Google Git
Sign in
coral / mt7668-wifi-mod / 95a32c71b3f014766edacfa618372b1a8ff64211 / . / common / wlan_oid.c
blob: 6fb45f419a23a70adc2773c85ae979d5126f7402 [file] [log] [blame]
/******************************************************************************
*
* This file is provided under a dual license. When you use or
* distribute this software, you may choose to be licensed under
* version 2 of the GNU General Public License ("GPLv2 License")
* or BSD License.
*
* GPLv2 License
*
* Copyright(C) 2016 MediaTek Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
* See http://www.gnu.org/licenses/gpl-2.0.html for more details.
*
* BSD LICENSE
*
* Copyright(C) 2016 MediaTek Inc. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*****************************************************************************/
/*
** Id: //Department/DaVinci/BRANCHES/MT6620_WIFI_DRIVER_V2_3/common/wlan_oid.c#11
*/
/*! \file wlanoid.c
* \brief This file contains the WLAN OID processing routines of Windows driver for
* MediaTek Inc. 802.11 Wireless LAN Adapters.
*/
/******************************************************************************
* C O M P I L E R F L A G S
*******************************************************************************
*/
/******************************************************************************
* E X T E R N A L R E F E R E N C E S
*******************************************************************************
*/
#include "precomp.h"
#include "mgmt/rsn.h"
#include "gl_wext.h"
#include "debug.h"
#include <stddef.h>
/******************************************************************************
* C O N S T A N T S
*******************************************************************************
*/
/******************************************************************************
* D A T A T Y P E S
*******************************************************************************
*/
/******************************************************************************
* P U B L I C D A T A
*******************************************************************************
*/
PARAM_CUSTOM_KEY_CFG_STRUCT_T g_rDefaulteSetting[] = {
/*format :
*: {"firmware config parameter", "firmware config value"}
*/
{"AdapScan", "0x0"}
};
/******************************************************************************
* P R I V A T E D A T A
*******************************************************************************
*/
/******************************************************************************
* M A C R O S
*******************************************************************************
*/
/******************************************************************************
* F U N C T I O N D E C L A R A T I O N S
*******************************************************************************
*/
#if DBG && 0
static VOID SetRCID(BOOLEAN fgOneTb3, BOOL *fgRCID);
#endif
#if CFG_SLT_SUPPORT
static VOID SetTestChannel(UINT_8 *pucPrimaryChannel);
#endif
/******************************************************************************
* F U N C T I O N S
*******************************************************************************
*/
#if CFG_ENABLE_STATISTICS_BUFFERING
static BOOLEAN IsBufferedStatisticsUsable(P_ADAPTER_T prAdapter)
{
ASSERT(prAdapter);
if (prAdapter->fgIsStatValid == TRUE &&
(kalGetTimeTick() - prAdapter->rStatUpdateTime) <= CFG_STATISTICS_VALID_CYCLE)
return TRUE;
else
return FALSE;
}
#endif
#if DBG && 0
static VOID SetRCID(BOOLEAN fgOneTb3, BOOL *fgRCID)
{
if (fgOneTb3)
*fgRCID = 0;
else
*fgRCID = 1;
}
#endif
#if CFG_SLT_SUPPORT
static VOID SetTestChannel(UINT_8 *pucPrimaryChannel)
{
if (*pucPrimaryChannel < 5)
*pucPrimaryChannel = 8;
else if (*pucPrimaryChannel > 10)
*pucPrimaryChannel = 3;
}
#endif
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to query the supported physical layer network
* type that can be used by the driver.
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[out] pvQueryBuffer A pointer to the buffer that holds the result of
* the query.
* \param[in] u4QueryBufferLen The length of the query buffer.
* \param[out] pu4QueryInfoLen If the call is successful, returns the number of
* bytes written into the query buffer. If the call
* failed due to invalid length of the query buffer,
* returns the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_INVALID_LENGTH
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidQueryNetworkTypesSupported(IN P_ADAPTER_T prAdapter,
OUT PVOID pvQueryBuffer, IN UINT_32 u4QueryBufferLen, OUT PUINT_32 pu4QueryInfoLen)
{
UINT_32 u4NumItem = 0;
ENUM_PARAM_NETWORK_TYPE_T eSupportedNetworks[PARAM_NETWORK_TYPE_NUM];
PPARAM_NETWORK_TYPE_LIST prSupported;
/* The array of all physical layer network subtypes that the driver supports. */
DEBUGFUNC("wlanoidQueryNetworkTypesSupported");
ASSERT(prAdapter);
ASSERT(pu4QueryInfoLen);
if (u4QueryBufferLen)
ASSERT(pvQueryBuffer);
/* Init. */
for (u4NumItem = 0; u4NumItem < PARAM_NETWORK_TYPE_NUM; u4NumItem++)
eSupportedNetworks[u4NumItem] = 0;
u4NumItem = 0;
eSupportedNetworks[u4NumItem] = PARAM_NETWORK_TYPE_DS;
u4NumItem++;
eSupportedNetworks[u4NumItem] = PARAM_NETWORK_TYPE_OFDM24;
u4NumItem++;
*pu4QueryInfoLen =
(UINT_32) OFFSET_OF(PARAM_NETWORK_TYPE_LIST, eNetworkType) +
(u4NumItem * sizeof(ENUM_PARAM_NETWORK_TYPE_T));
if (u4QueryBufferLen < *pu4QueryInfoLen)
return WLAN_STATUS_INVALID_LENGTH;
prSupported = (PPARAM_NETWORK_TYPE_LIST) pvQueryBuffer;
prSupported->NumberOfItems = u4NumItem;
kalMemCopy(prSupported->eNetworkType, eSupportedNetworks, u4NumItem * sizeof(ENUM_PARAM_NETWORK_TYPE_T));
DBGLOG(REQ, TRACE, "NDIS supported network type list: %ld\n", prSupported->NumberOfItems);
DBGLOG_MEM8(REQ, INFO, prSupported, *pu4QueryInfoLen);
return WLAN_STATUS_SUCCESS;
} /* wlanoidQueryNetworkTypesSupported */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to query the current physical layer network
* type used by the driver.
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[out] pvQueryBuffer A pointer to the buffer that holds the result of
* the query.
* \param[in] u4QueryBufferLen The length of the query buffer.
* \param[out] pu4QueryInfoLen If the call is successful, returns the number of
* bytes written into the query buffer. If the
* call failed due to invalid length of the query
* buffer, returns the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_BUFFER_TOO_SHORT
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidQueryNetworkTypeInUse(IN P_ADAPTER_T prAdapter,
OUT PVOID pvQueryBuffer, IN UINT_32 u4QueryBufferLen, OUT PUINT_32 pu4QueryInfoLen)
{
/* TODO: need to check the OID handler content again!! */
ENUM_PARAM_NETWORK_TYPE_T rCurrentNetworkTypeInUse = PARAM_NETWORK_TYPE_OFDM24;
DEBUGFUNC("wlanoidQueryNetworkTypeInUse");
ASSERT(prAdapter);
ASSERT(pu4QueryInfoLen);
if (u4QueryBufferLen)
ASSERT(pvQueryBuffer);
if (u4QueryBufferLen < sizeof(ENUM_PARAM_NETWORK_TYPE_T)) {
*pu4QueryInfoLen = sizeof(ENUM_PARAM_NETWORK_TYPE_T);
return WLAN_STATUS_BUFFER_TOO_SHORT;
}
if (kalGetMediaStateIndicated(prAdapter->prGlueInfo) == PARAM_MEDIA_STATE_CONNECTED)
rCurrentNetworkTypeInUse = (ENUM_PARAM_NETWORK_TYPE_T) (prAdapter->rWlanInfo.ucNetworkType);
else
rCurrentNetworkTypeInUse = (ENUM_PARAM_NETWORK_TYPE_T) (prAdapter->rWlanInfo.ucNetworkTypeInUse);
*(P_ENUM_PARAM_NETWORK_TYPE_T) pvQueryBuffer = rCurrentNetworkTypeInUse;
*pu4QueryInfoLen = sizeof(ENUM_PARAM_NETWORK_TYPE_T);
DBGLOG(REQ, TRACE, "Network type in use: %d\n", rCurrentNetworkTypeInUse);
return WLAN_STATUS_SUCCESS;
} /* wlanoidQueryNetworkTypeInUse */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to set the physical layer network type used
* by the driver.
*
* \param[in] pvAdapter Pointer to the Adapter structure.
* \param[in] pvSetBuffer A pointer to the buffer that holds the data to be set.
* \param[in] u4SetBufferLen The length of the set buffer.
* \param[out] pu4SetInfoLen If the call is successful, returns the number of
* bytes read from the set buffer. If the call failed
* due to invalid length of the set buffer, returns the
* amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS The given network type is supported and accepted.
* \retval WLAN_STATUS_INVALID_DATA The given network type is not in the
* supported list.
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidSetNetworkTypeInUse(IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
/* TODO: need to check the OID handler content again!! */
ENUM_PARAM_NETWORK_TYPE_T eNewNetworkType;
WLAN_STATUS rStatus = WLAN_STATUS_SUCCESS;
DEBUGFUNC("wlanoidSetNetworkTypeInUse");
ASSERT(prAdapter);
ASSERT(pvSetBuffer);
ASSERT(pu4SetInfoLen);
if (u4SetBufferLen < sizeof(ENUM_PARAM_NETWORK_TYPE_T)) {
*pu4SetInfoLen = sizeof(ENUM_PARAM_NETWORK_TYPE_T);
return WLAN_STATUS_INVALID_LENGTH;
}
eNewNetworkType = *(P_ENUM_PARAM_NETWORK_TYPE_T) pvSetBuffer;
*pu4SetInfoLen = sizeof(ENUM_PARAM_NETWORK_TYPE_T);
DBGLOG(REQ, INFO, "New network type: %d mode\n", eNewNetworkType);
switch (eNewNetworkType) {
case PARAM_NETWORK_TYPE_DS:
prAdapter->rWlanInfo.ucNetworkTypeInUse = (UINT_8) PARAM_NETWORK_TYPE_DS;
break;
case PARAM_NETWORK_TYPE_OFDM5:
prAdapter->rWlanInfo.ucNetworkTypeInUse = (UINT_8) PARAM_NETWORK_TYPE_OFDM5;
break;
case PARAM_NETWORK_TYPE_OFDM24:
prAdapter->rWlanInfo.ucNetworkTypeInUse = (UINT_8) PARAM_NETWORK_TYPE_OFDM24;
break;
case PARAM_NETWORK_TYPE_AUTOMODE:
prAdapter->rWlanInfo.ucNetworkTypeInUse = (UINT_8) PARAM_NETWORK_TYPE_AUTOMODE;
break;
case PARAM_NETWORK_TYPE_FH:
DBGLOG(REQ, INFO, "Not support network type: %d\n", eNewNetworkType);
rStatus = WLAN_STATUS_NOT_SUPPORTED;
break;
default:
DBGLOG(REQ, INFO, "Unknown network type: %d\n", eNewNetworkType);
rStatus = WLAN_STATUS_INVALID_DATA;
break;
}
/* Verify if we support the new network type. */
if (rStatus != WLAN_STATUS_SUCCESS)
DBGLOG(REQ, WARN, "Unknown network type: %d\n", eNewNetworkType);
return rStatus;
} /* wlanoidSetNetworkTypeInUse */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to query the current BSSID.
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[out] pvQueryBuffer A pointer to the buffer that holds the result of
* the query.
* \param[in] u4QueryBufferLen The length of the query buffer.
* \param[out] pu4QueryInfoLen If the call is successful, returns the number of
* bytes written into the query buffer. If the call
* failed due to invalid length of the query buffer,
* returns the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_ADAPTER_NOT_READY
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidQueryBssid(IN P_ADAPTER_T prAdapter,
OUT PVOID pvQueryBuffer, IN UINT_32 u4QueryBufferLen, OUT PUINT_32 pu4QueryInfoLen)
{
WLAN_STATUS rStatus = WLAN_STATUS_SUCCESS;
DEBUGFUNC("wlanoidQueryBssid");
ASSERT(prAdapter);
if (u4QueryBufferLen < MAC_ADDR_LEN) {
ASSERT(pu4QueryInfoLen);
*pu4QueryInfoLen = MAC_ADDR_LEN;
return WLAN_STATUS_BUFFER_TOO_SHORT;
}
ASSERT(u4QueryBufferLen >= MAC_ADDR_LEN);
if (u4QueryBufferLen)
ASSERT(pvQueryBuffer);
ASSERT(pu4QueryInfoLen);
if (kalGetMediaStateIndicated(prAdapter->prGlueInfo) == PARAM_MEDIA_STATE_CONNECTED)
kalMemCopy(pvQueryBuffer, prAdapter->rWlanInfo.rCurrBssId.arMacAddress, MAC_ADDR_LEN);
else if (prAdapter->rWifiVar.rConnSettings.eOPMode == NET_TYPE_IBSS) {
PARAM_MAC_ADDRESS aucTemp; /*!< BSSID */
COPY_MAC_ADDR(aucTemp, prAdapter->rWlanInfo.rCurrBssId.arMacAddress);
aucTemp[0] &= ~BIT(0);
aucTemp[1] |= BIT(1);
COPY_MAC_ADDR(pvQueryBuffer, aucTemp);
} else
rStatus = WLAN_STATUS_ADAPTER_NOT_READY;
*pu4QueryInfoLen = MAC_ADDR_LEN;
return rStatus;
} /* wlanoidQueryBssid */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to query the list of all BSSIDs detected by
* the driver.
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[out] pvQueryBuffer A pointer to the buffer that holds the result of
* the query.
* \param[in] u4QueryBufferLen The length of the query buffer.
* \param[out] pu4QueryInfoLen If the call is successful, returns the number of
* bytes written into the query buffer. If the call
* failed due to invalid length of the query buffer,
* returns the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_INVALID_LENGTH
* \retval WLAN_STATUS_ADAPTER_NOT_READY
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidQueryBssidList(IN P_ADAPTER_T prAdapter,
OUT PVOID pvQueryBuffer, IN UINT_32 u4QueryBufferLen, OUT PUINT_32 pu4QueryInfoLen)
{
P_GLUE_INFO_T prGlueInfo;
UINT_32 i, u4BssidListExLen;
P_PARAM_BSSID_LIST_EX_T prList;
P_PARAM_BSSID_EX_T prBssidEx;
PUINT_8 cp;
DEBUGFUNC("wlanoidQueryBssidList");
ASSERT(prAdapter);
ASSERT(pu4QueryInfoLen);
if (u4QueryBufferLen) {
ASSERT(pvQueryBuffer);
if (!pvQueryBuffer)
return WLAN_STATUS_INVALID_DATA;
}
prGlueInfo = prAdapter->prGlueInfo;
if (prAdapter->rAcpiState == ACPI_STATE_D3) {
DBGLOG(REQ, WARN,
"Fail in qeury BSSID list! (Adapter not ready). ACPI=D%d, Radio=%d\n",
prAdapter->rAcpiState, prAdapter->fgIsRadioOff);
return WLAN_STATUS_ADAPTER_NOT_READY;
}
u4BssidListExLen = 0;
if (prAdapter->fgIsRadioOff == FALSE) {
for (i = 0; i < prAdapter->rWlanInfo.u4ScanResultNum; i++)
u4BssidListExLen += ALIGN_4(prAdapter->rWlanInfo.arScanResult[i].u4Length);
}
if (u4BssidListExLen)
u4BssidListExLen += 4; /* u4NumberOfItems. */
else
u4BssidListExLen = sizeof(PARAM_BSSID_LIST_EX_T);
*pu4QueryInfoLen = u4BssidListExLen;
if (u4QueryBufferLen < *pu4QueryInfoLen)
return WLAN_STATUS_INVALID_LENGTH;
/* Clear the buffer */
kalMemZero(pvQueryBuffer, u4BssidListExLen);
prList = (P_PARAM_BSSID_LIST_EX_T) pvQueryBuffer;
cp = (PUINT_8) &prList->arBssid[0];
if (prAdapter->fgIsRadioOff == FALSE && prAdapter->rWlanInfo.u4ScanResultNum > 0) {
/* fill up for each entry */
for (i = 0; i < prAdapter->rWlanInfo.u4ScanResultNum; i++) {
prBssidEx = (P_PARAM_BSSID_EX_T) cp;
/* copy structure */
kalMemCopy(prBssidEx,
&(prAdapter->rWlanInfo.arScanResult[i]), OFFSET_OF(PARAM_BSSID_EX_T, aucIEs));
/*For WHQL test, Rssi should be in range -10 ~ -200 dBm */
if (prBssidEx->rRssi > PARAM_WHQL_RSSI_MAX_DBM)
prBssidEx->rRssi = PARAM_WHQL_RSSI_MAX_DBM;
if (prAdapter->rWlanInfo.arScanResult[i].u4IELength > 0) {
/* copy IEs */
kalMemCopy(prBssidEx->aucIEs,
prAdapter->rWlanInfo.apucScanResultIEs[i],
prAdapter->rWlanInfo.arScanResult[i].u4IELength);
}
/* 4-bytes alignement */
prBssidEx->u4Length = ALIGN_4(prBssidEx->u4Length);
cp += prBssidEx->u4Length;
prList->u4NumberOfItems++;
}
}
return WLAN_STATUS_SUCCESS;
} /* wlanoidQueryBssidList */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to request the driver to perform
* scanning.
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[in] pvSetBuffer Pointer to the buffer that holds the data to be set.
* \param[in] u4SetBufferLen The length of the set buffer.
* \param[out] pu4SetInfoLen If the call is successful, returns the number of
* bytes read from the set buffer. If the call failed
* due to invalid length of the set buffer, returns
* the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_ADAPTER_NOT_READY
* \retval WLAN_STATUS_FAILURE
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidSetBssidListScan(IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
P_PARAM_SSID_T prSsid;
PARAM_SSID_T rSsid;
DEBUGFUNC("wlanoidSetBssidListScan()");
if (prAdapter->rAcpiState == ACPI_STATE_D3) {
DBGLOG(REQ, WARN,
"Fail in set BSSID list scan! (Adapter not ready). ACPI=D%d, Radio=%d\n",
prAdapter->rAcpiState, prAdapter->fgIsRadioOff);
return WLAN_STATUS_ADAPTER_NOT_READY;
}
ASSERT(pu4SetInfoLen);
*pu4SetInfoLen = 0;
if (prAdapter->fgIsRadioOff) {
DBGLOG(REQ, WARN, "Return from BSSID list scan! (radio off). ACPI=D%d, Radio=%d\n",
prAdapter->rAcpiState, prAdapter->fgIsRadioOff);
return WLAN_STATUS_SUCCESS;
}
if (pvSetBuffer != NULL && u4SetBufferLen != 0) {
COPY_SSID(rSsid.aucSsid, rSsid.u4SsidLen, pvSetBuffer, u4SetBufferLen);
prSsid = &rSsid;
} else {
prSsid = NULL;
}
#if CFG_SUPPORT_RDD_TEST_MODE
if (prAdapter->prGlueInfo->rRegInfo.u4RddTestMode) {
if ((prAdapter->fgEnOnlineScan == TRUE) && (prAdapter->ucRddStatus)) {
if (kalGetMediaStateIndicated(prAdapter->prGlueInfo) != PARAM_MEDIA_STATE_CONNECTED)
aisFsmScanRequest(prAdapter, prSsid, NULL, 0);
else
return WLAN_STATUS_FAILURE;
} else
return WLAN_STATUS_FAILURE;
} else
#endif
{
if (prAdapter->fgEnOnlineScan == TRUE)
aisFsmScanRequest(prAdapter, prSsid, NULL, 0);
else if (kalGetMediaStateIndicated(prAdapter->prGlueInfo) != PARAM_MEDIA_STATE_CONNECTED)
aisFsmScanRequest(prAdapter, prSsid, NULL, 0);
else
return WLAN_STATUS_FAILURE;
}
return WLAN_STATUS_SUCCESS;
} /* wlanoidSetBssidListScan */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to request the driver to perform
* scanning with attaching information elements(IEs) specified from user space
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[in] pvSetBuffer Pointer to the buffer that holds the data to be set.
* \param[in] u4SetBufferLen The length of the set buffer.
* \param[out] pu4SetInfoLen If the call is successful, returns the number of
* bytes read from the set buffer. If the call failed
* due to invalid length of the set buffer, returns
* the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_ADAPTER_NOT_READY
* \retval WLAN_STATUS_FAILURE
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidSetBssidListScanExt(IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
P_PARAM_SCAN_REQUEST_EXT_T prScanRequest;
P_PARAM_SSID_T prSsid;
PUINT_8 pucIe;
UINT_32 u4IeLength;
DEBUGFUNC("wlanoidSetBssidListScanExt()");
if (prAdapter->rAcpiState == ACPI_STATE_D3) {
DBGLOG(REQ, WARN,
"Fail in set BSSID list scan! (Adapter not ready). ACPI=D%d, Radio=%d\n",
prAdapter->rAcpiState, prAdapter->fgIsRadioOff);
return WLAN_STATUS_ADAPTER_NOT_READY;
}
ASSERT(pu4SetInfoLen);
*pu4SetInfoLen = 0;
if (u4SetBufferLen != sizeof(PARAM_SCAN_REQUEST_EXT_T))
return WLAN_STATUS_INVALID_LENGTH;
if (prAdapter->fgIsRadioOff) {
DBGLOG(REQ, WARN, "Return from BSSID list scan! (radio off). ACPI=D%d, Radio=%d\n",
prAdapter->rAcpiState, prAdapter->fgIsRadioOff);
return WLAN_STATUS_SUCCESS;
}
DBGLOG(AIS, INFO, "ScanEX\n");
if (pvSetBuffer != NULL && u4SetBufferLen != 0) {
prScanRequest = (P_PARAM_SCAN_REQUEST_EXT_T) pvSetBuffer;
prSsid = &(prScanRequest->rSsid);
pucIe = prScanRequest->pucIE;
u4IeLength = prScanRequest->u4IELength;
} else {
prScanRequest = NULL;
prSsid = NULL;
pucIe = NULL;
u4IeLength = 0;
}
#if CFG_SUPPORT_RDD_TEST_MODE
if (prAdapter->prGlueInfo->rRegInfo.u4RddTestMode) {
if ((prAdapter->fgEnOnlineScan == TRUE) && (prAdapter->ucRddStatus)) {
if (kalGetMediaStateIndicated(prAdapter->prGlueInfo) != PARAM_MEDIA_STATE_CONNECTED)
aisFsmScanRequest(prAdapter, prSsid, pucIe, u4IeLength);
else
return WLAN_STATUS_FAILURE;
} else
return WLAN_STATUS_FAILURE;
} else
#endif
{
if (prAdapter->fgEnOnlineScan == TRUE)
aisFsmScanRequest(prAdapter, prSsid, pucIe, u4IeLength);
else if (kalGetMediaStateIndicated(prAdapter->prGlueInfo) != PARAM_MEDIA_STATE_CONNECTED)
aisFsmScanRequest(prAdapter, prSsid, pucIe, u4IeLength);
else
return WLAN_STATUS_FAILURE;
}
return WLAN_STATUS_SUCCESS;
} /* wlanoidSetBssidListScanWithIE */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to request the driver to perform
* scanning with attaching information elements(IEs) specified from user space
* and multiple SSID
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[in] pvSetBuffer Pointer to the buffer that holds the data to be set.
* \param[in] u4SetBufferLen The length of the set buffer.
* \param[out] pu4SetInfoLen If the call is successful, returns the number of
* bytes read from the set buffer. If the call failed
* due to invalid length of the set buffer, returns
* the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_ADAPTER_NOT_READY
* \retval WLAN_STATUS_FAILURE
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidSetBssidListScanAdv(IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
P_PARAM_SCAN_REQUEST_ADV_T prScanRequest;
PARAM_SSID_T rSsid[CFG_SCAN_SSID_MAX_NUM];
PUINT_8 pucIe;
UINT_8 ucSsidNum;
UINT_32 i, u4IeLength;
DEBUGFUNC("wlanoidSetBssidListScanAdv()");
if (prAdapter->rAcpiState == ACPI_STATE_D3) {
DBGLOG(REQ, WARN,
"Fail in set BSSID list scan! (Adapter not ready). ACPI=D%d, Radio=%d\n",
prAdapter->rAcpiState, prAdapter->fgIsRadioOff);
return WLAN_STATUS_ADAPTER_NOT_READY;
}
ASSERT(pu4SetInfoLen);
*pu4SetInfoLen = 0;
if (u4SetBufferLen != sizeof(PARAM_SCAN_REQUEST_ADV_T))
return WLAN_STATUS_INVALID_LENGTH;
else if (pvSetBuffer == NULL)
return WLAN_STATUS_INVALID_DATA;
if (prAdapter->fgIsRadioOff) {
DBGLOG(REQ, WARN, "Return from BSSID list scan! (radio off). ACPI=D%d, Radio=%d\n",
prAdapter->rAcpiState, prAdapter->fgIsRadioOff);
return WLAN_STATUS_SUCCESS;
}
prScanRequest = (P_PARAM_SCAN_REQUEST_ADV_T) pvSetBuffer;
ucSsidNum = (UINT_8) (prScanRequest->u4SsidNum);
for (i = 0; i < prScanRequest->u4SsidNum; i++) {
if (prScanRequest->rSsid[i].u4SsidLen > ELEM_MAX_LEN_SSID) {
DBGLOG(REQ, ERROR,
"[%s] SSID(%s) Length(%ld) is over than ELEM_MAX_LEN_SSID(%d)\n",
__func__, prScanRequest->rSsid[i].aucSsid,
prScanRequest->rSsid[i].u4SsidLen, ELEM_MAX_LEN_SSID);
DBGLOG_MEM8(REQ, ERROR, prScanRequest, sizeof(PARAM_SCAN_REQUEST_ADV_T));
}
COPY_SSID(rSsid[i].aucSsid,
rSsid[i].u4SsidLen, prScanRequest->rSsid[i].aucSsid, prScanRequest->rSsid[i].u4SsidLen);
}
pucIe = prScanRequest->pucIE;
u4IeLength = prScanRequest->u4IELength;
#if CFG_SUPPORT_RDD_TEST_MODE
if (prAdapter->prGlueInfo->rRegInfo.u4RddTestMode) {
if ((prAdapter->fgEnOnlineScan == TRUE) && (prAdapter->ucRddStatus)) {
if (kalGetMediaStateIndicated(prAdapter->prGlueInfo) != PARAM_MEDIA_STATE_CONNECTED)
#if CFG_SCAN_CHANNEL_SPECIFIED
aisFsmScanRequestAdv(prAdapter, ucSsidNum, rSsid,
prScanRequest->ucChannelListNum, prScanRequest->arChnlInfoList,
pucIe, u4IeLength);
#else
aisFsmScanRequestAdv(prAdapter, ucSsidNum, rSsid, 0, NULL, pucIe, u4IeLength);
#endif
else
return WLAN_STATUS_FAILURE;
} else
return WLAN_STATUS_FAILURE;
} else
#endif
{
if (prAdapter->fgEnOnlineScan == TRUE)
#if CFG_SCAN_CHANNEL_SPECIFIED
aisFsmScanRequestAdv(prAdapter, ucSsidNum, rSsid,
prScanRequest->ucChannelListNum, prScanRequest->arChnlInfoList,
pucIe, u4IeLength);
#else
aisFsmScanRequestAdv(prAdapter, ucSsidNum, rSsid, 0, NULL, pucIe, u4IeLength);
#endif
else if (kalGetMediaStateIndicated(prAdapter->prGlueInfo) != PARAM_MEDIA_STATE_CONNECTED)
#if CFG_SCAN_CHANNEL_SPECIFIED
aisFsmScanRequestAdv(prAdapter, ucSsidNum, rSsid,
prScanRequest->ucChannelListNum, prScanRequest->arChnlInfoList,
pucIe, u4IeLength);
#else
aisFsmScanRequestAdv(prAdapter, ucSsidNum, rSsid, 0, NULL, pucIe, u4IeLength);
#endif
else
return WLAN_STATUS_FAILURE;
}
cnmTimerStartTimer(prAdapter, &prAdapter->rWifiVar.rAisFsmInfo.rScanDoneTimer,
SEC_TO_MSEC(AIS_SCN_DONE_TIMEOUT_SEC));
return WLAN_STATUS_SUCCESS;
} /* wlanoidSetBssidListScanAdv */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine will initiate the join procedure to attempt to associate
* with the specified BSSID.
*
* \param[in] pvAdapter Pointer to the Adapter structure.
* \param[in] pvSetBuffer A pointer to the buffer that holds the data to be set.
* \param[in] u4SetBufferLen The length of the set buffer.
* \param[out] pu4SetInfoLen If the call is successful, returns the number of
* bytes read from the set buffer. If the call failed
* due to invalid length of the set buffer, returns
* the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_INVALID_LENGTH
* \retval WLAN_STATUS_INVALID_DATA
* \retval WLAN_STATUS_ADAPTER_NOT_READY
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidSetBssid(IN P_ADAPTER_T prAdapter, IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
P_GLUE_INFO_T prGlueInfo;
P_UINT_8 pAddr;
UINT_32 i;
INT_32 i4Idx = -1;
P_MSG_AIS_ABORT_T prAisAbortMsg;
UINT_8 ucReasonOfDisconnect;
ASSERT(prAdapter);
ASSERT(pu4SetInfoLen);
*pu4SetInfoLen = MAC_ADDR_LEN;
if (u4SetBufferLen != MAC_ADDR_LEN) {
*pu4SetInfoLen = MAC_ADDR_LEN;
return WLAN_STATUS_INVALID_LENGTH;
} else if (prAdapter->rAcpiState == ACPI_STATE_D3) {
DBGLOG(REQ, WARN, "Fail in set ssid! (Adapter not ready). ACPI=D%d, Radio=%d\n",
prAdapter->rAcpiState, prAdapter->fgIsRadioOff);
return WLAN_STATUS_ADAPTER_NOT_READY;
}
prGlueInfo = prAdapter->prGlueInfo;
pAddr = (P_UINT_8) pvSetBuffer;
/* re-association check */
if (kalGetMediaStateIndicated(prGlueInfo) == PARAM_MEDIA_STATE_CONNECTED) {
if (EQUAL_MAC_ADDR(prAdapter->rWlanInfo.rCurrBssId.arMacAddress, pAddr)) {
kalSetMediaStateIndicated(prGlueInfo, PARAM_MEDIA_STATE_TO_BE_INDICATED);
ucReasonOfDisconnect = DISCONNECT_REASON_CODE_REASSOCIATION;
} else {
kalIndicateStatusAndComplete(prGlueInfo, WLAN_STATUS_MEDIA_DISCONNECT, NULL, 0);
ucReasonOfDisconnect = DISCONNECT_REASON_CODE_NEW_CONNECTION;
}
} else {
ucReasonOfDisconnect = DISCONNECT_REASON_CODE_NEW_CONNECTION;
}
/* check if any scanned result matchs with the BSSID */
for (i = 0; i < prAdapter->rWlanInfo.u4ScanResultNum; i++) {
if (EQUAL_MAC_ADDR(prAdapter->rWlanInfo.arScanResult[i].arMacAddress, pAddr)) {
i4Idx = (INT_32) i;
break;
}
}
/* prepare message to AIS */
if (prAdapter->rWifiVar.rConnSettings.eOPMode == NET_TYPE_IBSS
|| prAdapter->rWifiVar.rConnSettings.eOPMode == NET_TYPE_DEDICATED_IBSS) {
/* IBSS *//* beacon period */
prAdapter->rWifiVar.rConnSettings.u2BeaconPeriod = prAdapter->rWlanInfo.u2BeaconPeriod;
prAdapter->rWifiVar.rConnSettings.u2AtimWindow = prAdapter->rWlanInfo.u2AtimWindow;
}
/* Set Connection Request Issued Flag */
prAdapter->rWifiVar.rConnSettings.fgIsConnReqIssued = TRUE;
prAdapter->rWifiVar.rConnSettings.eConnectionPolicy = CONNECT_BY_BSSID;
/* Send AIS Abort Message */
prAisAbortMsg = (P_MSG_AIS_ABORT_T) cnmMemAlloc(prAdapter, RAM_TYPE_MSG, sizeof(MSG_AIS_ABORT_T));
if (!prAisAbortMsg) {
DBGLOG(REQ, ERROR, "Fail in allocating AisAbortMsg.\n");
return WLAN_STATUS_FAILURE;
}
prAisAbortMsg->rMsgHdr.eMsgId = MID_OID_AIS_FSM_JOIN_REQ;
prAisAbortMsg->ucReasonOfDisconnect = ucReasonOfDisconnect;
/* Update the information to CONNECTION_SETTINGS_T */
prAdapter->rWifiVar.rConnSettings.ucSSIDLen = 0;
prAdapter->rWifiVar.rConnSettings.aucSSID[0] = '\0';
COPY_MAC_ADDR(prAdapter->rWifiVar.rConnSettings.aucBSSID, pAddr);
if (EQUAL_MAC_ADDR(prAdapter->rWlanInfo.rCurrBssId.arMacAddress, pAddr))
prAisAbortMsg->fgDelayIndication = TRUE;
else
prAisAbortMsg->fgDelayIndication = FALSE;
mboxSendMsg(prAdapter, MBOX_ID_0, (P_MSG_HDR_T) prAisAbortMsg, MSG_SEND_METHOD_BUF);
return WLAN_STATUS_SUCCESS;
} /* end of wlanoidSetBssid() */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine will initiate the join procedure to attempt
* to associate with the new SSID. If the previous scanning
* result is aged, we will scan the channels at first.
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[in] pvSetBuffer Pointer to the buffer that holds the data to be set.
* \param[in] u4SetBufferLen The length of the set buffer.
* \param[out] pu4SetInfoLen If the call is successful, returns the number of
* bytes read from the set buffer. If the call failed
* due to invalid length of the set buffer, returns
* the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_INVALID_DATA
* \retval WLAN_STATUS_ADAPTER_NOT_READY
* \retval WLAN_STATUS_INVALID_LENGTH
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidSetSsid(IN P_ADAPTER_T prAdapter, IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
P_GLUE_INFO_T prGlueInfo;
P_PARAM_SSID_T pParamSsid;
UINT_32 i;
INT_32 i4Idx = -1, i4MaxRSSI = INT_MIN;
P_MSG_AIS_ABORT_T prAisAbortMsg;
BOOLEAN fgIsValidSsid = TRUE;
ASSERT(prAdapter);
ASSERT(pu4SetInfoLen);
/* MSDN:
* Powering on the radio if the radio is powered off through a setting of OID_802_11_DISASSOCIATE
*/
if (prAdapter->fgIsRadioOff == TRUE)
prAdapter->fgIsRadioOff = FALSE;
if (u4SetBufferLen < sizeof(PARAM_SSID_T) || u4SetBufferLen > sizeof(PARAM_SSID_T))
return WLAN_STATUS_INVALID_LENGTH;
else if (prAdapter->rAcpiState == ACPI_STATE_D3) {
DBGLOG(REQ, WARN, "Fail in set ssid! (Adapter not ready). ACPI=D%d, Radio=%d\n",
prAdapter->rAcpiState, prAdapter->fgIsRadioOff);
return WLAN_STATUS_ADAPTER_NOT_READY;
}
pParamSsid = (P_PARAM_SSID_T) pvSetBuffer;
if (pParamSsid->u4SsidLen > 32)
return WLAN_STATUS_INVALID_LENGTH;
prGlueInfo = prAdapter->prGlueInfo;
/* prepare for CMD_BUILD_CONNECTION & CMD_GET_CONNECTION_STATUS */
/* re-association check */
if (kalGetMediaStateIndicated(prGlueInfo) == PARAM_MEDIA_STATE_CONNECTED) {
if (EQUAL_SSID(prAdapter->rWlanInfo.rCurrBssId.rSsid.aucSsid,
prAdapter->rWlanInfo.rCurrBssId.rSsid.u4SsidLen,
pParamSsid->aucSsid, pParamSsid->u4SsidLen)) {
kalSetMediaStateIndicated(prGlueInfo, PARAM_MEDIA_STATE_TO_BE_INDICATED);
} else
kalIndicateStatusAndComplete(prGlueInfo, WLAN_STATUS_MEDIA_DISCONNECT, NULL, 0);
}
/* check if any scanned result matchs with the SSID */
for (i = 0; i < prAdapter->rWlanInfo.u4ScanResultNum; i++) {
PUINT_8 aucSsid = prAdapter->rWlanInfo.arScanResult[i].rSsid.aucSsid;
UINT_8 ucSsidLength = (UINT_8) prAdapter->rWlanInfo.arScanResult[i].rSsid.u4SsidLen;
INT_32 i4RSSI = prAdapter->rWlanInfo.arScanResult[i].rRssi;
if (EQUAL_SSID(aucSsid, ucSsidLength, pParamSsid->aucSsid, pParamSsid->u4SsidLen) &&
i4RSSI >= i4MaxRSSI) {
i4Idx = (INT_32) i;
i4MaxRSSI = i4RSSI;
}
}
/* prepare message to AIS */
if (prAdapter->rWifiVar.rConnSettings.eOPMode == NET_TYPE_IBSS
|| prAdapter->rWifiVar.rConnSettings.eOPMode == NET_TYPE_DEDICATED_IBSS) {
/* IBSS *//* beacon period */
prAdapter->rWifiVar.rConnSettings.u2BeaconPeriod = prAdapter->rWlanInfo.u2BeaconPeriod;
prAdapter->rWifiVar.rConnSettings.u2AtimWindow = prAdapter->rWlanInfo.u2AtimWindow;
}
if (prAdapter->rWifiVar.fgSupportWZCDisassociation) {
if (pParamSsid->u4SsidLen == ELEM_MAX_LEN_SSID) {
fgIsValidSsid = FALSE;
for (i = 0; i < ELEM_MAX_LEN_SSID; i++) {
if (!((pParamSsid->aucSsid[i] > 0)
&& (pParamSsid->aucSsid[i] <= 0x1F))) {
fgIsValidSsid = TRUE;
break;
}
}
}
}
/* Set Connection Request Issued Flag */
if (fgIsValidSsid) {
prAdapter->rWifiVar.rConnSettings.fgIsConnReqIssued = TRUE;
if (pParamSsid->u4SsidLen)
prAdapter->rWifiVar.rConnSettings.eConnectionPolicy = CONNECT_BY_SSID_BEST_RSSI;
else
/* wildcard SSID */
prAdapter->rWifiVar.rConnSettings.eConnectionPolicy = CONNECT_BY_SSID_ANY;
} else
prAdapter->rWifiVar.rConnSettings.fgIsConnReqIssued = FALSE;
/* Send AIS Abort Message */
prAisAbortMsg = (P_MSG_AIS_ABORT_T) cnmMemAlloc(prAdapter, RAM_TYPE_MSG, sizeof(MSG_AIS_ABORT_T));
if (!prAisAbortMsg) {
DBGLOG(REQ, ERROR, "Fail in allocating AisAbortMsg.\n");
return WLAN_STATUS_FAILURE;
}
prAisAbortMsg->rMsgHdr.eMsgId = MID_OID_AIS_FSM_JOIN_REQ;
prAisAbortMsg->ucReasonOfDisconnect = DISCONNECT_REASON_CODE_NEW_CONNECTION;
COPY_SSID(prAdapter->rWifiVar.rConnSettings.aucSSID,
prAdapter->rWifiVar.rConnSettings.ucSSIDLen, pParamSsid->aucSsid, (UINT_8) pParamSsid->u4SsidLen);
if (EQUAL_SSID(prAdapter->rWlanInfo.rCurrBssId.rSsid.aucSsid,
prAdapter->rWlanInfo.rCurrBssId.rSsid.u4SsidLen, pParamSsid->aucSsid, pParamSsid->u4SsidLen)) {
prAisAbortMsg->fgDelayIndication = TRUE;
} else {
/* Update the information to CONNECTION_SETTINGS_T */
prAisAbortMsg->fgDelayIndication = FALSE;
}
DBGLOG(SCN, INFO, "SSID %s\n", prAdapter->rWifiVar.rConnSettings.aucSSID);
mboxSendMsg(prAdapter, MBOX_ID_0, (P_MSG_HDR_T) prAisAbortMsg, MSG_SEND_METHOD_BUF);
return WLAN_STATUS_SUCCESS;
} /* end of wlanoidSetSsid() */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine will initiate the join procedure to attempt
* to associate with the new BSS, base on given SSID, BSSID, and freqency.
* If the target connecting BSS is in the same ESS as current connected BSS, roaming
* will be performed.
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[in] pvSetBuffer Pointer to the buffer that holds the data to be set.
* \param[in] u4SetBufferLen The length of the set buffer.
* \param[out] pu4SetInfoLen If the call is successful, returns the number of
* bytes read from the set buffer. If the call failed
* due to invalid length of the set buffer, returns
* the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_INVALID_DATA
* \retval WLAN_STATUS_ADAPTER_NOT_READY
* \retval WLAN_STATUS_INVALID_LENGTH
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidSetConnect(IN P_ADAPTER_T prAdapter, IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
P_GLUE_INFO_T prGlueInfo;
P_PARAM_CONNECT_T pParamConn;
P_CONNECTION_SETTINGS_T prConnSettings;
UINT_32 i;
P_MSG_AIS_ABORT_T prAisAbortMsg;
BOOLEAN fgIsValidSsid = TRUE;
BOOLEAN fgEqualSsid = FALSE;
BOOLEAN fgEqualBssid = FALSE;
const UINT_8 aucZeroMacAddr[] = NULL_MAC_ADDR;
ASSERT(prAdapter);
ASSERT(pu4SetInfoLen);
/* MSDN:
* Powering on the radio if the radio is powered off through a setting of OID_802_11_DISASSOCIATE
*/
if (prAdapter->fgIsRadioOff == TRUE)
prAdapter->fgIsRadioOff = FALSE;
if (u4SetBufferLen != sizeof(PARAM_CONNECT_T))
return WLAN_STATUS_INVALID_LENGTH;
else if (prAdapter->rAcpiState == ACPI_STATE_D3) {
DBGLOG(REQ, WARN, "Fail in set ssid! (Adapter not ready). ACPI=D%d, Radio=%d\n",
prAdapter->rAcpiState, prAdapter->fgIsRadioOff);
return WLAN_STATUS_ADAPTER_NOT_READY;
}
prAisAbortMsg = (P_MSG_AIS_ABORT_T) cnmMemAlloc(prAdapter, RAM_TYPE_MSG, sizeof(MSG_AIS_ABORT_T));
if (!prAisAbortMsg) {
DBGLOG(REQ, ERROR, "Fail in allocating AisAbortMsg.\n");
return WLAN_STATUS_FAILURE;
}
prAisAbortMsg->rMsgHdr.eMsgId = MID_OID_AIS_FSM_JOIN_REQ;
pParamConn = (P_PARAM_CONNECT_T) pvSetBuffer;
prConnSettings = &prAdapter->rWifiVar.rConnSettings;
if (pParamConn->u4SsidLen > 32)
return WLAN_STATUS_INVALID_LENGTH;
else if (!pParamConn->pucBssid && !pParamConn->pucSsid)
return WLAN_STATUS_INVALID_LENGTH;
prGlueInfo = prAdapter->prGlueInfo;
kalMemZero(prConnSettings->aucSSID, sizeof(prConnSettings->aucSSID));
prConnSettings->ucSSIDLen = 0;
kalMemZero(prConnSettings->aucBSSID, sizeof(prConnSettings->aucBSSID));
prConnSettings->eConnectionPolicy = CONNECT_BY_SSID_ANY;
prConnSettings->fgIsConnByBssidIssued = FALSE;
if (pParamConn->pucSsid) {
prConnSettings->eConnectionPolicy = CONNECT_BY_SSID_BEST_RSSI;
COPY_SSID(prConnSettings->aucSSID,
prConnSettings->ucSSIDLen, pParamConn->pucSsid, (UINT_8) pParamConn->u4SsidLen);
if (EQUAL_SSID(prAdapter->rWlanInfo.rCurrBssId.rSsid.aucSsid,
prAdapter->rWlanInfo.rCurrBssId.rSsid.u4SsidLen,
pParamConn->pucSsid, pParamConn->u4SsidLen))
fgEqualSsid = TRUE;
}
if (pParamConn->pucBssid) {
if (!EQUAL_MAC_ADDR(aucZeroMacAddr, pParamConn->pucBssid) && IS_UCAST_MAC_ADDR(pParamConn->pucBssid)) {
prConnSettings->eConnectionPolicy = CONNECT_BY_BSSID;
prConnSettings->fgIsConnByBssidIssued = TRUE;
COPY_MAC_ADDR(prConnSettings->aucBSSID, pParamConn->pucBssid);
if (EQUAL_MAC_ADDR(prAdapter->rWlanInfo.rCurrBssId.arMacAddress, pParamConn->pucBssid))
fgEqualBssid = TRUE;
} else
DBGLOG(INIT, INFO, "wrong bssid " MACSTR "to connect\n", MAC2STR(pParamConn->pucBssid));
} else
DBGLOG(INIT, INFO, "No Bssid set\n");
prConnSettings->u4FreqInKHz = pParamConn->u4CenterFreq;
/* prepare for CMD_BUILD_CONNECTION & CMD_GET_CONNECTION_STATUS */
/* re-association check */
if (kalGetMediaStateIndicated(prGlueInfo) == PARAM_MEDIA_STATE_CONNECTED) {
if (fgEqualSsid) {
prAisAbortMsg->ucReasonOfDisconnect = DISCONNECT_REASON_CODE_REASSOCIATION;
if (fgEqualBssid)
kalSetMediaStateIndicated(prGlueInfo, PARAM_MEDIA_STATE_TO_BE_INDICATED);
} else {
DBGLOG(INIT, INFO, "DisBySsid\n");
kalIndicateStatusAndComplete(prGlueInfo, WLAN_STATUS_MEDIA_DISCONNECT, NULL, 0);
prAisAbortMsg->ucReasonOfDisconnect = DISCONNECT_REASON_CODE_NEW_CONNECTION;
}
} else
prAisAbortMsg->ucReasonOfDisconnect = DISCONNECT_REASON_CODE_NEW_CONNECTION;
#if 0
/* check if any scanned result matchs with the SSID */
for (i = 0; i < prAdapter->rWlanInfo.u4ScanResultNum; i++) {
PUINT_8 aucSsid = prAdapter->rWlanInfo.arScanResult[i].rSsid.aucSsid;
UINT_8 ucSsidLength = (UINT_8) prAdapter->rWlanInfo.arScanResult[i].rSsid.u4SsidLen;
INT_32 i4RSSI = prAdapter->rWlanInfo.arScanResult[i].rRssi;
if (EQUAL_SSID(aucSsid, ucSsidLength, pParamConn->pucSsid, pParamConn->u4SsidLen) &&
i4RSSI >= i4MaxRSSI) {
i4Idx = (INT_32) i;
i4MaxRSSI = i4RSSI;
}
if (EQUAL_MAC_ADDR(prAdapter->rWlanInfo.arScanResult[i].arMacAddress, pAddr)) {
i4Idx = (INT_32) i;
break;
}
}
#endif
/* prepare message to AIS */
if (prConnSettings->eOPMode == NET_TYPE_IBSS || prConnSettings->eOPMode == NET_TYPE_DEDICATED_IBSS) {
/* IBSS *//* beacon period */
prConnSettings->u2BeaconPeriod = prAdapter->rWlanInfo.u2BeaconPeriod;
prConnSettings->u2AtimWindow = prAdapter->rWlanInfo.u2AtimWindow;
}
if (prAdapter->rWifiVar.fgSupportWZCDisassociation) {
if (pParamConn->u4SsidLen == ELEM_MAX_LEN_SSID) {
fgIsValidSsid = FALSE;
if (pParamConn->pucSsid) {
for (i = 0; i < ELEM_MAX_LEN_SSID; i++) {
if (!((pParamConn->pucSsid[i] > 0) && (pParamConn->pucSsid[i] <= 0x1F))) {
fgIsValidSsid = TRUE;
break;
}
}
} else {
DBGLOG(INIT, ERROR, "pParamConn->pucSsid is NULL\n");
}
}
}
/* Set Connection Request Issued Flag */
if (fgIsValidSsid)
prConnSettings->fgIsConnReqIssued = TRUE;
else
prConnSettings->fgIsConnReqIssued = FALSE;
if (fgEqualSsid || fgEqualBssid)
prAisAbortMsg->fgDelayIndication = TRUE;
else
/* Update the information to CONNECTION_SETTINGS_T */
prAisAbortMsg->fgDelayIndication = FALSE;
mboxSendMsg(prAdapter, MBOX_ID_0, (P_MSG_HDR_T) prAisAbortMsg, MSG_SEND_METHOD_BUF);
DBGLOG(INIT, INFO, "ssid %s, bssid " MACSTR ", conn policy %d, disc reason %d\n",
prConnSettings->aucSSID, MAC2STR(prConnSettings->aucBSSID),
prConnSettings->eConnectionPolicy, prAisAbortMsg->ucReasonOfDisconnect);
return WLAN_STATUS_SUCCESS;
} /* end of wlanoidSetConnect */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to query the currently associated SSID.
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[in] pvQueryBuffer Pointer to the buffer that holds the result of
* the query.
* \param[in] u4QueryBufferLen The length of the query buffer.
* \param[out] pu4QueryInfoLen If the call is successful, returns the number of
* bytes written into the query buffer. If the call
* failed due to invalid length of the query buffer,
* returns the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_INVALID_LENGTH
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidQuerySsid(IN P_ADAPTER_T prAdapter,
OUT PVOID pvQueryBuffer, IN UINT_32 u4QueryBufferLen, OUT PUINT_32 pu4QueryInfoLen)
{
P_PARAM_SSID_T prAssociatedSsid;
DEBUGFUNC("wlanoidQuerySsid");
ASSERT(prAdapter);
ASSERT(pu4QueryInfoLen);
if (u4QueryBufferLen)
ASSERT(pvQueryBuffer);
*pu4QueryInfoLen = sizeof(PARAM_SSID_T);
/* Check for query buffer length */
if (u4QueryBufferLen < *pu4QueryInfoLen) {
DBGLOG(REQ, WARN, "Invalid length %lu\n", u4QueryBufferLen);
return WLAN_STATUS_INVALID_LENGTH;
}
prAssociatedSsid = (P_PARAM_SSID_T) pvQueryBuffer;
kalMemZero(prAssociatedSsid->aucSsid, sizeof(prAssociatedSsid->aucSsid));
if (kalGetMediaStateIndicated(prAdapter->prGlueInfo) == PARAM_MEDIA_STATE_CONNECTED) {
prAssociatedSsid->u4SsidLen = prAdapter->rWlanInfo.rCurrBssId.rSsid.u4SsidLen;
if (prAssociatedSsid->u4SsidLen) {
kalMemCopy(prAssociatedSsid->aucSsid,
prAdapter->rWlanInfo.rCurrBssId.rSsid.aucSsid, prAssociatedSsid->u4SsidLen);
}
} else {
prAssociatedSsid->u4SsidLen = 0;
DBGLOG(REQ, TRACE, "Null SSID\n");
}
return WLAN_STATUS_SUCCESS;
} /* wlanoidQuerySsid */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to query the current 802.11 network type.
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[in] pvQueryBuffer Pointer to the buffer that holds the result of
* the query.
* \param[in] u4QueryBufferLen The length of the query buffer.
* \param[out] pu4QueryInfoLen If the call is successful, returns the number of
* bytes written into the query buffer. If the call
* failed due to invalid length of the query buffer,
* returns the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_BUFFER_TOO_SHORT
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidQueryInfrastructureMode(IN P_ADAPTER_T prAdapter,
OUT PVOID pvQueryBuffer, IN UINT_32 u4QueryBufferLen, OUT PUINT_32 pu4QueryInfoLen)
{
DEBUGFUNC("wlanoidQueryInfrastructureMode");
ASSERT(prAdapter);
ASSERT(pu4QueryInfoLen);
*pu4QueryInfoLen = sizeof(ENUM_PARAM_OP_MODE_T);
if (u4QueryBufferLen < sizeof(ENUM_PARAM_OP_MODE_T))
return WLAN_STATUS_BUFFER_TOO_SHORT;
if (u4QueryBufferLen)
ASSERT(pvQueryBuffer);
*(P_ENUM_PARAM_OP_MODE_T) pvQueryBuffer = prAdapter->rWifiVar.rConnSettings.eOPMode;
/*
** According to OID_802_11_INFRASTRUCTURE_MODE
** If there is no prior OID_802_11_INFRASTRUCTURE_MODE,
** NDIS_STATUS_ADAPTER_NOT_READY shall be returned.
*/
#if DBG
switch (*(P_ENUM_PARAM_OP_MODE_T) pvQueryBuffer) {
case NET_TYPE_IBSS:
DBGLOG(REQ, INFO, "IBSS mode\n");
break;
case NET_TYPE_INFRA:
DBGLOG(REQ, INFO, "Infrastructure mode\n");
break;
default:
DBGLOG(REQ, INFO, "Automatic mode\n");
}
#endif
return WLAN_STATUS_SUCCESS;
} /* wlanoidQueryInfrastructureMode */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to set mode to infrastructure or
* IBSS, or automatic switch between the two.
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[in] pvSetBuffer Pointer to the buffer that holds the data to be set.
* \param[in] u4SetBufferLen The length of the set buffer.
* \param[out] pu4SetInfoLen If the call is successful, returns the number of
* bytes read from the set buffer. If the call failed due to invalid
* length of the set buffer, returns the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_INVALID_DATA
* \retval WLAN_STATUS_ADAPTER_NOT_READY
* \retval WLAN_STATUS_INVALID_LENGTH
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidSetInfrastructureMode(IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
P_GLUE_INFO_T prGlueInfo;
ENUM_PARAM_OP_MODE_T eOpMode;
/* P_WLAN_TABLE_T prWlanTable; */
#if CFG_SUPPORT_802_11W
/* P_AIS_SPECIFIC_BSS_INFO_T prAisSpecBssInfo; */
#endif
/* P_BSS_INFO_T prBssInfo; */
/* UINT_8 i; */
DEBUGFUNC("wlanoidSetInfrastructureMode");
ASSERT(prAdapter);
ASSERT(pvSetBuffer);
ASSERT(pu4SetInfoLen);
prGlueInfo = prAdapter->prGlueInfo;
if (u4SetBufferLen < sizeof(ENUM_PARAM_OP_MODE_T))
return WLAN_STATUS_BUFFER_TOO_SHORT;
*pu4SetInfoLen = sizeof(ENUM_PARAM_OP_MODE_T);
if (prAdapter->rAcpiState == ACPI_STATE_D3) {
DBGLOG(REQ, WARN,
"Fail in set infrastructure mode! (Adapter not ready). ACPI=D%d, Radio=%d\n",
prAdapter->rAcpiState, prAdapter->fgIsRadioOff);
return WLAN_STATUS_ADAPTER_NOT_READY;
}
eOpMode = *(P_ENUM_PARAM_OP_MODE_T) pvSetBuffer;
/* Verify the new infrastructure mode. */
if (eOpMode >= NET_TYPE_NUM) {
DBGLOG(REQ, TRACE, "Invalid mode value %d\n", eOpMode);
return WLAN_STATUS_INVALID_DATA;
}
/* check if possible to switch to AdHoc mode */
if (eOpMode == NET_TYPE_IBSS || eOpMode == NET_TYPE_DEDICATED_IBSS) {
if (cnmAisIbssIsPermitted(prAdapter) == FALSE) {
DBGLOG(REQ, TRACE, "Mode value %d unallowed\n", eOpMode);
return WLAN_STATUS_FAILURE;
}
}
/* Save the new infrastructure mode setting. */
prAdapter->rWifiVar.rConnSettings.eOPMode = eOpMode;
prAdapter->rWifiVar.rConnSettings.fgWapiMode = FALSE;
#if CFG_SUPPORT_WAPI
prAdapter->prGlueInfo->u2WapiAssocInfoIESz = 0;
kalMemZero(&prAdapter->prGlueInfo->aucWapiAssocInfoIEs, 42);
#endif
#if CFG_SUPPORT_802_11W
prAdapter->rWifiVar.rAisSpecificBssInfo.fgMgmtProtection = FALSE;
prAdapter->rWifiVar.rAisSpecificBssInfo.fgBipKeyInstalled = FALSE;
#endif
#if CFG_SUPPORT_WPS2
kalMemZero(&prAdapter->prGlueInfo->aucWSCAssocInfoIE, 200);
prAdapter->prGlueInfo->u2WSCAssocInfoIELen = 0;
#endif
#if 0 /* STA record remove at AIS_ABORT nicUpdateBss and DISCONNECT */
for (i = 0; i < BSS_INFO_NUM; i++) {
prBssInfo = prAdapter->aprBssInfo[i];
if (prBssInfo->eNetworkType == NETWORK_TYPE_AIS)
cnmStaFreeAllStaByNetwork(prAdapter, prBssInfo->ucBssIndex, 0);
}
#endif
/* Clean up the Tx key flag */
prAdapter->prAisBssInfo->fgBcDefaultKeyExist = FALSE;
prAdapter->prAisBssInfo->ucBcDefaultKeyIdx = 0xFF;
/* prWlanTable = prAdapter->rWifiVar.arWtbl; */
/* prWlanTable[prAdapter->prAisBssInfo->ucBMCWlanIndex].ucKeyId = 0; */
#if DBG
DBGLOG(RSN, TRACE, "wlanoidSetInfrastructureMode\n");
#endif
return wlanSendSetQueryCmd(prAdapter,
CMD_ID_INFRASTRUCTURE,
TRUE,
FALSE,
TRUE,
nicCmdEventSetCommon, nicOidCmdTimeoutCommon, 0, NULL, pvSetBuffer, u4SetBufferLen);
} /* wlanoidSetInfrastructureMode */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to query the current 802.11 authentication
* mode.
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[out] pvQueryBuffer A pointer to the buffer that holds the result of
* the query.
* \param[in] u4QueryBufferLen The length of the query buffer.
* \param[out] pu4QueryInfoLen If the call is successful, returns the number of
* bytes written into the query buffer. If the call
* failed due to invalid length of the query buffer,
* returns the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_BUFFER_TOO_SHORT
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidQueryAuthMode(IN P_ADAPTER_T prAdapter,
OUT PVOID pvQueryBuffer, IN UINT_32 u4QueryBufferLen, OUT PUINT_32 pu4QueryInfoLen)
{
DEBUGFUNC("wlanoidQueryAuthMode");
ASSERT(prAdapter);
if (u4QueryBufferLen)
ASSERT(pvQueryBuffer);
ASSERT(pu4QueryInfoLen);
*pu4QueryInfoLen = sizeof(ENUM_PARAM_AUTH_MODE_T);
if (u4QueryBufferLen < sizeof(ENUM_PARAM_AUTH_MODE_T))
return WLAN_STATUS_BUFFER_TOO_SHORT;
*(P_ENUM_PARAM_AUTH_MODE_T) pvQueryBuffer = prAdapter->rWifiVar.rConnSettings.eAuthMode;
#if DBG
switch (*(P_ENUM_PARAM_AUTH_MODE_T) pvQueryBuffer) {
case AUTH_MODE_OPEN:
DBGLOG(REQ, INFO, "Current auth mode: Open\n");
break;
case AUTH_MODE_SHARED:
DBGLOG(REQ, INFO, "Current auth mode: Shared\n");
break;
case AUTH_MODE_AUTO_SWITCH:
DBGLOG(REQ, INFO, "Current auth mode: Auto-switch\n");
break;
case AUTH_MODE_WPA:
DBGLOG(REQ, INFO, "Current auth mode: WPA\n");
break;
case AUTH_MODE_WPA_PSK:
DBGLOG(REQ, INFO, "Current auth mode: WPA PSK\n");
break;
case AUTH_MODE_WPA_NONE:
DBGLOG(REQ, INFO, "Current auth mode: WPA None\n");
break;
case AUTH_MODE_WPA2:
DBGLOG(REQ, INFO, "Current auth mode: WPA2\n");
break;
case AUTH_MODE_WPA2_PSK:
DBGLOG(REQ, INFO, "Current auth mode: WPA2 PSK\n");
break;
default:
DBGLOG(REQ, INFO, "Current auth mode: %d\n", *(P_ENUM_PARAM_AUTH_MODE_T) pvQueryBuffer);
break;
}
#endif
return WLAN_STATUS_SUCCESS;
} /* wlanoidQueryAuthMode */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to set the IEEE 802.11 authentication mode
* to the driver.
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[in] pvSetBuffer A pointer to the buffer that holds the data to be set.
* \param[in] u4SetBufferLen The length of the set buffer.
* \param[out] pu4SetInfoLen If the call is successful, returns the number of
* bytes read from the set buffer. If the call failed
* due to invalid length of the set buffer, returns
* the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_INVALID_DATA
* \retval WLAN_STATUS_INVALID_LENGTH
* \retval WLAN_STATUS_ADAPTER_NOT_READY
* \retval WLAN_STATUS_NOT_ACCEPTED
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidSetAuthMode(IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
P_GLUE_INFO_T prGlueInfo;
/* UINT_32 i, u4AkmSuite; */
/* P_DOT11_RSNA_CONFIG_AUTHENTICATION_SUITES_ENTRY prEntry; */
DEBUGFUNC("wlanoidSetAuthMode");
ASSERT(prAdapter);
ASSERT(pu4SetInfoLen);
ASSERT(pvSetBuffer);
prGlueInfo = prAdapter->prGlueInfo;
*pu4SetInfoLen = sizeof(ENUM_PARAM_AUTH_MODE_T);
if (u4SetBufferLen < sizeof(ENUM_PARAM_AUTH_MODE_T))
return WLAN_STATUS_INVALID_LENGTH;
/* RF Test */
/* if (IS_ARB_IN_RFTEST_STATE(prAdapter)) { */
/* return WLAN_STATUS_SUCCESS; */
/* } */
if (prAdapter->rAcpiState == ACPI_STATE_D3) {
DBGLOG(REQ, WARN,
"Fail in set Authentication mode! (Adapter not ready). ACPI=D%d, Radio=%d\n",
prAdapter->rAcpiState, prAdapter->fgIsRadioOff);
return WLAN_STATUS_ADAPTER_NOT_READY;
}
/* Check if the new authentication mode is valid. */
if (*(P_ENUM_PARAM_AUTH_MODE_T) pvSetBuffer >= AUTH_MODE_NUM) {
DBGLOG(REQ, TRACE, "Invalid auth mode %d\n", *(P_ENUM_PARAM_AUTH_MODE_T) pvSetBuffer);
return WLAN_STATUS_INVALID_DATA;
}
switch (*(P_ENUM_PARAM_AUTH_MODE_T) pvSetBuffer) {
case AUTH_MODE_WPA:
case AUTH_MODE_WPA_PSK:
case AUTH_MODE_WPA2:
case AUTH_MODE_WPA2_PSK:
/* infrastructure mode only */
if (prAdapter->rWifiVar.rConnSettings.eOPMode != NET_TYPE_INFRA)
return WLAN_STATUS_NOT_ACCEPTED;
break;
case AUTH_MODE_WPA_NONE:
/* ad hoc mode only */
if (prAdapter->rWifiVar.rConnSettings.eOPMode != NET_TYPE_IBSS)
return WLAN_STATUS_NOT_ACCEPTED;
break;
default:
break;
}
/* Save the new authentication mode. */
prAdapter->rWifiVar.rConnSettings.eAuthMode = *(P_ENUM_PARAM_AUTH_MODE_T) pvSetBuffer;
#if 1 /* DBG */
switch (prAdapter->rWifiVar.rConnSettings.eAuthMode) {
case AUTH_MODE_OPEN:
DBGLOG(RSN, TRACE, "New auth mode: open\n");
break;
case AUTH_MODE_SHARED:
DBGLOG(RSN, TRACE, "New auth mode: shared\n");
break;
case AUTH_MODE_AUTO_SWITCH:
DBGLOG(RSN, TRACE, "New auth mode: auto-switch\n");
break;
case AUTH_MODE_WPA:
DBGLOG(RSN, TRACE, "New auth mode: WPA\n");
break;
case AUTH_MODE_WPA_PSK:
DBGLOG(RSN, TRACE, "New auth mode: WPA PSK\n");
break;
case AUTH_MODE_WPA_NONE:
DBGLOG(RSN, TRACE, "New auth mode: WPA None\n");
break;
case AUTH_MODE_WPA2:
DBGLOG(RSN, TRACE, "New auth mode: WPA2\n");
break;
case AUTH_MODE_WPA2_PSK:
DBGLOG(RSN, TRACE, "New auth mode: WPA2 PSK\n");
break;
default:
DBGLOG(RSN, TRACE, "New auth mode: unknown (%d)\n", prAdapter->rWifiVar.rConnSettings.eAuthMode);
}
#endif
#if 0
if (prAdapter->rWifiVar.rConnSettings.eAuthMode >= AUTH_MODE_WPA) {
switch (prAdapter->rWifiVar.rConnSettings.eAuthMode) {
case AUTH_MODE_WPA:
u4AkmSuite = WPA_AKM_SUITE_802_1X;
break;
case AUTH_MODE_WPA_PSK:
u4AkmSuite = WPA_AKM_SUITE_PSK;
break;
case AUTH_MODE_WPA_NONE:
u4AkmSuite = WPA_AKM_SUITE_NONE;
break;
case AUTH_MODE_WPA2:
u4AkmSuite = RSN_AKM_SUITE_802_1X;
break;
case AUTH_MODE_WPA2_PSK:
u4AkmSuite = RSN_AKM_SUITE_PSK;
break;
default:
u4AkmSuite = 0;
}
} else {
u4AkmSuite = 0;
}
/* Enable the specific AKM suite only. */
for (i = 0; i < MAX_NUM_SUPPORTED_AKM_SUITES; i++) {
prEntry = &prAdapter->rMib.dot11RSNAConfigAuthenticationSuitesTable[i];
if (prEntry->dot11RSNAConfigAuthenticationSuite == u4AkmSuite)
prEntry->dot11RSNAConfigAuthenticationSuiteEnabled = TRUE;
else
prEntry->dot11RSNAConfigAuthenticationSuiteEnabled = FALSE;
#if CFG_SUPPORT_802_11W
if (kalGetMfpSetting(prAdapter->prGlueInfo) != RSN_AUTH_MFP_DISABLED) {
if ((u4AkmSuite == RSN_AKM_SUITE_PSK) &&
prEntry->dot11RSNAConfigAuthenticationSuite == RSN_AKM_SUITE_PSK_SHA256) {
DBGLOG(RSN, TRACE, "Enable RSN_AKM_SUITE_PSK_SHA256 AKM support\n");
prEntry->dot11RSNAConfigAuthenticationSuiteEnabled = TRUE;
}
if ((u4AkmSuite == RSN_AKM_SUITE_802_1X) &&
prEntry->dot11RSNAConfigAuthenticationSuite == RSN_AKM_SUITE_802_1X_SHA256) {
DBGLOG(RSN, TRACE, "Enable RSN_AKM_SUITE_802_1X_SHA256 AKM support\n");
prEntry->dot11RSNAConfigAuthenticationSuiteEnabled = TRUE;
}
}
#endif
}
#endif
return WLAN_STATUS_SUCCESS;
} /* wlanoidSetAuthMode */
#if 0
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to query the current 802.11 privacy filter
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[out] pvQueryBuffer A pointer to the buffer that holds the result of
* the query.
