Google Git
Sign in
coral / mt7668-wifi-mod / 1d6dba90ad1c2bab944a9bc76e62f38363d4b0f2 / . / os / linux / hif / usb / usb.c
blob: 9cdf4255aa4b917703cc66ed88944971b4cd31ca [file] [log] [blame]
/******************************************************************************
*
* This file is provided under a dual license. When you use or
* distribute this software, you may choose to be licensed under
* version 2 of the GNU General Public License ("GPLv2 License")
* or BSD License.
*
* GPLv2 License
*
* Copyright(C) 2016 MediaTek Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
* See http://www.gnu.org/licenses/gpl-2.0.html for more details.
*
* BSD LICENSE
*
* Copyright(C) 2016 MediaTek Inc. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*****************************************************************************/
/******************************************************************************
*[File] usb.c
*[Version] v1.0
*[Revision Date] 2010-03-01
*[Author]
*[Description]
* The program provides USB HIF driver
*[Copyright]
* Copyright (C) 2010 MediaTek Incorporation. All Rights Reserved.
******************************************************************************/
/*******************************************************************************
* C O M P I L E R F L A G S
********************************************************************************
*/
/*******************************************************************************
* E X T E R N A L R E F E R E N C E S
********************************************************************************
*/
#include "precomp.h"
#include <linux/usb.h>
#include <linux/mutex.h>
#include <linux/mm.h>
#ifndef CONFIG_X86
#include <asm/memory.h>
#endif
#include "mt66xx_reg.h"
#include "cust_usb_id.h"
/*******************************************************************************
* C O N S T A N T S
********************************************************************************
*/
#define HIF_USB_ERR_TITLE_STR "["CHIP_NAME"] USB Access Error!"
#define HIF_USB_ERR_DESC_STR "**USB Access Error**\n"
#define HIF_USB_ACCESS_RETRY_LIMIT 1
#define MT_MAC_BASE 0x2
#define MTK_USB_PORT_MASK 0x0F
#define MTK_USB_BULK_IN_MIN_EP 4
#define MTK_USB_BULK_IN_MAX_EP 5
#define MTK_USB_BULK_OUT_MIN_EP 4
#define MTK_USB_BULK_OUT_MAX_EP 9
static const struct usb_device_id mtk_usb_ids[] = {
/* {USB_DEVICE(0x0E8D,0x6632), .driver_info = MT_MAC_BASE}, */
{ USB_DEVICE_AND_INTERFACE_INFO(0x0E8D, 0x6632, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t)&mt66xx_driver_data_mt6632},
{ USB_DEVICE_AND_INTERFACE_INFO(0x0E8D, 0x7666, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t)&mt66xx_driver_data_mt6632},
{ USB_DEVICE_AND_INTERFACE_INFO(0x0E8D, 0x7668, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t)&mt66xx_driver_data_mt7668},
/* If customer usb id is presented, add to the table. */
CUST_USB_ID_TABLES
{ /* end: all zeroes */ },
};
MODULE_DEVICE_TABLE(usb, mtk_usb_ids);
#if CFG_USB_TX_AGG
/* TODO */
const UINT_32 USB_TX_DATA_BUF_SIZE[TC_NUM] = { NIC_TX_PAGE_COUNT_TC0 / (USB_REQ_TX_DATA_CNT - 1),
NIC_TX_PAGE_COUNT_TC1 / (USB_REQ_TX_DATA_CNT - 1),
NIC_TX_PAGE_COUNT_TC2 / (USB_REQ_TX_DATA_CNT - 1),
NIC_TX_PAGE_COUNT_TC3 / (USB_REQ_TX_DATA_CNT - 1),
NIC_TX_PAGE_COUNT_TC4 / (USB_REQ_TX_DATA_CNT - 1),
NIC_TX_PAGE_COUNT_TC5 / (USB_REQ_TX_DATA_CNT - 1),
};
#endif
/*******************************************************************************
* D A T A T Y P E S
********************************************************************************
*/
/*******************************************************************************
* P U B L I C D A T A
********************************************************************************
*/
/*******************************************************************************
* P R I V A T E D A T A
********************************************************************************
*/
static probe_card pfWlanProbe;
static remove_card pfWlanRemove;
static BOOLEAN g_fgDriverProbed = FALSE;
static struct usb_driver mtk_usb_driver = {
.name = "wlan", /* "MTK USB WLAN Driver" */
.id_table = mtk_usb_ids,
.probe = NULL,
.disconnect = NULL,
.suspend = NULL,
.resume = NULL,
.reset_resume = NULL,
.supports_autosuspend = 0,
};
/*******************************************************************************
* M A C R O S
********************************************************************************
*/
/*******************************************************************************
* F U N C T I O N D E C L A R A T I O N S
********************************************************************************
*/
static int mtk_usb_probe(struct usb_interface *intf, const struct usb_device_id *id);
static void mtk_usb_disconnect(struct usb_interface *intf);
static int mtk_usb_suspend(struct usb_interface *intf, pm_message_t message);
static int mtk_usb_resume(struct usb_interface *intf);
static int mtk_usb_reset_resume(struct usb_interface *intf);
static int mtk_usb_bulk_in_msg(IN P_GL_HIF_INFO_T prHifInfo, IN UINT_32 len, OUT UCHAR * buffer, int InEp);
static int mtk_usb_intr_in_msg(IN P_GL_HIF_INFO_T prHifInfo, IN UINT_32 len, OUT UCHAR * buffer, int InEp);
static int mtk_usb_bulk_out_msg(IN P_GL_HIF_INFO_T prHifInfo, IN UINT_32 len, IN UCHAR * buffer, int OutEp);
/*******************************************************************************
* F U N C T I O N S
********************************************************************************
*/
/*----------------------------------------------------------------------------*/
/*!
* \brief This function is a USB probe function
*
* \param[in] intf USB interface
* \param[in] id USB device id
*
* \return void
*/
/*----------------------------------------------------------------------------*/
static int mtk_usb_probe(struct usb_interface *intf, const struct usb_device_id *id)
{
int ret = 0;
struct usb_device *dev;
DBGLOG(HAL, EVENT, "mtk_usb_probe()\n");
ASSERT(intf);
ASSERT(id);
dev = interface_to_usbdev(intf);
dev = usb_get_dev(dev);
/* Prevent un-expected usb operation */
if (g_fgDriverProbed) {
DBGLOG(HAL, ERROR, "wlan_probe(): Device already probed!!\n");
return -EBUSY;
}
DBGLOG(HAL, EVENT, "wlan_probe()\n");
if (pfWlanProbe((PVOID) intf, (PVOID) id->driver_info) != WLAN_STATUS_SUCCESS) {
/* printk(KERN_WARNING DRV_NAME"pfWlanProbe fail!call pfWlanRemove()\n"); */
pfWlanRemove();
DBGLOG(HAL, ERROR, "wlan_probe() failed\n");
ret = -1;
} else {
g_fgDriverProbed = TRUE;
}
return ret;
}
/*----------------------------------------------------------------------------*/
/*!
