Google Git
Sign in
coral / linux-mtk / refs/heads/master / . / drivers / misc / mediatek / usb11 / musbfsh_host.c
blob: 4a8fe88cce82487999e1d891391bcc2d73bedd2c [file] [log] [blame] [edit]
/*
* MUSB OTG driver host support
*
* Copyright 2005 Mentor Graphics Corporation
* Copyright (C) 2005-2006 by Texas Instruments
* Copyright (C) 2006-2007 Nokia Corporation
* Copyright (C) 2008-2009 MontaVista Software, Inc. <source@mvista.com>
*
* Copyright 2015 Mediatek Inc.
* Marvin Lin <marvin.lin@mediatek.com>
* Arvin Wang <arvin.wang@mediatek.com>
* Vincent Fan <vincent.fan@mediatek.com>
* Bryant Lu <bryant.lu@mediatek.com>
* Yu-Chang Wang <yu-chang.wang@mediatek.com>
* Macpaul Lin <macpaul.lin@mediatek.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program.
*
* THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/list.h>
#include "musbfsh_core.h"
#include "musbfsh_host.h"
#include "musbfsh_dma.h"
#include "usb.h"
#include "musbfsh_qmu.h"
#include "mtk11_qmu.h"
/* MUSB HOST status 22-mar-2006
*
* - There's still lots of partial code duplication for fault paths, so
* they aren't handled as consistently as they need to be.
*
* - PIO mostly behaved when last tested.
* + including ep0, with all usbtest cases 9, 10
* + usbtest 14 (ep0out) doesn't seem to run at all
* + double buffered OUT/TX endpoints saw stalls(!) with certain usbtest
* configurations, but otherwise double buffering passes basic tests.
* + for 2.6.N, for N > ~10, needs API changes for hcd framework.
*
* - DMA (CPPI) ... partially behaves, not currently recommended
* + about 1/15 the speed of typical EHCI implementations (PCI)
* + RX, all too often reqpkt seems to misbehave after tx
* + TX, no known issues (other than evident silicon issue)
*
* - DMA (Mentor/OMAP) ...has at least toggle update problems
*
* - [23-feb-2009] minimal traffic scheduling to avoid bulk RX packet
* starvation ... nothing yet for TX, interrupt, or bulk.
*
* - Not tested with HNP, but some SRP paths seem to behave.
*
* NOTE 24-August-2006:
*
* - Bulk traffic finally uses both sides of hardware ep1, freeing up an
* extra endpoint for periodic use enabling hub + keybd + mouse. That
* mostly works, except that with "usbnet" it's easy to trigger cases
* with "ping" where RX loses. (a) ping to davinci, even "ping -f",
* fine; but (b) ping _from_ davinci, even "ping -c 1", ICMP RX loses
* although ARP RX wins. (That test was done with a full speed link.)
*/
/*
* NOTE on endpoint usage:
*
* CONTROL transfers all go through ep0. BULK ones go through dedicated IN
* and OUT endpoints ... hardware is dedicated for those "async" queue(s).
* (Yes, bulk _could_ use more of the endpoints than that, and would even
* benefit from it.)
*
* INTERUPPT and ISOCHRONOUS transfers are scheduled to the other endpoints.
* So far that scheduling is both dumb and optimistic: the endpoint will be
* "claimed" until its software queue is no longer refilled. No multiplexing
* of transfers between endpoints, or anything clever.
*/
static u8 dynamic_fifo_total_slot = 15;
int musbfsh_host_alloc_ep_fifo(struct musbfsh *musbfsh, struct musbfsh_qh *qh, u8 is_in)
{
void __iomem *mbase = musbfsh->mregs;
int epnum = qh->hw_ep->epnum;
u16 maxpacket;
u16 request_fifo_sz, fifo_unit_nr;
u16 idx_start = 0;
u8 index, i;
u16 c_off = 0;
u8 c_size = 0;
u16 free_uint = 0;
u8 found = 0;
maxpacket = qh->maxpacket * qh->hb_mult;
if (maxpacket <= 512) {
request_fifo_sz = 512;
fifo_unit_nr = 1;
c_size = 6;
} else if (maxpacket <= 1024) {
request_fifo_sz = 1024;
fifo_unit_nr = 2;
c_size = 7;
} else if (maxpacket <= 2048) {
request_fifo_sz = 2048;
fifo_unit_nr = 4;
c_size = 8;
} else if (maxpacket <= 4096) {
request_fifo_sz = 4096;
fifo_unit_nr = 8;
c_size = 9;
} else {
ERR("should not be here qh maxp:%d maxp:%d\n", qh->maxpacket, maxpacket);
request_fifo_sz = 0;
fifo_unit_nr = 0;
musbfsh_bug();
return -ENOSPC;
}
for (i = 0; i < dynamic_fifo_total_slot; i++) {
if (!(musbfsh_host_dynamic_fifo_usage_msk & (1 << i)))
free_uint++;
else
free_uint = 0;
if (free_uint == fifo_unit_nr) {
found = 1;
break;
}
}
if (found == 0) {
ERR("!enough, dynamic_fifo_usage_msk:0x%x,maxp:%d,req_len:%d,ep%d-%s\n",
musbfsh_host_dynamic_fifo_usage_msk, maxpacket,
request_fifo_sz, epnum, is_in ? "in":"out");
return -1;
}
idx_start = i - (fifo_unit_nr - 1);
c_off = (64 >> 3) + idx_start * (512 >> 3);
for (i = 0; i < fifo_unit_nr; i++)
musbfsh_host_dynamic_fifo_usage_msk |= (1 << (idx_start + i));
index = musbfsh_readb(mbase, MUSBFSH_INDEX);
musbfsh_writeb(musbfsh->mregs, MUSBFSH_INDEX, epnum);
if (is_in) {
musbfsh_write_rxfifosz(mbase, c_size);
musbfsh_write_rxfifoadd(mbase, c_off);
INFO("addr:0x%x, size:0x%x\n", musbfsh_read_rxfifoadd(mbase), musbfsh_read_rxfifosz(mbase));
} else {
musbfsh_write_txfifosz(mbase, c_size);
musbfsh_write_txfifoadd(mbase, c_off);
INFO("addr:0x%x, size:0x%x\n", musbfsh_read_txfifoadd(mbase), musbfsh_read_txfifosz(mbase));
}
musbfsh_writeb(mbase, MUSBFSH_INDEX, index);
INFO("maxp:%d, req_len:%d, dynamic_fifo_usage_msk:0x%x, ep%d-%s, qh->type:%d\n",
maxpacket, request_fifo_sz, musbfsh_host_dynamic_fifo_usage_msk, epnum, is_in ? "in":"out", qh->type);
return 0;
}
void musbfsh_host_free_ep_fifo(struct musbfsh *musbfsh, struct musbfsh_qh *qh, u8 is_in)
{
void __iomem *mbase = musbfsh->mregs;
int epnum = qh->hw_ep->epnum;
u16 maxpacket = qh->maxpacket;
u16 request_fifo_sz, fifo_unit_nr;
u16 idx_start = 0;
u8 index, i;
u16 c_off = 0;
maxpacket = qh->maxpacket * qh->hb_mult;
if (maxpacket <= 512) {
request_fifo_sz = 512;
fifo_unit_nr = 1;
} else if (maxpacket <= 1024) {
request_fifo_sz = 1024;
fifo_unit_nr = 2;
} else if (maxpacket <= 2048) {
request_fifo_sz = 2048;
fifo_unit_nr = 4;
} else if (maxpacket <= 4096) {
request_fifo_sz = 4096;
fifo_unit_nr = 8;
} else {
ERR("should not be here qh maxp:%d maxp:%d\n", qh->maxpacket, maxpacket);
request_fifo_sz = 0;
fifo_unit_nr = 0;
musbfsh_bug();
}
index = musbfsh_readb(mbase, MUSBFSH_INDEX);
musbfsh_writeb(mbase, MUSBFSH_INDEX, epnum);
if (is_in)
c_off = musbfsh_read_rxfifoadd(mbase);
else
c_off = musbfsh_read_txfifoadd(mbase);
idx_start = (c_off - (64 >> 3)) / (512 >> 3);
for (i = 0; i < fifo_unit_nr; i++)
musbfsh_host_dynamic_fifo_usage_msk &= ~(1 << (idx_start + i));
if (is_in) {
musbfsh_write_rxfifosz(mbase, 0);
musbfsh_write_rxfifoadd(mbase, 0);
} else {
musbfsh_write_txfifosz(mbase, 0);
musbfsh_write_txfifoadd(mbase, 0);
}
musbfsh_writeb(mbase, MUSBFSH_INDEX, index);
INFO("maxp:%d, req_len:%d, dynamic_fifo_usage_msk:0x%x, ep%d-%s, qh->type:%d\n",
maxpacket, request_fifo_sz, musbfsh_host_dynamic_fifo_usage_msk, epnum, is_in ? "in":"out", qh->type);
}
static void musbfsh_ep_program(struct musbfsh *musbfsh, u8 epnum,
struct urb *urb, int is_out, u8 *buf,
u32 offset, u32 len);
void musbfsh_bug(void)
{
/* make KE happen */
char *ptr = NULL;
*ptr = 10;
}
/*
* Clear TX fifo. Needed to avoid BABBLE errors.
*/
void musbfsh_h_tx_flush_fifo(struct musbfsh_hw_ep *ep)
{
void __iomem *epio = ep->regs;
u16 csr;
u16 lastcsr = 0;
int retries = 1000;
INFO("%s++\r\n", __func__);
csr = musbfsh_readw(epio, MUSBFSH_TXCSR);
while (csr & MUSBFSH_TXCSR_FIFONOTEMPTY) {
if (csr != lastcsr)
INFO("Host TX FIFONOTEMPTY csr: %02x\n", csr);
lastcsr = csr;
csr &= ~MUSBFSH_TXCSR_TXPKTRDY;
csr |= MUSBFSH_TXCSR_FLUSHFIFO;
musbfsh_writew(epio, MUSBFSH_TXCSR, csr);
csr = musbfsh_readw(epio, MUSBFSH_TXCSR);
if (retries-- < 1) {
WARNING("Could not flush host TX%d fifo: csr: %04x\n",
ep->epnum, csr);
return;
}
mdelay(1);
}
}
static void musbfsh_h_ep0_flush_fifo(struct musbfsh_hw_ep *ep)
{
void __iomem *epio = ep->regs;
u16 csr;
int retries = 5;
INFO("%s++\r\n", __func__);
/* scrub any data left in the fifo */
do {
csr = musbfsh_readw(epio, MUSBFSH_TXCSR);
if (!(csr & (MUSBFSH_CSR0_TXPKTRDY | MUSBFSH_CSR0_RXPKTRDY)))
break;
musbfsh_writew(epio, MUSBFSH_TXCSR, MUSBFSH_CSR0_FLUSHFIFO);
csr = musbfsh_readw(epio, MUSBFSH_TXCSR);
udelay(10);
} while (--retries);
if (!retries)
WARNING("Could not flush host TX%d fifo: csr: %04x\n",
ep->epnum, csr);
/* and reset for the next transfer */
musbfsh_writew(epio, MUSBFSH_TXCSR, 0);
}
/*
* Start transmit. Caller is responsible for locking shared resources.
* musb must be locked.
*/
static inline void musbfsh_h_tx_start(struct musbfsh_hw_ep *ep)
{
u16 txcsr;
INFO("%s++\r\n", __func__);
/* NOTE: no locks here; caller should lock and select EP */
if (ep->epnum) {
txcsr = musbfsh_readw(ep->regs, MUSBFSH_TXCSR);
INFO("txcsr=0x%x for ep%d\n", txcsr, ep->epnum);
txcsr |= MUSBFSH_TXCSR_TXPKTRDY | MUSBFSH_TXCSR_H_WZC_BITS;
musbfsh_writew(ep->regs, MUSBFSH_TXCSR, txcsr);
txcsr = musbfsh_readw(ep->regs, MUSBFSH_TXCSR);
INFO("txcsr=0x%x for ep%d\n", txcsr, ep->epnum);
} else {
txcsr = musbfsh_readw(ep->regs, MUSBFSH_CSR0);
INFO("txcsr=0x%x for ep%d\n", txcsr, ep->epnum);
txcsr = MUSBFSH_CSR0_H_DIS_PING | MUSBFSH_CSR0_H_SETUPPKT | MUSBFSH_CSR0_TXPKTRDY;
musbfsh_writew(ep->regs, MUSBFSH_CSR0, txcsr);
txcsr = musbfsh_readw(ep->regs, MUSBFSH_TXCSR);
INFO("txcsr=0x%x for ep%d\n", txcsr, ep->epnum);
}
}
void musbfsh_ep_set_qh(struct musbfsh_hw_ep *ep, int is_in,
struct musbfsh_qh *qh)
{
if (is_in != 0 || ep->is_shared_fifo)
ep->in_qh = qh;
if (is_in == 0 || ep->is_shared_fifo)
ep->out_qh = qh;
}
struct musbfsh_qh *musbfsh_ep_get_qh(struct musbfsh_hw_ep *ep, int is_in)
{
INFO("%s++, hw_ep%d, is_in=%d\r\n",
__func__, ep->epnum, is_in);
return is_in ? ep->in_qh : ep->out_qh;
}
/*
* Start the URB at the front of an endpoint's queue
* end must be claimed from the caller.
