFG_ENABLE_WAKE_LOCK
#define CFG_ENABLE_WAKE_LOCK 1
#endif
#else
#undef CFG_ENABLE_WAKE_LOCK
#define CFG_ENABLE_WAKE_LOCK 0
#endif
/*------------------------------------------------------------------------------
* Flags of Buffer mode SUPPORT
*------------------------------------------------------------------------------
*/
#define CFG_SUPPORT_BUFFER_MODE 1
/*------------------------------------------------------------------------------
* SLT Option
*------------------------------------------------------------------------------
*/
#define CFG_SLT_SUPPORT 0
#ifdef NDIS60_MINIPORT
#define CFG_NATIVE_802_11 1
#define CFG_TX_MAX_PKT_SIZE 2304
#define CFG_TCP_IP_CHKSUM_OFFLOAD_NDIS_60 0 /* !< 1: Enable TCP/IP header checksum offload */
/* 0: Disable */
#define CFG_TCP_IP_CHKSUM_OFFLOAD 0
#define CFG_WHQL_DOT11_STATISTICS 1
#define CFG_WHQL_ADD_REMOVE_KEY 1
#define CFG_WHQL_CUSTOM_IE 1
#define CFG_WHQL_SAFE_MODE_ENABLED 1
#else
#define CFG_TCP_IP_CHKSUM_OFFLOAD 1
#define CFG_TCP_IP_CHKSUM_OFFLOAD_NDIS_60 0
#define CFG_TX_MAX_PKT_SIZE 1600
#define CFG_NATIVE_802_11 0
#endif
/* 2 Flags for Driver Parameters */
/*------------------------------------------------------------------------------
* Flags for EHPI Interface in Colibri Platform
*------------------------------------------------------------------------------
*/
/*!< 1: Do workaround for faster bus timing */
/* 0(default): Disable */
#define CFG_EHPI_FASTER_BUS_TIMING 0
/*------------------------------------------------------------------------------
* Flags for UMAC
*------------------------------------------------------------------------------
*/
#define CFG_UMAC_GENERATION 0x20
/*------------------------------------------------------------------------------
* Flags for HIFSYS Interface
*------------------------------------------------------------------------------
*/
#ifdef _lint
/* #define _HIF_SDIO 1 */
#endif
/* 1(default): Enable SDIO ISR & TX/RX status enhance mode
* 0: Disable
*/
#define CFG_SDIO_INTR_ENHANCE 1
/* 1(default): Enable SDIO ISR & TX/RX status enhance mode
* 0: Disable
*/
#define CFG_SDIO_RX_ENHANCE 1
/* 1: Enable SDIO TX enhance mode(Multiple frames in single BLOCK CMD)
* 0(default): Disable
*/
#define CFG_SDIO_TX_AGG 1
/* 1: Enable SDIO RX enhance mode(Multiple frames in single BLOCK CMD)
* 0(default): Disable
*/
#define CFG_SDIO_RX_AGG 1
/* 1: Enable SDIO RX Tasklet De-Aggregation
* 0(default): Disable
*/
#define CFG_SDIO_RX_AGG_TASKLET 0
#if (CFG_SDIO_RX_AGG == 1) && (CFG_SDIO_INTR_ENHANCE == 0)
#error "CFG_SDIO_INTR_ENHANCE should be 1 once CFG_SDIO_RX_AGG equals to 1"
#elif (CFG_SDIO_INTR_ENHANCE == 1 || CFG_SDIO_RX_ENHANCE == 1) && (CFG_SDIO_RX_AGG == 0)
#error "CFG_SDIO_RX_AGG should be 1 once CFG_SDIO_INTR_ENHANCE and/or CFG_SDIO_RX_ENHANCE equals to 1"
#endif
#ifdef WINDOWS_CE
#define CFG_SDIO_PATHRU_MODE 1 /*!< 1: Support pass through (PATHRU) mode */
/* 0: Disable */
#else
#define CFG_SDIO_PATHRU_MODE 0 /*!< 0: Always disable if WINDOWS_CE is not defined */
#endif
#define CFG_SDIO_ACCESS_N9_REGISTER_BY_MAILBOX 0
#define CFG_MAX_RX_ENHANCE_LOOP_COUNT 3
#define CFG_USB_TX_AGG 1
#define CFG_USB_CONSISTENT_DMA 0
#define CFG_USB_TX_HANDLE_IN_HIF_THREAD 0
#define CFG_USB_RX_HANDLE_IN_HIF_THREAD 0
#ifndef CFG_TX_DIRECT_USB
#define CFG_TX_DIRECT_USB 1
#endif
#ifndef CFG_RX_DIRECT_USB
#define CFG_RX_DIRECT_USB 1
#endif
#define CFG_HW_WMM_BY_BSS 1
/*------------------------------------------------------------------------------
