| /* |
| * Copyright 2017-2018 NXP |
| * All rights reserved. |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| * |
| */ |
| |
| |
| /*********************************************************************************************************************** |
| * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file |
| * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. |
| **********************************************************************************************************************/ |
| |
| /* |
| * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* |
| !!GlobalInfo |
| product: Pins v4.0 |
| processor: MIMX8MQ6xxxJZ |
| package_id: MIMX8MQ6DVAJZ |
| mcu_data: ksdk2_0 |
| processor_version: 0.0.0 |
| * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** |
| */ |
| |
| #include "fsl_common.h" |
| #include "fsl_iomuxc.h" |
| #include "pin_mux.h" |
| |
| /* FUNCTION ************************************************************************************************************ |
| * |
| * Function Name : BOARD_InitBootPins |
| * Description : Calls initialization functions. |
| * |
| * END ****************************************************************************************************************/ |
| void BOARD_InitBootPins(void) |
| { |
| } |
| |
| /* |
| * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* |
| BOARD_InitPins: |
| - options: {coreID: m4} |
| - pin_list: |
| - {pin_num: B6, peripheral: UART2, signal: uart_rx, pin_signal: UART2_RXD, PUE: Enabled, SRE: MEDIUM, DSE: OHM_45} |
| - {pin_num: D6, peripheral: UART2, signal: uart_tx, pin_signal: UART2_TXD, PUE: Enabled, SRE: MEDIUM, DSE: OHM_45} |
| - {pin_num: H5, peripheral: SAI2, signal: sai_mclk, pin_signal: SAI2_MCLK, SION: DISABLED, HYS: Enabled, SRE: MEDIUM, DSE: OHM_105} |
| - {pin_num: J5, peripheral: SAI2, signal: sai_tx_bclk, pin_signal: SAI2_TXC, HYS: Enabled, SRE: MEDIUM, DSE: OHM_105} |
| - {pin_num: G5, peripheral: SAI2, signal: 'sai_tx_data, 0', pin_signal: SAI2_TXD0, HYS: Enabled, SRE: MEDIUM, DSE: OHM_105} |
| - {pin_num: H4, peripheral: SAI2, signal: sai_tx_sync, pin_signal: SAI2_TXFS, HYS: Enabled, SRE: MEDIUM, DSE: OHM_105, VSEL: VSEL_0} |
| - {pin_num: N7, peripheral: GPIO1, signal: 'gpio_io, 08', pin_signal: GPIO1_IO08, SION: ENABLED} |
| * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** |
| */ |
| |
| /* FUNCTION ************************************************************************************************************ |
| * |
| * Function Name : BOARD_InitPins |
| * |
| * END ****************************************************************************************************************/ |
| void BOARD_InitPins(void) { /*!< Function assigned for the core: Cortex-M4[m4] */ |
| IOMUXC_SetPinMux(IOMUXC_GPIO1_IO08_GPIO1_IO08, 1U); |
| IOMUXC_SetPinMux(IOMUXC_SAI2_MCLK_SAI2_MCLK, 0U); |
| IOMUXC_SetPinConfig(IOMUXC_SAI2_MCLK_SAI2_MCLK, |
| IOMUXC_SW_PAD_CTL_PAD_DSE(2U) | |
| IOMUXC_SW_PAD_CTL_PAD_SRE(1U) | |
| IOMUXC_SW_PAD_CTL_PAD_HYS_MASK); |
| IOMUXC_SetPinMux(IOMUXC_SAI2_TXC_SAI2_TX_BCLK, 0U); |
| IOMUXC_SetPinConfig(IOMUXC_SAI2_TXC_SAI2_TX_BCLK, |
| IOMUXC_SW_PAD_CTL_PAD_DSE(2U) | |
| IOMUXC_SW_PAD_CTL_PAD_SRE(1U) | |
| IOMUXC_SW_PAD_CTL_PAD_HYS_MASK); |
| IOMUXC_SetPinMux(IOMUXC_SAI2_TXD0_SAI2_TX_DATA0, 0U); |
| IOMUXC_SetPinConfig(IOMUXC_SAI2_TXD0_SAI2_TX_DATA0, |
| IOMUXC_SW_PAD_CTL_PAD_DSE(2U) | |
| IOMUXC_SW_PAD_CTL_PAD_SRE(1U) | |
| IOMUXC_SW_PAD_CTL_PAD_HYS_MASK); |
| IOMUXC_SetPinMux(IOMUXC_SAI2_TXFS_SAI2_TX_SYNC, 0U); |
| IOMUXC_SetPinConfig(IOMUXC_SAI2_TXFS_SAI2_TX_SYNC, |
| IOMUXC_SW_PAD_CTL_PAD_DSE(2U) | |
| IOMUXC_SW_PAD_CTL_PAD_SRE(1U) | |
| IOMUXC_SW_PAD_CTL_PAD_HYS_MASK); |
| IOMUXC_SetPinMux(IOMUXC_UART2_RXD_UART2_RX, 0U); |
| IOMUXC_SetPinConfig(IOMUXC_UART2_RXD_UART2_RX, |
| IOMUXC_SW_PAD_CTL_PAD_DSE(6U) | |
| IOMUXC_SW_PAD_CTL_PAD_SRE(1U) | |
| IOMUXC_SW_PAD_CTL_PAD_PUE_MASK); |
| IOMUXC_SetPinMux(IOMUXC_UART2_TXD_UART2_TX, 0U); |
| IOMUXC_SetPinConfig(IOMUXC_UART2_TXD_UART2_TX, |
| IOMUXC_SW_PAD_CTL_PAD_DSE(6U) | |
| IOMUXC_SW_PAD_CTL_PAD_SRE(1U) | |
| IOMUXC_SW_PAD_CTL_PAD_PUE_MASK); |
| } |
| |
| /*********************************************************************************************************************** |
| * EOF |
| **********************************************************************************************************************/ |