* \brief This function is a USB remove function
*
* \param[in] intf USB interface
*
* \return void
*/
/*----------------------------------------------------------------------------*/
static void mtk_usb_disconnect(struct usb_interface *intf)
{
P_GLUE_INFO_T prGlueInfo;
DBGLOG(HAL, STATE, "mtk_usb_disconnect()\n");
ASSERT(intf);
prGlueInfo = (P_GLUE_INFO_T)usb_get_intfdata(intf);
if (prGlueInfo)
glUsbSetState(&prGlueInfo->rHifInfo, USB_STATE_LINK_DOWN);
else
DBGLOG(HAL, ERROR, "prGlueInfo is NULL!!\n");
if (g_fgDriverProbed)
pfWlanRemove();
usb_set_intfdata(intf, NULL);
usb_put_dev(interface_to_usbdev(intf));
g_fgDriverProbed = FALSE;
DBGLOG(HAL, STATE, "mtk_usb_disconnect() done\n");
}
static int mtk_usb_suspend(struct usb_interface *intf, pm_message_t message)
{
P_GLUE_INFO_T prGlueInfo = (P_GLUE_INFO_T)usb_get_intfdata(intf);
UINT_8 count = 0;
UINT_8 ret = 0;
DBGLOG(HAL, STATE, "mtk_usb_suspend()\n");
wlanSuspendPmHandle(prGlueInfo);
halUSBPreSuspendCmd(prGlueInfo->prAdapter);
while (prGlueInfo->rHifInfo.state != USB_STATE_PRE_SUSPEND_DONE) {
if (count > 25) {
DBGLOG(HAL, ERROR, "pre_suspend timeout, return -EFAULT in the end\n");
ret = -EFAULT;
break;
}
msleep(20);
count++;
}
glUsbSetState(&prGlueInfo->rHifInfo, USB_STATE_SUSPEND);
halDisableInterrupt(prGlueInfo->prAdapter);
halTxCancelAllSending(prGlueInfo->prAdapter);
DBGLOG(HAL, STATE, "mtk_usb_suspend() done!\n");
if (ret && PMSG_IS_AUTO(message))
mtk_usb_resume(intf);
return ret;
}
static int mtk_usb_resume(struct usb_interface *intf)
{
int ret = 0;
P_GLUE_INFO_T prGlueInfo = (P_GLUE_INFO_T)usb_get_intfdata(intf);
DBGLOG(HAL, STATE, "mtk_usb_resume()\n");
if (!prGlueInfo) {
DBGLOG(HAL, ERROR, "prGlueInfo is NULL!\n");
return -EFAULT;
}
/* NOTE: USB bus may not really do suspend and resume*/
ret = usb_control_msg(prGlueInfo->rHifInfo.udev,
usb_sndctrlpipe(prGlueInfo->rHifInfo.udev, 0), VND_REQ_FEATURE_SET,
DEVICE_VENDOR_REQUEST_OUT, FEATURE_SET_WVALUE_RESUME, 0, NULL, 0,
VENDOR_TIMEOUT_MS);
if (ret)
DBGLOG(HAL, ERROR, "VendorRequest FeatureSetResume ERROR: %x\n", (unsigned int)ret);
glUsbSetState(&prGlueInfo->rHifInfo, USB_STATE_PRE_RESUME);
/* To trigger CR4 path */
wlanSendDummyCmd(prGlueInfo->prAdapter, FALSE);
glUsbSetState(&prGlueInfo->rHifInfo, USB_STATE_LINK_UP);
halEnableInterrupt(prGlueInfo->prAdapter);
wlanResumePmHandle(prGlueInfo);
DBGLOG(HAL, STATE, "mtk_usb_resume() done!\n");
/* TODO */
return 0;
}
static int mtk_usb_reset_resume(struct usb_interface *intf)
{
DBGLOG(HAL, STATE, "mtk_usb_reset_resume()\n");
mtk_usb_resume(intf);
DBGLOG(HAL, STATE, "mtk_usb_reset_resume done!()\n");
/* TODO */
return 0;
}
/*----------------------------------------------------------------------------*/
/*!
* \brief USB EP0 vendor request
*
* \param[in] prGlueInfo Pointer to the GLUE_INFO_T structure.
* \param[in] uEndpointAddress
* \param[in] RequestType
* \param[in] Request
* \param[in] Value
* \param[in] Index
* \param[in] TransferBuffer
* \param[in] TransferBufferLength
*
* \retval 0 if success
* non-zero if fail, the return value of usb_control_msg()
*/
/*----------------------------------------------------------------------------*/
int mtk_usb_vendor_request(IN P_GLUE_INFO_T prGlueInfo, IN UCHAR uEndpointAddress, IN UCHAR RequestType,
IN UCHAR Request, IN UINT_16 Value, IN UINT_16 Index, IN PVOID TransferBuffer,
IN UINT_32 TransferBufferLength)
{
P_GL_HIF_INFO_T prHifInfo = &prGlueInfo->rHifInfo;
void *xfer_buf;
/* refer to RTUSB_VendorRequest */
int ret = 0;
/* TODO: semaphore */
if (in_interrupt()) {
DBGLOG(REQ, ERROR, "BUG: mtk_usb_vendor_request is called from invalid context\n");
return -EFAULT;
}
if (unlikely(TransferBufferLength > prHifInfo->vendor_req_buf_sz)) {
DBGLOG(REQ, ERROR, "len %u exceeds limit %zu\n", TransferBufferLength,
prHifInfo->vendor_req_buf_sz);
return -E2BIG;
}
if (unlikely(TransferBuffer && !prHifInfo->vendor_req_buf)) {
DBGLOG(REQ, ERROR, "NULL vendor_req_buf\n");
return -EFAULT;
}
/* use heap instead of old stack memory */
xfer_buf = (TransferBuffer) ? prHifInfo->vendor_req_buf : NULL;
mutex_lock(&prHifInfo->vendor_req_sem);
if (RequestType == DEVICE_VENDOR_REQUEST_OUT) {
if (xfer_buf)
memcpy(xfer_buf, TransferBuffer, TransferBufferLength);
ret = usb_control_msg(prHifInfo->udev,
usb_sndctrlpipe(prHifInfo->udev, uEndpointAddress),
Request, RequestType, Value, Index,
xfer_buf, TransferBufferLength,
VENDOR_TIMEOUT_MS);
} else if (RequestType == DEVICE_VENDOR_REQUEST_IN) {
ret = usb_control_msg(prHifInfo->udev,
usb_rcvctrlpipe(prHifInfo->udev, uEndpointAddress),
Request, RequestType, Value, Index,
xfer_buf, TransferBufferLength,
VENDOR_TIMEOUT_MS);
if (xfer_buf && (ret > 0))
memcpy(TransferBuffer, xfer_buf, TransferBufferLength);
}
mutex_unlock(&prHifInfo->vendor_req_sem);
return (ret == TransferBufferLength) ? 0 : ret;
}
/*----------------------------------------------------------------------------*/
/*!
* \brief USB Bulk IN msg
*
* \param[in] prHifInfo Pointer to the GL_HIF_INFO_T structure
* \param[in] len
* \param[in] buffer
* \param[in] InEp
*
* \retval
*/
/*----------------------------------------------------------------------------*/
static int mtk_usb_bulk_in_msg(IN P_GL_HIF_INFO_T prHifInfo, IN UINT_32 len, OUT UCHAR *buffer, int InEp)
{
int ret = 0;
UINT_32 count;
if (in_interrupt()) {
DBGLOG(REQ, ERROR, "BUG: mtk_usb_bulk_in_msg is called from invalid context\n");
return FALSE;
}
mutex_lock(&prHifInfo->vendor_req_sem);
/* do a blocking bulk read to get data from the device */
ret = usb_bulk_msg(prHifInfo->udev,
usb_rcvbulkpipe(prHifInfo->udev, InEp), buffer, len, &count, BULK_TIMEOUT_MS);
mutex_unlock(&prHifInfo->vendor_req_sem);
if (ret >= 0) {
#if 0 /* maximize buff len for usb in */
if (count != len) {
DBGLOG(HAL, WARN, "usb_bulk_msg(IN=%d) Warning. Data is not completed. (receive %d/%u)\n",
InEp, count, len);
}
#endif
return count;
}
DBGLOG(HAL, ERROR, "usb_bulk_msg(IN=%d) Fail. Error code = %d.\n", InEp, ret);
return ret;
}
static int mtk_usb_intr_in_msg(IN P_GL_HIF_INFO_T prHifInfo, IN UINT_32 len, OUT UCHAR *buffer, int InEp)
{
int ret = 0;
UINT_32 count;
if (in_interrupt()) {
DBGLOG(REQ, ERROR, "BUG: mtk_usb_intr_in_msg is called from invalid context\n");
return FALSE;
}
mutex_lock(&prHifInfo->vendor_req_sem);
/* do a blocking interrupt read to get data from the device */
ret = usb_interrupt_msg(prHifInfo->udev,
usb_rcvintpipe(prHifInfo->udev, InEp), buffer, len, &count, INTERRUPT_TIMEOUT_MS);
mutex_unlock(&prHifInfo->vendor_req_sem);
if (ret >= 0) {
#if 0 /* maximize buff len for usb in */
if (count != len) {
DBGLOG(HAL, WARN, "usb_interrupt_msg(IN=%d) Warning. Data is not completed. (receive %d/%u)\n",
InEp, count, len);
}
#endif
return count;
}
DBGLOG(HAL, ERROR, "usb_interrupt_msg(IN=%d) Fail. Error code = %d.\n", InEp, ret);
return ret;
}
/*----------------------------------------------------------------------------*/
/*!