* Flags and Parameters for Integration
*------------------------------------------------------------------------------
*/
#define CFG_MULTI_ECOVER_SUPPORT 1
#define CFG_ENABLE_CAL_LOG 1
#define CFG_REPORT_RFBB_VERSION 1
#define HW_BSSID_NUM 4 /* HW BSSID number by chip */
#define HW_WMM_NUM 4 /* HW WMM number by chip */
#ifndef CFG_CHIP_RESET_SUPPORT
#define CFG_CHIP_RESET_SUPPORT 0
#endif
/*------------------------------------------------------------------------------
* Flags for workaround
*------------------------------------------------------------------------------
*/
/*------------------------------------------------------------------------------
* Flags for driver version
*------------------------------------------------------------------------------
*/
#define CFG_DRV_OWN_VERSION ((UINT_16)((NIC_DRIVER_MAJOR_VERSION << 8) | \
(NIC_DRIVER_MINOR_VERSION)))
#define CFG_DRV_PEER_VERSION ((UINT_16)0x0000)
/*------------------------------------------------------------------------------
* Flags and Parameters for TX path
*------------------------------------------------------------------------------
*/
/*! Maximum number of SW TX packet queue */
#define CFG_TX_MAX_PKT_NUM 1024
/*! Maximum number of SW TX CMD packet buffer */
#define CFG_TX_MAX_CMD_PKT_NUM 32
/*------------------------------------------------------------------------------
* Flags and Parameters for RX path
*------------------------------------------------------------------------------
*/
/*------------------------------------------------------------------------------
* CONFIG_TITLE : Move BA from FW to Driver
* OWNER : Puff Wen
* Description : Move BA from FW to Driver
*------------------------------------------------------------------------------
*/
#define CFG_M0VE_BA_TO_DRIVER 0
/*! Max. descriptor number - sync. with firmware */
#if CFG_SLT_SUPPORT
#define CFG_NUM_OF_RX0_HIF_DESC 42
#else
#define CFG_NUM_OF_RX0_HIF_DESC 16
#endif
#define CFG_NUM_OF_RX1_HIF_DESC 2
/*! Max. buffer hold by QM */
#define CFG_NUM_OF_QM_RX_PKT_NUM HIF_NUM_OF_QM_RX_PKT_NUM
/*! Maximum number of SW RX packet buffer */
#define CFG_RX_MAX_PKT_NUM ((CFG_NUM_OF_RX0_HIF_DESC + CFG_NUM_OF_RX1_HIF_DESC) * 3 \
+ CFG_NUM_OF_QM_RX_PKT_NUM)
#define CFG_RX_REORDER_Q_THRESHOLD 8
#ifndef LINUX
#define CFG_RX_RETAINED_PKT_THRESHOLD (CFG_NUM_OF_RX0_HIF_DESC + CFG_NUM_OF_RX1_HIF_DESC \
+ CFG_NUM_OF_QM_RX_PKT_NUM)
#else
#define CFG_RX_RETAINED_PKT_THRESHOLD 0
#endif
/*! Maximum RX packet size, if exceed this value, drop incoming packet */
/* 7.2.3 Maganement frames */
/* TODO: it should be 4096 under emulation mode */
#define CFG_RX_MAX_PKT_SIZE (28 + 2312 + 12 /*HIF_RX_HEADER_T*/)
/*! Minimum RX packet size, if lower than this value, drop incoming packet */
#define CFG_RX_MIN_PKT_SIZE 10 /*!< 802.11 Control Frame is 10 bytes */
/*! RX BA capability */
#define CFG_NUM_OF_RX_BA_AGREEMENTS 8
#if CFG_M0VE_BA_TO_DRIVER
#define CFG_RX_BA_MAX_WINSIZE 64
#endif
#define CFG_RX_BA_INC_SIZE 64
#define CFG_RX_MAX_BA_TID_NUM 8
#define CFG_RX_REORDERING_ENABLED 1
#define CFG_PF_ARP_NS_MAX_NUM 3
#define CFG_COMPRESSION_DEBUG 0
#define CFG_DECOMPRESSION_TMP_ADDRESS 0
#define CFG_SUPPORT_COMPRESSION_FW_OPTION 0
/*------------------------------------------------------------------------------
* Flags and Parameters for CMD/RESPONSE
*------------------------------------------------------------------------------
*/
