Steffen Trumtrar | be3a568 | 2013-01-10 11:27:27 +0100 | [diff] [blame] | 1 | /* |
| 2 | * Copyright 2012 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix |
| 3 | * Copyright 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de>, Pengutronix |
| 4 | * |
| 5 | * The code contained herein is licensed under the GNU General Public |
| 6 | * License. You may obtain a copy of the GNU General Public License |
| 7 | * Version 2 or later at the following locations: |
| 8 | * |
| 9 | * http://www.opensource.org/licenses/gpl-license.html |
| 10 | * http://www.gnu.org/copyleft/gpl.html |
| 11 | */ |
| 12 | |
| 13 | /dts-v1/; |
| 14 | /include/ "imx53-tqma53.dtsi" |
| 15 | |
| 16 | / { |
| 17 | model = "TQ MBa53 starter kit"; |
| 18 | compatible = "tq,mba53", "tq,tqma53", "fsl,imx53"; |
| 19 | }; |
| 20 | |
| 21 | &iomuxc { |
| 22 | lvds1 { |
| 23 | pinctrl_lvds1_1: lvds1-grp1 { |
| 24 | fsl,pins = <730 0x10000 /* LVDS0_TX3 */ |
| 25 | 732 0x10000 /* LVDS0_CLK */ |
| 26 | 734 0x10000 /* LVDS0_TX2 */ |
| 27 | 736 0x10000 /* LVDS0_TX1 */ |
| 28 | 738 0x10000>; /* LVDS0_TX0 */ |
| 29 | }; |
| 30 | |
| 31 | pinctrl_lvds1_2: lvds1-grp2 { |
| 32 | fsl,pins = <720 0x10000 /* LVDS1_TX3 */ |
| 33 | 722 0x10000 /* LVDS1_TX2 */ |
| 34 | 724 0x10000 /* LVDS1_CLK */ |
| 35 | 726 0x10000 /* LVDS1_TX1 */ |
| 36 | 728 0x10000>; /* LVDS1_TX0 */ |
| 37 | }; |
| 38 | }; |
| 39 | |
| 40 | disp1 { |
| 41 | pinctrl_disp1_1: disp1-grp1 { |
| 42 | fsl,pins = <689 0x10000 /* DISP1_DRDY */ |
| 43 | 482 0x10000 /* DISP1_HSYNC */ |
| 44 | 489 0x10000 /* DISP1_VSYNC */ |
| 45 | 684 0x10000 /* DISP1_DAT_0 */ |
| 46 | 515 0x10000 /* DISP1_DAT_22 */ |
| 47 | 523 0x10000 /* DISP1_DAT_23 */ |
| 48 | 543 0x10000 /* DISP1_DAT_21 */ |
| 49 | 553 0x10000 /* DISP1_DAT_20 */ |
| 50 | 558 0x10000 /* DISP1_DAT_19 */ |
| 51 | 564 0x10000 /* DISP1_DAT_18 */ |
| 52 | 570 0x10000 /* DISP1_DAT_17 */ |
| 53 | 575 0x10000 /* DISP1_DAT_16 */ |
| 54 | 580 0x10000 /* DISP1_DAT_15 */ |
| 55 | 585 0x10000 /* DISP1_DAT_14 */ |
| 56 | 590 0x10000 /* DISP1_DAT_13 */ |
| 57 | 595 0x10000 /* DISP1_DAT_12 */ |
| 58 | 628 0x10000 /* DISP1_DAT_11 */ |
| 59 | 634 0x10000 /* DISP1_DAT_10 */ |
| 60 | 639 0x10000 /* DISP1_DAT_9 */ |
| 61 | 644 0x10000 /* DISP1_DAT_8 */ |
| 62 | 649 0x10000 /* DISP1_DAT_7 */ |
| 63 | 654 0x10000 /* DISP1_DAT_6 */ |
| 64 | 659 0x10000 /* DISP1_DAT_5 */ |
| 65 | 664 0x10000 /* DISP1_DAT_4 */ |
| 66 | 669 0x10000 /* DISP1_DAT_3 */ |
| 67 | 674 0x10000 /* DISP1_DAT_2 */ |
| 68 | 679 0x10000 /* DISP1_DAT_1 */ |
| 69 | 684 0x10000>; /* DISP1_DAT_0 */ |
| 70 | }; |
| 71 | }; |
| 72 | }; |
| 73 | |
| 74 | &cspi { |
| 75 | status = "okay"; |
| 76 | }; |
| 77 | |
| 78 | &i2c2 { |
| 79 | codec: sgtl5000@a { |
| 80 | compatible = "fsl,sgtl5000"; |
| 81 | reg = <0x0a>; |
| 82 | }; |
| 83 | |
| 84 | expander: pca9554@20 { |
| 85 | compatible = "pca9554"; |
| 86 | reg = <0x20>; |
| 87 | interrupts = <109>; |
| 88 | }; |
| 89 | |
| 90 | sensor2: lm75@49 { |
| 91 | compatible = "lm75"; |
| 92 | reg = <0x49>; |
| 93 | }; |
| 94 | }; |
| 95 | |
| 96 | &fec { |
| 97 | status = "okay"; |
| 98 | }; |
| 99 | |
| 100 | &esdhc2 { |
| 101 | status = "okay"; |
| 102 | }; |
| 103 | |
| 104 | &uart3 { |
| 105 | status = "okay"; |
| 106 | }; |
| 107 | |
| 108 | &ecspi1 { |
| 109 | status = "okay"; |
| 110 | }; |
| 111 | |
| 112 | &uart1 { |
| 113 | status = "okay"; |
| 114 | }; |
| 115 | |
| 116 | &uart2 { |
| 117 | status = "okay"; |
| 118 | }; |
| 119 | |
| 120 | &can1 { |
| 121 | status = "okay"; |
| 122 | }; |
| 123 | |
| 124 | &can2 { |
| 125 | status = "okay"; |
| 126 | }; |
| 127 | |
| 128 | &i2c3 { |
| 129 | status = "okay"; |
| 130 | }; |