*
* Context: controller locked, irqs blocked
*/
static void musbfsh_start_urb(struct musbfsh *musbfsh, int is_in,
struct musbfsh_qh *qh)
{
u16 frame;
u32 len;
struct urb *urb = next_urb(qh);
void *buf = urb->transfer_buffer;
u32 offset = 0;
struct musbfsh_hw_ep *hw_ep = qh->hw_ep;
unsigned pipe = urb->pipe;
u8 address = usb_pipedevice(pipe);
int epnum = hw_ep->epnum;
void __iomem *mbase = musbfsh->mregs;
INFO("%s++, addr=%d, hw_ep->epnum=%d, urb_ep_addr:0x%x \r\n",
__func__, address, epnum, urb->ep->desc.bEndpointAddress);
/*
* MYDBG("urb:%x, blen:%d, alen:%d, hep:%x, ep:%x\n",
* urb, urb->transfer_buffer_length, urb->actual_length,
* epnum, urb->ep->desc.bEndpointAddress);
*/
/* initialize software qh state */
/* indicate the buffer pointer now. */
qh->offset = 0;
qh->segsize = 0;
/* gather right source of data */
switch (qh->type) {
case USB_ENDPOINT_XFER_CONTROL: /* PIO mode only */
/* control transfers always start with SETUP */
/* setup packet should be sent out of the controller. */
is_in = 0;
musbfsh->ep0_stage = MUSBFSH_EP0_START;
buf = urb->setup_packet; /* contain the request. */
len = 8;
break;
case USB_ENDPOINT_XFER_ISOC:
qh->iso_idx = 0;
qh->frame = 0;
offset = urb->iso_frame_desc[0].offset;
len = urb->iso_frame_desc[0].length;
break;
default:
/* bulk, interrupt */
/* actual_length may be nonzero on retry paths */
/* before the urb, actual_length should be 0. */
buf = urb->transfer_buffer + urb->actual_length;
len = urb->transfer_buffer_length - urb->actual_length;
}
INFO("qh %p urb %p dev%d ep%d %s %s, hw_ep %d, %p/%d\n",
qh, urb, address, qh->epnum, is_in ? "in" : "out",
({ char *s;
switch (qh->type) {
case USB_ENDPOINT_XFER_CONTROL:
s = "-ctl";
break;
case USB_ENDPOINT_XFER_BULK:
s = "-bulk";
break;
default:
s = "-intr";
break;
};
s;
}),
epnum, buf + offset, len);
/* Configure endpoint */
musbfsh_ep_set_qh(hw_ep, is_in, qh);
/* !is_in, because the fourth parameter of this func is is_out */
musbfsh_ep_program(musbfsh, epnum, urb, !is_in, buf, offset, len);
/* transmit may have more work: start it when it is time */
/*
* Rx,has configure OK in the func: musbfsh_ep_program,
* so return directly
*/
if (is_in)
return;
INFO("Start TX%d %s\n", epnum, hw_ep->tx_channel ? "dma" : "pio");
switch (qh->type) {
case USB_ENDPOINT_XFER_ISOC:
case USB_ENDPOINT_XFER_INT:
INFO("check whether there's still time for periodic Tx\n");
frame = musbfsh_readw(mbase, MUSBFSH_FRAME);
/* FIXME this doesn't implement that scheduling policy ...
* or handle framecounter wrapping
*/
if ((urb->transfer_flags & URB_ISO_ASAP)
|| (frame >= urb->start_frame)) {
/* REVISIT the SOF irq handler shouldn't duplicate
* this code; and we don't init urb->start_frame...
*/
qh->frame = 0;
goto start;
} else {
qh->frame = urb->start_frame;
/* enable SOF interrupt so we can count down */
INFO("SOF for %d\n", epnum);
musbfsh_writeb(mbase, MUSBFSH_INTRUSBE, 0xff);
}
break;
default:
start:
INFO("Start TX%d %s\n", epnum, hw_ep->tx_channel ? "dma" : "pio");
if (!hw_ep->tx_channel) {
/* for pio mode, dma mode will send data after the configuration of the dma channel */
musbfsh_h_tx_start(hw_ep);
}
/* else if (is_cppi_enabled() || tusb_dma_omap()) */
/* musb_h_tx_dma_start(hw_ep); */
}
}
/* Context: caller owns controller lock, IRQs are blocked */
static void musbfsh_giveback(struct musbfsh *musbfsh, struct urb *urb,
int status)
__releases(musbfsh->lock) __acquires(musbfsh->lock)
{
INFO("%s++, complete %p %pF (%d), dev%d ep%d%s, %d/%d\n",
__func__, urb, urb->complete, status,
usb_pipedevice(urb->pipe),
usb_pipeendpoint(urb->pipe),
usb_pipein(urb->pipe) ? "in" : "out",
urb->actual_length, urb->transfer_buffer_length);
/*
* MYDBG("urb:%x, blen:%d, alen:%d, ep:%x\n", urb,
* urb->transfer_buffer_length, urb->actual_length,
* urb->ep->desc.bEndpointAddress);
*/
if (is_dma_capable() && usb_pipein(urb->pipe) && usb_pipeendpoint(urb->pipe))
complete(&urb->done);
usb_hcd_unlink_urb_from_ep(musbfsh_to_hcd(musbfsh), urb);
spin_unlock(&musbfsh->lock);
usb_hcd_giveback_urb(musbfsh_to_hcd(musbfsh), urb, status);
spin_lock(&musbfsh->lock);
}
/* For bulk/interrupt endpoints only */
static inline void musbfsh_save_toggle(struct musbfsh_qh *qh, int is_in,
struct urb *urb)
{
struct musbfsh *musbfsh = qh->hw_ep->musbfsh;
u8 epnum = qh->hw_ep->epnum;
int toggle;
INFO("%s++\r\n", __func__);
/*
* FIXME: the current Mentor DMA code seems to have
* problems getting toggle correct.
*/
if (is_in) {
toggle = musbfsh_readl(musbfsh->mregs, MUSBFSH_RXTOG);
INFO("toggle_IN=0x%x\n", toggle);
} else {
toggle = musbfsh_readl(musbfsh->mregs, MUSBFSH_TXTOG);
INFO("toggle_OUT=0x%x\n", toggle);
}
if (toggle & (1 << epnum))
usb_settoggle(urb->dev, qh->epnum, !is_in, 1);
else
usb_settoggle(urb->dev, qh->epnum, !is_in, 0);
}
static inline void musbfsh_set_toggle(struct musbfsh_qh *qh, int is_in,
struct urb *urb)
{
struct musbfsh *musbfsh = qh->hw_ep->musbfsh;
u8 epnum = qh->hw_ep->epnum;
int tog; /* toggle */
INFO("%s++: qh->hw_ep->epnum %d, qh->epnum %d\n",
__func__, qh->hw_ep->epnum,
qh->epnum);
tog = usb_gettoggle(urb->dev, qh->epnum, !is_in);
if (is_in) {
INFO("qh->dev->toggle[IN]=0x%x\n", qh->dev->toggle[!is_in]);
musbfsh_writel(musbfsh->mregs, MUSBFSH_RXTOG,
(((1 << epnum) << 16) | (tog << epnum)));
musbfsh_writel(musbfsh->mregs, MUSBFSH_RXTOG, (tog << epnum));
} else {
INFO("qh->dev->toggle[OUT]=0x%x\n", qh->dev->toggle[!is_in]);
musbfsh_writel(musbfsh->mregs, MUSBFSH_TXTOG,
(((1 << epnum) << 16) | (tog << epnum)));
musbfsh_writel(musbfsh->mregs, MUSBFSH_TXTOG, (tog << epnum));
}
}
/*
* Advance this hardware endpoint's queue, completing the specified URB and
* advancing to either the next URB queued to that qh, or else invalidating
* that qh and advancing to the next qh scheduled after the current one.
*
* Context: caller owns controller lock, IRQs are blocked
*/
void musbfsh_advance_schedule(struct musbfsh *musbfsh, struct urb *urb,
struct musbfsh_hw_ep *hw_ep, int is_in)
{
struct musbfsh_qh *qh;
struct musbfsh_hw_ep *ep;
int ready;
int status;
/* the current qh */
qh = musbfsh_ep_get_qh(hw_ep, is_in);
ep = qh->hw_ep;
ready = qh->is_ready;
INFO("%s++\r\n", __func__);
status = (urb->status == -EINPROGRESS) ? 0 : urb->status;
/* save toggle eagerly, for paranoia */
switch (qh->type) {
case USB_ENDPOINT_XFER_BULK:
case USB_ENDPOINT_XFER_INT:
/* after the urb, should save the toggle for the ep! */
musbfsh_save_toggle(qh, is_in, urb);
break;
case USB_ENDPOINT_XFER_ISOC:
if (status == 0 && urb->error_count)
status = -EXDEV;
break;
}
qh->is_ready = 0;
musbfsh_giveback(musbfsh, urb, status);
if ((is_in && !hw_ep->in_qh)
|| (!is_in && !hw_ep->out_qh)) {
WARNING("QH already freed\n");
return;
}
qh->is_ready = ready;
/* work around from tablet, avoid KE for qh->hep content 0x6b6b6b6b...
* side effect will cause touch memory after free
*/
/* if the urb list is empty, the next qh will be excute. */
#ifdef CONFIG_MTK_MUSBFSH_BIND_DEV_EP
if (list_empty(&qh->hep->urb_list)) {
struct list_head *head;
struct dma_controller *dma = musbfsh->dma_controller;
if (is_in) {
ep->rx_reinit = 1;
if (ep->rx_channel) {
dma->channel_release(ep->rx_channel);
ep->rx_channel = NULL;
}
} else {
ep->tx_reinit = 1;
if (ep->tx_channel) {
dma->channel_release(ep->tx_channel);
ep->tx_channel = NULL;
}
}
/* Clobber old pointers to this qh */
#ifdef CONFIG_MTK_DT_USB_SUPPORT
mark_qh_activity(qh->epnum, ep->epnum, is_in, 1);
#endif
#ifdef CONFIG_MTK_MUSBFSH_QMU_SUPPORT
if (qh->is_use_qmu)
mtk11_disable_q(musbfsh, hw_ep->epnum, is_in);
#endif
if (qh->type == USB_ENDPOINT_XFER_CONTROL) {
musbfsh_ep_set_qh(ep, is_in, NULL);
qh->hep->hcpriv = NULL;
if (qh->mux == 1) {
head = qh->ring.prev;
list_del(&qh->ring);
kfree(qh);
qh = first_qh(head);
}
} else
qh->resubmit = 1;
}
#else
if (list_empty(&qh->hep->urb_list)) {
struct list_head *head;
if (is_in)
ep->rx_reinit = 1;
else
ep->tx_reinit = 1;
/* Clobber old pointers to this qh */
#ifdef CONFIG_MTK_DT_USB_SUPPORT
mark_qh_activity(qh->epnum, ep->epnum, is_in, 1);
#endif
musbfsh_ep_set_qh(ep, is_in, NULL);
qh->hep->hcpriv = NULL;
if (musbfsh_host_dynamic_fifo && qh->type != USB_ENDPOINT_XFER_CONTROL)
musbfsh_host_free_ep_fifo(musbfsh, qh, is_in);
#ifdef CONFIG_MTK_MUSBFSH_QMU_SUPPORT
if (qh->is_use_qmu)
mtk11_disable_q(musbfsh, hw_ep->epnum, is_in);
#endif
switch (qh->type) {
case USB_ENDPOINT_XFER_CONTROL:
case USB_ENDPOINT_XFER_BULK:
/*
* fifo policy for these lists, except that NAKing
* should rotate a qh to the end (for fairness).
*/
if (qh->mux == 1) {
head = qh->ring.prev;
list_del(&qh->ring);
kfree(qh);
qh = first_qh(head);
break;
}
case USB_ENDPOINT_XFER_INT:
case USB_ENDPOINT_XFER_ISOC:
/*
* this is where periodic bandwidth should be
* de-allocated if it's tracked and allocated;
* and where we'd update the schedule tree...