* \param[in] u4QueryBufferLen The length of the query buffer.
* \param[out] pu4QueryInfoLen If the call is successful, returns the number of
* bytes written into the query buffer. If the call
* failed due to invalid length of the query buffer,
* returns the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_BUFFER_TOO_SHORT
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidQueryPrivacyFilter(IN P_ADAPTER_T prAdapter,
OUT PVOID pvQueryBuffer, IN UINT_32 u4QueryBufferLen, OUT PUINT_32 pu4QueryInfoLen)
{
DEBUGFUNC("wlanoidQueryPrivacyFilter");
ASSERT(prAdapter);
ASSERT(pvQueryBuffer);
ASSERT(pu4QueryInfoLen);
*pu4QueryInfoLen = sizeof(ENUM_PARAM_PRIVACY_FILTER_T);
if (u4QueryBufferLen < sizeof(ENUM_PARAM_PRIVACY_FILTER_T))
return WLAN_STATUS_BUFFER_TOO_SHORT;
*(P_ENUM_PARAM_PRIVACY_FILTER_T) pvQueryBuffer = prAdapter->rWlanInfo.ePrivacyFilter;
#if DBG
switch (*(P_ENUM_PARAM_PRIVACY_FILTER_T) pvQueryBuffer) {
case PRIVACY_FILTER_ACCEPT_ALL:
DBGLOG(REQ, INFO, "Current privacy mode: open mode\n");
break;
case PRIVACY_FILTER_8021xWEP:
DBGLOG(REQ, INFO, "Current privacy mode: filtering mode\n");
break;
default:
DBGLOG(REQ, INFO, "Current auth mode: %d\n", *(P_ENUM_PARAM_AUTH_MODE_T) pvQueryBuffer);
}
#endif
return WLAN_STATUS_SUCCESS;
} /* wlanoidQueryPrivacyFilter */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to set the IEEE 802.11 privacy filter
* to the driver.
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[in] pvSetBuffer A pointer to the buffer that holds the data to be set.
* \param[in] u4SetBufferLen The length of the set buffer.
* \param[out] pu4SetInfoLen If the call is successful, returns the number of
* bytes read from the set buffer. If the call failed
* due to invalid length of the set buffer, returns
* the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_INVALID_DATA
* \retval WLAN_STATUS_INVALID_LENGTH
* \retval WLAN_STATUS_ADAPTER_NOT_READY
* \retval WLAN_STATUS_NOT_ACCEPTED
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidSetPrivacyFilter(IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
P_GLUE_INFO_T prGlueInfo;
DEBUGFUNC("wlanoidSetPrivacyFilter");
ASSERT(prAdapter);
ASSERT(pu4SetInfoLen);
ASSERT(pvSetBuffer);
prGlueInfo = prAdapter->prGlueInfo;
*pu4SetInfoLen = sizeof(ENUM_PARAM_PRIVACY_FILTER_T);
if (u4SetBufferLen < sizeof(ENUM_PARAM_PRIVACY_FILTER_T))
return WLAN_STATUS_INVALID_LENGTH;
if (prAdapter->rAcpiState == ACPI_STATE_D3) {
DBGLOG(REQ, WARN,
"Fail in set Authentication mode! (Adapter not ready). ACPI=D%d, Radio=%d\n",
prAdapter->rAcpiState, prAdapter->fgIsRadioOff);
return WLAN_STATUS_ADAPTER_NOT_READY;
}
/* Check if the new authentication mode is valid. */
if (*(P_ENUM_PARAM_PRIVACY_FILTER_T) pvSetBuffer >= PRIVACY_FILTER_NUM) {
DBGLOG(REQ, TRACE, "Invalid privacy filter %d\n", *(P_ENUM_PARAM_PRIVACY_FILTER_T) pvSetBuffer);
return WLAN_STATUS_INVALID_DATA;
}
switch (*(P_ENUM_PARAM_PRIVACY_FILTER_T) pvSetBuffer) {
default:
break;
}
/* Save the new authentication mode. */
prAdapter->rWlanInfo.ePrivacyFilter = *(ENUM_PARAM_PRIVACY_FILTER_T) pvSetBuffer;
return WLAN_STATUS_SUCCESS;
} /* wlanoidSetPrivacyFilter */
#endif
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to reload the available default settings for
* the specified type field.
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[in] pvSetBuffer A pointer to the buffer that holds the data to be set.
* \param[in] u4SetBufferLen The length of the set buffer.
* \param[out] pu4SetInfoLen If the call is successful, returns the number of
* bytes read from the set buffer. If the call failed
* due to invalid length of the set buffer, returns
* the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_ADAPTER_NOT_READY
* \retval WLAN_STATUS_INVALID_DATA
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidSetReloadDefaults(IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
WLAN_STATUS rStatus = WLAN_STATUS_SUCCESS;
ENUM_PARAM_NETWORK_TYPE_T eNetworkType;
UINT_32 u4Len;
UINT_8 ucCmdSeqNum;
DEBUGFUNC("wlanoidSetReloadDefaults");
ASSERT(prAdapter);
ASSERT(pu4SetInfoLen);
*pu4SetInfoLen = sizeof(PARAM_RELOAD_DEFAULTS);
/* if (IS_ARB_IN_RFTEST_STATE(prAdapter)) { */
/* return WLAN_STATUS_SUCCESS; */
/* } */
if (prAdapter->rAcpiState == ACPI_STATE_D3) {
DBGLOG(REQ, WARN,
"Fail in set Reload default! (Adapter not ready). ACPI=D%d, Radio=%d\n",
prAdapter->rAcpiState, prAdapter->fgIsRadioOff);
return WLAN_STATUS_ADAPTER_NOT_READY;
}
ASSERT(pvSetBuffer);
/* Verify the available reload options and reload the settings. */
switch (*(P_PARAM_RELOAD_DEFAULTS) pvSetBuffer) {
case ENUM_RELOAD_WEP_KEYS:
/* Reload available default WEP keys from the permanent
* storage.
*/
prAdapter->rWifiVar.rConnSettings.eAuthMode = AUTH_MODE_OPEN;
/* ENUM_ENCRYPTION_DISABLED; */
prAdapter->rWifiVar.rConnSettings.eEncStatus = ENUM_ENCRYPTION1_KEY_ABSENT;
{
P_GLUE_INFO_T prGlueInfo;
P_CMD_INFO_T prCmdInfo;
P_WIFI_CMD_T prWifiCmd;
P_CMD_802_11_KEY prCmdKey;
UINT_8 aucBCAddr[] = BC_MAC_ADDR;
prGlueInfo = prAdapter->prGlueInfo;
prCmdInfo = cmdBufAllocateCmdInfo(prAdapter, (CMD_HDR_SIZE + sizeof(CMD_802_11_KEY)));
if (!prCmdInfo) {
DBGLOG(INIT, ERROR, "Allocate CMD_INFO_T ==> FAILED.\n");
return WLAN_STATUS_FAILURE;
}
/* increase command sequence number */
ucCmdSeqNum = nicIncreaseCmdSeqNum(prAdapter);
/* compose CMD_802_11_KEY cmd pkt */
prCmdInfo->eCmdType = COMMAND_TYPE_NETWORK_IOCTL;
prCmdInfo->u2InfoBufLen = CMD_HDR_SIZE + sizeof(CMD_802_11_KEY);
prCmdInfo->pfCmdDoneHandler = nicCmdEventSetCommon;
prCmdInfo->pfCmdTimeoutHandler = nicOidCmdTimeoutCommon;
prCmdInfo->fgIsOid = TRUE;
prCmdInfo->ucCID = CMD_ID_ADD_REMOVE_KEY;
prCmdInfo->fgSetQuery = TRUE;
prCmdInfo->fgNeedResp = FALSE;
prCmdInfo->ucCmdSeqNum = ucCmdSeqNum;
prCmdInfo->u4SetInfoLen = sizeof(PARAM_REMOVE_KEY_T);
prCmdInfo->pvInformationBuffer = pvSetBuffer;
prCmdInfo->u4InformationBufferLength = u4SetBufferLen;
/* Setup WIFI_CMD_T */
prWifiCmd = (P_WIFI_CMD_T) (prCmdInfo->pucInfoBuffer);
prWifiCmd->u2TxByteCount = prCmdInfo->u2InfoBufLen;
prWifiCmd->u2PQ_ID = CMD_PQ_ID;
prWifiCmd->ucPktTypeID = CMD_PACKET_TYPE_ID;
prWifiCmd->ucCID = prCmdInfo->ucCID;
prWifiCmd->ucSetQuery = prCmdInfo->fgSetQuery;
prWifiCmd->ucSeqNum = prCmdInfo->ucCmdSeqNum;
prCmdKey = (P_CMD_802_11_KEY) (prWifiCmd->aucBuffer);
kalMemZero((PUINT_8) prCmdKey, sizeof(CMD_802_11_KEY));
prCmdKey->ucAddRemove = 0; /* Remove */
prCmdKey->ucKeyId = 0; /* (UINT_8)(prRemovedKey->u4KeyIndex & 0x000000ff); */
kalMemCopy(prCmdKey->aucPeerAddr, aucBCAddr, MAC_ADDR_LEN);
ASSERT(prCmdKey->ucKeyId < MAX_KEY_NUM);
prCmdKey->ucKeyType = 0;
/* insert into prCmdQueue */
kalEnqueueCommand(prGlueInfo, (P_QUE_ENTRY_T) prCmdInfo);
/* wakeup txServiceThread later */
GLUE_SET_EVENT(prGlueInfo);
return WLAN_STATUS_PENDING;
}
break;
default:
DBGLOG(REQ, TRACE, "Invalid reload option %d\n", *(P_PARAM_RELOAD_DEFAULTS) pvSetBuffer);
rStatus = WLAN_STATUS_INVALID_DATA;
}
/* OID_802_11_RELOAD_DEFAULTS requiest to reset to auto mode */
eNetworkType = PARAM_NETWORK_TYPE_AUTOMODE;
wlanoidSetNetworkTypeInUse(prAdapter, &eNetworkType, sizeof(eNetworkType), &u4Len);
return rStatus;
} /* wlanoidSetReloadDefaults */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to set a WEP key to the driver.
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[in] pvSetBuffer A pointer to the buffer that holds the data to be set.
* \param[in] u4SetBufferLen The length of the set buffer.
* \param[out] pu4SetInfoLen If the call is successful, returns the number of
* bytes read from the set buffer. If the call failed
* due to invalid length of the set buffer, returns
* the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_INVALID_LENGTH
* \retval WLAN_STATUS_INVALID_DATA
* \retval WLAN_STATUS_ADAPTER_NOT_READY
* \retval WLAN_STATUS_BUFFER_TOO_SHORT
*/
/*----------------------------------------------------------------------------*/
#ifdef LINUX
UINT_8 keyBuffer[sizeof(PARAM_KEY_T) + 16 /* LEGACY_KEY_MAX_LEN */];
UINT_8 aucBCAddr[] = BC_MAC_ADDR;
#endif
WLAN_STATUS
wlanoidSetAddWep(IN P_ADAPTER_T prAdapter, IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
#ifndef LINUX
UINT_8 keyBuffer[sizeof(PARAM_KEY_T) + 16 /* LEGACY_KEY_MAX_LEN */];
UINT_8 aucBCAddr[] = BC_MAC_ADDR;
#endif
P_PARAM_WEP_T prNewWepKey;
P_PARAM_KEY_T prParamKey = (P_PARAM_KEY_T) keyBuffer;
UINT_32 u4KeyId, u4SetLen;
DEBUGFUNC("wlanoidSetAddWep");
ASSERT(prAdapter);
*pu4SetInfoLen = OFFSET_OF(PARAM_WEP_T, aucKeyMaterial);
if (u4SetBufferLen < OFFSET_OF(PARAM_WEP_T, aucKeyMaterial)) {
ASSERT(pu4SetInfoLen);
return WLAN_STATUS_BUFFER_TOO_SHORT;
}
ASSERT(pvSetBuffer);
ASSERT(pu4SetInfoLen);
if (prAdapter->rAcpiState == ACPI_STATE_D3) {
DBGLOG(REQ, WARN, "Fail in set add WEP! (Adapter not ready). ACPI=D%d, Radio=%d\n",
prAdapter->rAcpiState, prAdapter->fgIsRadioOff);
return WLAN_STATUS_ADAPTER_NOT_READY;
}
prNewWepKey = (P_PARAM_WEP_T) pvSetBuffer;
/* Verify the total buffer for minimum length. */
if (u4SetBufferLen < OFFSET_OF(PARAM_WEP_T, aucKeyMaterial) + prNewWepKey->u4KeyLength) {
DBGLOG(REQ, WARN, "Invalid total buffer length (%d) than minimum length (%d)\n",
(UINT_8) u4SetBufferLen, (UINT_8) OFFSET_OF(PARAM_WEP_T, aucKeyMaterial));
*pu4SetInfoLen = OFFSET_OF(PARAM_WEP_T, aucKeyMaterial);
return WLAN_STATUS_INVALID_DATA;
}
/* Verify the key structure length. */
if (prNewWepKey->u4Length > u4SetBufferLen) {
DBGLOG(REQ, WARN,
"Invalid key structure length (%d) greater than total buffer length (%d)\n",
(UINT_8) prNewWepKey->u4Length, (UINT_8) u4SetBufferLen);
*pu4SetInfoLen = u4SetBufferLen;
return WLAN_STATUS_INVALID_DATA;
}
/* Verify the key material length for maximum key material length:16 */
if (prNewWepKey->u4KeyLength > 16 /* LEGACY_KEY_MAX_LEN */) {
DBGLOG(REQ, WARN,
"Invalid key material length (%d) greater than maximum key material length (16)\n",
(UINT_8) prNewWepKey->u4KeyLength);
*pu4SetInfoLen = u4SetBufferLen;
return WLAN_STATUS_INVALID_DATA;
}
*pu4SetInfoLen = u4SetBufferLen;
u4KeyId = prNewWepKey->u4KeyIndex & BITS(0, 29) /* WEP_KEY_ID_FIELD */;
/* Verify whether key index is valid or not, current version
* driver support only 4 global WEP keys setting by this OID
*/
if (u4KeyId > MAX_KEY_NUM - 1) {
DBGLOG(REQ, ERROR, "Error, invalid WEP key ID: %d\n", (UINT_8) u4KeyId);
return WLAN_STATUS_INVALID_DATA;
}
prParamKey->u4KeyIndex = u4KeyId;
/* Transmit key */
if (prNewWepKey->u4KeyIndex & IS_TRANSMIT_KEY)
prParamKey->u4KeyIndex |= IS_TRANSMIT_KEY;
/* Per client key */
if (prNewWepKey->u4KeyIndex & IS_UNICAST_KEY)
prParamKey->u4KeyIndex |= IS_UNICAST_KEY;
prParamKey->u4KeyLength = prNewWepKey->u4KeyLength;
kalMemCopy(prParamKey->arBSSID, aucBCAddr, MAC_ADDR_LEN);
kalMemCopy(prParamKey->aucKeyMaterial, prNewWepKey->aucKeyMaterial, prNewWepKey->u4KeyLength);
prParamKey->ucBssIdx = prAdapter->prAisBssInfo->ucBssIndex;
if (prParamKey->u4KeyLength == WEP_40_LEN)
prParamKey->ucCipher = CIPHER_SUITE_WEP40;
else if (prParamKey->u4KeyLength == WEP_104_LEN)
prParamKey->ucCipher = CIPHER_SUITE_WEP104;
else if (prParamKey->u4KeyLength == WEP_128_LEN)
prParamKey->ucCipher = CIPHER_SUITE_WEP128;
prParamKey->u4Length = OFFSET_OF(PARAM_KEY_T, aucKeyMaterial) + prNewWepKey->u4KeyLength;
wlanoidSetAddKey(prAdapter, (PVOID) prParamKey, prParamKey->u4Length, &u4SetLen);
return WLAN_STATUS_PENDING;
} /* wlanoidSetAddWep */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to request the driver to remove the WEP key
* at the specified key index.
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[in] pvSetBuffer A pointer to the buffer that holds the data to be set.
* \param[in] u4SetBufferLen The length of the set buffer.
* \param[out] pu4SetInfoLen If the call is successful, returns the number of
* bytes read from the set buffer. If the call failed
* due to invalid length of the set buffer, returns
* the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_INVALID_DATA
* \retval WLAN_STATUS_INVALID_LENGTH
* \retval WLAN_STATUS_ADAPTER_NOT_READY
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidSetRemoveWep(IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
UINT_32 u4KeyId, u4SetLen;
PARAM_REMOVE_KEY_T rRemoveKey;
UINT_8 aucBCAddr[] = BC_MAC_ADDR;
DEBUGFUNC("wlanoidSetRemoveWep");
ASSERT(prAdapter);
ASSERT(pu4SetInfoLen);
*pu4SetInfoLen = sizeof(PARAM_KEY_INDEX);
if (u4SetBufferLen < sizeof(PARAM_KEY_INDEX))
return WLAN_STATUS_INVALID_LENGTH;
ASSERT(pvSetBuffer);
u4KeyId = *(PUINT_32) pvSetBuffer;
/* Dump PARAM_WEP content. */
DBGLOG(REQ, INFO, "Set: Dump PARAM_KEY_INDEX content\n");
DBGLOG(REQ, INFO, "Index : 0x%08lx\n", u4KeyId);
if (prAdapter->rAcpiState == ACPI_STATE_D3) {
DBGLOG(REQ, WARN,
"Fail in set remove WEP! (Adapter not ready). ACPI=D%d, Radio=%d\n",
prAdapter->rAcpiState, prAdapter->fgIsRadioOff);
return WLAN_STATUS_ADAPTER_NOT_READY;
}
if (u4KeyId & IS_TRANSMIT_KEY) {
/* Bit 31 should not be set */
DBGLOG(REQ, ERROR, "Invalid WEP key index: 0x%08lx\n", u4KeyId);
return WLAN_STATUS_INVALID_DATA;
}
u4KeyId &= BITS(0, 7);
/* Verify whether key index is valid or not. Current version
* driver support only 4 global WEP keys.
*/
if (u4KeyId > MAX_KEY_NUM - 1) {
DBGLOG(REQ, ERROR, "invalid WEP key ID %lu\n", u4KeyId);
return WLAN_STATUS_INVALID_DATA;
}
rRemoveKey.u4Length = sizeof(PARAM_REMOVE_KEY_T);
rRemoveKey.u4KeyIndex = *(PUINT_32) pvSetBuffer;
kalMemCopy(rRemoveKey.arBSSID, aucBCAddr, MAC_ADDR_LEN);
wlanoidSetRemoveKey(prAdapter, (PVOID)&rRemoveKey, sizeof(PARAM_REMOVE_KEY_T), &u4SetLen);
return WLAN_STATUS_PENDING;
} /* wlanoidSetRemoveWep */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to set a key to the driver.
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[in] pvSetBuffer A pointer to the buffer that holds the data to be set.
* \param[in] u4SetBufferLen The length of the set buffer.
* \param[out] pu4SetInfoLen If the call is successful, returns the number of
* bytes read from the set buffer. If the call failed
* due to invalid length of the set buffer, returns
* the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_ADAPTER_NOT_READY
* \retval WLAN_STATUS_INVALID_LENGTH
* \retval WLAN_STATUS_INVALID_DATA
*
* \note The setting buffer PARAM_KEY_T, which is set by NDIS, is unpacked.
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidSetAddKey(IN P_ADAPTER_T prAdapter, IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
P_GLUE_INFO_T prGlueInfo;
P_CMD_INFO_T prCmdInfo;
P_WIFI_CMD_T prWifiCmd;
P_PARAM_KEY_T prNewKey;
P_CMD_802_11_KEY prCmdKey;
UINT_8 ucCmdSeqNum;
P_BSS_INFO_T prBssInfo;
P_AIS_SPECIFIC_BSS_INFO_T prAisSpecBssInfo;
P_STA_RECORD_T prStaRec = NULL;
BOOL fgNoHandshakeSec = FALSE;
#if CFG_SUPPORT_TDLS
P_STA_RECORD_T prTmpStaRec;
#endif
DEBUGFUNC("wlanoidSetAddKey");
DBGLOG(REQ, LOUD, "\n");
ASSERT(prAdapter);
ASSERT(pvSetBuffer);
ASSERT(pu4SetInfoLen);
DBGLOG(RSN, INFO, "wlanoidSetAddKey\n");
if (prAdapter->rAcpiState == ACPI_STATE_D3) {
DBGLOG(RSN, WARN, "Fail in set add key! (Adapter not ready). ACPI=D%d, Radio=%d\n",
prAdapter->rAcpiState, prAdapter->fgIsRadioOff);
return WLAN_STATUS_ADAPTER_NOT_READY;
}
prNewKey = (P_PARAM_KEY_T) pvSetBuffer;
/* Verify the key structure length. */
if (prNewKey->u4Length > u4SetBufferLen) {
DBGLOG(RSN, WARN,
"Invalid key structure length (%d) greater than total buffer length (%d)\n",
(UINT_8) prNewKey->u4Length, (UINT_8) u4SetBufferLen);
*pu4SetInfoLen = u4SetBufferLen;
return WLAN_STATUS_INVALID_LENGTH;
}
/* Verify the key material length for key material buffer */
if (prNewKey->u4KeyLength > prNewKey->u4Length - OFFSET_OF(PARAM_KEY_T, aucKeyMaterial)) {
DBGLOG(RSN, WARN, "Invalid key material length (%d)\n", (UINT_8) prNewKey->u4KeyLength);
*pu4SetInfoLen = u4SetBufferLen;
return WLAN_STATUS_INVALID_DATA;
}
/* Exception check */
if (prNewKey->u4KeyIndex & 0x0fffff00)
return WLAN_STATUS_INVALID_DATA;
/* Exception check, pairwise key must with transmit bit enabled */
if ((prNewKey->u4KeyIndex & BITS(30, 31)) == IS_UNICAST_KEY)
return WLAN_STATUS_INVALID_DATA;
if (!(prNewKey->u4KeyLength == WEP_40_LEN || prNewKey->u4KeyLength == WEP_104_LEN ||
prNewKey->u4KeyLength == CCMP_KEY_LEN || prNewKey->u4KeyLength == TKIP_KEY_LEN)) {
return WLAN_STATUS_INVALID_DATA;
}
/* Exception check, pairwise key must with transmit bit enabled */
if ((prNewKey->u4KeyIndex & BITS(30, 31)) == BITS(30, 31)) {
if (/* ((prNewKey->u4KeyIndex & 0xff) != 0) || */
((prNewKey->arBSSID[0] == 0xff) && (prNewKey->arBSSID[1] == 0xff)
&& (prNewKey->arBSSID[2] == 0xff) && (prNewKey->arBSSID[3] == 0xff)
&& (prNewKey->arBSSID[4] == 0xff) && (prNewKey->arBSSID[5] == 0xff))) {
return WLAN_STATUS_INVALID_DATA;
}
}
*pu4SetInfoLen = u4SetBufferLen;
/* Dump PARAM_KEY content. */
DBGLOG(RSN, INFO, "Set: Dump PARAM_KEY content\n");
DBGLOG(RSN, INFO, "Length : 0x%08lx\n", prNewKey->u4Length);
DBGLOG(RSN, INFO, "Key Index : 0x%08lx\n", prNewKey->u4KeyIndex);
DBGLOG(RSN, INFO, "Key Length: 0x%08lx\n", prNewKey->u4KeyLength);
DBGLOG(RSN, INFO, "BSSID:\n");
DBGLOG(RSN, INFO, MACSTR "\n", MAC2STR(prNewKey->arBSSID));
DBGLOG(RSN, INFO, "Cipher : %d\n", prNewKey->ucCipher);
DBGLOG(RSN, TRACE, "Key RSC:\n");
DBGLOG_MEM8(RSN, TRACE, &prNewKey->rKeyRSC, sizeof(PARAM_KEY_RSC));
DBGLOG(RSN, INFO, "Key Material:\n");
DBGLOG_MEM8(RSN, INFO, prNewKey->aucKeyMaterial, prNewKey->u4KeyLength);
prGlueInfo = prAdapter->prGlueInfo;
prAisSpecBssInfo = &prAdapter->rWifiVar.rAisSpecificBssInfo;
prBssInfo = GET_BSS_INFO_BY_INDEX(prAdapter, prNewKey->ucBssIdx);
if (!prBssInfo) {
DBGLOG(REQ, INFO, "BSS Info not exist !!\n");
return WLAN_STATUS_SUCCESS;
}
/* Tx Rx KeyType addr
* STA, GC:
* case1: 1 1 0 BC addr (no sta record of AP at this moment) WEP,
* notice: tx at default key setting WEP key now save to BSS_INFO
* case2: 0 1 0 BSSID (sta record of AP) RSN BC key
* case3: 1 1 1 AP addr (sta record of AP) RSN STA key
*
* GO:
* case1: 1 1 0 BSSID (no sta record) WEP -- Not support
* case2: 1 0 0 BSSID (no sta record) RSN BC key
* case3: 1 1 1 STA addr STA key
*/
if (prNewKey->ucCipher == CIPHER_SUITE_WEP40 ||
prNewKey->ucCipher == CIPHER_SUITE_WEP104 || prNewKey->ucCipher == CIPHER_SUITE_WEP128) {
/* check if the key no need handshake, then save to bss wep key for global usage */
fgNoHandshakeSec = TRUE;
}
if (fgNoHandshakeSec) {
#if DBG
if (IS_BSS_AIS(prBssInfo)) {
if (prAdapter->rWifiVar.rConnSettings.eAuthMode >= AUTH_MODE_WPA
&& prAdapter->rWifiVar.rConnSettings.eAuthMode != AUTH_MODE_WPA_NONE) {
DBGLOG(RSN, WARN, "Set wep at not open/shared setting\n");
return WLAN_STATUS_SUCCESS;
}
}
#endif
}
if ((prNewKey->u4KeyIndex & IS_UNICAST_KEY) == IS_UNICAST_KEY) {
prStaRec = cnmGetStaRecByAddress(prAdapter, prBssInfo->ucBssIndex, prNewKey->arBSSID);
if (!prStaRec) { /* Already disconnected ? */
DBGLOG(REQ, INFO, "[wlan] Not set the peer key while disconnect\n");
return WLAN_STATUS_SUCCESS;
}
}
prCmdInfo = cmdBufAllocateCmdInfo(prAdapter, (CMD_HDR_SIZE + sizeof(CMD_802_11_KEY)));
if (!prCmdInfo) {
DBGLOG(INIT, ERROR, "Allocate CMD_INFO_T ==> FAILED.\n");
return WLAN_STATUS_FAILURE;
}
/* increase command sequence number */
ucCmdSeqNum = nicIncreaseCmdSeqNum(prAdapter);
DBGLOG(REQ, INFO, "ucCmdSeqNum = %d\n", ucCmdSeqNum);
/* compose CMD_802_11_KEY cmd pkt */
prCmdInfo->eCmdType = COMMAND_TYPE_NETWORK_IOCTL;
prCmdInfo->u2InfoBufLen = CMD_HDR_SIZE + sizeof(CMD_802_11_KEY);
#if CFG_SUPPORT_REPLAY_DETECTION
prCmdInfo->pfCmdDoneHandler = nicCmdEventSetAddKey;
prCmdInfo->pfCmdTimeoutHandler = nicOidCmdTimeoutSetAddKey;
#else
prCmdInfo->pfCmdDoneHandler = nicCmdEventSetCommon;
prCmdInfo->pfCmdTimeoutHandler = nicOidCmdTimeoutCommon;
#endif
prCmdInfo->fgIsOid = TRUE;
prCmdInfo->ucCID = CMD_ID_ADD_REMOVE_KEY;
prCmdInfo->fgSetQuery = TRUE;
prCmdInfo->fgNeedResp = FALSE;
prCmdInfo->ucCmdSeqNum = ucCmdSeqNum;
prCmdInfo->u4SetInfoLen = u4SetBufferLen;
prCmdInfo->pvInformationBuffer = pvSetBuffer;
prCmdInfo->u4InformationBufferLength = u4SetBufferLen;
/* Setup WIFI_CMD_T */
prWifiCmd = (P_WIFI_CMD_T) (prCmdInfo->pucInfoBuffer);
prWifiCmd->u2TxByteCount = prCmdInfo->u2InfoBufLen;
prWifiCmd->u2PQ_ID = CMD_PQ_ID;
prWifiCmd->ucPktTypeID = CMD_PACKET_TYPE_ID;
prWifiCmd->ucCID = prCmdInfo->ucCID;
prWifiCmd->ucSetQuery = prCmdInfo->fgSetQuery;
prWifiCmd->ucSeqNum = prCmdInfo->ucCmdSeqNum;
prCmdKey = (P_CMD_802_11_KEY) (prWifiCmd->aucBuffer);
kalMemZero(prCmdKey, sizeof(CMD_802_11_KEY));
prCmdKey->ucAddRemove = 1; /* Add */
prCmdKey->ucTxKey = ((prNewKey->u4KeyIndex & IS_TRANSMIT_KEY) == IS_TRANSMIT_KEY) ? 1 : 0;
prCmdKey->ucKeyType = ((prNewKey->u4KeyIndex & IS_UNICAST_KEY) == IS_UNICAST_KEY) ? 1 : 0;
prCmdKey->ucIsAuthenticator = ((prNewKey->u4KeyIndex & IS_AUTHENTICATOR) == IS_AUTHENTICATOR) ? 1 : 0;
/* Copy the addr of the key */
if ((prNewKey->u4KeyIndex & IS_UNICAST_KEY) == IS_UNICAST_KEY) {
if (prStaRec) {
/* Overwrite the fgNoHandshakeSec in case */
fgNoHandshakeSec = FALSE; /* Legacy 802.1x wep case ? */
/* ASSERT(FALSE); */
}
} else {
if (!IS_BSS_ACTIVE(prBssInfo))
DBGLOG(REQ, INFO, "[wlan] BSS info (%d) not active yet!", prNewKey->ucBssIdx);
}
prCmdKey->ucBssIdx = prBssInfo->ucBssIndex;
prCmdKey->ucKeyId = (UINT_8) (prNewKey->u4KeyIndex & 0xff);
/* Note: the key length may not correct for WPA-None */
prCmdKey->ucKeyLen = (UINT_8) prNewKey->u4KeyLength;
kalMemCopy(prCmdKey->aucKeyMaterial, (PUINT_8) prNewKey->aucKeyMaterial, prCmdKey->ucKeyLen);
if (prNewKey->ucCipher) {
prCmdKey->ucAlgorithmId = prNewKey->ucCipher;
if (IS_BSS_AIS(prBssInfo)) {
#if CFG_SUPPORT_802_11W
if (prCmdKey->ucAlgorithmId == CIPHER_SUITE_BIP) {
if (prCmdKey->ucKeyId >= 4) {
P_AIS_SPECIFIC_BSS_INFO_T prAisSpecBssInfo;
prAisSpecBssInfo = &prAdapter->rWifiVar.rAisSpecificBssInfo;
prAisSpecBssInfo->fgBipKeyInstalled = TRUE;
}
}
#endif
if ((prCmdKey->ucAlgorithmId == CIPHER_SUITE_CCMP) && rsnCheckPmkidCandicate(prAdapter)) {
DBGLOG(RSN, TRACE, "Add key: Prepare a timer to indicate candidate PMKID Candidate\n");
cnmTimerStopTimer(prAdapter, &prAisSpecBssInfo->rPreauthenticationTimer);
cnmTimerStartTimer(prAdapter,
&prAisSpecBssInfo->rPreauthenticationTimer,
SEC_TO_MSEC(WAIT_TIME_IND_PMKID_CANDICATE_SEC));
}
if (prCmdKey->ucAlgorithmId == CIPHER_SUITE_TKIP) {
/* Todo:: Support AP mode defragment */
/* for pairwise key only */
if ((prNewKey->u4KeyIndex & BITS(30, 31)) == ((IS_UNICAST_KEY) | (IS_TRANSMIT_KEY))) {
kalMemCopy(prAdapter->rWifiVar.rAisSpecificBssInfo.aucRxMicKey,
&prCmdKey->aucKeyMaterial[16], MIC_KEY_LEN);
kalMemCopy(prAdapter->rWifiVar.rAisSpecificBssInfo.aucTxMicKey,
&prCmdKey->aucKeyMaterial[24], MIC_KEY_LEN);
}
}
} else {
#if CFG_SUPPORT_802_11W
/* AP PMF */
if ((prCmdKey->ucKeyId >= 4 && prCmdKey->ucKeyId <= 5) &&
(prCmdKey->ucAlgorithmId == CIPHER_SUITE_BIP)) {
DBGLOG(RSN, INFO, "AP mode set BIP\n");
prBssInfo->rApPmfCfg.fgBipKeyInstalled = TRUE;
}
#endif
}
} else { /* Legacy windows NDIS no cipher info */
#if 0
if (prNewKey->u4KeyLength == 5) {
prCmdKey->ucAlgorithmId = CIPHER_SUITE_WEP40;
} else if (prNewKey->u4KeyLength == 13) {
prCmdKey->ucAlgorithmId = CIPHER_SUITE_WEP104;
} else if (prNewKey->u4KeyLength == 16) {
if (prAdapter->rWifiVar.rConnSettings.eAuthMode < AUTH_MODE_WPA)
prCmdKey->ucAlgorithmId = CIPHER_SUITE_WEP128;
else {
if (IS_BSS_AIS(prBssInfo)) {
#if CFG_SUPPORT_802_11W
if (prCmdKey->ucKeyId >= 4) {
P_AIS_SPECIFIC_BSS_INFO_T prAisSpecBssInfo;
prCmdKey->ucAlgorithmId = CIPHER_SUITE_BIP;
prAisSpecBssInfo = &prAdapter->rWifiVar.rAisSpecificBssInfo;
prAisSpecBssInfo->fgBipKeyInstalled = TRUE;
} else
#endif
{
prCmdKey->ucAlgorithmId = CIPHER_SUITE_CCMP;
if (rsnCheckPmkidCandicate(prAdapter)) {
DBGLOG(RSN, TRACE,
("Add key: Prepare a timer to indicate candidate PMKID\n"));
cnmTimerStopTimer(prAdapter,
&prAisSpecBssInfo->rPreauthenticationTimer);
cnmTimerStartTimer(prAdapter,
&prAisSpecBssInfo->rPreauthenticationTimer,
SEC_TO_MSEC
(WAIT_TIME_IND_PMKID_CANDICATE_SEC));
}
}
}
}
} else if (prNewKey->u4KeyLength == 32) {
if (IS_BSS_AIS(prBssInfo)) {
if (prAdapter->rWifiVar.rConnSettings.eAuthMode == AUTH_MODE_WPA_NONE) {
if (prAdapter->rWifiVar.rConnSettings.eEncStatus == ENUM_ENCRYPTION2_ENABLED) {
prCmdKey->ucAlgorithmId = CIPHER_SUITE_TKIP;
} else if (prAdapter->rWifiVar.rConnSettings.eEncStatus ==
ENUM_ENCRYPTION3_ENABLED) {
prCmdKey->ucAlgorithmId = CIPHER_SUITE_CCMP;
prCmdKey->ucKeyLen = CCMP_KEY_LEN;
}
} else {
prCmdKey->ucAlgorithmId = CIPHER_SUITE_TKIP;
kalMemCopy(prAdapter->rWifiVar.rAisSpecificBssInfo.aucRxMicKey,
&prCmdKey->aucKeyMaterial[16], MIC_KEY_LEN);
kalMemCopy(prAdapter->rWifiVar.rAisSpecificBssInfo.aucTxMicKey,
&prCmdKey->aucKeyMaterial[24], MIC_KEY_LEN);
if (0 /* Todo::GCMP & GCMP-BIP ? */) {
if (rsnCheckPmkidCandicate(prAdapter)) {
DBGLOG(RSN, TRACE,
("Add key: Prepare a timer to indicate candidate PMKID\n"));
cnmTimerStopTimer(prAdapter,
&prAisSpecBssInfo->rPreauthenticationTimer);
cnmTimerStartTimer(prAdapter,
&prAisSpecBssInfo->rPreauthenticationTimer,
SEC_TO_MSEC
(WAIT_TIME_IND_PMKID_CANDICATE_SEC));
}
} else {
prCmdKey->ucAlgorithmId = CIPHER_SUITE_TKIP;
}
}
}
#endif
}
{
#if CFG_SUPPORT_TDLS
prTmpStaRec = cnmGetStaRecByAddress(prAdapter, prBssInfo->ucBssIndex, prNewKey->arBSSID);
if (prTmpStaRec) {
if (IS_DLS_STA(prTmpStaRec)) {
prStaRec = prTmpStaRec;
prCmdKey->ucAlgorithmId = CIPHER_SUITE_CCMP; /*128 ,TODO GCMP 256 */
kalMemCopy(prCmdKey->aucPeerAddr, prStaRec->aucMacAddr, MAC_ADDR_LEN);
}
}
#endif
#if CFG_SUPPORT_802_11W
/* AP PMF */
if (prCmdKey->ucAlgorithmId == CIPHER_SUITE_BIP) {
if (prCmdKey->ucIsAuthenticator) {
DBGLOG(RSN, INFO, "Authenticator BIP bssid:%d\n", prBssInfo->ucBssIndex);
prCmdKey->ucWlanIndex =
secPrivacySeekForBcEntry(prAdapter,
prBssInfo->ucBssIndex,
prBssInfo->aucOwnMacAddr,
STA_REC_INDEX_NOT_FOUND,
prCmdKey->ucAlgorithmId, prCmdKey->ucKeyId);
} else {
prCmdKey->ucWlanIndex =
secPrivacySeekForBcEntry(prAdapter,
prBssInfo->ucBssIndex,
prBssInfo->prStaRecOfAP->aucMacAddr,
prBssInfo->prStaRecOfAP->ucIndex,
prCmdKey->ucAlgorithmId, prCmdKey->ucKeyId);
}
DBGLOG(RSN, INFO, "BIP BC wtbl index:%d\n", prCmdKey->ucWlanIndex);
} else
#endif
if (1) {
if (prStaRec) {
if (prCmdKey->ucKeyType) { /* RSN STA */
P_WLAN_TABLE_T prWtbl;
prWtbl = prAdapter->rWifiVar.arWtbl;
prWtbl[prStaRec->ucWlanIndex].ucKeyId = prCmdKey->ucKeyId;
prCmdKey->ucWlanIndex = prStaRec->ucWlanIndex;
prStaRec->fgTransmitKeyExist = TRUE; /* wait for CMD Done ? */
kalMemCopy(prCmdKey->aucPeerAddr, prNewKey->arBSSID, MAC_ADDR_LEN);
#if CFG_SUPPORT_802_11W
/* AP PMF */
DBGLOG(RSN, INFO, "Assign client PMF flag = %d\n",
prStaRec->rPmfCfg.fgApplyPmf);
prCmdKey->ucMgmtProtection = prStaRec->rPmfCfg.fgApplyPmf;
#endif
} else {
ASSERT(FALSE);
}
} else { /* Overwrite the old one for AP and STA WEP */
if (prBssInfo->prStaRecOfAP) {
DBGLOG(RSN, INFO, "AP REC\n");
prCmdKey->ucWlanIndex =
secPrivacySeekForBcEntry(prAdapter,
prBssInfo->ucBssIndex,
prBssInfo->prStaRecOfAP->aucMacAddr,
prBssInfo->prStaRecOfAP->ucIndex,
prCmdKey->ucAlgorithmId, prCmdKey->ucKeyId);
kalMemCopy(prCmdKey->aucPeerAddr,
prBssInfo->prStaRecOfAP->aucMacAddr, MAC_ADDR_LEN);
} else {
DBGLOG(RSN, INFO, "!AP && !STA REC\n");
prCmdKey->ucWlanIndex =
secPrivacySeekForBcEntry(prAdapter,
prBssInfo->ucBssIndex,
prBssInfo->aucOwnMacAddr, /* Should replace by BSSID later */
STA_REC_INDEX_NOT_FOUND,
prCmdKey->ucAlgorithmId,
prCmdKey->ucKeyId);
kalMemCopy(prCmdKey->aucPeerAddr, prBssInfo->aucOwnMacAddr, MAC_ADDR_LEN);
}
/* overflow check */
if (prCmdKey->ucKeyId >= MAX_KEY_NUM) {
DBGLOG(RSN, ERROR, "invalid keyId: %d\n", prCmdKey->ucKeyId);
prCmdKey->ucKeyId &= 0x3;
}
if (fgNoHandshakeSec) { /* WEP: STA and AP */
prBssInfo->wepkeyWlanIdx = prCmdKey->ucWlanIndex;
prBssInfo->wepkeyUsed[prCmdKey->ucKeyId] = TRUE;
} else if (!prBssInfo->prStaRecOfAP) { /* AP WPA/RSN */
prBssInfo->ucBMCWlanIndexS[prCmdKey->ucKeyId] = prCmdKey->ucWlanIndex;
prBssInfo->ucBMCWlanIndexSUsed[prCmdKey->ucKeyId] = TRUE;
} else { /* STA WPA/RSN, should not have tx but no sta record */
prBssInfo->ucBMCWlanIndexS[prCmdKey->ucKeyId] = prCmdKey->ucWlanIndex;
prBssInfo->ucBMCWlanIndexSUsed[prCmdKey->ucKeyId] = TRUE;
DBGLOG(RSN, INFO, "BMCWlanIndex kid = %d, index = %d\n", prCmdKey->ucKeyId,
prCmdKey->ucWlanIndex);
}
if (prCmdKey->ucTxKey) { /* */
prBssInfo->fgBcDefaultKeyExist = TRUE;
prBssInfo->ucBcDefaultKeyIdx = prCmdKey->ucKeyId;
}
}
}
}
#if DBG
DBGLOG(RSN, INFO, "Add key cmd to wlan index %d:", prCmdKey->ucWlanIndex);
DBGLOG(RSN, INFO, "(BSS = %d) " MACSTR "\n", prCmdKey->ucBssIdx, MAC2STR(prCmdKey->aucPeerAddr));
DBGLOG(RSN, INFO, "Tx = %d type = %d Auth = %d\n", prCmdKey->ucTxKey, prCmdKey->ucKeyType,
prCmdKey->ucIsAuthenticator);
DBGLOG(RSN, INFO, "cipher = %d keyid = %d keylen = %d\n", prCmdKey->ucAlgorithmId, prCmdKey->ucKeyId,
prCmdKey->ucKeyLen);
DBGLOG_MEM8(RSN, INFO, prCmdKey->aucKeyMaterial, prCmdKey->ucKeyLen);
DBGLOG(RSN, INFO, "wepkeyUsed = %d\n", prBssInfo->wepkeyUsed[prCmdKey->ucKeyId]);
DBGLOG(RSN, INFO, "wepkeyWlanIdx = %d:", prBssInfo->wepkeyWlanIdx);
DBGLOG(RSN, INFO, "ucBMCWlanIndexSUsed = %d\n", prBssInfo->ucBMCWlanIndexSUsed[prCmdKey->ucKeyId]);
DBGLOG(RSN, INFO, "ucBMCWlanIndexS = %d:", prBssInfo->ucBMCWlanIndexS[prCmdKey->ucKeyId]);
#endif
/* insert into prCmdQueue */
kalEnqueueCommand(prGlueInfo, (P_QUE_ENTRY_T) prCmdInfo);
/* wakeup txServiceThread later */
GLUE_SET_EVENT(prGlueInfo);
return WLAN_STATUS_PENDING;
} /* wlanoidSetAddKey */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to request the driver to remove the key at
* the specified key index.
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[in] pvSetBuffer A pointer to the buffer that holds the data to be set.
* \param[in] u4SetBufferLen The length of the set buffer.
* \param[out] pu4SetInfoLen If the call is successful, returns the number of
* bytes read from the set buffer. If the call failed
* due to invalid length of the set buffer, returns
* the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_INVALID_DATA
* \retval WLAN_STATUS_INVALID_LENGTH
* \retval WLAN_STATUS_ADAPTER_NOT_READY
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidSetRemoveKey(IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
P_GLUE_INFO_T prGlueInfo;
P_CMD_INFO_T prCmdInfo;
P_WIFI_CMD_T prWifiCmd;
P_PARAM_REMOVE_KEY_T prRemovedKey;
P_CMD_802_11_KEY prCmdKey;
UINT_8 ucCmdSeqNum;
P_WLAN_TABLE_T prWlanTable;
P_STA_RECORD_T prStaRec = NULL;
P_BSS_INFO_T prBssInfo;
/* UINT_8 i = 0; */
BOOL fgRemoveWepKey = FALSE;
UINT_32 ucRemoveBCKeyAtIdx = WTBL_RESERVED_ENTRY;
UINT_32 u4KeyIndex;
DEBUGFUNC("wlanoidSetRemoveKey");
ASSERT(prAdapter);
ASSERT(pu4SetInfoLen);
DBGLOG(RSN, INFO, "wlanoidSetRemoveKey\n");
*pu4SetInfoLen = sizeof(PARAM_REMOVE_KEY_T);
if (u4SetBufferLen < sizeof(PARAM_REMOVE_KEY_T))
return WLAN_STATUS_INVALID_LENGTH;
if (prAdapter->rAcpiState == ACPI_STATE_D3) {
DBGLOG(REQ, WARN,
"Fail in set remove key! (Adapter not ready). ACPI=D%d, Radio=%d\n",
prAdapter->rAcpiState, prAdapter->fgIsRadioOff);
return WLAN_STATUS_ADAPTER_NOT_READY;
}
ASSERT(pvSetBuffer);
prRemovedKey = (P_PARAM_REMOVE_KEY_T) pvSetBuffer;
/* Dump PARAM_REMOVE_KEY content. */
DBGLOG(RSN, INFO, "Set: Dump PARAM_REMOVE_KEY content\n");
DBGLOG(RSN, INFO, "Length : 0x%08lx\n", prRemovedKey->u4Length);
DBGLOG(RSN, INFO, "Key Index : 0x%08lx\n", prRemovedKey->u4KeyIndex);
DBGLOG(RSN, INFO, "BSS_INDEX : %d\n", prRemovedKey->ucBssIdx);
DBGLOG(RSN, INFO, "BSSID:\n");
DBGLOG_MEM8(RSN, INFO, prRemovedKey->arBSSID, MAC_ADDR_LEN);
prGlueInfo = prAdapter->prGlueInfo;
prBssInfo = GET_BSS_INFO_BY_INDEX(prAdapter, prRemovedKey->ucBssIdx);
ASSERT(prBssInfo);
u4KeyIndex = prRemovedKey->u4KeyIndex & 0x000000FF;
#if CFG_SUPPORT_802_11W
ASSERT(u4KeyIndex < MAX_KEY_NUM + 2);
#else
/* ASSERT(prCmdKey->ucKeyId < MAX_KEY_NUM); */
#endif
if (u4KeyIndex >= 4) {
DBGLOG(RSN, INFO, "Remove bip key Index : 0x%08lx\n", u4KeyIndex);
return WLAN_STATUS_SUCCESS;
}
/* Clean up the Tx key flag */
if (prRemovedKey->u4KeyIndex & IS_UNICAST_KEY) {
prStaRec = cnmGetStaRecByAddress(prAdapter, prRemovedKey->ucBssIdx, prRemovedKey->arBSSID);
if (!prStaRec)
return WLAN_STATUS_SUCCESS;
} else {
if (u4KeyIndex == prBssInfo->ucBcDefaultKeyIdx)
prBssInfo->fgBcDefaultKeyExist = FALSE;
}
if (!prStaRec) {
if (prBssInfo->wepkeyUsed[u4KeyIndex] == TRUE)
fgRemoveWepKey = TRUE;
if (fgRemoveWepKey) {
DBGLOG(RSN, INFO, "Remove wep key id = %d", u4KeyIndex);
prBssInfo->wepkeyUsed[u4KeyIndex] = FALSE;
if (prBssInfo->fgBcDefaultKeyExist &&
prBssInfo->ucBcDefaultKeyIdx == u4KeyIndex) {
prBssInfo->fgBcDefaultKeyExist = FALSE;
prBssInfo->ucBcDefaultKeyIdx = 0xff;
}
ASSERT(prBssInfo->wepkeyWlanIdx < WTBL_SIZE);
ucRemoveBCKeyAtIdx = prBssInfo->wepkeyWlanIdx;
} else {
DBGLOG(RSN, INFO, "Remove group key id = %d", u4KeyIndex);
if (prBssInfo->ucBMCWlanIndexSUsed[u4KeyIndex]) {
if (prBssInfo->fgBcDefaultKeyExist &&
prBssInfo->ucBcDefaultKeyIdx == u4KeyIndex) {
prBssInfo->fgBcDefaultKeyExist = FALSE;
prBssInfo->ucBcDefaultKeyIdx = 0xff;
}
if (u4KeyIndex != 0)
ASSERT(prBssInfo->ucBMCWlanIndexS[u4KeyIndex] < WTBL_SIZE);
ucRemoveBCKeyAtIdx = prBssInfo->ucBMCWlanIndexS[u4KeyIndex];
prBssInfo->ucBMCWlanIndexSUsed[u4KeyIndex]
= FALSE;
prBssInfo->ucBMCWlanIndexS[u4KeyIndex]
= WTBL_RESERVED_ENTRY;
}
}
DBGLOG(RSN, INFO, "ucRemoveBCKeyAtIdx = %d", ucRemoveBCKeyAtIdx);
if (ucRemoveBCKeyAtIdx >= WTBL_SIZE)
return WLAN_STATUS_SUCCESS;
}
prCmdInfo = cmdBufAllocateCmdInfo(prAdapter, (CMD_HDR_SIZE + sizeof(CMD_802_11_KEY)));
if (!prCmdInfo) {
DBGLOG(INIT, ERROR, "Allocate CMD_INFO_T ==> FAILED.\n");
return WLAN_STATUS_FAILURE;
}
prWlanTable = prAdapter->rWifiVar.arWtbl;
prBssInfo = GET_BSS_INFO_BY_INDEX(prAdapter, prRemovedKey->ucBssIdx);
/* increase command sequence number */
ucCmdSeqNum = nicIncreaseCmdSeqNum(prAdapter);
/* compose CMD_802_11_KEY cmd pkt */
prCmdInfo->eCmdType = COMMAND_TYPE_NETWORK_IOCTL;
/* prCmdInfo->ucBssIndex = prRemovedKey->ucBssIdx; */
prCmdInfo->u2InfoBufLen = CMD_HDR_SIZE + sizeof(CMD_802_11_KEY);
prCmdInfo->pfCmdDoneHandler = nicCmdEventSetCommon;
prCmdInfo->pfCmdTimeoutHandler = nicOidCmdTimeoutCommon;
prCmdInfo->fgIsOid = TRUE;
prCmdInfo->ucCID = CMD_ID_ADD_REMOVE_KEY;
prCmdInfo->fgSetQuery = TRUE;
prCmdInfo->fgNeedResp = FALSE;
/* prCmdInfo->fgDriverDomainMCR = FALSE; */
prCmdInfo->ucCmdSeqNum = ucCmdSeqNum;
prCmdInfo->u4SetInfoLen = sizeof(PARAM_REMOVE_KEY_T);
prCmdInfo->pvInformationBuffer = pvSetBuffer;
prCmdInfo->u4InformationBufferLength = u4SetBufferLen;
/* Setup WIFI_CMD_T */
prWifiCmd = (P_WIFI_CMD_T) (prCmdInfo->pucInfoBuffer);
prWifiCmd->u2TxByteCount = prCmdInfo->u2InfoBufLen;
prWifiCmd->u2PQ_ID = CMD_PQ_ID;
prWifiCmd->ucPktTypeID = CMD_PACKET_TYPE_ID;
prWifiCmd->ucCID = prCmdInfo->ucCID;
prWifiCmd->ucSetQuery = prCmdInfo->fgSetQuery;
prWifiCmd->ucSeqNum = prCmdInfo->ucCmdSeqNum;
prCmdKey = (P_CMD_802_11_KEY) (prWifiCmd->aucBuffer);
kalMemZero((PUINT_8) prCmdKey, sizeof(CMD_802_11_KEY));
prCmdKey->ucAddRemove = 0; /* Remove */
prCmdKey->ucKeyId = (UINT_8) u4KeyIndex;
kalMemCopy(prCmdKey->aucPeerAddr, (PUINT_8) prRemovedKey->arBSSID, MAC_ADDR_LEN);
prCmdKey->ucBssIdx = prRemovedKey->ucBssIdx;
if (prStaRec) {
prCmdKey->ucKeyType = 1;
prCmdKey->ucWlanIndex = prStaRec->ucWlanIndex;
prStaRec->fgTransmitKeyExist = FALSE;
} else if (ucRemoveBCKeyAtIdx < WTBL_SIZE) {
prCmdKey->ucWlanIndex = ucRemoveBCKeyAtIdx;
} else {
ASSERT(FALSE);
}
/* insert into prCmdQueue */
kalEnqueueCommand(prGlueInfo, (P_QUE_ENTRY_T) prCmdInfo);
/* wakeup txServiceThread later */
GLUE_SET_EVENT(prGlueInfo);
return WLAN_STATUS_PENDING;
} /* wlanoidSetRemoveKey */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to set the default key
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[in] pvSetBuffer A pointer to the buffer that holds the data to be set.
* \param[in] u4SetBufferLen The length of the set buffer.
* \param[out] pu4SetInfoLen If the call is successful, returns the number of
* bytes read from the set buffer. If the call failed
* due to invalid length of the set buffer, returns
* the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_ADAPTER_NOT_READY
* \retval WLAN_STATUS_INVALID_LENGTH
* \retval WLAN_STATUS_INVALID_DATA
*
* \note The setting buffer PARAM_KEY_T, which is set by NDIS, is unpacked.
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidSetDefaultKey(IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
P_GLUE_INFO_T prGlueInfo;
P_CMD_INFO_T prCmdInfo;
P_WIFI_CMD_T prWifiCmd;
P_PARAM_DEFAULT_KEY_T prDefaultKey;
P_CMD_DEFAULT_KEY prCmdDefaultKey;
UINT_8 ucCmdSeqNum;
P_BSS_INFO_T prBssInfo;
BOOL fgSetWepKey = FALSE;
UINT_8 ucWlanIndex = WTBL_RESERVED_ENTRY;
DEBUGFUNC("wlanoidSetDefaultKey");
DBGLOG(REQ, LOUD, "\n");
ASSERT(prAdapter);
ASSERT(pvSetBuffer);
ASSERT(pu4SetInfoLen);
if (prAdapter->rAcpiState == ACPI_STATE_D3) {
DBGLOG(REQ, WARN, "Fail in set add key! (Adapter not ready). ACPI=D%d, Radio=%d\n",
prAdapter->rAcpiState, prAdapter->fgIsRadioOff);
return WLAN_STATUS_ADAPTER_NOT_READY;
}
prDefaultKey = (P_PARAM_DEFAULT_KEY_T) pvSetBuffer;
*pu4SetInfoLen = u4SetBufferLen;
/* Dump PARAM_DEFAULT_KEY_T content. */
DBGLOG(RSN, INFO, "Key Index : %d\n", prDefaultKey->ucKeyID);
DBGLOG(RSN, INFO, "Unicast Key : %d\n", prDefaultKey->ucUnicast);
DBGLOG(RSN, INFO, "Multicast Key : %d\n", prDefaultKey->ucMulticast);
/* prWlanTable = prAdapter->rWifiVar.arWtbl; */
prGlueInfo = prAdapter->prGlueInfo;
prBssInfo = GET_BSS_INFO_BY_INDEX(prAdapter, prDefaultKey->ucBssIdx);
DBGLOG(RSN, INFO, "WlanIdx = %d\n", prBssInfo->wepkeyWlanIdx);
if (prDefaultKey->ucMulticast) {
if (!prBssInfo)
ASSERT(FALSE);
if (prBssInfo->prStaRecOfAP) { /* Actually GC not have wep */
if (prBssInfo->wepkeyUsed[prDefaultKey->ucKeyID]) {
prBssInfo->ucBcDefaultKeyIdx = prDefaultKey->ucKeyID;
prBssInfo->fgBcDefaultKeyExist = TRUE;
ucWlanIndex = prBssInfo->wepkeyWlanIdx;
} else {
DBGLOG(RSN, ERROR, "WPA encryption should retrun");
return WLAN_STATUS_SUCCESS;
}
} else { /* For AP mode only */
if (prBssInfo->wepkeyUsed[prDefaultKey->ucKeyID] == TRUE)
fgSetWepKey = TRUE;
if (fgSetWepKey) {
ucWlanIndex = prBssInfo->wepkeyWlanIdx;
} else {
if (!prBssInfo->ucBMCWlanIndexSUsed[prDefaultKey->ucKeyID]) {
DBGLOG(RSN, ERROR, "Set AP wep default but key not exist!");
return WLAN_STATUS_SUCCESS;
}
ucWlanIndex = prBssInfo->ucBMCWlanIndexS[prDefaultKey->ucKeyID];
}
prBssInfo->ucBcDefaultKeyIdx = prDefaultKey->ucKeyID;
prBssInfo->fgBcDefaultKeyExist = TRUE;
}
if (ucWlanIndex > WTBL_SIZE)
ASSERT(FALSE);
} else {
DBGLOG(RSN, ERROR, "Check the case set unicast default key!");
ASSERT(FALSE);
}
prCmdInfo = cmdBufAllocateCmdInfo(prAdapter, (CMD_HDR_SIZE + sizeof(CMD_DEFAULT_KEY)));
if (!prCmdInfo) {
DBGLOG(INIT, ERROR, "Allocate CMD_INFO_T ==> FAILED.\n");
return WLAN_STATUS_FAILURE;
}
/* increase command sequence number */
ucCmdSeqNum = nicIncreaseCmdSeqNum(prAdapter);
DBGLOG(REQ, INFO, "ucCmdSeqNum = %d\n", ucCmdSeqNum);
/* compose CMD_802_11_KEY cmd pkt */
prCmdInfo->eCmdType = COMMAND_TYPE_NETWORK_IOCTL;
prCmdInfo->u2InfoBufLen = CMD_HDR_SIZE + sizeof(CMD_DEFAULT_KEY);
prCmdInfo->pfCmdDoneHandler = nicCmdEventSetCommon;
prCmdInfo->pfCmdTimeoutHandler = nicOidCmdTimeoutCommon;
prCmdInfo->fgIsOid = TRUE;
prCmdInfo->ucCID = CMD_ID_DEFAULT_KEY_ID;
prCmdInfo->fgSetQuery = TRUE;
prCmdInfo->fgNeedResp = FALSE;
prCmdInfo->ucCmdSeqNum = ucCmdSeqNum;
prCmdInfo->u4SetInfoLen = u4SetBufferLen;
prCmdInfo->pvInformationBuffer = pvSetBuffer;
prCmdInfo->u4InformationBufferLength = u4SetBufferLen;
/* Setup WIFI_CMD_T */
prWifiCmd = (P_WIFI_CMD_T) (prCmdInfo->pucInfoBuffer);
prWifiCmd->u2TxByteCount = prCmdInfo->u2InfoBufLen;
prWifiCmd->u2PQ_ID = CMD_PQ_ID;
prWifiCmd->ucPktTypeID = CMD_PACKET_TYPE_ID;
prWifiCmd->ucCID = prCmdInfo->ucCID;
prWifiCmd->ucSetQuery = prCmdInfo->fgSetQuery;
prWifiCmd->ucSeqNum = prCmdInfo->ucCmdSeqNum;
prCmdDefaultKey = (P_CMD_DEFAULT_KEY) (prWifiCmd->aucBuffer);
kalMemZero(prCmdDefaultKey, sizeof(CMD_DEFAULT_KEY));
prCmdDefaultKey->ucBssIdx = prDefaultKey->ucBssIdx;
prCmdDefaultKey->ucKeyId = prDefaultKey->ucKeyID;
prCmdDefaultKey->ucWlanIndex = ucWlanIndex;
prCmdDefaultKey->ucMulticast = prDefaultKey->ucMulticast;
DBGLOG(RSN, INFO, "CMD_ID_DEFAULT_KEY_ID (%d) with wlan idx = %d\n", prDefaultKey->ucKeyID, ucWlanIndex);
/* insert into prCmdQueue */
kalEnqueueCommand(prGlueInfo, (P_QUE_ENTRY_T) prCmdInfo);
/* wakeup txServiceThread later */
GLUE_SET_EVENT(prGlueInfo);
return WLAN_STATUS_PENDING;
} /* wlanoidSetDefaultKey */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to query the current encryption status.
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[out] pvQueryBuffer A pointer to the buffer that holds the result of
* the query.
* \param[in] u4QueryBufferLen The length of the query buffer.
* \param[out] pu4QueryInfoLen If the call is successful, returns the number of
* bytes written into the query buffer. If the call
* failed due to invalid length of the query buffer,
* returns the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidQueryEncryptionStatus(IN P_ADAPTER_T prAdapter,
IN PVOID pvQueryBuffer, IN UINT_32 u4QueryBufferLen, OUT PUINT_32 pu4QueryInfoLen)
{
BOOLEAN fgTransmitKeyAvailable = TRUE;
ENUM_PARAM_ENCRYPTION_STATUS_T eEncStatus = 0;
DEBUGFUNC("wlanoidQueryEncryptionStatus");
ASSERT(prAdapter);
ASSERT(pu4QueryInfoLen);
if (u4QueryBufferLen)
ASSERT(pvQueryBuffer);
*pu4QueryInfoLen = sizeof(ENUM_PARAM_ENCRYPTION_STATUS_T);
fgTransmitKeyAvailable = prAdapter->prAisBssInfo->fgBcDefaultKeyExist;
switch (prAdapter->rWifiVar.rConnSettings.eEncStatus) {
case ENUM_ENCRYPTION3_ENABLED:
if (fgTransmitKeyAvailable)
eEncStatus = ENUM_ENCRYPTION3_ENABLED;
else
eEncStatus = ENUM_ENCRYPTION3_KEY_ABSENT;
break;
case ENUM_ENCRYPTION2_ENABLED:
if (fgTransmitKeyAvailable) {
eEncStatus = ENUM_ENCRYPTION2_ENABLED;
break;
}
eEncStatus = ENUM_ENCRYPTION2_KEY_ABSENT;
break;
case ENUM_ENCRYPTION1_ENABLED:
if (fgTransmitKeyAvailable)
eEncStatus = ENUM_ENCRYPTION1_ENABLED;
else
eEncStatus = ENUM_ENCRYPTION1_KEY_ABSENT;
break;
case ENUM_ENCRYPTION_DISABLED:
eEncStatus = ENUM_ENCRYPTION_DISABLED;
break;
default:
DBGLOG(REQ, ERROR, "Unknown Encryption Status Setting:%d\n",
prAdapter->rWifiVar.rConnSettings.eEncStatus);
}
#if DBG
DBGLOG(REQ, INFO,
"Encryption status: %d Return:%d\n", prAdapter->rWifiVar.rConnSettings.eEncStatus, eEncStatus);
#endif
*(P_ENUM_PARAM_ENCRYPTION_STATUS_T) pvQueryBuffer = eEncStatus;
return WLAN_STATUS_SUCCESS;
} /* wlanoidQueryEncryptionStatus */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to set the encryption status to the driver.
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[in] pvSetBuffer A pointer to the buffer that holds the data to be set.
* \param[in] u4SetBufferLen The length of the set buffer.