* \brief USB Bulk OUT msg
*
* \param[in] prHifInfo Pointer to the GL_HIF_INFO_T structure
* \param[in] len
* \param[in] buffer
* \param[in] OutEp
*
* \retval
*/
/*----------------------------------------------------------------------------*/
static int mtk_usb_bulk_out_msg(IN P_GL_HIF_INFO_T prHifInfo, IN UINT_32 len, IN UCHAR *buffer, int OutEp)
{
int ret = 0;
UINT_32 count;
if (in_interrupt()) {
DBGLOG(REQ, ERROR, "BUG: mtk_usb_bulk_out_msg is called from invalid context\n");
return FALSE;
}
mutex_lock(&prHifInfo->vendor_req_sem);
/* do a blocking bulk read to get data from the device */
ret = usb_bulk_msg(prHifInfo->udev,
usb_sndbulkpipe(prHifInfo->udev, OutEp), buffer, len, &count, BULK_TIMEOUT_MS);
mutex_unlock(&prHifInfo->vendor_req_sem);
if (ret >= 0) {
#if 0
if (count != len) {
DBGLOG(HAL, ERROR, "usb_bulk_msg(OUT=%d) Warning. Data is not completed. (send %d/%u)\n", OutEp,
count, len);
}
#endif
return count;
}
DBGLOG(HAL, ERROR, "usb_bulk_msg(OUT=%d) Fail. Error code = %d.\n", OutEp, ret);
return ret;
}
/*----------------------------------------------------------------------------*/
/*!
* \brief This function will register USB bus to the os
*
* \param[in] pfProbe Function pointer to detect card
* \param[in] pfRemove Function pointer to remove card
*
* \return The result of registering USB bus
*/
/*----------------------------------------------------------------------------*/
WLAN_STATUS glRegisterBus(probe_card pfProbe, remove_card pfRemove)
{
int ret = 0;
ASSERT(pfProbe);
ASSERT(pfRemove);
pfWlanProbe = pfProbe;
pfWlanRemove = pfRemove;
mtk_usb_driver.probe = mtk_usb_probe;
mtk_usb_driver.disconnect = mtk_usb_disconnect;
mtk_usb_driver.suspend = mtk_usb_suspend;
mtk_usb_driver.resume = mtk_usb_resume;
mtk_usb_driver.reset_resume = mtk_usb_reset_resume;
mtk_usb_driver.supports_autosuspend = 1;
ret = (usb_register(&mtk_usb_driver) == 0) ? WLAN_STATUS_SUCCESS : WLAN_STATUS_FAILURE;
return ret;
} /* end of glRegisterBus() */
/*----------------------------------------------------------------------------*/
/*!
* \brief This function will unregister USB bus to the os
*
* \param[in] pfRemove Function pointer to remove card
*
* \return (none)
*/
/*----------------------------------------------------------------------------*/
VOID glUnregisterBus(remove_card pfRemove)
{
if (g_fgDriverProbed) {
pfRemove();
g_fgDriverProbed = FALSE;
}
usb_deregister(&mtk_usb_driver);
} /* end of glUnregisterBus() */
VOID glUdmaTxRxEnable(P_GLUE_INFO_T prGlueInfo, BOOLEAN enable)
{
UINT_32 u4Value = 0;
kalDevRegRead(prGlueInfo, UDMA_WLCFG_0, &u4Value);
/* enable UDMA TX & RX */
if (enable)
u4Value |= UDMA_WLCFG_0_TX_EN(1) | UDMA_WLCFG_0_RX_EN(1) | UDMA_WLCFG_0_RX_MPSZ_PAD0(1);
else
u4Value &= ~(UDMA_WLCFG_0_TX_EN(1) | UDMA_WLCFG_0_RX_EN(1));
kalDevRegWrite(prGlueInfo, UDMA_WLCFG_0, u4Value);
}
VOID glUdmaRxAggEnable(P_GLUE_INFO_T prGlueInfo, BOOLEAN enable)
{
UINT_32 u4Value = 0;
if (enable) {
kalDevRegRead(prGlueInfo, UDMA_WLCFG_0, &u4Value);
/* enable UDMA TX & RX */
u4Value &= ~(UDMA_WLCFG_0_RX_AGG_EN_MASK |
UDMA_WLCFG_0_RX_AGG_LMT_MASK |
UDMA_WLCFG_0_RX_AGG_TO_MASK);
u4Value |= UDMA_WLCFG_0_RX_AGG_EN(1) |
UDMA_WLCFG_0_RX_AGG_LMT(USB_RX_AGGREGTAION_LIMIT) |
UDMA_WLCFG_0_RX_AGG_TO(USB_RX_AGGREGTAION_TIMEOUT);
kalDevRegWrite(prGlueInfo, UDMA_WLCFG_0, u4Value);
kalDevRegRead(prGlueInfo, UDMA_WLCFG_1, &u4Value);
u4Value &= ~UDMA_WLCFG_1_RX_AGG_PKT_LMT_MASK;
u4Value |= UDMA_WLCFG_1_RX_AGG_PKT_LMT(USB_RX_AGGREGTAION_PKT_LIMIT);
kalDevRegWrite(prGlueInfo, UDMA_WLCFG_1, u4Value);
} else {
kalDevRegRead(prGlueInfo, UDMA_WLCFG_0, &u4Value);
u4Value &= ~UDMA_WLCFG_0_RX_AGG_EN(1);
kalDevRegWrite(prGlueInfo, UDMA_WLCFG_0, u4Value);
}
}
PVOID glUsbInitQ(P_GL_HIF_INFO_T prHifInfo, struct list_head *prHead, UINT_32 u4Cnt)
{
UINT_32 i;
P_USB_REQ_T prUsbReqs, prUsbReq;
INIT_LIST_HEAD(prHead);
prUsbReqs = kcalloc(u4Cnt, sizeof(struct _USB_REQ_T), GFP_ATOMIC);
if (!prUsbReqs) {
DBGLOG(HAL, ERROR, "kcalloc fail!\n");
return NULL;
}
prUsbReq = prUsbReqs;
for (i = 0; i < u4Cnt; ++i) {
prUsbReq->prHifInfo = prHifInfo;
prUsbReq->prUrb = usb_alloc_urb(0, GFP_ATOMIC);
if (prUsbReq->prUrb == NULL)
DBGLOG(HAL, ERROR, "usb_alloc_urb() reports error\n");
prUsbReq->prBufCtrl = NULL;
INIT_LIST_HEAD(&prUsbReq->list);
list_add_tail(&prUsbReq->list, prHead);
prUsbReq++;
}
return (PVOID) prUsbReqs;
}
void glUsbUnInitQ(struct list_head *prHead)
{
P_USB_REQ_T prUsbReq, prUsbReqNext;
list_for_each_entry_safe(prUsbReq, prUsbReqNext, prHead, list) {
usb_free_urb(prUsbReq->prUrb);
list_del_init(&prUsbReq->list);
}
}
VOID glUsbEnqueueReq(P_GL_HIF_INFO_T prHifInfo, struct list_head *prHead, P_USB_REQ_T prUsbReq, spinlock_t *prLock,
BOOLEAN fgHead)
{
unsigned long flags;
spin_lock_irqsave(prLock, flags);
if (fgHead)
list_add(&prUsbReq->list, prHead);
else
list_add_tail(&prUsbReq->list, prHead);
spin_unlock_irqrestore(prLock, flags);
}
P_USB_REQ_T glUsbDequeueReq(P_GL_HIF_INFO_T prHifInfo, struct list_head *prHead, spinlock_t *prLock)
{
P_USB_REQ_T prUsbReq;
unsigned long flags;
spin_lock_irqsave(prLock, flags);
if (list_empty(prHead)) {
spin_unlock_irqrestore(prLock, flags);
return NULL;
}
prUsbReq = list_entry(prHead->next, struct _USB_REQ_T, list);
list_del_init(prHead->next);
spin_unlock_irqrestore(prLock, flags);
return prUsbReq;
}
/*----------------------------------------------------------------------------*/
/*!