*/
kfree(qh);
qh = NULL;
break;
}
}
#endif
#ifdef CONFIG_MTK_MUSBFSH_BIND_DEV_EP
if (qh != NULL && qh->is_ready && next_urb(qh))
#else
if (qh != NULL && qh->is_ready)
#endif
{
INFO("... next ep%d %cX urb %p\n",
hw_ep->epnum, is_in ? 'R' : 'T', next_urb(qh));
#ifdef CONFIG_MTK_MUSBFSH_QMU_SUPPORT
if (qh->is_use_qmu && !mtk11_host_qmu_concurrent) {
musbfsh_ep_set_qh(hw_ep, is_in, qh);
mtk11_kick_CmdQ(musbfsh, is_in ? 1:0, qh, next_urb(qh));
} else if (!qh->is_use_qmu)
musbfsh_start_urb(musbfsh, is_in, qh);
#else
musbfsh_start_urb(musbfsh, is_in, qh);
#endif
}
}
u16 musbfsh_h_flush_rxfifo(struct musbfsh_hw_ep *hw_ep, u16 csr)
{
/* we don't want fifo to fill itself again;
* ignore dma (various models),
* leave toggle alone (may not have been saved yet)
*/
INFO("%s++\r\n", __func__);
csr |= MUSBFSH_RXCSR_FLUSHFIFO;
csr &= ~(MUSBFSH_RXCSR_H_REQPKT | MUSBFSH_RXCSR_H_AUTOREQ |
MUSBFSH_RXCSR_AUTOCLEAR | MUSBFSH_RXCSR_RXPKTRDY);
/* write 2x to allow double buffering */
musbfsh_writew(hw_ep->regs, MUSBFSH_RXCSR, csr);
musbfsh_writew(hw_ep->regs, MUSBFSH_RXCSR, csr);
/* flush writebuffer */
return musbfsh_readw(hw_ep->regs, MUSBFSH_RXCSR);
}
/*
* PIO RX for a packet (or part of it).
*/
static bool musbfsh_host_packet_rx(struct musbfsh *musbfsh, struct urb *urb,
u8 epnum, u8 iso_err)
{
u16 rx_count;
u8 *buf;
u16 csr;
bool done = false;
u32 length;
int do_flush = 0;
struct musbfsh_hw_ep *hw_ep = musbfsh->endpoints + epnum;
void __iomem *epio = hw_ep->regs;
struct musbfsh_qh *qh = hw_ep->in_qh;
void *buffer = urb->transfer_buffer;
/* musbfsh_ep_select(mbase, epnum); */
rx_count = musbfsh_readw(epio, MUSBFSH_RXCOUNT);
INFO("%s++: real RX%d count %d, buffer %p len %d/%d\n",
__func__, epnum, rx_count, urb->transfer_buffer, qh->offset,
urb->transfer_buffer_length);
/* unload FIFO */
if (usb_pipeisoc(urb->pipe)) {
int status = 0;
struct usb_iso_packet_descriptor *d;
if (iso_err) {
status = -EILSEQ;
urb->error_count++;
}
d = urb->iso_frame_desc + qh->iso_idx;
buf = buffer + d->offset;
length = d->length;
if (rx_count > length) {
if (status == 0) {
status = -EOVERFLOW;
urb->error_count++;
}
WARNING("** OVERFLOW %d into %d\n", rx_count, length);
do_flush = 1;
} else
length = rx_count;
urb->actual_length += length;
d->actual_length = length;
d->status = status;
/* see if we are done */
done = (++qh->iso_idx >= urb->number_of_packets);
} else {
/* non-isoch */
buf = buffer + qh->offset;
length = urb->transfer_buffer_length - qh->offset;
if (rx_count > length) {
if (urb->status == -EINPROGRESS)
urb->status = -EOVERFLOW;
WARNING("** OVERFLOW %d into %d\n", rx_count, length);
do_flush = 1;
} else
length = rx_count;
urb->actual_length += length;
qh->offset += length;
/* see if we are done */
done = (urb->actual_length == urb->transfer_buffer_length)
|| (rx_count < qh->maxpacket)
|| (urb->status != -EINPROGRESS);
if (done && (urb->status == -EINPROGRESS)
&& (urb->transfer_flags & URB_SHORT_NOT_OK)
&& (urb->actual_length < urb->transfer_buffer_length))
urb->status = -EREMOTEIO;
}
musbfsh_read_fifo(hw_ep, length, buf);
csr = musbfsh_readw(epio, MUSBFSH_RXCSR);
csr |= MUSBFSH_RXCSR_H_WZC_BITS;
if (unlikely(do_flush))
musbfsh_h_flush_rxfifo(hw_ep, csr);
else {
/* REVISIT this assumes AUTOCLEAR is never set */
csr &= ~(MUSBFSH_RXCSR_RXPKTRDY | MUSBFSH_RXCSR_H_REQPKT);
if (!done)
csr |= MUSBFSH_RXCSR_H_REQPKT;
musbfsh_writew(epio, MUSBFSH_RXCSR, csr);
}
return done;
}
/* we don't always need to reinit a given side of an endpoint...
* when we do, use tx/rx reinit routine and then construct a new CSR
* to address data toggle, NYET, and DMA or PIO.
*
* it's possible that driver bugs (especially for DMA) or aborting a
* transfer might have left the endpoint busier than it should be.
* the busy/not-empty tests are basically paranoia.
*/
static void
musbfsh_rx_reinit(struct musbfsh *musbfsh, struct musbfsh_qh *qh,
struct musbfsh_hw_ep *ep)
{
u16 csr;
INFO("%s++\r\n", __func__);
/* NOTE: we know the "rx" fifo reinit never triggers for ep0.
* That always uses tx_reinit since ep0 repurposes TX register
* offsets; the initial SETUP packet is also a kind of OUT.
*/
/* if programmed for Tx, put it in RX mode */
if (ep->is_shared_fifo) {
csr = musbfsh_readw(ep->regs, MUSBFSH_TXCSR);
if (csr & MUSBFSH_TXCSR_MODE) {
musbfsh_h_tx_flush_fifo(ep);
csr = musbfsh_readw(ep->regs, MUSBFSH_TXCSR);
musbfsh_writew(ep->regs, MUSBFSH_TXCSR,
csr | MUSBFSH_TXCSR_FRCDATATOG);
}
/*
* Clear the MODE bit (and everything else) to enable Rx.
* NOTE: we mustn't clear the DMAMODE bit before DMAENAB.
*/
if (csr & MUSBFSH_TXCSR_DMAMODE)
musbfsh_writew(ep->regs, MUSBFSH_TXCSR,
MUSBFSH_TXCSR_DMAMODE);
musbfsh_writew(ep->regs, MUSBFSH_TXCSR, 0);
/* scrub all previous state, clearing toggle */
} else {
csr = musbfsh_readw(ep->regs, MUSBFSH_RXCSR);
if (csr & MUSBFSH_RXCSR_RXPKTRDY)
INFO("musbfsh::rx%d, packet/%d ready?\n", ep->epnum,
musbfsh_readw(ep->regs, MUSBFSH_RXCOUNT));
musbfsh_h_flush_rxfifo(ep, 0);
}
/* target addr and (for multipoint) hub addr/port */
if (musbfsh->is_multipoint) {
musbfsh_write_rxfunaddr(musbfsh->mregs, ep->epnum,
qh->addr_reg);
musbfsh_write_rxhubaddr(musbfsh->mregs, ep->epnum,
qh->h_addr_reg);
musbfsh_write_rxhubport(musbfsh->mregs, ep->epnum,
qh->h_port_reg);
} else {
musbfsh_writeb(musbfsh->mregs, MUSBFSH_FADDR, qh->addr_reg);
}
/* protocol/endpoint, interval/NAKlimit, i/o size */
musbfsh_writeb(ep->regs, MUSBFSH_RXTYPE, qh->type_reg);
musbfsh_writeb(ep->regs, MUSBFSH_RXINTERVAL, qh->intv_reg);
musbfsh_writew(ep->regs, MUSBFSH_RXMAXP, qh->maxpacket);
ep->rx_reinit = 0;
}
static bool musbfsh_tx_dma_program(struct dma_controller *dma,
struct musbfsh_hw_ep *hw_ep,
struct musbfsh_qh *qh,
struct urb *urb, u32 offset, u32 len)
{
struct dma_channel *channel = hw_ep->tx_channel;
void __iomem *epio = hw_ep->regs;
u16 pkt_size = qh->maxpacket;
u16 csr;
u8 mode;
INFO("%s++\r\n", __func__);
if (len > channel->max_len)
len = channel->max_len;
csr = musbfsh_readw(epio, MUSBFSH_TXCSR);
if (len > pkt_size) {
INFO("%s: mode 1\r\n", __func__);
mode = 1;
csr |= MUSBFSH_TXCSR_DMAMODE | MUSBFSH_TXCSR_DMAENAB;
csr |= MUSBFSH_TXCSR_AUTOSET;
} else {
INFO("%s: mode 0\r\n", __func__);
mode = 0;
csr &= ~(MUSBFSH_TXCSR_AUTOSET | MUSBFSH_TXCSR_DMAMODE);
csr |= MUSBFSH_TXCSR_DMAENAB; /* against programmer's guide */
}
channel->desired_mode = mode;
INFO("%s: txcsr=0x%x\r\n", __func__, csr);
/* finish the configration for TXCSR register. */
musbfsh_writew(epio, MUSBFSH_TXCSR, csr);
qh->segsize = len;
/*
* Ensure the data reaches to main memory before starting
* DMA transfer
*/
wmb();
if (!dma->channel_program(channel, pkt_size, mode,
urb->transfer_dma + offset, len)) {
/* give up the channel, so other ep can use it */
dma->channel_release(channel);
hw_ep->tx_channel = NULL;
csr = musbfsh_readw(epio, MUSBFSH_TXCSR);
csr &= ~(MUSBFSH_TXCSR_AUTOSET | MUSBFSH_TXCSR_DMAENAB);
musbfsh_writew(epio, MUSBFSH_TXCSR,
csr | MUSBFSH_TXCSR_H_WZC_BITS);
return false;
}
return true;
}
/*
* Program an HDRC endpoint as per the given URB
* Context: irqs blocked, controller lock held
* u8 epnum: the index number, not the real number
* int is_out: so the parameter sent to this func is !is_in.
*/
static void musbfsh_ep_program(struct musbfsh *musbfsh, u8 epnum,
struct urb *urb, int is_out,
u8 *buf, u32 offset, u32 len)
{
struct dma_controller *dma_controller;
struct dma_channel *dma_channel;
void __iomem *mbase = musbfsh->mregs;
struct musbfsh_hw_ep *hw_ep = musbfsh->endpoints + epnum;
void __iomem *epio = hw_ep->regs;
/* the parameter sent to musbfsh_ep_get_qh is is_in */
struct musbfsh_qh *qh = musbfsh_ep_get_qh(hw_ep, !is_out);
u16 packet_sz = qh->maxpacket;
INFO("%s++: %s hw%d urb %p spd%d",
__func__, is_out ? "-->" : "<--",
epnum, urb, urb->dev->speed);
INFO("%s : dev%d ep%d%s h_addr%02x h_port%02x bytes %d\n",
__func__,
qh->addr_reg, qh->epnum, is_out ? "out" : "in",
qh->h_addr_reg, qh->h_port_reg, len);
/* very important, then we can use the register via epio */
musbfsh_ep_select(mbase, epnum);
/* candidate for DMA? */
/*
* wz:for MT65xx, there are not enough dma channels for all of the eps,
* so I think we should add a flag in the hw_ep struct to indicate
* whether it has a dma channel.
* And check it here to set the dma_channel
*/
dma_controller = musbfsh->dma_controller;
/* will check epnum, indicate dma is not used for ep0! */
if (is_dma_capable() && epnum && dma_controller) {
INFO("Using DMA epnum%d\n", epnum);
/* not all eps have dma channel */
dma_channel = is_out ? hw_ep->tx_channel : hw_ep->rx_channel;
/*
* if no dma channel yet,
* will allocate a channel for this ep!
*/
if (!dma_channel) {
/*
* maybe return NULL, if all of the dma channels
* have been used.
*/
dma_channel =
dma_controller->channel_alloc(dma_controller,
hw_ep, is_out);
if (dma_channel) {
INFO("Got a DMA channel for ep%d\n", epnum);
if (is_out)
hw_ep->tx_channel = dma_channel;
else
hw_ep->rx_channel = dma_channel;
} else {
WARNING("DMA channel alloc fail for ep%d\n",
epnum);
}
}
} else {
INFO("Using PIO for ep%d\n", epnum);
dma_channel = NULL;
}
/* make sure we clear DMAEnab, autoSet bits from previous run */
/* OUT/transmit/EP0 or IN/receive? */
if (is_out) {
u16 csr;
u16 int_txe;
u16 load_count;
csr = musbfsh_readw(epio, MUSBFSH_TXCSR);
/* disable interrupt in case we flush */
int_txe = musbfsh_readw(mbase, MUSBFSH_INTRTXE);
musbfsh_writew(mbase, MUSBFSH_INTRTXE, int_txe & ~(1 << epnum));
/* general endpoint setup, not ep0 */
if (epnum) { /* Tx endpoint */
/* flush all old state, set default */
musbfsh_h_tx_flush_fifo(hw_ep);
/*
* We must not clear the DMAMODE bit before or in
* the same cycle with the DMAENAB bit, so we clear
* the latter first...