* \param[out] pu4SetInfoLen If the call is successful, returns the number of
* bytes read from the set buffer. If the call failed
* due to invalid length of the set buffer, returns
* the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_ADAPTER_NOT_READY
* \retval WLAN_STATUS_NOT_SUPPORTED
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidSetEncryptionStatus(IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
P_GLUE_INFO_T prGlueInfo;
WLAN_STATUS rStatus = WLAN_STATUS_SUCCESS;
ENUM_PARAM_ENCRYPTION_STATUS_T eEewEncrypt;
DEBUGFUNC("wlanoidSetEncryptionStatus");
ASSERT(prAdapter);
ASSERT(pvSetBuffer);
ASSERT(pu4SetInfoLen);
prGlueInfo = prAdapter->prGlueInfo;
*pu4SetInfoLen = sizeof(ENUM_PARAM_ENCRYPTION_STATUS_T);
/* if (IS_ARB_IN_RFTEST_STATE(prAdapter)) { */
/* return WLAN_STATUS_SUCCESS; */
/* } */
if (prAdapter->rAcpiState == ACPI_STATE_D3) {
DBGLOG(REQ, WARN,
"Fail in set encryption status! (Adapter not ready). ACPI=D%d, Radio=%d\n",
prAdapter->rAcpiState, prAdapter->fgIsRadioOff);
return WLAN_STATUS_ADAPTER_NOT_READY;
}
eEewEncrypt = *(P_ENUM_PARAM_ENCRYPTION_STATUS_T) pvSetBuffer;
DBGLOG(REQ, INFO, "ENCRYPTION_STATUS %d\n", eEewEncrypt);
switch (eEewEncrypt) {
case ENUM_ENCRYPTION_DISABLED: /* Disable WEP, TKIP, AES */
DBGLOG(RSN, INFO, "Disable Encryption\n");
secSetCipherSuite(prAdapter, CIPHER_FLAG_WEP40 | CIPHER_FLAG_WEP104 | CIPHER_FLAG_WEP128);
break;
case ENUM_ENCRYPTION1_ENABLED: /* Enable WEP. Disable TKIP, AES */
DBGLOG(RSN, INFO, "Enable Encryption1\n");
secSetCipherSuite(prAdapter, CIPHER_FLAG_WEP40 | CIPHER_FLAG_WEP104 | CIPHER_FLAG_WEP128);
break;
case ENUM_ENCRYPTION2_ENABLED: /* Enable WEP, TKIP. Disable AES */
secSetCipherSuite(prAdapter,
CIPHER_FLAG_WEP40 | CIPHER_FLAG_WEP104 | CIPHER_FLAG_WEP128 | CIPHER_FLAG_TKIP);
DBGLOG(RSN, INFO, "Enable Encryption2\n");
break;
case ENUM_ENCRYPTION3_ENABLED: /* Enable WEP, TKIP, AES */
secSetCipherSuite(prAdapter,
CIPHER_FLAG_WEP40 |
CIPHER_FLAG_WEP104 | CIPHER_FLAG_WEP128 | CIPHER_FLAG_TKIP | CIPHER_FLAG_CCMP);
DBGLOG(RSN, INFO, "Enable Encryption3\n");
break;
default:
DBGLOG(RSN, INFO, "Unacceptible encryption status: %d\n",
*(P_ENUM_PARAM_ENCRYPTION_STATUS_T) pvSetBuffer);
rStatus = WLAN_STATUS_NOT_SUPPORTED;
}
if (rStatus == WLAN_STATUS_SUCCESS) {
/* Save the new encryption status. */
prAdapter->rWifiVar.rConnSettings.eEncStatus = *(P_ENUM_PARAM_ENCRYPTION_STATUS_T) pvSetBuffer;
}
return rStatus;
} /* wlanoidSetEncryptionStatus */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to test the driver.
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[in] pvSetBuffer A pointer to the buffer that holds the data to be set.
* \param[in] u4SetBufferLen The length of the set buffer.
* \param[out] pu4SetInfoLen If the call is successful, returns the number of
* bytes read from the set buffer. If the call failed
* due to invalid length of the set buffer, returns
* the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_INVALID_LENGTH
* \retval WLAN_STATUS_INVALID_DATA
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidSetTest(IN P_ADAPTER_T prAdapter, IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
P_PARAM_802_11_TEST_T prTest;
PVOID pvTestData;
PVOID pvStatusBuffer;
UINT_32 u4StatusBufferSize;
DEBUGFUNC("wlanoidSetTest");
ASSERT(prAdapter);
ASSERT(pu4SetInfoLen);
ASSERT(pvSetBuffer);
*pu4SetInfoLen = u4SetBufferLen;
prTest = (P_PARAM_802_11_TEST_T) pvSetBuffer;
DBGLOG(REQ, TRACE, "Test - Type %ld\n", prTest->u4Type);
switch (prTest->u4Type) {
case 1: /* Type 1: generate an authentication event */
pvTestData = (PVOID) &prTest->u.AuthenticationEvent;
pvStatusBuffer = (PVOID) prAdapter->aucIndicationEventBuffer;
u4StatusBufferSize = prTest->u4Length - 8;
if (u4StatusBufferSize > sizeof(prTest->u.AuthenticationEvent))
return WLAN_STATUS_INVALID_LENGTH;
break;
case 2: /* Type 2: generate an RSSI status indication */
pvTestData = (PVOID) &prTest->u.RssiTrigger;
pvStatusBuffer = (PVOID) &prAdapter->rWlanInfo.rCurrBssId.rRssi;
u4StatusBufferSize = sizeof(PARAM_RSSI);
break;
default:
return WLAN_STATUS_INVALID_DATA;
}
/* Get the contents of the StatusBuffer from the test structure. */
kalMemCopy(pvStatusBuffer, pvTestData, u4StatusBufferSize);
kalIndicateStatusAndComplete(prAdapter->prGlueInfo,
WLAN_STATUS_MEDIA_SPECIFIC_INDICATION, pvStatusBuffer, u4StatusBufferSize);
return WLAN_STATUS_SUCCESS;
} /* wlanoidSetTest */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to query the driver's WPA2 status.
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[out] pvQueryBuffer A pointer to the buffer that holds the result of
* the query.
* \param[in] u4QueryBufferLen The length of the query buffer.
* \param[out] pu4QueryInfoLen If the call is successful, returns the number of
* bytes written into the query buffer. If the call
* failed due to invalid length of the query buffer,
* returns the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_INVALID_LENGTH
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidQueryCapability(IN P_ADAPTER_T prAdapter,
OUT PVOID pvQueryBuffer, IN UINT_32 u4QueryBufferLen, OUT PUINT_32 pu4QueryInfoLen)
{
P_PARAM_CAPABILITY_T prCap;
P_PARAM_AUTH_ENCRYPTION_T prAuthenticationEncryptionSupported;
DEBUGFUNC("wlanoidQueryCapability");
ASSERT(prAdapter);
ASSERT(pu4QueryInfoLen);
if (u4QueryBufferLen)
ASSERT(pvQueryBuffer);
*pu4QueryInfoLen = 4 * sizeof(UINT_32) + 14 * sizeof(PARAM_AUTH_ENCRYPTION_T);
if (u4QueryBufferLen < *pu4QueryInfoLen)
return WLAN_STATUS_INVALID_LENGTH;
prCap = (P_PARAM_CAPABILITY_T) pvQueryBuffer;
prCap->u4Length = *pu4QueryInfoLen;
prCap->u4Version = 2; /* WPA2 */
prCap->u4NoOfPMKIDs = CFG_MAX_PMKID_CACHE;
prCap->u4NoOfAuthEncryptPairsSupported = 14;
prAuthenticationEncryptionSupported = &prCap->arAuthenticationEncryptionSupported[0];
/* fill 14 entries of supported settings */
prAuthenticationEncryptionSupported[0].eAuthModeSupported = AUTH_MODE_OPEN;
prAuthenticationEncryptionSupported[0].eEncryptStatusSupported = ENUM_ENCRYPTION_DISABLED;
prAuthenticationEncryptionSupported[1].eAuthModeSupported = AUTH_MODE_OPEN;
prAuthenticationEncryptionSupported[1].eEncryptStatusSupported = ENUM_ENCRYPTION1_ENABLED;
prAuthenticationEncryptionSupported[2].eAuthModeSupported = AUTH_MODE_SHARED;
prAuthenticationEncryptionSupported[2].eEncryptStatusSupported = ENUM_ENCRYPTION_DISABLED;
prAuthenticationEncryptionSupported[3].eAuthModeSupported = AUTH_MODE_SHARED;
prAuthenticationEncryptionSupported[3].eEncryptStatusSupported = ENUM_ENCRYPTION1_ENABLED;
prAuthenticationEncryptionSupported[4].eAuthModeSupported = AUTH_MODE_WPA;
prAuthenticationEncryptionSupported[4].eEncryptStatusSupported = ENUM_ENCRYPTION2_ENABLED;
prAuthenticationEncryptionSupported[5].eAuthModeSupported = AUTH_MODE_WPA;
prAuthenticationEncryptionSupported[5].eEncryptStatusSupported = ENUM_ENCRYPTION3_ENABLED;
prAuthenticationEncryptionSupported[6].eAuthModeSupported = AUTH_MODE_WPA_PSK;
prAuthenticationEncryptionSupported[6].eEncryptStatusSupported = ENUM_ENCRYPTION2_ENABLED;
prAuthenticationEncryptionSupported[7].eAuthModeSupported = AUTH_MODE_WPA_PSK;
prAuthenticationEncryptionSupported[7].eEncryptStatusSupported = ENUM_ENCRYPTION3_ENABLED;
prAuthenticationEncryptionSupported[8].eAuthModeSupported = AUTH_MODE_WPA_NONE;
prAuthenticationEncryptionSupported[8].eEncryptStatusSupported = ENUM_ENCRYPTION2_ENABLED;
prAuthenticationEncryptionSupported[9].eAuthModeSupported = AUTH_MODE_WPA_NONE;
prAuthenticationEncryptionSupported[9].eEncryptStatusSupported = ENUM_ENCRYPTION3_ENABLED;
prAuthenticationEncryptionSupported[10].eAuthModeSupported = AUTH_MODE_WPA2;
prAuthenticationEncryptionSupported[10].eEncryptStatusSupported = ENUM_ENCRYPTION2_ENABLED;
prAuthenticationEncryptionSupported[11].eAuthModeSupported = AUTH_MODE_WPA2;
prAuthenticationEncryptionSupported[11].eEncryptStatusSupported = ENUM_ENCRYPTION3_ENABLED;
prAuthenticationEncryptionSupported[12].eAuthModeSupported = AUTH_MODE_WPA2_PSK;
prAuthenticationEncryptionSupported[12].eEncryptStatusSupported = ENUM_ENCRYPTION2_ENABLED;
prAuthenticationEncryptionSupported[13].eAuthModeSupported = AUTH_MODE_WPA2_PSK;
prAuthenticationEncryptionSupported[13].eEncryptStatusSupported = ENUM_ENCRYPTION3_ENABLED;
return WLAN_STATUS_SUCCESS;
} /* wlanoidQueryCapability */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to query the PMKID in the PMK cache.
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[out] pvQueryBuffer A pointer to the buffer that holds the result of
* the query.
* \param[in] u4QueryBufferLen The length of the query buffer.
* \param[out] pu4QueryInfoLen If the call is successful, returns the number of
* bytes written into the query buffer. If the call
* failed due to invalid length of the query buffer,
* returns the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_INVALID_LENGTH
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidQueryPmkid(IN P_ADAPTER_T prAdapter,
OUT PVOID pvQueryBuffer, IN UINT_32 u4QueryBufferLen, OUT PUINT_32 pu4QueryInfoLen)
{
UINT_32 i;
P_PARAM_PMKID_T prPmkid;
P_AIS_SPECIFIC_BSS_INFO_T prAisSpecBssInfo;
DEBUGFUNC("wlanoidQueryPmkid");
ASSERT(prAdapter);
ASSERT(pu4QueryInfoLen);
if (u4QueryBufferLen)
ASSERT(pvQueryBuffer);
prAisSpecBssInfo = &prAdapter->rWifiVar.rAisSpecificBssInfo;
*pu4QueryInfoLen = OFFSET_OF(PARAM_PMKID_T, arBSSIDInfo) +
prAisSpecBssInfo->u4PmkidCacheCount * sizeof(PARAM_BSSID_INFO_T);
if (u4QueryBufferLen < *pu4QueryInfoLen)
return WLAN_STATUS_INVALID_LENGTH;
prPmkid = (P_PARAM_PMKID_T) pvQueryBuffer;
prPmkid->u4Length = *pu4QueryInfoLen;
prPmkid->u4BSSIDInfoCount = prAisSpecBssInfo->u4PmkidCacheCount;
for (i = 0; i < prAisSpecBssInfo->u4PmkidCacheCount; i++) {
kalMemCopy(prPmkid->arBSSIDInfo[i].arBSSID,
prAisSpecBssInfo->arPmkidCache[i].rBssidInfo.arBSSID, sizeof(PARAM_MAC_ADDRESS));
kalMemCopy(prPmkid->arBSSIDInfo[i].arPMKID,
prAisSpecBssInfo->arPmkidCache[i].rBssidInfo.arPMKID, sizeof(PARAM_PMKID_VALUE));
}
return WLAN_STATUS_SUCCESS;
} /* wlanoidQueryPmkid */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to set the PMKID to the PMK cache in the driver.
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[in] pvSetBuffer A pointer to the buffer that holds the data to be set.
* \param[in] u4SetBufferLen The length of the set buffer.
* \param[out] pu4SetInfoLen If the call is successful, returns the number of
* bytes read from the set buffer. If the call failed
* due to invalid length of the set buffer, returns
* the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_BUFFER_TOO_SHORT
* \retval WLAN_STATUS_INVALID_DATA
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidSetPmkid(IN P_ADAPTER_T prAdapter, IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
UINT_32 i, j;
P_PARAM_PMKID_T prPmkid;
P_AIS_SPECIFIC_BSS_INFO_T prAisSpecBssInfo;
DEBUGFUNC("wlanoidSetPmkid");
DBGLOG(REQ, INFO, "wlanoidSetPmkid\n");
ASSERT(prAdapter);
ASSERT(pu4SetInfoLen);
*pu4SetInfoLen = u4SetBufferLen;
/* It's possibble BSSIDInfoCount is zero, because OS wishes to clean PMKID */
if (u4SetBufferLen < OFFSET_OF(PARAM_PMKID_T, arBSSIDInfo))
return WLAN_STATUS_BUFFER_TOO_SHORT;
ASSERT(pvSetBuffer);
prPmkid = (P_PARAM_PMKID_T) pvSetBuffer;
if (u4SetBufferLen <
((prPmkid->u4BSSIDInfoCount * sizeof(PARAM_BSSID_INFO_T)) + OFFSET_OF(PARAM_PMKID_T, arBSSIDInfo)))
return WLAN_STATUS_INVALID_DATA;
if (prPmkid->u4BSSIDInfoCount > CFG_MAX_PMKID_CACHE)
return WLAN_STATUS_INVALID_DATA;
DBGLOG(REQ, INFO, "Count %lu\n", prPmkid->u4BSSIDInfoCount);
prAisSpecBssInfo = &prAdapter->rWifiVar.rAisSpecificBssInfo;
/* This OID replace everything in the PMKID cache. */
if (prPmkid->u4BSSIDInfoCount == 0) {
prAisSpecBssInfo->u4PmkidCacheCount = 0;
kalMemZero(prAisSpecBssInfo->arPmkidCache, sizeof(PMKID_ENTRY_T) * CFG_MAX_PMKID_CACHE);
}
if ((prAisSpecBssInfo->u4PmkidCacheCount + prPmkid->u4BSSIDInfoCount > CFG_MAX_PMKID_CACHE)) {
prAisSpecBssInfo->u4PmkidCacheCount = 0;
kalMemZero(prAisSpecBssInfo->arPmkidCache, sizeof(PMKID_ENTRY_T) * CFG_MAX_PMKID_CACHE);
}
/*
* The driver can only clear its PMKID cache whenever it make a media disconnect
* indication. Otherwise, it must change the PMKID cache only when set through this OID.
*/
for (i = 0; i < prPmkid->u4BSSIDInfoCount; i++) {
/* Search for desired BSSID. If desired BSSID is found,
* then set the PMKID
*/
if (!rsnSearchPmkidEntry(prAdapter, (PUINT_8) prPmkid->arBSSIDInfo[i].arBSSID, &j)) {
/* No entry found for the specified BSSID, so add one entry */
if (prAisSpecBssInfo->u4PmkidCacheCount < CFG_MAX_PMKID_CACHE - 1) {
j = prAisSpecBssInfo->u4PmkidCacheCount;
kalMemCopy(prAisSpecBssInfo->arPmkidCache[j].rBssidInfo.arBSSID,
prPmkid->arBSSIDInfo[i].arBSSID, sizeof(PARAM_MAC_ADDRESS));
prAisSpecBssInfo->u4PmkidCacheCount++;
} else {
j = CFG_MAX_PMKID_CACHE;
}
}
if (j < CFG_MAX_PMKID_CACHE) {
kalMemCopy(prAisSpecBssInfo->arPmkidCache[j].rBssidInfo.arPMKID,
prPmkid->arBSSIDInfo[i].arPMKID, sizeof(PARAM_PMKID_VALUE));
DBGLOG(RSN, TRACE, "Add BSSID " MACSTR " idx=%lu PMKID value " MACSTR "\n",
MAC2STR(prAisSpecBssInfo->arPmkidCache[j].rBssidInfo.arBSSID), j,
MAC2STR(prAisSpecBssInfo->arPmkidCache[j].rBssidInfo.arPMKID));
prAisSpecBssInfo->arPmkidCache[j].fgPmkidExist = TRUE;
}
}
return WLAN_STATUS_SUCCESS;
} /* wlanoidSetPmkid */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to query the set of supported data rates that
* the radio is capable of running
*
* \param[in] prAdapter Pointer to the Adapter structure
* \param[out] pvQueryBuffer A pointer to the buffer that holds the result of
* the query
* \param[in] u4QueryBufferLen The length of the query buffer
* \param[out] pu4QueryInfoLen If the call is successful, returns the number
* of bytes written into the query buffer. If the
* call failed due to invalid length of the query
* buffer, returns the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_INVALID_LENGTH
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidQuerySupportedRates(IN P_ADAPTER_T prAdapter,
OUT PVOID pvQueryBuffer, IN UINT_32 u4QueryBufferLen, OUT PUINT_32 pu4QueryInfoLen)
{
PARAM_RATES eRate = {
/* BSSBasicRateSet for 802.11n Non-HT rates */
0x8C, /* 6M */
0x92, /* 9M */
0x98, /* 12M */
0xA4, /* 18M */
0xB0, /* 24M */
0xC8, /* 36M */
0xE0, /* 48M */
0xEC /* 54M */
};
DEBUGFUNC("wlanoidQuerySupportedRates");
ASSERT(prAdapter);
ASSERT(pu4QueryInfoLen);
if (u4QueryBufferLen)
ASSERT(pvQueryBuffer);
*pu4QueryInfoLen = sizeof(PARAM_RATES_EX);
if (u4QueryBufferLen < *pu4QueryInfoLen) {
DBGLOG(REQ, WARN, "Invalid length %ld\n", u4QueryBufferLen);
return WLAN_STATUS_INVALID_LENGTH;
}
kalMemCopy(pvQueryBuffer, (PVOID) &eRate, sizeof(PARAM_RATES));
return WLAN_STATUS_SUCCESS;
} /* end of wlanoidQuerySupportedRates() */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to query current desired rates.
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[in] pvQueryBuffer Pointer to the buffer that holds the result of
* the query.
* \param[in] u4QueryBufferLen The length of the query buffer.
* \param[out] pu4QueryInfoLen If the call is successful, returns the number of
* bytes written into the query buffer. If the call
* failed due to invalid length of the query buffer,
* returns the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_INVALID_LENGTH
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidQueryDesiredRates(IN P_ADAPTER_T prAdapter,
OUT PVOID pvQueryBuffer, IN UINT_32 u4QueryBufferLen, OUT PUINT_32 pu4QueryInfoLen)
{
DEBUGFUNC("wlanoidQueryDesiredRates");
ASSERT(prAdapter);
ASSERT(pu4QueryInfoLen);
if (u4QueryBufferLen)
ASSERT(pvQueryBuffer);
*pu4QueryInfoLen = sizeof(PARAM_RATES_EX);
if (u4QueryBufferLen < *pu4QueryInfoLen) {
DBGLOG(REQ, WARN, "Invalid length %ld\n", u4QueryBufferLen);
return WLAN_STATUS_INVALID_LENGTH;
}
kalMemCopy(pvQueryBuffer, (PVOID) &(prAdapter->rWlanInfo.eDesiredRates), sizeof(PARAM_RATES));
return WLAN_STATUS_SUCCESS;
} /* end of wlanoidQueryDesiredRates() */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to Set the desired rates.
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[in] pvSetBuffer Pointer to the buffer that holds the data to be set.
* \param[in] u4SetBufferLen The length of the set buffer.
* \param[out] pu4SetInfoLen If the call is successful, returns the number of
* bytes read from the set buffer. If the call failed
* due to invalid length of the set buffer, returns
* the amount of storage needed.
*
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_INVALID_LENGTH
* \retval WLAN_STATUS_INVALID_DATA
* \retval WLAN_STATUS_ADAPTER_NOT_READY
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidSetDesiredRates(IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
UINT_32 i;
DEBUGFUNC("wlanoidSetDesiredRates");
ASSERT(prAdapter);
ASSERT(pvSetBuffer);
ASSERT(pu4SetInfoLen);
if (u4SetBufferLen < sizeof(PARAM_RATES)) {
DBGLOG(REQ, WARN, "Invalid length %ld\n", u4SetBufferLen);
return WLAN_STATUS_INVALID_LENGTH;
}
*pu4SetInfoLen = sizeof(PARAM_RATES);
if (u4SetBufferLen < sizeof(PARAM_RATES))
return WLAN_STATUS_INVALID_LENGTH;
kalMemCopy((PVOID) &(prAdapter->rWlanInfo.eDesiredRates), pvSetBuffer, sizeof(PARAM_RATES));
prAdapter->rWlanInfo.eLinkAttr.ucDesiredRateLen = PARAM_MAX_LEN_RATES;
for (i = 0; i < PARAM_MAX_LEN_RATES; i++)
prAdapter->rWlanInfo.eLinkAttr.u2DesiredRate[i] = (UINT_16) (prAdapter->rWlanInfo.eDesiredRates[i]);
return wlanSendSetQueryCmd(prAdapter,
CMD_ID_LINK_ATTRIB,
TRUE,
FALSE,
TRUE,
nicCmdEventSetCommon,
nicOidCmdTimeoutCommon,
sizeof(CMD_LINK_ATTRIB),
(PUINT_8) &(prAdapter->rWlanInfo.eLinkAttr), pvSetBuffer, u4SetBufferLen);
} /* end of wlanoidSetDesiredRates() */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to query the maximum frame size in bytes,
* not including the header.
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[out] pvQueryBuffer A pointer to the buffer that holds the result of
* the query.
* \param[in] u4QueryBufferLen The length of the query buffer.
* \param[out] pu4QueryInfoLen If the call is successful, returns the number of
* bytes written into the query buffer. If the
* call failed due to invalid length of the query
* buffer, returns the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_INVALID_LENGTH
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidQueryMaxFrameSize(IN P_ADAPTER_T prAdapter,
OUT PVOID pvQueryBuffer, IN UINT_32 u4QueryBufferLen, OUT PUINT_32 pu4QueryInfoLen)
{
DEBUGFUNC("wlanoidQueryMaxFrameSize");
ASSERT(prAdapter);
ASSERT(pu4QueryInfoLen);
if (u4QueryBufferLen)
ASSERT(pvQueryBuffer);
if (u4QueryBufferLen < sizeof(UINT_32)) {
*pu4QueryInfoLen = sizeof(UINT_32);
return WLAN_STATUS_INVALID_LENGTH;
}
*(PUINT_32) pvQueryBuffer = ETHERNET_MAX_PKT_SZ - ETHERNET_HEADER_SZ;
*pu4QueryInfoLen = sizeof(UINT_32);
return WLAN_STATUS_SUCCESS;
} /* wlanoidQueryMaxFrameSize */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to query the maximum total packet length
* in bytes.
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[out] pvQueryBuffer A pointer to the buffer that holds the result of
* the query.
* \param[in] u4QueryBufferLen The length of the query buffer.
* \param[out] pu4QueryInfoLen If the call is successful, returns the number of
* bytes written into the query buffer. If the call
* failed due to invalid length of the query buffer,
* returns the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_INVALID_LENGTH
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidQueryMaxTotalSize(IN P_ADAPTER_T prAdapter,
OUT PVOID pvQueryBuffer, IN UINT_32 u4QueryBufferLen, OUT PUINT_32 pu4QueryInfoLen)
{
DEBUGFUNC("wlanoidQueryMaxTotalSize");
ASSERT(prAdapter);
ASSERT(pu4QueryInfoLen);
if (u4QueryBufferLen)
ASSERT(pvQueryBuffer);
if (u4QueryBufferLen < sizeof(UINT_32)) {
*pu4QueryInfoLen = sizeof(UINT_32);
return WLAN_STATUS_INVALID_LENGTH;
}
*(PUINT_32) pvQueryBuffer = ETHERNET_MAX_PKT_SZ;
*pu4QueryInfoLen = sizeof(UINT_32);
return WLAN_STATUS_SUCCESS;
} /* wlanoidQueryMaxTotalSize */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to query the vendor ID of the NIC.
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[out] pvQueryBuffer A pointer to the buffer that holds the result of
* the query.
* \param[in] u4QueryBufferLen The length of the query buffer.
* \param[out] pu4QueryInfoLen If the call is successful, returns the number of
* bytes written into the query buffer. If the call
* failed due to invalid length of the query buffer,
* returns the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_INVALID_LENGTH
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidQueryVendorId(IN P_ADAPTER_T prAdapter,
OUT PVOID pvQueryBuffer, IN UINT_32 u4QueryBufferLen, OUT PUINT_32 pu4QueryInfoLen)
{
#if DBG
PUINT_8 cp;
#endif
DEBUGFUNC("wlanoidQueryVendorId");
ASSERT(prAdapter);
ASSERT(pu4QueryInfoLen);
if (u4QueryBufferLen)
ASSERT(pvQueryBuffer);
if (u4QueryBufferLen < sizeof(UINT_32)) {
*pu4QueryInfoLen = sizeof(UINT_32);
return WLAN_STATUS_INVALID_LENGTH;
}
kalMemCopy(pvQueryBuffer, prAdapter->aucMacAddress, 3);
*((PUINT_8) pvQueryBuffer + 3) = 1;
*pu4QueryInfoLen = sizeof(UINT_32);
#if DBG
cp = (PUINT_8) pvQueryBuffer;
DBGLOG(REQ, LOUD, "Vendor ID=%02x-%02x-%02x-%02x\n", cp[0], cp[1], cp[2], cp[3]);
#endif
return WLAN_STATUS_SUCCESS;
} /* wlanoidQueryVendorId */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to query the current RSSI value.
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[in] pvQueryBuffer Pointer to the buffer that holds the result of the query.
* \param[in] u4QueryBufferLen The length of the query buffer.
* \param[out] pu4QueryInfoLen If the call is successful, returns the number of
* bytes written into the query buffer. If the call failed due to invalid length of
* the query buffer, returns the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_BUFFER_TOO_SHORT
* \retval WLAN_STATUS_ADAPTER_NOT_READY
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidQueryRssi(IN P_ADAPTER_T prAdapter,
OUT PVOID pvQueryBuffer, IN UINT_32 u4QueryBufferLen, OUT PUINT_32 pu4QueryInfoLen)
{
DEBUGFUNC("wlanoidQueryRssi");
ASSERT(prAdapter);
ASSERT(pu4QueryInfoLen);
if (u4QueryBufferLen)
ASSERT(pvQueryBuffer);
if (prAdapter->fgIsEnableLpdvt)
return WLAN_STATUS_NOT_SUPPORTED;
*pu4QueryInfoLen = sizeof(PARAM_RSSI);
/* Check for query buffer length */
if (u4QueryBufferLen < *pu4QueryInfoLen) {
DBGLOG(REQ, WARN, "Too short length %ld\n", u4QueryBufferLen);
return WLAN_STATUS_BUFFER_TOO_SHORT;
}
if (kalGetMediaStateIndicated(prAdapter->prGlueInfo) == PARAM_MEDIA_STATE_DISCONNECTED) {
return WLAN_STATUS_ADAPTER_NOT_READY;
} else if (prAdapter->fgIsLinkQualityValid == TRUE &&
(kalGetTimeTick() - prAdapter->rLinkQualityUpdateTime) <= CFG_LINK_QUALITY_VALID_PERIOD) {
PARAM_RSSI rRssi;
rRssi = (PARAM_RSSI) prAdapter->rLinkQuality.cRssi; /* ranged from (-128 ~ 30) in unit of dBm */
if (rRssi > PARAM_WHQL_RSSI_MAX_DBM)
rRssi = PARAM_WHQL_RSSI_MAX_DBM;
else if (rRssi < PARAM_WHQL_RSSI_MIN_DBM)
rRssi = PARAM_WHQL_RSSI_MIN_DBM;
kalMemCopy(pvQueryBuffer, &rRssi, sizeof(PARAM_RSSI));
return WLAN_STATUS_SUCCESS;
}
#ifdef LINUX
return wlanSendSetQueryCmd(prAdapter,
CMD_ID_GET_LINK_QUALITY,
FALSE,
TRUE,
TRUE,
nicCmdEventQueryLinkQuality,
nicOidCmdTimeoutCommon,
*pu4QueryInfoLen, pvQueryBuffer, pvQueryBuffer, u4QueryBufferLen);
#else
return wlanSendSetQueryCmd(prAdapter,
CMD_ID_GET_LINK_QUALITY,
FALSE,
TRUE,
TRUE,
nicCmdEventQueryLinkQuality,
nicOidCmdTimeoutCommon, 0, NULL, pvQueryBuffer, u4QueryBufferLen);
#endif
} /* end of wlanoidQueryRssi() */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to query the current RSSI trigger value.
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[in] pvQueryBuffer Pointer to the buffer that holds the result of the query.
* \param[in] u4QueryBufferLen The length of the query buffer.
* \param[out] pu4QueryInfoLen If the call is successful, returns the number of
* bytes written into the query buffer. If the call failed due to invalid length of
* the query buffer, returns the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_BUFFER_TOO_SHORT
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidQueryRssiTrigger(IN P_ADAPTER_T prAdapter,
OUT PVOID pvQueryBuffer, IN UINT_32 u4QueryBufferLen, OUT PUINT_32 pu4QueryInfoLen)
{
DEBUGFUNC("wlanoidQueryRssiTrigger");
ASSERT(prAdapter);
ASSERT(pu4QueryInfoLen);
if (u4QueryBufferLen)
ASSERT(pvQueryBuffer);
if (prAdapter->rWlanInfo.eRssiTriggerType == ENUM_RSSI_TRIGGER_NONE)
return WLAN_STATUS_ADAPTER_NOT_READY;
*pu4QueryInfoLen = sizeof(PARAM_RSSI);
/* Check for query buffer length */
if (u4QueryBufferLen < *pu4QueryInfoLen) {
DBGLOG(REQ, WARN, "Too short length %ld\n", u4QueryBufferLen);
return WLAN_STATUS_BUFFER_TOO_SHORT;
}
*(PARAM_RSSI *) pvQueryBuffer = prAdapter->rWlanInfo.rRssiTriggerValue;
DBGLOG(REQ, INFO, "RSSI trigger: %ld dBm\n", *(PARAM_RSSI *) pvQueryBuffer);
return WLAN_STATUS_SUCCESS;
} /* wlanoidQueryRssiTrigger */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to set a trigger value of the RSSI event.
*
* \param[in] prAdapter Pointer to the Adapter structure
* \param[in] pvSetBuffer A pointer to the buffer that holds the data to be set.
* \param[in] u4SetBufferLen The length of the set buffer.
* \param[out] pu4SetInfoLen If the call is successful, returns the number of
* bytes read from the set buffer. If the call failed
* due to invalid length of the set buffer, returns the
* amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
*
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidSetRssiTrigger(IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
PARAM_RSSI rRssiTriggerValue;
DEBUGFUNC("wlanoidSetRssiTrigger");
ASSERT(prAdapter);
ASSERT(pvSetBuffer);
ASSERT(pu4SetInfoLen);
*pu4SetInfoLen = sizeof(PARAM_RSSI);
rRssiTriggerValue = *(PARAM_RSSI *) pvSetBuffer;
if (rRssiTriggerValue > PARAM_WHQL_RSSI_MAX_DBM || rRssiTriggerValue < PARAM_WHQL_RSSI_MIN_DBM)
return
/* Save the RSSI trigger value to the Adapter structure */
prAdapter->rWlanInfo.rRssiTriggerValue = rRssiTriggerValue;
/* If the RSSI trigger value is equal to the current RSSI value, the
* indication triggers immediately. We need to indicate the protocol
* that an RSSI status indication event triggers.
*/
if (rRssiTriggerValue == (PARAM_RSSI) (prAdapter->rLinkQuality.cRssi)) {
prAdapter->rWlanInfo.eRssiTriggerType = ENUM_RSSI_TRIGGER_TRIGGERED;
kalIndicateStatusAndComplete(prAdapter->prGlueInfo,
WLAN_STATUS_MEDIA_SPECIFIC_INDICATION,
(PVOID) &prAdapter->rWlanInfo.rRssiTriggerValue, sizeof(PARAM_RSSI));
} else if (rRssiTriggerValue < (PARAM_RSSI) (prAdapter->rLinkQuality.cRssi))
prAdapter->rWlanInfo.eRssiTriggerType = ENUM_RSSI_TRIGGER_GREATER;
else if (rRssiTriggerValue > (PARAM_RSSI) (prAdapter->rLinkQuality.cRssi))
prAdapter->rWlanInfo.eRssiTriggerType = ENUM_RSSI_TRIGGER_LESS;
return WLAN_STATUS_SUCCESS;
} /* wlanoidSetRssiTrigger */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to set a suggested value for the number of
* bytes of received packet data that will be indicated to the protocol
* driver. We just accept the set and ignore this value.
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[in] pvSetBuffer A pointer to the buffer that holds the data to be set.
* \param[in] u4SetBufferLen The length of the set buffer.
* \param[out] pu4SetInfoLen If the call is successful, returns the number of
* bytes read from the set buffer. If the call failed
* due to invalid length of the set buffer, returns
* the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_INVALID_LENGTH
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidSetCurrentLookahead(IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
DEBUGFUNC("wlanoidSetCurrentLookahead");
ASSERT(prAdapter);
ASSERT(pvSetBuffer);
ASSERT(pu4SetInfoLen);
if (u4SetBufferLen < sizeof(UINT_32)) {
*pu4SetInfoLen = sizeof(UINT_32);
return WLAN_STATUS_INVALID_LENGTH;
}
*pu4SetInfoLen = sizeof(UINT_32);
return WLAN_STATUS_SUCCESS;
} /* wlanoidSetCurrentLookahead */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to query the number of frames that the driver
* receives but does not indicate to the protocols due to errors.
*
* \param[in] pvAdapter Pointer to the Adapter structure.
* \param[out] pvQueryBuf A pointer to the buffer that holds the result of
* the query.
* \param[in] u4QueryBufLen The length of the query buffer.
* \param[out] pu4QueryInfoLen If the call is successful, returns the number of
* bytes written into the query buffer. If the call
* failed due to invalid length of the query buffer,
* returns the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_INVALID_LENGTH
* \retval WLAN_STATUS_ADAPTER_NOT_READY
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidQueryRcvError(IN P_ADAPTER_T prAdapter,
IN PVOID pvQueryBuffer, IN UINT_32 u4QueryBufferLen, OUT PUINT_32 pu4QueryInfoLen)
{
DEBUGFUNC("wlanoidQueryRcvError");
DBGLOG(REQ, LOUD, "\n");
ASSERT(prAdapter);
if (u4QueryBufferLen)
ASSERT(pvQueryBuffer);
ASSERT(pu4QueryInfoLen);
if (prAdapter->rAcpiState == ACPI_STATE_D3) {
DBGLOG(REQ, WARN,
"Fail in query receive error! (Adapter not ready). ACPI=D%d, Radio=%d\n",
prAdapter->rAcpiState, prAdapter->fgIsRadioOff);
*pu4QueryInfoLen = sizeof(UINT_32);
return WLAN_STATUS_ADAPTER_NOT_READY;
} else if (u4QueryBufferLen < sizeof(UINT_32)
|| (u4QueryBufferLen > sizeof(UINT_32) && u4QueryBufferLen < sizeof(UINT_64))) {
*pu4QueryInfoLen = sizeof(UINT_64);
return WLAN_STATUS_INVALID_LENGTH;
}
#if CFG_ENABLE_STATISTICS_BUFFERING
if (IsBufferedStatisticsUsable(prAdapter) == TRUE) {
/* @FIXME, RX_ERROR_DROP_COUNT/RX_FIFO_FULL_DROP_COUNT is not calculated */
if (u4QueryBufferLen == sizeof(UINT_32)) {
*pu4QueryInfoLen = sizeof(UINT_32);
*(PUINT_32) pvQueryBuffer = (UINT_32) prAdapter->rStatStruct.rFCSErrorCount.QuadPart;
} else {
*pu4QueryInfoLen = sizeof(UINT_64);
*(PUINT_64) pvQueryBuffer = (UINT_64) prAdapter->rStatStruct.rFCSErrorCount.QuadPart;
}
return WLAN_STATUS_SUCCESS;
}
#endif
return wlanSendSetQueryCmd(prAdapter,
CMD_ID_GET_STATISTICS,
FALSE,
TRUE,
TRUE,
nicCmdEventQueryRecvError,
nicOidCmdTimeoutCommon, 0, NULL, pvQueryBuffer, u4QueryBufferLen);
} /* wlanoidQueryRcvError */
/*----------------------------------------------------------------------------*/
/*! \brief This routine is called to query the number of frames that the NIC
* cannot receive due to lack of NIC receive buffer space.
*
* \param[in] pvAdapter Pointer to the Adapter structure
* \param[in] pvQueryBuf A pointer to the buffer that holds the result of the
* query buffer
* \param[in] u4QueryBufLen The length of the query buffer
* \param[out] pu4QueryInfoLen If the call is successful, returns the number of
* bytes written into the query buffer. If the call
* failed due to invalid length of the query buffer,
* returns the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS If success;
* \retval WLAN_STATUS_INVALID_LENGTH
* \retval WLAN_STATUS_ADAPTER_NOT_READY
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidQueryRcvNoBuffer(IN P_ADAPTER_T prAdapter,
IN PVOID pvQueryBuffer, IN UINT_32 u4QueryBufferLen, OUT PUINT_32 pu4QueryInfoLen)
{
DEBUGFUNC("wlanoidQueryRcvNoBuffer");
DBGLOG(REQ, LOUD, "\n");
ASSERT(prAdapter);
if (u4QueryBufferLen)
ASSERT(pvQueryBuffer);
ASSERT(pu4QueryInfoLen);
if (prAdapter->rAcpiState == ACPI_STATE_D3) {
DBGLOG(REQ, WARN,
"Fail in query receive error! (Adapter not ready). ACPI=D%d, Radio=%d\n",
prAdapter->rAcpiState, prAdapter->fgIsRadioOff);
*pu4QueryInfoLen = sizeof(UINT_32);
return WLAN_STATUS_ADAPTER_NOT_READY;
} else if (u4QueryBufferLen < sizeof(UINT_32)
|| (u4QueryBufferLen > sizeof(UINT_32) && u4QueryBufferLen < sizeof(UINT_64))) {
*pu4QueryInfoLen = sizeof(UINT_64);
return WLAN_STATUS_INVALID_LENGTH;
}
#if CFG_ENABLE_STATISTICS_BUFFERING
if (IsBufferedStatisticsUsable(prAdapter) == TRUE) {
if (u4QueryBufferLen == sizeof(UINT_32)) {
*pu4QueryInfoLen = sizeof(UINT_32);
*(PUINT_32) pvQueryBuffer = (UINT_32) 0; /* @FIXME */
} else {
*pu4QueryInfoLen = sizeof(UINT_64);
*(PUINT_64) pvQueryBuffer = (UINT_64) 0; /* @FIXME */
}
return WLAN_STATUS_SUCCESS;
}
#endif
return wlanSendSetQueryCmd(prAdapter,
CMD_ID_GET_STATISTICS,
FALSE,
TRUE,
TRUE,
nicCmdEventQueryRecvNoBuffer,
nicOidCmdTimeoutCommon, 0, NULL, pvQueryBuffer, u4QueryBufferLen);
} /* wlanoidQueryRcvNoBuffer */
/*----------------------------------------------------------------------------*/
/*! \brief This routine is called to query the number of frames that the NIC
* received and it is CRC error.
*
* \param[in] pvAdapter Pointer to the Adapter structure
* \param[in] pvQueryBuf A pointer to the buffer that holds the result of the
* query buffer
* \param[in] u4QueryBufLen The length of the query buffer
* \param[out] pu4QueryInfoLen If the call is successful, returns the number of
* bytes written into the query buffer. If the call
* failed due to invalid length of the query buffer,
* returns the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS If success;
* \retval WLAN_STATUS_INVALID_LENGTH
* \retval WLAN_STATUS_ADAPTER_NOT_READY
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidQueryRcvCrcError(IN P_ADAPTER_T prAdapter,
IN PVOID pvQueryBuffer, IN UINT_32 u4QueryBufferLen, OUT PUINT_32 pu4QueryInfoLen)
{
DEBUGFUNC("wlanoidQueryRcvCrcError");
DBGLOG(REQ, LOUD, "\n");
ASSERT(prAdapter);
if (u4QueryBufferLen)
ASSERT(pvQueryBuffer);
ASSERT(pu4QueryInfoLen);
if (prAdapter->rAcpiState == ACPI_STATE_D3) {
DBGLOG(REQ, WARN,
"Fail in query receive error! (Adapter not ready). ACPI=D%d, Radio=%d\n",
prAdapter->rAcpiState, prAdapter->fgIsRadioOff);
*pu4QueryInfoLen = sizeof(UINT_32);
return WLAN_STATUS_ADAPTER_NOT_READY;
} else if (u4QueryBufferLen < sizeof(UINT_32)
|| (u4QueryBufferLen > sizeof(UINT_32) && u4QueryBufferLen < sizeof(UINT_64))) {
*pu4QueryInfoLen = sizeof(UINT_64);
return WLAN_STATUS_INVALID_LENGTH;
}
#if CFG_ENABLE_STATISTICS_BUFFERING
if (IsBufferedStatisticsUsable(prAdapter) == TRUE) {
if (u4QueryBufferLen == sizeof(UINT_32)) {
*pu4QueryInfoLen = sizeof(UINT_32);
*(PUINT_32) pvQueryBuffer = (UINT_32) prAdapter->rStatStruct.rFCSErrorCount.QuadPart;
} else {
*pu4QueryInfoLen = sizeof(UINT_64);
*(PUINT_64) pvQueryBuffer = (UINT_64) prAdapter->rStatStruct.rFCSErrorCount.QuadPart;
}
return WLAN_STATUS_SUCCESS;
}
#endif
return wlanSendSetQueryCmd(prAdapter,
CMD_ID_GET_STATISTICS,
FALSE,
TRUE,
TRUE,
nicCmdEventQueryRecvCrcError,
nicOidCmdTimeoutCommon, 0, NULL, pvQueryBuffer, u4QueryBufferLen);
} /* wlanoidQueryRcvCrcError */
/*----------------------------------------------------------------------------*/
/*! \brief This routine is called to query the current 802.11 statistics.
*
* \param[in] pvAdapter Pointer to the Adapter structure
* \param[in] pvQueryBuf A pointer to the buffer that holds the result of the
* query buffer
* \param[in] u4QueryBufLen The length of the query buffer
* \param[out] pu4QueryInfoLen If the call is successful, returns the number of
* bytes written into the query buffer. If the call
* failed due to invalid length of the query buffer,
* returns the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_INVALID_LENGTH
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidQueryStatistics(IN P_ADAPTER_T prAdapter,
IN PVOID pvQueryBuffer, IN UINT_32 u4QueryBufferLen, OUT PUINT_32 pu4QueryInfoLen)
{
PARAM_802_11_STATISTICS_STRUCT_T rStatistics;
DEBUGFUNC("wlanoidQueryStatistics");
DBGLOG(REQ, LOUD, "\n");
ASSERT(prAdapter);
if (u4QueryBufferLen)
ASSERT(pvQueryBuffer);
ASSERT(pu4QueryInfoLen);
*pu4QueryInfoLen = sizeof(PARAM_802_11_STATISTICS_STRUCT_T);
if (prAdapter->rAcpiState == ACPI_STATE_D3) {
DBGLOG(REQ, WARN,
"Fail in query receive error! (Adapter not ready). ACPI=D%d, Radio=%d\n",
prAdapter->rAcpiState, prAdapter->fgIsRadioOff);
*pu4QueryInfoLen = sizeof(UINT_32);
return WLAN_STATUS_ADAPTER_NOT_READY;
} else if (u4QueryBufferLen < sizeof(PARAM_802_11_STATISTICS_STRUCT_T)) {
DBGLOG(REQ, WARN, "Too short length %ld\n", u4QueryBufferLen);
return WLAN_STATUS_INVALID_LENGTH;
}
#if CFG_ENABLE_STATISTICS_BUFFERING
if (IsBufferedStatisticsUsable(prAdapter) == TRUE) {
P_PARAM_802_11_STATISTICS_STRUCT_T prStatistics;
*pu4QueryInfoLen = sizeof(PARAM_802_11_STATISTICS_STRUCT_T);
prStatistics = (P_PARAM_802_11_STATISTICS_STRUCT_T) pvQueryBuffer;
prStatistics->u4Length = sizeof(PARAM_802_11_STATISTICS_STRUCT_T);
prStatistics->rTransmittedFragmentCount = prAdapter->rStatStruct.rTransmittedFragmentCount;
prStatistics->rMulticastTransmittedFrameCount = prAdapter->rStatStruct.rMulticastTransmittedFrameCount;
prStatistics->rFailedCount = prAdapter->rStatStruct.rFailedCount;
prStatistics->rRetryCount = prAdapter->rStatStruct.rRetryCount;
prStatistics->rMultipleRetryCount = prAdapter->rStatStruct.rMultipleRetryCount;
prStatistics->rRTSSuccessCount = prAdapter->rStatStruct.rRTSSuccessCount;
prStatistics->rRTSFailureCount = prAdapter->rStatStruct.rRTSFailureCount;
prStatistics->rACKFailureCount = prAdapter->rStatStruct.rACKFailureCount;
prStatistics->rFrameDuplicateCount = prAdapter->rStatStruct.rFrameDuplicateCount;
prStatistics->rReceivedFragmentCount = prAdapter->rStatStruct.rReceivedFragmentCount;
prStatistics->rMulticastReceivedFrameCount = prAdapter->rStatStruct.rMulticastReceivedFrameCount;
prStatistics->rFCSErrorCount = prAdapter->rStatStruct.rFCSErrorCount;
prStatistics->rTKIPLocalMICFailures.QuadPart = 0;
prStatistics->rTKIPICVErrors.QuadPart = 0;
prStatistics->rTKIPCounterMeasuresInvoked.QuadPart = 0;
prStatistics->rTKIPReplays.QuadPart = 0;
prStatistics->rCCMPFormatErrors.QuadPart = 0;
prStatistics->rCCMPReplays.QuadPart = 0;
prStatistics->rCCMPDecryptErrors.QuadPart = 0;
prStatistics->rFourWayHandshakeFailures.QuadPart = 0;
prStatistics->rWEPUndecryptableCount.QuadPart = 0;
prStatistics->rWEPICVErrorCount.QuadPart = 0;
prStatistics->rDecryptSuccessCount.QuadPart = 0;
prStatistics->rDecryptFailureCount.QuadPart = 0;
return WLAN_STATUS_SUCCESS;
}
#endif
return wlanSendSetQueryCmd(prAdapter,
CMD_ID_GET_STATISTICS,
FALSE,
TRUE,
TRUE,
nicCmdEventQueryStatistics,
nicOidCmdTimeoutCommon,
sizeof(PARAM_802_11_STATISTICS_STRUCT_T), (PUINT_8)&rStatistics,
pvQueryBuffer, u4QueryBufferLen);
} /* wlanoidQueryStatistics */
/*----------------------------------------------------------------------------*/
/*! \brief This routine is called to query current media streaming status.
*
* \param[in] pvAdapter Pointer to the Adapter structure
* \param[in] pvQueryBuf A pointer to the buffer that holds the result of the
* query buffer
* \param[in] u4QueryBufLen The length of the query buffer
* \param[out] pu4QueryInfoLen If the call is successful, returns the number of
* bytes written into the query buffer. If the call
* failed due to invalid length of the query buffer,
* returns the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidQueryMediaStreamMode(IN P_ADAPTER_T prAdapter,
IN PVOID pvQueryBuffer, IN UINT_32 u4QueryBufferLen, OUT PUINT_32 pu4QueryInfoLen)
{
DEBUGFUNC("wlanoidQueryMediaStreamMode");
ASSERT(prAdapter);
ASSERT(pu4QueryInfoLen);
if (u4QueryBufferLen)
ASSERT(pvQueryBuffer);
*pu4QueryInfoLen = sizeof(ENUM_MEDIA_STREAM_MODE);
if (u4QueryBufferLen < *pu4QueryInfoLen) {
DBGLOG(REQ, WARN, "Invalid length %ld\n", u4QueryBufferLen);
return WLAN_STATUS_INVALID_LENGTH;
}
*(P_ENUM_MEDIA_STREAM_MODE) pvQueryBuffer =
prAdapter->rWlanInfo.eLinkAttr.ucMediaStreamMode == 0 ? ENUM_MEDIA_STREAM_OFF : ENUM_MEDIA_STREAM_ON;
return WLAN_STATUS_SUCCESS;
} /* wlanoidQueryMediaStreamMode */
/*----------------------------------------------------------------------------*/
/*! \brief This routine is called to enter media streaming mode or exit media streaming mode
*
* \param[in] pvAdapter Pointer to the Adapter structure
* \param[in] pvQueryBuf A pointer to the buffer that holds the result of the
* query buffer
* \param[in] u4QueryBufLen The length of the query buffer
* \param[out] pu4QueryInfoLen If the call is successful, returns the number of
* bytes written into the query buffer. If the call
* failed due to invalid length of the query buffer,
* returns the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidSetMediaStreamMode(IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
ENUM_MEDIA_STREAM_MODE eStreamMode;
DEBUGFUNC("wlanoidSetMediaStreamMode");
ASSERT(prAdapter);
ASSERT(pvSetBuffer);
ASSERT(pu4SetInfoLen);
if (u4SetBufferLen < sizeof(ENUM_MEDIA_STREAM_MODE)) {
DBGLOG(REQ, WARN, "Invalid length %ld\n", u4SetBufferLen);
return WLAN_STATUS_INVALID_LENGTH;
}
*pu4SetInfoLen = sizeof(ENUM_MEDIA_STREAM_MODE);
eStreamMode = *(P_ENUM_MEDIA_STREAM_MODE) pvSetBuffer;
if (eStreamMode == ENUM_MEDIA_STREAM_OFF)
prAdapter->rWlanInfo.eLinkAttr.ucMediaStreamMode = 0;
else
prAdapter->rWlanInfo.eLinkAttr.ucMediaStreamMode = 1;
return wlanSendSetQueryCmd(prAdapter,
CMD_ID_LINK_ATTRIB,
TRUE,
FALSE,
TRUE,
nicCmdEventSetMediaStreamMode,
nicOidCmdTimeoutCommon,
sizeof(CMD_LINK_ATTRIB),
(PUINT_8) &(prAdapter->rWlanInfo.eLinkAttr), pvSetBuffer, u4SetBufferLen);
} /* wlanoidSetMediaStreamMode */
/*----------------------------------------------------------------------------*/
/*! \brief This routine is called to query the permanent MAC address of the NIC.
*
* \param[in] pvAdapter Pointer to the Adapter structure
* \param[in] pvQueryBuf A pointer to the buffer that holds the result of the
* query buffer
* \param[in] u4QueryBufLen The length of the query buffer
* \param[out] pu4QueryInfoLen If the call is successful, returns the number of
* bytes written into the query buffer. If the call
* failed due to invalid length of the query buffer,
* returns the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidQueryPermanentAddr(IN P_ADAPTER_T prAdapter,
IN PVOID pvQueryBuffer, IN UINT_32 u4QueryBufferLen, OUT PUINT_32 pu4QueryInfoLen)
{
DEBUGFUNC("wlanoidQueryPermanentAddr");
DBGLOG(INIT, LOUD, "\n");
ASSERT(prAdapter);
ASSERT(pu4QueryInfoLen);
if (u4QueryBufferLen)
ASSERT(pvQueryBuffer);
if (u4QueryBufferLen < MAC_ADDR_LEN)
return WLAN_STATUS_BUFFER_TOO_SHORT;
COPY_MAC_ADDR(pvQueryBuffer, prAdapter->rWifiVar.aucPermanentAddress);
*pu4QueryInfoLen = MAC_ADDR_LEN;
return WLAN_STATUS_SUCCESS;
} /* wlanoidQueryPermanentAddr */
/*----------------------------------------------------------------------------*/
/*! \brief This routine is called to query the MAC address the NIC is currently using.
*
* \param[in] pvAdapter Pointer to the Adapter structure
* \param[in] pvQueryBuf A pointer to the buffer that holds the result of the
* query buffer
* \param[in] u4QueryBufLen The length of the query buffer
* \param[out] pu4QueryInfoLen If the call is successful, returns the number of
* bytes written into the query buffer. If the call
* failed due to invalid length of the query buffer,
* returns the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_BUFFER_TOO_SHORT
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidQueryCurrentAddr(IN P_ADAPTER_T prAdapter,
IN PVOID pvQueryBuffer, IN UINT_32 u4QueryBufferLen, OUT PUINT_32 pu4QueryInfoLen)
{
DEBUGFUNC("wlanoidQueryCurrentAddr");
DBGLOG(INIT, LOUD, "\n");
ASSERT(prAdapter);
ASSERT(pu4QueryInfoLen);
if (u4QueryBufferLen)
ASSERT(pvQueryBuffer);
if (u4QueryBufferLen < MAC_ADDR_LEN)
return WLAN_STATUS_BUFFER_TOO_SHORT;
COPY_MAC_ADDR(pvQueryBuffer, prAdapter->rWifiVar.aucMacAddress);
*pu4QueryInfoLen = MAC_ADDR_LEN;
return WLAN_STATUS_SUCCESS;
} /* wlanoidQueryCurrentAddr */
/*----------------------------------------------------------------------------*/
/*! \brief This routine is called to query NIC link speed.
*
* \param[in] pvAdapter Pointer to the Adapter structure
* \param[in] pvQueryBuf A pointer to the buffer that holds the result of the
* query buffer
* \param[in] u4QueryBufLen The length of the query buffer
* \param[out] pu4QueryInfoLen If the call is successful, returns the number of
* bytes written into the query buffer. If the call
* failed due to invalid length of the query buffer,
* returns the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_BUFFER_TOO_SHORT
*
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidQueryLinkSpeed(IN P_ADAPTER_T prAdapter,
IN PVOID pvQueryBuffer, IN UINT_32 u4QueryBufferLen, OUT PUINT_32 pu4QueryInfoLen)
{
DEBUGFUNC("wlanoidQueryLinkSpeed");
ASSERT(prAdapter);
ASSERT(pu4QueryInfoLen);
if (u4QueryBufferLen)
ASSERT(pvQueryBuffer);
if (prAdapter->fgIsEnableLpdvt)
return WLAN_STATUS_NOT_SUPPORTED;
*pu4QueryInfoLen = sizeof(UINT_32);
if (u4QueryBufferLen < sizeof(UINT_32))
return WLAN_STATUS_BUFFER_TOO_SHORT;
if (kalGetMediaStateIndicated(prAdapter->prGlueInfo) != PARAM_MEDIA_STATE_CONNECTED) {
return WLAN_STATUS_ADAPTER_NOT_READY;
} else if (prAdapter->fgIsLinkRateValid == TRUE &&
(kalGetTimeTick() - prAdapter->rLinkRateUpdateTime) <= CFG_LINK_QUALITY_VALID_PERIOD) {
*(PUINT_32) pvQueryBuffer = prAdapter->rLinkQuality.u2LinkSpeed * 5000; /* change to unit of 100bps */
return WLAN_STATUS_SUCCESS;
} else {
return wlanSendSetQueryCmd(prAdapter,
CMD_ID_GET_LINK_QUALITY,
FALSE,
TRUE,
TRUE,
nicCmdEventQueryLinkSpeed,
nicOidCmdTimeoutCommon, 0, NULL, pvQueryBuffer, u4QueryBufferLen);
}
} /* end of wlanoidQueryLinkSpeed() */
#if CFG_SUPPORT_QA_TOOL
#if CFG_SUPPORT_BUFFER_MODE
WLAN_STATUS
wlanoidSetEfusBufferMode(IN P_ADAPTER_T prAdapter, IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen,
OUT PUINT_32 pu4SetInfoLen)
{
P_PARAM_CUSTOM_EFUSE_BUFFER_MODE_T prSetEfuseBufModeInfo;
CMD_EFUSE_BUFFER_MODE_T *prCmdSetEfuseBufModeInfo = NULL;
PFN_CMD_DONE_HANDLER pfCmdDoneHandler;
UINT_32 u4EfuseContentSize, u4QueryInfoLen;
BOOLEAN fgSetQuery, fgNeedResp;
WLAN_STATUS rWlanStatus = WLAN_STATUS_SUCCESS;
DEBUGFUNC("wlanoidSetEfusBufferMode");
ASSERT(prAdapter);
ASSERT(pu4SetInfoLen);
ASSERT(pvSetBuffer);
/* get the buffer mode info */
prSetEfuseBufModeInfo = (P_PARAM_CUSTOM_EFUSE_BUFFER_MODE_T) pvSetBuffer;
/* copy command header */
prCmdSetEfuseBufModeInfo =
(CMD_EFUSE_BUFFER_MODE_T *) kalMemAlloc(sizeof(CMD_EFUSE_BUFFER_MODE_T), VIR_MEM_TYPE);
if (prCmdSetEfuseBufModeInfo == NULL)
return WLAN_STATUS_FAILURE;
kalMemZero(prCmdSetEfuseBufModeInfo, sizeof(CMD_EFUSE_BUFFER_MODE_T));
prCmdSetEfuseBufModeInfo->ucSourceMode = prSetEfuseBufModeInfo->ucSourceMode;
prCmdSetEfuseBufModeInfo->ucCount = prSetEfuseBufModeInfo->ucCount;
prCmdSetEfuseBufModeInfo->ucCmdType = prSetEfuseBufModeInfo->ucCmdType;
prCmdSetEfuseBufModeInfo->ucReserved = prSetEfuseBufModeInfo->ucReserved;
/* decide content size and SetQuery / NeedResp flag */
if (prAdapter->fgIsSupportBufferBinSize16Byte == TRUE) {
u4EfuseContentSize = sizeof(BIN_CONTENT_T) * EFUSE_CONTENT_SIZE;
pfCmdDoneHandler = nicCmdEventSetCommon;
fgSetQuery = TRUE;
fgNeedResp = FALSE;
} else {
#if (CFG_FW_Report_Efuse_Address == 1)
u4EfuseContentSize = (prAdapter->u4EfuseEndAddress) - (prAdapter->u4EfuseStartAddress) + 1;
#else
u4EfuseContentSize = EFUSE_CONTENT_BUFFER_SIZE;
#endif
pfCmdDoneHandler = NULL;
fgSetQuery = FALSE;
fgNeedResp = TRUE;
}
u4QueryInfoLen = OFFSET_OF(CMD_EFUSE_BUFFER_MODE_T, aBinContent) + u4EfuseContentSize;
if (u4SetBufferLen < u4QueryInfoLen) {
kalMemFree(prCmdSetEfuseBufModeInfo, VIR_MEM_TYPE, sizeof(CMD_EFUSE_BUFFER_MODE_T));
return WLAN_STATUS_INVALID_LENGTH;
}
*pu4SetInfoLen = u4QueryInfoLen;
kalMemCopy(prCmdSetEfuseBufModeInfo->aBinContent, prSetEfuseBufModeInfo->aBinContent,
u4EfuseContentSize);
rWlanStatus = wlanSendSetQueryExtCmd(prAdapter,
CMD_ID_LAYER_0_EXT_MAGIC_NUM,
EXT_CMD_ID_EFUSE_BUFFER_MODE,
fgSetQuery,
fgNeedResp,
TRUE,
pfCmdDoneHandler,
nicOidCmdTimeoutCommon,
u4QueryInfoLen,
(PUINT_8) (prCmdSetEfuseBufModeInfo),
pvSetBuffer, u4SetBufferLen);
kalMemFree(prCmdSetEfuseBufModeInfo, VIR_MEM_TYPE, sizeof(CMD_EFUSE_BUFFER_MODE_T));
return rWlanStatus;
}
/*#if (CFG_EEPROM_PAGE_ACCESS == 1)*/
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to read efuse content.
*
* \param[in] pvAdapter Pointer to the Adapter structure.
* \param[out] pvQueryBuf A pointer to the buffer that holds the result of
* the query.
* \param[in] u4QueryBufLen The length of the query buffer.
* \param[out] pu4QueryInfoLen If the call is successful, returns the number of
* bytes written into the query buffer. If the call
* failed due to invalid length of the query buffer,
* returns the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_INVALID_LENGTH
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidQueryProcessAccessEfuseRead(IN P_ADAPTER_T prAdapter, IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen,
OUT PUINT_32 pu4SetInfoLen)
{
P_PARAM_CUSTOM_ACCESS_EFUSE_T prSetAccessEfuseInfo;
CMD_ACCESS_EFUSE_T rCmdSetAccessEfuse;
WLAN_STATUS rWlanStatus = WLAN_STATUS_SUCCESS;
DEBUGFUNC("wlanoidQueryProcessAccessEfuseRead");
ASSERT(prAdapter);
ASSERT(pu4SetInfoLen);
*pu4SetInfoLen = sizeof(PARAM_CUSTOM_ACCESS_EFUSE_T);
if (u4SetBufferLen < sizeof(PARAM_CUSTOM_ACCESS_EFUSE_T))
return WLAN_STATUS_INVALID_LENGTH;
ASSERT(pvSetBuffer);
prSetAccessEfuseInfo = (P_PARAM_CUSTOM_ACCESS_EFUSE_T) pvSetBuffer;
kalMemSet(&rCmdSetAccessEfuse, 0, sizeof(CMD_ACCESS_EFUSE_T));
rCmdSetAccessEfuse.u4Address = prSetAccessEfuseInfo->u4Address;
rCmdSetAccessEfuse.u4Valid = prSetAccessEfuseInfo->u4Valid;
DBGLOG(INIT, INFO, "MT6632 : wlanoidQueryProcessAccessEfuseRead, address=%d\n", rCmdSetAccessEfuse.u4Address);
kalMemCopy(rCmdSetAccessEfuse.aucData, prSetAccessEfuseInfo->aucData,
sizeof(UINT_8) * 16);
rWlanStatus = wlanSendSetQueryExtCmd(prAdapter,
CMD_ID_LAYER_0_EXT_MAGIC_NUM,
EXT_CMD_ID_EFUSE_ACCESS,
FALSE, /* Query Bit: True->write False->read*/
TRUE,
TRUE,
NULL, /* No Tx done function wait until fw ack */
nicOidCmdTimeoutCommon,
sizeof(CMD_ACCESS_EFUSE_T),
(PUINT_8) (&rCmdSetAccessEfuse), pvSetBuffer, u4SetBufferLen);
return rWlanStatus;
}
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to write efuse content.
*
* \param[in] pvAdapter Pointer to the Adapter structure.
* \param[out] pvQueryBuf A pointer to the buffer that holds the result of
* the query.
* \param[in] u4QueryBufLen The length of the query buffer.
