drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.h - linux-mtk - Git at Google

 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Freescale GPMI NAND Flash Driver
  *
  * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
  * Copyright (C) 2008 Embedded Alley Solutions, Inc.
  */
 #ifndef __DRIVERS_MTD_NAND_GPMI_NAND_H
 #define __DRIVERS_MTD_NAND_GPMI_NAND_H

 #include <linux/mtd/rawnand.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 #include <linux/dmaengine.h>

 #define GPMI_CLK_MAX 5 /* MX6Q needs five clocks */
 struct resources {
 	void __iomem  *gpmi_regs;
 	void __iomem  *bch_regs;
 	unsigned int  dma_low_channel;
 	unsigned int  dma_high_channel;
 	struct clk    *clock[GPMI_CLK_MAX];
 };

 /**
  * struct bch_geometry - BCH geometry description.
  * @gf_len:                   The length of Galois Field. (e.g., 13 or 14)
  * @ecc_strength:             A number that describes the strength of the ECC
  *                            algorithm.
  * @page_size:                The size, in bytes, of a physical page, including
  *                            both data and OOB.
  * @metadata_size:            The size, in bytes, of the metadata.
  * @ecc_chunk_size:           The size, in bytes, of a single ECC chunk. Note
  *                            the first chunk in the page includes both data and
  *                            metadata, so it's a bit larger than this value.
  * @ecc_chunk_count:          The number of ECC chunks in the page,
  * @payload_size:             The size, in bytes, of the payload buffer.
  * @auxiliary_size:           The size, in bytes, of the auxiliary buffer.
  * @auxiliary_status_offset:  The offset into the auxiliary buffer at which
  *                            the ECC status appears.
  * @block_mark_byte_offset:   The byte offset in the ECC-based page view at
  *                            which the underlying physical block mark appears.
  * @block_mark_bit_offset:    The bit offset into the ECC-based page view at
  *                            which the underlying physical block mark appears.
  */
 struct bch_geometry {
 	unsigned int  gf_len;
 	unsigned int  ecc_strength;
 	unsigned int  page_size;
 	unsigned int  metadata_size;
 	unsigned int  ecc_chunk_size;
 	unsigned int  ecc_chunk_count;
 	unsigned int  payload_size;
 	unsigned int  auxiliary_size;
 	unsigned int  auxiliary_status_offset;
 	unsigned int  block_mark_byte_offset;
 	unsigned int  block_mark_bit_offset;
 };

 /**
  * struct boot_rom_geometry - Boot ROM geometry description.
  * @stride_size_in_pages:        The size of a boot block stride, in pages.
  * @search_area_stride_exponent: The logarithm to base 2 of the size of a
  *                               search area in boot block strides.
  */
 struct boot_rom_geometry {
 	unsigned int  stride_size_in_pages;
 	unsigned int  search_area_stride_exponent;
 };

 enum gpmi_type {
 	IS_MX23,
 	IS_MX28,
 	IS_MX6Q,
 	IS_MX6SX,
 	IS_MX7D,
 };

 struct gpmi_devdata {
 	enum gpmi_type type;
 	int bch_max_ecc_strength;
 	int max_chain_delay; /* See the async EDO mode */
 	const char * const *clks;
 	const int clks_count;
 };

 /**
  * struct gpmi_nfc_hardware_timing - GPMI hardware timing parameters.
  * @must_apply_timings:        Whether controller timings have already been
  *                             applied or not (useful only while there is
  *                             support for only one chip select)
  * @clk_rate:                  The clock rate that must be used to derive the
  *                             following parameters
  * @timing0:                   HW_GPMI_TIMING0 register
  * @timing1:                   HW_GPMI_TIMING1 register
  * @ctrl1n:                    HW_GPMI_CTRL1n register
  */
 struct gpmi_nfc_hardware_timing {
 	bool must_apply_timings;
 	unsigned long int clk_rate;
 	u32 timing0;
 	u32 timing1;
 	u32 ctrl1n;
 };

 struct gpmi_nand_data {
 	/* Devdata */
 	const struct gpmi_devdata *devdata;