#define CFG_RESPONSE_POLLING_TIMEOUT 1000
#define CFG_RESPONSE_POLLING_DELAY 5
/*------------------------------------------------------------------------------
* Flags and Parameters for Protocol Stack
*------------------------------------------------------------------------------
*/
/*! Maximum number of BSS in the SCAN list */
#define CFG_MAX_NUM_BSS_LIST 192
#define CFG_MAX_COMMON_IE_BUF_LEN ((1500 * CFG_MAX_NUM_BSS_LIST) / 3)
/*! Maximum size of Header buffer of each SCAN record */
#define CFG_RAW_BUFFER_SIZE 1024
/*! Maximum size of IE buffer of each SCAN record */
#define CFG_IE_BUFFER_SIZE 512
/*------------------------------------------------------------------------------
* Flags and Parameters for Power management
*------------------------------------------------------------------------------
*/
#define CFG_ENABLE_FULL_PM 1
#define CFG_ENABLE_WAKEUP_ON_LAN 0
#define CFG_INIT_POWER_SAVE_PROF ENUM_PSP_FAST_SWITCH
#define CFG_INIT_ENABLE_PATTERN_FILTER_ARP 0
#define CFG_INIT_UAPSD_AC_BMP 0 /* (BIT(3) | BIT(2) | BIT(1) | BIT(0)) */
/* #define CFG_SUPPORT_WAPI 0 */
#define CFG_SUPPORT_WPS 1
#define CFG_SUPPORT_WPS2 1
/*------------------------------------------------------------------------------
* 802.11i RSN Pre-authentication PMKID cahce maximun number
*------------------------------------------------------------------------------
*/
/*!< max number of PMKID cache 16(default) : The Max PMKID cache */
#define CFG_MAX_PMKID_CACHE 16
/*------------------------------------------------------------------------------
* Auto Channel Selection maximun channel number
*------------------------------------------------------------------------------
*/
#define MAX_CHN_NUM 39 /* ARRAY_SIZE(mtk_5ghz_channels) + ARRAY_SIZE(mtk_2ghz_channels) */
#define MAX_2G_BAND_CHN_NUM 14
#define MAX_5G_BAND_CHN_NUM (MAX_CHN_NUM - MAX_2G_BAND_CHN_NUM)
/*------------------------------------------------------------------------------
* Flags and Parameters for Ad-Hoc
*------------------------------------------------------------------------------
*/
#define CFG_INIT_ADHOC_FREQ (2462000)
#define CFG_INIT_ADHOC_MODE AD_HOC_MODE_MIXED_11BG
#define CFG_INIT_ADHOC_BEACON_INTERVAL (100)
#define CFG_INIT_ADHOC_ATIM_WINDOW (0)
/*------------------------------------------------------------------------------
* Flags and Parameters for Maximum Scan SSID number
*------------------------------------------------------------------------------
*/
#define CFG_SCAN_SSID_MAX_NUM (4)
#define CFG_SCAN_SSID_MATCH_MAX_NUM (16)
/*------------------------------------------------------------------------------
* Flags and Parameters for Load Setup Default
*------------------------------------------------------------------------------
*/
/*------------------------------------------------------------------------------
* Flags for enable 802.11A Band setting
*------------------------------------------------------------------------------
*/
/*------------------------------------------------------------------------------
* Flags and Parameters for Interrupt Process
*------------------------------------------------------------------------------
*/
#define CFG_IST_LOOP_COUNT HIF_IST_LOOP_COUNT
#define CFG_INT_WRITE_CLEAR 0
/* 2 Flags for Driver Debug Options */
/*------------------------------------------------------------------------------
* Flags of TX Debug Option. NOTE(Kevin): Confirm with SA before modifying following flags.