* \param[out] pu4QueryInfoLen If the call is successful, returns the number of
* bytes written into the query buffer. If the call
* failed due to invalid length of the query buffer,
* returns the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_INVALID_LENGTH
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidQueryProcessAccessEfuseWrite(IN P_ADAPTER_T prAdapter, IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen,
OUT PUINT_32 pu4SetInfoLen)
{
P_PARAM_CUSTOM_ACCESS_EFUSE_T prSetAccessEfuseInfo;
CMD_ACCESS_EFUSE_T rCmdSetAccessEfuse;
WLAN_STATUS rWlanStatus = WLAN_STATUS_SUCCESS;
DEBUGFUNC("wlanoidQueryProcessAccessEfuseWrite");
DBGLOG(INIT, INFO, "MT6632 : wlanoidQueryProcessAccessEfuseWrite\n");
ASSERT(prAdapter);
ASSERT(pu4SetInfoLen);
*pu4SetInfoLen = sizeof(PARAM_CUSTOM_ACCESS_EFUSE_T);
if (u4SetBufferLen < sizeof(PARAM_CUSTOM_ACCESS_EFUSE_T))
return WLAN_STATUS_INVALID_LENGTH;
ASSERT(pvSetBuffer);
prSetAccessEfuseInfo = (P_PARAM_CUSTOM_ACCESS_EFUSE_T) pvSetBuffer;
kalMemSet(&rCmdSetAccessEfuse, 0, sizeof(CMD_ACCESS_EFUSE_T));
rCmdSetAccessEfuse.u4Address = prSetAccessEfuseInfo->u4Address;
rCmdSetAccessEfuse.u4Valid = prSetAccessEfuseInfo->u4Valid;
DBGLOG(INIT, INFO, "MT6632 : wlanoidQueryProcessAccessEfuseWrite, address=%d\n", rCmdSetAccessEfuse.u4Address);
kalMemCopy(rCmdSetAccessEfuse.aucData, prSetAccessEfuseInfo->aucData,
sizeof(UINT_8) * 16);
rWlanStatus = wlanSendSetQueryExtCmd(prAdapter,
CMD_ID_LAYER_0_EXT_MAGIC_NUM,
EXT_CMD_ID_EFUSE_ACCESS,
TRUE, /* Query Bit: True->write False->read*/
TRUE,
TRUE,
NULL, /* No Tx done function wait until fw ack */
nicOidCmdTimeoutCommon,
sizeof(CMD_ACCESS_EFUSE_T),
(PUINT_8) (&rCmdSetAccessEfuse), pvSetBuffer, u4SetBufferLen);
return rWlanStatus;
}
WLAN_STATUS
wlanoidQueryEfuseFreeBlock(IN P_ADAPTER_T prAdapter, IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen,
OUT PUINT_32 pu4SetInfoLen)
{
P_PARAM_CUSTOM_EFUSE_FREE_BLOCK_T prGetEfuseFreeBlockInfo;
CMD_EFUSE_FREE_BLOCK_T rCmdGetEfuseFreeBlock;
WLAN_STATUS rWlanStatus = WLAN_STATUS_SUCCESS;
DEBUGFUNC("wlanoidQueryEfuseFreeBlock");
ASSERT(prAdapter);
ASSERT(pu4SetInfoLen);
*pu4SetInfoLen = sizeof(PARAM_CUSTOM_EFUSE_FREE_BLOCK_T);
if (u4SetBufferLen < sizeof(PARAM_CUSTOM_EFUSE_FREE_BLOCK_T))
return WLAN_STATUS_INVALID_LENGTH;
ASSERT(pvSetBuffer);
prGetEfuseFreeBlockInfo = (P_PARAM_CUSTOM_EFUSE_FREE_BLOCK_T) pvSetBuffer;
kalMemSet(&rCmdGetEfuseFreeBlock, 0, sizeof(CMD_EFUSE_FREE_BLOCK_T));
rWlanStatus = wlanSendSetQueryExtCmd(prAdapter,
CMD_ID_LAYER_0_EXT_MAGIC_NUM,
EXT_CMD_ID_EFUSE_FREE_BLOCK,
FALSE, /* Query Bit: True->write False->read*/
TRUE,
TRUE,
NULL, /* No Tx done function wait until fw ack */
nicOidCmdTimeoutCommon,
sizeof(CMD_EFUSE_FREE_BLOCK_T),
(PUINT_8) (&rCmdGetEfuseFreeBlock), pvSetBuffer, u4SetBufferLen);
return rWlanStatus;
}
WLAN_STATUS
wlanoidQueryGetTxPower(IN P_ADAPTER_T prAdapter, IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen,
OUT PUINT_32 pu4SetInfoLen)
{
P_PARAM_CUSTOM_GET_TX_POWER_T prGetTxPowerInfo;
CMD_GET_TX_POWER_T rCmdGetTxPower;
WLAN_STATUS rWlanStatus = WLAN_STATUS_SUCCESS;
DEBUGFUNC("wlanoidQueryGetTxPower");
ASSERT(prAdapter);
ASSERT(pu4SetInfoLen);
*pu4SetInfoLen = sizeof(P_PARAM_CUSTOM_GET_TX_POWER_T);
if (u4SetBufferLen < sizeof(P_PARAM_CUSTOM_GET_TX_POWER_T))
return WLAN_STATUS_INVALID_LENGTH;
ASSERT(pvSetBuffer);
prGetTxPowerInfo = (P_PARAM_CUSTOM_GET_TX_POWER_T) pvSetBuffer;
kalMemSet(&rCmdGetTxPower, 0, sizeof(CMD_GET_TX_POWER_T));
rCmdGetTxPower.ucTxPwrType = EXT_EVENT_TARGET_TX_POWER;
rCmdGetTxPower.ucCenterChannel = prGetTxPowerInfo->ucCenterChannel;
rCmdGetTxPower.ucDbdcIdx = prGetTxPowerInfo->ucDbdcIdx;
rCmdGetTxPower.ucBand = prGetTxPowerInfo->ucBand;
rWlanStatus = wlanSendSetQueryExtCmd(prAdapter,
CMD_ID_LAYER_0_EXT_MAGIC_NUM,
EXT_CMD_ID_GET_TX_POWER,
FALSE, /* Query Bit: True->write False->read*/
TRUE,
TRUE,
NULL, /* No Tx done function wait until fw ack */
nicOidCmdTimeoutCommon,
sizeof(CMD_GET_TX_POWER_T),
(PUINT_8) (&rCmdGetTxPower), pvSetBuffer, u4SetBufferLen);
return rWlanStatus;
}
/*#endif*/
#endif /* CFG_SUPPORT_BUFFER_MODE */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to query RX statistics.
*
* \param[in] pvAdapter Pointer to the Adapter structure.
* \param[out] pvQueryBuf A pointer to the buffer that holds the result of
* the query.
* \param[in] u4QueryBufLen The length of the query buffer.
* \param[out] pu4QueryInfoLen If the call is successful, returns the number of
* bytes written into the query buffer. If the call
* failed due to invalid length of the query buffer,
* returns the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_INVALID_LENGTH
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidQueryRxStatistics(IN P_ADAPTER_T prAdapter,
IN PVOID pvQueryBuffer, IN UINT_32 u4QueryBufferLen, OUT PUINT_32 pu4QueryInfoLen)
{
P_PARAM_CUSTOM_ACCESS_RX_STAT prRxStatistics;
P_CMD_ACCESS_RX_STAT prCmdAccessRxStat;
CMD_ACCESS_RX_STAT rCmdAccessRxStat;
WLAN_STATUS rStatus = WLAN_STATUS_SUCCESS;
/* UINT_32 u4MemSize = PARAM_MEM_DUMP_MAX_SIZE; */
UINT_32 u4SeqNum = 0;
UINT_32 u4TotalNum = 0;
prCmdAccessRxStat = &rCmdAccessRxStat;
DEBUGFUNC("wlanoidQueryRxStatistics");
DBGLOG(INIT, LOUD, "\n");
DBGLOG(INIT, ERROR, "MT6632 : wlanoidQueryRxStatistics\n");
prRxStatistics = (P_PARAM_CUSTOM_ACCESS_RX_STAT) pvQueryBuffer;
*pu4QueryInfoLen = 8 + prRxStatistics->u4TotalNum;
u4SeqNum = prRxStatistics->u4SeqNum;
u4TotalNum = prRxStatistics->u4TotalNum;
do {
prCmdAccessRxStat->u4SeqNum = u4SeqNum;
prCmdAccessRxStat->u4TotalNum = u4TotalNum;
rStatus = wlanSendSetQueryCmd(prAdapter,
CMD_ID_ACCESS_RX_STAT,
FALSE,
TRUE,
TRUE,
nicCmdEventQueryRxStatistics,
nicOidCmdTimeoutCommon,
sizeof(CMD_ACCESS_RX_STAT),
(PUINT_8) prCmdAccessRxStat, pvQueryBuffer, u4QueryBufferLen);
} while (FALSE);
return rStatus;
}
#if CFG_SUPPORT_TX_BF
WLAN_STATUS
wlanoidStaRecUpdate(IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
P_CMD_STAREC_UPDATE_T prStaRecUpdateInfo;
P_CMD_STAREC_COMMON_T prStaRecCmm;
WLAN_STATUS rWlanStatus = WLAN_STATUS_SUCCESS;
DEBUGFUNC("wlanoidStaRecUpdate");
ASSERT(prAdapter);
ASSERT(pu4SetInfoLen);
*pu4SetInfoLen = sizeof(CMD_STAREC_COMMON_T);
if (u4SetBufferLen < sizeof(CMD_STAREC_COMMON_T))
return WLAN_STATUS_INVALID_LENGTH;
ASSERT(pvSetBuffer);
prStaRecUpdateInfo =
(P_CMD_STAREC_UPDATE_T) cnmMemAlloc(prAdapter, RAM_TYPE_MSG, (CMD_STAREC_UPDATE_HDR_SIZE + u4SetBufferLen));
if (!prStaRecUpdateInfo) {
DBGLOG(INIT, ERROR, "Allocate P_CMD_DEV_INFO_UPDATE_T ==> FAILED.\n");
return WLAN_STATUS_FAILURE;
}
/* fix me: configurable ucBssIndex */
prStaRecCmm = (P_CMD_STAREC_COMMON_T) pvSetBuffer;
prStaRecUpdateInfo->ucBssIndex = 0;
prStaRecUpdateInfo->ucWlanIdx = prStaRecCmm->u2Reserve1;
prStaRecUpdateInfo->u2TotalElementNum = 1;
kalMemCopy(prStaRecUpdateInfo->aucBuffer, pvSetBuffer, u4SetBufferLen);
rWlanStatus = wlanSendSetQueryExtCmd(prAdapter,
CMD_ID_LAYER_0_EXT_MAGIC_NUM,
EXT_CMD_ID_STAREC_UPDATE,
TRUE,
FALSE,
TRUE,
nicCmdEventSetCommon,
nicOidCmdTimeoutCommon,
(CMD_STAREC_UPDATE_HDR_SIZE + u4SetBufferLen),
(PUINT_8) prStaRecUpdateInfo, NULL, 0);
cnmMemFree(prAdapter, prStaRecUpdateInfo);
return rWlanStatus;
}
WLAN_STATUS
wlanoidStaRecBFUpdate(IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
P_CMD_STAREC_UPDATE_T prStaRecUpdateInfo;
P_CMD_STAREC_BF prStaRecBF;
WLAN_STATUS rWlanStatus = WLAN_STATUS_SUCCESS;
DEBUGFUNC("wlanoidStaRecBFUpdate");
ASSERT(prAdapter);
ASSERT(pu4SetInfoLen);
*pu4SetInfoLen = sizeof(CMD_STAREC_BF);
if (u4SetBufferLen < sizeof(CMD_STAREC_BF))
return WLAN_STATUS_INVALID_LENGTH;
ASSERT(pvSetBuffer);
prStaRecUpdateInfo =
(P_CMD_STAREC_UPDATE_T) cnmMemAlloc(prAdapter, RAM_TYPE_MSG, (CMD_STAREC_UPDATE_HDR_SIZE + u4SetBufferLen));
if (!prStaRecUpdateInfo) {
DBGLOG(INIT, ERROR, "Allocate P_CMD_DEV_INFO_UPDATE_T ==> FAILED.\n");
return WLAN_STATUS_FAILURE;
}
/* fix me: configurable ucBssIndex */
prStaRecBF = (P_CMD_STAREC_BF) pvSetBuffer;
prStaRecUpdateInfo->ucBssIndex = prStaRecBF->ucReserved[0];
prStaRecUpdateInfo->ucWlanIdx = prStaRecBF->ucReserved[1];
prStaRecUpdateInfo->u2TotalElementNum = 1;
kalMemCopy(prStaRecUpdateInfo->aucBuffer, pvSetBuffer, u4SetBufferLen);
rWlanStatus = wlanSendSetQueryExtCmd(prAdapter,
CMD_ID_LAYER_0_EXT_MAGIC_NUM,
EXT_CMD_ID_STAREC_UPDATE,
TRUE,
FALSE,
TRUE,
nicCmdEventSetCommon,
nicOidCmdTimeoutCommon,
(CMD_STAREC_UPDATE_HDR_SIZE + u4SetBufferLen),
(PUINT_8) prStaRecUpdateInfo, NULL, 0);
cnmMemFree(prAdapter, prStaRecUpdateInfo);
return rWlanStatus;
}
/*----------------------------------------------------------------------------*/
/*!
* \brief extend command packet generation utility
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[in] ucCID Command ID
* \param[in] ucExtCID Extend command ID
* \param[in] fgSetQuery Set or Query
* \param[in] fgNeedResp Need for response
* \param[in] pfCmdDoneHandler Function pointer when command is done
* \param[in] u4SetQueryInfoLen The length of the set/query buffer
* \param[in] pucInfoBuffer Pointer to set/query buffer
*
*
* \retval WLAN_STATUS_PENDING
* \retval WLAN_STATUS_FAILURE
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanSendSetQueryExtCmd(IN P_ADAPTER_T prAdapter,
UINT_8 ucCID,
UINT_8 ucExtCID,
BOOLEAN fgSetQuery,
BOOLEAN fgNeedResp,
BOOLEAN fgIsOid,
PFN_CMD_DONE_HANDLER pfCmdDoneHandler,
PFN_CMD_TIMEOUT_HANDLER pfCmdTimeoutHandler,
UINT_32 u4SetQueryInfoLen,
PUINT_8 pucInfoBuffer, OUT PVOID pvSetQueryBuffer, IN UINT_32 u4SetQueryBufferLen)
{
P_GLUE_INFO_T prGlueInfo;
P_CMD_INFO_T prCmdInfo;
P_WIFI_CMD_T prWifiCmd;
UINT_8 ucCmdSeqNum;
prGlueInfo = prAdapter->prGlueInfo;
prCmdInfo = cmdBufAllocateCmdInfo(prAdapter, (CMD_HDR_SIZE + u4SetQueryInfoLen));
DEBUGFUNC("wlanSendSetQueryCmd");
if (!prCmdInfo) {
DBGLOG(INIT, ERROR, "Allocate CMD_INFO_T ==> FAILED.\n");
return WLAN_STATUS_FAILURE;
}
/* increase command sequence number */
ucCmdSeqNum = nicIncreaseCmdSeqNum(prAdapter);
DBGLOG(REQ, TRACE, "ucCmdSeqNum =%d\n", ucCmdSeqNum);
/* Setup common CMD Info Packet */
prCmdInfo->eCmdType = COMMAND_TYPE_NETWORK_IOCTL;
prCmdInfo->u2InfoBufLen = (UINT_16) (CMD_HDR_SIZE + u4SetQueryInfoLen);
prCmdInfo->pfCmdDoneHandler = pfCmdDoneHandler;
prCmdInfo->pfCmdTimeoutHandler = pfCmdTimeoutHandler;
prCmdInfo->fgIsOid = fgIsOid;
prCmdInfo->ucCID = ucCID;
prCmdInfo->fgSetQuery = fgSetQuery;
prCmdInfo->fgNeedResp = fgNeedResp;
prCmdInfo->ucCmdSeqNum = ucCmdSeqNum;
prCmdInfo->u4SetInfoLen = u4SetQueryInfoLen;
prCmdInfo->pvInformationBuffer = pvSetQueryBuffer;
prCmdInfo->u4InformationBufferLength = u4SetQueryBufferLen;
/* Setup WIFI_CMD_T (no payload) */
prWifiCmd = (P_WIFI_CMD_T) (prCmdInfo->pucInfoBuffer);
prWifiCmd->u2TxByteCount = prCmdInfo->u2InfoBufLen;
prWifiCmd->u2PQ_ID = CMD_PQ_ID;
prWifiCmd->u2Length = prCmdInfo->u2InfoBufLen - (UINT_16) OFFSET_OF(WIFI_CMD_T, u2Length);
prWifiCmd->u2PqId = CMD_PQ_ID;
prWifiCmd->ucPktTypeID = CMD_PACKET_TYPE_ID;
prWifiCmd->ucCID = prCmdInfo->ucCID;
prWifiCmd->ucExtenCID = ucExtCID;
prWifiCmd->ucSetQuery = prCmdInfo->fgSetQuery;
prWifiCmd->ucSeqNum = prCmdInfo->ucCmdSeqNum;
if (u4SetQueryInfoLen > 0 && pucInfoBuffer != NULL)
kalMemCopy(prWifiCmd->aucBuffer, pucInfoBuffer, u4SetQueryInfoLen);
/* insert into prCmdQueue */
kalEnqueueCommand(prGlueInfo, (P_QUE_ENTRY_T) prCmdInfo);
/* wakeup txServiceThread later */
GLUE_SET_EVENT(prGlueInfo);
return WLAN_STATUS_PENDING;
}
WLAN_STATUS
wlanoidBssInfoBasic(IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
P_CMD_BSS_INFO_UPDATE_T prBssInfoUpdateBasic;
WLAN_STATUS rWlanStatus = WLAN_STATUS_SUCCESS;
DEBUGFUNC("wlanoidManualAssoc");
ASSERT(prAdapter);
ASSERT(pu4SetInfoLen);
*pu4SetInfoLen = sizeof(CMD_BSSINFO_BASIC_T);
if (u4SetBufferLen < sizeof(CMD_BSSINFO_BASIC_T))
return WLAN_STATUS_INVALID_LENGTH;
ASSERT(pvSetBuffer);
prBssInfoUpdateBasic = cnmMemAlloc(prAdapter, RAM_TYPE_MSG, (CMD_BSSINFO_UPDATE_HDR_SIZE + u4SetBufferLen));
if (!prBssInfoUpdateBasic) {
DBGLOG(INIT, ERROR, "Allocate P_CMD_DEV_INFO_UPDATE_T ==> FAILED.\n");
return WLAN_STATUS_FAILURE;
}
/* fix me: configurable ucBssIndex */
prBssInfoUpdateBasic->ucBssIndex = 0;
prBssInfoUpdateBasic->u2TotalElementNum = 1;
kalMemCopy(prBssInfoUpdateBasic->aucBuffer, pvSetBuffer, u4SetBufferLen);
rWlanStatus = wlanSendSetQueryExtCmd(prAdapter,
CMD_ID_LAYER_0_EXT_MAGIC_NUM,
EXT_CMD_ID_BSSINFO_UPDATE,
TRUE,
FALSE,
TRUE,
nicCmdEventSetCommon,
nicOidCmdTimeoutCommon,
(CMD_BSSINFO_UPDATE_HDR_SIZE + u4SetBufferLen),
(PUINT_8) prBssInfoUpdateBasic, NULL, 0);
cnmMemFree(prAdapter, prBssInfoUpdateBasic);
return rWlanStatus;
}
WLAN_STATUS
wlanoidDevInfoActive(IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
P_CMD_DEV_INFO_UPDATE_T prDevInfoUpdateActive;
WLAN_STATUS rWlanStatus = WLAN_STATUS_SUCCESS;
DEBUGFUNC("wlanoidManualAssoc");
ASSERT(prAdapter);
ASSERT(pu4SetInfoLen);
*pu4SetInfoLen = sizeof(CMD_DEVINFO_ACTIVE_T);
if (u4SetBufferLen < sizeof(CMD_DEVINFO_ACTIVE_T))
return WLAN_STATUS_INVALID_LENGTH;
ASSERT(pvSetBuffer);
prDevInfoUpdateActive = cnmMemAlloc(prAdapter, RAM_TYPE_MSG, (CMD_DEVINFO_UPDATE_HDR_SIZE + u4SetBufferLen));
if (!prDevInfoUpdateActive) {
DBGLOG(INIT, ERROR, "Allocate P_CMD_DEV_INFO_UPDATE_T ==> FAILED.\n");
return WLAN_STATUS_FAILURE;
}
/* fix me: configurable ucOwnMacIdx */
prDevInfoUpdateActive->ucOwnMacIdx = 0;
prDevInfoUpdateActive->ucAppendCmdTLV = 0;
prDevInfoUpdateActive->u2TotalElementNum = 1;
kalMemCopy(prDevInfoUpdateActive->aucBuffer, pvSetBuffer, u4SetBufferLen);
rWlanStatus = wlanSendSetQueryExtCmd(prAdapter,
CMD_ID_LAYER_0_EXT_MAGIC_NUM,
EXT_CMD_ID_DEVINFO_UPDATE,
TRUE,
FALSE,
TRUE,
nicCmdEventSetCommon,
nicOidCmdTimeoutCommon,
(CMD_DEVINFO_UPDATE_HDR_SIZE + u4SetBufferLen),
(PUINT_8) prDevInfoUpdateActive, NULL, 0);
cnmMemFree(prAdapter, prDevInfoUpdateActive);
return rWlanStatus;
}
WLAN_STATUS
wlanoidManualAssoc(IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
P_CMD_STAREC_UPDATE_T prStaRecManualAssoc;
P_CMD_MANUAL_ASSOC_STRUCT_T prManualAssoc;
WLAN_STATUS rWlanStatus = WLAN_STATUS_SUCCESS;
DEBUGFUNC("wlanoidManualAssoc");
ASSERT(prAdapter);
ASSERT(pu4SetInfoLen);
*pu4SetInfoLen = sizeof(CMD_STAREC_UPDATE_T);
if (u4SetBufferLen < sizeof(CMD_STAREC_UPDATE_T))
return WLAN_STATUS_INVALID_LENGTH;
ASSERT(pvSetBuffer);
prStaRecManualAssoc = cnmMemAlloc(prAdapter, RAM_TYPE_MSG, (CMD_STAREC_UPDATE_HDR_SIZE + u4SetBufferLen));
if (!prStaRecManualAssoc) {
DBGLOG(INIT, ERROR, "Allocate P_CMD_STAREC_UPDATE_T ==> FAILED.\n");
return WLAN_STATUS_FAILURE;
}
prManualAssoc = (P_CMD_MANUAL_ASSOC_STRUCT_T) pvSetBuffer;
prStaRecManualAssoc->ucWlanIdx = prManualAssoc->ucWtbl;
prStaRecManualAssoc->ucBssIndex = prManualAssoc->ucOwnmac;
prStaRecManualAssoc->u2TotalElementNum = 1;
kalMemCopy(prStaRecManualAssoc->aucBuffer, pvSetBuffer, u4SetBufferLen);
rWlanStatus = wlanSendSetQueryExtCmd(prAdapter,
CMD_ID_LAYER_0_EXT_MAGIC_NUM,
EXT_CMD_ID_STAREC_UPDATE,
TRUE,
FALSE,
TRUE,
nicCmdEventSetCommon,
nicOidCmdTimeoutCommon,
(CMD_STAREC_UPDATE_HDR_SIZE + u4SetBufferLen),
(PUINT_8) prStaRecManualAssoc, NULL, 0);
cnmMemFree(prAdapter, prStaRecManualAssoc);
return rWlanStatus;
}
typedef struct _TXBF_CMD_DONE_HANDLER_T {
UINT_32 u4TxBfCmdId;
VOID (*pFunc)(P_ADAPTER_T, P_CMD_INFO_T, PUINT_8);
} TXBF_CMD_DONE_HANDLER_T, *P_TXBF_CMD_DONE_HANDLER_T;
TXBF_CMD_DONE_HANDLER_T rTxBfCmdDoneHandler[] = {
{BF_SOUNDING_OFF, nicCmdEventSetCommon},
{BF_SOUNDING_ON, nicCmdEventSetCommon},
{BF_HW_CTRL, nicCmdEventSetCommon},
{BF_DATA_PACKET_APPLY, nicCmdEventSetCommon},
{BF_PFMU_MEM_ALLOCATE, nicCmdEventSetCommon},
{BF_PFMU_MEM_RELEASE, nicCmdEventSetCommon},
{BF_PFMU_TAG_READ, nicCmdEventPfmuTagRead},
{BF_PFMU_TAG_WRITE, nicCmdEventSetCommon},
{BF_PROFILE_READ, nicCmdEventPfmuDataRead},
{BF_PROFILE_WRITE, nicCmdEventSetCommon},
{BF_PN_READ, nicCmdEventSetCommon},
{BF_PN_WRITE, nicCmdEventSetCommon},
{BF_PFMU_MEM_ALLOC_MAP_READ, nicCmdEventSetCommon}
};
WLAN_STATUS
wlanoidTxBfAction(IN P_ADAPTER_T prAdapter, IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
P_PARAM_CUSTOM_TXBF_ACTION_STRUCT_T prTxBfActionInfo;
CMD_TXBF_ACTION_T rCmdTxBfActionInfo;
WLAN_STATUS rWlanStatus = WLAN_STATUS_SUCCESS;
BOOLEAN fgSetQuery, fgNeedResp;
UINT_32 u4TxBfCmdId;
DEBUGFUNC("wlanoidTxBfAction");
ASSERT(prAdapter);
ASSERT(pu4SetInfoLen);
*pu4SetInfoLen = sizeof(PARAM_CUSTOM_TXBF_ACTION_STRUCT_T);
if (u4SetBufferLen < sizeof(PARAM_CUSTOM_TXBF_ACTION_STRUCT_T))
return WLAN_STATUS_INVALID_LENGTH;
ASSERT(pvSetBuffer);
prTxBfActionInfo = (P_PARAM_CUSTOM_TXBF_ACTION_STRUCT_T) pvSetBuffer;
memcpy(&rCmdTxBfActionInfo, prTxBfActionInfo, sizeof(CMD_TXBF_ACTION_T));
u4TxBfCmdId = rCmdTxBfActionInfo.rProfileTagRead.ucTxBfCategory;
if (TXBF_CMD_NEED_TO_RESPONSE(u4TxBfCmdId) == 0) { /* don't need response */
fgSetQuery = TRUE;
fgNeedResp = FALSE;
} else {
fgSetQuery = FALSE;
fgNeedResp = TRUE;
}
rWlanStatus = wlanSendSetQueryExtCmd(prAdapter,
CMD_ID_LAYER_0_EXT_MAGIC_NUM,
EXT_CMD_ID_BF_ACTION,
fgSetQuery,
fgNeedResp,
TRUE,
rTxBfCmdDoneHandler[u4TxBfCmdId].pFunc,
nicOidCmdTimeoutCommon,
sizeof(CMD_TXBF_ACTION_T),
(PUINT_8) &rCmdTxBfActionInfo, pvSetBuffer, u4SetBufferLen);
return rWlanStatus;
}
#if CFG_SUPPORT_MU_MIMO
WLAN_STATUS
wlanoidMuMimoAction(IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
P_PARAM_CUSTOM_MUMIMO_ACTION_STRUCT_T prMuMimoActionInfo;
CMD_MUMIMO_ACTION_T rCmdMuMimoActionInfo;
WLAN_STATUS rWlanStatus = WLAN_STATUS_SUCCESS;
BOOLEAN fgSetQuery, fgNeedResp;
UINT_32 u4MuMimoCmdId;
VOID (*pFunc)(P_ADAPTER_T, P_CMD_INFO_T, PUINT_8);
DEBUGFUNC("wlanoidMuMimoAction");
ASSERT(prAdapter);
ASSERT(pu4SetInfoLen);
*pu4SetInfoLen = sizeof(PARAM_CUSTOM_MUMIMO_ACTION_STRUCT_T);
if (u4SetBufferLen < sizeof(PARAM_CUSTOM_MUMIMO_ACTION_STRUCT_T))
return WLAN_STATUS_INVALID_LENGTH;
ASSERT(pvSetBuffer);
prMuMimoActionInfo = (P_PARAM_CUSTOM_MUMIMO_ACTION_STRUCT_T) pvSetBuffer;
memcpy(&rCmdMuMimoActionInfo, prMuMimoActionInfo, sizeof(CMD_MUMIMO_ACTION_T));
u4MuMimoCmdId = rCmdMuMimoActionInfo.ucMuMimoCategory;
if (MU_CMD_NEED_TO_RESPONSE(u4MuMimoCmdId) == 0) {
fgSetQuery = TRUE;
fgNeedResp = FALSE;
} else {
fgSetQuery = FALSE;
fgNeedResp = TRUE;
}
pFunc = nicCmdEventSetCommon;
if (u4MuMimoCmdId == MU_HQA_GET_QD)
pFunc = nicCmdEventGetQd;
else if (u4MuMimoCmdId == MU_HQA_GET_CALC_LQ)
pFunc = nicCmdEventGetCalcLq;
else if (u4MuMimoCmdId == MU_GET_CALC_INIT_MCS)
pFunc = nicCmdEventGetCalcInitMcs;
rWlanStatus = wlanSendSetQueryExtCmd(prAdapter,
CMD_ID_LAYER_0_EXT_MAGIC_NUM,
EXT_CMD_ID_MU_CTRL,
fgSetQuery,
fgNeedResp,
TRUE,
pFunc,
nicOidCmdTimeoutCommon,
sizeof(CMD_MUMIMO_ACTION_T),
(PUINT_8) &rCmdMuMimoActionInfo, pvSetBuffer, u4SetBufferLen);
return rWlanStatus;
}
#endif /* CFG_SUPPORT_MU_MIMO */
#endif /* CFG_SUPPORT_TX_BF */
#endif /* CFG_SUPPORT_QA_TOOL */
#if CFG_SUPPORT_CAL_RESULT_BACKUP_TO_HOST
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to Trigger FW Cal for Backup Cal Data to Host Side.
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[in] pvSetBuffer A pointer to the buffer that holds the data to be set.
* \param[in] u4SetBufferLen The length of the set buffer.
* \param[out] pu4SetInfoLen If the call is successful, returns the number of
* bytes read from the set buffer. If the call failed
* due to invalid length of the set buffer, returns
* the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_INVALID_LENGTH
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidSetCalBackup(IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
WLAN_STATUS rWlanStatus = WLAN_STATUS_SUCCESS;
P_PARAM_CAL_BACKUP_STRUCT_V2_T prCalBackupDataV2Info;
DBGLOG(RFTEST, INFO, "%s\n", __func__);
ASSERT(prAdapter);
ASSERT(pu4SetInfoLen);
*pu4SetInfoLen = sizeof(PARAM_CAL_BACKUP_STRUCT_V2_T);
if (u4SetBufferLen < sizeof(PARAM_CAL_BACKUP_STRUCT_V2_T))
return WLAN_STATUS_INVALID_LENGTH;
ASSERT(pvSetBuffer);
prCalBackupDataV2Info = (P_PARAM_CAL_BACKUP_STRUCT_V2_T) pvSetBuffer;
if (prCalBackupDataV2Info->ucReason == 1 && prCalBackupDataV2Info->ucAction == 2) {
/* Trigger All Cal Function */
return wlanoidSendCalBackupV2Cmd(prAdapter, pvSetBuffer, u4SetBufferLen);
} else if (prCalBackupDataV2Info->ucReason == 4 && prCalBackupDataV2Info->ucAction == 6) {
/* For Debug Use, Tell FW Print Cal Data (Rom or Ram) */
return wlanoidSendCalBackupV2Cmd(prAdapter, pvSetBuffer, u4SetBufferLen);
} else if (prCalBackupDataV2Info->ucReason == 3 && prCalBackupDataV2Info->ucAction == 5) {
/* Send Cal Data to FW */
if (prCalBackupDataV2Info->ucRomRam == 0)
prCalBackupDataV2Info->u4RemainLength = g_rBackupCalDataAllV2.u4ValidRomCalDataLength;
else if (prCalBackupDataV2Info->ucRomRam == 1)
prCalBackupDataV2Info->u4RemainLength = g_rBackupCalDataAllV2.u4ValidRamCalDataLength;
return wlanoidSendCalBackupV2Cmd(prAdapter, pvSetBuffer, u4SetBufferLen);
}
return rWlanStatus;
}
WLAN_STATUS wlanoidSendCalBackupV2Cmd(IN P_ADAPTER_T prAdapter, IN PVOID pvQueryBuffer, IN UINT_32 u4QueryBufferLen)
{
WLAN_STATUS rWlanStatus = WLAN_STATUS_SUCCESS;
P_PARAM_CAL_BACKUP_STRUCT_V2_T prCalBackupDataV2Info;
P_CMD_CAL_BACKUP_STRUCT_V2_T prCmdCalBackupDataV2;
UINT_8 ucReason, ucAction, ucNeedResp, ucFragNum, ucRomRam;
UINT_32 u4DumpMaxSize = PARAM_CAL_DATA_DUMP_MAX_SIZE;
UINT_32 u4RemainLength, u4CurrAddr, u4CurrLen;
DBGLOG(RFTEST, INFO, "%s\n", __func__);
prCmdCalBackupDataV2 =
(P_CMD_CAL_BACKUP_STRUCT_V2_T) kalMemAlloc(sizeof(CMD_CAL_BACKUP_STRUCT_V2_T), VIR_MEM_TYPE);
prCalBackupDataV2Info = (P_PARAM_CAL_BACKUP_STRUCT_V2_T) pvQueryBuffer;
ucReason = prCalBackupDataV2Info->ucReason;
ucAction = prCalBackupDataV2Info->ucAction;
ucNeedResp = prCalBackupDataV2Info->ucNeedResp;
ucRomRam = prCalBackupDataV2Info->ucRomRam;
if (ucAction == 2) {
/* Trigger All Cal Function */
prCmdCalBackupDataV2->ucReason = ucReason;
prCmdCalBackupDataV2->ucAction = ucAction;
prCmdCalBackupDataV2->ucNeedResp = ucNeedResp;
prCmdCalBackupDataV2->ucFragNum = prCalBackupDataV2Info->ucFragNum;
prCmdCalBackupDataV2->ucRomRam = ucRomRam;
prCmdCalBackupDataV2->u4ThermalValue = prCalBackupDataV2Info->u4ThermalValue;
prCmdCalBackupDataV2->u4Address = prCalBackupDataV2Info->u4Address;
prCmdCalBackupDataV2->u4Length = prCalBackupDataV2Info->u4Length;
prCmdCalBackupDataV2->u4RemainLength = prCalBackupDataV2Info->u4RemainLength;
#if CFG_SUPPORT_CAL_RESULT_BACKUP_TO_HOST_DBGLOG
DBGLOG(RFTEST, INFO, "=========== Driver Send Query CMD#0 or CMD#1 (Info) ===========\n");
DBGLOG(RFTEST, INFO, "Reason = %d\n", prCmdCalBackupDataV2->ucReason);
DBGLOG(RFTEST, INFO, "Action = %d\n", prCmdCalBackupDataV2->ucAction);
DBGLOG(RFTEST, INFO, "NeedResp = %d\n", prCmdCalBackupDataV2->ucNeedResp);
DBGLOG(RFTEST, INFO, "FragNum = %d\n", prCmdCalBackupDataV2->ucFragNum);
DBGLOG(RFTEST, INFO, "RomRam = %d\n", prCmdCalBackupDataV2->ucRomRam);
DBGLOG(RFTEST, INFO, "ThermalValue = %d\n", prCmdCalBackupDataV2->u4ThermalValue);
DBGLOG(RFTEST, INFO, "Address = 0x%08x\n", prCmdCalBackupDataV2->u4Address);
DBGLOG(RFTEST, INFO, "Length = %d\n", prCmdCalBackupDataV2->u4Length);
DBGLOG(RFTEST, INFO, "RemainLength = %d\n", prCmdCalBackupDataV2->u4RemainLength);
DBGLOG(RFTEST, INFO, "================================================================\n");
#endif
rWlanStatus = wlanSendSetQueryCmd(prAdapter,
CMD_ID_CAL_BACKUP_IN_HOST_V2,
TRUE,
FALSE,
TRUE,
nicCmdEventSetCommon,
NULL,
sizeof(CMD_CAL_BACKUP_STRUCT_V2_T),
(PUINT_8) prCmdCalBackupDataV2, pvQueryBuffer, u4QueryBufferLen);
kalMemFree(prCmdCalBackupDataV2, VIR_MEM_TYPE, sizeof(CMD_CAL_BACKUP_STRUCT_V2_T));
} else if (ucAction == 0 || ucAction == 1 || ucAction == 6) {
/* Query CMD#0 and CMD#1. */
/* For Thermal Value and Total Cal Data Length. */
prCmdCalBackupDataV2->ucReason = ucReason;
prCmdCalBackupDataV2->ucAction = ucAction;
prCmdCalBackupDataV2->ucNeedResp = ucNeedResp;
prCmdCalBackupDataV2->ucFragNum = prCalBackupDataV2Info->ucFragNum;
prCmdCalBackupDataV2->ucRomRam = ucRomRam;
prCmdCalBackupDataV2->u4ThermalValue = prCalBackupDataV2Info->u4ThermalValue;
prCmdCalBackupDataV2->u4Address = prCalBackupDataV2Info->u4Address;
prCmdCalBackupDataV2->u4Length = prCalBackupDataV2Info->u4Length;
prCmdCalBackupDataV2->u4RemainLength = prCalBackupDataV2Info->u4RemainLength;
#if CFG_SUPPORT_CAL_RESULT_BACKUP_TO_HOST_DBGLOG
DBGLOG(RFTEST, INFO, "=========== Driver Send Query CMD#0 or CMD#1 (Info) ===========\n");
DBGLOG(RFTEST, INFO, "Reason = %d\n", prCmdCalBackupDataV2->ucReason);
DBGLOG(RFTEST, INFO, "Action = %d\n", prCmdCalBackupDataV2->ucAction);
DBGLOG(RFTEST, INFO, "NeedResp = %d\n", prCmdCalBackupDataV2->ucNeedResp);
DBGLOG(RFTEST, INFO, "FragNum = %d\n", prCmdCalBackupDataV2->ucFragNum);
DBGLOG(RFTEST, INFO, "RomRam = %d\n", prCmdCalBackupDataV2->ucRomRam);
DBGLOG(RFTEST, INFO, "ThermalValue = %d\n", prCmdCalBackupDataV2->u4ThermalValue);
DBGLOG(RFTEST, INFO, "Address = 0x%08x\n", prCmdCalBackupDataV2->u4Address);
DBGLOG(RFTEST, INFO, "Length = %d\n", prCmdCalBackupDataV2->u4Length);
DBGLOG(RFTEST, INFO, "RemainLength = %d\n", prCmdCalBackupDataV2->u4RemainLength);
DBGLOG(RFTEST, INFO, "================================================================\n");
#endif
rWlanStatus = wlanSendSetQueryCmd(prAdapter,
CMD_ID_CAL_BACKUP_IN_HOST_V2,
FALSE,
TRUE,
FALSE,
nicCmdEventQueryCalBackupV2,
NULL,
sizeof(CMD_CAL_BACKUP_STRUCT_V2_T),
(PUINT_8) prCmdCalBackupDataV2, pvQueryBuffer, u4QueryBufferLen);
kalMemFree(prCmdCalBackupDataV2, VIR_MEM_TYPE, sizeof(CMD_CAL_BACKUP_STRUCT_V2_T));
} else if (ucAction == 4) {
/* Query All Cal Data from FW (Rom or Ram). */
u4RemainLength = prCalBackupDataV2Info->u4RemainLength;
u4CurrAddr = prCalBackupDataV2Info->u4Address + prCalBackupDataV2Info->u4Length;
ucFragNum = prCalBackupDataV2Info->ucFragNum + 1;
if (u4RemainLength > u4DumpMaxSize) {
u4CurrLen = u4DumpMaxSize;
u4RemainLength -= u4DumpMaxSize;
} else {
u4CurrLen = u4RemainLength;
u4RemainLength = 0;
}
prCmdCalBackupDataV2->ucReason = ucReason;
prCmdCalBackupDataV2->ucAction = ucAction;
prCmdCalBackupDataV2->ucNeedResp = ucNeedResp;
prCmdCalBackupDataV2->ucFragNum = ucFragNum;
prCmdCalBackupDataV2->ucRomRam = ucRomRam;
prCmdCalBackupDataV2->u4ThermalValue = prCalBackupDataV2Info->u4ThermalValue;
prCmdCalBackupDataV2->u4Address = u4CurrAddr;
prCmdCalBackupDataV2->u4Length = u4CurrLen;
prCmdCalBackupDataV2->u4RemainLength = u4RemainLength;
#if CFG_SUPPORT_CAL_RESULT_BACKUP_TO_HOST_DBGLOG
DBGLOG(RFTEST, INFO, "========= Driver Send Query All Cal Data from FW (Info) =========\n");
DBGLOG(RFTEST, INFO, "Reason = %d\n", prCmdCalBackupDataV2->ucReason);
DBGLOG(RFTEST, INFO, "Action = %d\n", prCmdCalBackupDataV2->ucAction);
DBGLOG(RFTEST, INFO, "NeedResp = %d\n", prCmdCalBackupDataV2->ucNeedResp);
DBGLOG(RFTEST, INFO, "FragNum = %d\n", prCmdCalBackupDataV2->ucFragNum);
DBGLOG(RFTEST, INFO, "RomRam = %d\n", prCmdCalBackupDataV2->ucRomRam);
DBGLOG(RFTEST, INFO, "ThermalValue = %d\n", prCmdCalBackupDataV2->u4ThermalValue);
DBGLOG(RFTEST, INFO, "Address = 0x%08x\n", prCmdCalBackupDataV2->u4Address);
DBGLOG(RFTEST, INFO, "Length = %d\n", prCmdCalBackupDataV2->u4Length);
DBGLOG(RFTEST, INFO, "RemainLength = %d\n", prCmdCalBackupDataV2->u4RemainLength);
DBGLOG(RFTEST, INFO, "=================================================================\n");
#endif
rWlanStatus = wlanSendSetQueryCmd(prAdapter,
CMD_ID_CAL_BACKUP_IN_HOST_V2,
FALSE,
TRUE,
FALSE,
nicCmdEventQueryCalBackupV2,
NULL,
sizeof(CMD_CAL_BACKUP_STRUCT_V2_T),
(PUINT_8) prCmdCalBackupDataV2, pvQueryBuffer, u4QueryBufferLen);
kalMemFree(prCmdCalBackupDataV2, VIR_MEM_TYPE, sizeof(CMD_CAL_BACKUP_STRUCT_V2_T));
} else if (ucAction == 5) {
/* Send All Cal Data to FW (Rom or Ram). */
u4RemainLength = prCalBackupDataV2Info->u4RemainLength;
u4CurrAddr = prCalBackupDataV2Info->u4Address + prCalBackupDataV2Info->u4Length;
ucFragNum = prCalBackupDataV2Info->ucFragNum + 1;
if (u4RemainLength > u4DumpMaxSize) {
u4CurrLen = u4DumpMaxSize;
u4RemainLength -= u4DumpMaxSize;
} else {
u4CurrLen = u4RemainLength;
u4RemainLength = 0;
}
prCmdCalBackupDataV2->ucReason = ucReason;
prCmdCalBackupDataV2->ucAction = ucAction;
prCmdCalBackupDataV2->ucNeedResp = ucNeedResp;
prCmdCalBackupDataV2->ucFragNum = ucFragNum;
prCmdCalBackupDataV2->ucRomRam = ucRomRam;
prCmdCalBackupDataV2->u4ThermalValue = prCalBackupDataV2Info->u4ThermalValue;
prCmdCalBackupDataV2->u4Address = u4CurrAddr;
prCmdCalBackupDataV2->u4Length = u4CurrLen;
prCmdCalBackupDataV2->u4RemainLength = u4RemainLength;
#if CFG_SUPPORT_CAL_RESULT_BACKUP_TO_HOST_DBGLOG
DBGLOG(RFTEST, INFO, "========= Driver Send All Cal Data to FW (Info) =========\n");
DBGLOG(RFTEST, INFO, "Reason = %d\n", prCmdCalBackupDataV2->ucReason);
DBGLOG(RFTEST, INFO, "Action = %d\n", prCmdCalBackupDataV2->ucAction);
DBGLOG(RFTEST, INFO, "NeedResp = %d\n", prCmdCalBackupDataV2->ucNeedResp);
DBGLOG(RFTEST, INFO, "FragNum = %d\n", prCmdCalBackupDataV2->ucFragNum);
DBGLOG(RFTEST, INFO, "RomRam = %d\n", prCmdCalBackupDataV2->ucRomRam);
DBGLOG(RFTEST, INFO, "ThermalValue = %d\n", prCmdCalBackupDataV2->u4ThermalValue);
DBGLOG(RFTEST, INFO, "Address = 0x%08x\n", prCmdCalBackupDataV2->u4Address);
DBGLOG(RFTEST, INFO, "Length = %d\n", prCmdCalBackupDataV2->u4Length);
DBGLOG(RFTEST, INFO, "RemainLength = %d\n", prCmdCalBackupDataV2->u4RemainLength);
#endif
/* Copy Cal Data From Driver to FW */
if (prCmdCalBackupDataV2->ucRomRam == 0)
kalMemCopy((PUINT_8)(prCmdCalBackupDataV2->au4Buffer),
(PUINT_8)(g_rBackupCalDataAllV2.au4RomCalData) + prCmdCalBackupDataV2->u4Address,
prCmdCalBackupDataV2->u4Length);
else if (prCmdCalBackupDataV2->ucRomRam == 1)
kalMemCopy((PUINT_8)(prCmdCalBackupDataV2->au4Buffer),
(PUINT_8)(g_rBackupCalDataAllV2.au4RamCalData) + prCmdCalBackupDataV2->u4Address,
prCmdCalBackupDataV2->u4Length);
#if CFG_SUPPORT_CAL_RESULT_BACKUP_TO_HOST_DBGLOG
DBGLOG(RFTEST, INFO, "Check some of elements (0x%08x), (0x%08x), (0x%08x), (0x%08x), (0x%08x)\n",
prCmdCalBackupDataV2->au4Buffer[0], prCmdCalBackupDataV2->au4Buffer[1],
prCmdCalBackupDataV2->au4Buffer[2], prCmdCalBackupDataV2->au4Buffer[3],
prCmdCalBackupDataV2->au4Buffer[4]);
DBGLOG(RFTEST, INFO, "Check some of elements (0x%08x), (0x%08x), (0x%08x), (0x%08x), (0x%08x)\n",
prCmdCalBackupDataV2->au4Buffer[(prCmdCalBackupDataV2->u4Length/sizeof(UINT_32)) - 5],
prCmdCalBackupDataV2->au4Buffer[(prCmdCalBackupDataV2->u4Length/sizeof(UINT_32)) - 4],
prCmdCalBackupDataV2->au4Buffer[(prCmdCalBackupDataV2->u4Length/sizeof(UINT_32)) - 3],
prCmdCalBackupDataV2->au4Buffer[(prCmdCalBackupDataV2->u4Length/sizeof(UINT_32)) - 2],
prCmdCalBackupDataV2->au4Buffer[(prCmdCalBackupDataV2->u4Length/sizeof(UINT_32)) - 1]);
DBGLOG(RFTEST, INFO, "=================================================================\n");
#endif
rWlanStatus = wlanSendSetQueryCmd(prAdapter,
CMD_ID_CAL_BACKUP_IN_HOST_V2,
FALSE,
TRUE,
FALSE,
nicCmdEventQueryCalBackupV2,
NULL,
sizeof(CMD_CAL_BACKUP_STRUCT_V2_T),
(PUINT_8) prCmdCalBackupDataV2, pvQueryBuffer, u4QueryBufferLen);
kalMemFree(prCmdCalBackupDataV2, VIR_MEM_TYPE, sizeof(CMD_CAL_BACKUP_STRUCT_V2_T));
}
return rWlanStatus;
}
WLAN_STATUS
wlanoidQueryCalBackupV2(IN P_ADAPTER_T prAdapter,
IN PVOID pvQueryBuffer, IN UINT_32 u4QueryBufferLen, OUT PUINT_32 pu4QueryInfoLen)
{
WLAN_STATUS rWlanStatus = WLAN_STATUS_SUCCESS;
P_PARAM_CAL_BACKUP_STRUCT_V2_T prCalBackupDataV2Info;
DBGLOG(RFTEST, INFO, "%s\n", __func__);
ASSERT(prAdapter);
ASSERT(pu4QueryInfoLen);
if (u4QueryBufferLen)
ASSERT(pvQueryBuffer);
*pu4QueryInfoLen = sizeof(CMD_CAL_BACKUP_STRUCT_V2_T);
prCalBackupDataV2Info = (P_PARAM_CAL_BACKUP_STRUCT_V2_T) pvQueryBuffer;
if (prCalBackupDataV2Info->ucReason == 0 && prCalBackupDataV2Info->ucAction == 0) {
/* Get Thermal Temp from FW */
return wlanoidSendCalBackupV2Cmd(prAdapter, pvQueryBuffer, u4QueryBufferLen);
} else if (prCalBackupDataV2Info->ucReason == 0 && prCalBackupDataV2Info->ucAction == 1) {
/* Get Cal Data Size from FW */
return wlanoidSendCalBackupV2Cmd(prAdapter, pvQueryBuffer, u4QueryBufferLen);
} else if (prCalBackupDataV2Info->ucReason == 2 && prCalBackupDataV2Info->ucAction == 4) {
/* Get Cal Data from FW */
if (prCalBackupDataV2Info->ucRomRam == 0)
prCalBackupDataV2Info->u4RemainLength = g_rBackupCalDataAllV2.u4ValidRomCalDataLength;
else if (prCalBackupDataV2Info->ucRomRam == 1)
prCalBackupDataV2Info->u4RemainLength = g_rBackupCalDataAllV2.u4ValidRamCalDataLength;
return wlanoidSendCalBackupV2Cmd(prAdapter, pvQueryBuffer, u4QueryBufferLen);
} else {
return rWlanStatus;
}
}
#endif
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to do Coex Isolation Detection.
* \param[in] pvAdapter Pointer to the Adapter structure.
* \param[out] pvQueryBuf A pointer to the buffer that holds the result of
* the query.
* \param[in] u4QueryBufLen The length of the query buffer.
* \param[out] pu4QueryInfoLen If the call is successful, returns the number of
* bytes written into the query buffer. If the call
* failed due to invalid length of the query buffer,
* returns the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS* \retval WLAN_STATUS_INVALID_LENGTH
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidQueryCoexIso(IN P_ADAPTER_T prAdapter,
IN PVOID pvQueryBuffer, IN UINT_32 u4QueryBufferLen, OUT PUINT_32 pu4QueryInfoLen)
{
struct PARAM_COEX_CTRL *prParaCoexCtrl;
struct PARAM_COEX_ISO_DETECT *prParaCoexIsoDetect;
struct CMD_COEX_CTRL rCmdCoexCtrl;
struct CMD_COEX_ISO_DETECT rCmdCoexIsoDetect;
DBGLOG(INIT, LOUD, "\n");
ASSERT(prAdapter);
ASSERT(pu4QueryInfoLen);
if (u4QueryBufferLen)
ASSERT(pvQueryBuffer);
*pu4QueryInfoLen = sizeof(struct PARAM_COEX_CTRL);
if (u4QueryBufferLen < sizeof(struct PARAM_COEX_CTRL))
return WLAN_STATUS_INVALID_LENGTH;
prParaCoexCtrl = (struct PARAM_COEX_CTRL *) pvQueryBuffer;
prParaCoexIsoDetect = (struct PARAM_COEX_ISO_DETECT *) &prParaCoexCtrl->aucBuffer[0];
rCmdCoexIsoDetect.u4Channel = prParaCoexIsoDetect->u4Channel;
/*rCmdCoexIsoDetect.u4Band = prParaCoexIsoDetect->u4Band;*/
rCmdCoexIsoDetect.u4IsoPath = prParaCoexIsoDetect->u4IsoPath;
rCmdCoexIsoDetect.u4Isolation = prParaCoexIsoDetect->u4Isolation;
rCmdCoexCtrl.u4SubCmd = prParaCoexCtrl->u4SubCmd;
/* Copy Memory */
kalMemCopy(rCmdCoexCtrl.aucBuffer, &rCmdCoexIsoDetect, sizeof(rCmdCoexIsoDetect));
return wlanSendSetQueryCmd(prAdapter,
CMD_ID_COEX_CTRL,
FALSE,
TRUE,
TRUE,
nicCmdEventQueryCoexIso,
nicOidCmdTimeoutCommon,
sizeof(struct CMD_COEX_CTRL),
(unsigned char *) &rCmdCoexCtrl,
pvQueryBuffer,
u4QueryBufferLen);
}
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to get coex information.
* \param[in] pvAdapter Pointer to the Adapter structure.
* \param[out] pvQueryBuf A pointer to the buffer that holds the result of
* the query.
* \param[in] u4QueryBufLen The length of the query buffer.
* \param[out] pu4QueryInfoLen If the call is successful, returns the number of
* bytes written into the query buffer. If the call
* failed due to invalid length of the query buffer,
* returns the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS* \retval WLAN_STATUS_INVALID_LENGTH
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidQueryCoexGetInfo(IN P_ADAPTER_T prAdapter,
IN PVOID pvQueryBuffer, IN UINT_32 u4QueryBufferLen, OUT PUINT_32 pu4QueryInfoLen)
{
struct PARAM_COEX_CTRL *prParaCoexCtrl;
struct PARAM_COEX_GET_INFO *prParaCoexGetInfo;
struct CMD_COEX_CTRL rCmdCoexCtrl;
struct CMD_COEX_GET_INFO rCmdCoexGetInfo;
DBGLOG(INIT, LOUD, "\n");
ASSERT(prAdapter);
ASSERT(pu4QueryInfoLen);
if (u4QueryBufferLen)
ASSERT(pvQueryBuffer);
*pu4QueryInfoLen = sizeof(struct PARAM_COEX_CTRL);
if (u4QueryBufferLen < sizeof(struct PARAM_COEX_CTRL))
return WLAN_STATUS_INVALID_LENGTH;
prParaCoexCtrl = (struct PARAM_COEX_CTRL *) pvQueryBuffer;
prParaCoexGetInfo = (struct PARAM_COEX_GET_INFO *) &prParaCoexCtrl->aucBuffer[0];
kalMemZero(rCmdCoexGetInfo.u4CoexInfo, sizeof(rCmdCoexGetInfo.u4CoexInfo));
rCmdCoexCtrl.u4SubCmd = prParaCoexCtrl->u4SubCmd;
/* Copy Memory */
kalMemCopy(rCmdCoexCtrl.aucBuffer, &rCmdCoexGetInfo, sizeof(rCmdCoexGetInfo));
DBGLOG(REQ, INFO, "wlanoidQueryCoexGetInfo end\n");
return wlanSendSetQueryCmd(prAdapter,
CMD_ID_COEX_CTRL,
FALSE,
TRUE,
TRUE,
nicCmdEventQueryCoexGetInfo,
nicOidCmdTimeoutCommon,
sizeof(struct CMD_COEX_CTRL),
(unsigned char *) &rCmdCoexCtrl,
pvQueryBuffer,
u4QueryBufferLen);
}
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to query MCR value.
*
* \param[in] pvAdapter Pointer to the Adapter structure.
* \param[out] pvQueryBuf A pointer to the buffer that holds the result of
* the query.
* \param[in] u4QueryBufLen The length of the query buffer.
* \param[out] pu4QueryInfoLen If the call is successful, returns the number of
* bytes written into the query buffer. If the call
* failed due to invalid length of the query buffer,
* returns the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_INVALID_LENGTH
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidQueryMcrRead(IN P_ADAPTER_T prAdapter,
IN PVOID pvQueryBuffer, IN UINT_32 u4QueryBufferLen, OUT PUINT_32 pu4QueryInfoLen)
{
P_PARAM_CUSTOM_MCR_RW_STRUCT_T prMcrRdInfo;
CMD_ACCESS_REG rCmdAccessReg;
DEBUGFUNC("wlanoidQueryMcrRead");
DBGLOG(INIT, LOUD, "\n");
ASSERT(prAdapter);
ASSERT(pu4QueryInfoLen);
if (u4QueryBufferLen)
ASSERT(pvQueryBuffer);
*pu4QueryInfoLen = sizeof(PARAM_CUSTOM_MCR_RW_STRUCT_T);
if (u4QueryBufferLen < sizeof(PARAM_CUSTOM_MCR_RW_STRUCT_T))
return WLAN_STATUS_INVALID_LENGTH;
prMcrRdInfo = (P_PARAM_CUSTOM_MCR_RW_STRUCT_T) pvQueryBuffer;
/* 0x9000 - 0x9EFF reserved for FW */
#if CFG_SUPPORT_SWCR
if ((prMcrRdInfo->u4McrOffset >> 16) == 0x9F00) {
swCrReadWriteCmd(prAdapter,
SWCR_READ,
(UINT_16) (prMcrRdInfo->u4McrOffset & BITS(0, 15)), &prMcrRdInfo->u4McrData);
return WLAN_STATUS_SUCCESS;
}
#endif /* CFG_SUPPORT_SWCR */
/* Check if access F/W Domain MCR (due to WiFiSYS is placed from 0x6000-0000 */
if (prMcrRdInfo->u4McrOffset & 0xFFFF0000) {
/* fill command */
rCmdAccessReg.u4Address = prMcrRdInfo->u4McrOffset;
rCmdAccessReg.u4Data = 0;
return wlanSendSetQueryCmd(prAdapter,
CMD_ID_ACCESS_REG,
FALSE,
TRUE,
TRUE,
nicCmdEventQueryMcrRead,
nicOidCmdTimeoutCommon,
sizeof(CMD_ACCESS_REG),
(PUINT_8) &rCmdAccessReg, pvQueryBuffer, u4QueryBufferLen);
} else {
HAL_MCR_RD(prAdapter, (prMcrRdInfo->u4McrOffset & BITS(2, 31)), /* address is in DWORD unit */
&prMcrRdInfo->u4McrData);
DBGLOG(INIT, TRACE, "MCR Read: Offset = %#08lx, Data = %#08lx\n",
prMcrRdInfo->u4McrOffset, prMcrRdInfo->u4McrData);
return WLAN_STATUS_SUCCESS;
}
} /* end of wlanoidQueryMcrRead() */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to write MCR and enable specific function.
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[in] pvSetBuffer A pointer to the buffer that holds the data to be set.
* \param[in] u4SetBufferLen The length of the set buffer.
* \param[out] pu4SetInfoLen If the call is successful, returns the number of
* bytes read from the set buffer. If the call failed
* due to invalid length of the set buffer, returns
* the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_INVALID_LENGTH
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidSetMcrWrite(IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
P_PARAM_CUSTOM_MCR_RW_STRUCT_T prMcrWrInfo;
CMD_ACCESS_REG rCmdAccessReg;
#if CFG_STRESS_TEST_SUPPORT
P_AIS_FSM_INFO_T prAisFsmInfo;
P_BSS_INFO_T prBssInfo = prAdapter->prAisBssInfo;
P_STA_RECORD_T prStaRec = prBssInfo->prStaRecOfAP;
UINT_32 u4McrOffset, u4McrData;
#endif
DEBUGFUNC("wlanoidSetMcrWrite");
DBGLOG(INIT, LOUD, "\n");
ASSERT(prAdapter);
ASSERT(pu4SetInfoLen);
*pu4SetInfoLen = sizeof(PARAM_CUSTOM_MCR_RW_STRUCT_T);
if (u4SetBufferLen < sizeof(PARAM_CUSTOM_MCR_RW_STRUCT_T))
return WLAN_STATUS_INVALID_LENGTH;
ASSERT(pvSetBuffer);
prMcrWrInfo = (P_PARAM_CUSTOM_MCR_RW_STRUCT_T) pvSetBuffer;
/* 0x9000 - 0x9EFF reserved for FW */
/* 0xFFFE reserved for FW */
/* -- Puff Stress Test Begin */
#if CFG_STRESS_TEST_SUPPORT
/* 0xFFFFFFFE for Control Rate */
if (prMcrWrInfo->u4McrOffset == 0xFFFFFFFE) {
if (prMcrWrInfo->u4McrData < FIXED_RATE_NUM && prMcrWrInfo->u4McrData > 0)
prAdapter->rWifiVar.eRateSetting = (ENUM_REGISTRY_FIXED_RATE_T) (prMcrWrInfo->u4McrData);
cnmStaRecChangeState(prAdapter, prStaRec, STA_STATE_1);
cnmStaRecChangeState(prAdapter, prStaRec, STA_STATE_3);
DEBUGFUNC("[Stress Test]Complete Rate is Changed...\n");
DBGLOG(INIT, TRACE, "[Stress Test] Rate is Changed to index %d...\n", prAdapter->rWifiVar.eRateSetting);
}
/* 0xFFFFFFFD for Switch Channel */
else if (prMcrWrInfo->u4McrOffset == 0xFFFFFFFD) {
if (prMcrWrInfo->u4McrData <= 11 && prMcrWrInfo->u4McrData >= 1)
prBssInfo->ucPrimaryChannel = prMcrWrInfo->u4McrData;
nicUpdateBss(prAdapter, prBssInfo->ucNetTypeIndex);
DBGLOG(INIT, TRACE, "[Stress Test] Channel is switched to %d ...\n", prBssInfo->ucPrimaryChannel);
return WLAN_STATUS_SUCCESS;
}
/* 0xFFFFFFFFC for Control RF Band and SCO */
else if (prMcrWrInfo->u4McrOffset == 0xFFFFFFFC) {
/* Band */
if (prMcrWrInfo->u4McrData & 0x80000000) {
/* prBssInfo->eBand = BAND_5G; */
/* prBssInfo->ucPrimaryChannel = 52; // Bond to Channel 52 */
} else {
prBssInfo->eBand = BAND_2G4;
prBssInfo->ucPrimaryChannel = 8; /* Bond to Channel 6 */
}
/* Bandwidth */
if (prMcrWrInfo->u4McrData & 0x00010000) {
prStaRec->u2HtCapInfo |= HT_CAP_INFO_SUP_CHNL_WIDTH;
prStaRec->ucDesiredPhyTypeSet = PHY_TYPE_BIT_HT;
if (prMcrWrInfo->u4McrData == 0x00010002) {
prBssInfo->eBssSCO = CHNL_EXT_SCB; /* U20 */
prBssInfo->ucPrimaryChannel += 2;
} else if (prMcrWrInfo->u4McrData == 0x00010001) {
prBssInfo->eBssSCO = CHNL_EXT_SCA; /* L20 */
prBssInfo->ucPrimaryChannel -= 2;
} else {
prBssInfo->eBssSCO = CHNL_EXT_SCA; /* 40 */
}
}
rlmBssInitForAPandIbss(prAdapter, prBssInfo);
}
/* 0xFFFFFFFB for HT Capability */
else if (prMcrWrInfo->u4McrOffset == 0xFFFFFFFB) {
/* Enable HT Capability */
if (prMcrWrInfo->u4McrData & 0x00000001) {
prStaRec->u2HtCapInfo |= HT_CAP_INFO_HT_GF;
DEBUGFUNC("[Stress Test]Enable HT capability...\n");
} else {
prStaRec->u2HtCapInfo &= (~HT_CAP_INFO_HT_GF);
DEBUGFUNC("[Stress Test]Disable HT capability...\n");
}
cnmStaRecChangeState(prAdapter, prStaRec, STA_STATE_1);
cnmStaRecChangeState(prAdapter, prStaRec, STA_STATE_3);
}
/* 0xFFFFFFFA for Enable Random Rx Reset */
else if (prMcrWrInfo->u4McrOffset == 0xFFFFFFFA) {
rCmdAccessReg.u4Address = prMcrWrInfo->u4McrOffset;
rCmdAccessReg.u4Data = prMcrWrInfo->u4McrData;
return wlanSendSetQueryCmd(prAdapter,
CMD_ID_RANDOM_RX_RESET_EN,
TRUE,
FALSE,
TRUE,
nicCmdEventSetCommon,
nicOidCmdTimeoutCommon,
sizeof(CMD_ACCESS_REG),
(PUINT_8) &rCmdAccessReg, pvSetBuffer, u4SetBufferLen);
}
/* 0xFFFFFFF9 for Disable Random Rx Reset */
else if (prMcrWrInfo->u4McrOffset == 0xFFFFFFF9) {
rCmdAccessReg.u4Address = prMcrWrInfo->u4McrOffset;
rCmdAccessReg.u4Data = prMcrWrInfo->u4McrData;
return wlanSendSetQueryCmd(prAdapter,
CMD_ID_RANDOM_RX_RESET_DE,
TRUE,
FALSE,
TRUE,
nicCmdEventSetCommon,
nicOidCmdTimeoutCommon,
sizeof(CMD_ACCESS_REG),
(PUINT_8) &rCmdAccessReg, pvSetBuffer, u4SetBufferLen);
}
/* 0xFFFFFFF8 for Enable SAPP */
else if (prMcrWrInfo->u4McrOffset == 0xFFFFFFF8) {
rCmdAccessReg.u4Address = prMcrWrInfo->u4McrOffset;
rCmdAccessReg.u4Data = prMcrWrInfo->u4McrData;
return wlanSendSetQueryCmd(prAdapter,
CMD_ID_SAPP_EN,
TRUE,
FALSE,
TRUE,
nicCmdEventSetCommon,
nicOidCmdTimeoutCommon,
sizeof(CMD_ACCESS_REG),
(PUINT_8) &rCmdAccessReg, pvSetBuffer, u4SetBufferLen);
}
/* 0xFFFFFFF7 for Disable SAPP */
else if (prMcrWrInfo->u4McrOffset == 0xFFFFFFF7) {
rCmdAccessReg.u4Address = prMcrWrInfo->u4McrOffset;
rCmdAccessReg.u4Data = prMcrWrInfo->u4McrData;
return wlanSendSetQueryCmd(prAdapter,
CMD_ID_SAPP_DE,
TRUE,
FALSE,
TRUE,
nicCmdEventSetCommon,
nicOidCmdTimeoutCommon,
sizeof(CMD_ACCESS_REG),
(PUINT_8) &rCmdAccessReg, pvSetBuffer, u4SetBufferLen);
}
else
#endif
/* -- Puff Stress Test End */
/* Check if access F/W Domain MCR */
if (prMcrWrInfo->u4McrOffset & 0xFFFF0000) {
/* 0x9000 - 0x9EFF reserved for FW */
#if CFG_SUPPORT_SWCR
if ((prMcrWrInfo->u4McrOffset >> 16) == 0x9F00) {
swCrReadWriteCmd(prAdapter,
SWCR_WRITE,
(UINT_16) (prMcrWrInfo->u4McrOffset & BITS(0, 15)), &prMcrWrInfo->u4McrData);
return WLAN_STATUS_SUCCESS;
}
#endif /* CFG_SUPPORT_SWCR */
#if 1
/* low power test special command */
if (prMcrWrInfo->u4McrOffset == 0x11111110) {
WLAN_STATUS rStatus = WLAN_STATUS_SUCCESS;
/* DbgPrint("Enter test mode\n"); */
prAdapter->fgTestMode = TRUE;
return rStatus;
}
if (prMcrWrInfo->u4McrOffset == 0x11111111) {
/* DbgPrint("nicpmSetAcpiPowerD3\n"); */
nicpmSetAcpiPowerD3(prAdapter);
kalDevSetPowerState(prAdapter->prGlueInfo, (UINT_32) ParamDeviceStateD3);
return WLAN_STATUS_SUCCESS;
}
if (prMcrWrInfo->u4McrOffset == 0x11111112) {
/* DbgPrint("LP enter sleep\n"); */
/* fill command */
rCmdAccessReg.u4Address = prMcrWrInfo->u4McrOffset;
rCmdAccessReg.u4Data = prMcrWrInfo->u4McrData;
return wlanSendSetQueryCmd(prAdapter,
CMD_ID_ACCESS_REG,
TRUE,
FALSE,
TRUE,
nicCmdEventSetCommon,
nicOidCmdTimeoutCommon,
sizeof(CMD_ACCESS_REG),
(PUINT_8) &rCmdAccessReg, pvSetBuffer, u4SetBufferLen);
}
#endif
#if 1
/* low power test special command */
if (prMcrWrInfo->u4McrOffset == 0x11111110) {
WLAN_STATUS rStatus = WLAN_STATUS_SUCCESS;
/* DbgPrint("Enter test mode\n"); */
prAdapter->fgTestMode = TRUE;
return rStatus;
}
if (prMcrWrInfo->u4McrOffset == 0x11111111) {
/* DbgPrint("nicpmSetAcpiPowerD3\n"); */
nicpmSetAcpiPowerD3(prAdapter);
kalDevSetPowerState(prAdapter->prGlueInfo, (UINT_32) ParamDeviceStateD3);
return WLAN_STATUS_SUCCESS;
}
if (prMcrWrInfo->u4McrOffset == 0x11111112) {
/* DbgPrint("LP enter sleep\n"); */
/* fill command */
rCmdAccessReg.u4Address = prMcrWrInfo->u4McrOffset;
rCmdAccessReg.u4Data = prMcrWrInfo->u4McrData;
return wlanSendSetQueryCmd(prAdapter,
CMD_ID_ACCESS_REG,
TRUE,
FALSE,
TRUE,
nicCmdEventSetCommon,
nicOidCmdTimeoutCommon,
sizeof(CMD_ACCESS_REG),
(PUINT_8) &rCmdAccessReg, pvSetBuffer, u4SetBufferLen);
}
#endif
#if CFG_SUPPORT_SDIO_READ_WRITE_PATTERN
if (prMcrWrInfo->u4McrOffset == 0x22220000) {
/* read test mode */
kalSetSdioTestPattern(prAdapter->prGlueInfo, TRUE, TRUE);
return WLAN_STATUS_SUCCESS;
}
if (prMcrWrInfo->u4McrOffset == 0x22220001) {
/* write test mode */
kalSetSdioTestPattern(prAdapter->prGlueInfo, TRUE, FALSE);
return WLAN_STATUS_SUCCESS;
}
if (prMcrWrInfo->u4McrOffset == 0x22220002) {
/* leave from test mode */
kalSetSdioTestPattern(prAdapter->prGlueInfo, FALSE, FALSE);
return WLAN_STATUS_SUCCESS;
}
#endif
/* fill command */
rCmdAccessReg.u4Address = prMcrWrInfo->u4McrOffset;
rCmdAccessReg.u4Data = prMcrWrInfo->u4McrData;
return wlanSendSetQueryCmd(prAdapter,
CMD_ID_ACCESS_REG,
TRUE,
FALSE,
TRUE,
nicCmdEventSetCommon,
nicOidCmdTimeoutCommon,
sizeof(CMD_ACCESS_REG),
(PUINT_8) &rCmdAccessReg, pvSetBuffer, u4SetBufferLen);
} else {
HAL_MCR_WR(prAdapter, (prMcrWrInfo->u4McrOffset & BITS(2, 31)), /* address is in DWORD unit */
prMcrWrInfo->u4McrData);
DBGLOG(INIT, TRACE, "MCR Write: Offset = %#08lx, Data = %#08lx\n",
prMcrWrInfo->u4McrOffset, prMcrWrInfo->u4McrData);
return WLAN_STATUS_SUCCESS;
}
} /* wlanoidSetMcrWrite */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to query driver MCR value.