 	/* System Interface */
 	struct device		*dev;
 	struct platform_device	*pdev;

 	/* Resources */
 	struct resources	resources;

 	/* Flash Hardware */
 	struct gpmi_nfc_hardware_timing hw;

 	/* BCH */
 	struct bch_geometry	bch_geometry;
 	struct completion	bch_done;

 	/* NAND Boot issue */
 	bool			swap_block_mark;
 	struct boot_rom_geometry rom_geometry;

 	/* MTD / NAND */
 	struct nand_chip	nand;

 	/* General-use Variables */
 	int			current_chip;
 	unsigned int		command_length;

 	struct scatterlist	cmd_sgl;
 	char			*cmd_buffer;

 	struct scatterlist	data_sgl;
 	char			*data_buffer_dma;

 	void			*page_buffer_virt;
 	dma_addr_t		page_buffer_phys;
 	unsigned int		page_buffer_size;

 	void			*payload_virt;
 	dma_addr_t		payload_phys;

 	void			*auxiliary_virt;
 	dma_addr_t		auxiliary_phys;

 	void			*raw_buffer;

 	/* DMA channels */
 #define DMA_CHANS		8
 	struct dma_chan		*dma_chans[DMA_CHANS];
 	struct completion	dma_done;

 	/* private */
 	void			*private;
 };

 /* Common Services */
 int common_nfc_set_geometry(struct gpmi_nand_data *);
 struct dma_chan *get_dma_chan(struct gpmi_nand_data *);
 bool prepare_data_dma(struct gpmi_nand_data *, const void *buf, int len,
 		      enum dma_data_direction dr);
 int start_dma_without_bch_irq(struct gpmi_nand_data *,
 			      struct dma_async_tx_descriptor *);
 int start_dma_with_bch_irq(struct gpmi_nand_data *,
 			   struct dma_async_tx_descriptor *);

 /* GPMI-NAND helper function library */
 int gpmi_init(struct gpmi_nand_data *);
 void gpmi_clear_bch(struct gpmi_nand_data *);
 void gpmi_dump_info(struct gpmi_nand_data *);
 int bch_set_geometry(struct gpmi_nand_data *);
 int gpmi_is_ready(struct gpmi_nand_data *, unsigned chip);
 int gpmi_send_command(struct gpmi_nand_data *);
 int gpmi_enable_clk(struct gpmi_nand_data *this);
 int gpmi_disable_clk(struct gpmi_nand_data *this);
 int gpmi_setup_data_interface(struct mtd_info *mtd, int chipnr,
 			      const struct nand_data_interface *conf);
 void gpmi_nfc_apply_timings(struct gpmi_nand_data *this);
 int gpmi_read_data(struct gpmi_nand_data *, void *buf, int len);
 int gpmi_send_data(struct gpmi_nand_data *, const void *buf, int len);

 int gpmi_send_page(struct gpmi_nand_data *,
 		   dma_addr_t payload, dma_addr_t auxiliary);
 int gpmi_read_page(struct gpmi_nand_data *,
 		   dma_addr_t payload, dma_addr_t auxiliary);

 void gpmi_copy_bits(u8 *dst, size_t dst_bit_off,
 		    const u8 *src, size_t src_bit_off,
 		    size_t nbits);

 /* BCH : Status Block Completion Codes */
 #define STATUS_GOOD		0x00
 #define STATUS_ERASED		0xff
 #define STATUS_UNCORRECTABLE	0xfe

 /* Use the devdata to distinguish different Archs. */
 #define GPMI_IS_MX23(x)		((x)->devdata->type == IS_MX23)
 #define GPMI_IS_MX28(x)		((x)->devdata->type == IS_MX28)
 #define GPMI_IS_MX6Q(x)		((x)->devdata->type == IS_MX6Q)
 #define GPMI_IS_MX6SX(x)	((x)->devdata->type == IS_MX6SX)
 #define GPMI_IS_MX7D(x)		((x)->devdata->type == IS_MX7D)

