| /* |
| * Copyright (c) 2004-2011 Atheros Communications Inc. |
| * Copyright (c) 2011-2012 Qualcomm Atheros, Inc. |
| * Copyright (c) 2016-2017 Erik Stromdahl <erik.stromdahl@gmail.com> |
| * |
| * Permission to use, copy, modify, and/or distribute this software for any |
| * purpose with or without fee is hereby granted, provided that the above |
| * copyright notice and this permission notice appear in all copies. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES |
| * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR |
| * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
| * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN |
| * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF |
| * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
| */ |
| |
| #ifndef _SDIO_H_ |
| #define _SDIO_H_ |
| |
| #define ATH10K_HIF_MBOX_BLOCK_SIZE 256 |
| |
| #define QCA_MANUFACTURER_ID_BASE GENMASK(11, 8) |
| #define QCA_MANUFACTURER_ID_AR6005_BASE 0x5 |
| #define QCA_MANUFACTURER_ID_QCA9377_BASE 0x7 |
| #define QCA_SDIO_ID_AR6005_BASE 0x500 |
| #define QCA_SDIO_ID_QCA9377_BASE 0x700 |
| #define QCA_MANUFACTURER_ID_REV_MASK 0x00FF |
| #define QCA_MANUFACTURER_CODE 0x271 /* Qualcomm/Atheros */ |
| |
| #define ATH10K_SDIO_MAX_BUFFER_SIZE 4096 /*Unsure of this constant*/ |
| |
| /* Mailbox address in SDIO address space */ |
| #define ATH10K_HIF_MBOX_BASE_ADDR 0x1000 |
| #define ATH10K_HIF_MBOX_WIDTH 0x800 |
| |
| #define ATH10K_HIF_MBOX_TOT_WIDTH \ |
| (ATH10K_HIF_MBOX_NUM_MAX * ATH10K_HIF_MBOX_WIDTH) |
| |
| #define ATH10K_HIF_MBOX0_EXT_BASE_ADDR 0x5000 |
| #define ATH10K_HIF_MBOX0_EXT_WIDTH (36 * 1024) |
| #define ATH10K_HIF_MBOX0_EXT_WIDTH_ROME_2_0 (56 * 1024) |
| #define ATH10K_HIF_MBOX1_EXT_WIDTH (36 * 1024) |
| #define ATH10K_HIF_MBOX_DUMMY_SPACE_SIZE (2 * 1024) |
| |
| #define ATH10K_HTC_MBOX_MAX_PAYLOAD_LENGTH \ |
| (ATH10K_SDIO_MAX_BUFFER_SIZE - sizeof(struct ath10k_htc_hdr)) |
| |
| #define ATH10K_HIF_MBOX_NUM_MAX 4 |
| #define ATH10K_SDIO_BUS_REQUEST_MAX_NUM 64 |
| |
| #define ATH10K_SDIO_HIF_COMMUNICATION_TIMEOUT_HZ (100 * HZ) |
| |
| /* HTC runs over mailbox 0 */ |
| #define ATH10K_HTC_MAILBOX 0 |
| #define ATH10K_HTC_MAILBOX_MASK BIT(ATH10K_HTC_MAILBOX) |
| |
| /* GMBOX addresses */ |
| #define ATH10K_HIF_GMBOX_BASE_ADDR 0x7000 |
| #define ATH10K_HIF_GMBOX_WIDTH 0x4000 |
| |
| /* Modified versions of the sdio.h macros. |
| * The macros in sdio.h can't be used easily with the FIELD_{PREP|GET} |
| * macros in bitfield.h, so we define our own macros here. |
| */ |
| #define ATH10K_SDIO_DRIVE_DTSX_MASK \ |
| (SDIO_DRIVE_DTSx_MASK << SDIO_DRIVE_DTSx_SHIFT) |
| |
| #define ATH10K_SDIO_DRIVE_DTSX_TYPE_B 0 |
| #define ATH10K_SDIO_DRIVE_DTSX_TYPE_A 1 |
| #define ATH10K_SDIO_DRIVE_DTSX_TYPE_C 2 |
| #define ATH10K_SDIO_DRIVE_DTSX_TYPE_D 3 |
| |
| /* SDIO CCCR register definitions */ |
| #define CCCR_SDIO_IRQ_MODE_REG 0xF0 |
| #define CCCR_SDIO_IRQ_MODE_REG_SDIO3 0x16 |
| |
| #define CCCR_SDIO_DRIVER_STRENGTH_ENABLE_ADDR 0xF2 |
| |
| #define CCCR_SDIO_DRIVER_STRENGTH_ENABLE_A 0x02 |
| #define CCCR_SDIO_DRIVER_STRENGTH_ENABLE_C 0x04 |
| #define CCCR_SDIO_DRIVER_STRENGTH_ENABLE_D 0x08 |
| |
| #define CCCR_SDIO_ASYNC_INT_DELAY_ADDRESS 0xF0 |
| #define CCCR_SDIO_ASYNC_INT_DELAY_MASK 0xC0 |
| |
| /* mode to enable special 4-bit interrupt assertion without clock */ |
| #define SDIO_IRQ_MODE_ASYNC_4BIT_IRQ BIT(0) |
| #define SDIO_IRQ_MODE_ASYNC_4BIT_IRQ_SDIO3 BIT(1) |
| |
| #define ATH10K_SDIO_TARGET_DEBUG_INTR_MASK 0x01 |
| |
| /* The theoretical maximum number of RX messages that can be fetched |
| * from the mbox interrupt handler in one loop is derived in the following |
| * way: |
| * |