*/
csr &= ~(MUSBFSH_TXCSR_H_NAKTIMEOUT |
MUSBFSH_TXCSR_AUTOSET |
MUSBFSH_TXCSR_DMAENAB |
MUSBFSH_TXCSR_FRCDATATOG |
MUSBFSH_TXCSR_H_RXSTALL |
MUSBFSH_TXCSR_H_ERROR |
MUSBFSH_TXCSR_TXPKTRDY);
/* wz add to init the toggle */
musbfsh_set_toggle(qh, !is_out, urb);
musbfsh_writew(epio, MUSBFSH_TXCSR, csr);
/* REVISIT may need to clear FLUSHFIFO ... */
csr &= ~MUSBFSH_TXCSR_DMAMODE;
musbfsh_writew(epio, MUSBFSH_TXCSR, csr);
csr = musbfsh_readw(epio, MUSBFSH_TXCSR);
} else {
/* endpoint 0: just flush */
musbfsh_h_ep0_flush_fifo(hw_ep);
}
/* target addr and (for multipoint) hub addr/port */
if (musbfsh->is_multipoint) {
musbfsh_write_txfunaddr(mbase, epnum, qh->addr_reg);
musbfsh_write_txhubaddr(mbase, epnum, qh->h_addr_reg);
musbfsh_write_txhubport(mbase, epnum, qh->h_port_reg);
INFO("set address! h_port_reg 0x%x h_addr_reg 0x%x\n",
qh->h_port_reg, qh->h_addr_reg);
} else {
/* set the address of the device,very important!! */
musbfsh_writeb(mbase, MUSBFSH_FADDR, qh->addr_reg);
INFO("set address! 0x%x\n", qh->addr_reg);
}
/* protocol/endpoint/interval/NAKlimit */
if (epnum) {
/* set the transfer type and endpoint number */
musbfsh_writeb(epio, MUSBFSH_TXTYPE, qh->type_reg);
musbfsh_writew(epio, MUSBFSH_TXMAXP, qh->maxpacket);
musbfsh_writeb(epio, MUSBFSH_TXINTERVAL, qh->intv_reg);
} else { /* ep0 */
musbfsh_writeb(epio, MUSBFSH_NAKLIMIT0, qh->intv_reg);
if (musbfsh->is_multipoint)
musbfsh_writeb(epio, MUSBFSH_TYPE0,
qh->type_reg);
}
load_count = min_t(u32, packet_sz, len);
/* write data to the fifo */
if (dma_channel && musbfsh_tx_dma_program(dma_controller,
hw_ep, qh, urb,
offset, len))
load_count = 0;
if (load_count) { /* dma is not available */
/* PIO to load FIFO */
qh->segsize = load_count;
musbfsh_write_fifo(hw_ep, load_count, buf);
}
/* re-enable interrupt */
/* after load the data to fifo, but not set txpakready */
musbfsh_writew(mbase, MUSBFSH_INTRTXE, int_txe);
/* IN/receive */
} else {
u16 csr;
if (hw_ep->rx_reinit) {
musbfsh_rx_reinit(musbfsh, qh, hw_ep);
/* wz add to init the toggle */
musbfsh_set_toggle(qh, !is_out, urb);
csr = 0;
/* disable NYET for interrupt transfer */
if (qh->type == USB_ENDPOINT_XFER_INT)
csr |= MUSBFSH_RXCSR_DISNYET;
} else { /* bulk IN */
csr = musbfsh_readw(hw_ep->regs, MUSBFSH_RXCSR);
if (csr & (MUSBFSH_RXCSR_RXPKTRDY |
MUSBFSH_RXCSR_DMAENAB |
MUSBFSH_RXCSR_H_REQPKT))
ERR("broken !rx_reinit, ep%d csr %04x\n",
hw_ep->epnum, csr);
/* scrub any stale state, leaving toggle alone */
csr &= MUSBFSH_RXCSR_DISNYET;
}
/* kick things off */
csr |= MUSBFSH_RXCSR_H_REQPKT; /* ask packet from the device */
INFO("RXCSR%d := %04x\n", epnum, csr);
musbfsh_writew(hw_ep->regs, MUSBFSH_RXCSR, csr);
csr = musbfsh_readw(hw_ep->regs, MUSBFSH_RXCSR);
}
}
/*
* Service the default endpoint (ep0) as host.
* Return false until it's time to start the status stage.
*/
static bool musbfsh_h_ep0_continue(struct musbfsh *musbfsh, u16 len,
struct urb *urb)
{
bool more = false;
u8 *fifo_dest = NULL;
u16 fifo_count = 0;
struct musbfsh_hw_ep *hw_ep = musbfsh->control_ep;
struct musbfsh_qh *qh = hw_ep->in_qh;
struct usb_ctrlrequest *request;
INFO("%s++\r\n", __func__);
switch (musbfsh->ep0_stage) {
case MUSBFSH_EP0_IN:
/* actual_length: the data number transferred */
fifo_dest = urb->transfer_buffer + urb->actual_length;
fifo_count = min_t(size_t, len,
urb->transfer_buffer_length -
urb->actual_length);
/* len: the data number in the EP0 fifo */
if (fifo_count < len)
urb->status = -EOVERFLOW;
/* not use dma for ep0 */
musbfsh_read_fifo(hw_ep, fifo_count, fifo_dest);
/* update the actual_length! */
urb->actual_length += fifo_count;
/*
* the in transaction is complete,
* should run to status stage.
*/
if (len < qh->maxpacket) {
/* always terminate on short read; it's
* rarely reported as an error.
more = false;//add by zheng wang
*/
} else if (urb->actual_length < urb->transfer_buffer_length)
more = true;
break;
case MUSBFSH_EP0_START:
request = (struct usb_ctrlrequest *)urb->setup_packet;
if (!request->wLength) {
INFO("start no-DATA\n");
break;
} else if (request->bRequestType & USB_DIR_IN) {
INFO("start IN-DATA\n");
musbfsh->ep0_stage = MUSBFSH_EP0_IN;
more = true;
break; /*wait for next interrupt! */
}
INFO("start OUT-DATA\n");
musbfsh->ep0_stage = MUSBFSH_EP0_OUT;
more = true;
/* no break here, send data right now! */
/* FALLTHROUGH */
case MUSBFSH_EP0_OUT:
fifo_count = min_t(size_t, qh->maxpacket,
urb->transfer_buffer_length -
urb->actual_length);
if (fifo_count) {
fifo_dest =
(u8 *)(urb->transfer_buffer +
urb->actual_length);
INFO("Sending %d byte%s to ep0 fifo %p\n",
fifo_count,
(fifo_count == 1) ? "" : "s",
fifo_dest);
musbfsh_write_fifo(hw_ep, fifo_count, fifo_dest);
urb->actual_length += fifo_count;
more = true;
}
break;
default:
ERR("bogus ep0 stage %d\n", musbfsh->ep0_stage);
break;
}
return more;
}
/*
* Handle default endpoint interrupt as host. Only called in IRQ time
* from musbfsh_interrupt().
*
* called with controller irqlocked
*/
irqreturn_t musbfsh_h_ep0_irq(struct musbfsh *musbfsh)
{
struct urb *urb;
u16 csr, len;
int status = 0;
void __iomem *mbase = musbfsh->mregs;
struct musbfsh_hw_ep *hw_ep = musbfsh->control_ep;
void __iomem *epio = hw_ep->regs;
struct musbfsh_qh *qh = hw_ep->in_qh;
bool complete = false;
irqreturn_t retval = IRQ_NONE;
INFO("%s++\r\n", __func__);
/* ep0 only has one queue, "in" */
urb = next_urb(qh);
musbfsh_ep_select(mbase, 0);
csr = musbfsh_readw(epio, MUSBFSH_CSR0);
len = (csr & MUSBFSH_CSR0_RXPKTRDY)
? musbfsh_readb(epio, MUSBFSH_COUNT0)
: 0;
INFO("<== csr0 %04x, qh %p, count %d, urb %p, stage %d\n",
csr, qh, len, urb, musbfsh->ep0_stage);
/* if we just did status stage, we are done */
if (musbfsh->ep0_stage == MUSBFSH_EP0_STATUS) {
retval = IRQ_HANDLED;
complete = true;
}
/* prepare status */
if (csr & MUSBFSH_CSR0_H_RXSTALL) {
WARNING("STALLING ENDPOINT\n");
status = -EPIPE;
} else if (csr & MUSBFSH_CSR0_H_ERROR) {
WARNING("no response, csr0 %04x\n", csr);
status = -EPROTO;
} else if (csr & MUSBFSH_CSR0_H_NAKTIMEOUT) {
WARNING("control NAK timeout\n");
/* NOTE: this code path would be a good place to PAUSE a
* control transfer, if another one is queued, so that
* ep0 is more likely to stay busy. That's already done
* for bulk RX transfers.
*
* if (qh->ring.next != &musbfsh->control), then
* we have a candidate... NAKing is *NOT* an error
*/
musbfsh_writew(epio, MUSBFSH_CSR0, 0);
retval = IRQ_HANDLED;
}
/* if there is an error in the control transfer, and abort it! */
if (status) {
INFO("aborting\n");
retval = IRQ_HANDLED;
if (urb)
urb->status = status;
complete = true;
/* use the proper sequence to abort the transfer */
if (csr & MUSBFSH_CSR0_H_REQPKT) {
csr &= ~MUSBFSH_CSR0_H_REQPKT;
musbfsh_writew(epio, MUSBFSH_CSR0, csr);
csr &= ~MUSBFSH_CSR0_H_NAKTIMEOUT;
musbfsh_writew(epio, MUSBFSH_CSR0, csr);
} else {
musbfsh_h_ep0_flush_fifo(hw_ep);
}
musbfsh_writeb(epio, MUSBFSH_NAKLIMIT0, 0);
/* clear it */
musbfsh_writew(epio, MUSBFSH_CSR0, 0);
}
if (unlikely(!urb)) {
/* stop endpoint since we have no place for its data, this
* SHOULD NEVER HAPPEN!
*/
ERR("no URB for end 0\n");
musbfsh_h_ep0_flush_fifo(hw_ep);
goto done;
}
if (!complete) { /* not the status stage */
/* call common logic and prepare response */
if (musbfsh_h_ep0_continue(musbfsh, len, urb)) {
/* more packets required */
/*
* wz, I think the following code can be
* run in musbfsh_h_ep0_continue
*/
csr = (musbfsh->ep0_stage == MUSBFSH_EP0_IN)
? MUSBFSH_CSR0_H_REQPKT : MUSBFSH_CSR0_TXPKTRDY;
} else {
/* data transfer complete; perform status phase */
/*
* indicate no data stage,
* so there is no need to set the stage in
* musbfsh_h_ep0_continue
*/
if (usb_pipeout(urb->pipe)
|| !urb->transfer_buffer_length)
csr = MUSBFSH_CSR0_H_STATUSPKT |
MUSBFSH_CSR0_H_REQPKT;
else
csr = MUSBFSH_CSR0_H_STATUSPKT |
MUSBFSH_CSR0_TXPKTRDY;
/* flag status stage */
musbfsh->ep0_stage = MUSBFSH_EP0_STATUS;
INFO("ep0 STATUS, csr %04x\n", csr);
}
musbfsh_writew(epio, MUSBFSH_CSR0, csr);
retval = IRQ_HANDLED;
} else
musbfsh->ep0_stage = MUSBFSH_EP0_IDLE;
/* call completion handler if done */
if (complete) {
/* MYDBG(""); */
musbfsh_advance_schedule(musbfsh, urb, hw_ep, 1);
}
done:
return retval;
}
/* Host side TX (OUT) using Mentor DMA works as follows:
* submit_urb ->
* - if queue was empty, Program Endpoint
* - ... which starts DMA to fifo in mode 1 or 0
*
*DMA Isr (transfer complete) -> TxAvail()
* - Stop DMA (~DmaEnab) (<--- Alert ... currently happens
* only in musb_cleanup_urb)
* - TxPktRdy has to be set in mode 0 or for
* short packets in mode 1.