 #define GPMI_IS_MX6(x)		(GPMI_IS_MX6Q(x) || GPMI_IS_MX6SX(x) || \
 				 GPMI_IS_MX7D(x))
 #endif
	/* SPDX-License-Identifier: GPL-2.0+ */
	/*
	* Freescale GPMI NAND Flash Driver
	*
	* Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
	* Copyright (C) 2008 Embedded Alley Solutions, Inc.
	*/
	#ifndef __DRIVERS_MTD_NAND_GPMI_NAND_H
	#define __DRIVERS_MTD_NAND_GPMI_NAND_H

	#include <linux/mtd/rawnand.h>
	#include <linux/platform_device.h>
	#include <linux/dma-mapping.h>
	#include <linux/dmaengine.h>

	#define GPMI_CLK_MAX 5 /* MX6Q needs five clocks */
	struct resources {
	void __iomem *gpmi_regs;
	void __iomem *bch_regs;
	unsigned int dma_low_channel;
	unsigned int dma_high_channel;
	struct clk *clock[GPMI_CLK_MAX];
	};

	/**
	* struct bch_geometry - BCH geometry description.
	* @gf_len: The length of Galois Field. (e.g., 13 or 14)
	* @ecc_strength: A number that describes the strength of the ECC
	* algorithm.
	* @page_size: The size, in bytes, of a physical page, including
	* both data and OOB.
	* @metadata_size: The size, in bytes, of the metadata.
	* @ecc_chunk_size: The size, in bytes, of a single ECC chunk. Note
	* the first chunk in the page includes both data and
	* metadata, so it's a bit larger than this value.
	* @ecc_chunk_count: The number of ECC chunks in the page,
	* @payload_size: The size, in bytes, of the payload buffer.
	* @auxiliary_size: The size, in bytes, of the auxiliary buffer.
	* @auxiliary_status_offset: The offset into the auxiliary buffer at which
	* the ECC status appears.
	* @block_mark_byte_offset: The byte offset in the ECC-based page view at
	* which the underlying physical block mark appears.
	* @block_mark_bit_offset: The bit offset into the ECC-based page view at
	* which the underlying physical block mark appears.
	*/
	struct bch_geometry {
	unsigned int gf_len;
	unsigned int ecc_strength;
	unsigned int page_size;
	unsigned int metadata_size;
	unsigned int ecc_chunk_size;
	unsigned int ecc_chunk_count;
	unsigned int payload_size;
	unsigned int auxiliary_size;
	unsigned int auxiliary_status_offset;
	unsigned int block_mark_byte_offset;
	unsigned int block_mark_bit_offset;
	};

	/**
	* struct boot_rom_geometry - Boot ROM geometry description.
	* @stride_size_in_pages: The size of a boot block stride, in pages.
	* @search_area_stride_exponent: The logarithm to base 2 of the size of a
	* search area in boot block strides.
	*/
	struct boot_rom_geometry {
	unsigned int stride_size_in_pages;
	unsigned int search_area_stride_exponent;
	};

	enum gpmi_type {
	IS_MX23,
	IS_MX28,
	IS_MX6Q,
	IS_MX6SX,
	IS_MX7D,
	};

	struct gpmi_devdata {
	enum gpmi_type type;
	int bch_max_ecc_strength;
	int max_chain_delay; /* See the async EDO mode */
	const char * const *clks;
	const int clks_count;
	};

	/**
	* struct gpmi_nfc_hardware_timing - GPMI hardware timing parameters.
	* @must_apply_timings: Whether controller timings have already been
	* applied or not (useful only while there is
	* support for only one chip select)
	* @clk_rate: The clock rate that must be used to derive the
	* following parameters
	* @timing0: HW_GPMI_TIMING0 register
	* @timing1: HW_GPMI_TIMING1 register
	* @ctrl1n: HW_GPMI_CTRL1n register
	*/
	struct gpmi_nfc_hardware_timing {
	bool must_apply_timings;
	unsigned long int clk_rate;
	u32 timing0;
	u32 timing1;
	u32 ctrl1n;
	};

	struct gpmi_nand_data {
	/* Devdata */
	const struct gpmi_devdata *devdata;