* \brief This function borrow UsbReq from Tx data FFA queue to the spcified TC Tx data free queue
*
* \param[in] prHifInfo Pointer to the GL_HIF_INFO_T structure
* \param[in] ucTc Specify TC index
*
* \retval TRUE operation success
* \retval FALSE operation fail
*/
/*----------------------------------------------------------------------------*/
BOOLEAN glUsbBorrowFfaReq(P_GL_HIF_INFO_T prHifInfo, UINT_8 ucTc)
{
P_USB_REQ_T prUsbReq;
if (list_empty(&prHifInfo->rTxDataFfaQ))
return FALSE;
prUsbReq = list_entry(prHifInfo->rTxDataFfaQ.next, struct _USB_REQ_T, list);
list_del_init(prHifInfo->rTxDataFfaQ.next);
*((PUINT_8)&prUsbReq->prPriv) = FFA_MASK | ucTc;
list_add_tail(&prUsbReq->list, &prHifInfo->rTxDataFreeQ[ucTc]);
return TRUE;
}
/*----------------------------------------------------------------------------*/
/*!
* \brief This function set USB state
*
* \param[in] prHifInfo Pointer to the GL_HIF_INFO_T structure
* \param[in] state Specify TC index
*
* \retval TRUE operation success
* \retval FALSE operation fail
*/
/*----------------------------------------------------------------------------*/
VOID glUsbSetState(P_GL_HIF_INFO_T prHifInfo, enum usb_state state)
{
unsigned long flags;
spin_lock_irqsave(&prHifInfo->rStateLock, flags);
prHifInfo->state = state;
spin_unlock_irqrestore(&prHifInfo->rStateLock, flags);
}
/*----------------------------------------------------------------------------*/
/*!
* \brief This function is a wrapper of submit urb to ensure driver can transmit
* WiFi packet when WiFi path of device is allowed.
*
* \param[in] prHifInfo Pointer to the GL_HIF_INFO_T structure
* \param[in] type Specify submit type
*
* \retval 0 Successful submissions.
* \retval negative Error number.
*/
/*----------------------------------------------------------------------------*/
INT_32 glUsbSubmitUrb(P_GL_HIF_INFO_T prHifInfo, struct urb *urb, enum usb_submit_type type)
{
unsigned long flags;
int ret = 0;
if (type == SUBMIT_TYPE_RX_EVENT || type == SUBMIT_TYPE_RX_DATA)
return usb_submit_urb(urb, GFP_ATOMIC);
spin_lock_irqsave(&prHifInfo->rStateLock, flags);
if (type == SUBMIT_TYPE_TX_CMD) {
if (!(prHifInfo->state == USB_STATE_LINK_UP || prHifInfo->state == USB_STATE_PRE_RESUME)) {
spin_unlock_irqrestore(&prHifInfo->rStateLock, flags);
DBGLOG(HAL, INFO, "WiFi path is not allowed to transmit CMD packet. (%d)\n", prHifInfo->state);
return -ESHUTDOWN;
}
} else if (type == SUBMIT_TYPE_TX_DATA) {
if (prHifInfo->state != USB_STATE_LINK_UP) {
spin_unlock_irqrestore(&prHifInfo->rStateLock, flags);
DBGLOG(HAL, INFO, "WiFi path is not allowed to transmit DATA packet. (%d)\n", prHifInfo->state);
return -ESHUTDOWN;
}
}
ret = usb_submit_urb(urb, GFP_ATOMIC);
spin_unlock_irqrestore(&prHifInfo->rStateLock, flags);
return ret;
}
/*----------------------------------------------------------------------------*/
/*!
* \brief This function stores hif related info, which is initialized before.
*
* \param[in] prGlueInfo Pointer to glue info structure
* \param[in] u4Cookie Pointer to UINT_32 memory base variable for _HIF_HPI
*
* \return (none)
*/
/*----------------------------------------------------------------------------*/
VOID glSetHifInfo(P_GLUE_INFO_T prGlueInfo, ULONG ulCookie)
{
struct usb_host_interface *alts;
struct usb_host_endpoint *ep;
struct usb_endpoint_descriptor *ep_desc;
P_GL_HIF_INFO_T prHifInfo = &prGlueInfo->rHifInfo;
P_USB_REQ_T prUsbReq, prUsbReqNext;
UINT_32 i;
#if CFG_USB_TX_AGG
UINT_8 ucTc;
#endif
prHifInfo->eEventEpType = USB_EVENT_TYPE;
prHifInfo->fgEventEpDetected = FALSE;
prHifInfo->intf = (struct usb_interface *)ulCookie;
prHifInfo->udev = interface_to_usbdev(prHifInfo->intf);
alts = prHifInfo->intf->cur_altsetting;
DBGLOG(HAL, STATE, "USB Device speed: %x [%u]\n",
prHifInfo->udev->speed, alts->endpoint[0].desc.wMaxPacketSize);
if (prHifInfo->eEventEpType == EVENT_EP_TYPE_UNKONW) {
for (i = 0; i < alts->desc.bNumEndpoints; ++i) {
ep = &alts->endpoint[i];
if (ep->desc.bEndpointAddress == USB_EVENT_EP_IN) {
ep_desc = &alts->endpoint[i].desc;
switch (ep_desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
case USB_ENDPOINT_XFER_INT:
prHifInfo->eEventEpType = EVENT_EP_TYPE_INTR;
break;
case USB_ENDPOINT_XFER_BULK:
default:
prHifInfo->eEventEpType = EVENT_EP_TYPE_BULK;
break;
}
}
}
}
ASSERT(prHifInfo->eEventEpType != EVENT_EP_TYPE_UNKONW);
DBGLOG(HAL, INFO, "Event EP Type: %x\n", prHifInfo->eEventEpType);
prHifInfo->prGlueInfo = prGlueInfo;
usb_set_intfdata(prHifInfo->intf, prGlueInfo);
SET_NETDEV_DEV(prGlueInfo->prDevHandler, &prHifInfo->udev->dev);
spin_lock_init(&prHifInfo->rTxCmdQLock);
spin_lock_init(&prHifInfo->rTxDataQLock);
spin_lock_init(&prHifInfo->rRxEventQLock);
spin_lock_init(&prHifInfo->rRxDataQLock);
spin_lock_init(&prHifInfo->rStateLock);
mutex_init(&prHifInfo->vendor_req_sem);
prHifInfo->vendor_req_buf = kzalloc(VND_REQ_BUF_SIZE, GFP_KERNEL);
if (!prHifInfo->vendor_req_buf) {
DBGLOG(HAL, ERROR, "kzalloc vendor_req_buf %zu error\n",
VND_REQ_BUF_SIZE);
goto error;
}
prHifInfo->vendor_req_buf_sz = VND_REQ_BUF_SIZE;
#if CFG_USB_TX_AGG
for (ucTc = 0; ucTc < USB_TC_NUM; ++ucTc) {
prHifInfo->u4AggRsvSize[ucTc] = 0;
init_usb_anchor(&prHifInfo->rTxDataAnchor[ucTc]);
}
#else
init_usb_anchor(&prHifInfo->rTxDataAnchor);
#endif
init_usb_anchor(&prHifInfo->rRxDataAnchor);
init_usb_anchor(&prHifInfo->rRxEventAnchor);
/* TX CMD */
prHifInfo->prTxCmdReqHead = glUsbInitQ(prHifInfo, &prHifInfo->rTxCmdFreeQ, USB_REQ_TX_CMD_CNT);
prUsbReq = list_entry(prHifInfo->rTxCmdFreeQ.next, struct _USB_REQ_T, list);