*
* \param[in] pvAdapter Pointer to the Adapter structure.
* \param[out] pvQueryBuf A pointer to the buffer that holds the result of
* the query.
* \param[in] u4QueryBufLen The length of the query buffer.
* \param[out] pu4QueryInfoLen If the call is successful, returns the number of
* bytes written into the query buffer. If the call
* failed due to invalid length of the query buffer,
* returns the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_INVALID_LENGTH
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidQueryDrvMcrRead(IN P_ADAPTER_T prAdapter,
IN PVOID pvQueryBuffer, IN UINT_32 u4QueryBufferLen, OUT PUINT_32 pu4QueryInfoLen)
{
P_PARAM_CUSTOM_MCR_RW_STRUCT_T prMcrRdInfo;
/* CMD_ACCESS_REG rCmdAccessReg; */
DEBUGFUNC("wlanoidQueryMcrRead");
DBGLOG(INIT, LOUD, "\n");
ASSERT(prAdapter);
ASSERT(pu4QueryInfoLen);
if (u4QueryBufferLen)
ASSERT(pvQueryBuffer);
*pu4QueryInfoLen = sizeof(PARAM_CUSTOM_MCR_RW_STRUCT_T);
if (u4QueryBufferLen < sizeof(PARAM_CUSTOM_MCR_RW_STRUCT_T))
return WLAN_STATUS_INVALID_LENGTH;
prMcrRdInfo = (P_PARAM_CUSTOM_MCR_RW_STRUCT_T) pvQueryBuffer;
ACQUIRE_POWER_CONTROL_FROM_PM(prAdapter);
HAL_MCR_RD(prAdapter, (prMcrRdInfo->u4McrOffset & BITS(2, 31)), &prMcrRdInfo->u4McrData);
DBGLOG(INIT, TRACE, "DRV MCR Read: Offset = %#08lx, Data = %#08lx\n",
prMcrRdInfo->u4McrOffset, prMcrRdInfo->u4McrData);
return WLAN_STATUS_SUCCESS;
} /* end of wlanoidQueryMcrRead() */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to write MCR and enable specific function.
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[in] pvSetBuffer A pointer to the buffer that holds the data to be set.
* \param[in] u4SetBufferLen The length of the set buffer.
* \param[out] pu4SetInfoLen If the call is successful, returns the number of
* bytes read from the set buffer. If the call failed
* due to invalid length of the set buffer, returns
* the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_INVALID_LENGTH
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidSetDrvMcrWrite(IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
P_PARAM_CUSTOM_MCR_RW_STRUCT_T prMcrWrInfo;
/* CMD_ACCESS_REG rCmdAccessReg; */
DEBUGFUNC("wlanoidSetMcrWrite");
DBGLOG(INIT, LOUD, "\n");
ASSERT(prAdapter);
ASSERT(pu4SetInfoLen);
*pu4SetInfoLen = sizeof(PARAM_CUSTOM_MCR_RW_STRUCT_T);
if (u4SetBufferLen < sizeof(PARAM_CUSTOM_MCR_RW_STRUCT_T))
return WLAN_STATUS_INVALID_LENGTH;
ASSERT(pvSetBuffer);
prMcrWrInfo = (P_PARAM_CUSTOM_MCR_RW_STRUCT_T) pvSetBuffer;
ACQUIRE_POWER_CONTROL_FROM_PM(prAdapter);
HAL_MCR_WR(prAdapter, (prMcrWrInfo->u4McrOffset & BITS(2, 31)), prMcrWrInfo->u4McrData);
DBGLOG(INIT, TRACE, "DRV MCR Write: Offset = %#08lx, Data = %#08lx\n",
prMcrWrInfo->u4McrOffset, prMcrWrInfo->u4McrData);
return WLAN_STATUS_SUCCESS;
} /* wlanoidSetMcrWrite */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to query SW CTRL
*
* \param[in] pvAdapter Pointer to the Adapter structure.
* \param[out] pvQueryBuf A pointer to the buffer that holds the result of
* the query.
* \param[in] u4QueryBufLen The length of the query buffer.
* \param[out] pu4QueryInfoLen If the call is successful, returns the number of
* bytes written into the query buffer. If the call
* failed due to invalid length of the query buffer,
* returns the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_INVALID_LENGTH
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidQuerySwCtrlRead(IN P_ADAPTER_T prAdapter,
IN PVOID pvQueryBuffer, IN UINT_32 u4QueryBufferLen, OUT PUINT_32 pu4QueryInfoLen)
{
P_PARAM_CUSTOM_SW_CTRL_STRUCT_T prSwCtrlInfo;
WLAN_STATUS rWlanStatus;
UINT_16 u2Id, u2SubId;
UINT_32 u4Data;
CMD_SW_DBG_CTRL_T rCmdSwCtrl;
DEBUGFUNC("wlanoidQuerySwCtrlRead");
DBGLOG(INIT, LOUD, "\n");
ASSERT(prAdapter);
ASSERT(pu4QueryInfoLen);
if (u4QueryBufferLen)
ASSERT(pvQueryBuffer);
*pu4QueryInfoLen = sizeof(PARAM_CUSTOM_SW_CTRL_STRUCT_T);
if (u4QueryBufferLen < sizeof(PARAM_CUSTOM_SW_CTRL_STRUCT_T))
return WLAN_STATUS_INVALID_LENGTH;
prSwCtrlInfo = (P_PARAM_CUSTOM_SW_CTRL_STRUCT_T) pvQueryBuffer;
u2Id = (UINT_16) (prSwCtrlInfo->u4Id >> 16);
u2SubId = (UINT_16) (prSwCtrlInfo->u4Id & BITS(0, 15));
u4Data = 0;
rWlanStatus = WLAN_STATUS_SUCCESS;
switch (u2Id) {
/* 0x9000 - 0x9EFF reserved for FW */
/* 0xFFFE reserved for FW */
#if CFG_SUPPORT_SWCR
case 0x9F00:
swCrReadWriteCmd(prAdapter, SWCR_READ /* Read */,
(UINT_16) u2SubId, &u4Data);
break;
#endif /* CFG_SUPPORT_SWCR */
case 0xFFFF:
{
u4Data = 0x5AA56620;
}
break;
case 0xBABA:
switch ((u2SubId >> 8) & BITS(0, 7)) {
case 0x00:
/* Dump Tx resource and queue status */
qmDumpQueueStatus(prAdapter, NULL, 0);
cnmDumpMemoryStatus(prAdapter, NULL, 0);
break;
case 0x01:
/* Dump StaRec info by index */
cnmDumpStaRec(prAdapter, (UINT_8) (u2SubId & BITS(0, 7)));
break;
case 0x02:
/* Dump BSS info by index */
bssDumpBssInfo(prAdapter, (UINT_8) (u2SubId & BITS(0, 7)));
break;
case 0x03:
/*Dump BSS statistics by index */
wlanDumpBssStatistics(prAdapter, (UINT_8) (u2SubId & BITS(0, 7)));
break;
case 0x04:
halDumpHifStatus(prAdapter, NULL, 0);
break;
default:
break;
}
u4Data = 0xBABABABA;
break;
case 0x9000:
default:
{
rCmdSwCtrl.u4Id = prSwCtrlInfo->u4Id;
rCmdSwCtrl.u4Data = 0;
rWlanStatus = wlanSendSetQueryCmd(prAdapter,
CMD_ID_SW_DBG_CTRL,
FALSE,
TRUE,
TRUE,
nicCmdEventQuerySwCtrlRead,
nicOidCmdTimeoutCommon,
sizeof(CMD_SW_DBG_CTRL_T),
(PUINT_8) &rCmdSwCtrl, pvQueryBuffer, u4QueryBufferLen);
return rWlanStatus;
}
} /* switch(u2Id) */
prSwCtrlInfo->u4Data = u4Data;
return rWlanStatus;
}
/* end of wlanoidQuerySwCtrlRead() */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to write SW CTRL
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[in] pvSetBuffer A pointer to the buffer that holds the data to be set.
* \param[in] u4SetBufferLen The length of the set buffer.
* \param[out] pu4SetInfoLen If the call is successful, returns the number of
* bytes read from the set buffer. If the call failed
* due to invalid length of the set buffer, returns
* the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_INVALID_LENGTH
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidSetSwCtrlWrite(IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
P_PARAM_CUSTOM_SW_CTRL_STRUCT_T prSwCtrlInfo;
CMD_SW_DBG_CTRL_T rCmdSwCtrl;
WLAN_STATUS rWlanStatus = WLAN_STATUS_SUCCESS;
UINT_16 u2Id, u2SubId;
UINT_32 u4Data;
UINT_8 ucNss;
UINT_8 ucChannelWidth;
UINT_8 ucBssIndex;
DEBUGFUNC("wlanoidSetSwCtrlWrite");
DBGLOG(INIT, LOUD, "\n");
ASSERT(prAdapter);
ASSERT(pu4SetInfoLen);
*pu4SetInfoLen = sizeof(PARAM_CUSTOM_SW_CTRL_STRUCT_T);
if (u4SetBufferLen < sizeof(PARAM_CUSTOM_SW_CTRL_STRUCT_T))
return WLAN_STATUS_INVALID_LENGTH;
ASSERT(pvSetBuffer);
prSwCtrlInfo = (P_PARAM_CUSTOM_SW_CTRL_STRUCT_T) pvSetBuffer;
u2Id = (UINT_16) (prSwCtrlInfo->u4Id >> 16);
u2SubId = (UINT_16) (prSwCtrlInfo->u4Id & BITS(0, 15));
u4Data = prSwCtrlInfo->u4Data;
switch (u2Id) {
/* 0x9000 - 0x9EFF reserved for FW */
/* 0xFFFE reserved for FW */
#if CFG_SUPPORT_SWCR
case 0x9F00:
swCrReadWriteCmd(prAdapter, SWCR_WRITE, (UINT_16) u2SubId, &u4Data);
break;
#endif /* CFG_SUPPORT_SWCR */
case 0x2222:
ucNss = (UINT_8)(u4Data & BITS(0, 3));
ucChannelWidth = (UINT_8)((u4Data & BITS(4, 7)) >> 4);
ucBssIndex = (UINT_8) u2SubId;
/* ucChannelWidth 0:20MHz, 1:40MHz, 2:80MHz, 3:160MHz 4:80+80MHz */
DBGLOG(REQ, INFO, "Change BSS[%d] OpMode to BW[%d] Nss[%d]\n",
ucBssIndex, ucChannelWidth, ucNss);
rlmChangeOperationMode(prAdapter, ucBssIndex, ucChannelWidth, ucNss);
break;
case 0x1000:
if (u2SubId == 0x8000) {
/* CTIA power save mode setting (code: 0x10008000) */
prAdapter->u4CtiaPowerMode = u4Data;
prAdapter->fgEnCtiaPowerMode = TRUE;
/* */
{
PARAM_POWER_MODE ePowerMode;
if (prAdapter->u4CtiaPowerMode == 0)
/* force to keep in CAM mode */
ePowerMode = Param_PowerModeCAM;
else if (prAdapter->u4CtiaPowerMode == 1)
ePowerMode = Param_PowerModeMAX_PSP;
else
ePowerMode = Param_PowerModeFast_PSP;
nicConfigPowerSaveProfile(prAdapter,
prAdapter->prAisBssInfo->ucBssIndex, ePowerMode, TRUE);
}
}
break;
case 0x1001:
if (u2SubId == 0x0)
prAdapter->fgEnOnlineScan = (BOOLEAN) u4Data;
else if (u2SubId == 0x1)
prAdapter->fgDisBcnLostDetection = (BOOLEAN) u4Data;
else if (u2SubId == 0x2)
prAdapter->rWifiVar.ucUapsd = (BOOLEAN) u4Data;
else if (u2SubId == 0x3) {
prAdapter->u4UapsdAcBmp = u4Data & BITS(0, 15);
GET_BSS_INFO_BY_INDEX(prAdapter,
u4Data >> 16)->rPmProfSetupInfo.ucBmpDeliveryAC =
(UINT_8) prAdapter->u4UapsdAcBmp;
GET_BSS_INFO_BY_INDEX(prAdapter,
u4Data >> 16)->rPmProfSetupInfo.ucBmpTriggerAC =
(UINT_8) prAdapter->u4UapsdAcBmp;
} else if (u2SubId == 0x4)
prAdapter->fgDisStaAgingTimeoutDetection = (BOOLEAN) u4Data;
else if (u2SubId == 0x5)
prAdapter->rWifiVar.rConnSettings.uc2G4BandwidthMode = (UINT_8) u4Data;
else if (u2SubId == 0x0100) {
if (u4Data == 2)
prAdapter->rWifiVar.ucRxGf = FEATURE_DISABLED;
else
prAdapter->rWifiVar.ucRxGf = FEATURE_ENABLED;
} else if (u2SubId == 0x0101)
prAdapter->rWifiVar.ucRxShortGI = (UINT_8) u4Data;
else if (u2SubId == 0x0110) {
prAdapter->fgIsEnableLpdvt = (BOOLEAN) u4Data;
prAdapter->fgEnOnlineScan = (BOOLEAN) u4Data;
DBGLOG(INIT, INFO, "--- Enable LPDVT [%d] ---\n", prAdapter->fgIsEnableLpdvt);
}
break;
#if CFG_SUPPORT_SWCR
case 0x1002:
#if CFG_RX_PKTS_DUMP
if (u2SubId == 0x0) {
if (u4Data)
u4Data = BIT(HIF_RX_PKT_TYPE_MANAGEMENT);
swCrFrameCheckEnable(prAdapter, u4Data);
}
#endif
if (u2SubId == 0x1) {
BOOLEAN fgIsEnable;
UINT_8 ucType;
UINT_32 u4Timeout;
fgIsEnable = (BOOLEAN) (u4Data & 0xff);
ucType = 0; /* ((u4Data>>4) & 0xf); */
u4Timeout = ((u4Data >> 8) & 0xff);
swCrDebugCheckEnable(prAdapter, fgIsEnable, ucType, u4Timeout);
}
break;
#endif
#if CFG_SUPPORT_802_11W
case 0x2000:
DBGLOG(RSN, INFO, "802.11w test 0x%x\n", u2SubId);
if (u2SubId == 0x0)
rsnStartSaQuery(prAdapter);
if (u2SubId == 0x1)
rsnStopSaQuery(prAdapter);
if (u2SubId == 0x2)
rsnSaQueryRequest(prAdapter, NULL);
if (u2SubId == 0x3) {
P_BSS_INFO_T prBssInfo = prAdapter->prAisBssInfo;
authSendDeauthFrame(prAdapter, prBssInfo, prBssInfo->prStaRecOfAP, NULL, 7, NULL);
}
/* wext_set_mode */
/*
* if (u2SubId == 0x3) {
* prAdapter->prGlueInfo->rWpaInfo.u4Mfp = RSN_AUTH_MFP_DISABLED;
* }
* if (u2SubId == 0x4) {
* //prAdapter->rWifiVar.rAisSpecificBssInfo.fgMgmtProtection = TRUE;
* prAdapter->prGlueInfo->rWpaInfo.u4Mfp = RSN_AUTH_MFP_OPTIONAL;
* }
* if (u2SubId == 0x5) {
* //prAdapter->rWifiVar.rAisSpecificBssInfo.fgMgmtProtection = TRUE;
* prAdapter->prGlueInfo->rWpaInfo.u4Mfp = RSN_AUTH_MFP_REQUIRED;
* }
*/
break;
#endif
case 0xFFFF:
{
/* CMD_ACCESS_REG rCmdAccessReg; */
#if 1 /* CFG_MT6573_SMT_TEST */
if (u2SubId == 0x0123) {
DBGLOG(HAL, INFO, "set smt fixed rate: %lu\n", u4Data);
if ((ENUM_REGISTRY_FIXED_RATE_T) (u4Data) < FIXED_RATE_NUM)
prAdapter->rWifiVar.eRateSetting = (ENUM_REGISTRY_FIXED_RATE_T) (u4Data);
else
prAdapter->rWifiVar.eRateSetting = FIXED_RATE_NONE;
if (prAdapter->rWifiVar.eRateSetting == FIXED_RATE_NONE)
/* Enable Auto (Long/Short) Preamble */
prAdapter->rWifiVar.ePreambleType = PREAMBLE_TYPE_AUTO;
else if ((prAdapter->rWifiVar.eRateSetting >= FIXED_RATE_MCS0_20M_400NS &&
prAdapter->rWifiVar.eRateSetting <= FIXED_RATE_MCS7_20M_400NS)
|| (prAdapter->rWifiVar.eRateSetting >= FIXED_RATE_MCS0_40M_400NS &&
prAdapter->rWifiVar.eRateSetting <= FIXED_RATE_MCS32_400NS))
/* Force Short Preamble */
prAdapter->rWifiVar.ePreambleType = PREAMBLE_TYPE_SHORT;
else
/* Force Long Preamble */
prAdapter->rWifiVar.ePreambleType = PREAMBLE_TYPE_LONG;
/* abort to re-connect */
#if 1
kalIndicateStatusAndComplete(prAdapter->prGlueInfo,
WLAN_STATUS_MEDIA_DISCONNECT, NULL, 0);
#else
aisBssBeaconTimeout(prAdapter);
#endif
return WLAN_STATUS_SUCCESS;
} else if (u2SubId == 0x1234) {
/* 1. Disable On-Lin Scan */
/* 3. Disable FIFO FULL no ack */
/* 4. Disable Roaming */
/* Disalbe auto tx power */
/* 2. Keep at CAM mode */
/* 5. Disable Beacon Timeout Detection */
rWlanStatus = nicEnterCtiaMode(prAdapter, TRUE, TRUE);
} else if (u2SubId == 0x1235) {
/* 1. Enaable On-Lin Scan */
/* 3. Enable FIFO FULL no ack */
/* 4. Enable Roaming */
/* Enable auto tx power */
/* 2. Keep at Fast PS */
/* 5. Enable Beacon Timeout Detection */
rWlanStatus = nicEnterCtiaMode(prAdapter, FALSE, TRUE);
}
#endif
#if CFG_MTK_STAGE_SCAN
else if (u2SubId == 0x1250)
prAdapter->aePreferBand[KAL_NETWORK_TYPE_AIS_INDEX] = BAND_NULL;
else if (u2SubId == 0x1251)
prAdapter->aePreferBand[KAL_NETWORK_TYPE_AIS_INDEX] = BAND_2G4;
else if (u2SubId == 0x1252) {
if (prAdapter->fgEnable5GBand)
prAdapter->aePreferBand[KAL_NETWORK_TYPE_AIS_INDEX] = BAND_5G;
else
/* Skip this setting if 5G band is disabled */
DBGLOG(SCN, INFO, "Skip 5G stage scan request due to 5G is disabled\n");
}
#endif
}
break;
case 0x9000:
default:
{
rCmdSwCtrl.u4Id = prSwCtrlInfo->u4Id;
rCmdSwCtrl.u4Data = prSwCtrlInfo->u4Data;
rWlanStatus = wlanSendSetQueryCmd(prAdapter,
CMD_ID_SW_DBG_CTRL,
TRUE,
FALSE,
TRUE,
nicCmdEventSetCommon,
nicOidCmdTimeoutCommon,
sizeof(CMD_SW_DBG_CTRL_T),
(PUINT_8) &rCmdSwCtrl, pvSetBuffer, u4SetBufferLen);
}
} /* switch(u2Id) */
return rWlanStatus;
} /* wlanoidSetSwCtrlWrite */
WLAN_STATUS
wlanoidQueryChipConfig(IN P_ADAPTER_T prAdapter,
IN PVOID pvQueryBuffer, IN UINT_32 u4QueryBufferLen, OUT PUINT_32 pu4QueryInfoLen)
{
P_PARAM_CUSTOM_CHIP_CONFIG_STRUCT_T prChipConfigInfo;
CMD_CHIP_CONFIG_T rCmdChipConfig;
WLAN_STATUS rWlanStatus = WLAN_STATUS_SUCCESS;
DEBUGFUNC("wlanoidQuerySwCtrlRead");
DBGLOG(INIT, LOUD, "\n");
ASSERT(prAdapter);
ASSERT(pu4QueryInfoLen);
if (u4QueryBufferLen)
ASSERT(pvQueryBuffer);
*pu4QueryInfoLen = sizeof(PARAM_CUSTOM_CHIP_CONFIG_STRUCT_T);
if (u4QueryBufferLen < sizeof(PARAM_CUSTOM_CHIP_CONFIG_STRUCT_T))
return WLAN_STATUS_INVALID_LENGTH;
prChipConfigInfo = (P_PARAM_CUSTOM_CHIP_CONFIG_STRUCT_T) pvQueryBuffer;
kalMemZero(&rCmdChipConfig, sizeof(rCmdChipConfig));
rCmdChipConfig.u2Id = prChipConfigInfo->u2Id;
rCmdChipConfig.ucType = prChipConfigInfo->ucType;
rCmdChipConfig.ucRespType = prChipConfigInfo->ucRespType;
rCmdChipConfig.u2MsgSize = prChipConfigInfo->u2MsgSize;
if (rCmdChipConfig.u2MsgSize > CHIP_CONFIG_RESP_SIZE) {
DBGLOG(REQ, INFO, "Chip config Msg Size %u is not valid (query)\n", rCmdChipConfig.u2MsgSize);
rCmdChipConfig.u2MsgSize = CHIP_CONFIG_RESP_SIZE;
}
kalMemCopy(rCmdChipConfig.aucCmd, prChipConfigInfo->aucCmd, rCmdChipConfig.u2MsgSize);
rWlanStatus = wlanSendSetQueryCmd(prAdapter, CMD_ID_CHIP_CONFIG, FALSE, TRUE, TRUE,
/*nicCmdEventQuerySwCtrlRead, */
nicCmdEventQueryChipConfig,
nicOidCmdTimeoutCommon,
sizeof(CMD_CHIP_CONFIG_T),
(PUINT_8) &rCmdChipConfig, pvQueryBuffer, u4QueryBufferLen);
return rWlanStatus;
}
/* end of wlanoidQueryChipConfig() */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to set chip
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[in] pvSetBuffer A pointer to the buffer that holds the data to be set.
* \param[in] u4SetBufferLen The length of the set buffer.
* \param[out] pu4SetInfoLen If the call is successful, returns the number of
* bytes read from the set buffer. If the call failed
* due to invalid length of the set buffer, returns
* the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_INVALID_LENGTH
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidSetChipConfig(IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
P_PARAM_CUSTOM_CHIP_CONFIG_STRUCT_T prChipConfigInfo;
CMD_CHIP_CONFIG_T rCmdChipConfig;
WLAN_STATUS rWlanStatus = WLAN_STATUS_SUCCESS;
DATA_STRUCT_INSPECTING_ASSERT(sizeof(prChipConfigInfo->aucCmd) == CHIP_CONFIG_RESP_SIZE);
DEBUGFUNC("wlanoidSetChipConfig");
DBGLOG(INIT, LOUD, "\n");
ASSERT(prAdapter);
ASSERT(pu4SetInfoLen);
*pu4SetInfoLen = sizeof(PARAM_CUSTOM_CHIP_CONFIG_STRUCT_T);
if (u4SetBufferLen < sizeof(PARAM_CUSTOM_CHIP_CONFIG_STRUCT_T))
return WLAN_STATUS_INVALID_LENGTH;
ASSERT(pvSetBuffer);
prChipConfigInfo = (P_PARAM_CUSTOM_CHIP_CONFIG_STRUCT_T) pvSetBuffer;
kalMemZero(&rCmdChipConfig, sizeof(rCmdChipConfig));
rCmdChipConfig.u2Id = prChipConfigInfo->u2Id;
rCmdChipConfig.ucType = prChipConfigInfo->ucType;
rCmdChipConfig.ucRespType = prChipConfigInfo->ucRespType;
rCmdChipConfig.u2MsgSize = prChipConfigInfo->u2MsgSize;
if (rCmdChipConfig.u2MsgSize > CHIP_CONFIG_RESP_SIZE) {
DBGLOG(REQ, INFO, "Chip config Msg Size %u is not valid (set)\n", rCmdChipConfig.u2MsgSize);
rCmdChipConfig.u2MsgSize = CHIP_CONFIG_RESP_SIZE;
}
kalMemCopy(rCmdChipConfig.aucCmd, prChipConfigInfo->aucCmd, rCmdChipConfig.u2MsgSize);
rWlanStatus = wlanSendSetQueryCmd(prAdapter,
CMD_ID_CHIP_CONFIG,
TRUE,
FALSE,
TRUE,
nicCmdEventSetCommon,
nicOidCmdTimeoutCommon,
sizeof(CMD_CHIP_CONFIG_T),
(PUINT_8) &rCmdChipConfig, pvSetBuffer, u4SetBufferLen);
return rWlanStatus;
} /* wlanoidSetChipConfig */
VOID
wlanLoadDefaultCustomerSetting(IN P_ADAPTER_T prAdapter) {
UINT_8 ucItemNum, i;
ucItemNum = (sizeof(g_rDefaulteSetting) / sizeof(PARAM_CUSTOM_KEY_CFG_STRUCT_T));
DBGLOG(INIT, INFO, "[wlanLoadDefaultCustomerSetting] default firmware setting %d item\n", ucItemNum);
for (i = 0; i < ucItemNum; i++) {
wlanCfgSet(prAdapter, g_rDefaulteSetting[i].aucKey, g_rDefaulteSetting[i].aucValue, 0);
DBGLOG(INIT, INFO, "%s with %s\n", g_rDefaulteSetting[i].aucKey, g_rDefaulteSetting[i].aucValue);
}
#if 1
/*If need to re-parsing , included wlanInitFeatureOption*/
wlanInitFeatureOption(prAdapter);
#endif
}
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to set cfg and callback
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[in] pvSetBuffer A pointer to the buffer that holds the data to be set.
* \param[in] u4SetBufferLen The length of the set buffer.
* \param[out] pu4SetInfoLen If the call is successful, returns the number of
* bytes read from the set buffer. If the call failed
* due to invalid length of the set buffer, returns
* the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_INVALID_LENGTH
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidSetKeyCfg(IN P_ADAPTER_T prAdapter, IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
WLAN_STATUS rWlanStatus = WLAN_STATUS_SUCCESS;
P_PARAM_CUSTOM_KEY_CFG_STRUCT_T prKeyCfgInfo;
DEBUGFUNC("wlanoidSetKeyCfg");
DBGLOG(INIT, LOUD, "\n");
ASSERT(prAdapter);
ASSERT(pu4SetInfoLen);
*pu4SetInfoLen = sizeof(PARAM_CUSTOM_KEY_CFG_STRUCT_T);
if (u4SetBufferLen < sizeof(PARAM_CUSTOM_KEY_CFG_STRUCT_T))
return WLAN_STATUS_INVALID_LENGTH;
ASSERT(pvSetBuffer);
prKeyCfgInfo = (P_PARAM_CUSTOM_KEY_CFG_STRUCT_T) pvSetBuffer;
if (kalMemCmp(prKeyCfgInfo->aucKey, "reload", 6) == 0)
wlanGetConfig(prAdapter); /* Reload config file */
else
wlanCfgSet(prAdapter, prKeyCfgInfo->aucKey, prKeyCfgInfo->aucValue, 0);
wlanInitFeatureOption(prAdapter);
#if CFG_SUPPORT_EASY_DEBUG
wlanFeatureToFw(prAdapter);
#endif
return rWlanStatus;
}
/* wlanoidSetSwCtrlWrite */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to query EEPROM value.
*
* \param[in] pvAdapter Pointer to the Adapter structure.
* \param[out] pvQueryBuf A pointer to the buffer that holds the result of
* the query.
* \param[in] u4QueryBufLen The length of the query buffer.
* \param[out] pu4QueryInfoLen If the call is successful, returns the number of
* bytes written into the query buffer. If the call
* failed due to invalid length of the query buffer,
* returns the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_FAILURE
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidQueryEepromRead(IN P_ADAPTER_T prAdapter,
IN PVOID pvQueryBuffer, IN UINT_32 u4QueryBufferLen, OUT PUINT_32 pu4QueryInfoLen)
{
P_PARAM_CUSTOM_EEPROM_RW_STRUCT_T prEepromRwInfo;
CMD_ACCESS_EEPROM rCmdAccessEeprom;
DEBUGFUNC("wlanoidQueryEepromRead");
ASSERT(prAdapter);
ASSERT(pu4QueryInfoLen);
if (u4QueryBufferLen)
ASSERT(pvQueryBuffer);
*pu4QueryInfoLen = sizeof(PARAM_CUSTOM_EEPROM_RW_STRUCT_T);
if (u4QueryBufferLen < sizeof(PARAM_CUSTOM_EEPROM_RW_STRUCT_T))
return WLAN_STATUS_INVALID_LENGTH;
prEepromRwInfo = (P_PARAM_CUSTOM_EEPROM_RW_STRUCT_T) pvQueryBuffer;
kalMemZero(&rCmdAccessEeprom, sizeof(CMD_ACCESS_EEPROM));
rCmdAccessEeprom.u2Offset = prEepromRwInfo->ucEepromIndex;
return wlanSendSetQueryCmd(prAdapter,
CMD_ID_ACCESS_EEPROM,
FALSE,
TRUE,
TRUE,
nicCmdEventQueryEepromRead,
nicOidCmdTimeoutCommon,
sizeof(CMD_ACCESS_EEPROM),
(PUINT_8) &rCmdAccessEeprom, pvQueryBuffer, u4QueryBufferLen);
} /* wlanoidQueryEepromRead */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to write EEPROM value.
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[in] pvSetBuffer A pointer to the buffer that holds the data to be set.
* \param[in] u4SetBufferLen The length of the set buffer.
* \param[out] pu4SetInfoLen If the call is successful, returns the number of
* bytes read from the set buffer. If the call failed
* due to invalid length of the set buffer, returns
* the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_FAILURE
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidSetEepromWrite(IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
P_PARAM_CUSTOM_EEPROM_RW_STRUCT_T prEepromRwInfo;
CMD_ACCESS_EEPROM rCmdAccessEeprom;
DEBUGFUNC("wlanoidSetEepromWrite");
DBGLOG(INIT, LOUD, "\n");
ASSERT(prAdapter);
ASSERT(pu4SetInfoLen);
*pu4SetInfoLen = sizeof(PARAM_CUSTOM_EEPROM_RW_STRUCT_T);
if (u4SetBufferLen < sizeof(PARAM_CUSTOM_EEPROM_RW_STRUCT_T))
return WLAN_STATUS_INVALID_LENGTH;
ASSERT(pvSetBuffer);
prEepromRwInfo = (P_PARAM_CUSTOM_EEPROM_RW_STRUCT_T) pvSetBuffer;
kalMemZero(&rCmdAccessEeprom, sizeof(CMD_ACCESS_EEPROM));
rCmdAccessEeprom.u2Offset = prEepromRwInfo->ucEepromIndex;
rCmdAccessEeprom.u2Data = prEepromRwInfo->u2EepromData;
return wlanSendSetQueryCmd(prAdapter,
CMD_ID_ACCESS_EEPROM,
TRUE,
FALSE,
TRUE,
nicCmdEventSetCommon,
nicOidCmdTimeoutCommon,
sizeof(CMD_ACCESS_EEPROM),
(PUINT_8) &rCmdAccessEeprom, pvSetBuffer, u4SetBufferLen);
} /* wlanoidSetEepromWrite */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to query the number of the successfully transmitted
* packets.
*
* \param[in] pvAdapter Pointer to the Adapter structure.
* \param[out] pvQueryBuf A pointer to the buffer that holds the result of
* the query.
* \param[in] u4QueryBufLen The length of the query buffer.
* \param[out] pu4QueryInfoLen If the call is successful, returns the number of
* bytes written into the query buffer. If the call
* failed due to invalid length of the query buffer,
* returns the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_INVALID_LENGTH
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidQueryXmitOk(IN P_ADAPTER_T prAdapter,
IN PVOID pvQueryBuffer, IN UINT_32 u4QueryBufferLen, OUT PUINT_32 pu4QueryInfoLen)
{
DEBUGFUNC("wlanoidQueryXmitOk");
DBGLOG(REQ, LOUD, "\n");
ASSERT(prAdapter);
if (u4QueryBufferLen)
ASSERT(pvQueryBuffer);
ASSERT(pu4QueryInfoLen);
if (prAdapter->rAcpiState == ACPI_STATE_D3) {
DBGLOG(REQ, WARN,
"Fail in query receive error! (Adapter not ready). ACPI=D%d, Radio=%d\n",
prAdapter->rAcpiState, prAdapter->fgIsRadioOff);
*pu4QueryInfoLen = sizeof(UINT_32);
return WLAN_STATUS_ADAPTER_NOT_READY;
} else if (u4QueryBufferLen < sizeof(UINT_32)
|| (u4QueryBufferLen > sizeof(UINT_32) && u4QueryBufferLen < sizeof(UINT_64))) {
*pu4QueryInfoLen = sizeof(UINT_64);
return WLAN_STATUS_INVALID_LENGTH;
}
#if CFG_ENABLE_STATISTICS_BUFFERING
if (IsBufferedStatisticsUsable(prAdapter) == TRUE) {
if (u4QueryBufferLen == sizeof(UINT_32)) {
*pu4QueryInfoLen = sizeof(UINT_32);
*(PUINT_32) pvQueryBuffer = (UINT_32) prAdapter->rStatStruct.rTransmittedFragmentCount.QuadPart;
} else {
*pu4QueryInfoLen = sizeof(UINT_64);
*(PUINT_64) pvQueryBuffer = (UINT_64) prAdapter->rStatStruct.rTransmittedFragmentCount.QuadPart;
}
return WLAN_STATUS_SUCCESS;
}
#endif
return wlanSendSetQueryCmd(prAdapter,
CMD_ID_GET_STATISTICS,
FALSE,
TRUE,
TRUE,
nicCmdEventQueryXmitOk,
nicOidCmdTimeoutCommon, 0, NULL, pvQueryBuffer, u4QueryBufferLen);
} /* wlanoidQueryXmitOk */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to query the number of the successfully received
* packets.
*
* \param[in] pvAdapter Pointer to the Adapter structure.
* \param[out] pvQueryBuf A pointer to the buffer that holds the result of
* the query.
* \param[in] u4QueryBufLen The length of the query buffer.
* \param[out] pu4QueryInfoLen If the call is successful, returns the number of
* bytes written into the query buffer. If the call
* failed due to invalid length of the query buffer,
* returns the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_INVALID_LENGTH
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidQueryRcvOk(IN P_ADAPTER_T prAdapter,
IN PVOID pvQueryBuffer, IN UINT_32 u4QueryBufferLen, OUT PUINT_32 pu4QueryInfoLen)
{
DEBUGFUNC("wlanoidQueryRcvOk");
DBGLOG(REQ, LOUD, "\n");
ASSERT(prAdapter);
if (u4QueryBufferLen)
ASSERT(pvQueryBuffer);
ASSERT(pu4QueryInfoLen);
if (prAdapter->rAcpiState == ACPI_STATE_D3) {
DBGLOG(REQ, WARN,
"Fail in query receive error! (Adapter not ready). ACPI=D%d, Radio=%d\n",
prAdapter->rAcpiState, prAdapter->fgIsRadioOff);
*pu4QueryInfoLen = sizeof(UINT_32);
return WLAN_STATUS_ADAPTER_NOT_READY;
} else if (u4QueryBufferLen < sizeof(UINT_32)
|| (u4QueryBufferLen > sizeof(UINT_32) && u4QueryBufferLen < sizeof(UINT_64))) {
*pu4QueryInfoLen = sizeof(UINT_64);
return WLAN_STATUS_INVALID_LENGTH;
}
#if CFG_ENABLE_STATISTICS_BUFFERING
if (IsBufferedStatisticsUsable(prAdapter) == TRUE) {
if (u4QueryBufferLen == sizeof(UINT_32)) {
*pu4QueryInfoLen = sizeof(UINT_32);
*(PUINT_32) pvQueryBuffer = (UINT_32) prAdapter->rStatStruct.rReceivedFragmentCount.QuadPart;
} else {
*pu4QueryInfoLen = sizeof(UINT_64);
*(PUINT_64) pvQueryBuffer = (UINT_64) prAdapter->rStatStruct.rReceivedFragmentCount.QuadPart;
}
return WLAN_STATUS_SUCCESS;
}
#endif
return wlanSendSetQueryCmd(prAdapter,
CMD_ID_GET_STATISTICS,
FALSE,
TRUE,
TRUE,
nicCmdEventQueryRecvOk,
nicOidCmdTimeoutCommon, 0, NULL, pvQueryBuffer, u4QueryBufferLen);
} /* wlanoidQueryRcvOk */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to query the number of frames that the driver
* fails to transmit.
*
* \param[in] pvAdapter Pointer to the Adapter structure.
* \param[out] pvQueryBuf A pointer to the buffer that holds the result of
* the query.
* \param[in] u4QueryBufLen The length of the query buffer.
* \param[out] pu4QueryInfoLen If the call is successful, returns the number of
* bytes written into the query buffer. If the call
* failed due to invalid length of the query buffer,
* returns the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_INVALID_LENGTH
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidQueryXmitError(IN P_ADAPTER_T prAdapter,
IN PVOID pvQueryBuffer, IN UINT_32 u4QueryBufferLen, OUT PUINT_32 pu4QueryInfoLen)
{
DEBUGFUNC("wlanoidQueryXmitError");
DBGLOG(REQ, LOUD, "\n");
ASSERT(prAdapter);
if (u4QueryBufferLen)
ASSERT(pvQueryBuffer);
ASSERT(pu4QueryInfoLen);
if (prAdapter->rAcpiState == ACPI_STATE_D3) {
DBGLOG(REQ, WARN,
"Fail in query receive error! (Adapter not ready). ACPI=D%d, Radio=%d\n",
prAdapter->rAcpiState, prAdapter->fgIsRadioOff);
*pu4QueryInfoLen = sizeof(UINT_32);
return WLAN_STATUS_ADAPTER_NOT_READY;
} else if (u4QueryBufferLen < sizeof(UINT_32)
|| (u4QueryBufferLen > sizeof(UINT_32) && u4QueryBufferLen < sizeof(UINT_64))) {
*pu4QueryInfoLen = sizeof(UINT_64);
return WLAN_STATUS_INVALID_LENGTH;
}
#if CFG_ENABLE_STATISTICS_BUFFERING
if (IsBufferedStatisticsUsable(prAdapter) == TRUE) {
if (u4QueryBufferLen == sizeof(UINT_32)) {
*pu4QueryInfoLen = sizeof(UINT_32);
*(PUINT_32) pvQueryBuffer = (UINT_32) prAdapter->rStatStruct.rFailedCount.QuadPart;
} else {
*pu4QueryInfoLen = sizeof(UINT_64);
*(PUINT_64) pvQueryBuffer = (UINT_64) prAdapter->rStatStruct.rFailedCount.QuadPart;
}
return WLAN_STATUS_SUCCESS;
}
#endif
return wlanSendSetQueryCmd(prAdapter,
CMD_ID_GET_STATISTICS,
FALSE,
TRUE,
TRUE,
nicCmdEventQueryXmitError,
nicOidCmdTimeoutCommon, 0, NULL, pvQueryBuffer, u4QueryBufferLen);
} /* wlanoidQueryXmitError */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to query the number of frames successfully
* transmitted after exactly one collision.
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[out] pvQueryBuf A pointer to the buffer that holds the result of
* the query.
* \param[in] u4QueryBufLen The length of the query buffer.
* \param[out] pu4QueryInfoLen If the call is successful, returns the number of
* bytes written into the query buffer. If the call
* failed due to invalid length of the query buffer,
* returns the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_INVALID_LENGTH
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidQueryXmitOneCollision(IN P_ADAPTER_T prAdapter,
IN PVOID pvQueryBuffer, IN UINT_32 u4QueryBufferLen, OUT PUINT_32 pu4QueryInfoLen)
{
DEBUGFUNC("wlanoidQueryXmitOneCollision");
DBGLOG(REQ, LOUD, "\n");
ASSERT(prAdapter);
if (u4QueryBufferLen)
ASSERT(pvQueryBuffer);
ASSERT(pu4QueryInfoLen);
if (prAdapter->rAcpiState == ACPI_STATE_D3) {
DBGLOG(REQ, WARN,
"Fail in query receive error! (Adapter not ready). ACPI=D%d, Radio=%d\n",
prAdapter->rAcpiState, prAdapter->fgIsRadioOff);
*pu4QueryInfoLen = sizeof(UINT_32);
return WLAN_STATUS_ADAPTER_NOT_READY;
} else if (u4QueryBufferLen < sizeof(UINT_32)
|| (u4QueryBufferLen > sizeof(UINT_32) && u4QueryBufferLen < sizeof(UINT_64))) {
*pu4QueryInfoLen = sizeof(UINT_64);
return WLAN_STATUS_INVALID_LENGTH;
}
#if CFG_ENABLE_STATISTICS_BUFFERING
if (IsBufferedStatisticsUsable(prAdapter) == TRUE) {
if (u4QueryBufferLen == sizeof(UINT_32)) {
*pu4QueryInfoLen = sizeof(UINT_32);
*(PUINT_32) pvQueryBuffer = (UINT_32)
(prAdapter->rStatStruct.rMultipleRetryCount.QuadPart -
prAdapter->rStatStruct.rRetryCount.QuadPart);
} else {
*pu4QueryInfoLen = sizeof(UINT_64);
*(PUINT_64) pvQueryBuffer = (UINT_64)
(prAdapter->rStatStruct.rMultipleRetryCount.QuadPart -
prAdapter->rStatStruct.rRetryCount.QuadPart);
}
return WLAN_STATUS_SUCCESS;
}
#endif
return wlanSendSetQueryCmd(prAdapter,
CMD_ID_GET_STATISTICS,
FALSE,
TRUE,
TRUE,
nicCmdEventQueryXmitOneCollision,
nicOidCmdTimeoutCommon, 0, NULL, pvQueryBuffer, u4QueryBufferLen);
} /* wlanoidQueryXmitOneCollision */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to query the number of frames successfully
* transmitted after more than one collision.
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[out] pvQueryBuf A pointer to the buffer that holds the result of
* the query.
* \param[in] u4QueryBufLen The length of the query buffer.
* \param[out] pu4QueryInfoLen If the call is successful, returns the number of
* bytes written into the query buffer. If the call
* failed due to invalid length of the query buffer,
* returns the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_INVALID_LENGTH
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidQueryXmitMoreCollisions(IN P_ADAPTER_T prAdapter,
IN PVOID pvQueryBuffer, IN UINT_32 u4QueryBufferLen, OUT PUINT_32 pu4QueryInfoLen)
{
DEBUGFUNC("wlanoidQueryXmitMoreCollisions");
DBGLOG(REQ, LOUD, "\n");
ASSERT(prAdapter);
if (u4QueryBufferLen)
ASSERT(pvQueryBuffer);
ASSERT(pu4QueryInfoLen);
if (prAdapter->rAcpiState == ACPI_STATE_D3) {
DBGLOG(REQ, WARN,
"Fail in query receive error! (Adapter not ready). ACPI=D%d, Radio=%d\n",
prAdapter->rAcpiState, prAdapter->fgIsRadioOff);
*pu4QueryInfoLen = sizeof(UINT_32);
return WLAN_STATUS_ADAPTER_NOT_READY;
} else if (u4QueryBufferLen < sizeof(UINT_32)
|| (u4QueryBufferLen > sizeof(UINT_32) && u4QueryBufferLen < sizeof(UINT_64))) {
*pu4QueryInfoLen = sizeof(UINT_64);
return WLAN_STATUS_INVALID_LENGTH;
}
#if CFG_ENABLE_STATISTICS_BUFFERING
if (IsBufferedStatisticsUsable(prAdapter) == TRUE) {
if (u4QueryBufferLen == sizeof(UINT_32)) {
*pu4QueryInfoLen = sizeof(UINT_32);
*(PUINT_32) pvQueryBuffer = (UINT_32) (prAdapter->rStatStruct.rMultipleRetryCount.QuadPart);
} else {
*pu4QueryInfoLen = sizeof(UINT_64);
*(PUINT_64) pvQueryBuffer = (UINT_64) (prAdapter->rStatStruct.rMultipleRetryCount.QuadPart);
}
return WLAN_STATUS_SUCCESS;
}
#endif
return wlanSendSetQueryCmd(prAdapter,
CMD_ID_GET_STATISTICS,
FALSE,
TRUE,
TRUE,
nicCmdEventQueryXmitMoreCollisions,
nicOidCmdTimeoutCommon, 0, NULL, pvQueryBuffer, u4QueryBufferLen);
} /* wlanoidQueryXmitMoreCollisions */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to query the number of frames
* not transmitted due to excessive collisions.
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[in] pvQueryBuffer Pointer to the buffer that holds the result of
* the query.
* \param[in] u4QueryBufferLen The length of the query buffer.
* \param[out] pu4QueryInfoLen If the call is successful, returns the number of
* bytes written into the query buffer. If the call
* failed due to invalid length of the query buffer,
* returns the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_INVALID_LENGTH
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidQueryXmitMaxCollisions(IN P_ADAPTER_T prAdapter,
IN PVOID pvQueryBuffer, IN UINT_32 u4QueryBufferLen, OUT PUINT_32 pu4QueryInfoLen)
{
DEBUGFUNC("wlanoidQueryXmitMaxCollisions");
DBGLOG(REQ, LOUD, "\n");
ASSERT(prAdapter);
if (u4QueryBufferLen)
ASSERT(pvQueryBuffer);
ASSERT(pu4QueryInfoLen);
if (prAdapter->rAcpiState == ACPI_STATE_D3) {
DBGLOG(REQ, WARN,
"Fail in query receive error! (Adapter not ready). ACPI=D%d, Radio=%d\n",
prAdapter->rAcpiState, prAdapter->fgIsRadioOff);
*pu4QueryInfoLen = sizeof(UINT_32);
return WLAN_STATUS_ADAPTER_NOT_READY;
} else if (u4QueryBufferLen < sizeof(UINT_32)
|| (u4QueryBufferLen > sizeof(UINT_32) && u4QueryBufferLen < sizeof(UINT_64))) {
*pu4QueryInfoLen = sizeof(UINT_64);
return WLAN_STATUS_INVALID_LENGTH;
}
#if CFG_ENABLE_STATISTICS_BUFFERING
if (IsBufferedStatisticsUsable(prAdapter) == TRUE) {
if (u4QueryBufferLen == sizeof(UINT_32)) {
*pu4QueryInfoLen = sizeof(UINT_32);
*(PUINT_32) pvQueryBuffer = (UINT_32) prAdapter->rStatStruct.rFailedCount.QuadPart;
} else {
*pu4QueryInfoLen = sizeof(UINT_64);
*(PUINT_64) pvQueryBuffer = (UINT_64) prAdapter->rStatStruct.rFailedCount.QuadPart;
}
return WLAN_STATUS_SUCCESS;
}
#endif
return wlanSendSetQueryCmd(prAdapter,
CMD_ID_GET_STATISTICS,
FALSE,
TRUE,
TRUE,
nicCmdEventQueryXmitMaxCollisions,
nicOidCmdTimeoutCommon, 0, NULL, pvQueryBuffer, u4QueryBufferLen);
} /* wlanoidQueryXmitMaxCollisions */
#define MTK_CUSTOM_OID_INTERFACE_VERSION 0x00006620 /* for WPDWifi DLL */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to query current the OID interface version,
* which is the interface between the application and driver.
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[in] pvQueryBuffer Pointer to the buffer that holds the result of
* the query.
* \param[in] u4QueryBufferLen The length of the query buffer.
* \param[out] pu4QueryInfoLen If the call is successful, returns the number of
* bytes written into the query buffer. If the call
* failed due to invalid length of the query buffer,
* returns the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidQueryOidInterfaceVersion(IN P_ADAPTER_T prAdapter,
IN PVOID pvQueryBuffer, IN UINT_32 u4QueryBufferLen, OUT PUINT_32 pu4QueryInfoLen)
{
DEBUGFUNC("wlanoidQueryOidInterfaceVersion");
ASSERT(prAdapter);
if (u4QueryBufferLen)
ASSERT(pvQueryBuffer);
ASSERT(pu4QueryInfoLen);
*(PUINT_32) pvQueryBuffer = MTK_CUSTOM_OID_INTERFACE_VERSION;
*pu4QueryInfoLen = sizeof(UINT_32);
DBGLOG(REQ, WARN, "Custom OID interface version: %#08lX\n", *(PUINT_32) pvQueryBuffer);
return WLAN_STATUS_SUCCESS;
} /* wlanoidQueryOidInterfaceVersion */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to query current Multicast Address List.
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[in] pvQueryBuffer Pointer to the buffer that holds the result of
* the query.
* \param[in] u4QueryBufferLen The length of the query buffer.
* \param[out] pu4QueryInfoLen If the call is successful, returns the number of
* bytes written into the query buffer. If the call
* failed due to invalid length of the query buffer,
* returns the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_BUFFER_TOO_SHORT
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidQueryMulticastList(IN P_ADAPTER_T prAdapter,
OUT PVOID pvQueryBuffer, IN UINT_32 u4QueryBufferLen, OUT PUINT_32 pu4QueryInfoLen)
{
#ifndef LINUX
ASSERT(prAdapter);
ASSERT(pu4QueryInfoLen);
if (u4QueryBufferLen)
ASSERT(pvQueryBuffer);
return wlanSendSetQueryCmd(prAdapter,
CMD_ID_MAC_MCAST_ADDR,
FALSE,
TRUE,
TRUE,
nicCmdEventQueryMcastAddr,
nicOidCmdTimeoutCommon, 0, NULL, pvQueryBuffer, u4QueryBufferLen);
#else
return WLAN_STATUS_SUCCESS;
#endif
} /* end of wlanoidQueryMulticastList() */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to set Multicast Address List.
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[in] pvSetBuffer Pointer to the buffer that holds the data to be set.
* \param[in] u4SetBufferLen The length of the set buffer.
* \param[out] pu4SetInfoLen If the call is successful, returns the number of
* bytes read from the set buffer. If the call failed
* due to invalid length of the set buffer, returns
* the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_INVALID_LENGTH
* \retval WLAN_STATUS_ADAPTER_NOT_READY
* \retval WLAN_STATUS_MULTICAST_FULL
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidSetMulticastList(IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
CMD_MAC_MCAST_ADDR rCmdMacMcastAddr;
ASSERT(prAdapter);
ASSERT(pu4SetInfoLen);
/* The data must be a multiple of the Ethernet address size. */
if ((u4SetBufferLen % MAC_ADDR_LEN)) {
DBGLOG(REQ, WARN, "Invalid MC list length %ld\n", u4SetBufferLen);
*pu4SetInfoLen = (((u4SetBufferLen + MAC_ADDR_LEN) - 1) / MAC_ADDR_LEN) * MAC_ADDR_LEN;
return WLAN_STATUS_INVALID_LENGTH;
}
*pu4SetInfoLen = u4SetBufferLen;
/* Verify if we can support so many multicast addresses. */
if (u4SetBufferLen > MAX_NUM_GROUP_ADDR * MAC_ADDR_LEN) {
DBGLOG(REQ, WARN, "Too many MC addresses\n");
return WLAN_STATUS_MULTICAST_FULL;
}
/* NOTE(Kevin): Windows may set u4SetBufferLen == 0 &&
* pvSetBuffer == NULL to clear exist Multicast List.
*/
if (u4SetBufferLen)
ASSERT(pvSetBuffer);
if (prAdapter->rAcpiState == ACPI_STATE_D3) {
DBGLOG(REQ, WARN,
"Fail in set multicast list! (Adapter not ready). ACPI=D%d, Radio=%d\n",
prAdapter->rAcpiState, prAdapter->fgIsRadioOff);
return WLAN_STATUS_ADAPTER_NOT_READY;
}
rCmdMacMcastAddr.u4NumOfGroupAddr = u4SetBufferLen / MAC_ADDR_LEN;
rCmdMacMcastAddr.ucBssIndex = prAdapter->prAisBssInfo->ucBssIndex;
kalMemCopy(rCmdMacMcastAddr.arAddress, pvSetBuffer, u4SetBufferLen);
return wlanSendSetQueryCmd(prAdapter,
CMD_ID_MAC_MCAST_ADDR,
TRUE,
FALSE,
TRUE,
nicCmdEventSetCommon,
nicOidCmdTimeoutCommon,
sizeof(CMD_MAC_MCAST_ADDR),
(PUINT_8) &rCmdMacMcastAddr, pvSetBuffer, u4SetBufferLen);
} /* end of wlanoidSetMulticastList() */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to set Packet Filter.
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[in] pvSetBuffer Pointer to the buffer that holds the data to be set.
* \param[in] u4SetBufferLen The length of the set buffer.
* \param[out] pu4SetInfoLen If the call is successful, returns the number of
* bytes read from the set buffer. If the call failed
* due to invalid length of the set buffer, returns
* the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_INVALID_LENGTH
* \retval WLAN_STATUS_NOT_SUPPORTED
* \retval WLAN_STATUS_ADAPTER_NOT_READY
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidSetCurrentPacketFilter(IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
UINT_32 u4NewPacketFilter;
WLAN_STATUS rStatus = WLAN_STATUS_SUCCESS;
WLAN_STATUS rResult = WLAN_STATUS_FAILURE;
CMD_RX_PACKET_FILTER rSetRxPacketFilter;
DBGLOG(REQ, INFO, "wlanoidSetCurrentPacketFilter");
ASSERT(prAdapter);
ASSERT(pu4SetInfoLen);
if (u4SetBufferLen < sizeof(UINT_32)) {
*pu4SetInfoLen = sizeof(UINT_32);
return WLAN_STATUS_INVALID_LENGTH;
}
ASSERT(pvSetBuffer);
/* Set the new packet filter. */
u4NewPacketFilter = *(PUINT_32) pvSetBuffer;
DBGLOG(REQ, INFO, "New packet filter: %#08lx\n", u4NewPacketFilter);
if (prAdapter->rAcpiState == ACPI_STATE_D3) {
DBGLOG(REQ, WARN,
"Fail in set current packet filter! (Adapter not ready). ACPI=D%d, Radio=%d\n",
prAdapter->rAcpiState, prAdapter->fgIsRadioOff);
return WLAN_STATUS_ADAPTER_NOT_READY;
}
do {
/* Verify the bits of the new packet filter. If any bits are set that
* we don't support, leave.
*/
if (u4NewPacketFilter & ~(PARAM_PACKET_FILTER_SUPPORTED)) {
rStatus = WLAN_STATUS_NOT_SUPPORTED;
DBGLOG(REQ, WARN, "some flags we don't support\n");
break;
}
#if DBG
/* Need to enable or disable promiscuous support depending on the new
* filter.
*/
if (u4NewPacketFilter & PARAM_PACKET_FILTER_PROMISCUOUS)
DBGLOG(REQ, INFO, "Enable promiscuous mode\n");
else
DBGLOG(REQ, INFO, "Disable promiscuous mode\n");
if (u4NewPacketFilter & PARAM_PACKET_FILTER_ALL_MULTICAST)
DBGLOG(REQ, INFO, "Enable all-multicast mode\n");
else if (u4NewPacketFilter & PARAM_PACKET_FILTER_MULTICAST)
DBGLOG(REQ, INFO, "Enable multicast\n");
else
DBGLOG(REQ, INFO, "Disable multicast\n");
if (u4NewPacketFilter & PARAM_PACKET_FILTER_BROADCAST)
DBGLOG(REQ, INFO, "Enable Broadcast\n");
else
DBGLOG(REQ, INFO, "Disable Broadcast\n");
#endif
prAdapter->fgAllMulicastFilter = FALSE;
if (u4NewPacketFilter & PARAM_PACKET_FILTER_ALL_MULTICAST)
prAdapter->fgAllMulicastFilter = TRUE;
} while (FALSE);
if (rStatus == WLAN_STATUS_SUCCESS) {
/* Store the packet filter */
prAdapter->u4OsPacketFilter &= PARAM_PACKET_FILTER_P2P_MASK;
prAdapter->u4OsPacketFilter |= u4NewPacketFilter;
rSetRxPacketFilter.u4RxPacketFilter = prAdapter->u4OsPacketFilter;
rResult = wlanSendSetQueryCmd(prAdapter,
CMD_ID_SET_RX_FILTER,
TRUE,
FALSE,
TRUE,
nicCmdEventSetCommon,
nicOidCmdTimeoutCommon,
sizeof(CMD_RX_PACKET_FILTER),
(PUINT_8) &rSetRxPacketFilter, pvSetBuffer, u4SetBufferLen);
prAdapter->u4OsPacketFilter = rSetRxPacketFilter.u4RxPacketFilter;
return rResult;
} else {
return rStatus;
}
} /* wlanoidSetCurrentPacketFilter */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to query current packet filter.
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[in] pvQueryBuffer Pointer to the buffer that holds the result of
* the query.
* \param[in] u4QueryBufferLen The length of the query buffer.
* \param[out] pu4QueryInfoLen If the call is successful, returns the number of
* bytes written into the query buffer. If the call
* failed due to invalid length of the query buffer,
* returns the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidQueryCurrentPacketFilter(IN P_ADAPTER_T prAdapter,
OUT PVOID pvQueryBuffer, IN UINT_32 u4QueryBufferLen, OUT PUINT_32 pu4QueryInfoLen)
{
DEBUGFUNC("wlanoidQueryCurrentPacketFilter");
ASSERT(prAdapter);
ASSERT(pu4QueryInfoLen);
*pu4QueryInfoLen = sizeof(UINT_32);
if (u4QueryBufferLen >= sizeof(UINT_32)) {
ASSERT(pvQueryBuffer);
*(PUINT_32) pvQueryBuffer = prAdapter->u4OsPacketFilter;
}
return WLAN_STATUS_SUCCESS;
} /* wlanoidQueryCurrentPacketFilter */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to query ACPI device power state.
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[in] pvQueryBuffer Pointer to the buffer that holds the result of
* the query.
* \param[in] u4QueryBufferLen The length of the query buffer.
* \param[out] pu4QueryInfoLen If the call is successful, returns the number of
* bytes written into the query buffer. If the call
* failed due to invalid length of the query buffer,
* returns the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidQueryAcpiDevicePowerState(IN P_ADAPTER_T prAdapter,
IN PVOID pvQueryBuffer, IN UINT_32 u4QueryBufferLen, OUT PUINT_32 pu4QueryInfoLen)
{
#if DBG
PPARAM_DEVICE_POWER_STATE prPowerState;
#endif
DEBUGFUNC("wlanoidQueryAcpiDevicePowerState");
ASSERT(prAdapter);
ASSERT(pu4QueryInfoLen);
if (u4QueryBufferLen)
ASSERT(pvQueryBuffer);
*pu4QueryInfoLen = sizeof(PARAM_DEVICE_POWER_STATE);
#if DBG
prPowerState = (PPARAM_DEVICE_POWER_STATE) pvQueryBuffer;
switch (*prPowerState) {
case ParamDeviceStateD0:
DBGLOG(REQ, INFO, "Query Power State: D0\n");
break;
case ParamDeviceStateD1:
DBGLOG(REQ, INFO, "Query Power State: D1\n");
break;
case ParamDeviceStateD2:
DBGLOG(REQ, INFO, "Query Power State: D2\n");
break;
case ParamDeviceStateD3:
DBGLOG(REQ, INFO, "Query Power State: D3\n");
break;
default:
break;
}
#endif
/* Since we will disconnect the newwork, therefore we do not
* need to check queue empty
*/
*(PPARAM_DEVICE_POWER_STATE) pvQueryBuffer = ParamDeviceStateD3;
/* WARNLOG(("Ready to transition to D3\n")); */
return WLAN_STATUS_SUCCESS;
} /* pwrmgtQueryPower */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to set ACPI device power state.
*
* \param[in] pvAdapter Pointer to the Adapter structure.
* \param[in] pvSetBuffer A pointer to the buffer that holds the data to be set.
* \param[in] u4SetBufferLen The length of the set buffer.
* \param[out] pu4SetInfoLen If the call is successful, returns the number of
* bytes read from the set buffer. If the call failed
* due to invalid length of the set buffer, returns
* the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidSetAcpiDevicePowerState(IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
PPARAM_DEVICE_POWER_STATE prPowerState;
BOOLEAN fgRetValue = TRUE;
DEBUGFUNC("wlanoidSetAcpiDevicePowerState");
ASSERT(prAdapter);
ASSERT(pu4SetInfoLen);
*pu4SetInfoLen = sizeof(PARAM_DEVICE_POWER_STATE);
ASSERT(pvSetBuffer);
prPowerState = (PPARAM_DEVICE_POWER_STATE) pvSetBuffer;
switch (*prPowerState) {
case ParamDeviceStateD0:
DBGLOG(REQ, INFO, "Set Power State: D0\n");
kalDevSetPowerState(prAdapter->prGlueInfo, (UINT_32) ParamDeviceStateD0);
fgRetValue = nicpmSetAcpiPowerD0(prAdapter);
break;
case ParamDeviceStateD1:
DBGLOG(REQ, INFO, "Set Power State: D1\n");
/* no break here */
case ParamDeviceStateD2:
DBGLOG(REQ, INFO, "Set Power State: D2\n");
/* no break here */
case ParamDeviceStateD3:
DBGLOG(REQ, INFO, "Set Power State: D3\n");
fgRetValue = nicpmSetAcpiPowerD3(prAdapter);
kalDevSetPowerState(prAdapter->prGlueInfo, (UINT_32) ParamDeviceStateD3);
break;
default:
break;
}
if (fgRetValue == TRUE)
return WLAN_STATUS_SUCCESS;
else
return WLAN_STATUS_FAILURE;
} /* end of wlanoidSetAcpiDevicePowerState() */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to query the current fragmentation threshold.
*
* \param[in] pvAdapter Pointer to the Adapter structure.
* \param[out] pvQueryBuffer A pointer to the buffer that holds the result of
* the query.
* \param[in] u4QueryBufferLen The length of the query buffer.
* \param[out] pu4QueryInfoLen If the call is successful, returns the number of
* bytes written into the query buffer. If the call
* failed due to invalid length of the query buffer,
* returns the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_BUFFER_TOO_SHORT
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidQueryFragThreshold(IN P_ADAPTER_T prAdapter,
OUT PVOID pvQueryBuffer, IN UINT_32 u4QueryBufferLen, OUT PUINT_32 pu4QueryInfoLen)
{
DEBUGFUNC("wlanoidQueryFragThreshold");
ASSERT(prAdapter);
if (u4QueryBufferLen)
ASSERT(pvQueryBuffer);
ASSERT(pu4QueryInfoLen);
DBGLOG(REQ, LOUD, "\n");
#if CFG_TX_FRAGMENT
return WLAN_STATUS_SUCCESS;
#else
return WLAN_STATUS_NOT_SUPPORTED;
#endif /* CFG_TX_FRAGMENT */
} /* end of wlanoidQueryFragThreshold() */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to set a new fragmentation threshold to the
* driver.