*/
/* Service a Tx-Available or dma completion irq for the endpoint */
void musbfsh_host_tx(struct musbfsh *musbfsh, u8 epnum) /* real ep num */
{
int pipe;
bool done = false;
u16 tx_csr;
size_t length = 0;
size_t offset = 0;
struct musbfsh_hw_ep *hw_ep = musbfsh->endpoints + epnum;
void __iomem *epio = hw_ep->regs;
struct musbfsh_qh *qh = hw_ep->out_qh;
struct urb *urb = next_urb(qh); /* the current urb been processing */
/* indicate the transfer error, if status=0, there is no error! */
u32 status = 0;
void __iomem *mbase = musbfsh->mregs;
struct dma_channel *dma;
bool transfer_pending = false;
#ifdef CONFIG_MTK_MUSBFSH_QMU_SUPPORT
if (qh && qh->is_use_qmu)
return;
#endif
INFO("%s++, real ep=%d\r\n", __func__, epnum);
musbfsh_ep_select(mbase, epnum);
tx_csr = musbfsh_readw(epio, MUSBFSH_TXCSR);
/* with CPPI, DMA sometimes triggers "extra" irqs */
if (!urb) {
INFO("extra TX%d ready, csr %04x\n", epnum, tx_csr);
return;
}
pipe = urb->pipe;
dma = is_dma_capable() ? hw_ep->tx_channel : NULL;
INFO("OUT/TX%d end, csr %04x%s\n",
epnum, tx_csr, dma ? ", dma" : "pio");
/* check for errors */
if (tx_csr & MUSBFSH_TXCSR_H_RXSTALL) {
/* dma was disabled, fifo flushed */
WARNING("TX end %d stall\n", epnum);
/* stall; record URB status */
status = -EPIPE;
} else if (tx_csr & MUSBFSH_TXCSR_H_ERROR) {
/* (NON-ISO) dma was disabled, fifo flushed */
WARNING("TX 3strikes on ep=%d\n", epnum);
status = -ETIMEDOUT;
} else if (tx_csr & MUSBFSH_TXCSR_H_NAKTIMEOUT) {
WARNING("TX end=%d device not responding\n", epnum);
/* NOTE: this code path would be a good place to PAUSE a
* transfer, if there's some other (nonperiodic) tx urb
* that could use this fifo. (dma complicates it...)
* That's already done for bulk RX transfers.
*
* if (bulk && qh->ring.next != &musbfsh->out_bulk), then
* we have a candidate... NAKing is *NOT* an error
*/
musbfsh_ep_select(mbase, epnum);
musbfsh_writew(epio, MUSBFSH_TXCSR,
MUSBFSH_TXCSR_H_WZC_BITS |
MUSBFSH_TXCSR_TXPKTRDY);
return;
}
/* if status is not 0, have error, will stop to send data. */
if (status) {
if (dma_channel_status(dma) == MUSBFSH_DMA_STATUS_BUSY) {
dma->status = MUSBFSH_DMA_STATUS_CORE_ABORT;
(void)musbfsh->dma_controller->channel_abort(dma);
}
/* do the proper sequence to abort the transfer in the
* usb core; the dma engine should already be stopped.
*/
musbfsh_h_tx_flush_fifo(hw_ep);
tx_csr &= ~(MUSBFSH_TXCSR_AUTOSET |
MUSBFSH_TXCSR_DMAENAB |
MUSBFSH_TXCSR_H_ERROR |
MUSBFSH_TXCSR_H_RXSTALL |
MUSBFSH_TXCSR_H_NAKTIMEOUT);
musbfsh_ep_select(mbase, epnum);
musbfsh_writew(epio, MUSBFSH_TXCSR, tx_csr);
/* REVISIT may need to clear FLUSHFIFO ... */
musbfsh_writew(epio, MUSBFSH_TXCSR, tx_csr);
musbfsh_writeb(epio, MUSBFSH_TXINTERVAL, 0);
done = true;
}
/* second cppi case */
if (dma_channel_status(dma) == MUSBFSH_DMA_STATUS_BUSY) {
INFO("extra TX%d ready, csr %04x\n", epnum, tx_csr);
return;
}
if (is_dma_capable() && dma && !status) {
/*
* DMA has completed. But if we're using DMA mode 1 (multi
* packet DMA), we need a terminal TXPKTRDY interrupt before
* we can consider this transfer completed, lest we trash
* its last packet when writing the next URB's data. So we
* switch back to mode 0 to get that interrupt; we'll come
* back here once it happens.
*/
if (tx_csr & MUSBFSH_TXCSR_DMAMODE) {
/*
* We shouldn't clear DMAMODE with DMAENAB set; so
* clear them in a safe order. That should be OK
* once TXPKTRDY has been set (and I've never seen
* it being 0 at this moment -- DMA interrupt latency
* is significant) but if it hasn't been then we have
* no choice but to stop being polite and ignore the
* programmer's guide... :-)
*
* Note that we must write TXCSR with TXPKTRDY cleared
* in order not to re-trigger the packet send (this bit
* can't be cleared by CPU), and there's another caveat:
* TXPKTRDY may be set shortly and then cleared in the
* double-buffered FIFO mode, so we do an extra TXCSR
* read for debouncing...
*/
tx_csr &= musbfsh_readw(epio, MUSBFSH_TXCSR);
if (tx_csr & MUSBFSH_TXCSR_TXPKTRDY) {
tx_csr &= ~(MUSBFSH_TXCSR_DMAENAB |
MUSBFSH_TXCSR_TXPKTRDY);
musbfsh_writew(epio, MUSBFSH_TXCSR,
tx_csr |
MUSBFSH_TXCSR_H_WZC_BITS);
}
tx_csr &= ~(MUSBFSH_TXCSR_DMAMODE |
MUSBFSH_TXCSR_TXPKTRDY);
musbfsh_writew(epio, MUSBFSH_TXCSR,
tx_csr | MUSBFSH_TXCSR_H_WZC_BITS);
/*
* There is no guarantee that we'll get an interrupt
* after clearing DMAMODE as we might have done this
* too late (after TXPKTRDY was cleared by controller).
* Re-read TXCSR as we have spoiled its previous value.
*/
tx_csr = musbfsh_readw(epio, MUSBFSH_TXCSR);
}
/*
* We may get here from a DMA completion or TXPKTRDY interrupt.
* In any case, we must check the FIFO status here and bail out
* only if the FIFO still has data -- that should prevent the
* "missed" TXPKTRDY interrupts and deal with double-buffered
* FIFO mode too...
*/
if (tx_csr &
(MUSBFSH_TXCSR_FIFONOTEMPTY | MUSBFSH_TXCSR_TXPKTRDY)) {
INFO("DMA complete but Data still in FIFO, CSR %04x\n",
tx_csr);
return;
}
}
if (!status || dma || usb_pipeisoc(pipe)) {
if (dma)
length = dma->actual_len;
else
length = qh->segsize;
qh->offset += length;
if (usb_pipeisoc(pipe)) {
struct usb_iso_packet_descriptor *d;
d = urb->iso_frame_desc + qh->iso_idx;
d->actual_length = length;
d->status = status;
if (++qh->iso_idx >= urb->number_of_packets) {
done = true;
} else {
d++;
offset = d->offset;
length = d->length;
}
/* } else if (dma) { */
} else if (dma && urb->transfer_buffer_length == qh->offset) {
done = true;
} else {
/* see if we need to send more data, or ZLP */
/* sent a short packet */
if (qh->segsize < qh->maxpacket)
done = true;
else if (qh->offset == urb->transfer_buffer_length
&& !(urb->transfer_flags & URB_ZERO_PACKET))
done = true;
if (!done) {
offset = qh->offset;
length = urb->transfer_buffer_length - offset;
transfer_pending = true;
}
}
}
/* urb->status != -EINPROGRESS means request has been faulted,
* so we must abort this transfer after cleanup
*/
if (urb->status != -EINPROGRESS) {
done = true;
if (status == 0)
status = urb->status;
}
if (done) {
/* set status */
urb->status = status;
urb->actual_length = qh->offset;
musbfsh_advance_schedule(musbfsh, urb, hw_ep, USB_DIR_OUT);
return;
} else if (transfer_pending && dma) {
if (musbfsh_tx_dma_program(musbfsh->dma_controller,
hw_ep, qh, urb, offset, length))
return;
} else if (tx_csr & MUSBFSH_TXCSR_DMAENAB) {
WARNING("not complete, but DMA enabled?\n");
return;
}
/*
* PIO: start next packet in this URB.
*
* REVISIT: some docs say that when hw_ep->tx_double_buffered,
* (and presumably, FIFO is not half-full) we should write *two*
* packets before updating TXCSR; other docs disagree...
*/
if (length > qh->maxpacket)
length = qh->maxpacket;
/* Unmap the buffer so that CPU can use it */
usb_hcd_unmap_urb_for_dma(musbfsh_to_hcd(musbfsh), urb);
musbfsh_write_fifo(hw_ep, length, urb->transfer_buffer + offset);
qh->segsize = length;
musbfsh_ep_select(mbase, epnum);
musbfsh_writew(epio, MUSBFSH_TXCSR, MUSBFSH_TXCSR_H_WZC_BITS |
MUSBFSH_TXCSR_TXPKTRDY);
}
/* Host side RX (IN) using Mentor DMA works as follows:
* submit_urb ->
* - if queue was empty, ProgramEndpoint
* - first IN token is sent out (by setting ReqPkt)
*LinuxIsr -> RxReady()
* /\ => first packet is received
* | - Set in mode 0 (DmaEnab, ~ReqPkt)
* | -> DMA Isr (transfer complete) -> RxReady()
* | - Ack receive (~RxPktRdy), turn off DMA (~DmaEnab)
* | - if urb not complete, send next IN token (ReqPkt)
* | | else complete urb.
* | |
*---------------------------
*
* Nuances of mode 1:
* For short packets, no ack (+RxPktRdy) is sent automatically
* (even if AutoClear is ON)
* For full packets, ack (~RxPktRdy) and next IN token (+ReqPkt) is sent
* automatically => major problem, as collecting the next packet becomes
* difficult. Hence mode 1 is not used.
*
* REVISIT
* All we care about at this driver level is that
* (a) all URBs terminate with REQPKT cleared and fifo(s) empty;
* (b) termination conditions are: short RX, or buffer full;
* (c) fault modes include
* - iff URB_SHORT_NOT_OK, short RX status is -EREMOTEIO.
* (and that endpoint's dma queue stops immediately)
* - overflow (full, PLUS more bytes in the terminal packet)
*
* So for example, usb-storage sets URB_SHORT_NOT_OK, and would
* thus be a great candidate for using mode 1 ... for all but the
* last packet of one URB's transfer.
*/
/* Schedule next QH from musbfsh->in_bulk and move the current qh to
* the end; avoids starvation for other endpoints.
*/
static void musbfsh_bulk_rx_nak_timeout(struct musbfsh *musbfsh,
struct musbfsh_hw_ep *ep)
{
struct dma_channel *dma;
struct urb *urb;
void __iomem *mbase = musbfsh->mregs;
void __iomem *epio = ep->regs;
struct musbfsh_qh *cur_qh, *next_qh;
u16 rx_csr;
INFO("musbfsh_bulk_rx_nak_timeout++\r\n");
musbfsh_ep_select(mbase, ep->epnum);
dma = is_dma_capable() ? ep->rx_channel : NULL;
/* clear nak timeout bit */
rx_csr = musbfsh_readw(epio, MUSBFSH_RXCSR);
rx_csr |= MUSBFSH_RXCSR_H_WZC_BITS;
rx_csr &= ~MUSBFSH_RXCSR_DATAERROR;
musbfsh_writew(epio, MUSBFSH_RXCSR, rx_csr);
cur_qh = first_qh(&musbfsh->in_bulk);
if (cur_qh) {
urb = next_urb(cur_qh);
if (dma_channel_status(dma) == MUSBFSH_DMA_STATUS_BUSY) {
dma->status = MUSBFSH_DMA_STATUS_CORE_ABORT;
musbfsh->dma_controller->channel_abort(dma);
urb->actual_length += dma->actual_len;
dma->actual_len = 0L;
}
musbfsh_save_toggle(cur_qh, 1, urb);
/* move cur_qh to end of queue */
list_move_tail(&cur_qh->ring, &musbfsh->in_bulk);
/* get the next qh from musbfsh->in_bulk */
next_qh = first_qh(&musbfsh->in_bulk);
/* set rx_reinit and schedule the next qh */
ep->rx_reinit = 1;
/* MYDBG("musbfsh_start_urb go\n"); */
musbfsh_start_urb(musbfsh, 1, next_qh);
}
}
/*
* Service an RX interrupt for the given IN endpoint; docs cover bulk, iso,
* and high-bandwidth IN transfer cases.
*/
void musbfsh_host_rx(struct musbfsh *musbfsh, u8 epnum)
{
struct urb *urb;
struct musbfsh_hw_ep *hw_ep = musbfsh->endpoints + epnum;
void __iomem *epio = hw_ep->regs;
struct musbfsh_qh *qh = hw_ep->in_qh;
size_t xfer_len;
void __iomem *mbase = musbfsh->mregs;
int pipe;
u16 rx_csr, val;
bool done = false;
u32 status;
struct dma_channel *dma;
bool iso_err = false;
#ifdef CONFIG_MTK_MUSBFSH_QMU_SUPPORT
if (qh && qh->is_use_qmu)
return;
#endif
INFO("musbfsh_host_rx++,real ep=%d\r\n", epnum);
musbfsh_ep_select(mbase, epnum);
urb = next_urb(qh); /* current urb */
dma = is_dma_capable() ? hw_ep->rx_channel : NULL;
if (dma && (dma->status == MUSBFSH_DMA_STATUS_BUSY)) {
INFO("not Dma interrupt %s, @Line %d\n", __func__, __LINE__);
return;
}
status = 0;
xfer_len = 0;
rx_csr = musbfsh_readw(epio, MUSBFSH_RXCSR);
val = rx_csr;
if (unlikely(!urb)) {
/* REVISIT -- THIS SHOULD NEVER HAPPEN ... but, at least
* usbtest #11 (unlinks) triggers it regularly, sometimes
* with fifo full. (Only with DMA??)