*------------------------------------------------------------------------------
*/
/*!< 1: Debug statistics usage of MGMT Buffer */
/* 0: Disable */
#define CFG_DBG_MGT_BUF 1
#define CFG_HIF_STATISTICS 0
#define CFG_HIF_RX_STARVATION_WARNING 0
#define CFG_RX_PKTS_DUMP 0
#define CFG_ASSERT_DUMP 1
/*------------------------------------------------------------------------------
* Flags of Firmware Download Option.
*------------------------------------------------------------------------------
*/
#define CFG_ENABLE_FW_DOWNLOAD 1
#define CFG_ENABLE_FW_DOWNLOAD_ACK 1
/*------------------------------------------------------------------------------
* Flags of Bluetooth-over-WiFi (BT 3.0 + HS) support
*------------------------------------------------------------------------------
*/
#define CFG_ENABLE_BT_OVER_WIFI 0
#define CFG_BOW_SEPARATE_DATA_PATH 1
#define CFG_BOW_PHYSICAL_LINK_NUM 4
#define CFG_BOW_LIMIT_AIS_CHNL 1
#define CFG_BOW_SUPPORT_11N 1
#define CFG_BOW_RATE_LIMITATION 1
/*------------------------------------------------------------------------------
* Flags of Wi-Fi Direct support
*------------------------------------------------------------------------------
*/
/*------------------------------------------------------------------------------
* Support reporting all BSS networks to cfg80211 kernel when scan
* request is from P2P interface
* Originally only P2P networks will be reported when scan request is from p2p0
*------------------------------------------------------------------------------
*/
#ifndef CFG_P2P_SCAN_REPORT_ALL_BSS
#define CFG_P2P_SCAN_REPORT_ALL_BSS 0
#endif
/*------------------------------------------------------------------------------
* Flags for GTK rekey offload
*------------------------------------------------------------------------------
*/
#ifdef LINUX
#ifdef CONFIG_X86
#define CFG_ENABLE_WIFI_DIRECT 1
#define CFG_SUPPORT_802_11W 1
#define CONFIG_SUPPORT_GTK_REKEY 1
#else
#define CFG_ENABLE_WIFI_DIRECT 1
#define CFG_SUPPORT_802_11W 1 /*!< 0(default): Disable 802.11W */
#define CONFIG_SUPPORT_GTK_REKEY 1
#endif
#else /* !LINUX */
#define CFG_ENABLE_WIFI_DIRECT 0
#define CFG_SUPPORT_802_11W 0 /* Not support at WinXP */
#endif /* LINUX */
#define CFG_SUPPORT_PERSISTENT_GROUP 0
#define CFG_TEST_WIFI_DIRECT_GO 0
#define CFG_TEST_ANDROID_DIRECT_GO 0
#define CFG_UNITEST_P2P 0
/*
* Enable cfg80211 option after Android 2.2(Froyo) is suggested,
* cfg80211 on linux 2.6.29 is not mature yet
*/
#define CFG_ENABLE_WIFI_DIRECT_CFG_80211 1
#define CFG_SUPPORT_HOTSPOT_OPTIMIZATION 0
#define CFG_HOTSPOT_OPTIMIZATION_BEACON_INTERVAL 300
#define CFG_HOTSPOT_OPTIMIZATION_DTIM 1
#define CFG_AUTO_CHANNEL_SEL_SUPPORT 1
/*------------------------------------------------------------------------------
* Configuration Flags (Linux Only)
*------------------------------------------------------------------------------
*/
#define CFG_SUPPORT_EXT_CONFIG 0
/*------------------------------------------------------------------------------
* Statistics Buffering Mechanism
*------------------------------------------------------------------------------
*/
#if CFG_SUPPORT_PERFORMANCE_TEST
#define CFG_ENABLE_STATISTICS_BUFFERING 1
#else
#define CFG_ENABLE_STATISTICS_BUFFERING 0
#endif
#define CFG_STATISTICS_VALID_CYCLE 2000
#define CFG_LINK_QUALITY_VALID_PERIOD 500
/*------------------------------------------------------------------------------
* Migration Option
*------------------------------------------------------------------------------
*/
#define CFG_SUPPORT_ADHOC 1