*
* \param[in] pvAdapter Pointer to the Adapter structure.
* \param[in] pvSetBuffer A pointer to the buffer that holds the data to be set.
* \param[in] u4SetBufferLen The length of the set buffer.
* \param[out] pu4SetInfoLen If the call is successful, returns the number of
* bytes read from the set buffer. If the call failed
* due to invalid length of the set buffer, returns
* the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_INVALID_DATA
* \retval WLAN_STATUS_INVALID_LENGTH
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidSetFragThreshold(IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
#if CFG_TX_FRAGMENT
return WLAN_STATUS_SUCCESS;
#else
return WLAN_STATUS_NOT_SUPPORTED;
#endif /* CFG_TX_FRAGMENT */
} /* end of wlanoidSetFragThreshold() */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to query the current RTS threshold.
*
* \param[in] pvAdapter Pointer to the Adapter structure.
* \param[out] pvQueryBuffer A pointer to the buffer that holds the result of
* the query.
* \param[in] u4QueryBufferLen The length of the query buffer.
* \param[out] pu4QueryInfoLen If the call is successful, returns the number of
* bytes written into the query buffer. If the call
* failed due to invalid length of the query buffer,
* returns the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_BUFFER_TOO_SHORT
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidQueryRtsThreshold(IN P_ADAPTER_T prAdapter,
OUT PVOID pvQueryBuffer, IN UINT_32 u4QueryBufferLen, OUT PUINT_32 pu4QueryInfoLen)
{
DEBUGFUNC("wlanoidQueryRtsThreshold");
ASSERT(prAdapter);
if (u4QueryBufferLen)
ASSERT(pvQueryBuffer);
ASSERT(pu4QueryInfoLen);
DBGLOG(REQ, LOUD, "\n");
if (u4QueryBufferLen < sizeof(PARAM_RTS_THRESHOLD)) {
*pu4QueryInfoLen = sizeof(PARAM_RTS_THRESHOLD);
return WLAN_STATUS_BUFFER_TOO_SHORT;
}
*((PARAM_RTS_THRESHOLD *) pvQueryBuffer) = prAdapter->rWlanInfo.eRtsThreshold;
return WLAN_STATUS_SUCCESS;
} /* wlanoidQueryRtsThreshold */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to set a new RTS threshold to the driver.
*
* \param[in] pvAdapter Pointer to the Adapter structure.
* \param[in] pvSetBuffer A pointer to the buffer that holds the data to be set.
* \param[in] u4SetBufferLen The length of the set buffer.
* \param[out] pu4SetInfoLen If the call is successful, returns the number of
* bytes read from the set buffer. If the call failed
* due to invalid length of the set buffer, returns
* the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_INVALID_DATA
* \retval WLAN_STATUS_INVALID_LENGTH
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidSetRtsThreshold(IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
PARAM_RTS_THRESHOLD *prRtsThreshold;
ASSERT(prAdapter);
ASSERT(pu4SetInfoLen);
*pu4SetInfoLen = sizeof(PARAM_RTS_THRESHOLD);
if (u4SetBufferLen < sizeof(PARAM_RTS_THRESHOLD)) {
DBGLOG(REQ, WARN, "Invalid length %ld\n", u4SetBufferLen);
return WLAN_STATUS_INVALID_LENGTH;
}
prRtsThreshold = (PARAM_RTS_THRESHOLD *) pvSetBuffer;
*prRtsThreshold = prAdapter->rWlanInfo.eRtsThreshold;
return WLAN_STATUS_SUCCESS;
} /* wlanoidSetRtsThreshold */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is used to turn radio off.
*
* \param[in] pvAdapter Pointer to the Adapter structure.
* \param[in] pvSetBuffer A pointer to the buffer that holds the data to be set.
* \param[in] u4SetBufferLen The length of the set buffer.
* \param[out] pu4SetInfoLen If the call is successful, returns the number of
* bytes read from the set buffer. If the call failed
* due to invalid length of the set buffer, returns
* the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_ADAPTER_NOT_READY
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidSetDisassociate(IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
P_MSG_AIS_ABORT_T prAisAbortMsg;
DEBUGFUNC("wlanoidSetDisassociate");
ASSERT(prAdapter);
ASSERT(pu4SetInfoLen);
*pu4SetInfoLen = 0;
if (prAdapter->rAcpiState == ACPI_STATE_D3) {
DBGLOG(REQ, WARN,
"Fail in set disassociate! (Adapter not ready). ACPI=D%d, Radio=%d\n",
prAdapter->rAcpiState, prAdapter->fgIsRadioOff);
return WLAN_STATUS_ADAPTER_NOT_READY;
}
/* prepare message to AIS */
prAdapter->rWifiVar.rConnSettings.fgIsConnReqIssued = FALSE;
/* Send AIS Abort Message */
prAisAbortMsg = (P_MSG_AIS_ABORT_T) cnmMemAlloc(prAdapter, RAM_TYPE_MSG, sizeof(MSG_AIS_ABORT_T));
if (!prAisAbortMsg) {
DBGLOG(REQ, ERROR, "Fail in creating AisAbortMsg.\n");
return WLAN_STATUS_FAILURE;
}
prAisAbortMsg->rMsgHdr.eMsgId = MID_OID_AIS_FSM_JOIN_REQ;
prAisAbortMsg->ucReasonOfDisconnect = DISCONNECT_REASON_CODE_NEW_CONNECTION;
prAisAbortMsg->fgDelayIndication = FALSE;
mboxSendMsg(prAdapter, MBOX_ID_0, (P_MSG_HDR_T) prAisAbortMsg, MSG_SEND_METHOD_BUF);
/* indicate for disconnection */
if (kalGetMediaStateIndicated(prAdapter->prGlueInfo) == PARAM_MEDIA_STATE_CONNECTED)
kalIndicateStatusAndComplete(prAdapter->prGlueInfo, WLAN_STATUS_MEDIA_DISCONNECT_LOCALLY, NULL, 0);
#if !defined(LINUX)
prAdapter->fgIsRadioOff = TRUE;
#endif
return WLAN_STATUS_SUCCESS;
} /* wlanoidSetDisassociate */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is used to query the power save profile.
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[out] pvQueryBuf A pointer to the buffer that holds the result of
* the query.
* \param[in] u4QueryBufLen The length of the query buffer.
* \param[out] pu4QueryInfoLen If the call is successful, returns the number of
* bytes written into the query buffer. If the call
* failed due to invalid length of the query buffer,
* returns the amount of storage needed.
*
* \return WLAN_STATUS_SUCCESS
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidQuery802dot11PowerSaveProfile(IN P_ADAPTER_T prAdapter,
IN PVOID pvQueryBuffer, IN UINT_32 u4QueryBufferLen, OUT PUINT_32 pu4QueryInfoLen)
{
DEBUGFUNC("wlanoidQuery802dot11PowerSaveProfile");
ASSERT(prAdapter);
ASSERT(pu4QueryInfoLen);
if (u4QueryBufferLen != 0) {
ASSERT(pvQueryBuffer);
/* *(PPARAM_POWER_MODE) pvQueryBuffer = (PARAM_POWER_MODE)(prAdapter->rWlanInfo.ePowerSaveMode.ucPsProfile); */
*(PPARAM_POWER_MODE) pvQueryBuffer =
(PARAM_POWER_MODE) (prAdapter->rWlanInfo.arPowerSaveMode[prAdapter->prAisBssInfo->ucBssIndex].
ucPsProfile);
*pu4QueryInfoLen = sizeof(PARAM_POWER_MODE);
/* hack for CTIA power mode setting function */
if (prAdapter->fgEnCtiaPowerMode) {
/* set to non-zero value (to prevent MMI query 0, */
/* before it intends to set 0, which will skip its following state machine) */
*(PPARAM_POWER_MODE) pvQueryBuffer = (PARAM_POWER_MODE) 2;
}
}
return WLAN_STATUS_SUCCESS;
}
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is used to set the power save profile.
*
* \param[in] pvAdapter Pointer to the Adapter structure.
* \param[in] pvSetBuffer A pointer to the buffer that holds the data to be set.
* \param[in] u4SetBufferLen The length of the set buffer.
* \param[out] pu4SetInfoLen If the call is successful, returns the number of
* bytes read from the set buffer. If the call failed
* due to invalid length of the set buffer, returns
* the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_INVALID_LENGTH
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidSet802dot11PowerSaveProfile(IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
WLAN_STATUS status;
P_PARAM_POWER_MODE_T prPowerMode;
P_BSS_INFO_T prBssInfo;
const PUINT_8 apucPsMode[Param_PowerModeMax] = {
(PUINT_8) "CAM",
(PUINT_8) "MAX PS",
(PUINT_8) "FAST PS"
};
DEBUGFUNC("wlanoidSet802dot11PowerSaveProfile");
ASSERT(prAdapter);
ASSERT(pu4SetInfoLen);
*pu4SetInfoLen = sizeof(PARAM_POWER_MODE_T);
prPowerMode = (P_PARAM_POWER_MODE_T) pvSetBuffer;
if (u4SetBufferLen < sizeof(PARAM_POWER_MODE_T)) {
DBGLOG(REQ, WARN, "Set power mode error: Invalid length %ld\n", u4SetBufferLen);
return WLAN_STATUS_INVALID_LENGTH;
} else if (prPowerMode->ePowerMode >= Param_PowerModeMax) {
DBGLOG(REQ, WARN, "Set power mode error: Invalid power mode(%u)\n", prPowerMode->ePowerMode);
return WLAN_STATUS_INVALID_DATA;
} else if (prPowerMode->ucBssIdx >= BSS_INFO_NUM) {
DBGLOG(REQ, WARN, "Set power mode error: Invalid BSS index(%u)\n", prPowerMode->ucBssIdx);
return WLAN_STATUS_INVALID_DATA;
}
prBssInfo = GET_BSS_INFO_BY_INDEX(prAdapter, prPowerMode->ucBssIdx);
if (prAdapter->fgEnCtiaPowerMode) {
if (prPowerMode->ePowerMode != Param_PowerModeCAM) {
/* User setting to PS mode (Param_PowerModeMAX_PSP or Param_PowerModeFast_PSP) */
if (prAdapter->u4CtiaPowerMode == 0)
/* force to keep in CAM mode */
prPowerMode->ePowerMode = Param_PowerModeCAM;
else if (prAdapter->u4CtiaPowerMode == 1)
prPowerMode->ePowerMode = Param_PowerModeMAX_PSP;
else if (prAdapter->u4CtiaPowerMode == 2)
prPowerMode->ePowerMode = Param_PowerModeFast_PSP;
}
}
/* only CAM mode allowed when TP/Sigma on */
if ((prAdapter->rWifiVar.ucTpTestMode == ENUM_TP_TEST_MODE_THROUGHPUT) ||
(prAdapter->rWifiVar.ucTpTestMode == ENUM_TP_TEST_MODE_SIGMA_AC_N_PMF))
prPowerMode->ePowerMode = Param_PowerModeCAM;
/* for WMM PS Sigma certification, keep WiFi in ps mode continuously */
/* force PS == Param_PowerModeMAX_PSP */
if ((prAdapter->rWifiVar.ucTpTestMode == ENUM_TP_TEST_MODE_SIGMA_WMM_PS) &&
(prPowerMode->ePowerMode >= Param_PowerModeMAX_PSP))
prPowerMode->ePowerMode = Param_PowerModeMAX_PSP;
status = nicConfigPowerSaveProfile(prAdapter, prPowerMode->ucBssIdx, prPowerMode->ePowerMode, TRUE);
if (prPowerMode->ePowerMode < Param_PowerModeMax) {
DBGLOG(INIT, INFO, "Set %s Network BSS(%u) PS mode to %s (%d)\n",
apucNetworkType[prBssInfo->eNetworkType],
prPowerMode->ucBssIdx, apucPsMode[prPowerMode->ePowerMode], prPowerMode->ePowerMode);
} else {
DBGLOG(INIT, INFO, "Invalid PS mode setting (%d) for %s Network BSS(%u)\n",
prPowerMode->ePowerMode, apucNetworkType[prBssInfo->eNetworkType], prPowerMode->ucBssIdx);
}
return status;
} /* end of wlanoidSetAcpiDevicePowerStateMode() */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to query current status of AdHoc Mode.
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[in] pvQueryBuffer Pointer to the buffer that holds the result of
* the query.
* \param[in] u4QueryBufferLen The length of the query buffer.
* \param[out] pu4QueryInfoLen If the call is successful, returns the number of
* bytes written into the query buffer. If the call
* failed due to invalid length of the query buffer,
* returns the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_BUFFER_TOO_SHORT
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidQueryAdHocMode(IN P_ADAPTER_T prAdapter,
OUT PVOID pvQueryBuffer, IN UINT_32 u4QueryBufferLen, OUT PUINT_32 pu4QueryInfoLen)
{
return WLAN_STATUS_SUCCESS;
} /* end of wlanoidQueryAdHocMode() */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to set AdHoc Mode.
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[in] pvSetBuffer Pointer to the buffer that holds the data to be set.
* \param[in] u4SetBufferLen The length of the set buffer.
* \param[out] pu4SetInfoLen If the call is successful, returns the number of
* bytes read from the set buffer. If the call failed
* due to invalid length of the set buffer, returns
* the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_INVALID_LENGTH
* \retval WLAN_STATUS_INVALID_DATA
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidSetAdHocMode(IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
return WLAN_STATUS_SUCCESS;
} /* end of wlanoidSetAdHocMode() */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to query RF frequency.
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[in] pvQueryBuffer Pointer to the buffer that holds the result of
* the query.
* \param[in] u4QueryBufferLen The length of the query buffer.
* \param[out] pu4QueryInfoLen If the call is successful, returns the number of
* bytes written into the query buffer. If the call
* failed due to invalid length of the query buffer,
* returns the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_BUFFER_TOO_SHORT
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidQueryFrequency(IN P_ADAPTER_T prAdapter,
OUT PVOID pvQueryBuffer, IN UINT_32 u4QueryBufferLen, OUT PUINT_32 pu4QueryInfoLen)
{
DEBUGFUNC("wlanoidQueryFrequency");
ASSERT(prAdapter);
ASSERT(pu4QueryInfoLen);
if (u4QueryBufferLen)
ASSERT(pvQueryBuffer);
if (u4QueryBufferLen < sizeof(UINT_32))
return WLAN_STATUS_BUFFER_TOO_SHORT;
if (prAdapter->rWifiVar.rConnSettings.eOPMode == NET_TYPE_INFRA) {
if (kalGetMediaStateIndicated(prAdapter->prGlueInfo) == PARAM_MEDIA_STATE_CONNECTED)
*(PUINT_32) pvQueryBuffer = nicChannelNum2Freq(prAdapter->prAisBssInfo->ucPrimaryChannel);
else
*(PUINT_32) pvQueryBuffer = 0;
} else
*(PUINT_32) pvQueryBuffer = nicChannelNum2Freq(prAdapter->rWifiVar.rConnSettings.ucAdHocChannelNum);
return WLAN_STATUS_SUCCESS;
} /* end of wlanoidQueryFrequency() */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to set RF frequency by User Settings.
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[in] pvQueryBuffer Pointer to the buffer that holds the result of
* the query.
* \param[in] u4QueryBufferLen The length of the query buffer.
* \param[out] pu4QueryInfoLen If the call is successful, returns the number of
* bytes written into the query buffer. If the call
* failed due to invalid length of the query buffer,
* returns the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_INVALID_LENGTH
* \retval WLAN_STATUS_INVALID_DATA
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidSetFrequency(IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
PUINT_32 pu4FreqInKHz;
DEBUGFUNC("wlanoidSetFrequency");
ASSERT(prAdapter);
ASSERT(pu4SetInfoLen);
*pu4SetInfoLen = sizeof(UINT_32);
if (u4SetBufferLen < sizeof(UINT_32))
return WLAN_STATUS_INVALID_LENGTH;
ASSERT(pvSetBuffer);
pu4FreqInKHz = (PUINT_32) pvSetBuffer;
prAdapter->rWifiVar.rConnSettings.ucAdHocChannelNum = (UINT_8) nicFreq2ChannelNum(*pu4FreqInKHz);
prAdapter->rWifiVar.rConnSettings.eAdHocBand = *pu4FreqInKHz < 5000000 ? BAND_2G4 : BAND_5G;
return WLAN_STATUS_SUCCESS;
} /* end of wlanoidSetFrequency() */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to set 802.11 channel of the radio frequency.
* This is a proprietary function call to Lunux currently.
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[in] pvSetBuffer A pointer to the buffer that holds the data to be set.
* \param[in] u4SetBufferLen The length of the set buffer.
* \param[out] pu4SetInfoLen If the call is successful, returns the number of
* bytes read from the set buffer. If the call failed
* due to invalid length of the set buffer, returns
* the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_INVALID_LENGTH
* \retval WLAN_STATUS_INVALID_DATA
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidSetChannel(IN P_ADAPTER_T prAdapter, IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
ASSERT(0); /* // */
return WLAN_STATUS_SUCCESS;
}
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to query the Beacon Interval from User Settings.
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[in] pvQueryBuffer Pointer to the buffer that holds the result of
* the query.
* \param[in] u4QueryBufferLen The length of the query buffer.
* \param[out] pu4QueryInfoLen If the call is successful, returns the number of
* bytes written into the query buffer. If the call
* failed due to invalid length of the query buffer,
* returns the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_BUFFER_TOO_SHORT
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidQueryBeaconInterval(IN P_ADAPTER_T prAdapter,
OUT PVOID pvQueryBuffer, IN UINT_32 u4QueryBufferLen, OUT PUINT_32 pu4QueryInfoLen)
{
DEBUGFUNC("wlanoidQueryBeaconInterval");
ASSERT(prAdapter);
ASSERT(pu4QueryInfoLen);
if (u4QueryBufferLen)
ASSERT(pvQueryBuffer);
*pu4QueryInfoLen = sizeof(UINT_32);
if (u4QueryBufferLen < sizeof(UINT_32))
return WLAN_STATUS_BUFFER_TOO_SHORT;
if (kalGetMediaStateIndicated(prAdapter->prGlueInfo) == PARAM_MEDIA_STATE_CONNECTED) {
if (prAdapter->rWifiVar.rConnSettings.eOPMode == NET_TYPE_INFRA)
*(PUINT_32) pvQueryBuffer = prAdapter->rWlanInfo.rCurrBssId.rConfiguration.u4BeaconPeriod;
else
*(PUINT_32) pvQueryBuffer = (UINT_32) prAdapter->rWlanInfo.u2BeaconPeriod;
} else {
if (prAdapter->rWifiVar.rConnSettings.eOPMode == NET_TYPE_INFRA)
*(PUINT_32) pvQueryBuffer = 0;
else
*(PUINT_32) pvQueryBuffer = (UINT_32) prAdapter->rWlanInfo.u2BeaconPeriod;
}
return WLAN_STATUS_SUCCESS;
} /* end of wlanoidQueryBeaconInterval() */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to set the Beacon Interval to User Settings.
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[in] pvSetBuffer Pointer to the buffer that holds the data to be set.
* \param[in] u4SetBufferLen The length of the set buffer.
* \param[out] pu4SetInfoLen If the call is successful, returns the number of
* bytes read from the set buffer. If the call failed
* due to invalid length of the set buffer, returns
* the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_INVALID_LENGTH
* \retval WLAN_STATUS_INVALID_DATA
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidSetBeaconInterval(IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
PUINT_32 pu4BeaconInterval;
DEBUGFUNC("wlanoidSetBeaconInterval");
ASSERT(prAdapter);
ASSERT(pu4SetInfoLen);
*pu4SetInfoLen = sizeof(UINT_32);
if (u4SetBufferLen < sizeof(UINT_32))
return WLAN_STATUS_INVALID_LENGTH;
ASSERT(pvSetBuffer);
pu4BeaconInterval = (PUINT_32) pvSetBuffer;
if ((*pu4BeaconInterval < DOT11_BEACON_PERIOD_MIN) || (*pu4BeaconInterval > DOT11_BEACON_PERIOD_MAX)) {
DBGLOG(REQ, TRACE, "Invalid Beacon Interval = %ld\n", *pu4BeaconInterval);
return WLAN_STATUS_INVALID_DATA;
}
prAdapter->rWlanInfo.u2BeaconPeriod = (UINT_16) *pu4BeaconInterval;
DBGLOG(REQ, INFO, "Set beacon interval: %d\n", prAdapter->rWlanInfo.u2BeaconPeriod);
return WLAN_STATUS_SUCCESS;
} /* end of wlanoidSetBeaconInterval() */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to query the ATIM window from User Settings.
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[in] pvQueryBuffer Pointer to the buffer that holds the result of
* the query.
* \param[in] u4QueryBufferLen The length of the query buffer.
* \param[out] pu4QueryInfoLen If the call is successful, returns the number of
* bytes written into the query buffer. If the call
* failed due to invalid length of the query buffer,
* returns the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_BUFFER_TOO_SHORT
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidQueryAtimWindow(IN P_ADAPTER_T prAdapter,
OUT PVOID pvQueryBuffer, IN UINT_32 u4QueryBufferLen, OUT PUINT_32 pu4QueryInfoLen)
{
DEBUGFUNC("wlanoidQueryAtimWindow");
ASSERT(prAdapter);
ASSERT(pu4QueryInfoLen);
if (u4QueryBufferLen)
ASSERT(pvQueryBuffer);
*pu4QueryInfoLen = sizeof(UINT_32);
if (u4QueryBufferLen < sizeof(UINT_32))
return WLAN_STATUS_BUFFER_TOO_SHORT;
if (prAdapter->rWifiVar.rConnSettings.eOPMode == NET_TYPE_INFRA)
*(PUINT_32) pvQueryBuffer = 0;
else
*(PUINT_32) pvQueryBuffer = (UINT_32) prAdapter->rWlanInfo.u2AtimWindow;
return WLAN_STATUS_SUCCESS;
} /* end of wlanoidQueryAtimWindow() */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to set the ATIM window to User Settings.
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[in] pvSetBuffer Pointer to the buffer that holds the data to be set.
* \param[in] u4SetBufferLen The length of the set buffer.
* \param[out] pu4SetInfoLen If the call is successful, returns the number of
* bytes read from the set buffer. If the call failed
* due to invalid length of the set buffer, returns
* the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_INVALID_LENGTH
* \retval WLAN_STATUS_INVALID_DATA
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidSetAtimWindow(IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
PUINT_32 pu4AtimWindow;
DEBUGFUNC("wlanoidSetAtimWindow");
ASSERT(prAdapter);
ASSERT(pu4SetInfoLen);
*pu4SetInfoLen = sizeof(UINT_32);
if (u4SetBufferLen < sizeof(UINT_32))
return WLAN_STATUS_INVALID_LENGTH;
ASSERT(pvSetBuffer);
pu4AtimWindow = (PUINT_32) pvSetBuffer;
prAdapter->rWlanInfo.u2AtimWindow = (UINT_16) *pu4AtimWindow;
return WLAN_STATUS_SUCCESS;
} /* end of wlanoidSetAtimWindow() */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to Set the MAC address which is currently used by the NIC.
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[in] pvSetBuffer Pointer to the buffer that holds the data to be set.
* \param[in] u4SetBufferLen The length of the set buffer.
* \param[out] pu4SetInfoLen If the call is successful, returns the number of
* bytes read from the set buffer. If the call failed
* due to invalid length of the set buffer, returns
* the amount of storage needed.
*
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_INVALID_LENGTH
* \retval WLAN_STATUS_INVALID_DATA
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidSetCurrentAddr(IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
ASSERT(0); /* // */
return WLAN_STATUS_SUCCESS;
} /* end of wlanoidSetCurrentAddr() */
#if CFG_TCP_IP_CHKSUM_OFFLOAD
/*----------------------------------------------------------------------------*/
/*!
* \brief Setting the checksum offload function.
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[in] pvSetBuffer Pointer to the buffer that holds the data to be set.
* \param[in] u4SetBufferLen The length of the set buffer.
* \param[out] pu4SetInfoLen If the call is successful, returns the number of
* bytes read from the set buffer. If the call failed
* due to invalid length of the set buffer, returns
* the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_INVALID_LENGTH
* \retval WLAN_STATUS_ADAPTER_NOT_READY
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidSetCSUMOffload(IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
UINT_32 u4CSUMFlags;
CMD_BASIC_CONFIG_T rCmdBasicConfig;
P_WIFI_VAR_T prWifiVar = &prAdapter->rWifiVar;
DEBUGFUNC("wlanoidSetCSUMOffload");
DBGLOG(INIT, LOUD, "\n");
ASSERT(prAdapter);
ASSERT(pu4SetInfoLen);
*pu4SetInfoLen = sizeof(UINT_32);
if (u4SetBufferLen < sizeof(UINT_32))
return WLAN_STATUS_INVALID_LENGTH;
ASSERT(pvSetBuffer);
u4CSUMFlags = *(PUINT_32) pvSetBuffer;
kalMemZero(&rCmdBasicConfig, sizeof(CMD_BASIC_CONFIG_T));
rCmdBasicConfig.ucNative80211 = 0; /* @FIXME: for Vista */
if (u4CSUMFlags & CSUM_OFFLOAD_EN_TX_TCP)
rCmdBasicConfig.rCsumOffload.u2TxChecksum |= BIT(2);
if (u4CSUMFlags & CSUM_OFFLOAD_EN_TX_UDP)
rCmdBasicConfig.rCsumOffload.u2TxChecksum |= BIT(1);
if (u4CSUMFlags & CSUM_OFFLOAD_EN_TX_IP)
rCmdBasicConfig.rCsumOffload.u2TxChecksum |= BIT(0);
if (u4CSUMFlags & CSUM_OFFLOAD_EN_RX_TCP)
rCmdBasicConfig.rCsumOffload.u2RxChecksum |= BIT(2);
if (u4CSUMFlags & CSUM_OFFLOAD_EN_RX_UDP)
rCmdBasicConfig.rCsumOffload.u2RxChecksum |= BIT(1);
if (u4CSUMFlags & (CSUM_OFFLOAD_EN_RX_IPv4 | CSUM_OFFLOAD_EN_RX_IPv6))
rCmdBasicConfig.rCsumOffload.u2RxChecksum |= BIT(0);
prAdapter->u4CSUMFlags = u4CSUMFlags;
rCmdBasicConfig.ucCtrlFlagAssertPath = prWifiVar->ucCtrlFlagAssertPath;
rCmdBasicConfig.ucCtrlFlagDebugLevel = prWifiVar->ucCtrlFlagDebugLevel;
wlanSendSetQueryCmd(prAdapter,
CMD_ID_BASIC_CONFIG,
TRUE,
FALSE,
TRUE,
NULL,
nicOidCmdTimeoutCommon,
sizeof(CMD_BASIC_CONFIG_T),
(PUINT_8) &rCmdBasicConfig, pvSetBuffer, u4SetBufferLen);
return WLAN_STATUS_SUCCESS;
}
#endif /* CFG_TCP_IP_CHKSUM_OFFLOAD */
/*----------------------------------------------------------------------------*/
/*!
* \brief Setting the IP address for pattern search function.
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[in] pvSetBuffer A pointer to the buffer that holds the data to be set.
* \param[in] u4SetBufferLen The length of the set buffer.
* \param[out] pu4SetInfoLen If the call is successful, returns the number of
* bytes read from the set buffer. If the call failed
* due to invalid length of the set buffer, returns
* the amount of storage needed.
*
* \return WLAN_STATUS_SUCCESS
* \return WLAN_STATUS_ADAPTER_NOT_READY
* \return WLAN_STATUS_INVALID_LENGTH
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidSetNetworkAddress(IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
WLAN_STATUS rStatus = WLAN_STATUS_SUCCESS;
UINT_32 i, u4IPv4AddrIdx;
P_CMD_SET_NETWORK_ADDRESS_LIST prCmdNetworkAddressList;
P_PARAM_NETWORK_ADDRESS_LIST prNetworkAddressList = (P_PARAM_NETWORK_ADDRESS_LIST) pvSetBuffer;
P_PARAM_NETWORK_ADDRESS prNetworkAddress;
UINT_32 u4IPv4AddrCount, u4CmdSize;
#if CFG_ENABLE_GTK_FRAME_FILTER
UINT_32 u4IpV4AddrListSize;
P_BSS_INFO_T prBssInfo = &prAdapter->rWifiVar.arBssInfoPool[KAL_NETWORK_TYPE_AIS_INDEX];
#endif
DEBUGFUNC("wlanoidSetNetworkAddress");
DBGLOG(INIT, LOUD, "\n");
ASSERT(prAdapter);
ASSERT(pu4SetInfoLen);
*pu4SetInfoLen = 4;
if (u4SetBufferLen < OFFSET_OF(PARAM_NETWORK_ADDRESS_LIST, arAddress))
return WLAN_STATUS_INVALID_DATA;
*pu4SetInfoLen = 0;
u4IPv4AddrCount = 0;
/* 4 <1.1> Get IPv4 address count */
/* We only suppot IPv4 address setting */
prNetworkAddress = prNetworkAddressList->arAddress;
for (i = 0; i < prNetworkAddressList->u4AddressCount; i++) {
if ((prNetworkAddress->u2AddressType == PARAM_PROTOCOL_ID_TCP_IP) &&
(prNetworkAddress->u2AddressLength == IPV4_ADDR_LEN)) {
u4IPv4AddrCount++;
}
prNetworkAddress = (P_PARAM_NETWORK_ADDRESS) ((ULONG) prNetworkAddress +
(ULONG) (prNetworkAddress->u2AddressLength +
OFFSET_OF(PARAM_NETWORK_ADDRESS, aucAddress)));
}
/* 4 <2> Calculate command buffer size */
/* construct payload of command packet */
if (u4IPv4AddrCount == 0)
u4CmdSize = sizeof(CMD_SET_NETWORK_ADDRESS_LIST);
else
u4CmdSize = OFFSET_OF(CMD_SET_NETWORK_ADDRESS_LIST, arNetAddress) +
(sizeof(IPV4_NETWORK_ADDRESS) * u4IPv4AddrCount);
/* 4 <3> Allocate command buffer */
prCmdNetworkAddressList = (P_CMD_SET_NETWORK_ADDRESS_LIST) kalMemAlloc(u4CmdSize, VIR_MEM_TYPE);
if (prCmdNetworkAddressList == NULL)
return WLAN_STATUS_FAILURE;
#if CFG_ENABLE_GTK_FRAME_FILTER
u4IpV4AddrListSize = OFFSET_OF(IPV4_NETWORK_ADDRESS_LIST, arNetAddr) +
(u4IPv4AddrCount * sizeof(IPV4_NETWORK_ADDRESS));
if (prBssInfo->prIpV4NetAddrList)
FREE_IPV4_NETWORK_ADDR_LIST(prBssInfo->prIpV4NetAddrList);
prBssInfo->prIpV4NetAddrList = (P_IPV4_NETWORK_ADDRESS_LIST) kalMemAlloc(u4IpV4AddrListSize, VIR_MEM_TYPE);
prBssInfo->prIpV4NetAddrList->ucAddrCount = (UINT_8) u4IPv4AddrCount;
#endif
/* 4 <4> Fill P_CMD_SET_NETWORK_ADDRESS_LIST */
prCmdNetworkAddressList->ucBssIndex = prNetworkAddressList->ucBssIdx;
/* only to set IP address to FW once ARP filter is enabled */
if (prAdapter->fgEnArpFilter) {
prCmdNetworkAddressList->ucAddressCount = (UINT_8) u4IPv4AddrCount;
prNetworkAddress = prNetworkAddressList->arAddress;
/* DBGLOG(INIT, INFO, ("%s: u4IPv4AddrCount (%lu)\n", __FUNCTION__, u4IPv4AddrCount)); */
for (i = 0, u4IPv4AddrIdx = 0; i < prNetworkAddressList->u4AddressCount; i++) {
if (prNetworkAddress->u2AddressType == PARAM_PROTOCOL_ID_TCP_IP &&
prNetworkAddress->u2AddressLength == IPV4_ADDR_LEN) {
kalMemCopy(prCmdNetworkAddressList->arNetAddress[u4IPv4AddrIdx].aucIpAddr,
prNetworkAddress->aucAddress, sizeof(UINT_32));
#if CFG_ENABLE_GTK_FRAME_FILTER
kalMemCopy(prBssInfo->prIpV4NetAddrList->arNetAddr[u4IPv4AddrIdx].aucIpAddr,
prNetworkAddress->aucAddress, sizeof(UINT_32));
#endif
DBGLOG(INIT, INFO,
"%s: IPv4 Addr [%u][" IPV4STR "]\n", __func__,
u4IPv4AddrIdx, IPV4TOSTR(prNetworkAddress->aucAddress));
u4IPv4AddrIdx++;
}
prNetworkAddress = (P_PARAM_NETWORK_ADDRESS) ((ULONG) prNetworkAddress +
(ULONG) (prNetworkAddress->u2AddressLength +
OFFSET_OF(PARAM_NETWORK_ADDRESS,
aucAddress)));
}
} else {
prCmdNetworkAddressList->ucAddressCount = 0;
}
DBGLOG(INIT, INFO,
"%s: Set %lu IPv4 address for BSS[%u]\n", __func__, u4IPv4AddrCount,
prCmdNetworkAddressList->ucBssIndex);
/* 4 <5> Send command */
rStatus = wlanSendSetQueryCmd(prAdapter,
CMD_ID_SET_IP_ADDRESS,
TRUE,
FALSE,
TRUE,
nicCmdEventSetIpAddress,
nicOidCmdTimeoutCommon,
u4CmdSize, (PUINT_8) prCmdNetworkAddressList, pvSetBuffer, u4SetBufferLen);
kalMemFree(prCmdNetworkAddressList, VIR_MEM_TYPE, u4CmdSize);
return rStatus;
}
/*----------------------------------------------------------------------------*/
/*!
* \brief Set driver to switch into RF test mode
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[in] pvSetBuffer A pointer to the buffer that holds the data to be set,
* should be NULL
* \param[in] u4SetBufferLen The length of the set buffer, should be 0
* \param[out] pu4SetInfoLen If the call is successful, returns the number of
* bytes read from the set buffer. If the call failed
* due to invalid length of the set buffer, returns
* the amount of storage needed.
*
* \return WLAN_STATUS_SUCCESS
* \return WLAN_STATUS_ADAPTER_NOT_READY
* \return WLAN_STATUS_INVALID_DATA
* \return WLAN_STATUS_INVALID_LENGTH
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidRftestSetTestMode(IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
WLAN_STATUS rStatus;
CMD_TEST_CTRL_T rCmdTestCtrl;
DEBUGFUNC("wlanoidRftestSetTestMode");
ASSERT(prAdapter);
ASSERT(pu4SetInfoLen);
*pu4SetInfoLen = 0;
if (u4SetBufferLen == 0) {
if ((prAdapter->fgTestMode == FALSE)
|| (prAdapter->fgIcapMode == TRUE)) {
/* switch to RF Test mode */
rCmdTestCtrl.ucAction = 0; /* Switch mode */
rCmdTestCtrl.u.u4OpMode = 1; /* RF test mode */
rStatus = wlanSendSetQueryCmd(prAdapter,
CMD_ID_TEST_CTRL,
TRUE,
FALSE,
TRUE,
nicCmdEventEnterRfTest,
nicOidCmdEnterRFTestTimeout,
sizeof(CMD_TEST_CTRL_T),
(PUINT_8) &rCmdTestCtrl, pvSetBuffer, u4SetBufferLen);
} else {
/* already in test mode .. */
rStatus = WLAN_STATUS_SUCCESS;
}
} else {
rStatus = WLAN_STATUS_INVALID_DATA;
}
return rStatus;
}
/*----------------------------------------------------------------------------*/
/*!
* \brief Set driver to switch into RF test ICAP mode
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[in] pvSetBuffer A pointer to the buffer that holds the data to be set,
* should be NULL
* \param[in] u4SetBufferLen The length of the set buffer, should be 0
* \param[out] pu4SetInfoLen If the call is successful, returns the number of
* bytes read from the set buffer. If the call failed
* due to invalid length of the set buffer, returns
* the amount of storage needed.
*
* \return WLAN_STATUS_SUCCESS
* \return WLAN_STATUS_ADAPTER_NOT_READY
* \return WLAN_STATUS_INVALID_DATA
* \return WLAN_STATUS_INVALID_LENGTH
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidRftestSetTestIcapMode(IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
WLAN_STATUS rStatus;
CMD_TEST_CTRL_T rCmdTestCtrl;
DEBUGFUNC("wlanoidRftestSetTestIcapMode");
ASSERT(prAdapter);
ASSERT(pu4SetInfoLen);
*pu4SetInfoLen = 0;
if (u4SetBufferLen == 0) {
if (prAdapter->fgIcapMode == FALSE) {
/* switch to RF Test mode */
rCmdTestCtrl.ucAction = 0; /* Switch mode */
rCmdTestCtrl.u.u4OpMode = 2; /* RF test mode */
rStatus = wlanSendSetQueryCmd(prAdapter,
CMD_ID_TEST_CTRL,
TRUE,
FALSE,
TRUE,
nicCmdEventEnterRfTest,
nicOidCmdEnterRFTestTimeout,
sizeof(CMD_TEST_CTRL_T),
(PUINT_8) &rCmdTestCtrl, pvSetBuffer, u4SetBufferLen);
} else {
/* already in ICAP mode .. */
rStatus = WLAN_STATUS_SUCCESS;
}
} else {
rStatus = WLAN_STATUS_INVALID_DATA;
}
return rStatus;
}
/*----------------------------------------------------------------------------*/
/*!
* \brief Set driver to switch into normal operation mode from RF test mode
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[in] pvSetBuffer A pointer to the buffer that holds the data to be set
* should be NULL
* \param[in] u4SetBufferLen The length of the set buffer, should be 0
* \param[out] pu4SetInfoLen If the call is successful, returns the number of
* bytes read from the set buffer. If the call failed
* due to invalid length of the set buffer, returns
* the amount of storage needed.
*
* \return WLAN_STATUS_SUCCESS
* \return WLAN_STATUS_ADAPTER_NOT_READY
* \return WLAN_STATUS_INVALID_DATA
* \return WLAN_STATUS_INVALID_LENGTH
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidRftestSetAbortTestMode(IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
WLAN_STATUS rStatus;
CMD_TEST_CTRL_T rCmdTestCtrl;
DEBUGFUNC("wlanoidRftestSetAbortTestMode");
ASSERT(prAdapter);
ASSERT(pu4SetInfoLen);
*pu4SetInfoLen = 0;
if (u4SetBufferLen == 0) {
if (prAdapter->fgTestMode == TRUE) {
/* switch to normal mode */
rCmdTestCtrl.ucAction = 0; /* Switch mode */
rCmdTestCtrl.u.u4OpMode = 0; /* normal mode */
rStatus = wlanSendSetQueryCmd(prAdapter,
CMD_ID_TEST_CTRL,
TRUE,
FALSE,
TRUE,
nicCmdEventLeaveRfTest,
nicOidCmdTimeoutCommon,
sizeof(CMD_TEST_CTRL_T),
(PUINT_8) &rCmdTestCtrl, pvSetBuffer, u4SetBufferLen);
} else {
/* already in normal mode .. */
rStatus = WLAN_STATUS_SUCCESS;
}
} else {
rStatus = WLAN_STATUS_INVALID_DATA;
}
return rStatus;
}
/*----------------------------------------------------------------------------*/
/*!
* \brief query for RF test parameter
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[in] pvQueryBuffer Pointer to the buffer that holds the result of
* the query.
* \param[in] u4QueryBufferLen The length of the query buffer.
* \param[out] pu4QueryInfoLen If the call is successful, returns the number of
* bytes written into the query buffer. If the call
* failed due to invalid length of the query buffer,
* returns the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_BUFFER_TOO_SHORT
* \retval WLAN_STATUS_NOT_SUPPORTED
* \retval WLAN_STATUS_NOT_ACCEPTED
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidRftestQueryAutoTest(IN P_ADAPTER_T prAdapter,
OUT PVOID pvQueryBuffer, IN UINT_32 u4QueryBufferLen, OUT PUINT_32 pu4QueryInfoLen)
{
P_PARAM_MTK_WIFI_TEST_STRUCT_T prRfATInfo;
WLAN_STATUS rStatus = WLAN_STATUS_SUCCESS;
DEBUGFUNC("wlanoidRftestQueryAutoTest");
ASSERT(prAdapter);
if (u4QueryBufferLen)
ASSERT(pvQueryBuffer);
ASSERT(pu4QueryInfoLen);
*pu4QueryInfoLen = sizeof(PARAM_MTK_WIFI_TEST_STRUCT_T);
if (u4QueryBufferLen != sizeof(PARAM_MTK_WIFI_TEST_STRUCT_T)) {
DBGLOG(REQ, ERROR, "Invalid data. QueryBufferLen: %ld.\n", u4QueryBufferLen);
return WLAN_STATUS_INVALID_LENGTH;
}
prRfATInfo = (P_PARAM_MTK_WIFI_TEST_STRUCT_T) pvQueryBuffer;
rStatus = rftestQueryATInfo(prAdapter,
prRfATInfo->u4FuncIndex, prRfATInfo->u4FuncData, pvQueryBuffer, u4QueryBufferLen);
return rStatus;
}
/*----------------------------------------------------------------------------*/
/*!
* \brief Set RF test parameter
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[in] pvSetBuffer A pointer to the buffer that holds the data to be set.
* \param[in] u4SetBufferLen The length of the set buffer.
* \param[out] pu4SetInfoLen If the call is successful, returns the number of
* bytes read from the set buffer. If the call failed
* due to invalid length of the set buffer, returns
* the amount of storage needed.
*
* \return WLAN_STATUS_SUCCESS
* \return WLAN_STATUS_ADAPTER_NOT_READY
* \return WLAN_STATUS_INVALID_LENGTH
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidRftestSetAutoTest(IN P_ADAPTER_T prAdapter,
OUT PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
P_PARAM_MTK_WIFI_TEST_STRUCT_T prRfATInfo;
WLAN_STATUS rStatus = WLAN_STATUS_SUCCESS;
DEBUGFUNC("wlanoidRftestSetAutoTest");
ASSERT(prAdapter);
ASSERT(pvSetBuffer);
ASSERT(pu4SetInfoLen);
*pu4SetInfoLen = sizeof(PARAM_MTK_WIFI_TEST_STRUCT_T);
if (u4SetBufferLen != sizeof(PARAM_MTK_WIFI_TEST_STRUCT_T)) {
DBGLOG(REQ, ERROR, "Invalid data. SetBufferLen: %ld.\n", u4SetBufferLen);
return WLAN_STATUS_INVALID_LENGTH;
}
prRfATInfo = (P_PARAM_MTK_WIFI_TEST_STRUCT_T) pvSetBuffer;
rStatus = rftestSetATInfo(prAdapter, prRfATInfo->u4FuncIndex, prRfATInfo->u4FuncData);
return rStatus;
}
/* RF test OID set handler */
WLAN_STATUS rftestSetATInfo(IN P_ADAPTER_T prAdapter, UINT_32 u4FuncIndex, UINT_32 u4FuncData)
{
P_GLUE_INFO_T prGlueInfo;
P_CMD_INFO_T prCmdInfo;
P_WIFI_CMD_T prWifiCmd;
P_CMD_TEST_CTRL_T pCmdTestCtrl;
UINT_8 ucCmdSeqNum;
ASSERT(prAdapter);
prGlueInfo = prAdapter->prGlueInfo;
prCmdInfo = cmdBufAllocateCmdInfo(prAdapter, (CMD_HDR_SIZE + sizeof(CMD_TEST_CTRL_T)));
if (!prCmdInfo) {
DBGLOG(INIT, ERROR, "Allocate CMD_INFO_T ==> FAILED.\n");
return WLAN_STATUS_FAILURE;
}
/* increase command sequence number */
ucCmdSeqNum = nicIncreaseCmdSeqNum(prAdapter);
/* Setup common CMD Info Packet */
prCmdInfo->eCmdType = COMMAND_TYPE_GENERAL_IOCTL;
prCmdInfo->u2InfoBufLen = CMD_HDR_SIZE + sizeof(CMD_TEST_CTRL_T);
prCmdInfo->pfCmdDoneHandler = nicCmdEventSetCommon;
prCmdInfo->pfCmdTimeoutHandler = nicOidCmdTimeoutCommon;
prCmdInfo->fgIsOid = TRUE;
prCmdInfo->ucCID = CMD_ID_TEST_CTRL;
prCmdInfo->fgSetQuery = TRUE;
prCmdInfo->fgNeedResp = FALSE;
prCmdInfo->ucCmdSeqNum = ucCmdSeqNum;
prCmdInfo->u4SetInfoLen = sizeof(CMD_TEST_CTRL_T);
prCmdInfo->pvInformationBuffer = NULL;
prCmdInfo->u4InformationBufferLength = 0;
/* Setup WIFI_CMD_T (payload = CMD_TEST_CTRL_T) */
prWifiCmd = (P_WIFI_CMD_T) (prCmdInfo->pucInfoBuffer);
prWifiCmd->u2TxByteCount = prCmdInfo->u2InfoBufLen;
prWifiCmd->u2PQ_ID = CMD_PQ_ID;
prWifiCmd->ucPktTypeID = CMD_PACKET_TYPE_ID;
prWifiCmd->ucCID = prCmdInfo->ucCID;
prWifiCmd->ucSetQuery = prCmdInfo->fgSetQuery;
prWifiCmd->ucSeqNum = prCmdInfo->ucCmdSeqNum;
pCmdTestCtrl = (P_CMD_TEST_CTRL_T) (prWifiCmd->aucBuffer);
pCmdTestCtrl->ucAction = 1; /* Set ATInfo */
pCmdTestCtrl->u.rRfATInfo.u4FuncIndex = u4FuncIndex;
pCmdTestCtrl->u.rRfATInfo.u4FuncData = u4FuncData;
if ((u4FuncIndex == RF_AT_FUNCID_COMMAND) && (u4FuncData == RF_AT_COMMAND_ICAP)) {
g_bIcapEnable = TRUE;
g_bCaptureDone = FALSE;
}
/* ICAP dump name Reset */
if ((u4FuncIndex == RF_AT_FUNCID_COMMAND) && (u4FuncData == RF_AT_COMMAND_RESET_DUMP_NAME))
g_u2DumpIndex = 0;
/* insert into prCmdQueue */
kalEnqueueCommand(prGlueInfo, (P_QUE_ENTRY_T) prCmdInfo);
/* wakeup txServiceThread later */
GLUE_SET_EVENT(prAdapter->prGlueInfo);
return WLAN_STATUS_PENDING;
}
WLAN_STATUS
rftestQueryATInfo(IN P_ADAPTER_T prAdapter,
UINT_32 u4FuncIndex, UINT_32 u4FuncData, OUT PVOID pvQueryBuffer, IN UINT_32 u4QueryBufferLen)
{
P_GLUE_INFO_T prGlueInfo;
P_CMD_INFO_T prCmdInfo;
P_WIFI_CMD_T prWifiCmd;
P_CMD_TEST_CTRL_T pCmdTestCtrl;
UINT_8 ucCmdSeqNum;
P_EVENT_TEST_STATUS prTestStatus;
ASSERT(prAdapter);
prGlueInfo = prAdapter->prGlueInfo;
if (u4FuncIndex == RF_AT_FUNCID_FW_INFO) {
/* driver implementation */
prTestStatus = (P_EVENT_TEST_STATUS) pvQueryBuffer;
prTestStatus->rATInfo.u4FuncData =
(prAdapter->rVerInfo.u2FwProductID << 16) | (prAdapter->rVerInfo.u2FwOwnVersion);
u4QueryBufferLen = sizeof(EVENT_TEST_STATUS);
return WLAN_STATUS_SUCCESS;
} else if (u4FuncIndex == RF_AT_FUNCID_DRV_INFO) {
/* driver implementation */
prTestStatus = (P_EVENT_TEST_STATUS) pvQueryBuffer;
prTestStatus->rATInfo.u4FuncData = CFG_DRV_OWN_VERSION;
u4QueryBufferLen = sizeof(EVENT_TEST_STATUS);
return WLAN_STATUS_SUCCESS;
} else if (u4FuncIndex == RF_AT_FUNCID_QUERY_ICAP_DUMP_FILE) {
/* driver implementation */
prTestStatus = (P_EVENT_TEST_STATUS) pvQueryBuffer;
prTestStatus->rATInfo.u4FuncData = g_u2DumpIndex;
u4QueryBufferLen = sizeof(EVENT_TEST_STATUS);
return WLAN_STATUS_SUCCESS;
}
prCmdInfo = cmdBufAllocateCmdInfo(prAdapter, (CMD_HDR_SIZE + sizeof(CMD_TEST_CTRL_T)));
if (!prCmdInfo) {
DBGLOG(INIT, ERROR, "Allocate CMD_INFO_T ==> FAILED.\n");
return WLAN_STATUS_FAILURE;
}
/* increase command sequence number */
ucCmdSeqNum = nicIncreaseCmdSeqNum(prAdapter);
/* Setup common CMD Info Packet */
prCmdInfo->eCmdType = COMMAND_TYPE_GENERAL_IOCTL;
prCmdInfo->u2InfoBufLen = CMD_HDR_SIZE + sizeof(CMD_TEST_CTRL_T);
prCmdInfo->pfCmdDoneHandler = nicCmdEventQueryRfTestATInfo;
prCmdInfo->pfCmdTimeoutHandler = nicOidCmdTimeoutCommon;
prCmdInfo->fgIsOid = TRUE;
prCmdInfo->ucCID = CMD_ID_TEST_CTRL;
prCmdInfo->fgSetQuery = FALSE;
prCmdInfo->fgNeedResp = TRUE;
prCmdInfo->ucCmdSeqNum = ucCmdSeqNum;
prCmdInfo->u4SetInfoLen = sizeof(CMD_TEST_CTRL_T);
prCmdInfo->pvInformationBuffer = pvQueryBuffer;
prCmdInfo->u4InformationBufferLength = u4QueryBufferLen;
/* Setup WIFI_CMD_T (payload = CMD_TEST_CTRL_T) */
prWifiCmd = (P_WIFI_CMD_T) (prCmdInfo->pucInfoBuffer);
prWifiCmd->u2TxByteCount = prCmdInfo->u2InfoBufLen;
prWifiCmd->u2PQ_ID = CMD_PQ_ID;
prWifiCmd->ucPktTypeID = CMD_PACKET_TYPE_ID;
prWifiCmd->ucCID = prCmdInfo->ucCID;
prWifiCmd->ucSetQuery = prCmdInfo->fgSetQuery;
prWifiCmd->ucSeqNum = prCmdInfo->ucCmdSeqNum;
pCmdTestCtrl = (P_CMD_TEST_CTRL_T) (prWifiCmd->aucBuffer);
pCmdTestCtrl->ucAction = 2; /* Get ATInfo */
pCmdTestCtrl->u.rRfATInfo.u4FuncIndex = u4FuncIndex;
pCmdTestCtrl->u.rRfATInfo.u4FuncData = u4FuncData;
/* insert into prCmdQueue */
kalEnqueueCommand(prGlueInfo, (P_QUE_ENTRY_T) prCmdInfo);
/* wakeup txServiceThread later */
GLUE_SET_EVENT(prAdapter->prGlueInfo);
return WLAN_STATUS_PENDING;
}
WLAN_STATUS rftestSetFrequency(IN P_ADAPTER_T prAdapter, IN UINT_32 u4FreqInKHz, IN PUINT_32 pu4SetInfoLen)
{
CMD_TEST_CTRL_T rCmdTestCtrl;
ASSERT(prAdapter);
rCmdTestCtrl.ucAction = 5; /* Set Channel Frequency */
rCmdTestCtrl.u.u4ChannelFreq = u4FreqInKHz;
return wlanSendSetQueryCmd(prAdapter,
CMD_ID_TEST_CTRL,
TRUE,
FALSE,
TRUE,
nicCmdEventSetCommon,
nicOidCmdTimeoutCommon, sizeof(CMD_TEST_CTRL_T), (PUINT_8) &rCmdTestCtrl, NULL, 0);
}
/*----------------------------------------------------------------------------*/
/*!
* \brief command packet generation utility
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[in] ucCID Command ID
* \param[in] fgSetQuery Set or Query
* \param[in] fgNeedResp Need for response
* \param[in] pfCmdDoneHandler Function pointer when command is done
* \param[in] u4SetQueryInfoLen The length of the set/query buffer
* \param[in] pucInfoBuffer Pointer to set/query buffer
*
*
* \retval WLAN_STATUS_PENDING
* \retval WLAN_STATUS_FAILURE
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanSendSetQueryCmd(IN P_ADAPTER_T prAdapter,
UINT_8 ucCID,
BOOLEAN fgSetQuery,
BOOLEAN fgNeedResp,
BOOLEAN fgIsOid,
PFN_CMD_DONE_HANDLER pfCmdDoneHandler,
PFN_CMD_TIMEOUT_HANDLER pfCmdTimeoutHandler,
UINT_32 u4SetQueryInfoLen,
PUINT_8 pucInfoBuffer, OUT PVOID pvSetQueryBuffer, IN UINT_32 u4SetQueryBufferLen)
{
P_GLUE_INFO_T prGlueInfo;
P_CMD_INFO_T prCmdInfo;
P_WIFI_CMD_T prWifiCmd;
UINT_8 ucCmdSeqNum;
prGlueInfo = prAdapter->prGlueInfo;
prCmdInfo = cmdBufAllocateCmdInfo(prAdapter, (CMD_HDR_SIZE + u4SetQueryInfoLen));
DEBUGFUNC("wlanSendSetQueryCmd");
if (!prCmdInfo) {
DBGLOG(INIT, ERROR, "Allocate CMD_INFO_T ==> FAILED.\n");
return WLAN_STATUS_FAILURE;
}
/* increase command sequence number */
ucCmdSeqNum = nicIncreaseCmdSeqNum(prAdapter);
DBGLOG(REQ, TRACE, "ucCmdSeqNum =%d\n", ucCmdSeqNum);
/* Setup common CMD Info Packet */
prCmdInfo->eCmdType = COMMAND_TYPE_NETWORK_IOCTL;
prCmdInfo->u2InfoBufLen = (UINT_16) (CMD_HDR_SIZE + u4SetQueryInfoLen);
prCmdInfo->pfCmdDoneHandler = pfCmdDoneHandler;
prCmdInfo->pfCmdTimeoutHandler = pfCmdTimeoutHandler;
prCmdInfo->fgIsOid = fgIsOid;
prCmdInfo->ucCID = ucCID;
prCmdInfo->fgSetQuery = fgSetQuery;
prCmdInfo->fgNeedResp = fgNeedResp;
prCmdInfo->ucCmdSeqNum = ucCmdSeqNum;
prCmdInfo->u4SetInfoLen = u4SetQueryInfoLen;
prCmdInfo->pvInformationBuffer = pvSetQueryBuffer;
prCmdInfo->u4InformationBufferLength = u4SetQueryBufferLen;
/* Setup WIFI_CMD_T (no payload) */
prWifiCmd = (P_WIFI_CMD_T) (prCmdInfo->pucInfoBuffer);
prWifiCmd->u2TxByteCount = prCmdInfo->u2InfoBufLen;
prWifiCmd->u2PQ_ID = CMD_PQ_ID;
prWifiCmd->u2Length = prCmdInfo->u2InfoBufLen - (UINT_16) OFFSET_OF(WIFI_CMD_T, u2Length);
prWifiCmd->u2PqId = CMD_PQ_ID;
prWifiCmd->ucPktTypeID = CMD_PACKET_TYPE_ID;
prWifiCmd->ucCID = prCmdInfo->ucCID;
prWifiCmd->ucSetQuery = prCmdInfo->fgSetQuery;
prWifiCmd->ucSeqNum = prCmdInfo->ucCmdSeqNum;
if (u4SetQueryInfoLen > 0 && pucInfoBuffer != NULL)
kalMemCopy(prWifiCmd->aucBuffer, pucInfoBuffer, u4SetQueryInfoLen);
/* insert into prCmdQueue */
kalEnqueueCommand(prGlueInfo, (P_QUE_ENTRY_T) prCmdInfo);
/* wakeup txServiceThread later */
GLUE_SET_EVENT(prGlueInfo);
return WLAN_STATUS_PENDING;
}
#if CFG_SUPPORT_WAPI
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called by WAPI ui to set wapi mode, which is needed to info the the driver
* to operation at WAPI mode while driver initialize.
*
* \param[in] prAdapter Pointer to the Adapter structure
* \param[in] pvSetBuffer A pointer to the buffer that holds the data to be set
* \param[in] u4SetBufferLen The length of the set buffer
* \param[out] pu4SetInfoLen If the call is successful, returns the number of
* bytes read from the set buffer. If the call failed due to invalid length of
* the set buffer, returns the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_INVALID_DATA If new setting value is wrong.
* \retval WLAN_STATUS_INVALID_LENGTH
*
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidSetWapiMode(IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
DEBUGFUNC("wlanoidSetWapiMode");
DBGLOG(REQ, LOUD, "\r\n");
ASSERT(prAdapter);
ASSERT(pu4SetInfoLen);
ASSERT(pvSetBuffer);
/* Todo:: For support WAPI and Wi-Fi at same driver, use the set wapi assoc ie at the check point */
/* The Adapter Connection setting fgUseWapi will cleat whil oid set mode (infra), */
/* And set fgUseWapi True while set wapi assoc ie */
/* policay selection, add key all depend on this flag, */
/* The fgUseWapi may remove later */
if (*(PUINT_32) pvSetBuffer)
prAdapter->fgUseWapi = TRUE;
else
prAdapter->fgUseWapi = FALSE;
#if 0
prCmdInfo = cmdBufAllocateCmdInfo(prAdapter, (CMD_HDR_SIZE + 4));
if (!prCmdInfo) {
DBGLOG(INIT, ERROR, "Allocate CMD_INFO_T ==> FAILED.\n");
return WLAN_STATUS_FAILURE;
}
/* increase command sequence number */
ucCmdSeqNum = nicIncreaseCmdSeqNum(prAdapter);
/* compose CMD_BUILD_CONNECTION cmd pkt */
prCmdInfo->eCmdType = COMMAND_TYPE_NETWORK_IOCTL;
prCmdInfo->ucBssIndex = prAdapter->prAisBssInfo->ucBssIndex;
prCmdInfo->u2InfoBufLen = CMD_HDR_SIZE + 4;
prCmdInfo->pfCmdDoneHandler = nicCmdEventSetCommon;
prCmdInfo->pfCmdTimeoutHandler = NULL;
prCmdInfo->fgIsOid = TRUE;
prCmdInfo->ucCID = CMD_ID_WAPI_MODE;
prCmdInfo->fgSetQuery = TRUE;
prCmdInfo->fgNeedResp = FALSE;
prCmdInfo->fgDriverDomainMCR = FALSE;
prCmdInfo->ucCmdSeqNum = ucCmdSeqNum;
prCmdInfo->u4SetInfoLen = u4SetBufferLen;
prCmdInfo->pvInformationBuffer = pvSetBuffer;
prCmdInfo->u4InformationBufferLength = u4SetBufferLen;
/* Setup WIFI_CMD_T */
prWifiCmd = (P_WIFI_CMD_T) (prCmdInfo->pucInfoBuffer);
prWifiCmd->u2TxByteCount = prCmdInfo->u2InfoBufLen;
prWifiCmd->u2PQ_ID = CMD_PQ_ID;
prWifiCmd->ucPktTypeID = CMD_PACKET_TYPE_ID;
prWifiCmd->ucCID = prCmdInfo->ucCID;
prWifiCmd->ucSetQuery = prCmdInfo->fgSetQuery;
prWifiCmd->ucSeqNum = prCmdInfo->ucCmdSeqNum;
cp = (PUINT_8) (prWifiCmd->aucBuffer);
kalMemCopy(cp, (PUINT_8) pvSetBuffer, 4);
/* insert into prCmdQueue */
kalEnqueueCommand(prGlueInfo, (P_QUE_ENTRY_T) prCmdInfo);
/* wakeup txServiceThread later */
GLUE_SET_EVENT(prGlueInfo);
return WLAN_STATUS_PENDING;
#else
return WLAN_STATUS_SUCCESS;
#endif
}
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called by WAPI to set the assoc info, which is needed to add to
* Association request frame while join WAPI AP.
*
* \param[in] prAdapter Pointer to the Adapter structure
* \param[in] pvSetBuffer A pointer to the buffer that holds the data to be set
* \param[in] u4SetBufferLen The length of the set buffer
* \param[out] pu4SetInfoLen If the call is successful, returns the number of
* bytes read from the set buffer. If the call failed due to invalid length of
* the set buffer, returns the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_INVALID_DATA If new setting value is wrong.
* \retval WLAN_STATUS_INVALID_LENGTH
*
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidSetWapiAssocInfo(IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
P_WAPI_INFO_ELEM_T prWapiInfo;
PUINT_8 cp;
UINT_16 u2AuthSuiteCount = 0;
UINT_16 u2PairSuiteCount = 0;
UINT_32 u4AuthKeyMgtSuite = 0;
UINT_32 u4PairSuite = 0;
UINT_32 u4GroupSuite = 0;
UINT_16 u2IeLength = 0;
ASSERT(prAdapter);
ASSERT(pvSetBuffer);
ASSERT(pu4SetInfoLen);
DEBUGFUNC("wlanoidSetWapiAssocInfo");
DBGLOG(REQ, LOUD, "\r\n");
prAdapter->rWifiVar.rConnSettings.fgWapiMode = FALSE;
if (u4SetBufferLen < 20 /* From EID to Group cipher */)
return WLAN_STATUS_INVALID_LENGTH;
if (!wextSrchDesiredWAPIIE((PUINT_8) pvSetBuffer, u4SetBufferLen, (PUINT_8 *) &prWapiInfo))
return WLAN_STATUS_INVALID_LENGTH;
if (!prWapiInfo || prWapiInfo->ucLength < 18)
return WLAN_STATUS_INVALID_LENGTH;
u2IeLength = prWapiInfo->ucLength + 2;
/* Skip Version check */
cp = (PUINT_8) &prWapiInfo->u2AuthKeyMgtSuiteCount;
WLAN_GET_FIELD_16(cp, &u2AuthSuiteCount);
if (u2AuthSuiteCount > 1)
return WLAN_STATUS_INVALID_LENGTH;
cp += 2;
WLAN_GET_FIELD_32(cp, &u4AuthKeyMgtSuite);
DBGLOG(SEC, TRACE, "WAPI: Assoc Info auth mgt suite [%d]: %02x-%02x-%02x-%02x\n",
u2AuthSuiteCount,
(UCHAR) (u4AuthKeyMgtSuite & 0x000000FF),
(UCHAR) ((u4AuthKeyMgtSuite >> 8) & 0x000000FF),
(UCHAR) ((u4AuthKeyMgtSuite >> 16) & 0x000000FF), (UCHAR) ((u4AuthKeyMgtSuite >> 24) & 0x000000FF));
if (u4AuthKeyMgtSuite != WAPI_AKM_SUITE_802_1X && u4AuthKeyMgtSuite != WAPI_AKM_SUITE_PSK)
ASSERT(FALSE);
cp += 4;
WLAN_GET_FIELD_16(cp, &u2PairSuiteCount);
if (u2PairSuiteCount > 1)
return WLAN_STATUS_INVALID_LENGTH;
cp += 2;
WLAN_GET_FIELD_32(cp, &u4PairSuite);
DBGLOG(SEC, TRACE, "WAPI: Assoc Info pairwise cipher suite [%d]: %02x-%02x-%02x-%02x\n",
u2PairSuiteCount,
(UCHAR) (u4PairSuite & 0x000000FF),
(UCHAR) ((u4PairSuite >> 8) & 0x000000FF),
(UCHAR) ((u4PairSuite >> 16) & 0x000000FF), (UCHAR) ((u4PairSuite >> 24) & 0x000000FF));
if (u4PairSuite != WAPI_CIPHER_SUITE_WPI)
ASSERT(FALSE);
cp += 4;
WLAN_GET_FIELD_32(cp, &u4GroupSuite);
DBGLOG(SEC, TRACE, "WAPI: Assoc Info group cipher suite : %02x-%02x-%02x-%02x\n",
(UCHAR) (u4GroupSuite & 0x000000FF),
(UCHAR) ((u4GroupSuite >> 8) & 0x000000FF),
(UCHAR) ((u4GroupSuite >> 16) & 0x000000FF), (UCHAR) ((u4GroupSuite >> 24) & 0x000000FF));
if (u4GroupSuite != WAPI_CIPHER_SUITE_WPI)
ASSERT(FALSE);
prAdapter->rWifiVar.rConnSettings.u4WapiSelectedAKMSuite = u4AuthKeyMgtSuite;
prAdapter->rWifiVar.rConnSettings.u4WapiSelectedPairwiseCipher = u4PairSuite;
prAdapter->rWifiVar.rConnSettings.u4WapiSelectedGroupCipher = u4GroupSuite;
kalMemCopy(prAdapter->prGlueInfo->aucWapiAssocInfoIEs, prWapiInfo, u2IeLength);
prAdapter->prGlueInfo->u2WapiAssocInfoIESz = u2IeLength;
DBGLOG(SEC, TRACE, "Assoc Info IE sz %ld\n", u2IeLength);
prAdapter->rWifiVar.rConnSettings.fgWapiMode = TRUE;
return WLAN_STATUS_SUCCESS;
}
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to set the wpi key to the driver.
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[in] pvSetBuffer A pointer to the buffer that holds the data to be set.
* \param[in] u4SetBufferLen The length of the set buffer.
* \param[out] pu4SetInfoLen If the call is successful, returns the number of
* bytes read from the set buffer. If the call failed
* due to invalid length of the set buffer, returns
* the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_ADAPTER_NOT_READY
* \retval WLAN_STATUS_INVALID_LENGTH
* \retval WLAN_STATUS_INVALID_DATA
*
* \note The setting buffer P_PARAM_WPI_KEY, which is set by NDIS, is unpacked.