	/* System Interface */
	struct device *dev;
	struct platform_device *pdev;

	/* Resources */
	struct resources resources;

	/* Flash Hardware */
	struct gpmi_nfc_hardware_timing hw;

	/* BCH */
	struct bch_geometry bch_geometry;
	struct completion bch_done;

	/* NAND Boot issue */
	bool swap_block_mark;
	struct boot_rom_geometry rom_geometry;

	/* MTD / NAND */
	struct nand_chip nand;

	/* General-use Variables */
	int current_chip;
	unsigned int command_length;

	struct scatterlist cmd_sgl;
	char *cmd_buffer;

	struct scatterlist data_sgl;
	char *data_buffer_dma;

	void *page_buffer_virt;
	dma_addr_t page_buffer_phys;
	unsigned int page_buffer_size;

	void *payload_virt;
	dma_addr_t payload_phys;

	void *auxiliary_virt;
	dma_addr_t auxiliary_phys;

	void *raw_buffer;

	/* DMA channels */
	#define DMA_CHANS 8
	struct dma_chan *dma_chans[DMA_CHANS];
	struct completion dma_done;

	/* private */
	void *private;
	};

	/* Common Services */
	int common_nfc_set_geometry(struct gpmi_nand_data *);
	struct dma_chan get_dma_chan(struct gpmi_nand_data );
	bool prepare_data_dma(struct gpmi_nand_data , const void buf, int len,
	enum dma_data_direction dr);
	int start_dma_without_bch_irq(struct gpmi_nand_data *,
	struct dma_async_tx_descriptor *);
	int start_dma_with_bch_irq(struct gpmi_nand_data *,
	struct dma_async_tx_descriptor *);

	/* GPMI-NAND helper function library */
	int gpmi_init(struct gpmi_nand_data *);
	void gpmi_clear_bch(struct gpmi_nand_data *);
	void gpmi_dump_info(struct gpmi_nand_data *);
	int bch_set_geometry(struct gpmi_nand_data *);
	int gpmi_is_ready(struct gpmi_nand_data *, unsigned chip);
	int gpmi_send_command(struct gpmi_nand_data *);
	int gpmi_enable_clk(struct gpmi_nand_data *this);
	int gpmi_disable_clk(struct gpmi_nand_data *this);
	int gpmi_setup_data_interface(struct mtd_info *mtd, int chipnr,
	const struct nand_data_interface *conf);
	void gpmi_nfc_apply_timings(struct gpmi_nand_data *this);
	int gpmi_read_data(struct gpmi_nand_data , void buf, int len);
	int gpmi_send_data(struct gpmi_nand_data , const void buf, int len);

	int gpmi_send_page(struct gpmi_nand_data *,
	dma_addr_t payload, dma_addr_t auxiliary);
	int gpmi_read_page(struct gpmi_nand_data *,
	dma_addr_t payload, dma_addr_t auxiliary);

	void gpmi_copy_bits(u8 *dst, size_t dst_bit_off,
	const u8 *src, size_t src_bit_off,
	size_t nbits);

	/* BCH : Status Block Completion Codes */
	#define STATUS_GOOD 0x00
	#define STATUS_ERASED 0xff
	#define STATUS_UNCORRECTABLE 0xfe

	/* Use the devdata to distinguish different Archs. */
	#define GPMI_IS_MX23(x) ((x)->devdata->type == IS_MX23)
	#define GPMI_IS_MX28(x) ((x)->devdata->type == IS_MX28)
	#define GPMI_IS_MX6Q(x) ((x)->devdata->type == IS_MX6Q)
	#define GPMI_IS_MX6SX(x) ((x)->devdata->type == IS_MX6SX)
	#define GPMI_IS_MX7D(x) ((x)->devdata->type == IS_MX7D)

	#define GPMI_IS_MX6(x) (GPMI_IS_MX6Q(x) \|\| GPMI_IS_MX6SX(x) \|\| \
	GPMI_IS_MX7D(x))
	#endif