*/
WARNING("BOGUS RX%d ready, csr %04x, count %d\n", epnum, val,
musbfsh_readw(epio, MUSBFSH_RXCOUNT));
musbfsh_h_flush_rxfifo(hw_ep, 0);
return;
}
pipe = urb->pipe;
INFO("<==real hw %d rxcsr %04x, urb actual %d (+dma %zu)\n",
epnum, rx_csr, urb->actual_length, dma ? dma->actual_len : 0);
/* check for errors, concurrent stall & unlink is not really
* handled yet!
*/
if (rx_csr & MUSBFSH_RXCSR_H_RXSTALL) {
WARNING("RX end %d STALL\n", epnum);
rx_csr &= ~MUSBFSH_RXCSR_H_RXSTALL;
musbfsh_writew(epio, MUSBFSH_RXCSR, rx_csr);
/* stall; record URB status */
status = -EPIPE;
} else if (rx_csr & MUSBFSH_RXCSR_H_ERROR) {
WARNING("end %d RX proto error\n", epnum);
status = -EPROTO;
musbfsh_writeb(epio, MUSBFSH_RXINTERVAL, 0);
} else if (rx_csr & MUSBFSH_RXCSR_DATAERROR) {
if (qh->type != USB_ENDPOINT_XFER_ISOC) {
INFO("RX end %d NAK timeout\n", epnum);
/* removed due to too many logs */
/* NOTE: NAKing is *NOT* an error, so we want to
* continue. Except ... if there's a request for
* another QH, use that instead of starving it.
*
* Devices like Ethernet and serial adapters keep
* reads posted at all times, which will starve
* other devices without this logic.
*/
if (usb_pipebulk(urb->pipe)
&& qh->mux == 1 && !list_is_singular(&musbfsh->in_bulk)) {
musbfsh_bulk_rx_nak_timeout(musbfsh, hw_ep);
return;
}
musbfsh_ep_select(mbase, epnum);
rx_csr |= MUSBFSH_RXCSR_H_WZC_BITS;
rx_csr &= ~MUSBFSH_RXCSR_DATAERROR;
musbfsh_writew(epio, MUSBFSH_RXCSR, rx_csr);
goto finish;
} else {
INFO("RX end %d ISO data error\n", epnum);
/* packet error reported later */
iso_err = true;
}
} else if (rx_csr & MUSBFSH_RXCSR_INCOMPRX) {
WARNING("end %d high bandwidth incomplete ISO packet RX\n",
epnum);
status = -EPROTO;
}
/* faults abort the transfer */
if (status) {
/* clean up dma and collect transfer count */
if (dma_channel_status(dma) == MUSBFSH_DMA_STATUS_BUSY) {
dma->status = MUSBFSH_DMA_STATUS_CORE_ABORT;
(void)musbfsh->dma_controller->channel_abort(dma);
xfer_len = dma->actual_len;
dma->actual_len = 0L;
}
musbfsh_h_flush_rxfifo(hw_ep, 0);
musbfsh_writeb(epio, MUSBFSH_RXINTERVAL, 0);
#ifdef CONFIG_MTK_DT_USB_SUPPORT
if (!musbfsh_connect_flag) {
MYDBG("err(%d) after disc\n", status);
return;
}
#endif
done = true;
goto finish;
}
if (unlikely(dma_channel_status(dma) == MUSBFSH_DMA_STATUS_BUSY)) {
/* SHOULD NEVER HAPPEN ... but at least DaVinci has done it */
ERR("RX%d dma busy, csr %04x\n", epnum, rx_csr);
goto finish;
}
/* thorough shutdown for now ... given more precise fault handling
* and better queueing support, we might keep a DMA pipeline going
* while processing this irq for earlier completions.
*/
/* FIXME this is _way_ too much in-line logic for Mentor DMA */
/* here rx_csr & MUSBFSH_RXCSR_DMAENAB is very very important! */
if (dma && (rx_csr & MUSBFSH_RXCSR_DMAENAB)) {
xfer_len = dma->actual_len;
/* These should be clear! */
val &= ~(MUSBFSH_RXCSR_DMAENAB |
MUSBFSH_RXCSR_H_AUTOREQ |
MUSBFSH_RXCSR_AUTOCLEAR |
MUSBFSH_RXCSR_RXPKTRDY);
musbfsh_writew(hw_ep->regs, MUSBFSH_RXCSR, val);
if (usb_pipeisoc(pipe)) {
struct usb_iso_packet_descriptor *d;
d = urb->iso_frame_desc + qh->iso_idx;
d->actual_length = xfer_len;
/* even if there was an error, we did the dma
* for iso_frame_desc->length
*/
if (d->status != -EILSEQ && d->status != -EOVERFLOW)
d->status = 0;
if (++qh->iso_idx >= urb->number_of_packets)
done = true;
else
done = false;
} else
done = (urb->actual_length + xfer_len >=
urb->transfer_buffer_length ||
dma->actual_len < qh->maxpacket);
dma->actual_len = 0L;
/* send IN token for next packet, without AUTOREQ */
if (!done) {
val |= MUSBFSH_RXCSR_H_REQPKT;
musbfsh_writew(epio, MUSBFSH_RXCSR,
MUSBFSH_RXCSR_H_WZC_BITS | val);
}
INFO("ep %d dma %s, rxcsr %04x, rxcount %d\n", epnum,
done ? "off" : "reset",
musbfsh_readw(epio, MUSBFSH_RXCSR),
musbfsh_readw(epio, MUSBFSH_RXCOUNT));
} else if (urb->status == -EINPROGRESS) {
/* if no errors, be sure a packet is ready for unloading */
if (unlikely(!(rx_csr & MUSBFSH_RXCSR_RXPKTRDY))) {
status = -EPROTO;
ERR("Rx interrupt with no errors or packet!\n");
/* FIXME this is another "SHOULD NEVER HAPPEN" */
/* SCRUB (RX) */
/* do the proper sequence to abort the transfer */
musbfsh_ep_select(mbase, epnum);
val &= ~MUSBFSH_RXCSR_H_REQPKT;
musbfsh_writew(epio, MUSBFSH_RXCSR, val);
goto finish;
}
/* we are expecting IN packets */
if (dma) {
struct dma_controller *c;
u16 rx_count;
int ret, length;
dma_addr_t buf;
rx_count = musbfsh_readw(epio, MUSBFSH_RXCOUNT);
INFO("RX%d count %d, buffer 0x%x len %d/%d\n",
epnum, rx_count,
(unsigned int)urb->transfer_dma
+ urb->actual_length, qh->offset,
urb->transfer_buffer_length);
c = musbfsh->dma_controller;
if (usb_pipeisoc(pipe)) {
int d_status = 0;
struct usb_iso_packet_descriptor *d;
d = urb->iso_frame_desc + qh->iso_idx;
if (iso_err) {
d_status = -EILSEQ;
urb->error_count++;
}
if (rx_count > d->length) {
if (d_status == 0) {
d_status = -EOVERFLOW;
urb->error_count++;
}
INFO("** OVERFLOW %d into %d\n", rx_count, d->length);
length = d->length;
} else
length = rx_count;
d->status = d_status;
buf = urb->transfer_dma + d->offset;
} else {
length = rx_count;
buf = urb->transfer_dma + urb->actual_length;
}
dma->desired_mode = 0;
#ifdef USE_MODE1
/* because of the issue below, mode 1 will
* only rarely behave with correct semantics.
*/
if ((urb->transfer_flags & URB_SHORT_NOT_OK) &&
(urb->transfer_buffer_length - urb->actual_length) >
qh->maxpacket)
dma->desired_mode = 1;
if (rx_count < hw_ep->max_packet_sz_rx) {
length = rx_count;
dma->desired_mode = 0;
} else {
length = urb->transfer_buffer_length;
}
#endif
/*
* Disadvantage of using mode 1:
* It's basically usable only for mass storage
* class; essentially all other protocols also
* terminate transfers on short packets.
*
* Details:
* An extra IN token is sent at the end of the
* transfer (due to AUTOREQ). If you try to use
* mode 1 for (transfer_buffer_length - 512),
* and try to use the extra IN token to grab the
* last packet using mode 0, then the problem is
* that you cannot be sure when the device will
* send the last packet and RxPktRdy set.
* Sometimes the packet is recd too soon such that
* it gets lost when RxCSR is re-set at the end of
* the mode 1 transfer, while sometimes it is recd
* just a little late so that if you try to
* configure for mode 0 soon after the mode 1
* transfer is completed, you will find rxcount 0.
*
* Okay, so you might think why not
* wait for an interrupt when the pkt is recd.
* Well, you won't get any!
*/
val = musbfsh_readw(epio, MUSBFSH_RXCSR);
val &= ~MUSBFSH_RXCSR_H_REQPKT;
if (dma->desired_mode == 0)
val &= ~MUSBFSH_RXCSR_H_AUTOREQ;
else
val |= MUSBFSH_RXCSR_H_AUTOREQ;
val |= MUSBFSH_RXCSR_DMAENAB;
musbfsh_writew(epio, MUSBFSH_RXCSR,
MUSBFSH_RXCSR_H_WZC_BITS | val);
/* REVISIT if when actual_length != 0,
* transfer_buffer_length needs to be
* adjusted first...
*/
/*
* dma is a dma channel, which is already allocated for
* the Rx EP in the func:musbfsh_ep_program
*/
ret = c->channel_program(dma, qh->maxpacket,
dma->desired_mode, buf,
length);
if (!ret) {
c->channel_release(dma);
hw_ep->rx_channel = NULL;
dma = NULL;
/* REVISIT reset CSR */
}
}
if (!dma) {
/* Unmap the buffer so that CPU can use it */
usb_hcd_unmap_urb_for_dma(musbfsh_to_hcd(musbfsh), urb);
done = musbfsh_host_packet_rx(musbfsh, urb, epnum, iso_err);
INFO("read %spacket\n", done ? "last " : "");
}
}
finish:
urb->actual_length += xfer_len;
qh->offset += xfer_len;
if (done) {
if (urb->status == -EINPROGRESS)
urb->status = status;
musbfsh_advance_schedule(musbfsh, urb, hw_ep, USB_DIR_IN);
}
}
/* schedule nodes correspond to peripheral endpoints, like an OHCI QH.
* the software schedule associates multiple such nodes with a given
* host side hardware endpoint + direction; scheduling may activate
* that hardware endpoint.
*/
static int musbfsh_schedule(struct musbfsh *musbfsh, struct musbfsh_qh *qh,
int is_in)
{
int idle;
int epnum, hw_end = 0;
struct musbfsh_hw_ep *hw_ep = NULL;
struct list_head *head = NULL;
INFO("%s++, qh->epnum=%d, is_in=%d\r\n",
__func__, qh->epnum, (unsigned int)is_in);
/* use fixed hardware for control and bulk */
if (qh->type == USB_ENDPOINT_XFER_CONTROL) {
head = &musbfsh->control;
hw_ep = musbfsh->control_ep;
goto success;
}
#ifdef MUSBFSH_QMU_LIMIT_SUPPORT
if (mtk11_isoc_ep_gpd_count
&& qh->is_use_qmu) {
for (epnum = 1, hw_ep = musbfsh->endpoints + 1;
epnum <= MAX_QMU_EP; epnum++, hw_ep++) {
/* int diff; */
if (musbfsh_ep_get_qh(hw_ep, is_in) != NULL)
continue;
hw_end = epnum;
hw_ep = musbfsh->endpoints + hw_end; /* got the right ep */
break;
}
if (hw_end) {
idle = 1;
qh->mux = 0;
goto success;
}
}
qh->is_use_qmu = 0;
for (epnum = (MAX_QMU_EP + 1), hw_ep = musbfsh->endpoints + (MAX_QMU_EP + 1);
epnum < musbfsh->nr_endpoints; epnum++, hw_ep++) {
if (musbfsh_ep_get_qh(hw_ep, is_in) != NULL)
continue;
hw_end = epnum;
hw_ep = musbfsh->endpoints + hw_end; /* got the right ep */
break;
}
if (hw_end) {
idle = 1;
qh->mux = 0;
goto success;
}
if (!hw_end) {
for (epnum = 1, hw_ep = musbfsh->endpoints + 1;
epnum <= MAX_QMU_EP; epnum++, hw_ep++) {
/* int diff; */
if (musbfsh_ep_get_qh(hw_ep, is_in) != NULL)
continue;
hw_end = epnum;
hw_ep = musbfsh->endpoints + hw_end; /* got the right ep */
break;
}
}
if (hw_end) {
idle = 1;
qh->mux = 0;
goto success;
} else {
WARNING("EP OVERFLOW.\n");
return -ENOSPC;
}
#endif
#ifdef CONFIG_MTK_MUSBFSH_QMU_SUPPORT
if (mtk11_isoc_ep_gpd_count
&& qh->type == USB_ENDPOINT_XFER_ISOC) {
for (epnum = mtk11_isoc_ep_start_idx, hw_ep = musbfsh->endpoints + mtk11_isoc_ep_start_idx;
epnum < musbfsh->nr_endpoints; epnum++, hw_ep++) {
/* int diff; */
if (musbfsh_ep_get_qh(hw_ep, is_in) != NULL)
continue;
hw_end = epnum;
hw_ep = musbfsh->endpoints + hw_end; /* got the right ep */
break;
}
if (hw_end) {
idle = 1;
qh->mux = 0;
goto success;
}
}
#endif
/* else, periodic transfers get muxed to other endpoints */
/*
* We know this qh hasn't been scheduled, so all we need to do
* is choose which hardware endpoint to put it on ...