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidSetWapiKey(IN P_ADAPTER_T prAdapter, IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
P_GLUE_INFO_T prGlueInfo;
P_CMD_INFO_T prCmdInfo;
P_WIFI_CMD_T prWifiCmd;
P_PARAM_WPI_KEY_T prNewKey;
P_CMD_802_11_KEY prCmdKey;
PUINT_8 pc;
UINT_8 ucCmdSeqNum;
P_STA_RECORD_T prStaRec;
P_BSS_INFO_T prBssInfo;
DEBUGFUNC("wlanoidSetWapiKey");
DBGLOG(REQ, LOUD, "\r\n");
ASSERT(prAdapter);
ASSERT(pvSetBuffer);
ASSERT(pu4SetInfoLen);
if (prAdapter->rAcpiState == ACPI_STATE_D3) {
DBGLOG(REQ, WARN,
"Fail in set add key! (Adapter not ready). ACPI=D%d, Radio=%d\r\n",
prAdapter->rAcpiState, prAdapter->fgIsRadioOff);
return WLAN_STATUS_ADAPTER_NOT_READY;
}
prNewKey = (P_PARAM_WPI_KEY_T) pvSetBuffer;
DBGLOG_MEM8(REQ, TRACE, (PUINT_8) pvSetBuffer, 560);
pc = (PUINT_8) pvSetBuffer;
*pu4SetInfoLen = u4SetBufferLen;
/* Todo:: WAPI AP mode !!!!! */
prBssInfo = prAdapter->prAisBssInfo;
prNewKey->ucKeyID = prNewKey->ucKeyID & BIT(0);
/* Dump P_PARAM_WPI_KEY_T content. */
DBGLOG(REQ, TRACE, "Set: Dump P_PARAM_WPI_KEY_T content\r\n");
DBGLOG(REQ, TRACE, "TYPE : %d\r\n", prNewKey->eKeyType);
DBGLOG(REQ, TRACE, "Direction : %d\r\n", prNewKey->eDirection);
DBGLOG(REQ, TRACE, "KeyID : %d\r\n", prNewKey->ucKeyID);
DBGLOG(REQ, TRACE, "AddressIndex:\r\n");
DBGLOG_MEM8(REQ, TRACE, prNewKey->aucAddrIndex, 12);
prNewKey->u4LenWPIEK = 16;
DBGLOG_MEM8(REQ, TRACE, (PUINT_8) prNewKey->aucWPIEK, (UINT_8) prNewKey->u4LenWPIEK);
prNewKey->u4LenWPICK = 16;
DBGLOG(REQ, TRACE, "CK Key(%d):\r\n", (UINT_8) prNewKey->u4LenWPICK);
DBGLOG_MEM8(REQ, TRACE, (PUINT_8) prNewKey->aucWPICK, (UINT_8) prNewKey->u4LenWPICK);
DBGLOG(REQ, TRACE, "PN:\r\n");
if (prNewKey->eKeyType == 0) {
prNewKey->aucPN[0] = 0x5c;
prNewKey->aucPN[1] = 0x36;
prNewKey->aucPN[2] = 0x5c;
prNewKey->aucPN[3] = 0x36;
prNewKey->aucPN[4] = 0x5c;
prNewKey->aucPN[5] = 0x36;
prNewKey->aucPN[6] = 0x5c;
prNewKey->aucPN[7] = 0x36;
prNewKey->aucPN[8] = 0x5c;
prNewKey->aucPN[9] = 0x36;
prNewKey->aucPN[10] = 0x5c;
prNewKey->aucPN[11] = 0x36;
prNewKey->aucPN[12] = 0x5c;
prNewKey->aucPN[13] = 0x36;
prNewKey->aucPN[14] = 0x5c;
prNewKey->aucPN[15] = 0x36;
}
DBGLOG_MEM8(REQ, TRACE, (PUINT_8) prNewKey->aucPN, 16);
prGlueInfo = prAdapter->prGlueInfo;
prCmdInfo = cmdBufAllocateCmdInfo(prAdapter, (CMD_HDR_SIZE + u4SetBufferLen));
if (!prCmdInfo) {
DBGLOG(INIT, ERROR, "Allocate CMD_INFO_T ==> FAILED.\n");
return WLAN_STATUS_FAILURE;
}
/* increase command sequence number */
ucCmdSeqNum = nicIncreaseCmdSeqNum(prAdapter);
/* compose CMD_ID_ADD_REMOVE_KEY cmd pkt */
prCmdInfo->eCmdType = COMMAND_TYPE_NETWORK_IOCTL;
prCmdInfo->u2InfoBufLen = CMD_HDR_SIZE + sizeof(CMD_802_11_KEY);
prCmdInfo->pfCmdDoneHandler = nicCmdEventSetCommon;
prCmdInfo->pfCmdTimeoutHandler = nicOidCmdTimeoutCommon;
prCmdInfo->fgIsOid = TRUE;
prCmdInfo->ucCID = CMD_ID_ADD_REMOVE_KEY;
prCmdInfo->fgSetQuery = TRUE;
prCmdInfo->fgNeedResp = FALSE;
prCmdInfo->ucCmdSeqNum = ucCmdSeqNum;
prCmdInfo->u4SetInfoLen = u4SetBufferLen;
prCmdInfo->pvInformationBuffer = pvSetBuffer;
prCmdInfo->u4InformationBufferLength = u4SetBufferLen;
/* Setup WIFI_CMD_T */
prWifiCmd = (P_WIFI_CMD_T) (prCmdInfo->pucInfoBuffer);
prWifiCmd->u2TxByteCount = prCmdInfo->u2InfoBufLen;
prWifiCmd->u2PQ_ID = CMD_PQ_ID;
prWifiCmd->ucPktTypeID = CMD_PACKET_TYPE_ID;
prWifiCmd->ucCID = prCmdInfo->ucCID;
prWifiCmd->ucSetQuery = prCmdInfo->fgSetQuery;
prWifiCmd->ucSeqNum = prCmdInfo->ucCmdSeqNum;
prCmdKey = (P_CMD_802_11_KEY) (prWifiCmd->aucBuffer);
kalMemZero(prCmdKey, sizeof(CMD_802_11_KEY));
prCmdKey->ucAddRemove = 1; /* Add */
if (prNewKey->eKeyType == ENUM_WPI_PAIRWISE_KEY) {
prCmdKey->ucTxKey = 1;
prCmdKey->ucKeyType = 1;
}
kalMemCopy(prCmdKey->aucPeerAddr, (PUINT_8) prNewKey->aucAddrIndex, MAC_ADDR_LEN);
if ((prCmdKey->aucPeerAddr[0] & prCmdKey->aucPeerAddr[1] & prCmdKey->aucPeerAddr[2] &
prCmdKey->aucPeerAddr[3] & prCmdKey->aucPeerAddr[4] & prCmdKey->aucPeerAddr[5]) == 0xFF) {
prStaRec = cnmGetStaRecByAddress(prAdapter, prBssInfo->ucBssIndex, prBssInfo->aucBSSID);
ASSERT(prStaRec); /* AIS RSN Group key, addr is BC addr */
kalMemCopy(prCmdKey->aucPeerAddr, prStaRec->aucMacAddr, MAC_ADDR_LEN);
} else {
prStaRec = cnmGetStaRecByAddress(prAdapter, prBssInfo->ucBssIndex, prCmdKey->aucPeerAddr);
}
prCmdKey->ucBssIdx = prAdapter->prAisBssInfo->ucBssIndex; /* AIS */
prCmdKey->ucKeyId = prNewKey->ucKeyID;
prCmdKey->ucKeyLen = 32;
prCmdKey->ucAlgorithmId = CIPHER_SUITE_WPI;
kalMemCopy(prCmdKey->aucKeyMaterial, (PUINT_8) prNewKey->aucWPIEK, 16);
kalMemCopy(prCmdKey->aucKeyMaterial + 16, (PUINT_8) prNewKey->aucWPICK, 16);
kalMemCopy(prCmdKey->aucKeyRsc, (PUINT_8) prNewKey->aucPN, 16);
if (prCmdKey->ucTxKey) {
if (prStaRec) {
if (prCmdKey->ucKeyType) { /* AIS RSN STA */
prCmdKey->ucWlanIndex = prStaRec->ucWlanIndex;
prStaRec->fgTransmitKeyExist = TRUE; /* wait for CMD Done ? */
} else {
ASSERT(FALSE);
}
}
#if 0
if (fgAddTxBcKey || !prStaRec) {
if ((prCmdKey->aucPeerAddr[0] & prCmdKey->aucPeerAddr[1] & prCmdKey->
aucPeerAddr[2] & prCmdKey->aucPeerAddr[3] & prCmdKey->aucPeerAddr[4] & prCmdKey->
aucPeerAddr[5]) == 0xFF) {
prCmdKey->ucWlanIndex = 255; /* AIS WEP Tx key */
} else { /* Exist this case ? */
ASSERT(FALSE);
/* prCmdKey->ucWlanIndex = */
/* secPrivacySeekForBcEntry(prAdapter, */
/* prBssInfo->ucBssIndex, */
/* NETWORK_TYPE_AIS, */
/* prCmdKey->aucPeerAddr, */
/* prCmdKey->ucAlgorithmId, */
/* prCmdKey->ucKeyId, */
}
prBssInfo->fgBcDefaultKeyExist = TRUE;
prBssInfo->ucBMCWlanIndex = prCmdKey->ucWlanIndex; /* Saved for AIS WEP */
prBssInfo->ucTxBcDefaultIdx = prCmdKey->ucKeyId;
}
#endif
} else {
/* Including IBSS RSN Rx BC key ? */
if ((prCmdKey->aucPeerAddr[0] & prCmdKey->aucPeerAddr[1] &
prCmdKey->aucPeerAddr[2] & prCmdKey->aucPeerAddr[3] &
prCmdKey->aucPeerAddr[4] & prCmdKey->aucPeerAddr[5]) == 0xFF) {
prCmdKey->ucWlanIndex = WTBL_RESERVED_ENTRY; /* AIS WEP, should not have this case!! */
} else {
if (prStaRec) { /* AIS RSN Group key but addr is BSSID */
/* ASSERT(prStaRec->ucBMCWlanIndex < WTBL_SIZE) */
prCmdKey->ucWlanIndex =
secPrivacySeekForBcEntry(prAdapter, prStaRec->ucBssIndex,
prStaRec->aucMacAddr,
prStaRec->ucIndex,
prCmdKey->ucAlgorithmId, prCmdKey->ucKeyId);
prStaRec->ucWlanIndex = prCmdKey->ucWlanIndex;
} else { /* Exist this case ? */
ASSERT(FALSE);
/* prCmdKey->ucWlanIndex = */
/* secPrivacySeekForBcEntry(prAdapter, */
/* prBssInfo->ucBssIndex, */
/* NETWORK_TYPE_AIS, */
/* prCmdKey->aucPeerAddr, */
/* prCmdKey->ucAlgorithmId, */
/* prCmdKey->ucKeyId, */
}
}
}
/* insert into prCmdQueue */
kalEnqueueCommand(prGlueInfo, (P_QUE_ENTRY_T) prCmdInfo);
/* wakeup txServiceThread later */
GLUE_SET_EVENT(prGlueInfo);
return WLAN_STATUS_PENDING;
} /* wlanoidSetAddKey */
#endif
#if CFG_SUPPORT_WPS2
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called by WSC to set the assoc info, which is needed to add to
* Association request frame while join WPS AP.
*
* \param[in] prAdapter Pointer to the Adapter structure
* \param[in] pvSetBuffer A pointer to the buffer that holds the data to be set
* \param[in] u4SetBufferLen The length of the set buffer
* \param[out] pu4SetInfoLen If the call is successful, returns the number of
* bytes read from the set buffer. If the call failed due to invalid length of
* the set buffer, returns the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_INVALID_DATA If new setting value is wrong.
* \retval WLAN_STATUS_INVALID_LENGTH
*
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidSetWSCAssocInfo(IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
ASSERT(prAdapter);
ASSERT(pvSetBuffer);
ASSERT(pu4SetInfoLen);
DEBUGFUNC("wlanoidSetWSCAssocInfo");
DBGLOG(REQ, LOUD, "\r\n");
if (u4SetBufferLen == 0)
return WLAN_STATUS_INVALID_LENGTH;
*pu4SetInfoLen = u4SetBufferLen;
kalMemCopy(prAdapter->prGlueInfo->aucWSCAssocInfoIE, pvSetBuffer, u4SetBufferLen);
prAdapter->prGlueInfo->u2WSCAssocInfoIELen = (UINT_16) u4SetBufferLen;
DBGLOG(SEC, TRACE, "Assoc Info IE sz %ld\n", u4SetBufferLen);
return WLAN_STATUS_SUCCESS;
}
#endif
#if CFG_ENABLE_WAKEUP_ON_LAN
WLAN_STATUS
wlanoidSetAddWakeupPattern(IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
P_PARAM_PM_PACKET_PATTERN prPacketPattern;
DEBUGFUNC("wlanoidSetAddWakeupPattern");
DBGLOG(REQ, LOUD, "\r\n");
ASSERT(prAdapter);
ASSERT(pu4SetInfoLen);
*pu4SetInfoLen = sizeof(PARAM_PM_PACKET_PATTERN);
if (u4SetBufferLen < sizeof(PARAM_PM_PACKET_PATTERN))
return WLAN_STATUS_INVALID_LENGTH;
ASSERT(pvSetBuffer);
prPacketPattern = (P_PARAM_PM_PACKET_PATTERN) pvSetBuffer;
/* FIXME: Send the struct to firmware */
return WLAN_STATUS_FAILURE;
}
WLAN_STATUS
wlanoidSetRemoveWakeupPattern(IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
P_PARAM_PM_PACKET_PATTERN prPacketPattern;
DEBUGFUNC("wlanoidSetAddWakeupPattern");
DBGLOG(REQ, LOUD, "\r\n");
ASSERT(prAdapter);
ASSERT(pu4SetInfoLen);
*pu4SetInfoLen = sizeof(PARAM_PM_PACKET_PATTERN);
if (u4SetBufferLen < sizeof(PARAM_PM_PACKET_PATTERN))
return WLAN_STATUS_INVALID_LENGTH;
ASSERT(pvSetBuffer);
prPacketPattern = (P_PARAM_PM_PACKET_PATTERN) pvSetBuffer;
/* FIXME: Send the struct to firmware */
return WLAN_STATUS_FAILURE;
}
WLAN_STATUS
wlanoidQueryEnableWakeup(IN P_ADAPTER_T prAdapter,
OUT PVOID pvQueryBuffer, IN UINT_32 u4QueryBufferLen, OUT PUINT_32 pu4QueryInfoLen)
{
PUINT_32 pu4WakeupEventEnable;
DEBUGFUNC("wlanoidQueryEnableWakeup");
DBGLOG(REQ, LOUD, "\r\n");
ASSERT(prAdapter);
ASSERT(pu4QueryInfoLen);
if (u4QueryBufferLen)
ASSERT(pvQueryBuffer);
*pu4QueryInfoLen = sizeof(UINT_32);
if (u4QueryBufferLen < sizeof(UINT_32))
return WLAN_STATUS_BUFFER_TOO_SHORT;
pu4WakeupEventEnable = (PUINT_32) pvQueryBuffer;
*pu4WakeupEventEnable = prAdapter->u4WakeupEventEnable;
return WLAN_STATUS_SUCCESS;
}
WLAN_STATUS
wlanoidSetEnableWakeup(IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
PUINT_32 pu4WakeupEventEnable;
DEBUGFUNC("wlanoidSetEnableWakup");
DBGLOG(REQ, LOUD, "\r\n");
ASSERT(prAdapter);
ASSERT(pu4SetInfoLen);
*pu4SetInfoLen = sizeof(UINT_32);
if (u4SetBufferLen < sizeof(UINT_32))
return WLAN_STATUS_INVALID_LENGTH;
ASSERT(pvSetBuffer);
pu4WakeupEventEnable = (PUINT_32) pvSetBuffer;
prAdapter->u4WakeupEventEnable = *pu4WakeupEventEnable;
/* FIXME: Send Command Event for setting wakeup-pattern / Magic Packet to firmware */
return WLAN_STATUS_FAILURE;
}
#endif
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to configure PS related settings for WMM-PS test.
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[in] pvSetBuffer A pointer to the buffer that holds the data to be set.
* \param[in] u4SetBufferLen The length of the set buffer.
* \param[out] pu4SetInfoLen If the call is successful, returns the number of
* bytes read from the set buffer. If the call failed
* due to invalid length of the set buffer, returns
* the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidSetWiFiWmmPsTest(IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
P_PARAM_CUSTOM_WMM_PS_TEST_STRUCT_T prWmmPsTestInfo;
WLAN_STATUS rStatus = WLAN_STATUS_SUCCESS;
CMD_SET_WMM_PS_TEST_STRUCT_T rSetWmmPsTestParam;
UINT_16 u2CmdBufLen;
P_PM_PROFILE_SETUP_INFO_T prPmProfSetupInfo;
P_BSS_INFO_T prBssInfo;
DEBUGFUNC("wlanoidSetWiFiWmmPsTest");
ASSERT(prAdapter);
ASSERT(pvSetBuffer);
ASSERT(pu4SetInfoLen);
*pu4SetInfoLen = sizeof(PARAM_CUSTOM_WMM_PS_TEST_STRUCT_T);
prWmmPsTestInfo = (P_PARAM_CUSTOM_WMM_PS_TEST_STRUCT_T) pvSetBuffer;
rSetWmmPsTestParam.ucBssIndex = prAdapter->prAisBssInfo->ucBssIndex;
rSetWmmPsTestParam.bmfgApsdEnAc = prWmmPsTestInfo->bmfgApsdEnAc;
rSetWmmPsTestParam.ucIsEnterPsAtOnce = prWmmPsTestInfo->ucIsEnterPsAtOnce;
rSetWmmPsTestParam.ucIsDisableUcTrigger = prWmmPsTestInfo->ucIsDisableUcTrigger;
prBssInfo = GET_BSS_INFO_BY_INDEX(prAdapter, rSetWmmPsTestParam.ucBssIndex);
prPmProfSetupInfo = &prBssInfo->rPmProfSetupInfo;
prPmProfSetupInfo->ucBmpDeliveryAC = (rSetWmmPsTestParam.bmfgApsdEnAc >> 4) & BITS(0, 3);
prPmProfSetupInfo->ucBmpTriggerAC = rSetWmmPsTestParam.bmfgApsdEnAc & BITS(0, 3);
u2CmdBufLen = sizeof(CMD_SET_WMM_PS_TEST_STRUCT_T);
#if 0
/* it will apply the disable trig or not immediately */
if (prPmInfo->ucWmmPsDisableUcPoll && prPmInfo->ucWmmPsConnWithTrig)
NIC_PM_WMM_PS_DISABLE_UC_TRIG(prAdapter, TRUE);
else
NIC_PM_WMM_PS_DISABLE_UC_TRIG(prAdapter, FALSE);
#endif
rStatus = wlanSendSetQueryCmd(prAdapter, CMD_ID_SET_WMM_PS_TEST_PARMS,
TRUE, FALSE, TRUE,
nicCmdEventSetCommon,/* TODO? */
nicCmdTimeoutCommon, u2CmdBufLen,
(PUINT_8) &rSetWmmPsTestParam, NULL, 0);
return rStatus;
} /* wlanoidSetWiFiWmmPsTest */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to configure enable/disable TX A-MPDU feature.
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[in] pvSetBuffer A pointer to the buffer that holds the data to be set.
* \param[in] u4SetBufferLen The length of the set buffer.
* \param[out] pu4SetInfoLen If the call is successful, returns the number of
* bytes read from the set buffer. If the call failed
* due to invalid length of the set buffer, returns
* the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidSetTxAmpdu(IN P_ADAPTER_T prAdapter, IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
WLAN_STATUS rStatus = WLAN_STATUS_SUCCESS;
CMD_TX_AMPDU_T rTxAmpdu;
UINT_16 u2CmdBufLen;
PBOOLEAN pfgEnable;
DEBUGFUNC("wlanoidSetTxAmpdu");
ASSERT(prAdapter);
ASSERT(pvSetBuffer);
ASSERT(pu4SetInfoLen);
*pu4SetInfoLen = sizeof(BOOLEAN);
pfgEnable = (PBOOLEAN) pvSetBuffer;
rTxAmpdu.fgEnable = *pfgEnable;
u2CmdBufLen = sizeof(CMD_TX_AMPDU_T);
rStatus = wlanSendSetQueryCmd(prAdapter,
CMD_ID_TX_AMPDU,
TRUE, FALSE, TRUE, NULL, NULL, u2CmdBufLen, (PUINT_8) &rTxAmpdu, NULL, 0);
return rStatus;
} /* wlanoidSetTxAmpdu */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to configure reject/accept ADDBA Request.
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[in] pvSetBuffer A pointer to the buffer that holds the data to be set.
* \param[in] u4SetBufferLen The length of the set buffer.
* \param[out] pu4SetInfoLen If the call is successful, returns the number of
* bytes read from the set buffer. If the call failed
* due to invalid length of the set buffer, returns
* the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidSetAddbaReject(IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
WLAN_STATUS rStatus = WLAN_STATUS_SUCCESS;
CMD_ADDBA_REJECT_T rAddbaReject;
UINT_16 u2CmdBufLen;
PBOOLEAN pfgEnable;
DEBUGFUNC("wlanoidSetAddbaReject");
ASSERT(prAdapter);
ASSERT(pvSetBuffer);
ASSERT(pu4SetInfoLen);
*pu4SetInfoLen = sizeof(BOOLEAN);
pfgEnable = (PBOOLEAN) pvSetBuffer;
rAddbaReject.fgEnable = *pfgEnable;
u2CmdBufLen = sizeof(CMD_ADDBA_REJECT_T);
rStatus = wlanSendSetQueryCmd(prAdapter,
CMD_ID_ADDBA_REJECT,
TRUE, FALSE, TRUE, NULL, NULL, u2CmdBufLen, (PUINT_8) &rAddbaReject, NULL, 0);
return rStatus;
} /* wlanoidSetAddbaReject */
#if CFG_SLT_SUPPORT
WLAN_STATUS
wlanoidQuerySLTStatus(IN P_ADAPTER_T prAdapter,
OUT PVOID pvQueryBuffer, IN UINT_32 u4QueryBufferLen, OUT PUINT_32 pu4QueryInfoLen)
{
WLAN_STATUS rWlanStatus = WLAN_STATUS_SUCCESS;
P_PARAM_MTK_SLT_TEST_STRUCT_T prMtkSltInfo = (P_PARAM_MTK_SLT_TEST_STRUCT_T) NULL;
P_SLT_INFO_T prSltInfo = (P_SLT_INFO_T) NULL;
DEBUGFUNC("wlanoidQuerySLTStatus");
DBGLOG(REQ, LOUD, "\r\n");
ASSERT(prAdapter);
ASSERT(pu4QueryInfoLen);
*pu4QueryInfoLen = sizeof(PARAM_MTK_SLT_TEST_STRUCT_T);
if (u4QueryBufferLen < sizeof(PARAM_MTK_SLT_TEST_STRUCT_T))
return WLAN_STATUS_INVALID_LENGTH;
ASSERT(pvQueryBuffer);
prMtkSltInfo = (P_PARAM_MTK_SLT_TEST_STRUCT_T) pvQueryBuffer;
prSltInfo = &(prAdapter->rWifiVar.rSltInfo);
switch (prMtkSltInfo->rSltFuncIdx) {
case ENUM_MTK_SLT_FUNC_LP_SET:
{
P_PARAM_MTK_SLT_LP_TEST_STRUCT_T prLpSetting = (P_PARAM_MTK_SLT_LP_TEST_STRUCT_T) NULL;
ASSERT(prMtkSltInfo->u4FuncInfoLen == sizeof(PARAM_MTK_SLT_LP_TEST_STRUCT_T));
prLpSetting = (P_PARAM_MTK_SLT_LP_TEST_STRUCT_T) &prMtkSltInfo->unFuncInfoContent;
prLpSetting->u4BcnRcvNum = prSltInfo->u4BeaconReceiveCnt;
}
break;
default:
/* TBD... */
break;
}
return rWlanStatus;
} /* wlanoidQuerySLTStatus */
WLAN_STATUS
wlanoidUpdateSLTMode(IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
WLAN_STATUS rWlanStatus = WLAN_STATUS_SUCCESS;
P_PARAM_MTK_SLT_TEST_STRUCT_T prMtkSltInfo = (P_PARAM_MTK_SLT_TEST_STRUCT_T) NULL;
P_SLT_INFO_T prSltInfo = (P_SLT_INFO_T) NULL;
P_BSS_DESC_T prBssDesc = (P_BSS_DESC_T) NULL;
P_STA_RECORD_T prStaRec = (P_STA_RECORD_T) NULL;
P_BSS_INFO_T prBssInfo = (P_BSS_INFO_T) NULL;
/* 1. Action: Update or Initial Set
* 2. Role.
* 3. Target MAC address.
* 4. RF BW & Rate Settings
*/
DEBUGFUNC("wlanoidUpdateSLTMode");
DBGLOG(REQ, LOUD, "\r\n");
ASSERT(prAdapter);
ASSERT(pu4SetInfoLen);
*pu4SetInfoLen = sizeof(PARAM_MTK_SLT_TEST_STRUCT_T);
if (u4SetBufferLen < sizeof(PARAM_MTK_SLT_TEST_STRUCT_T))
return WLAN_STATUS_INVALID_LENGTH;
ASSERT(pvSetBuffer);
prMtkSltInfo = (P_PARAM_MTK_SLT_TEST_STRUCT_T) pvSetBuffer;
prSltInfo = &(prAdapter->rWifiVar.rSltInfo);
prBssInfo = prAdapter->prAisBssInfo;
switch (prMtkSltInfo->rSltFuncIdx) {
case ENUM_MTK_SLT_FUNC_INITIAL: /* Initialize */
{
P_PARAM_MTK_SLT_INITIAL_STRUCT_T prMtkSltInit = (P_PARAM_MTK_SLT_INITIAL_STRUCT_T) NULL;
ASSERT(prMtkSltInfo->u4FuncInfoLen == sizeof(PARAM_MTK_SLT_INITIAL_STRUCT_T));
prMtkSltInit = (P_PARAM_MTK_SLT_INITIAL_STRUCT_T) &prMtkSltInfo->unFuncInfoContent;
if (prSltInfo->prPseudoStaRec != NULL) {
/* The driver has been initialized. */
prSltInfo->prPseudoStaRec = NULL;
}
prSltInfo->prPseudoBssDesc = scanSearchExistingBssDesc(prAdapter,
BSS_TYPE_IBSS,
prMtkSltInit->aucTargetMacAddr,
prMtkSltInit->aucTargetMacAddr);
prSltInfo->u2SiteID = prMtkSltInit->u2SiteID;
/* Bandwidth 2.4G: Channel 1~14
* Bandwidth 5G: *36, 40, 44, 48, 52, 56, 60, 64,
* *100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140,
* 149, 153, *157, 161,
* 184, 188, 192, 196, 200, 204, 208, 212, *216
*/
prSltInfo->ucChannel2G4 = 1 + (prSltInfo->u2SiteID % 4) * 5;
switch (prSltInfo->ucChannel2G4) {
case 1:
prSltInfo->ucChannel5G = 36;
break;
case 6:
prSltInfo->ucChannel5G = 52;
break;
case 11:
prSltInfo->ucChannel5G = 104;
break;
case 16:
prSltInfo->ucChannel2G4 = 14;
prSltInfo->ucChannel5G = 161;
break;
default:
ASSERT(FALSE);
}
if (prSltInfo->prPseudoBssDesc == NULL) {
do {
prSltInfo->prPseudoBssDesc = scanAllocateBssDesc(prAdapter);
if (prSltInfo->prPseudoBssDesc == NULL) {
rWlanStatus = WLAN_STATUS_FAILURE;
break;
}
prBssDesc = prSltInfo->prPseudoBssDesc;
} while (FALSE);
} else {
prBssDesc = prSltInfo->prPseudoBssDesc;
}
if (prBssDesc) {
prBssDesc->eBSSType = BSS_TYPE_IBSS;
COPY_MAC_ADDR(prBssDesc->aucSrcAddr, prMtkSltInit->aucTargetMacAddr);
COPY_MAC_ADDR(prBssDesc->aucBSSID, prBssInfo->aucOwnMacAddr);
prBssDesc->u2BeaconInterval = 100;
prBssDesc->u2ATIMWindow = 0;
prBssDesc->ucDTIMPeriod = 1;
prBssDesc->u2IELength = 0;
prBssDesc->fgIsERPPresent = TRUE;
prBssDesc->fgIsHTPresent = TRUE;
prBssDesc->u2OperationalRateSet = BIT(RATE_36M_INDEX);
prBssDesc->u2BSSBasicRateSet = BIT(RATE_36M_INDEX);
prBssDesc->fgIsUnknownBssBasicRate = FALSE;
prBssDesc->fgIsLargerTSF = TRUE;
prBssDesc->eBand = BAND_2G4;
prBssDesc->ucChannelNum = prSltInfo->ucChannel2G4;
prBssDesc->ucPhyTypeSet = PHY_TYPE_SET_802_11ABGN;
GET_CURRENT_SYSTIME(&prBssDesc->rUpdateTime);
}
}
break;
case ENUM_MTK_SLT_FUNC_RATE_SET: /* Update RF Settings. */
if (prSltInfo->prPseudoStaRec == NULL) {
rWlanStatus = WLAN_STATUS_FAILURE;
} else {
P_PARAM_MTK_SLT_TR_TEST_STRUCT_T prTRSetting = (P_PARAM_MTK_SLT_TR_TEST_STRUCT_T) NULL;
ASSERT(prMtkSltInfo->u4FuncInfoLen == sizeof(PARAM_MTK_SLT_TR_TEST_STRUCT_T));
prStaRec = prSltInfo->prPseudoStaRec;
prTRSetting = (P_PARAM_MTK_SLT_TR_TEST_STRUCT_T) &prMtkSltInfo->unFuncInfoContent;
if (prTRSetting->rNetworkType == PARAM_NETWORK_TYPE_OFDM5) {
prBssInfo->eBand = BAND_5G;
prBssInfo->ucPrimaryChannel = prSltInfo->ucChannel5G;
}
if (prTRSetting->rNetworkType == PARAM_NETWORK_TYPE_OFDM24) {
prBssInfo->eBand = BAND_2G4;
prBssInfo->ucPrimaryChannel = prSltInfo->ucChannel2G4;
}
if ((prTRSetting->u4FixedRate & FIXED_BW_DL40) != 0) {
/* RF 40 */
/* It would controls RFBW capability in WTBL. */
prStaRec->u2HtCapInfo |= HT_CAP_INFO_SUP_CHNL_WIDTH;
/* This controls RF BW, RF BW would be 40 only if
* 1. PHY_TYPE_BIT_HT is TRUE.
* 2. SCO is SCA/SCB.
*/
prStaRec->ucDesiredPhyTypeSet = PHY_TYPE_BIT_HT;
/* U20/L20 Control. */
switch (prTRSetting->u4FixedRate & 0xC000) {
case FIXED_EXT_CHNL_U20:
prBssInfo->eBssSCO = CHNL_EXT_SCB; /* +2 */
if (prTRSetting->rNetworkType == PARAM_NETWORK_TYPE_OFDM5) {
prBssInfo->ucPrimaryChannel += 2;
} else {
/* For channel 1, testing L20 at channel 8. AOSP */
SetTestChannel(&prBssInfo->ucPrimaryChannel);
}
break;
case FIXED_EXT_CHNL_L20:
default: /* 40M */
prBssInfo->eBssSCO = CHNL_EXT_SCA; /* -2 */
if (prTRSetting->rNetworkType == PARAM_NETWORK_TYPE_OFDM5) {
prBssInfo->ucPrimaryChannel -= 2;
} else {
/* For channel 11 / 14. testing U20 at channel 3. AOSP */
SetTestChannel(&prBssInfo->ucPrimaryChannel);
}
break;
}
} else {
/* RF 20 */
prStaRec->u2HtCapInfo &= ~HT_CAP_INFO_SUP_CHNL_WIDTH;
prBssInfo->eBssSCO = CHNL_EXT_SCN;
}
prBssInfo->fgErpProtectMode = FALSE;
prBssInfo->eHtProtectMode = HT_PROTECT_MODE_NONE;
prBssInfo->eGfOperationMode = GF_MODE_NORMAL;
nicUpdateBss(prAdapter, prBssInfo->ucNetTypeIndex);
prStaRec->u2HtCapInfo &= ~(HT_CAP_INFO_SHORT_GI_20M | HT_CAP_INFO_SHORT_GI_40M);
switch (prTRSetting->u4FixedRate & 0xFF) {
case RATE_OFDM_54M:
prStaRec->u2DesiredNonHTRateSet = BIT(RATE_54M_SW_INDEX);
break;
case RATE_OFDM_48M:
prStaRec->u2DesiredNonHTRateSet = BIT(RATE_48M_SW_INDEX);
break;
case RATE_OFDM_36M:
prStaRec->u2DesiredNonHTRateSet = BIT(RATE_36M_SW_INDEX);
break;
case RATE_OFDM_24M:
prStaRec->u2DesiredNonHTRateSet = BIT(RATE_24M_SW_INDEX);
break;
case RATE_OFDM_6M:
prStaRec->u2DesiredNonHTRateSet = BIT(RATE_6M_SW_INDEX);
break;
case RATE_CCK_11M_LONG:
prStaRec->u2DesiredNonHTRateSet = BIT(RATE_11M_SW_INDEX);
break;
case RATE_CCK_1M_LONG:
prStaRec->u2DesiredNonHTRateSet = BIT(RATE_1M_SW_INDEX);
break;
case RATE_GF_MCS_0:
prStaRec->u2DesiredNonHTRateSet = BIT(RATE_HT_PHY_SW_INDEX);
prStaRec->u2HtCapInfo |= HT_CAP_INFO_HT_GF;
break;
case RATE_MM_MCS_7:
prStaRec->u2DesiredNonHTRateSet = BIT(RATE_HT_PHY_SW_INDEX);
prStaRec->u2HtCapInfo &= ~HT_CAP_INFO_HT_GF;
#if 0 /* Only for Current Measurement Mode. */
prStaRec->u2HtCapInfo |= (HT_CAP_INFO_SHORT_GI_20M | HT_CAP_INFO_SHORT_GI_40M);
#endif
break;
case RATE_GF_MCS_7:
prStaRec->u2DesiredNonHTRateSet = BIT(RATE_HT_PHY_SW_INDEX);
prStaRec->u2HtCapInfo |= HT_CAP_INFO_HT_GF;
break;
default:
prStaRec->u2DesiredNonHTRateSet = BIT(RATE_36M_SW_INDEX);
break;
}
cnmStaRecChangeState(prAdapter, prStaRec, STA_STATE_1);
cnmStaRecChangeState(prAdapter, prStaRec, STA_STATE_3);
}
break;
case ENUM_MTK_SLT_FUNC_LP_SET: /* Reset LP Test Result. */
{
P_PARAM_MTK_SLT_LP_TEST_STRUCT_T prLpSetting = (P_PARAM_MTK_SLT_LP_TEST_STRUCT_T) NULL;
ASSERT(prMtkSltInfo->u4FuncInfoLen == sizeof(PARAM_MTK_SLT_LP_TEST_STRUCT_T));
prLpSetting = (P_PARAM_MTK_SLT_LP_TEST_STRUCT_T) &prMtkSltInfo->unFuncInfoContent;
if (prSltInfo->prPseudoBssDesc == NULL) {
/* Please initial SLT Mode first. */
break;
}
prBssDesc = prSltInfo->prPseudoBssDesc;
switch (prLpSetting->rLpTestMode) {
case ENUM_MTK_LP_TEST_NORMAL:
/* In normal mode, we would use target MAC address to be the BSSID. */
COPY_MAC_ADDR(prBssDesc->aucBSSID, prBssInfo->aucOwnMacAddr);
prSltInfo->fgIsDUT = FALSE;
break;
case ENUM_MTK_LP_TEST_GOLDEN_SAMPLE:
/* 1. Lower AIFS of BCN queue.
* 2. Fixed Random Number tobe 0.
*/
prSltInfo->fgIsDUT = FALSE;
/* In LP test mode, we would use MAC address of Golden Sample to be the BSSID. */
COPY_MAC_ADDR(prBssDesc->aucBSSID, prBssInfo->aucOwnMacAddr);
break;
case ENUM_MTK_LP_TEST_DUT:
/* 1. Enter Sleep Mode.
* 2. Fix random number a large value & enlarge AIFN of BCN queue.
*/
COPY_MAC_ADDR(prBssDesc->aucBSSID, prBssDesc->aucSrcAddr);
prSltInfo->u4BeaconReceiveCnt = 0;
prSltInfo->fgIsDUT = TRUE;
break;
}
}
break;
default:
break;
}
return WLAN_STATUS_FAILURE;
return rWlanStatus;
} /* wlanoidUpdateSLTMode */
#endif
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to query NVRAM value.
*
* \param[in] pvAdapter Pointer to the Adapter structure.
* \param[out] pvQueryBuf A pointer to the buffer that holds the result of
* the query.
* \param[in] u4QueryBufLen The length of the query buffer.
* \param[out] pu4QueryInfoLen If the call is successful, returns the number of
* bytes written into the query buffer. If the call
* failed due to invalid length of the query buffer,
* returns the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_FAILURE
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidQueryNvramRead(IN P_ADAPTER_T prAdapter,
OUT PVOID pvQueryBuffer, IN UINT_32 u4QueryBufferLen, OUT PUINT_32 pu4QueryInfoLen)
{
P_PARAM_CUSTOM_NVRAM_RW_STRUCT_T prNvramRwInfo;
UINT_16 u2Data;
BOOLEAN fgStatus;
WLAN_STATUS rStatus = WLAN_STATUS_SUCCESS;
DEBUGFUNC("wlanoidQueryNvramRead");
ASSERT(prAdapter);
ASSERT(pu4QueryInfoLen);
if (u4QueryBufferLen)
ASSERT(pvQueryBuffer);
*pu4QueryInfoLen = sizeof(PARAM_CUSTOM_NVRAM_RW_STRUCT_T);
if (u4QueryBufferLen < sizeof(PARAM_CUSTOM_NVRAM_RW_STRUCT_T))
return WLAN_STATUS_INVALID_LENGTH;
prNvramRwInfo = (P_PARAM_CUSTOM_NVRAM_RW_STRUCT_T) pvQueryBuffer;
if (prNvramRwInfo->ucEepromMethod == PARAM_EEPROM_READ_METHOD_READ) {
fgStatus = kalCfgDataRead16(prAdapter->prGlueInfo,
prNvramRwInfo->ucEepromIndex << 1, /* change to byte offset */
&u2Data);
if (fgStatus) {
prNvramRwInfo->u2EepromData = u2Data;
DBGLOG(REQ, INFO, "NVRAM Read: index=%#X, data=%#02X\r\n",
prNvramRwInfo->ucEepromIndex, u2Data);
} else {
DBGLOG(REQ, ERROR, "NVRAM Read Failed: index=%#x.\r\n", prNvramRwInfo->ucEepromIndex);
rStatus = WLAN_STATUS_FAILURE;
}
} else if (prNvramRwInfo->ucEepromMethod == PARAM_EEPROM_READ_METHOD_GETSIZE) {
prNvramRwInfo->u2EepromData = CFG_FILE_WIFI_REC_SIZE;
DBGLOG(REQ, INFO, "EEPROM size =%d\r\n", prNvramRwInfo->u2EepromData);
}
*pu4QueryInfoLen = sizeof(PARAM_CUSTOM_EEPROM_RW_STRUCT_T);
return rStatus;
} /* wlanoidQueryNvramRead */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to write NVRAM value.
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[in] pvSetBuffer A pointer to the buffer that holds the data to be set.
* \param[in] u4SetBufferLen The length of the set buffer.
* \param[out] pu4SetInfoLen If the call is successful, returns the number of
* bytes read from the set buffer. If the call failed
* due to invalid length of the set buffer, returns
* the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_FAILURE
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidSetNvramWrite(IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
P_PARAM_CUSTOM_NVRAM_RW_STRUCT_T prNvramRwInfo;
BOOLEAN fgStatus;
WLAN_STATUS rStatus = WLAN_STATUS_SUCCESS;
DEBUGFUNC("wlanoidSetNvramWrite");
DBGLOG(INIT, LOUD, "\n");
ASSERT(prAdapter);
ASSERT(pu4SetInfoLen);
*pu4SetInfoLen = sizeof(PARAM_CUSTOM_NVRAM_RW_STRUCT_T);
if (u4SetBufferLen < sizeof(PARAM_CUSTOM_NVRAM_RW_STRUCT_T))
return WLAN_STATUS_INVALID_LENGTH;
ASSERT(pvSetBuffer);
prNvramRwInfo = (P_PARAM_CUSTOM_NVRAM_RW_STRUCT_T) pvSetBuffer;
fgStatus = kalCfgDataWrite16(prAdapter->prGlueInfo,
prNvramRwInfo->ucEepromIndex << 1, /* change to byte offset */
prNvramRwInfo->u2EepromData);
if (fgStatus == FALSE) {
DBGLOG(REQ, ERROR, "NVRAM Write Failed.\r\n");
rStatus = WLAN_STATUS_FAILURE;
}
return rStatus;
} /* wlanoidSetNvramWrite */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to get the config data source type.
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[in] pvSetBuffer A pointer to the buffer that holds the data to be set.
* \param[in] u4SetBufferLen The length of the set buffer.
* \param[out] pu4SetInfoLen If the call is successful, returns the number of
* bytes read from the set buffer. If the call failed
* due to invalid length of the set buffer, returns
* the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_FAILURE
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidQueryCfgSrcType(IN P_ADAPTER_T prAdapter,
OUT PVOID pvQueryBuffer, IN UINT_32 u4QueryBufferLen, OUT PUINT_32 pu4QueryInfoLen)
{
ASSERT(prAdapter);
*pu4QueryInfoLen = sizeof(ENUM_CFG_SRC_TYPE_T);
if (kalIsConfigurationExist(prAdapter->prGlueInfo) == TRUE)
*(P_ENUM_CFG_SRC_TYPE_T) pvQueryBuffer = CFG_SRC_TYPE_NVRAM;
else
*(P_ENUM_CFG_SRC_TYPE_T) pvQueryBuffer = CFG_SRC_TYPE_EEPROM;
return WLAN_STATUS_SUCCESS;
}
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to get the config data source type.
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[in] pvSetBuffer A pointer to the buffer that holds the data to be set.
* \param[in] u4SetBufferLen The length of the set buffer.
* \param[out] pu4SetInfoLen If the call is successful, returns the number of
* bytes read from the set buffer. If the call failed
* due to invalid length of the set buffer, returns
* the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_FAILURE
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidQueryEepromType(IN P_ADAPTER_T prAdapter,
OUT PVOID pvQueryBuffer, IN UINT_32 u4QueryBufferLen, OUT PUINT_32 pu4QueryInfoLen)
{
ASSERT(prAdapter);
*pu4QueryInfoLen = sizeof(P_ENUM_EEPROM_TYPE_T);
#if CFG_SUPPORT_NIC_CAPABILITY
if (prAdapter->fgIsEepromUsed == TRUE)
*(P_ENUM_EEPROM_TYPE_T) pvQueryBuffer = EEPROM_TYPE_PRESENT;
else
*(P_ENUM_EEPROM_TYPE_T) pvQueryBuffer = EEPROM_TYPE_NO;
#else
*(P_ENUM_EEPROM_TYPE_T) pvQueryBuffer = EEPROM_TYPE_NO;
#endif
return WLAN_STATUS_SUCCESS;
}
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to get the config data source type.
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[in] pvSetBuffer A pointer to the buffer that holds the data to be set.
* \param[in] u4SetBufferLen The length of the set buffer.
* \param[out] pu4SetInfoLen If the call is successful, returns the number of
* bytes read from the set buffer. If the call failed
* due to invalid length of the set buffer, returns
* the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_FAILURE
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidSetCountryCode(IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
PUINT_8 pucCountry;
ASSERT(prAdapter);
ASSERT(pvSetBuffer);
if (regd_is_single_sku_en()) {
rlmDomainOidSetCountry(prAdapter, pvSetBuffer, u4SetBufferLen);
*pu4SetInfoLen = u4SetBufferLen;
return WLAN_STATUS_SUCCESS;
}
ASSERT(u4SetBufferLen == 2);
*pu4SetInfoLen = 2;
pucCountry = pvSetBuffer;
prAdapter->rWifiVar.rConnSettings.u2CountryCode = (((UINT_16) pucCountry[0]) << 8) | ((UINT_16) pucCountry[1]);
/* Force to re-search country code in country domains */
prAdapter->prDomainInfo = NULL;
rlmDomainSendCmd(prAdapter, TRUE);
/* Update supported channel list in channel table based on current country domain */
wlanUpdateChannelTable(prAdapter->prGlueInfo);
return WLAN_STATUS_SUCCESS;
}
#if 0
WLAN_STATUS
wlanoidSetNoaParam(IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
P_PARAM_CUSTOM_NOA_PARAM_STRUCT_T prNoaParam;
CMD_CUSTOM_NOA_PARAM_STRUCT_T rCmdNoaParam;
DEBUGFUNC("wlanoidSetNoaParam");
DBGLOG(INIT, LOUD, "\n");
ASSERT(prAdapter);
ASSERT(pu4SetInfoLen);
*pu4SetInfoLen = sizeof(PARAM_CUSTOM_NOA_PARAM_STRUCT_T);
if (u4SetBufferLen < sizeof(PARAM_CUSTOM_NOA_PARAM_STRUCT_T))
return WLAN_STATUS_INVALID_LENGTH;
ASSERT(pvSetBuffer);
prNoaParam = (P_PARAM_CUSTOM_NOA_PARAM_STRUCT_T) pvSetBuffer;
kalMemZero(&rCmdNoaParam, sizeof(CMD_CUSTOM_NOA_PARAM_STRUCT_T));
rCmdNoaParam.u4NoaDurationMs = prNoaParam->u4NoaDurationMs;
rCmdNoaParam.u4NoaIntervalMs = prNoaParam->u4NoaIntervalMs;
rCmdNoaParam.u4NoaCount = prNoaParam->u4NoaCount;
return wlanSendSetQueryCmd(prAdapter,
CMD_ID_SET_NOA_PARAM,
TRUE,
FALSE,
TRUE,
nicCmdEventSetCommon,
nicOidCmdTimeoutCommon,
sizeof(CMD_CUSTOM_NOA_PARAM_STRUCT_T),
(PUINT_8) &rCmdNoaParam, pvSetBuffer, u4SetBufferLen);
}
WLAN_STATUS
wlanoidSetOppPsParam(IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
P_PARAM_CUSTOM_OPPPS_PARAM_STRUCT_T prOppPsParam;
CMD_CUSTOM_OPPPS_PARAM_STRUCT_T rCmdOppPsParam;
DEBUGFUNC("wlanoidSetOppPsParam");
DBGLOG(INIT, LOUD, "\n");
ASSERT(prAdapter);
ASSERT(pu4SetInfoLen);
*pu4SetInfoLen = sizeof(PARAM_CUSTOM_OPPPS_PARAM_STRUCT_T);
if (u4SetBufferLen < sizeof(PARAM_CUSTOM_OPPPS_PARAM_STRUCT_T))
return WLAN_STATUS_INVALID_LENGTH;
ASSERT(pvSetBuffer);
prOppPsParam = (P_PARAM_CUSTOM_OPPPS_PARAM_STRUCT_T) pvSetBuffer;
kalMemZero(&rCmdOppPsParam, sizeof(CMD_CUSTOM_OPPPS_PARAM_STRUCT_T));
rCmdOppPsParam.u4CTwindowMs = prOppPsParam->u4CTwindowMs;
return wlanSendSetQueryCmd(prAdapter,
CMD_ID_SET_OPPPS_PARAM,
TRUE,
FALSE,
TRUE,
nicCmdEventSetCommon,
nicOidCmdTimeoutCommon,
sizeof(CMD_CUSTOM_OPPPS_PARAM_STRUCT_T),
(PUINT_8) &rCmdOppPsParam, pvSetBuffer, u4SetBufferLen);
}
WLAN_STATUS
wlanoidSetUApsdParam(IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
P_PARAM_CUSTOM_UAPSD_PARAM_STRUCT_T prUapsdParam;
CMD_CUSTOM_UAPSD_PARAM_STRUCT_T rCmdUapsdParam;
P_PM_PROFILE_SETUP_INFO_T prPmProfSetupInfo;
P_BSS_INFO_T prBssInfo;
DEBUGFUNC("wlanoidSetUApsdParam");
DBGLOG(INIT, LOUD, "\n");
ASSERT(prAdapter);
ASSERT(pu4SetInfoLen);
*pu4SetInfoLen = sizeof(PARAM_CUSTOM_UAPSD_PARAM_STRUCT_T);
if (u4SetBufferLen < sizeof(PARAM_CUSTOM_UAPSD_PARAM_STRUCT_T))
return WLAN_STATUS_INVALID_LENGTH;
ASSERT(pvSetBuffer);
prBssInfo = &(prAdapter->rWifiVar.arBssInfo[NETWORK_TYPE_P2P_INDEX]);
prPmProfSetupInfo = &prBssInfo->rPmProfSetupInfo;
prUapsdParam = (P_PARAM_CUSTOM_UAPSD_PARAM_STRUCT_T) pvSetBuffer;
kalMemZero(&rCmdUapsdParam, sizeof(CMD_CUSTOM_OPPPS_PARAM_STRUCT_T));
rCmdUapsdParam.fgEnAPSD = prUapsdParam->fgEnAPSD;
prAdapter->rWifiVar.fgSupportUAPSD = prUapsdParam->fgEnAPSD;
rCmdUapsdParam.fgEnAPSD_AcBe = prUapsdParam->fgEnAPSD_AcBe;
rCmdUapsdParam.fgEnAPSD_AcBk = prUapsdParam->fgEnAPSD_AcBk;
rCmdUapsdParam.fgEnAPSD_AcVo = prUapsdParam->fgEnAPSD_AcVo;
rCmdUapsdParam.fgEnAPSD_AcVi = prUapsdParam->fgEnAPSD_AcVi;
prPmProfSetupInfo->ucBmpDeliveryAC =
((prUapsdParam->fgEnAPSD_AcBe << 0) |
(prUapsdParam->fgEnAPSD_AcBk << 1) |
(prUapsdParam->fgEnAPSD_AcVi << 2) | (prUapsdParam->fgEnAPSD_AcVo << 3));
prPmProfSetupInfo->ucBmpTriggerAC =
((prUapsdParam->fgEnAPSD_AcBe << 0) |
(prUapsdParam->fgEnAPSD_AcBk << 1) |
(prUapsdParam->fgEnAPSD_AcVi << 2) | (prUapsdParam->fgEnAPSD_AcVo << 3));
rCmdUapsdParam.ucMaxSpLen = prUapsdParam->ucMaxSpLen;
prPmProfSetupInfo->ucUapsdSp = prUapsdParam->ucMaxSpLen;
return wlanSendSetQueryCmd(prAdapter,
CMD_ID_SET_UAPSD_PARAM,
TRUE,
FALSE,
TRUE,
nicCmdEventSetCommon,
nicOidCmdTimeoutCommon,
sizeof(CMD_CUSTOM_OPPPS_PARAM_STRUCT_T),
(PUINT_8) &rCmdUapsdParam, pvSetBuffer, u4SetBufferLen);
}
#endif
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to set BT profile or BT information and the
* driver will set the built-in PTA configuration into chip.
*
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[in] pvSetBuffer A pointer to the buffer that holds the data to be set.
* \param[in] u4SetBufferLen The length of the set buffer.
* \param[out] pu4SetInfoLen If the call is successful, returns the number of
* bytes read from the set buffer. If the call failed
* due to invalid length of the set buffer, returns
* the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_INVALID_LENGTH
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidSetBT(IN P_ADAPTER_T prAdapter, IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
P_PTA_IPC_T prPtaIpc;
DEBUGFUNC("wlanoidSetBT.\n");
ASSERT(prAdapter);
ASSERT(pu4SetInfoLen);
*pu4SetInfoLen = sizeof(PTA_IPC_T);
if (u4SetBufferLen != sizeof(PTA_IPC_T)) {
/* WARNLOG(("Invalid length %ld\n", u4SetBufferLen)); */
return WLAN_STATUS_INVALID_LENGTH;
}
if (prAdapter->rAcpiState == ACPI_STATE_D3) {
DBGLOG(REQ, WARN, "Fail to set BT profile because of ACPI_D3\n");
return WLAN_STATUS_ADAPTER_NOT_READY;
}
ASSERT(pvSetBuffer);
prPtaIpc = (P_PTA_IPC_T) pvSetBuffer;
#if CFG_SUPPORT_BCM && CFG_SUPPORT_BCM_BWCS && CFG_SUPPORT_BCM_BWCS_DEBUG
DBGLOG(INIT, INFO, "BCM BWCS CMD: BWCS CMD = %02x%02x%02x%02x\n",
prPtaIpc->u.aucBTPParams[0], prPtaIpc->u.aucBTPParams[1],
prPtaIpc->u.aucBTPParams[2], prPtaIpc->u.aucBTPParams[3]);
DBGLOG(INIT, INFO,
"BCM BWCS CMD: aucBTPParams[0]=%02x, aucBTPParams[1]=%02x, aucBTPParams[2]=%02x, aucBTPParams[3]=%02x.\n",
prPtaIpc->u.aucBTPParams[0], prPtaIpc->u.aucBTPParams[1],
prPtaIpc->u.aucBTPParams[2], prPtaIpc->u.aucBTPParams[3]);
#endif
wlanSendSetQueryCmd(prAdapter,
CMD_ID_SET_BWCS,
TRUE, FALSE, FALSE, NULL, NULL, sizeof(PTA_IPC_T), (PUINT_8) prPtaIpc, NULL, 0);
return WLAN_STATUS_SUCCESS;
}
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to query current BT profile and BTCR values
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[in] pvQueryBuffer Pointer to the buffer that holds the result of
* the query.
* \param[in] u4QueryBufferLen The length of the query buffer.
* \param[out] pu4QueryInfoLen If the call is successful, returns the number of
* bytes written into the query buffer. If the call
* failed due to invalid length of the query buffer,
* returns the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_INVALID_LENGTH
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidQueryBT(IN P_ADAPTER_T prAdapter,
OUT PVOID pvQueryBuffer, IN UINT_32 u4QueryBufferLen, OUT PUINT_32 pu4QueryInfoLen)
{
/* P_PARAM_PTA_IPC_T prPtaIpc; */
/* UINT_32 u4QueryBuffLen; */
ASSERT(prAdapter);
ASSERT(pu4QueryInfoLen);
if (u4QueryBufferLen)
ASSERT(pvQueryBuffer);
*pu4QueryInfoLen = sizeof(PTA_IPC_T);
/* Check for query buffer length */
if (u4QueryBufferLen != sizeof(PTA_IPC_T)) {
DBGLOG(REQ, WARN, "Invalid length %lu\n", u4QueryBufferLen);
return WLAN_STATUS_INVALID_LENGTH;
}
ASSERT(pvQueryBuffer);
/* prPtaIpc = (P_PTA_IPC_T)pvQueryBuffer; */
/* prPtaIpc->ucCmd = BT_CMD_PROFILE; */
/* prPtaIpc->ucLen = sizeof(prPtaIpc->u); */
/* nicPtaGetProfile(prAdapter, (PUINT_8)&prPtaIpc->u, &u4QueryBuffLen); */
return WLAN_STATUS_SUCCESS;
}
#if 0
WLAN_STATUS
wlanoidQueryBtSingleAntenna(IN P_ADAPTER_T prAdapter,
OUT PVOID pvQueryBuffer, IN UINT_32 u4QueryBufferLen, OUT PUINT_32 pu4QueryInfoLen)
{
P_PTA_INFO_T prPtaInfo;
PUINT_32 pu4SingleAntenna;
ASSERT(prAdapter);
ASSERT(pu4QueryInfoLen);
if (u4QueryBufferLen)
ASSERT(pvQueryBuffer);
*pu4QueryInfoLen = sizeof(UINT_32);
/* Check for query buffer length */
if (u4QueryBufferLen != sizeof(UINT_32)) {
DBGLOG(REQ, WARN, "Invalid length %lu\n", u4QueryBufferLen);
return WLAN_STATUS_INVALID_LENGTH;
}
ASSERT(pvQueryBuffer);
prPtaInfo = &prAdapter->rPtaInfo;
pu4SingleAntenna = (PUINT_32) pvQueryBuffer;
if (prPtaInfo->fgSingleAntenna) {
/* DBGLOG(INIT, INFO, (KERN_WARNING DRV_NAME"Q Single Ant = 1\r\n")); */
*pu4SingleAntenna = 1;
} else {
/* DBGLOG(INIT, INFO, (KERN_WARNING DRV_NAME"Q Single Ant = 0\r\n")); */
*pu4SingleAntenna = 0;
}
return WLAN_STATUS_SUCCESS;
}
WLAN_STATUS
wlanoidSetBtSingleAntenna(IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
PUINT_32 pu4SingleAntenna;
UINT_32 u4SingleAntenna;
P_PTA_INFO_T prPtaInfo;
ASSERT(prAdapter);
ASSERT(pu4SetInfoLen);
prPtaInfo = &prAdapter->rPtaInfo;
*pu4SetInfoLen = sizeof(UINT_32);
if (u4SetBufferLen != sizeof(UINT_32))
return WLAN_STATUS_INVALID_LENGTH;
if (IS_ARB_IN_RFTEST_STATE(prAdapter))
return WLAN_STATUS_SUCCESS;
if (prAdapter->rAcpiState == ACPI_STATE_D3) {
DBGLOG(REQ, WARN, "Fail to set antenna because of ACPI_D3\n");
return WLAN_STATUS_ADAPTER_NOT_READY;
}
ASSERT(pvSetBuffer);
pu4SingleAntenna = (PUINT_32) pvSetBuffer;
u4SingleAntenna = *pu4SingleAntenna;
if (u4SingleAntenna == 0) {
/* DBGLOG(INIT, INFO, (KERN_WARNING DRV_NAME"Set Single Ant = 0\r\n")); */
prPtaInfo->fgSingleAntenna = FALSE;
} else {
/* DBGLOG(INIT, INFO, (KERN_WARNING DRV_NAME"Set Single Ant = 1\r\n")); */
prPtaInfo->fgSingleAntenna = TRUE;
}
ptaFsmRunEventSetConfig(prAdapter, &prPtaInfo->rPtaParam);
return WLAN_STATUS_SUCCESS;
}
#if CFG_SUPPORT_BCM && CFG_SUPPORT_BCM_BWCS
WLAN_STATUS
wlanoidQueryPta(IN P_ADAPTER_T prAdapter,
OUT PVOID pvQueryBuffer, IN UINT_32 u4QueryBufferLen, OUT PUINT_32 pu4QueryInfoLen)
{
P_PTA_INFO_T prPtaInfo;
PUINT_32 pu4Pta;
ASSERT(prAdapter);
ASSERT(pu4QueryInfoLen);
if (u4QueryBufferLen)
ASSERT(pvQueryBuffer);
*pu4QueryInfoLen = sizeof(UINT_32);
/* Check for query buffer length */
if (u4QueryBufferLen != sizeof(UINT_32)) {
DBGLOG(REQ, WARN, "Invalid length %lu\n", u4QueryBufferLen);
return WLAN_STATUS_INVALID_LENGTH;
}
ASSERT(pvQueryBuffer);
prPtaInfo = &prAdapter->rPtaInfo;
pu4Pta = (PUINT_32) pvQueryBuffer;
if (prPtaInfo->fgEnabled) {
/* DBGLOG(INIT, INFO, (KERN_WARNING DRV_NAME"PTA = 1\r\n")); */
*pu4Pta = 1;
} else {
/* DBGLOG(INIT, INFO, (KERN_WARNING DRV_NAME"PTA = 0\r\n")); */
*pu4Pta = 0;
}
return WLAN_STATUS_SUCCESS;
}
WLAN_STATUS
wlanoidSetPta(IN P_ADAPTER_T prAdapter, IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
PUINT_32 pu4PtaCtrl;
UINT_32 u4PtaCtrl;
ASSERT(prAdapter);
ASSERT(pu4SetInfoLen);
*pu4SetInfoLen = sizeof(UINT_32);
if (u4SetBufferLen != sizeof(UINT_32))
return WLAN_STATUS_INVALID_LENGTH;
if (IS_ARB_IN_RFTEST_STATE(prAdapter))
return WLAN_STATUS_SUCCESS;
if (prAdapter->rAcpiState == ACPI_STATE_D3) {
DBGLOG(REQ, WARN, "Fail to set BT setting because of ACPI_D3\n");
return WLAN_STATUS_ADAPTER_NOT_READY;
}
ASSERT(pvSetBuffer);
pu4PtaCtrl = (PUINT_32) pvSetBuffer;
u4PtaCtrl = *pu4PtaCtrl;
if (u4PtaCtrl == 0) {
/* DBGLOG(INIT, INFO, (KERN_WARNING DRV_NAME"Set Pta= 0\r\n")); */
nicPtaSetFunc(prAdapter, FALSE);
} else {
/* DBGLOG(INIT, INFO, (KERN_WARNING DRV_NAME"Set Pta= 1\r\n")); */
nicPtaSetFunc(prAdapter, TRUE);
}
return WLAN_STATUS_SUCCESS;
}
#endif
#endif
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to set Tx power profile.
*
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[in] pvSetBuffer A pointer to the buffer that holds the data to be set.
* \param[in] u4SetBufferLen The length of the set buffer.
* \param[out] pu4SetInfoLen If the call is successful, returns the number of
* bytes read from the set buffer. If the call failed
* due to invalid length of the set buffer, returns
* the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_INVALID_LENGTH
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidSetTxPower(IN P_ADAPTER_T prAdapter, IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
P_SET_TXPWR_CTRL_T pTxPwr = (P_SET_TXPWR_CTRL_T) pvSetBuffer;
P_SET_TXPWR_CTRL_T prCmd;
UINT_32 i;
WLAN_STATUS rStatus;
DEBUGFUNC("wlanoidSetTxPower");
DBGLOG(REQ, LOUD, "\r\n");
prCmd = cnmMemAlloc(prAdapter, RAM_TYPE_BUF, sizeof(SET_TXPWR_CTRL_T));
kalMemZero(prCmd, sizeof(SET_TXPWR_CTRL_T));
prCmd->c2GLegacyStaPwrOffset = pTxPwr->c2GLegacyStaPwrOffset;
prCmd->c2GHotspotPwrOffset = pTxPwr->c2GHotspotPwrOffset;
prCmd->c2GP2pPwrOffset = pTxPwr->c2GP2pPwrOffset;
prCmd->c2GBowPwrOffset = pTxPwr->c2GBowPwrOffset;
prCmd->c5GLegacyStaPwrOffset = pTxPwr->c5GLegacyStaPwrOffset;
prCmd->c5GHotspotPwrOffset = pTxPwr->c5GHotspotPwrOffset;
prCmd->c5GP2pPwrOffset = pTxPwr->c5GP2pPwrOffset;
prCmd->c5GBowPwrOffset = pTxPwr->c5GBowPwrOffset;
prCmd->ucConcurrencePolicy = pTxPwr->ucConcurrencePolicy;
for (i = 0; i < 14; i++)
prCmd->acTxPwrLimit2G[i] = pTxPwr->acTxPwrLimit2G[i];
for (i = 0; i < 4; i++)
prCmd->acTxPwrLimit5G[i] = pTxPwr->acTxPwrLimit5G[i];
ASSERT(prAdapter);
ASSERT(pvSetBuffer);
#if 0
DBGLOG(INIT, INFO, "c2GLegacyStaPwrOffset=%d\n", pTxPwr->c2GLegacyStaPwrOffset);
DBGLOG(INIT, INFO, "c2GHotspotPwrOffset=%d\n", pTxPwr->c2GHotspotPwrOffset);
DBGLOG(INIT, INFO, "c2GP2pPwrOffset=%d\n", pTxPwr->c2GP2pPwrOffset);
DBGLOG(INIT, INFO, "c2GBowPwrOffset=%d\n", pTxPwr->c2GBowPwrOffset);
DBGLOG(INIT, INFO, "c5GLegacyStaPwrOffset=%d\n", pTxPwr->c5GLegacyStaPwrOffset);
DBGLOG(INIT, INFO, "c5GHotspotPwrOffset=%d\n", pTxPwr->c5GHotspotPwrOffset);
DBGLOG(INIT, INFO, "c5GP2pPwrOffset=%d\n", pTxPwr->c5GP2pPwrOffset);
DBGLOG(INIT, INFO, "c5GBowPwrOffset=%d\n", pTxPwr->c5GBowPwrOffset);
DBGLOG(INIT, INFO, "ucConcurrencePolicy=%d\n", pTxPwr->ucConcurrencePolicy);
for (i = 0; i < 14; i++)
DBGLOG(INIT, INFO, "acTxPwrLimit2G[%d]=%d\n", i, pTxPwr->acTxPwrLimit2G[i]);
for (i = 0; i < 4; i++)
DBGLOG(INIT, INFO, "acTxPwrLimit5G[%d]=%d\n", i, pTxPwr->acTxPwrLimit5G[i]);
#endif
rStatus = wlanSendSetQueryCmd(prAdapter, /* prAdapter */
CMD_ID_SET_TXPWR_CTRL, /* ucCID */
TRUE, /* fgSetQuery */
FALSE, /* fgNeedResp */
TRUE, /* fgIsOid */
nicCmdEventSetCommon, nicOidCmdTimeoutCommon,
sizeof(SET_TXPWR_CTRL_T), /* u4SetQueryInfoLen */
(PUINT_8) prCmd, /* pucInfoBuffer */
NULL, /* pvSetQueryBuffer */
0 /* u4SetQueryBufferLen */
);
/* ASSERT(rStatus == WLAN_STATUS_PENDING); */
cnmMemFree(prAdapter, prCmd);
return rStatus;
}
WLAN_STATUS wlanSendMemDumpCmd(IN P_ADAPTER_T prAdapter, IN PVOID pvQueryBuffer, IN UINT_32 u4QueryBufferLen)
{
P_PARAM_CUSTOM_MEM_DUMP_STRUCT_T prMemDumpInfo;
P_CMD_DUMP_MEM prCmdDumpMem;
CMD_DUMP_MEM rCmdDumpMem;
WLAN_STATUS rStatus = WLAN_STATUS_SUCCESS;
UINT_32 u4MemSize = PARAM_MEM_DUMP_MAX_SIZE;
UINT_32 u4RemainLeng = 0;
UINT_32 u4CurAddr = 0;
UINT_8 ucFragNum = 0;
prCmdDumpMem = &rCmdDumpMem;
prMemDumpInfo = (P_PARAM_CUSTOM_MEM_DUMP_STRUCT_T) pvQueryBuffer;
u4RemainLeng = prMemDumpInfo->u4RemainLength;
u4CurAddr = prMemDumpInfo->u4Address + prMemDumpInfo->u4Length;
ucFragNum = prMemDumpInfo->ucFragNum + 1;
/* Query. If request length is larger than max length, do it as ping pong.