i = 0;
list_for_each_entry_safe(prUsbReq, prUsbReqNext, &prHifInfo->rTxCmdFreeQ, list) {
prUsbReq->prBufCtrl = &prHifInfo->rTxCmdBufCtrl[i];
#if CFG_USB_CONSISTENT_DMA
prUsbReq->prBufCtrl->pucBuf = usb_alloc_coherent(prHifInfo->udev, USB_TX_CMD_BUF_SIZE, GFP_ATOMIC,
&prUsbReq->prUrb->transfer_dma);
#else
#ifdef CFG_PREALLOC_MEMORY
prUsbReq->prBufCtrl->pucBuf = preallocGetMem(MEM_ID_TX_CMD);
#else
prUsbReq->prBufCtrl->pucBuf = kmalloc(USB_TX_CMD_BUF_SIZE, GFP_ATOMIC);
#endif
#endif
if (prUsbReq->prBufCtrl->pucBuf == NULL) {
DBGLOG(HAL, ERROR, "kmalloc() reports error\n");
goto error;
}
prUsbReq->prBufCtrl->u4BufSize = USB_TX_CMD_BUF_SIZE;
++i;
}
glUsbInitQ(prHifInfo, &prHifInfo->rTxCmdSendingQ, 0);
/* TX Data FFA */
prHifInfo->arTxDataFfaReqHead = glUsbInitQ(prHifInfo,
&prHifInfo->rTxDataFfaQ, USB_REQ_TX_DATA_FFA_CNT);
i = 0;
list_for_each_entry_safe(prUsbReq, prUsbReqNext, &prHifInfo->rTxDataFfaQ, list) {
QUEUE_INITIALIZE(&prUsbReq->rSendingDataMsduInfoList);
*((PUINT_8)&prUsbReq->prPriv) = FFA_MASK;
prUsbReq->prBufCtrl = &prHifInfo->rTxDataFfaBufCtrl[i];
#if CFG_USB_CONSISTENT_DMA
prUsbReq->prBufCtrl->pucBuf =
usb_alloc_coherent(prHifInfo->udev, USB_TX_DATA_BUFF_SIZE, GFP_ATOMIC,
&prUsbReq->prUrb->transfer_dma);
#else
#ifdef CFG_PREALLOC_MEMORY
prUsbReq->prBufCtrl->pucBuf = preallocGetMem(MEM_ID_TX_DATA_FFA);
#else
prUsbReq->prBufCtrl->pucBuf = kmalloc(USB_TX_DATA_BUFF_SIZE, GFP_ATOMIC);
#endif
#endif
if (prUsbReq->prBufCtrl->pucBuf == NULL) {
DBGLOG(HAL, ERROR, "kmalloc() reports error\n");
goto error;
}
prUsbReq->prBufCtrl->u4BufSize = USB_TX_DATA_BUFF_SIZE;
prUsbReq->prBufCtrl->u4WrIdx = 0;
++i;
}
/* TX Data */
#if CFG_USB_TX_AGG
for (ucTc = 0; ucTc < USB_TC_NUM; ++ucTc) {
/* Only for TC0 ~ TC3 and DBDC1_TC */
if (ucTc >= TC4_INDEX && ucTc < USB_DBDC1_TC)
continue;
prHifInfo->arTxDataReqHead[ucTc] = glUsbInitQ(prHifInfo,
&prHifInfo->rTxDataFreeQ[ucTc], USB_REQ_TX_DATA_CNT);
i = 0;
list_for_each_entry_safe(prUsbReq, prUsbReqNext, &prHifInfo->rTxDataFreeQ[ucTc], list) {
QUEUE_INITIALIZE(&prUsbReq->rSendingDataMsduInfoList);
/* TODO: every endpoint should has an unique and only TC */
*((PUINT_8)&prUsbReq->prPriv) = ucTc;
prUsbReq->prBufCtrl = &prHifInfo->rTxDataBufCtrl[ucTc][i];
#if CFG_USB_CONSISTENT_DMA
prUsbReq->prBufCtrl->pucBuf =
usb_alloc_coherent(prHifInfo->udev, USB_TX_DATA_BUFF_SIZE, GFP_ATOMIC,
&prUsbReq->prUrb->transfer_dma);
#else
#ifdef CFG_PREALLOC_MEMORY
prUsbReq->prBufCtrl->pucBuf = preallocGetMem(MEM_ID_TX_DATA);
#else
prUsbReq->prBufCtrl->pucBuf = kmalloc(USB_TX_DATA_BUFF_SIZE, GFP_ATOMIC);
#endif
#endif
if (prUsbReq->prBufCtrl->pucBuf == NULL) {
DBGLOG(HAL, ERROR, "kmalloc() reports error\n");
goto error;
}
prUsbReq->prBufCtrl->u4BufSize = USB_TX_DATA_BUFF_SIZE;
prUsbReq->prBufCtrl->u4WrIdx = 0;
++i;
}
DBGLOG(INIT, INFO, "USB Tx URB INIT Tc[%u] cnt[%u] len[%u]\n", ucTc, i,
prHifInfo->rTxDataBufCtrl[ucTc][0].u4BufSize);
}
#else
glUsbInitQ(prHifInfo, &prHifInfo->rTxDataFreeQ, USB_REQ_TX_DATA_CNT);
prUsbReq = list_entry(prHifInfo->rTxDataFreeQ.next, struct _USB_REQ_T, list);
i = 0;
list_for_each_entry_safe(prUsbReq, prUsbReqNext, &prHifInfo->rTxDataFreeQ, list) {
QUEUE_INITIALIZE(&prUsbReq->rSendingDataMsduInfoList);
prUsbReq->prBufCtrl = &prHifInfo->rTxDataBufCtrl[i];
#if CFG_USB_CONSISTENT_DMA
prUsbReq->prBufCtrl->pucBuf =
usb_alloc_coherent(prHifInfo->udev, USB_TX_DATA_BUF_SIZE, GFP_ATOMIC,
&prUsbReq->prUrb->transfer_dma);
#else
#ifdef CFG_PREALLOC_MEMORY
prUsbReq->prBufCtrl->pucBuf = preallocGetMem(MEM_ID_TX_DATA);
#else
prUsbReq->prBufCtrl->pucBuf = kmalloc(USB_TX_DATA_BUF_SIZE, GFP_ATOMIC);
#endif
#endif
if (prUsbReq->prBufCtrl->pucBuf == NULL) {
DBGLOG(HAL, ERROR, "kmalloc() reports error\n");
goto error;
}
prUsbReq->prBufCtrl->u4BufSize = USB_TX_DATA_BUF_SIZE;
++i;
}
#endif
glUsbInitQ(prHifInfo, &prHifInfo->rTxCmdCompleteQ, 0);
glUsbInitQ(prHifInfo, &prHifInfo->rTxDataCompleteQ, 0);
/* RX EVENT */
prHifInfo->prRxEventReqHead = glUsbInitQ(prHifInfo, &prHifInfo->rRxEventFreeQ, USB_REQ_RX_EVENT_CNT);
i = 0;
list_for_each_entry_safe(prUsbReq, prUsbReqNext, &prHifInfo->rRxEventFreeQ, list) {
prUsbReq->prBufCtrl = &prHifInfo->rRxEventBufCtrl[i];
#ifdef CFG_PREALLOC_MEMORY
prUsbReq->prBufCtrl->pucBuf = preallocGetMem(MEM_ID_RX_EVENT);
#else
prUsbReq->prBufCtrl->pucBuf = kmalloc(USB_RX_EVENT_BUF_SIZE, GFP_ATOMIC);
#endif
if (prUsbReq->prBufCtrl->pucBuf == NULL) {
DBGLOG(HAL, ERROR, "kmalloc() reports error\n");
goto error;
}
prUsbReq->prBufCtrl->u4BufSize = USB_RX_EVENT_BUF_SIZE;
prUsbReq->prBufCtrl->u4ReadSize = 0;
++i;
}
/* RX Data */
prHifInfo->prRxDataReqHead = glUsbInitQ(prHifInfo, &prHifInfo->rRxDataFreeQ, USB_REQ_RX_DATA_CNT);
i = 0;
list_for_each_entry_safe(prUsbReq, prUsbReqNext, &prHifInfo->rRxDataFreeQ, list) {
prUsbReq->prBufCtrl = &prHifInfo->rRxDataBufCtrl[i];
#ifdef CFG_PREALLOC_MEMORY
prUsbReq->prBufCtrl->pucBuf = preallocGetMem(MEM_ID_RX_DATA);
#else
prUsbReq->prBufCtrl->pucBuf = kmalloc(USB_RX_DATA_BUF_SIZE, GFP_ATOMIC);
#endif
if (prUsbReq->prBufCtrl->pucBuf == NULL) {
DBGLOG(HAL, ERROR, "kmalloc() reports error\n");
goto error;
}
prUsbReq->prBufCtrl->u4BufSize = USB_RX_DATA_BUF_SIZE;
prUsbReq->prBufCtrl->u4ReadSize = 0;
++i;
}
glUsbInitQ(prHifInfo, &prHifInfo->rRxEventCompleteQ, 0);
glUsbInitQ(prHifInfo, &prHifInfo->rRxDataCompleteQ, 0);
glUsbSetState(prHifInfo, USB_STATE_LINK_UP);
return;
error:
/* TODO */
;
} /* end of glSetHifInfo() */
/*----------------------------------------------------------------------------*/
/*!