*
* REVISIT what we really want here is a regular schedule tree
* like e.g. OHCI uses.
*/
for (epnum = 1, hw_ep = musbfsh->endpoints + 1;
epnum < musbfsh->nr_endpoints; epnum++, hw_ep++) {
if (musbfsh_ep_get_qh(hw_ep, is_in) != NULL)
continue;
#ifdef CONFIG_MTK_MUSBFSH_QMU_SUPPORT
if (mtk11_isoc_ep_gpd_count && (epnum >= mtk11_isoc_ep_start_idx)) {
epnum = musbfsh->nr_endpoints;
continue;
}
#endif
hw_end = epnum;
hw_ep = musbfsh->endpoints + hw_end; /* got the right ep */
break;
}
#ifdef CONFIG_MTK_MUSBFSH_QMU_SUPPORT
/* grab isoc ep if no other ep is available */
if (mtk11_isoc_ep_gpd_count &&
!hw_end &&
qh->type != USB_ENDPOINT_XFER_ISOC) {
for (epnum = mtk11_isoc_ep_start_idx, hw_ep = musbfsh->endpoints + mtk11_isoc_ep_start_idx;
epnum < musbfsh->nr_endpoints; epnum++, hw_ep++) {
/* int diff; */
if (musbfsh_ep_get_qh(hw_ep, is_in) != NULL)
continue;
hw_end = epnum;
hw_ep = musbfsh->endpoints + hw_end; /* got the right ep */
break;
}
}
#endif
if (!hw_end)
return -ENOSPC;
idle = 1;
qh->mux = 0;
success:
if (head) {
#ifdef CONFIG_MTK_DT_USB_SUPPORT
MYDBG("head!=NULL\n");
#endif
idle = list_empty(head);
list_add_tail(&qh->ring, head);
qh->mux = 1;
}
qh->hw_ep = hw_ep;
qh->hep->hcpriv = qh;
if (musbfsh_host_dynamic_fifo && qh->type != USB_ENDPOINT_XFER_CONTROL) {
int ret;
/* take this after qh->hw_ep is set */
ret = musbfsh_host_alloc_ep_fifo(musbfsh, qh, is_in);
if (ret) {
qh->hw_ep = NULL;
qh->hep->hcpriv = NULL;
WARNING("NOT ENOUGH FIFO\n");
return -ENOSPC;
}
}
hw_ep->type = qh->type;
/* the new urb added is the first urb now, excute it! */
if (idle) {
#ifdef CONFIG_MTK_DT_USB_SUPPORT
mark_qh_activity(qh->epnum, hw_ep->epnum, is_in, 0);
#endif
/* downgrade to non-qmu if no specific ep grabbed whenmtk11_ isoc_ep_gpd_count is set*/
#ifdef CONFIG_MTK_MUSBFSH_QMU_SUPPORT
#ifdef MUSBFSH_QMU_LIMIT_SUPPORT
if (mtk11_isoc_ep_gpd_count &&
qh->is_use_qmu &&
hw_end <= MAX_QMU_EP)
qh->is_use_qmu = 1;
#else
if (mtk11_isoc_ep_gpd_count &&
qh->type == USB_ENDPOINT_XFER_ISOC &&
hw_end < mtk11_isoc_ep_start_idx)
qh->is_use_qmu = 0;
#endif
if (qh->is_use_qmu) {
musbfsh_ep_set_qh(hw_ep, is_in, qh);
mtk11_kick_CmdQ(musbfsh, is_in ? 1:0, qh, next_urb(qh));
} else
musbfsh_start_urb(musbfsh, is_in, qh);
#else
musbfsh_start_urb(musbfsh, is_in, qh);
#endif
}
return 0;
}
static int musbfsh_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
gfp_t mem_flags)
{
unsigned long flags;
struct musbfsh *musbfsh = hcd_to_musbfsh(hcd);
struct usb_host_endpoint *hep = urb->ep;
struct musbfsh_qh *qh;
struct usb_endpoint_descriptor *epd = &hep->desc;
int ret;
unsigned type_reg;
unsigned interval;
INFO("musbfsh_urb_enqueue++:urb addr=0x%p\r\n", urb);
/*
* MYDBG("urb:%x, blen:%d, alen:%d, ep:%x\n",
* urb, urb->transfer_buffer_length, urb->actual_length,
* epd->bEndpointAddress);
*/
/*
* workaround for DMA issue,
* to make usb core jump over unmap_urb_for_dma
* in usb_hcd_giveback_urb for control message
*/
if (usb_endpoint_num(epd) == 0)
urb->transfer_flags &= ~URB_DMA_MAP_SINGLE;
spin_lock_irqsave(&musbfsh->lock, flags);
init_completion(&urb->done);
/* add the urb to the ep, return 0 for no error. */
ret = usb_hcd_link_urb_to_ep(hcd, urb);
qh = ret ? NULL : hep->hcpriv;
if (qh)
urb->hcpriv = qh;
#ifdef CONFIG_MTK_MUSBFSH_BIND_DEV_EP
if (qh && (ret == 0) && qh->resubmit) {
qh->resubmit = 0;
#ifdef CONFIG_MTK_MUSBFSH_QMU_SUPPORT
if (mtk11_host_qmu_concurrent && qh && qh->is_use_qmu && (ret == 0)) {
mtk11_kick_CmdQ(musbfsh, (epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) ? 1:0, qh, urb);
spin_unlock_irqrestore(&musbfsh->lock, flags);
return ret;
}
#endif
musbfsh_start_urb(musbfsh, (epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) ? 1:0, qh);
spin_unlock_irqrestore(&musbfsh->lock, flags);
return ret;
}
#endif
/* DMA mapping was already done, if needed, and this urb is on
* hep->urb_list now ... so we're done, unless hep wasn't yet
* scheduled onto a live qh.
*
* REVISIT best to keep hep->hcpriv valid until the endpoint gets
* disabled, testing for empty qh->ring and avoiding qh setup costs
* except for the first urb queued after a config change.
*/
#ifdef CONFIG_MTK_MUSBFSH_QMU_SUPPORT
if (mtk11_host_qmu_concurrent && qh && qh->is_use_qmu && (ret == 0)) {
mtk11_kick_CmdQ(musbfsh, (epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) ? 1:0, qh, urb);
spin_unlock_irqrestore(&musbfsh->lock, flags);
return ret;
}
#endif
if (qh || ret) {
spin_unlock_irqrestore(&musbfsh->lock, flags);
return ret;
}
/* Allocate and initialize qh, minimizing the work done each time
* hw_ep gets reprogrammed, or with irqs blocked. Then schedule it.
*
* REVISIT consider a dedicated qh kmem_cache, so it's harder
* for bugs in other kernel code to break this driver...
*/
qh = kzalloc(sizeof(*qh), GFP_ATOMIC);
if (!qh) {
usb_hcd_unlink_urb_from_ep(hcd, urb);
spin_unlock_irqrestore(&musbfsh->lock, flags);
return -ENOMEM;
}
qh->hep = hep;
qh->dev = urb->dev;
INIT_LIST_HEAD(&qh->ring);
qh->is_ready = 1;
qh->maxpacket = le16_to_cpu(epd->wMaxPacketSize);
qh->type = usb_endpoint_type(epd);
INFO("desc type=%d\r\n", qh->type);
/* Bits 11 & 12 of wMaxPacketSize encode high bandwidth multiplier.
* Some musb cores don't support high bandwidth ISO transfers; and
* we don't (yet!) support high bandwidth interrupt transfers.
*/
qh->hb_mult = 1 + ((qh->maxpacket >> 11) & 0x03);
if (qh->hb_mult > 1) {
int ok = (qh->type == USB_ENDPOINT_XFER_ISOC);
if (ok)
ok = (usb_pipein(urb->pipe) && musbfsh->hb_iso_rx)
|| (usb_pipeout(urb->pipe) && musbfsh->hb_iso_tx);
if (!ok) {
ret = -EMSGSIZE;
goto done;
}
qh->maxpacket &= 0x7ff;
}
qh->epnum = usb_endpoint_num(epd);
INFO("desc epnum=%d\r\n", qh->epnum);
/* NOTE: urb->dev->devnum is wrong during SET_ADDRESS */
qh->addr_reg = (u8) usb_pipedevice(urb->pipe);
INFO("desc pipe=0x%x, desc devnum=%d\r\n", urb->pipe, urb->dev->devnum);
/* precompute rxtype/txtype/type0 register */
type_reg = (qh->type << 4) | qh->epnum;
switch (urb->dev->speed) {
case USB_SPEED_LOW:
type_reg |= 0xc0;
break;
case USB_SPEED_FULL:
type_reg |= 0x80;
break;
default:
type_reg |= 0x40;
}
qh->type_reg = type_reg;
/* Precompute RXINTERVAL/TXINTERVAL register */
switch (qh->type) {
case USB_ENDPOINT_XFER_INT:
/*
* Full/low speeds use the linear encoding,
* high speed uses the logarithmic encoding.
*/
if (urb->dev->speed <= USB_SPEED_FULL) {
interval = max_t(u8, epd->bInterval, 1);
break;
}
case USB_ENDPOINT_XFER_ISOC:
/* ISO always uses logarithmic encoding */
interval = min_t(u8, epd->bInterval, 16);
break;
default:
/* REVISIT we actually want to use NAK limits, hinting to the
* transfer scheduling logic to try some other qh, e.g. try
* for 2 msec first:
*
* interval = (USB_SPEED_HIGH == urb->dev->speed) ? 16 : 2;
*
* The downside of disabling this is that transfer scheduling
* gets VERY unfair for nonperiodic transfers; a misbehaving
* peripheral could make that hurt. That's perfectly normal
* for reads from network or serial adapters ... so we have
* partial NAKlimit support for bulk RX.
*
* The upside of disabling it is simpler transfer scheduling.
*/
interval = 0;
}
qh->intv_reg = interval;
/* precompute addressing for external hub/tt ports */
if (musbfsh->is_multipoint) {
struct usb_device *parent = urb->dev->parent;
if (parent != hcd->self.root_hub) {
qh->h_addr_reg = (u8) parent->devnum;
/* set up tt info if needed */
if (urb->dev->tt) {
qh->h_port_reg = (u8) urb->dev->ttport;
if (urb->dev->tt->hub)
qh->h_addr_reg =
(u8)urb->dev->tt->hub->devnum;
if (urb->dev->tt->multi)
qh->h_addr_reg |= 0x80;
}
}
INFO("addr_reg=0x%x,h_addr_reg=0x%x,h_port_reg=0x%x",
qh->addr_reg, qh->h_addr_reg, qh->h_port_reg);
}
/* invariant: hep->hcpriv is null OR the qh that's already scheduled.
* until we get real dma queues (with an entry for each urb/buffer),
* we only have work to do in the former case.
*/
if (hep->hcpriv) {
/* some concurrent activity submitted another urb to hep...
* odd, rare, error prone, but legal.
*/
kfree(qh);
qh = NULL;
ret = 0;
} else {
#ifdef CONFIG_MTK_MUSBFSH_QMU_SUPPORT
if ((!usb_pipecontrol(urb->pipe)) && ((usb_pipetype(urb->pipe) + 1) & mtk11_host_qmu_pipe_msk))
qh->is_use_qmu = 1;
#endif
ret = musbfsh_schedule(musbfsh, qh,
(epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK));
/*
* MYDBG("after musbfsh_schedule,
* urb:%x, ret:%d, ep:%x\n", urb, ret,
* epd->bEndpointAddress);
*/
}
if (ret == 0) {
urb->hcpriv = qh;
/*
* FIXME: set urb->start_frame for iso/intr, it's tested in
* musbfsh_start_urb(), but otherwise only konicawc cares ...
*/
}
done:
spin_unlock_irqrestore(&musbfsh->lock, flags);
if (ret != 0) {
spin_lock_irqsave(&musbfsh->lock, flags);
usb_hcd_unlink_urb_from_ep(hcd, urb);
spin_unlock_irqrestore(&musbfsh->lock, flags);
kfree(qh);
}
return ret;
}
/*
* abort a transfer that's at the head of a hardware queue.