* Send a command and wait for a event. Send next command while the event is received.
*
*/
do {
UINT_32 u4CurLeng = 0;
if (u4RemainLeng > u4MemSize) {
u4CurLeng = u4MemSize;
u4RemainLeng -= u4MemSize;
} else {
u4CurLeng = u4RemainLeng;
u4RemainLeng = 0;
}
prCmdDumpMem->u4Address = u4CurAddr;
prCmdDumpMem->u4Length = u4CurLeng;
prCmdDumpMem->u4RemainLength = u4RemainLeng;
prCmdDumpMem->ucFragNum = ucFragNum;
#if CFG_SUPPORT_QA_TOOL
prCmdDumpMem->u4IcapContent = prMemDumpInfo->u4IcapContent;
#endif /* CFG_SUPPORT_QA_TOOL */
DBGLOG(REQ, TRACE, "[%d] 0x%lX, len %lu, remain len %lu\n",
ucFragNum, prCmdDumpMem->u4Address, prCmdDumpMem->u4Length, prCmdDumpMem->u4RemainLength);
rStatus = wlanSendSetQueryCmd(prAdapter,
CMD_ID_DUMP_MEM,
FALSE,
TRUE,
TRUE,
nicCmdEventQueryMemDump,
nicOidCmdTimeoutCommon,
sizeof(CMD_DUMP_MEM),
(PUINT_8) prCmdDumpMem, pvQueryBuffer, u4QueryBufferLen);
} while (FALSE);
return rStatus;
}
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to dump memory.
*
* \param[in] pvAdapter Pointer to the Adapter structure.
* \param[out] pvQueryBuf A pointer to the buffer that holds the result of
* the query.
* \param[in] u4QueryBufLen The length of the query buffer.
* \param[out] pu4QueryInfoLen If the call is successful, returns the number of
* bytes written into the query buffer. If the call
* failed due to invalid length of the query buffer,
* returns the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_INVALID_LENGTH
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidQueryMemDump(IN P_ADAPTER_T prAdapter,
IN PVOID pvQueryBuffer, IN UINT_32 u4QueryBufferLen, OUT PUINT_32 pu4QueryInfoLen)
{
P_PARAM_CUSTOM_MEM_DUMP_STRUCT_T prMemDumpInfo;
DEBUGFUNC("wlanoidQueryMemDump");
DBGLOG(INIT, LOUD, "\n");
ASSERT(prAdapter);
ASSERT(pu4QueryInfoLen);
if (u4QueryBufferLen)
ASSERT(pvQueryBuffer);
*pu4QueryInfoLen = sizeof(UINT_32);
prMemDumpInfo = (P_PARAM_CUSTOM_MEM_DUMP_STRUCT_T) pvQueryBuffer;
DBGLOG(REQ, TRACE, "Dump 0x%lX, len %lu\n", prMemDumpInfo->u4Address, prMemDumpInfo->u4Length);
prMemDumpInfo->u4RemainLength = prMemDumpInfo->u4Length;
prMemDumpInfo->u4Length = 0;
prMemDumpInfo->ucFragNum = 0;
return wlanSendMemDumpCmd(prAdapter, pvQueryBuffer, u4QueryBufferLen);
} /* end of wlanoidQueryMcrRead() */
#if CFG_ENABLE_WIFI_DIRECT
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is used to set the p2p mode.
*
* \param[in] pvAdapter Pointer to the Adapter structure.
* \param[in] pvSetBuffer A pointer to the buffer that holds the data to be set.
* \param[in] u4SetBufferLen The length of the set buffer.
* \param[out] pu4SetInfoLen If the call is successful, returns the number of
* bytes read from the set buffer. If the call failed
* due to invalid length of the set buffer, returns
* the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_INVALID_LENGTH
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidSetP2pMode(IN P_ADAPTER_T prAdapter, IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
WLAN_STATUS status = WLAN_STATUS_SUCCESS;
P_PARAM_CUSTOM_P2P_SET_STRUCT_T prSetP2P = (P_PARAM_CUSTOM_P2P_SET_STRUCT_T) NULL;
/* P_MSG_P2P_NETDEV_REGISTER_T prP2pNetdevRegMsg = (P_MSG_P2P_NETDEV_REGISTER_T)NULL; */
DEBUGFUNC("wlanoidSetP2pMode");
ASSERT(prAdapter);
ASSERT(pu4SetInfoLen);
*pu4SetInfoLen = sizeof(PARAM_CUSTOM_P2P_SET_STRUCT_T);
if (u4SetBufferLen < sizeof(PARAM_CUSTOM_P2P_SET_STRUCT_T)) {
DBGLOG(REQ, WARN, "Invalid length %ld\n", u4SetBufferLen);
return WLAN_STATUS_INVALID_LENGTH;
}
prSetP2P = (P_PARAM_CUSTOM_P2P_SET_STRUCT_T) pvSetBuffer;
DBGLOG(P2P, INFO, "Set P2P enable[%ld] mode[%ld]\n", prSetP2P->u4Enable, prSetP2P->u4Mode);
/*
* enable = 1, mode = 0 => init P2P network
* enable = 1, mode = 1 => init Soft AP network
* enable = 0 => uninit P2P/AP network
* enable = 1, mode = 2 => init dual Soft AP network
* enable = 1, mode = 3 => init AP+P2P network
*/
DBGLOG(P2P, INFO, "P2P Compile as (%d)p2p-like interface\n", KAL_P2P_NUM);
if (prSetP2P->u4Mode >= RUNNING_P2P_MODE_NUM) {
DBGLOG(P2P, ERROR, "P2P interface mode(%d) is wrong\n", prSetP2P->u4Mode);
ASSERT(0);
}
if (prSetP2P->u4Enable) {
p2pSetMode(prSetP2P->u4Mode);
if (p2pLaunch(prAdapter->prGlueInfo)) {
/* ToDo:: ASSERT */
ASSERT(prAdapter->fgIsP2PRegistered);
} else {
status = WLAN_STATUS_FAILURE;
}
} else {
if (prAdapter->fgIsP2PRegistered)
p2pRemove(prAdapter->prGlueInfo);
}
#if 0
prP2pNetdevRegMsg = (P_MSG_P2P_NETDEV_REGISTER_T) cnmMemAlloc(prAdapter,
RAM_TYPE_MSG,
(sizeof(MSG_P2P_NETDEV_REGISTER_T)));
if (prP2pNetdevRegMsg == NULL) {
ASSERT(FALSE);
status = WLAN_STATUS_RESOURCES;
return status;
}
prP2pNetdevRegMsg->rMsgHdr.eMsgId = MID_MNY_P2P_NET_DEV_REGISTER;
prP2pNetdevRegMsg->fgIsEnable = (prSetP2P->u4Enable == 1) ? TRUE : FALSE;
prP2pNetdevRegMsg->ucMode = (UINT_8) prSetP2P->u4Mode;
mboxSendMsg(prAdapter, MBOX_ID_0, (P_MSG_HDR_T) prP2pNetdevRegMsg, MSG_SEND_METHOD_BUF);
#endif
return status;
}
#endif
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to set the GTK rekey data
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[in] pvSetBuffer A pointer to the buffer that holds the data to be set.
* \param[in] u4SetBufferLen The length of the set buffer.
* \param[out] pu4SetInfoLen If the call is successful, returns the number of
* bytes read from the set buffer. If the call failed
* due to invalid length of the set buffer, returns
* the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_BUFFER_TOO_SHORT
* \retval WLAN_STATUS_INVALID_DATA
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidSetGtkRekeyData(IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
P_GLUE_INFO_T prGlueInfo;
P_CMD_INFO_T prCmdInfo;
P_WIFI_CMD_T prWifiCmd;
UINT_8 ucCmdSeqNum;
P_BSS_INFO_T prBssInfo;
DBGLOG(REQ, INFO, "wlanoidSetGtkRekeyData\n");
ASSERT(prAdapter);
ASSERT(pvSetBuffer);
ASSERT(pu4SetInfoLen);
if (prAdapter->rAcpiState == ACPI_STATE_D3) {
DBGLOG(RSN, WARN, "Fail in set rekey! (Adapter not ready). ACPI=D%d, Radio=%d\n",
prAdapter->rAcpiState, prAdapter->fgIsRadioOff);
return WLAN_STATUS_ADAPTER_NOT_READY;
}
prBssInfo = prAdapter->prAisBssInfo;
*pu4SetInfoLen = u4SetBufferLen;
prGlueInfo = prAdapter->prGlueInfo;
prCmdInfo = cmdBufAllocateCmdInfo(prAdapter, (CMD_HDR_SIZE + sizeof(PARAM_GTK_REKEY_DATA)));
if (!prCmdInfo) {
DBGLOG(INIT, ERROR, "Allocate CMD_INFO_T ==> FAILED.\n");
return WLAN_STATUS_FAILURE;
}
/* increase command sequence number */
ucCmdSeqNum = nicIncreaseCmdSeqNum(prAdapter);
DBGLOG(REQ, INFO, "ucCmdSeqNum = %d\n", ucCmdSeqNum);
/* compose PARAM_GTK_REKEY_DATA cmd pkt */
prCmdInfo->eCmdType = COMMAND_TYPE_NETWORK_IOCTL;
prCmdInfo->u2InfoBufLen = CMD_HDR_SIZE + sizeof(PARAM_GTK_REKEY_DATA);
prCmdInfo->pfCmdDoneHandler = nicCmdEventSetCommon;
prCmdInfo->pfCmdTimeoutHandler = nicOidCmdTimeoutCommon;
prCmdInfo->fgIsOid = TRUE;
prCmdInfo->ucCID = CMD_ID_SET_GTK_REKEY_DATA;
prCmdInfo->fgSetQuery = TRUE;
prCmdInfo->fgNeedResp = FALSE;
prCmdInfo->ucCmdSeqNum = ucCmdSeqNum;
prCmdInfo->u4SetInfoLen = u4SetBufferLen;
prCmdInfo->pvInformationBuffer = pvSetBuffer;
prCmdInfo->u4InformationBufferLength = u4SetBufferLen;
/* Setup WIFI_CMD_T */
prWifiCmd = (P_WIFI_CMD_T) (prCmdInfo->pucInfoBuffer);
prWifiCmd->u2TxByteCount = prCmdInfo->u2InfoBufLen;
prWifiCmd->u2PQ_ID = CMD_PQ_ID;
prWifiCmd->ucPktTypeID = CMD_PACKET_TYPE_ID;
prWifiCmd->ucCID = prCmdInfo->ucCID;
prWifiCmd->ucSetQuery = prCmdInfo->fgSetQuery;
prWifiCmd->ucSeqNum = prCmdInfo->ucCmdSeqNum;
kalMemCopy(prWifiCmd->aucBuffer, (PUINT_8) pvSetBuffer, u4SetBufferLen);
/* insert into prCmdQueue */
kalEnqueueCommand(prGlueInfo, (P_QUE_ENTRY_T) prCmdInfo);
/* wakeup txServiceThread later */
GLUE_SET_EVENT(prGlueInfo);
return WLAN_STATUS_PENDING;
} /* wlanoidSetGtkRekeyData */
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to request starting of schedule scan
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[in] pvSetBuffer A pointer to the buffer that holds the data to be set.
* \param[in] u4SetBufferLen The length of the set buffer.
* \param[out] pu4SetInfoLen If the call is successful, returns the number of
* bytes read from the set buffer. If the call failed
* due to invalid length of the set buffer, returns
* the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_ADAPTER_NOT_READY
* \retval WLAN_STATUS_INVALID_LENGTH
* \retval WLAN_STATUS_INVALID_DATA
*
* \note The setting buffer PARAM_SCHED_SCAN_REQUEST_EXT_T
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidSetStartSchedScan(IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
P_PARAM_SCHED_SCAN_REQUEST prSchedScanRequest;
DEBUGFUNC("wlanoidSetStartSchedScan()");
if (prAdapter->rAcpiState == ACPI_STATE_D3) {
DBGLOG(REQ, WARN,
"Fail in set scheduled scan! (Adapter not ready). ACPI=D%d, Radio=%d\n",
prAdapter->rAcpiState, prAdapter->fgIsRadioOff);
return WLAN_STATUS_ADAPTER_NOT_READY;
}
ASSERT(pu4SetInfoLen);
*pu4SetInfoLen = 0;
if (u4SetBufferLen != sizeof(PARAM_SCHED_SCAN_REQUEST))
return WLAN_STATUS_INVALID_LENGTH;
else if (pvSetBuffer == NULL)
return WLAN_STATUS_INVALID_DATA;
else if (kalGetMediaStateIndicated(prAdapter->prGlueInfo) == PARAM_MEDIA_STATE_CONNECTED
&& prAdapter->fgEnOnlineScan == FALSE)
return WLAN_STATUS_FAILURE;
if (prAdapter->fgIsRadioOff) {
DBGLOG(REQ, WARN, "Return from BSSID list scan! (radio off). ACPI=D%d, Radio=%d\n",
prAdapter->rAcpiState, prAdapter->fgIsRadioOff);
return WLAN_STATUS_SUCCESS;
}
prSchedScanRequest = (P_PARAM_SCHED_SCAN_REQUEST) pvSetBuffer;
if (scnFsmSchedScanRequest(prAdapter,
(UINT_8) (prSchedScanRequest->u4SsidNum),
prSchedScanRequest->arSsid,
prSchedScanRequest->u4IELength,
prSchedScanRequest->pucIE, prSchedScanRequest->u2ScanInterval) == TRUE)
return WLAN_STATUS_PENDING;
else
return WLAN_STATUS_FAILURE;
}
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to request termination of schedule scan
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[in] pvSetBuffer A pointer to the buffer that holds the data to be set.
* \param[in] u4SetBufferLen The length of the set buffer.
* \param[out] pu4SetInfoLen If the call is successful, returns the number of
* bytes read from the set buffer. If the call failed
* due to invalid length of the set buffer, returns
* the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_ADAPTER_NOT_READY
* \retval WLAN_STATUS_INVALID_LENGTH
* \retval WLAN_STATUS_INVALID_DATA
*
* \note The setting buffer PARAM_SCHED_SCAN_REQUEST_EXT_T
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidSetStopSchedScan(IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
ASSERT(prAdapter);
/* ask SCN module to stop scan request */
if (scnFsmSchedScanStopRequest(prAdapter) == TRUE)
return WLAN_STATUS_PENDING;
else
return WLAN_STATUS_FAILURE;
}
#if CFG_M0VE_BA_TO_DRIVER
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to reset BA scoreboard.
*
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[in] pvSetBuffer A pointer to the buffer that holds the data to be set.
* \param[in] u4SetBufferLen The length of the set buffer.
* \param[out] pu4SetInfoLen If the call is successful, returns the number of
* bytes read from the set buffer. If the call failed
* due to invalid length of the set buffer, returns
* the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_INVALID_LENGTH
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS wlanoidResetBAScoreboard(IN P_ADAPTER_T prAdapter, IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen)
{
WLAN_STATUS rStatus;
DEBUGFUNC("wlanoidResetBAScoreboard");
DBGLOG(REQ, WARN, "[Puff]wlanoidResetBAScoreboard\n");
ASSERT(prAdapter);
ASSERT(pvSetBuffer);
rStatus = wlanSendSetQueryCmd(prAdapter, /* prAdapter */
CMD_ID_RESET_BA_SCOREBOARD, /* ucCID */
TRUE, /* fgSetQuery */
FALSE, /* fgNeedResp */
TRUE, /* fgIsOid */
NULL, /* pfCmdDoneHandler */
NULL, /* pfCmdTimeoutHandler */
u4SetBufferLen, /* u4SetQueryInfoLen */
(PUINT_8) pvSetBuffer, /* pucInfoBuffer */
NULL, /* pvSetQueryBuffer */
0 /* u4SetQueryBufferLen */
);
/* ASSERT(rStatus == WLAN_STATUS_PENDING); */
return rStatus;
}
#endif
#if CFG_SUPPORT_BATCH_SCAN
#define CMD_WLS_BATCHING "WLS_BATCHING"
#define BATCHING_SET "SET"
#define BATCHING_GET "GET"
#define BATCHING_STOP "STOP"
#define PARAM_SCANFREQ "SCANFREQ"
#define PARAM_MSCAN "MSCAN"
#define PARAM_BESTN "BESTN"
#define PARAM_CHANNEL "CHANNEL"
#define PARAM_RTT "RTT"
WLAN_STATUS
batchSetCmd(IN P_ADAPTER_T prAdapter, IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4WritenLen)
{
P_CHANNEL_INFO_T prRfChannelInfo;
CMD_BATCH_REQ_T rCmdBatchReq;
WLAN_STATUS rStatus = WLAN_STATUS_SUCCESS;
PCHAR head, p, p2;
UINT_32 tokens;
INT_32 scanfreq, mscan, bestn, rtt;
char *pcTemp;
/* CHAR c_scanfreq[4], c_mscan[4], c_bestn[4], c_rtt[4], c_channel[100]; */
/* INT32 ch_type; */
UINT_32 u4Value = 0;
INT_32 i4Ret = 0;
DBGLOG(SCN, TRACE, "[BATCH] command=%s, len=%d\n", pvSetBuffer, u4SetBufferLen);
if (!pu4WritenLen)
return -EINVAL;
*pu4WritenLen = 0;
if (u4SetBufferLen < kalStrLen(CMD_WLS_BATCHING)) {
DBGLOG(SCN, TRACE, "[BATCH] invalid len %d\n", u4SetBufferLen);
return -EINVAL;
}
head = pvSetBuffer + kalStrLen(CMD_WLS_BATCHING) + 1;
kalMemSet(&rCmdBatchReq, 0, sizeof(CMD_BATCH_REQ_T));
if (!kalStrnCmp(head, BATCHING_SET, kalStrLen(BATCHING_SET))) {
DBGLOG(SCN, TRACE, "XXX Start Batch Scan XXX\n");
head += kalStrLen(BATCHING_SET) + 1;
/* SCANFREQ, MSCAN, BESTN */
tokens = sscanf(head, "SCANFREQ=%ld MSCAN=%ld BESTN=%ld", &scanfreq, &mscan, &bestn);
if (tokens != 3) {
DBGLOG(SCN, TRACE,
"[BATCH] Parse fail: tokens=%d, SCANFREQ=%d MSCAN=%d BESTN=%d\n",
tokens, scanfreq, mscan, bestn);
return -EINVAL;
}
/* RTT */
p = kalStrStr(head, PARAM_RTT);
if (!p) {
DBGLOG(SCN, TRACE, "[BATCH] Parse RTT fail. head=%s\n", head);
return -EINVAL;
}
tokens = sscanf(p, "RTT=%d", &rtt);
if (tokens != 1) {
DBGLOG(SCN, TRACE, "[BATCH] Parse fail: tokens=%d, rtt=%d\n", tokens, rtt);
return -EINVAL;
}
/* CHANNEL */
p = kalStrStr(head, PARAM_CHANNEL);
if (!p) {
DBGLOG(SCN, TRACE, "[BATCH] Parse CHANNEL fail(1)\n");
return -EINVAL;
}
head = p;
p = kalStrChr(head, '>');
if (!p) {
DBGLOG(SCN, TRACE, "[BATCH] Parse CHANNEL fail(2)\n");
return -EINVAL;
}
/* else {
*p = '.'; // remove '>' because sscanf can not parse <%s>
*}
*/
/*tokens = sscanf(head, "CHANNEL=<%s", c_channel);
* if (tokens != 1) {
* DBGLOG(SCN, TRACE, "[BATCH] Parse fail: tokens=%d, CHANNEL=<%s>\n",
* tokens, c_channel);
* return -EINVAL;
* }
*/
rCmdBatchReq.ucChannelType = SCAN_CHANNEL_SPECIFIED;
rCmdBatchReq.ucChannelListNum = 0;
prRfChannelInfo = &rCmdBatchReq.arChannelList[0];
p = head + kalStrLen(PARAM_CHANNEL) + 2; /* c_channel; */
pcTemp = (char *)p;
while ((p2 = kalStrSep(&pcTemp, ",")) != NULL) {
if (p2 == NULL || *p2 == 0)
break;
if (*p2 == '\0')
continue;
if (*p2 == 'A') {
rCmdBatchReq.ucChannelType =
rCmdBatchReq.ucChannelType ==
SCAN_CHANNEL_2G4 ? SCAN_CHANNEL_FULL : SCAN_CHANNEL_5G;
} else if (*p2 == 'B') {
rCmdBatchReq.ucChannelType =
rCmdBatchReq.ucChannelType ==
SCAN_CHANNEL_5G ? SCAN_CHANNEL_FULL : SCAN_CHANNEL_2G4;
} else {
/* Translate Freq from MHz to channel number. */
/* prRfChannelInfo->ucChannelNum = kalStrtol(p2, NULL, 0); */
i4Ret = kalkStrtou32(p2, 0, &u4Value);
if (i4Ret)
DBGLOG(SCN, TRACE, "parse ucChannelNum error i4Ret=%d\n", i4Ret);
prRfChannelInfo->ucChannelNum = (UINT_8) u4Value;
DBGLOG(SCN, TRACE, "Scanning Channel:%d, freq: %d\n",
prRfChannelInfo->ucChannelNum,
nicChannelNum2Freq(prRfChannelInfo->ucChannelNum));
prRfChannelInfo->ucBand = prRfChannelInfo->ucChannelNum < 15 ? BAND_2G4 : BAND_5G;
rCmdBatchReq.ucChannelListNum++;
if (rCmdBatchReq.ucChannelListNum >= 32)
break;
prRfChannelInfo++;
}
}
/* set channel for test */
#if 0
rCmdBatchReq.ucChannelType = 4; /* SCAN_CHANNEL_SPECIFIED; */
rCmdBatchReq.ucChannelListNum = 0;
prRfChannelInfo = &rCmdBatchReq.arChannelList[0];
for (i = 1; i <= 14; i++) {
/* filter out some */
if (i == 1 || i == 5 || i == 11)
continue;
/* Translate Freq from MHz to channel number. */
prRfChannelInfo->ucChannelNum = i;
DBGLOG(SCN, TRACE, "Scanning Channel:%d, freq: %d\n",
prRfChannelInfo->ucChannelNum, nicChannelNum2Freq(prRfChannelInfo->ucChannelNum));
prRfChannelInfo->ucBand = BAND_2G4;
rCmdBatchReq.ucChannelListNum++;
prRfChannelInfo++;
}
#endif
#if 0
rCmdBatchReq.ucChannelType = 0; /* SCAN_CHANNEL_FULL; */
#endif
rCmdBatchReq.u4Scanfreq = scanfreq;
rCmdBatchReq.ucMScan = mscan > CFG_BATCH_MAX_MSCAN ? CFG_BATCH_MAX_MSCAN : mscan;
rCmdBatchReq.ucBestn = bestn;
rCmdBatchReq.ucRtt = rtt;
DBGLOG(SCN, TRACE, "[BATCH] SCANFREQ=%d MSCAN=%d BESTN=%d RTT=%d\n",
rCmdBatchReq.u4Scanfreq, rCmdBatchReq.ucMScan, rCmdBatchReq.ucBestn, rCmdBatchReq.ucRtt);
if (rCmdBatchReq.ucChannelType != SCAN_CHANNEL_SPECIFIED) {
DBGLOG(SCN, TRACE, "[BATCH] CHANNELS = %s\n",
rCmdBatchReq.ucChannelType ==
SCAN_CHANNEL_FULL ? "FULL" : rCmdBatchReq.ucChannelType ==
SCAN_CHANNEL_2G4 ? "2.4G all" : "5G all");
} else {
DBGLOG(SCN, TRACE, "[BATCH] CHANNEL list\n");
prRfChannelInfo = &rCmdBatchReq.arChannelList[0];
for (tokens = 0; tokens < rCmdBatchReq.ucChannelListNum; tokens++) {
DBGLOG(SCN, TRACE, "[BATCH] %s, %d\n",
prRfChannelInfo->ucBand ==
BAND_2G4 ? "2.4G" : "5G", prRfChannelInfo->ucChannelNum);
prRfChannelInfo++;
}
}
rCmdBatchReq.ucSeqNum = 1;
rCmdBatchReq.ucNetTypeIndex = KAL_NETWORK_TYPE_AIS_INDEX;
rCmdBatchReq.ucCmd = SCAN_BATCH_REQ_START;
*pu4WritenLen = kalSnprintf(pvSetBuffer, 3, "%d", rCmdBatchReq.ucMScan);
} else if (!kalStrnCmp(head, BATCHING_STOP, kalStrLen(BATCHING_STOP))) {
DBGLOG(SCN, TRACE, "XXX Stop Batch Scan XXX\n");
rCmdBatchReq.ucSeqNum = 1;
rCmdBatchReq.ucNetTypeIndex = KAL_NETWORK_TYPE_AIS_INDEX;
rCmdBatchReq.ucCmd = SCAN_BATCH_REQ_STOP;
} else {
return -EINVAL;
}
wlanSendSetQueryCmd(prAdapter,
CMD_ID_SET_BATCH_REQ,
TRUE, FALSE, TRUE, NULL, NULL, sizeof(CMD_BATCH_REQ_T), (PUINT_8) &rCmdBatchReq, NULL, 0);
/* kalMemSet(pvSetBuffer, 0, u4SetBufferLen); */
/* rStatus = kalSnprintf(pvSetBuffer, 2, "%s", "OK"); */
/* exit: */
return rStatus;
}
WLAN_STATUS
batchGetCmd(IN P_ADAPTER_T prAdapter,
OUT PVOID pvQueryBuffer, IN UINT_32 u4QueryBufferLen, OUT PUINT_32 pu4QueryInfoLen)
{
CMD_BATCH_REQ_T rCmdBatchReq;
WLAN_STATUS rStatus = WLAN_STATUS_SUCCESS;
P_EVENT_BATCH_RESULT_T prEventBatchResult;
/* UINT_32 i; */
ASSERT(prAdapter);
ASSERT(pu4QueryInfoLen);
if (u4QueryBufferLen)
ASSERT(pvQueryBuffer);
prEventBatchResult = (P_EVENT_BATCH_RESULT_T) pvQueryBuffer;
DBGLOG(SCN, TRACE, "XXX Get Batch Scan Result (%d) XXX\n", prEventBatchResult->ucScanCount);
*pu4QueryInfoLen = sizeof(EVENT_BATCH_RESULT_T);
rCmdBatchReq.ucSeqNum = 2;
rCmdBatchReq.ucCmd = SCAN_BATCH_REQ_RESULT;
rCmdBatchReq.ucMScan = prEventBatchResult->ucScanCount; /* Get which round result */
rStatus = wlanSendSetQueryCmd(prAdapter,
CMD_ID_SET_BATCH_REQ,
FALSE,
TRUE,
TRUE,
nicCmdEventBatchScanResult,
nicOidCmdTimeoutCommon,
sizeof(CMD_BATCH_REQ_T),
(PUINT_8) &rCmdBatchReq, (PVOID) pvQueryBuffer, u4QueryBufferLen);
return rStatus;
}
/*----------------------------------------------------------------------------*/
/*!
* \brief
*
* \param[in] prAdapter Pointer to the Adapter structure
* \param[in] pvSetBuffer A pointer to the buffer that holds the data to be set
* \param[in] u4SetBufferLen The length of the set buffer
* \param[out] pu4SetInfoLen If the call is successful, returns the number of
* bytes read from the set buffer. If the call failed due to invalid length of
* the set buffer, returns the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_INVALID_DATA If new setting value is wrong.
* \retval WLAN_STATUS_INVALID_LENGTH
*
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidSetBatchScanReq(IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
return batchSetCmd(prAdapter, pvSetBuffer, u4SetBufferLen, pu4SetInfoLen);
}
/*----------------------------------------------------------------------------*/
/*!
* \brief
*
* \param[in] pvAdapter Pointer to the Adapter structure.
* \param[out] pvQueryBuffer A pointer to the buffer that holds the result of
* the query.
* \param[in] u4QueryBufferLen The length of the query buffer.
* \param[out] pu4QueryInfoLen If the call is successful, returns the number of
* bytes written into the query buffer. If the call
* failed due to invalid length of the query buffer,
* returns the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_INVALID_LENGTH
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidQueryBatchScanResult(IN P_ADAPTER_T prAdapter,
OUT PVOID pvQueryBuffer, IN UINT_32 u4QueryBufferLen, OUT PUINT_32 pu4QueryInfoLen)
{
return batchGetCmd(prAdapter, pvQueryBuffer, u4QueryBufferLen, pu4QueryInfoLen);
} /* end of wlanoidQueryBatchScanResult() */
#endif /* CFG_SUPPORT_BATCH_SCAN */
#if CFG_SUPPORT_PASSPOINT
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called by HS2.0 to set the assoc info, which is needed to add to
* Association request frame while join HS2.0 AP.
*
* \param[in] prAdapter Pointer to the Adapter structure
* \param[in] pvSetBuffer A pointer to the buffer that holds the data to be set
* \param[in] u4SetBufferLen The length of the set buffer
* \param[out] pu4SetInfoLen If the call is successful, returns the number of
* bytes read from the set buffer. If the call failed due to invalid length of
* the set buffer, returns the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_INVALID_DATA If new setting value is wrong.
* \retval WLAN_STATUS_INVALID_LENGTH
*
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidSetHS20Info(IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
P_IE_HS20_INDICATION_T prHS20IndicationIe;
ASSERT(prAdapter);
ASSERT(pvSetBuffer);
ASSERT(pu4SetInfoLen);
DEBUGFUNC("wlanoidSetHS20AssocInfo");
DBGLOG(REQ, LOUD, "\r\n");
if (u4SetBufferLen == 0)
return WLAN_STATUS_INVALID_LENGTH;
*pu4SetInfoLen = u4SetBufferLen;
prHS20IndicationIe = (P_IE_HS20_INDICATION_T) pvSetBuffer;
prAdapter->prGlueInfo->ucHotspotConfig = prHS20IndicationIe->ucHotspotConfig;
prAdapter->prGlueInfo->fgConnectHS20AP = TRUE;
DBGLOG(SEC, TRACE, "HS20 IE sz %ld\n", u4SetBufferLen);
kalMemCopy(prAdapter->prGlueInfo->aucHS20AssocInfoIE, pvSetBuffer, u4SetBufferLen);
prAdapter->prGlueInfo->u2HS20AssocInfoIELen = (UINT_16) u4SetBufferLen;
DBGLOG(SEC, TRACE, "HS20 Assoc Info IE sz %ld\n", u4SetBufferLen);
return WLAN_STATUS_SUCCESS;
}
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called by WSC to set the assoc info, which is needed to add to
* Association request frame while join WPS AP.
*
* \param[in] prAdapter Pointer to the Adapter structure
* \param[in] pvSetBuffer A pointer to the buffer that holds the data to be set
* \param[in] u4SetBufferLen The length of the set buffer
* \param[out] pu4SetInfoLen If the call is successful, returns the number of
* bytes read from the set buffer. If the call failed due to invalid length of
* the set buffer, returns the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_INVALID_DATA If new setting value is wrong.
* \retval WLAN_STATUS_INVALID_LENGTH
*
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidSetInterworkingInfo(IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
#if 0
P_HS20_INFO_T prHS20Info = NULL;
P_IE_INTERWORKING_T prInterWorkingIe;
ASSERT(prAdapter);
ASSERT(pvSetBuffer);
ASSERT(pu4SetInfoLen);
prHS20Info = &(prAdapter->rWifiVar.rHS20Info);
DEBUGFUNC("wlanoidSetInterworkingInfo");
DBGLOG(REQ, TRACE, "\r\n");
if (u4SetBufferLen == 0)
return WLAN_STATUS_INVALID_LENGTH;
*pu4SetInfoLen = u4SetBufferLen;
prInterWorkingIe = (P_IE_INTERWORKING_T) pvSetBuffer;
prHS20Info->ucAccessNetworkOptions = prInterWorkingIe->ucAccNetOpt;
prHS20Info->ucVenueGroup = prInterWorkingIe->ucVenueGroup;
prHS20Info->ucVenueType = prInterWorkingIe->ucVenueType;
COPY_MAC_ADDR(prHS20Info->aucHESSID, prInterWorkingIe->aucHESSID);
DBGLOG(SEC, TRACE, "IW IE sz %ld\n", u4SetBufferLen);
#endif
return WLAN_STATUS_SUCCESS;
}
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called by WSC to set the Roaming Consortium IE info, which is needed to
* add to Association request frame while join WPS AP.
*
* \param[in] prAdapter Pointer to the Adapter structure
* \param[in] pvSetBuffer A pointer to the buffer that holds the data to be set
* \param[in] u4SetBufferLen The length of the set buffer
* \param[out] pu4SetInfoLen If the call is successful, returns the number of
* bytes read from the set buffer. If the call failed due to invalid length of
* the set buffer, returns the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_INVALID_DATA If new setting value is wrong.
* \retval WLAN_STATUS_INVALID_LENGTH
*
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidSetRoamingConsortiumIEInfo(IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
#if 0
P_HS20_INFO_T prHS20Info = NULL;
P_PARAM_HS20_ROAMING_CONSORTIUM_INFO prRCInfo;
ASSERT(prAdapter);
ASSERT(pvSetBuffer);
ASSERT(pu4SetInfoLen);
prHS20Info = &(prAdapter->rWifiVar.rHS20Info);
/* DEBUGFUNC("wlanoidSetRoamingConsortiumInfo"); */
/* DBGLOG(HS2, TRACE, ("\r\n")); */
if (u4SetBufferLen == 0)
return WLAN_STATUS_INVALID_LENGTH;
*pu4SetInfoLen = u4SetBufferLen;
prRCInfo = (P_PARAM_HS20_ROAMING_CONSORTIUM_INFO) pvSetBuffer;
kalMemCopy(&(prHS20Info->rRCInfo), prRCInfo, sizeof(PARAM_HS20_ROAMING_CONSORTIUM_INFO));
/* DBGLOG(HS2, TRACE, ("RoamingConsortium IE sz %ld\n", u4SetBufferLen)); */
#endif
return WLAN_STATUS_SUCCESS;
}
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to set_bssid_pool
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[in] pvSetBuffer Pointer to the buffer that holds the data to be set.
* \param[in] u4SetBufferLen The length of the set buffer.
* \param[out] pu4SetInfoLen If the call is successful, returns the number of
* bytes read from the set buffer. If the call failed
* due to invalid length of the set buffer, returns
* the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_INVALID_LENGTH
* \retval WLAN_STATUS_ADAPTER_NOT_READY
* \retval WLAN_STATUS_MULTICAST_FULL
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidSetHS20BssidPool(IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
WLAN_STATUS rWlanStatus = WLAN_STATUS_SUCCESS;
ASSERT(prAdapter);
ASSERT(pu4SetInfoLen);
if (u4SetBufferLen)
ASSERT(pvSetBuffer);
if (u4SetBufferLen < sizeof(PARAM_HS20_SET_BSSID_POOL)) {
*pu4SetInfoLen = sizeof(PARAM_HS20_SET_BSSID_POOL);
return WLAN_STATUS_BUFFER_TOO_SHORT;
}
rWlanStatus = hs20SetBssidPool(prAdapter, pvSetBuffer, KAL_NETWORK_TYPE_AIS_INDEX);
return rWlanStatus;
} /* end of wlanoidSendHS20GASRequest() */
#endif /* CFG_SUPPORT_PASSPOINT */
#if CFG_SUPPORT_SNIFFER
WLAN_STATUS
wlanoidSetMonitor(IN P_ADAPTER_T prAdapter, IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
P_PARAM_CUSTOM_MONITOR_SET_STRUCT_T prMonitorSetInfo;
CMD_MONITOR_SET_INFO_T rCmdMonitorSetInfo;
WLAN_STATUS rWlanStatus = WLAN_STATUS_SUCCESS;
DEBUGFUNC("wlanoidSetMonitor");
ASSERT(prAdapter);
ASSERT(pu4SetInfoLen);
*pu4SetInfoLen = sizeof(PARAM_CUSTOM_MONITOR_SET_STRUCT_T);
if (u4SetBufferLen < sizeof(PARAM_CUSTOM_MONITOR_SET_STRUCT_T))
return WLAN_STATUS_INVALID_LENGTH;
ASSERT(pvSetBuffer);
prMonitorSetInfo = (P_PARAM_CUSTOM_MONITOR_SET_STRUCT_T) pvSetBuffer;
rCmdMonitorSetInfo.ucEnable = prMonitorSetInfo->ucEnable;
rCmdMonitorSetInfo.ucBand = prMonitorSetInfo->ucBand;
rCmdMonitorSetInfo.ucPriChannel = prMonitorSetInfo->ucPriChannel;
rCmdMonitorSetInfo.ucSco = prMonitorSetInfo->ucSco;
rCmdMonitorSetInfo.ucChannelWidth = prMonitorSetInfo->ucChannelWidth;
rCmdMonitorSetInfo.ucChannelS1 = prMonitorSetInfo->ucChannelS1;
rCmdMonitorSetInfo.ucChannelS2 = prMonitorSetInfo->ucChannelS2;
rWlanStatus = wlanSendSetQueryCmd(prAdapter,
CMD_ID_SET_MONITOR,
TRUE,
FALSE,
TRUE,
nicCmdEventSetCommon,
nicOidCmdTimeoutCommon,
sizeof(CMD_MONITOR_SET_INFO_T),
(PUINT_8) &rCmdMonitorSetInfo, pvSetBuffer, u4SetBufferLen);
return rWlanStatus;
}
#endif
#if CFG_SUPPORT_ADVANCE_CONTROL
WLAN_STATUS
wlanoidAdvCtrl(IN P_ADAPTER_T prAdapter,
OUT PVOID pvQueryBuffer, IN UINT_32 u4QueryBufferLen, OUT PUINT_32 pu4QueryInfoLen)
{
P_CMD_ADV_CONFIG_HEADER_T cmd;
UINT_16 type = 0;
UINT_32 len;
BOOLEAN fgSetQuery = FALSE;
BOOLEAN fgNeedResp = TRUE;
DBGLOG(REQ, LOUD, "%s>\n", __func__);
ASSERT(prAdapter);
if (u4QueryBufferLen)
ASSERT(pvQueryBuffer);
ASSERT(pu4QueryInfoLen);
if (prAdapter->rAcpiState == ACPI_STATE_D3) {
DBGLOG(REQ, WARN,
"Fail in query receive error! (Adapter not ready). ACPI=D%d, Radio=%d\n",
prAdapter->rAcpiState, prAdapter->fgIsRadioOff);
*pu4QueryInfoLen = sizeof(UINT_32);
return WLAN_STATUS_ADAPTER_NOT_READY;
} else if (u4QueryBufferLen < sizeof(*cmd)) {
DBGLOG(REQ, WARN, "Too short length %ld\n", u4QueryBufferLen);
return WLAN_STATUS_INVALID_LENGTH;
}
cmd = (P_CMD_ADV_CONFIG_HEADER_T)pvQueryBuffer;
if (cmd->u2Type & CMD_ADV_CONTROL_SET) {
fgSetQuery = TRUE;
fgNeedResp = FALSE;
}
type = cmd->u2Type;
type &= ~CMD_ADV_CONTROL_SET;
DBGLOG(RSN, INFO, "%s cmd type %d\n", __func__, cmd->u2Type);
switch (type) {
case CMD_PTA_CONFIG_TYPE:
*pu4QueryInfoLen = sizeof(CMD_PTA_CONFIG_T);
len = sizeof(CMD_PTA_CONFIG_T);
break;
case CMD_GET_REPORT_TYPE:
*pu4QueryInfoLen = sizeof(struct CMD_GET_TRAFFIC_REPORT);
len = sizeof(struct CMD_GET_TRAFFIC_REPORT);
break;
case CMD_NOISE_HISTOGRAM_TYPE:
*pu4QueryInfoLen = sizeof(struct CMD_NOISE_HISTOGRAM_REPORT);
len = sizeof(struct CMD_NOISE_HISTOGRAM_REPORT);
break;
default:
return WLAN_STATUS_INVALID_LENGTH;
}
return wlanSendSetQueryCmd(prAdapter,
CMD_ID_ADV_CONTROL,
fgSetQuery,
fgNeedResp,
TRUE,
nicCmdEventQueryAdvCtrl,
nicOidCmdTimeoutCommon,
len, (PUINT_8)cmd,
pvQueryBuffer, u4QueryBufferLen);
}
#endif
#if CFG_SUPPORT_MSP
WLAN_STATUS
wlanoidQueryWlanInfo(IN P_ADAPTER_T prAdapter,
IN PVOID pvQueryBuffer, IN UINT_32 u4QueryBufferLen, OUT PUINT_32 pu4QueryInfoLen)
{
P_PARAM_HW_WLAN_INFO_T prHwWlanInfo;
DEBUGFUNC("wlanoidQueryWlanInfo");
DBGLOG(REQ, LOUD, "\n");
ASSERT(prAdapter);
if (u4QueryBufferLen)
ASSERT(pvQueryBuffer);
ASSERT(pu4QueryInfoLen);
*pu4QueryInfoLen = sizeof(PARAM_HW_WLAN_INFO_T);
if (prAdapter->rAcpiState == ACPI_STATE_D3) {
DBGLOG(REQ, WARN,
"Fail in query receive error! (Adapter not ready). ACPI=D%d, Radio=%d\n",
prAdapter->rAcpiState, prAdapter->fgIsRadioOff);
*pu4QueryInfoLen = sizeof(UINT_32);
return WLAN_STATUS_ADAPTER_NOT_READY;
} else if (u4QueryBufferLen < sizeof(PARAM_HW_WLAN_INFO_T)) {
DBGLOG(REQ, WARN, "Too short length %ld\n", u4QueryBufferLen);
return WLAN_STATUS_INVALID_LENGTH;
}
prHwWlanInfo = (P_PARAM_HW_WLAN_INFO_T)pvQueryBuffer;
DBGLOG(RSN, INFO, "MT6632 : wlanoidQueryWlanInfo index = %d\n", prHwWlanInfo->u4Index);
/* *pu4QueryInfoLen = 8 + prRxStatistics->u4TotalNum; */
return wlanSendSetQueryCmd(prAdapter,
CMD_ID_WLAN_INFO,
FALSE,
TRUE,
TRUE,
nicCmdEventQueryWlanInfo,
nicOidCmdTimeoutCommon,
sizeof(PARAM_HW_WLAN_INFO_T), (PUINT_8)prHwWlanInfo,
pvQueryBuffer, u4QueryBufferLen);
} /* wlanoidQueryWlanInfo */
WLAN_STATUS
wlanoidQueryMibInfo(IN P_ADAPTER_T prAdapter,
IN PVOID pvQueryBuffer, IN UINT_32 u4QueryBufferLen, OUT PUINT_32 pu4QueryInfoLen)
{
P_PARAM_HW_MIB_INFO_T prHwMibInfo;
DEBUGFUNC("wlanoidQueryMibInfo");
DBGLOG(REQ, LOUD, "\n");
ASSERT(prAdapter);
if (u4QueryBufferLen)
ASSERT(pvQueryBuffer);
ASSERT(pu4QueryInfoLen);
*pu4QueryInfoLen = sizeof(PARAM_HW_MIB_INFO_T);
if (prAdapter->rAcpiState == ACPI_STATE_D3) {
DBGLOG(REQ, WARN,
"Fail in query receive error! (Adapter not ready). ACPI=D%d, Radio=%d\n",
prAdapter->rAcpiState, prAdapter->fgIsRadioOff);
*pu4QueryInfoLen = sizeof(UINT_32);
return WLAN_STATUS_ADAPTER_NOT_READY;
} else if (u4QueryBufferLen < sizeof(PARAM_HW_MIB_INFO_T)) {
DBGLOG(REQ, WARN, "Too short length %ld\n", u4QueryBufferLen);
return WLAN_STATUS_INVALID_LENGTH;
}
prHwMibInfo = (P_PARAM_HW_MIB_INFO_T)pvQueryBuffer;
DBGLOG(RSN, INFO, "MT6632 : wlanoidQueryMibInfo index = %d\n", prHwMibInfo->u4Index);
/* *pu4QueryInfoLen = 8 + prRxStatistics->u4TotalNum; */
return wlanSendSetQueryCmd(prAdapter,
CMD_ID_MIB_INFO,
FALSE,
TRUE,
TRUE,
nicCmdEventQueryMibInfo,
nicOidCmdTimeoutCommon,
sizeof(PARAM_HW_MIB_INFO_T), (PUINT_8)prHwMibInfo,
pvQueryBuffer, u4QueryBufferLen);
} /* wlanoidQueryMibInfo */
#endif
#if CFG_SUPPORT_LAST_SEC_MCS_INFO
WLAN_STATUS
wlanoidTxMcsInfo(IN P_ADAPTER_T prAdapter,
IN PVOID pvQueryBuffer, IN UINT_32 u4QueryBufferLen, OUT PUINT_32 pu4QueryInfoLen)
{
struct PARAM_TX_MCS_INFO *prMcsInfo;
DEBUGFUNC("wlanoidQueryWlanInfo");
DBGLOG(REQ, LOUD, "\n");
ASSERT(prAdapter);
if (u4QueryBufferLen)
ASSERT(pvQueryBuffer);
ASSERT(pu4QueryInfoLen);
*pu4QueryInfoLen = sizeof(struct PARAM_TX_MCS_INFO);
if (prAdapter->rAcpiState == ACPI_STATE_D3) {
DBGLOG(REQ, WARN,
"Fail in query receive error! (Adapter not ready). ACPI=D%d, Radio=%d\n",
prAdapter->rAcpiState, prAdapter->fgIsRadioOff);
*pu4QueryInfoLen = sizeof(UINT_32);
return WLAN_STATUS_ADAPTER_NOT_READY;
} else if (u4QueryBufferLen < sizeof(struct PARAM_TX_MCS_INFO)) {
DBGLOG(REQ, WARN, "Too short length %ld\n", u4QueryBufferLen);
return WLAN_STATUS_INVALID_LENGTH;
}
prMcsInfo = (struct PARAM_TX_MCS_INFO *)pvQueryBuffer;
return wlanSendSetQueryCmd(prAdapter,
CMD_ID_TX_MCS_INFO,
FALSE,
TRUE,
TRUE,
nicCmdEventTxMcsInfo,
nicOidCmdTimeoutCommon,
sizeof(struct PARAM_TX_MCS_INFO), (PUINT_8)prMcsInfo,
pvQueryBuffer, u4QueryBufferLen);
}
#endif
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to set FW log to Host.
*
* \param[in] prAdapter Pointer to the Adapter structure.
* \param[in] pvSetBuffer Pointer to the buffer that holds the data to be set.
* \param[in] u4SetBufferLen The length of the set buffer.
* \param[out] pu4SetInfoLen If the call is successful, returns the number of
* bytes read from the set buffer. If the call failed
* due to invalid length of the set buffer, returns
* the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_INVALID_LENGTH
* \retval WLAN_STATUS_NOT_SUPPORTED
* \retval WLAN_STATUS_ADAPTER_NOT_READY
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidSetFwLog2Host(
IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer,
IN UINT_32 u4SetBufferLen,
OUT PUINT_32 pu4SetInfoLen)
{
P_CMD_FW_LOG_2_HOST_CTRL_T prFwLog2HostCtrl;
UINT_64 ts = KAL_GET_HOST_CLOCK();
DEBUGFUNC("wlanoidSetFwLog2Host");
ASSERT(prAdapter);
ASSERT(pu4SetInfoLen);
*pu4SetInfoLen = sizeof(CMD_FW_LOG_2_HOST_CTRL_T);
if (u4SetBufferLen)
ASSERT(pvSetBuffer);
if (prAdapter->rAcpiState == ACPI_STATE_D3) {
DBGLOG(REQ, WARN,
"Fail in set FW log to Host! (Adapter not ready). ACPI=D%d, Radio=%d\n",
prAdapter->rAcpiState, prAdapter->fgIsRadioOff);
return WLAN_STATUS_ADAPTER_NOT_READY;
} else if (u4SetBufferLen < sizeof(CMD_FW_LOG_2_HOST_CTRL_T)) {
DBGLOG(REQ, WARN, "Too short length %ld\n", u4SetBufferLen);
return WLAN_STATUS_INVALID_LENGTH;
}
prFwLog2HostCtrl = (P_CMD_FW_LOG_2_HOST_CTRL_T)pvSetBuffer;
prFwLog2HostCtrl->u4HostTimeMSec = (UINT_32)(do_div(ts, 1000000000) / 1000);
prFwLog2HostCtrl->u4HostTimeSec = (UINT_32)ts;
#if CFG_SUPPORT_FW_DBG_LEVEL_CTRL
DBGLOG(REQ, INFO, "McuDest %d, LogType %d, (FwLogLevel %d)\n", prFwLog2HostCtrl->ucMcuDest,
prFwLog2HostCtrl->ucFwLog2HostCtrl, prFwLog2HostCtrl->ucFwLogLevel);
#else
DBGLOG(REQ, INFO, "McuDest %d, LogType %d\n", prFwLog2HostCtrl->ucMcuDest,
prFwLog2HostCtrl->ucFwLog2HostCtrl);
#endif
return wlanSendSetQueryCmd(prAdapter,
CMD_ID_FW_LOG_2_HOST,
TRUE,
FALSE,
TRUE,
nicCmdEventSetCommon,
nicOidCmdTimeoutCommon,
sizeof(CMD_FW_LOG_2_HOST_CTRL_T),
(PUINT_8)prFwLog2HostCtrl, pvSetBuffer, u4SetBufferLen);
}
WLAN_STATUS
wlanoidNotifyFwSuspend(
IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer,
IN UINT_32 u4SetBufferLen,
OUT PUINT_32 pu4SetInfoLen)
{
P_CMD_SUSPEND_MODE_SETTING_T prSuspendCmd;
if (!prAdapter || !pvSetBuffer)
return WLAN_STATUS_INVALID_DATA;
prSuspendCmd = (P_CMD_SUSPEND_MODE_SETTING_T)pvSetBuffer;
return wlanSendSetQueryCmd(prAdapter,
CMD_ID_SET_SUSPEND_MODE,
TRUE,
FALSE,
TRUE,
nicCmdEventSetCommon,
nicOidCmdTimeoutCommon,
sizeof(CMD_SUSPEND_MODE_SETTING_T),
(PUINT_8)prSuspendCmd,
NULL,
0);
}
#if CFG_SUPPORT_DBDC
WLAN_STATUS
wlanoidSetDbdcEnable(
IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer,
IN UINT_32 u4SetBufferLen,
OUT PUINT_32 pu4SetInfoLen)
{
UINT_8 ucDBDCEnable;
if (!prAdapter || !pvSetBuffer)
return WLAN_STATUS_INVALID_DATA;
kalMemCopy(&ucDBDCEnable, pvSetBuffer, 1);
cnmUpdateDbdcSetting(prAdapter, ucDBDCEnable);
return WLAN_STATUS_SUCCESS;
}
#endif /*#if CFG_SUPPORT_DBDC*/
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to set tx target power base.
*
* \param[in] pvAdapter Pointer to the Adapter structure.
* \param[out] pvQueryBuf A pointer to the buffer that holds the result of
* the query.
* \param[in] u4QueryBufLen The length of the query buffer.
* \param[out] pu4QueryInfoLen If the call is successful, returns the number of
* bytes written into the query buffer. If the call
* failed due to invalid length of the query buffer,
* returns the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_INVALID_LENGTH
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidQuerySetTxTargetPower(IN P_ADAPTER_T prAdapter, IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen,
OUT PUINT_32 pu4SetInfoLen)
{
P_PARAM_CUSTOM_SET_TX_TARGET_POWER_T prSetTxTargetPowerInfo;
CMD_SET_TX_TARGET_POWER_T rCmdSetTxTargetPower;
WLAN_STATUS rWlanStatus = WLAN_STATUS_SUCCESS;
DEBUGFUNC("wlanoidQuerySetTxTargetPower");
ASSERT(prAdapter);
ASSERT(pu4SetInfoLen);
*pu4SetInfoLen = sizeof(P_PARAM_CUSTOM_SET_TX_TARGET_POWER_T);
if (u4SetBufferLen < sizeof(P_PARAM_CUSTOM_SET_TX_TARGET_POWER_T))
return WLAN_STATUS_INVALID_LENGTH;
ASSERT(pvSetBuffer);
prSetTxTargetPowerInfo = (P_PARAM_CUSTOM_SET_TX_TARGET_POWER_T) pvSetBuffer;
kalMemSet(&rCmdSetTxTargetPower, 0, sizeof(CMD_SET_TX_TARGET_POWER_T));
rCmdSetTxTargetPower.ucTxTargetPwr = prSetTxTargetPowerInfo->ucTxTargetPwr;
DBGLOG(INIT, INFO, "MT6632 : wlanoidQuerySetTxTargetPower =%x dbm\n", rCmdSetTxTargetPower.ucTxTargetPwr);
rWlanStatus = wlanSendSetQueryCmd(prAdapter,
CMD_ID_SET_TX_PWR,
TRUE, /* fgSetQuery Bit: True->write False->read*/
FALSE, /* fgNeedResp */
TRUE, /* fgIsOid*/
nicCmdEventSetCommon, /* REF: wlanoidSetDbdcEnable */
nicOidCmdTimeoutCommon,
sizeof(CMD_ACCESS_EFUSE_T),
(PUINT_8) (&rCmdSetTxTargetPower), pvSetBuffer, u4SetBufferLen);
return rWlanStatus;
}
#if (CFG_SUPPORT_DFS_MASTER == 1)
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to set rdd report.
*
* \param[in] pvAdapter Pointer to the Adapter structure.
* \param[out] pvQueryBuf A pointer to the buffer that holds the result of
* the query.
* \param[in] u4QueryBufLen The length of the query buffer.
* \param[out] pu4QueryInfoLen If the call is successful, returns the number of
* bytes written into the query buffer. If the call
* failed due to invalid length of the query buffer,
* returns the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_INVALID_LENGTH
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidQuerySetRddReport(IN P_ADAPTER_T prAdapter, IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen,
OUT PUINT_32 pu4SetInfoLen)
{
P_PARAM_CUSTOM_SET_RDD_REPORT_T prSetRddReport;
P_CMD_RDD_ON_OFF_CTRL_T prCmdRddOnOffCtrl;
WLAN_STATUS rWlanStatus = WLAN_STATUS_SUCCESS;
DEBUGFUNC("wlanoidQuerySetRddReport");
ASSERT(prAdapter);
ASSERT(pu4SetInfoLen);
*pu4SetInfoLen = sizeof(P_PARAM_CUSTOM_SET_RDD_REPORT_T);
ASSERT(pvSetBuffer);
prSetRddReport = (P_PARAM_CUSTOM_SET_RDD_REPORT_T) pvSetBuffer;
prCmdRddOnOffCtrl = (P_CMD_RDD_ON_OFF_CTRL_T) cnmMemAlloc(prAdapter, RAM_TYPE_MSG,
sizeof(*prCmdRddOnOffCtrl));
ASSERT(prCmdRddOnOffCtrl);
if (prCmdRddOnOffCtrl == NULL) {
DBGLOG(INIT, ERROR, "prCmdRddOnOffCtrl is NULL");
return WLAN_STATUS_FAILURE;
}
prCmdRddOnOffCtrl->ucDfsCtrl = RDD_RADAR_EMULATE;
prCmdRddOnOffCtrl->ucRddIdx = prSetRddReport->ucDbdcIdx;
if (prCmdRddOnOffCtrl->ucRddIdx)
prCmdRddOnOffCtrl->ucRddInSel = RDD_IN_SEL_1;
else
prCmdRddOnOffCtrl->ucRddInSel = RDD_IN_SEL_0;
DBGLOG(INIT, INFO, "MT6632 : wlanoidQuerySetRddReport - DFS ctrl: %.d, RDD index: %d\n",
prCmdRddOnOffCtrl->ucDfsCtrl, prCmdRddOnOffCtrl->ucRddIdx);
rWlanStatus = wlanSendSetQueryCmd(prAdapter,
CMD_ID_RDD_ON_OFF_CTRL,
TRUE, /* fgSetQuery Bit: True->write False->read*/
FALSE, /* fgNeedResp */
TRUE, /* fgIsOid*/
nicCmdEventSetCommon, /* REF: wlanoidSetDbdcEnable */
nicOidCmdTimeoutCommon,
sizeof(*prCmdRddOnOffCtrl),
(PUINT_8) (prCmdRddOnOffCtrl), pvSetBuffer, u4SetBufferLen);
cnmMemFree(prAdapter, prCmdRddOnOffCtrl);
return rWlanStatus;
}
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is called to set rdd report.
*
* \param[in] pvAdapter Pointer to the Adapter structure.
* \param[out] pvQueryBuf A pointer to the buffer that holds the result of
* the query.
* \param[in] u4QueryBufLen The length of the query buffer.
* \param[out] pu4QueryInfoLen If the call is successful, returns the number of
* bytes written into the query buffer. If the call
* failed due to invalid length of the query buffer,
* returns the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_INVALID_LENGTH
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidQuerySetRadarDetectMode(IN P_ADAPTER_T prAdapter, IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen,
OUT PUINT_32 pu4SetInfoLen)
{
struct PARAM_CUSTOM_SET_RADAR_DETECT_MODE *prSetRadarDetectMode;
P_CMD_RDD_ON_OFF_CTRL_T prCmdRddOnOffCtrl;
WLAN_STATUS rWlanStatus = WLAN_STATUS_SUCCESS;
DEBUGFUNC("wlanoidQuerySetRadarDetectMode");
ASSERT(prAdapter);
ASSERT(pu4SetInfoLen);
*pu4SetInfoLen = sizeof(struct PARAM_CUSTOM_SET_RADAR_DETECT_MODE *);
ASSERT(pvSetBuffer);
prSetRadarDetectMode = (struct PARAM_CUSTOM_SET_RADAR_DETECT_MODE *) pvSetBuffer;
prCmdRddOnOffCtrl = (P_CMD_RDD_ON_OFF_CTRL_T) cnmMemAlloc(prAdapter, RAM_TYPE_MSG,
sizeof(*prCmdRddOnOffCtrl));
ASSERT(prCmdRddOnOffCtrl);
if (prCmdRddOnOffCtrl == NULL) {
DBGLOG(INIT, ERROR, "prCmdRddOnOffCtrl is NULL");
return WLAN_STATUS_FAILURE;
}
prCmdRddOnOffCtrl->ucDfsCtrl = RDD_DET_MODE;
prCmdRddOnOffCtrl->ucRadarDetectMode = prSetRadarDetectMode->ucRadarDetectMode;
DBGLOG(INIT, INFO, "MT6632 : wlanoidQuerySetRadarDetectMode - DFS ctrl: %.d, Radar Detect Mode: %d\n",
prCmdRddOnOffCtrl->ucDfsCtrl, prCmdRddOnOffCtrl->ucRadarDetectMode);
rWlanStatus = wlanSendSetQueryCmd(prAdapter,
CMD_ID_RDD_ON_OFF_CTRL,
TRUE, /* fgSetQuery Bit: True->write False->read*/
FALSE, /* fgNeedResp */
TRUE, /* fgIsOid*/
nicCmdEventSetCommon, /* REF: wlanoidSetDbdcEnable */
nicOidCmdTimeoutCommon,
sizeof(*prCmdRddOnOffCtrl),
(PUINT_8) (prCmdRddOnOffCtrl), pvSetBuffer, u4SetBufferLen);
cnmMemFree(prAdapter, prCmdRddOnOffCtrl);
return rWlanStatus;
}
#endif
/*----------------------------------------------------------------------------*/
/*!
* \brief This routine is used to turn radio off.
*
* \param[in] pvAdapter Pointer to the Adapter structure.
* \param[in] pvSetBuffer A pointer to the buffer that holds the data to be set.
* \param[in] u4SetBufferLen The length of the set buffer.
* \param[out] pu4SetInfoLen If the call is successful, returns the number of
* bytes read from the set buffer. If the call failed
* due to invalid length of the set buffer, returns
* the amount of storage needed.
*
* \retval WLAN_STATUS_SUCCESS
* \retval WLAN_STATUS_ADAPTER_NOT_READY
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS
wlanoidLinkDown(IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer, IN UINT_32 u4SetBufferLen, OUT PUINT_32 pu4SetInfoLen)
{
DEBUGFUNC("wlanoidSetDisassociate");
ASSERT(prAdapter);
ASSERT(pu4SetInfoLen);
*pu4SetInfoLen = 0;
if (prAdapter->rAcpiState == ACPI_STATE_D3) {
DBGLOG(REQ, WARN,
"Fail in set link down! (Adapter not ready). ACPI=D%d, Radio=%d\n",
prAdapter->rAcpiState, prAdapter->fgIsRadioOff);
return WLAN_STATUS_ADAPTER_NOT_READY;
}
aisBssLinkDown(prAdapter);
return WLAN_STATUS_SUCCESS;
} /* wlanoidSetDisassociate */
WLAN_STATUS
wlanoidSetCSIControl(
IN P_ADAPTER_T prAdapter,
IN PVOID pvSetBuffer,
IN UINT_32 u4SetBufferLen,
OUT PUINT_32 pu4SetInfoLen)
{
struct CMD_CSI_CONTROL_T *pCSICtrl;
DEBUGFUNC("wlanoidSetCSIControl");
*pu4SetInfoLen = sizeof(struct CMD_CSI_CONTROL_T);
if (prAdapter->rAcpiState == ACPI_STATE_D3) {
DBGLOG(REQ, WARN,
"Fail in set CSI control! (Adapter not ready). ACPI=D%d, Radio=%d\n",
prAdapter->rAcpiState, prAdapter->fgIsRadioOff);
return WLAN_STATUS_ADAPTER_NOT_READY;
} else if (u4SetBufferLen < sizeof(struct CMD_CSI_CONTROL_T)) {
DBGLOG(REQ, WARN, "Too short length %lu\n", u4SetBufferLen);
return WLAN_STATUS_INVALID_LENGTH;
}
pCSICtrl = (struct CMD_CSI_CONTROL_T *)pvSetBuffer;
return wlanSendSetQueryCmd(prAdapter,
CMD_ID_CSI_CONTROL,
TRUE,
FALSE,
TRUE,
nicCmdEventSetCommon,
nicOidCmdTimeoutCommon,
sizeof(struct CMD_CSI_CONTROL_T),
(PUINT_8)pCSICtrl, pvSetBuffer, u4SetBufferLen);
}
WLAN_STATUS
wlanoidGetTxPwrTbl(IN P_ADAPTER_T prAdapter,
IN PVOID pvQueryBuffer,
IN UINT_32 u4QueryBufferLen,
OUT PUINT_32 pu4QueryInfoLen)
{
struct CMD_GET_TXPWR_TBL CmdPwrTbl;
struct PARAM_CMD_GET_TXPWR_TBL *prPwrTbl = NULL;
DEBUGFUNC("wlanoidGetTxPwrTbl");
DBGLOG(REQ, LOUD, "\n");
if (!prAdapter || (!pvQueryBuffer && u4QueryBufferLen) ||
!pu4QueryInfoLen)
return WLAN_STATUS_INVALID_DATA;
*pu4QueryInfoLen = sizeof(struct PARAM_CMD_GET_TXPWR_TBL);
if (prAdapter->rAcpiState == ACPI_STATE_D3) {
DBGLOG(REQ, WARN,
"Fail in query receive error! (Adapter not ready). ACPI=D%d, Radio=%d\n",
prAdapter->rAcpiState, prAdapter->fgIsRadioOff);
*pu4QueryInfoLen = sizeof(UINT_32);
return WLAN_STATUS_ADAPTER_NOT_READY;
} else if (u4QueryBufferLen < sizeof(struct PARAM_CMD_GET_TXPWR_TBL)) {
DBGLOG(REQ, WARN, "Too short length %ld\n", u4QueryBufferLen);
return WLAN_STATUS_INVALID_LENGTH;
}
prPwrTbl = (struct PARAM_CMD_GET_TXPWR_TBL *)pvQueryBuffer;
CmdPwrTbl.ucDbdcIdx = prPwrTbl->ucDbdcIdx;
return wlanSendSetQueryCmd(prAdapter,
CMD_ID_GET_TXPWR_TBL,
FALSE,
TRUE,
TRUE,
nicCmdEventGetTxPwrTbl,
nicOidCmdTimeoutCommon,
sizeof(struct CMD_GET_TXPWR_TBL),
(PUINT_8)&CmdPwrTbl,
pvQueryBuffer,
u4QueryBufferLen);
}