#define CFG_SUPPORT_AAA 1
#define CFG_SUPPORT_BCM 0
#define CFG_SUPPORT_BCM_BWCS 0
#define CFG_SUPPORT_BCM_BWCS_DEBUG 0
#define CFG_SUPPORT_RDD_TEST_MODE 0
#define CFG_SUPPORT_PWR_MGT 1
#define CFG_ENABLE_HOTSPOT_PRIVACY_CHECK 1
#define CFG_MGMT_FRAME_HANDLING 1
#define CFG_MGMT_HW_ACCESS_REPLACEMENT 0
#if CFG_SUPPORT_PERFORMANCE_TEST
#else
#endif
#define CFG_SUPPORT_AIS_5GHZ 1
#define CFG_SUPPORT_BEACON_CHANGE_DETECTION 0
/*------------------------------------------------------------------------------
* Option for NVRAM and Version Checking
*------------------------------------------------------------------------------
*/
#define CFG_SUPPORT_NVRAM 1
#define CFG_NVRAM_EXISTENCE_CHECK 1
#define CFG_SW_NVRAM_VERSION_CHECK 1
#define CFG_SUPPORT_NIC_CAPABILITY 1
/*------------------------------------------------------------------------------
* CONFIG_TITLE : Stress Test Option
* OWNER : Puff Wen
* Description : For stress test only. DO NOT enable it while normal operation
*------------------------------------------------------------------------------
*/
#define CFG_STRESS_TEST_SUPPORT 0
/*------------------------------------------------------------------------------
* Flags for LINT
*------------------------------------------------------------------------------
*/
#define LINT_SAVE_AND_DISABLE /*lint -save -e* */
#define LINT_RESTORE /*lint -restore */
#define LINT_EXT_HEADER_BEGIN LINT_SAVE_AND_DISABLE
#define LINT_EXT_HEADER_END LINT_RESTORE
/*------------------------------------------------------------------------------
* Flags of Features
*------------------------------------------------------------------------------
*/
#define CFG_SUPPORT_PNO 1
#define CFG_SUPPORT_TDLS 1
#define CFG_SUPPORT_QOS 1 /* Enable/disable QoS TX, AMPDU */
#define CFG_SUPPORT_AMPDU_TX 1
#define CFG_SUPPORT_AMPDU_RX 1
#define CFG_SUPPORT_TSPEC 0 /* Enable/disable TS-related Action frames handling */
#define CFG_SUPPORT_UAPSD 1
#define CFG_SUPPORT_UL_PSMP 0
#ifndef CFG_SUPPORT_ROAMING
#define CFG_SUPPORT_ROAMING 1 /* Roaming System */
#endif
#if (CFG_SUPPORT_ROAMING == 1)
/* Roaming feature: skip roaming when only one ESSID AP
* Need Android background scan
* if no roaming event occurred
* to trigger roaming scan
* after skip roaming in one ESSID AP case
*/
#define CFG_SUPPORT_ROAMING_SKIP_ONE_AP 1
#if CFG_SUPPORT_ROAMING_SKIP_ONE_AP
#define CFG_MAX_NUM_ROAM_BSS_LIST 64
#endif
#else
#define CFG_SUPPORT_ROAMING_SKIP_ONE_AP 0
#endif /* CFG_SUPPORT_ROAMING */
#define CFG_SUPPORT_SWCR 1
#define CFG_SUPPORT_ANTI_PIRACY 1
#define CFG_SUPPORT_OSC_SETTING 1
#define CFG_SUPPORT_P2P_RSSI_QUERY 0
#define CFG_SHOW_MACADDR_SOURCE 1
#define CFG_SUPPORT_802_11V 0 /* Support 802.11v Wireless Network Management */
#define CFG_SUPPORT_802_11V_TIMING_MEASUREMENT 0
#if (CFG_SUPPORT_802_11V_TIMING_MEASUREMENT == 1) && (CFG_SUPPORT_802_11V == 0)
#error "CFG_SUPPORT_802_11V should be 1 once CFG_SUPPORT_802_11V_TIMING_MEASUREMENT equals to 1"
#endif
#if (CFG_SUPPORT_802_11V == 0)
#define WNM_UNIT_TEST 0
#endif
#define CFG_DRIVER_COMPOSE_ASSOC_REQ 1
#define CFG_SUPPORT_802_11AC 1
#define CFG_STRICT_CHECK_CAPINFO_PRIVACY 0
#define CFG_SUPPORT_WFD 1
#define CFG_SUPPORT_WFD_COMPOSE_IE 1
#define CFG_SUPPORT_HOTSPOT_WPS_MANAGER 1
#define CFG_SUPPORT_NFC_BEAM_PLUS 1
/* Refer to CONFIG_MTK_STAGE_SCAN */
#define CFG_MTK_STAGE_SCAN 1
#define CFG_SUPPORT_MULTITHREAD 1 /* Enable driver support multicore */
#define CFG_SUPPORT_MTK_SYNERGY 1
#define CFG_SUPPORT_PWR_LIMIT_COUNTRY 1
#define CFG_FIX_2_TX_PORT 0