* \brief This function clears hif related info.
*
* \param[in] prGlueInfo Pointer to glue info structure
*
* \return (none)
*/
/*----------------------------------------------------------------------------*/
VOID glClearHifInfo(P_GLUE_INFO_T prGlueInfo)
{
/* P_GL_HIF_INFO_T prHifInfo = NULL; */
/* ASSERT(prGlueInfo); */
/* prHifInfo = &prGlueInfo->rHifInfo; */
#if CFG_USB_TX_AGG
UINT_8 ucTc;
#endif
P_USB_REQ_T prUsbReq, prUsbReqNext;
P_GL_HIF_INFO_T prHifInfo = &prGlueInfo->rHifInfo;
#if CFG_USB_TX_AGG
for (ucTc = 0; ucTc < USB_TC_NUM; ++ucTc) {
if (ucTc >= TC4_INDEX && ucTc < USB_DBDC1_TC)
continue;
list_for_each_entry_safe(prUsbReq, prUsbReqNext, &prHifInfo->rTxDataFreeQ[ucTc], list) {
#if CFG_USB_CONSISTENT_DMA
usb_free_coherent(prHifInfo->udev, USB_TX_DATA_BUFF_SIZE,
prUsbReq->prBufCtrl->pucBuf, prUsbReq->prUrb->transfer_dma);
#else
#ifndef CFG_PREALLOC_MEMORY
kfree(prUsbReq->prBufCtrl->pucBuf);
#endif
#endif
usb_free_urb(prUsbReq->prUrb);
}
}
#else
list_for_each_entry_safe(prUsbReq, prUsbReqNext, &prHifInfo->rTxDataFreeQ, list) {
#if CFG_USB_CONSISTENT_DMA
usb_free_coherent(prHifInfo->udev, USB_TX_DATA_BUFF_SIZE,
prUsbReq->prBufCtrl->pucBuf, prUsbReq->prUrb->transfer_dma);
#else
#ifndef CFG_PREALLOC_MEMORY
kfree(prUsbReq->prBufCtrl->pucBuf);
#endif
#endif
usb_free_urb(prUsbReq->prUrb);
}
#endif
list_for_each_entry_safe(prUsbReq, prUsbReqNext, &prHifInfo->rTxDataFfaQ, list) {
#if CFG_USB_CONSISTENT_DMA
usb_free_coherent(prHifInfo->udev, USB_TX_DATA_BUFF_SIZE,
prUsbReq->prBufCtrl->pucBuf, prUsbReq->prUrb->transfer_dma);
#else
#ifndef CFG_PREALLOC_MEMORY
kfree(prUsbReq->prBufCtrl->pucBuf);
#endif
#endif
usb_free_urb(prUsbReq->prUrb);
}
list_for_each_entry_safe(prUsbReq, prUsbReqNext, &prHifInfo->rTxCmdFreeQ, list) {
#if CFG_USB_CONSISTENT_DMA
usb_free_coherent(prHifInfo->udev, USB_TX_CMD_BUF_SIZE,
prUsbReq->prBufCtrl->pucBuf, prUsbReq->prUrb->transfer_dma);
#else
#ifndef CFG_PREALLOC_MEMORY
kfree(prUsbReq->prBufCtrl->pucBuf);
#endif
#endif
usb_free_urb(prUsbReq->prUrb);
}
list_for_each_entry_safe(prUsbReq, prUsbReqNext, &prHifInfo->rTxCmdCompleteQ, list) {
#if CFG_USB_CONSISTENT_DMA
usb_free_coherent(prHifInfo->udev, USB_TX_CMD_BUF_SIZE,
prUsbReq->prBufCtrl->pucBuf, prUsbReq->prUrb->transfer_dma);
#else
kfree(prUsbReq->prBufCtrl->pucBuf);
#endif
usb_free_urb(prUsbReq->prUrb);
}
list_for_each_entry_safe(prUsbReq, prUsbReqNext, &prHifInfo->rTxDataCompleteQ, list) {
#if CFG_USB_CONSISTENT_DMA
usb_free_coherent(prHifInfo->udev, USB_TX_CMD_BUF_SIZE,
prUsbReq->prBufCtrl->pucBuf, prUsbReq->prUrb->transfer_dma);
#else
kfree(prUsbReq->prBufCtrl->pucBuf);
#endif
usb_free_urb(prUsbReq->prUrb);
}
list_for_each_entry_safe(prUsbReq, prUsbReqNext, &prHifInfo->rRxDataFreeQ, list) {
#ifndef CFG_PREALLOC_MEMORY
kfree(prUsbReq->prBufCtrl->pucBuf);
#endif
usb_free_urb(prUsbReq->prUrb);
}
list_for_each_entry_safe(prUsbReq, prUsbReqNext, &prHifInfo->rRxEventFreeQ, list) {
#ifndef CFG_PREALLOC_MEMORY
kfree(prUsbReq->prBufCtrl->pucBuf);
#endif
usb_free_urb(prUsbReq->prUrb);
}
list_for_each_entry_safe(prUsbReq, prUsbReqNext, &prHifInfo->rRxDataCompleteQ, list) {
kfree(prUsbReq->prBufCtrl->pucBuf);
usb_free_urb(prUsbReq->prUrb);
}
list_for_each_entry_safe(prUsbReq, prUsbReqNext, &prHifInfo->rRxEventCompleteQ, list) {
kfree(prUsbReq->prBufCtrl->pucBuf);
usb_free_urb(prUsbReq->prUrb);
}
kfree(prHifInfo->prTxCmdReqHead);
kfree(prHifInfo->arTxDataFfaReqHead);
for (ucTc = 0; ucTc < USB_TC_NUM; ++ucTc)
kfree(prHifInfo->arTxDataReqHead[ucTc]);
kfree(prHifInfo->prRxEventReqHead);
kfree(prHifInfo->prRxDataReqHead);
mutex_destroy(&prHifInfo->vendor_req_sem);
kfree(prHifInfo->vendor_req_buf);
prHifInfo->vendor_req_buf = NULL;
prHifInfo->vendor_req_buf_sz = 0;
} /* end of glClearHifInfo() */
/*----------------------------------------------------------------------------*/
/*!
* \brief Initialize bus operation and hif related information, request resources.
*
* \param[out] pvData A pointer to HIF-specific data type buffer.
* For eHPI, pvData is a pointer to UINT_32 type and stores a
* mapped base address.
*
* \return (none)
*/
/*----------------------------------------------------------------------------*/
BOOL glBusInit(PVOID pvData)
{
return TRUE;
} /* end of glBusInit() */
/*----------------------------------------------------------------------------*/
/*!
* \brief Stop bus operation and release resources.
*
* \param[in] pvData A pointer to struct net_device.