* called with controller locked, irqs blocked
* that hardware queue advances to the next transfer, unless prevented
*/
static int musbfsh_cleanup_urb(struct urb *urb, struct musbfsh_qh *qh)
{
struct musbfsh_hw_ep *ep = qh->hw_ep;
void __iomem *epio = ep->regs;
unsigned hw_end = ep->epnum;
void __iomem *regs = ep->musbfsh->mregs;
int is_in = usb_pipein(urb->pipe);
int stat = 0;
u16 csr;
INFO("%s++\r\n", __func__);
musbfsh_ep_select(regs, hw_end);
if (is_dma_capable()) {
struct dma_channel *dma;
dma = is_in ? ep->rx_channel : ep->tx_channel;
if (dma) {
stat = ep->musbfsh->dma_controller->channel_abort(dma);
INFO("abort %cX%d DMA for urb %p --> %d\n",
is_in ? 'R' : 'T', ep->epnum, urb, stat);
urb->actual_length += dma->actual_len;
dma->actual_len = 0L;
}
}
/* turn off DMA requests, discard state, stop polling ... */
if (is_in) {
/* giveback saves bulk toggle */
csr = musbfsh_h_flush_rxfifo(ep, 0);
/* REVISIT we still get an irq; should likely clear the
* endpoint's irq stat here to avoid bogus irqs.
* clearing that stat is platform-specific...
*/
} else if (ep->epnum) {
musbfsh_h_tx_flush_fifo(ep);
csr = musbfsh_readw(epio, MUSBFSH_TXCSR);
csr &= ~(MUSBFSH_TXCSR_AUTOSET
| MUSBFSH_TXCSR_DMAENAB
| MUSBFSH_TXCSR_H_RXSTALL
| MUSBFSH_TXCSR_H_NAKTIMEOUT
| MUSBFSH_TXCSR_H_ERROR | MUSBFSH_TXCSR_TXPKTRDY);
musbfsh_writew(epio, MUSBFSH_TXCSR, csr);
/* REVISIT may need to clear FLUSHFIFO ... */
musbfsh_writew(epio, MUSBFSH_TXCSR, csr);
/* flush cpu writebuffer */
csr = musbfsh_readw(epio, MUSBFSH_TXCSR);
} else {
musbfsh_h_ep0_flush_fifo(ep);
}
if (stat == 0)
musbfsh_advance_schedule(ep->musbfsh, urb, ep, is_in);
return stat;
}
static int musbfsh_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
{
struct musbfsh *musbfsh = hcd_to_musbfsh(hcd);
struct musbfsh_qh *qh;
unsigned long flags;
int is_in = usb_pipein(urb->pipe);
int ret;
INFO("urb=%p, dev%d ep%d%s\n", urb,
usb_pipedevice(urb->pipe), usb_pipeendpoint(urb->pipe),
is_in ? "in" : "out");
spin_lock_irqsave(&musbfsh->lock, flags);
ret = usb_hcd_check_unlink_urb(hcd, urb, status);
if (ret)
goto done;
qh = urb->hcpriv;
if (!qh)
goto done;
/*
* Any URB not actively programmed into endpoint hardware can be
* immediately given back; that's any URB not at the head of an
* endpoint queue, unless someday we get real DMA queues. And even
* if it's at the head, it might not be known to the hardware...
*
* Otherwise abort current transfer, pending DMA, etc.; urb->status
* has already been updated. This is a synchronous abort; it'd be
* OK to hold off until after some IRQ, though.
*
* NOTE: qh is invalid unless !list_empty(&hep->urb_list)
*/
if (!qh->is_ready
|| urb->urb_list.prev != &qh->hep->urb_list
|| musbfsh_ep_get_qh(qh->hw_ep, is_in) != qh) {
int ready = qh->is_ready;
qh->is_ready = 0;
musbfsh_giveback(musbfsh, urb, 0);
qh->is_ready = ready;
/* If nothing else (usually musbfsh_giveback) is using it
* and its URB list has emptied, recycle this qh.
*/
if (ready && list_empty(&qh->hep->urb_list)) {
#ifdef CONFIG_MTK_MUSBFSH_QMU_SUPPORT
if (qh->is_use_qmu)
mtk11_disable_q(musbfsh, qh->hw_ep->epnum, is_in);
#endif
qh->hep->hcpriv = NULL;
list_del(&qh->ring);
if (musbfsh_host_dynamic_fifo && qh->type != USB_ENDPOINT_XFER_CONTROL)
musbfsh_host_free_ep_fifo(musbfsh, qh, is_in);
kfree(qh);
}
} else {
spin_unlock_irqrestore(&musbfsh->lock, flags);
if (is_dma_capable() && is_in && usb_pipeendpoint(urb->pipe)) {
ret = wait_for_completion_timeout(&urb->done, msecs_to_jiffies(50));
if (ret)
return status;
INFO("wait time out\n");
}
spin_lock_irqsave(&musbfsh->lock, flags);
ret = musbfsh_cleanup_urb(urb, qh);
}
done:
spin_unlock_irqrestore(&musbfsh->lock, flags);
return ret;
}
/* disable an endpoint */
static void musbfsh_h_disable(struct usb_hcd *hcd,
struct usb_host_endpoint *hep)
{
u8 is_in = hep->desc.bEndpointAddress & USB_DIR_IN;
unsigned long flags;
struct musbfsh *musbfsh = hcd_to_musbfsh(hcd);
struct musbfsh_qh *qh;
struct urb *urb;
WARNING("%s++: ep: 0x%x\r\n",
__func__, hep->desc.bEndpointAddress);
spin_lock_irqsave(&musbfsh->lock, flags);
qh = hep->hcpriv;
if (qh == NULL) {
MYDBG("qh == NULL\n");
goto exit;
}
/* NOTE: qh is invalid unless !list_empty(&hep->urb_list) */
/* Kick the first URB off the hardware, if needed */
qh->is_ready = 0;
if (musbfsh_ep_get_qh(qh->hw_ep, is_in) == qh) {
urb = next_urb(qh);
/*
* work around from tablet,
* avoid KE for qh->hep content 0x6b6b6b6b...
* side effect will cause touch memory after free
*/
/*
* enable this workaround for
* irq->adv_schedule / musbfsh_h_disable
* cocurrency issue
*/
if (!virt_addr_valid(urb)) {
MYDBG("urb(%p) addr error\n", urb);
goto exit;
}
/* make software (then hardware) stop ASAP */
if (!urb->unlinked)
urb->status = -ESHUTDOWN;
/* cleanup */
musbfsh_cleanup_urb(urb, qh);
/* Then nuke all the others ... and advance the
* queue on hw_ep (e.g. bulk ring) when we're done.
*/
while (!list_empty(&hep->urb_list)) {
urb = next_urb(qh);
urb->status = -ESHUTDOWN;
musbfsh_advance_schedule(musbfsh, urb, qh->hw_ep,
is_in);
}
} else {
/* Just empty the queue; the hardware is busy with
* other transfers, and since !qh->is_ready nothing
* will activate any of these as it advances.
*/
while (!list_empty(&hep->urb_list))
musbfsh_giveback(musbfsh, next_urb(qh), -ESHUTDOWN);
#ifndef CONFIG_MTK_MUSBFSH_BIND_DEV_EP
#ifdef CONFIG_MTK_MUSBFSH_QMU_SUPPORT
if (qh->is_use_qmu)
mtk11_disable_q(musbfsh, qh->hw_ep->epnum, is_in);
#endif
hep->hcpriv = NULL;
list_del(&qh->ring);
if (musbfsh_host_dynamic_fifo && qh->type != USB_ENDPOINT_XFER_CONTROL)
musbfsh_host_free_ep_fifo(musbfsh, qh, is_in);
kfree(qh);
#endif
}
exit:
#ifdef CONFIG_MTK_MUSBFSH_BIND_DEV_EP
if (hep->hcpriv) {
struct dma_controller *dma = musbfsh->dma_controller;
struct musbfsh_hw_ep *hw_ep;
qh = hep->hcpriv;
hw_ep = qh->hw_ep;
if (is_in) {
hw_ep->rx_reinit = 1;
if (hw_ep->rx_channel) {
dma->channel_release(hw_ep->rx_channel);
hw_ep->rx_channel = NULL;
}
} else {
hw_ep->tx_reinit = 1;
if (hw_ep->tx_channel) {
dma->channel_release(hw_ep->tx_channel);
hw_ep->tx_channel = NULL;
}
}
musbfsh_ep_set_qh(qh->hw_ep, is_in, NULL);
hep->hcpriv = NULL;
if (musbfsh_host_dynamic_fifo && qh->type != USB_ENDPOINT_XFER_CONTROL)
musbfsh_host_free_ep_fifo(musbfsh, qh, is_in);
#ifdef CONFIG_MTK_MUSBFSH_QMU_SUPPORT
if (qh->is_use_qmu)
mtk11_disable_q(musbfsh, qh->hw_ep->epnum, is_in);
#endif
if (qh->mux == 1) {
struct list_head *head;
head = qh->ring.prev;
list_del(&qh->ring);
kfree(qh);
qh = first_qh(head);
} else {
kfree(qh);
qh = NULL;
}
}
#endif
spin_unlock_irqrestore(&musbfsh->lock, flags);
}
static int musbfsh_h_get_frame_number(struct usb_hcd *hcd)
{
struct musbfsh *musbfsh = hcd_to_musbfsh(hcd);
return musbfsh_readw(musbfsh->mregs, MUSBFSH_FRAME);
}
static int musbfsh_h_start(struct usb_hcd *hcd)
{
struct musbfsh *musbfsh = hcd_to_musbfsh(hcd);
INFO("musbfsh_h_start++\r\n");
/* NOTE: musbfsh_start() is called when the hub driver turns
* on port power, or when (OTG) peripheral starts.
*/
hcd->state = HC_STATE_RUNNING;
musbfsh->port1_status = 0;
return 0;
}
static void musbfsh_h_stop(struct usb_hcd *hcd)
{
INFO("musbfsh_h_stop++\r\n");
musbfsh_stop(hcd_to_musbfsh(hcd));
hcd->state = HC_STATE_HALT;
}
/* only send suspend signal to bus */
static int musbfsh_bus_suspend(struct usb_hcd *hcd)
{
struct musbfsh *musbfsh = hcd_to_musbfsh(hcd);
unsigned char power = musbfsh_readb(musbfsh->mregs, MUSBFSH_POWER);
WARNING("musbfsh_bus_suspend++,power=0x%x\r\n", power);
#ifdef CONFIG_MTK_DT_USB_SUPPORT
#if defined(CONFIG_PM_RUNTIME)
usb11_plat_suspend();
#endif
#endif
#ifdef CONFIG_MTK_DT_USB_SUPPORT
#if defined(CONFIG_PM_RUNTIME) && defined(USB11_REMOTE_IRQ_NON_AUTO_MASK)
enable_remote_wake_up();
#endif
#endif
#ifdef MTK_USB_RUNTIME_SUPPORT
/*
* Edge triggered EINT interrupt will be hold after masked (only one),
* and reported after unmasked.
*/
mt_eint_unmask(CUST_EINT_MT6280_USB_WAKEUP_NUM);
#endif
/*
* wx, let child port do the job;
* joson,runtime suspend not ready now,i
* set suspend signal here
*/
return 0;
}
/* only send resume signal to bus */
static int musbfsh_bus_resume(struct usb_hcd *hcd)
{
/* resuming child port does the work */
struct musbfsh *musbfsh = hcd_to_musbfsh(hcd);
unsigned char power;
#ifdef CONFIG_MTK_DT_USB_SUPPORT
#if defined(CONFIG_PM_RUNTIME)
usb11_plat_resume();
return 0;
#endif
#endif
#ifdef MTK_USB_RUNTIME_SUPPORT
mt_eint_mask(CUST_EINT_MT6280_USB_WAKEUP_NUM);
#endif
power = musbfsh_readb(musbfsh->mregs, MUSBFSH_POWER);
WARNING("musbfsh_bus_resume++,power=0x%x\r\n", power);
/*
* wx, let child port do the job;
* joson,runtime suspend not ready now,
* set resume signal here
*/
return 0;
}
struct hc_driver musbfsh_hc_driver = {
.description = "musbfsh-hcd",
.product_desc = "MUSBFSH HDRC host driver",
.hcd_priv_size = sizeof(struct musbfsh),
.flags = HCD_USB2 | HCD_MEMORY,
/*
* not using irq handler or reset hooks from usbcore, since
* those must be shared with peripheral code for OTG configs
*/
.start = musbfsh_h_start,
.stop = musbfsh_h_stop,
.get_frame_number = musbfsh_h_get_frame_number,
.urb_enqueue = musbfsh_urb_enqueue,
.urb_dequeue = musbfsh_urb_dequeue,
.endpoint_disable = musbfsh_h_disable,
.hub_status_data = musbfsh_hub_status_data,
.hub_control = musbfsh_hub_control,
.bus_suspend = musbfsh_bus_suspend,
.bus_resume = musbfsh_bus_resume,
/* .start_port_reset = NULL, */
/* .hub_irq_enable = NULL, */
};