/*------------------------------------------------------------------------------
* Flags of bus error tolerance
*------------------------------------------------------------------------------
*/
#define CFG_FORCE_RESET_UNDER_BUS_ERROR 0
/*------------------------------------------------------------------------------
* Build Date Code Integration
*------------------------------------------------------------------------------
*/
#define CFG_SUPPORT_BUILD_DATE_CODE 0
/*------------------------------------------------------------------------------
* Flags of SDIO test pattern support
*------------------------------------------------------------------------------
*/
#define CFG_SUPPORT_SDIO_READ_WRITE_PATTERN 1
/*------------------------------------------------------------------------------
* Flags of AIS passive scan support
*------------------------------------------------------------------------------
*/
#define CFG_SUPPORT_AIS_PASSIVE_SCAN 0
/*------------------------------------------------------------------------------
* Flags of Workaround
*------------------------------------------------------------------------------
*/
#define CFG_ENABLE_READ_EXTRA_4_BYTES 1
/* Temp workaround for 11ac certification */
#define CFG_WORKAROUND_OPMODE_CONFLICT_OPINFO 1
/*------------------------------------------------------------------------------
* Flags of 5G NVRAM SUPPORT
*------------------------------------------------------------------------------
*/
#define CFG_SUPPORT_NVRAM_5G 1
/*------------------------------------------------------------------------------
* Flags of Packet Lifetime Profiling Mechanism
*------------------------------------------------------------------------------
*/
#define CFG_ENABLE_PKT_LIFETIME_PROFILE 1
#define CFG_PRINT_PKT_LIFETIME_PROFILE 0
#define CFG_ENABLE_PER_STA_STATISTICS 1
/*------------------------------------------------------------------------------
* Flags for prepare the FW compile flag
*------------------------------------------------------------------------------
*/
#define COMPILE_FLAG0_GET_STA_LINK_STATUS (1<<0)
#define COMPILE_FLAG0_WFD_ENHANCEMENT_PROTECT (1<<1)
/*------------------------------------------------------------------------------
* Flags for prepare the FW feature flag
*------------------------------------------------------------------------------
*/
#define FEATURE_FLAG0_NIC_CAPABILITY_V2 (1<<0)
/*------------------------------------------------------------------------------
* Flags of Batch Scan SUPPORT
*------------------------------------------------------------------------------
*/
#define CFG_SUPPORT_BATCH_SCAN 1
#define CFG_BATCH_MAX_MSCAN 2
/*------------------------------------------------------------------------------
* Flags of Sniffer SUPPORT
*------------------------------------------------------------------------------
*/
#define CFG_SUPPORT_SNIFFER 1
#define WLAN_INCLUDE_PROC 1
/*------------------------------------------------------------------------------
* Flags of Sniffer SUPPORT
*------------------------------------------------------------------------------
*/
#define CFG_DUAL_P2PLIKE_INTERFACE 1
#define RUNNING_P2P_MODE 0
#define RUNNING_AP_MODE 1
#define RUNNING_DUAL_AP_MODE 2
#define RUNNING_P2P_AP_MODE 3
#define RUNNING_P2P_MODE_NUM 4
/*------------------------------------------------------------------------------
* Flags of MSP SUPPORT
*------------------------------------------------------------------------------
*/
#define CFG_SUPPORT_MSP 1