*
* \return (none)
*/
/*----------------------------------------------------------------------------*/
VOID glBusRelease(PVOID pvData)
{
} /* end of glBusRelease() */
/*----------------------------------------------------------------------------*/
/*!
* \brief Setup bus interrupt operation and interrupt handler for os.
*
* \param[in] pvData A pointer to struct net_device.
* \param[in] pfnIsr A pointer to interrupt handler function.
* \param[in] pvCookie Private data for pfnIsr function.
*
* \retval WLAN_STATUS_SUCCESS if success
* NEGATIVE_VALUE if fail
*/
/*----------------------------------------------------------------------------*/
INT_32 glBusSetIrq(PVOID pvData, PVOID pfnIsr, PVOID pvCookie)
{
int ret = 0;
struct net_device *prNetDevice = NULL;
P_GLUE_INFO_T prGlueInfo = NULL;
P_GL_HIF_INFO_T prHifInfo = NULL;
ASSERT(pvData);
if (!pvData)
return -1;
prNetDevice = (struct net_device *)pvData;
prGlueInfo = (P_GLUE_INFO_T) pvCookie;
ASSERT(prGlueInfo);
if (!prGlueInfo)
return -1;
prHifInfo = &prGlueInfo->rHifInfo;
return ret;
} /* end of glBusSetIrq() */
/*----------------------------------------------------------------------------*/
/*!
* \brief Stop bus interrupt operation and disable interrupt handling for os.
*
* \param[in] pvData A pointer to struct net_device.
* \param[in] pvCookie Private data for pfnIsr function.
*
* \return (none)
*/
/*----------------------------------------------------------------------------*/
VOID glBusFreeIrq(PVOID pvData, PVOID pvCookie)
{
struct net_device *prNetDevice = NULL;
P_GLUE_INFO_T prGlueInfo = NULL;
P_GL_HIF_INFO_T prHifInfo = NULL;
ASSERT(pvData);
if (!pvData) {
/* printk(KERN_INFO DRV_NAME"%s null pvData\n", __FUNCTION__); */
return;
}
prNetDevice = (struct net_device *)pvData;
prGlueInfo = (P_GLUE_INFO_T) pvCookie;
ASSERT(prGlueInfo);
if (!prGlueInfo) {
/* printk(KERN_INFO DRV_NAME"%s no glue info\n", __FUNCTION__); */
return;
}
prHifInfo = &prGlueInfo->rHifInfo;
} /* end of glBusreeIrq() */
BOOLEAN glIsReadClearReg(UINT_32 u4Address)
{
switch (u4Address) {
case MCR_WHISR:
case MCR_WASR:
case MCR_D2HRM0R:
case MCR_D2HRM1R:
case MCR_WTQCR0:
case MCR_WTQCR1:
case MCR_WTQCR2:
case MCR_WTQCR3:
case MCR_WTQCR4:
case MCR_WTQCR5:
case MCR_WTQCR6:
case MCR_WTQCR7:
return TRUE;
default:
return FALSE;
}
}
UINT_16 glGetUsbDeviceVendorId(struct usb_device *dev)
{
return dev->descriptor.idVendor;
} /* end of glGetUsbDeviceVendorId() */
UINT_16 glGetUsbDeviceProductId(struct usb_device *dev)
{
return dev->descriptor.idProduct;
} /* end of glGetUsbDeviceProductId() */
INT_32 glGetUsbDeviceManufacturerName(struct usb_device *dev, UCHAR *buffer, UINT_32 bufLen)
{
return usb_string(dev, dev->descriptor.iManufacturer, buffer, bufLen);
} /* end of glGetUsbDeviceManufacturerName() */
INT_32 glGetUsbDeviceProductName(struct usb_device *dev, UCHAR *buffer, UINT_32 bufLen)
{
return usb_string(dev, dev->descriptor.iProduct, buffer, bufLen);
} /* end of glGetUsbDeviceManufacturerName() */
INT_32 glGetUsbDeviceSerialNumber(struct usb_device *dev, UCHAR *buffer, UINT_32 bufLen)
{
return usb_string(dev, dev->descriptor.iSerialNumber, buffer, bufLen);
} /* end of glGetUsbDeviceSerialNumber() */
/*----------------------------------------------------------------------------*/
/*!
* \brief Read a 32-bit device register
*
* \param[in] prGlueInfo Pointer to the GLUE_INFO_T structure.
* \param[in] u4Register Register offset
* \param[in] pu4Value Pointer to variable used to store read value
*
* \retval TRUE operation success
* \retval FALSE operation fail
*/
/*----------------------------------------------------------------------------*/
BOOL kalDevRegRead(IN P_GLUE_INFO_T prGlueInfo, IN UINT_32 u4Register, OUT PUINT_32 pu4Value)
{
int ret = 0;
UINT_8 ucRetryCount = 0;
ASSERT(prGlueInfo);
ASSERT(pu4Value);
*pu4Value = 0xFFFFFFFF;
do {
ret = mtk_usb_vendor_request(prGlueInfo, 0, DEVICE_VENDOR_REQUEST_IN, VND_REQ_REG_READ,
(u4Register & 0xffff0000) >> 16, (u4Register & 0x0000ffff), pu4Value,
sizeof(*pu4Value));
if (ret || ucRetryCount)
DBGLOG(HAL, ERROR, "usb_control_msg() status: %d retry: %u\n",
ret, ucRetryCount);
ucRetryCount++;
if (ucRetryCount > HIF_USB_ACCESS_RETRY_LIMIT)
break;
} while (ret);
if (ret) {
kalSendAeeWarning(HIF_USB_ERR_TITLE_STR,
HIF_USB_ERR_DESC_STR "USB() reports error: %x retry: %u", ret, ucRetryCount);
DBGLOG(HAL, ERROR, "usb_readl() reports error: %x retry: %u\n", ret, ucRetryCount);
} else {
DBGLOG(HAL, INFO, "Get CR[0x%08x] value[0x%08x]\n", u4Register, *pu4Value);
}
return (ret) ? FALSE : TRUE;
} /* end of kalDevRegRead() */
/*----------------------------------------------------------------------------*/
/*!
* \brief Write a 32-bit device register
*
* \param[in] prGlueInfo Pointer to the GLUE_INFO_T structure.
* \param[in] u4Register Register offset
* \param[in] u4Value Value to be written
*
* \retval TRUE operation success
* \retval FALSE operation fail
*/
/*----------------------------------------------------------------------------*/
BOOL kalDevRegWrite(IN P_GLUE_INFO_T prGlueInfo, IN UINT_32 u4Register, IN UINT_32 u4Value)
{
int ret = 0;
UINT_8 ucRetryCount = 0;
ASSERT(prGlueInfo);
do {
ret = mtk_usb_vendor_request(prGlueInfo, 0, DEVICE_VENDOR_REQUEST_OUT, VND_REQ_REG_WRITE,
(u4Register & 0xffff0000) >> 16, (u4Register & 0x0000ffff), &u4Value,
sizeof(u4Value));
if (ret || ucRetryCount)
DBGLOG(HAL, ERROR, "usb_control_msg() status: %d retry: %u\n", ret, ucRetryCount);
ucRetryCount++;
if (ucRetryCount > HIF_USB_ACCESS_RETRY_LIMIT)
break;
} while (ret);
if (ret) {
kalSendAeeWarning(HIF_USB_ERR_TITLE_STR,
HIF_USB_ERR_DESC_STR "usb_writel() reports error: %x retry: %u", ret, ucRetryCount);
DBGLOG(HAL, ERROR, "usb_writel() reports error: %x retry: %u\n", ret, ucRetryCount);
} else {
DBGLOG(HAL, INFO, "Set CR[0x%08x] value[0x%08x]\n", u4Register, u4Value);
}
return (ret) ? FALSE : TRUE;
} /* end of kalDevRegWrite() */
/*----------------------------------------------------------------------------*/
/*!
* \brief Read device I/O port
*
* \param[in] prGlueInfo Pointer to the GLUE_INFO_T structure.