| * Let's assume that each packet in a bundle of the maximum bundle size |
| * (HTC_HOST_MAX_MSG_PER_RX_BUNDLE) has the HTC header bundle count set |
| * to the maximum value (HTC_HOST_MAX_MSG_PER_RX_BUNDLE). |
| * |
| * in this case the driver must allocate |
| * (HTC_HOST_MAX_MSG_PER_RX_BUNDLE * HTC_HOST_MAX_MSG_PER_RX_BUNDLE) skb's. |
| */ |
| #define ATH10K_SDIO_MAX_RX_MSGS \ |
| (HTC_HOST_MAX_MSG_PER_RX_BUNDLE * HTC_HOST_MAX_MSG_PER_RX_BUNDLE) |
| |
| #define ATH10K_FIFO_TIMEOUT_AND_CHIP_CONTROL 0x00000868u |
| #define ATH10K_FIFO_TIMEOUT_AND_CHIP_CONTROL_DISABLE_SLEEP_OFF 0xFFFEFFFF |
| #define ATH10K_FIFO_TIMEOUT_AND_CHIP_CONTROL_DISABLE_SLEEP_ON 0x10000 |
| |
| struct ath10k_sdio_bus_request { |
| struct list_head list; |
| |
| /* sdio address */ |
| u32 address; |
| |
| struct sk_buff *skb; |
| enum ath10k_htc_ep_id eid; |
| int status; |
| /* Specifies if the current request is an HTC message. |
| * If not, the eid is not applicable an the TX completion handler |
| * associated with the endpoint will not be invoked. |
| */ |
| bool htc_msg; |
| /* Completion that (if set) will be invoked for non HTC requests |
| * (htc_msg == false) when the request has been processed. |
| */ |
| struct completion *comp; |
| }; |
| |
| struct ath10k_sdio_rx_data { |
| struct sk_buff *skb; |
| size_t alloc_len; |
| size_t act_len; |
| enum ath10k_htc_ep_id eid; |
| bool part_of_bundle; |
| bool last_in_bundle; |
| bool trailer_only; |
| int status; |
| }; |
| |
| struct ath10k_sdio_irq_proc_regs { |
| u8 host_int_status; |
| u8 cpu_int_status; |
| u8 error_int_status; |
| u8 counter_int_status; |
| u8 mbox_frame; |
| u8 rx_lookahead_valid; |
| u8 host_int_status2; |
| u8 gmbox_rx_avail; |
| __le32 rx_lookahead[2]; |
| __le32 rx_gmbox_lookahead_alias[2]; |
| }; |
| |
| struct ath10k_sdio_irq_enable_regs { |
| u8 int_status_en; |
| u8 cpu_int_status_en; |
| u8 err_int_status_en; |
| u8 cntr_int_status_en; |
| }; |
| |
| struct ath10k_sdio_irq_data { |
| /* protects irq_proc_reg and irq_en_reg below. |
| * We use a mutex here and not a spinlock since we will have the |
| * mutex locked while calling the sdio_memcpy_ functions. |
| * These function require non atomic context, and hence, spinlocks |
| * can be held while calling these functions. |
| */ |
| struct mutex mtx; |
| struct ath10k_sdio_irq_proc_regs *irq_proc_reg; |
| struct ath10k_sdio_irq_enable_regs *irq_en_reg; |
| }; |
| |
| struct ath10k_mbox_ext_info { |
| u32 htc_ext_addr; |
| u32 htc_ext_sz; |
| }; |
| |
| struct ath10k_mbox_info { |
| u32 htc_addr; |
| struct ath10k_mbox_ext_info ext_info[2]; |
| u32 block_size; |
| u32 block_mask; |
| u32 gmbox_addr; |
| u32 gmbox_sz; |
| }; |
| |
| struct ath10k_sdio { |
| struct sdio_func *func; |
| |
| struct ath10k_mbox_info mbox_info; |
| bool swap_mbox; |
| u32 mbox_addr[ATH10K_HTC_EP_COUNT]; |
| u32 mbox_size[ATH10K_HTC_EP_COUNT]; |
| |
| /* available bus requests */ |
| struct ath10k_sdio_bus_request bus_req[ATH10K_SDIO_BUS_REQUEST_MAX_NUM]; |
| /* free list of bus requests */ |
| struct list_head bus_req_freeq; |
| /* protects access to bus_req_freeq */ |
| spinlock_t lock; |
| |
| struct ath10k_sdio_rx_data rx_pkts[ATH10K_SDIO_MAX_RX_MSGS]; |
| size_t n_rx_pkts; |
| |
| struct ath10k *ar; |
| struct ath10k_sdio_irq_data irq_data; |
| |
| /* temporary buffer for BMI requests */ |
| u8 *bmi_buf; |
| |
| bool is_disabled; |
| |
| struct workqueue_struct *workqueue; |
| struct work_struct wr_async_work; |
| struct list_head wr_asyncq; |
| /* protects access to wr_asyncq */ |
| spinlock_t wr_async_lock; |
| }; |
| |
| static inline struct ath10k_sdio *ath10k_sdio_priv(struct ath10k *ar) |
| { |
| return (struct ath10k_sdio *)ar->drv_priv; |
| } |
| |
| #endif |