/*------------------------------------------------------------------------------
* Flags of Drop Packet Replay SUPPORT
*------------------------------------------------------------------------------
*/
#define CFG_SUPPORT_REPLAY_DETECTION 1
/*------------------------------------------------------------------------------
* Flags of Last Second MCS Tx/Rx Info
*------------------------------------------------------------------------------
*/
#define CFG_SUPPORT_LAST_SEC_MCS_INFO 1
#if CFG_SUPPORT_LAST_SEC_MCS_INFO
#define MCS_INFO_SAMPLE_CNT 10
#endif
/*------------------------------------------------------------------------------
* Flags of driver fw customization
*------------------------------------------------------------------------------
*/
#define CFG_SUPPORT_EASY_DEBUG 1
#define CFG_SUPPORT_FW_DBG_LEVEL_CTRL 1
/*------------------------------------------------------------------------------
* Flags of driver delay calibration atfer efuse buffer mode CMD
*------------------------------------------------------------------------------
*/
#define CFG_EFUSE_BUFFER_MODE_DELAY_CAL 1
/*------------------------------------------------------------------------------
* Flags for E1 IC workaround (SPI clock divided by 2)
*------------------------------------------------------------------------------
*/
#define CFG_SUPPORT_PMIC_SPI_CLOCK_SWITCH 1
/*------------------------------------------------------------------------------
* Flags of driver EEPROM pages for QA tool
*------------------------------------------------------------------------------
*/
#define CFG_EEPROM_PAGE_ACCESS 1
/*------------------------------------------------------------------------------
* Flags for HOST_OFFLOAD
*------------------------------------------------------------------------------
*/
#define CFG_SUPPORT_WIFI_HOST_OFFLOAD 1
/*------------------------------------------------------------------------------
* Flags for DBDC Feature
*------------------------------------------------------------------------------
*/
#define CFG_SUPPORT_DBDC 1
/*------------------------------------------------------------------------------
* Flags for Using TC4 Resource in ROM code stage
*------------------------------------------------------------------------------
*/
#define CFG_USE_TC4_RESOURCE_FOR_INIT_CMD 0
/*------------------------------------------------------------------------------
* Flags for Efuse Start and End address report from FW
*------------------------------------------------------------------------------
*/
#define CFG_FW_Report_Efuse_Address 1
/*------------------------------------------------------------------------------
* FW name max length
*------------------------------------------------------------------------------
*/
#define CFG_FW_NAME_MAX_LEN (64)
/*------------------------------------------------------------------------------
* Chip low power debug function
*------------------------------------------------------------------------------
*/
#define CFG_SUPPORT_LOW_POWER_DEBUG 1
/*------------------------------------------------------------------------------
* Support WMT WIFI Path Config
*------------------------------------------------------------------------------
*/
#define CFG_WMT_WIFI_PATH_SUPPORT 0
/*------------------------------------------------------------------------------
* Support CFG_SISO_SW_DEVELOP
*------------------------------------------------------------------------------
*/
#define CFG_SISO_SW_DEVELOP 1
/*------------------------------------------------------------------------------