* \param[in] u2Port I/O port offset
* \param[in] u2Len Length to be read
* \param[out] pucBuf Pointer to read buffer
* \param[in] u2ValidOutBufSize Length of the buffer valid to be accessed
*
* \retval TRUE operation success
* \retval FALSE operation fail
*/
/*----------------------------------------------------------------------------*/
BOOL
kalDevPortRead(IN P_GLUE_INFO_T prGlueInfo,
IN UINT_16 u2Port, IN UINT_32 u4Len, OUT PUINT_8 pucBuf, IN UINT_32 u4ValidOutBufSize)
{
P_GL_HIF_INFO_T prHifInfo = NULL;
PUINT_8 pucDst = NULL;
/* int count = u4Len; */
int ret = 0;
/* int bNum = 0; */
#if DBG
DBGLOG(HAL, INFO, "++kalDevPortRead++ buf:0x%p, port:0x%x, length:%d\n", pucBuf, u2Port, u4Len);
#endif
ASSERT(prGlueInfo);
prHifInfo = &prGlueInfo->rHifInfo;
ASSERT(pucBuf);
pucDst = pucBuf;
ASSERT(u4Len <= u4ValidOutBufSize);
u2Port &= MTK_USB_PORT_MASK;
if (prGlueInfo->rHifInfo.eEventEpType == EVENT_EP_TYPE_INTR &&
u2Port == (USB_EVENT_EP_IN & USB_ENDPOINT_NUMBER_MASK)) {
/* maximize buff len for usb in */
ret = mtk_usb_intr_in_msg(&prGlueInfo->rHifInfo, u4ValidOutBufSize, pucDst, u2Port);
if (ret != u4Len) {
DBGLOG(HAL, WARN, "usb_interrupt_msg(IN=%d) Warning. Data is not completed. (receive %d/%u)\n",
u2Port, ret, u4Len);
}
ret = ret >= 0 ? 0 : ret;
} else if (u2Port >= MTK_USB_BULK_IN_MIN_EP && u2Port <= MTK_USB_BULK_IN_MAX_EP) {
/* maximize buff len for usb in */
ret = mtk_usb_bulk_in_msg(&prGlueInfo->rHifInfo, u4ValidOutBufSize, pucDst, u2Port);
if (ret != u4Len) {
DBGLOG(HAL, WARN, "usb_bulk_msg(IN=%d) Warning. Data is not completed. (receive %d/%u)\n",
u2Port, ret, u4Len);
}
ret = ret >= 0 ? 0 : ret;
} else {
DBGLOG(HAL, ERROR, "kalDevPortRead reports error: invalid port %x\n", u2Port);
ret = -EINVAL;
}
if (ret) {
kalSendAeeWarning(HIF_USB_ERR_TITLE_STR, HIF_USB_ERR_DESC_STR "usb_readsb() reports error: %x", ret);
DBGLOG(HAL, ERROR, "usb_readsb() reports error: %x\n", ret);
}
return (ret) ? FALSE : TRUE;
} /* end of kalDevPortRead() */
/*----------------------------------------------------------------------------*/
/*!
* \brief Write device I/O port
*
* \param[in] prGlueInfo Pointer to the GLUE_INFO_T structure.
* \param[in] u2Port I/O port offset
* \param[in] u2Len Length to be write
* \param[in] pucBuf Pointer to write buffer
* \param[in] u2ValidInBufSize Length of the buffer valid to be accessed
*
* \retval TRUE operation success
* \retval FALSE operation fail
*/
/*----------------------------------------------------------------------------*/
BOOL
kalDevPortWrite(IN P_GLUE_INFO_T prGlueInfo,
IN UINT_16 u2Port, IN UINT_32 u4Len, IN PUINT_8 pucBuf, IN UINT_32 u4ValidInBufSize)
{
P_GL_HIF_INFO_T prHifInfo = NULL;
PUINT_8 pucSrc = NULL;
/* int count = u4Len; */
int ret = 0;
/* int bNum = 0; */
#if DBG
DBGLOG(HAL, INFO, "++kalDevPortWrite++ buf:0x%p, port:0x%x, length:%d\n", pucBuf, u2Port, u4Len);
#endif
ASSERT(prGlueInfo);
prHifInfo = &prGlueInfo->rHifInfo;
ASSERT(pucBuf);
pucSrc = pucBuf;
ASSERT((u4Len + LEN_USB_UDMA_TX_TERMINATOR) <= u4ValidInBufSize);
kalMemZero(pucSrc + u4Len, LEN_USB_UDMA_TX_TERMINATOR);
u4Len += LEN_USB_UDMA_TX_TERMINATOR;
u2Port &= MTK_USB_PORT_MASK;
if (u2Port >= MTK_USB_BULK_OUT_MIN_EP && u2Port <= MTK_USB_BULK_OUT_MAX_EP) {
ret = mtk_usb_bulk_out_msg(&prGlueInfo->rHifInfo, u4Len, pucSrc, 8);
if (ret != u4Len) {
DBGLOG(HAL, WARN, "usb_bulk_msg(OUT=%d) Warning. Data is not completed. (receive %d/%u)\n",
u2Port, ret, u4Len);
}
ret = ret >= 0 ? 0 : ret;
} else {
DBGLOG(HAL, ERROR, "kalDevPortWrite reports error: invalid port %x\n", u2Port);
ret = -EINVAL;
}
if (ret) {
kalSendAeeWarning(HIF_USB_ERR_TITLE_STR, HIF_USB_ERR_DESC_STR "usb_writesb() reports error: %x", ret);
DBGLOG(HAL, ERROR, "usb_writesb() reports error: %x\n", ret);
}
return (ret) ? FALSE : TRUE;
} /* end of kalDevPortWrite() */
/*----------------------------------------------------------------------------*/
/*!
* \brief Set power state
*
* \param[in] prGlueInfo Pointer to the GLUE_INFO_T structure.
* \param[in] ePowerMode
*
* \return (none)
*/
/*----------------------------------------------------------------------------*/
VOID glSetPowerState(IN P_GLUE_INFO_T prGlueInfo, IN UINT_32 ePowerMode)
{
}
/*----------------------------------------------------------------------------*/
/*!
* \brief Write data to device
*
* \param[in] prGlueInfo Pointer to the GLUE_INFO_T structure.
* \param[in] prMsduInfo msdu info
*
* \retval TRUE operation success
* \retval FALSE operation fail
*/
/*----------------------------------------------------------------------------*/
BOOL kalDevWriteData(IN P_GLUE_INFO_T prGlueInfo, IN P_MSDU_INFO_T prMsduInfo)
{
halTxUSBSendData(prGlueInfo, prMsduInfo);
return TRUE;
}
/*----------------------------------------------------------------------------*/
/*!
* \brief Kick Tx data to device
*
* \param[in] prGlueInfo Pointer to the GLUE_INFO_T structure.
*
* \retval TRUE operation success
* \retval FALSE operation fail
*/
/*----------------------------------------------------------------------------*/
BOOL kalDevKickData(IN P_GLUE_INFO_T prGlueInfo)
{
#if 0
halTxUSBKickData(prGlueInfo);
#endif
return TRUE;
}
/*----------------------------------------------------------------------------*/
/*!
* \brief Write command to device
*
* \param[in] prGlueInfo Pointer to the GLUE_INFO_T structure.
* \param[in] u4Addr I/O port offset
* \param[in] ucData Single byte of data to be written
*
* \retval TRUE operation success
* \retval FALSE operation fail
*/
/*----------------------------------------------------------------------------*/
BOOL kalDevWriteCmd(IN P_GLUE_INFO_T prGlueInfo, IN P_CMD_INFO_T prCmdInfo, IN UINT_8 ucTC)
{
halTxUSBSendCmd(prGlueInfo, ucTC, prCmdInfo);
return TRUE;
}
void glGetDev(PVOID ctx, struct device **dev)
{
struct usb_interface *prUsbIntf = (struct usb_interface *) ctx;
struct usb_device *prUsbDev = interface_to_usbdev(prUsbIntf);
*dev = &prUsbDev->dev;
}
void glGetHifDev(P_GL_HIF_INFO_T prHif, struct device **dev)
{
*dev = &(prHif->udev->dev);
}