* Support antenna selection
*------------------------------------------------------------------------------
*/
#define CFG_SUPPORT_ANT_SELECT 1
/*------------------------------------------------------------------------------
* Flags for a Goal for MT6632 : Cal Result Backup in Host or NVRam when Android Boot
*------------------------------------------------------------------------------
*/
#if 0 /*(MTK_WCN_HIF_SDIO) : 20161003 Default Off, later will enable by MTK_WCN_HIF_SDIO */
#define CFG_SUPPORT_CAL_RESULT_BACKUP_TO_HOST 1
#define CFG_SUPPORT_CAL_RESULT_BACKUP_TO_HOST_DBGLOG 0
#else
#define CFG_SUPPORT_CAL_RESULT_BACKUP_TO_HOST 0
#define CFG_SUPPORT_CAL_RESULT_BACKUP_TO_HOST_DBGLOG 0
#endif
/*------------------------------------------------------------------------------
* Enable SDIO 1-bit Data Mode. (Usually debug only)
*------------------------------------------------------------------------------
*/
#define CFG_SDIO_1BIT_DATA_MODE 0
/*------------------------------------------------------------------------------
* Single Sku
*------------------------------------------------------------------------------
*/
#define CFG_SUPPORT_SINGLE_SKU 1
#ifndef CFG_SUPPORT_SINGLE_SKU_LOCAL_DB
#define CFG_SUPPORT_SINGLE_SKU_LOCAL_DB 1
#endif
/*------------------------------------------------------------------------------
* Auto enable SDIO asynchronous interrupt mode
*------------------------------------------------------------------------------
*/
#define CFG_SDIO_ASYNC_IRQ_AUTO_ENABLE 1
/*------------------------------------------------------------------------------
* Direct Control for RF/PHY/BB/MAC for Manual Configuration via command/api
*------------------------------------------------------------------------------
*/
#define CFG_SUPPORT_ADVANCE_CONTROL 1
/*------------------------------------------------------------------------------
* Driver pre-allocate total size of memory in one time
*------------------------------------------------------------------------------
*/
#ifndef CFG_PRE_ALLOCATION_IO_BUFFER
#define CFG_PRE_ALLOCATION_IO_BUFFER 0
#endif
/*------------------------------------------------------------------------------
* Support scan with channels specified
*------------------------------------------------------------------------------
*/
#ifndef CFG_SCAN_CHANNEL_SPECIFIED
#define CFG_SCAN_CHANNEL_SPECIFIED 1
#endif
/*******************************************************************************
* D A T A T Y P E S
********************************************************************************
*/
/*******************************************************************************
* P U B L I C D A T A
********************************************************************************
*/
/*******************************************************************************
* P R I V A T E D A T A
********************************************************************************
*/
/*******************************************************************************
* M A C R O S
********************************************************************************
*/
/*******************************************************************************
* F U N C T I O N D E C L A R A T I O N S
********************************************************************************
*/
/*******************************************************************************
* F U N C T I O N S
********************************************************************************
*/
#endif /* _CONFIG_H */