| /* | |
| * Machine check handler. | |
| * | |
| * K8 parts Copyright 2002,2003 Andi Kleen, SuSE Labs. | |
| * Rest from unknown author(s). | |
| * 2004 Andi Kleen. Rewrote most of it. | |
| * Copyright 2008 Intel Corporation | |
| * Author: Andi Kleen | |
| */ | |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | |
| #include <linux/thread_info.h> | |
| #include <linux/capability.h> | |
| #include <linux/miscdevice.h> | |
| #include <linux/ratelimit.h> | |
| #include <linux/rcupdate.h> | |
| #include <linux/kobject.h> | |
| #include <linux/uaccess.h> | |
| #include <linux/kdebug.h> | |
| #include <linux/kernel.h> | |
| #include <linux/percpu.h> | |
| #include <linux/string.h> | |
| #include <linux/device.h> | |
| #include <linux/syscore_ops.h> | |
| #include <linux/delay.h> | |
| #include <linux/ctype.h> | |
| #include <linux/sched.h> | |
| #include <linux/sysfs.h> | |
| #include <linux/types.h> | |
| #include <linux/slab.h> | |
| #include <linux/init.h> | |
| #include <linux/kmod.h> | |
| #include <linux/poll.h> | |
| #include <linux/nmi.h> | |
| #include <linux/cpu.h> | |
| #include <linux/ras.h> | |
| #include <linux/smp.h> | |
| #include <linux/fs.h> | |
| #include <linux/mm.h> | |
| #include <linux/debugfs.h> | |
| #include <linux/irq_work.h> | |
| #include <linux/export.h> | |
| #include <linux/jump_label.h> | |
| #include <linux/set_memory.h> | |
| #include <asm/intel-family.h> | |
| #include <asm/processor.h> | |
| #include <asm/traps.h> | |
| #include <asm/tlbflush.h> | |
| #include <asm/mce.h> | |
| #include <asm/msr.h> | |
| #include <asm/reboot.h> | |
| #include "mce-internal.h" | |
| static DEFINE_MUTEX(mce_log_mutex); | |
| /* sysfs synchronization */ | |
| static DEFINE_MUTEX(mce_sysfs_mutex); | |
| #define CREATE_TRACE_POINTS | |
| #include <trace/events/mce.h> | |
| #define SPINUNIT 100 /* 100ns */ | |
| DEFINE_PER_CPU(unsigned, mce_exception_count); | |
| struct mce_bank *mce_banks __read_mostly; | |
| struct mce_vendor_flags mce_flags __read_mostly; | |
| struct mca_config mca_cfg __read_mostly = { | |
| .bootlog = -1, | |
| /* | |
| * Tolerant levels: | |
| * 0: always panic on uncorrected errors, log corrected errors | |
| * 1: panic or SIGBUS on uncorrected errors, log corrected errors | |
| * 2: SIGBUS or log uncorrected errors (if possible), log corr. errors | |
| * 3: never panic or SIGBUS, log all errors (for testing only) | |
| */ | |
| .tolerant = 1, | |
| .monarch_timeout = -1 | |
| }; | |
| static DEFINE_PER_CPU(struct mce, mces_seen); | |
| static unsigned long mce_need_notify; | |
| static int cpu_missing; | |
| /* | |
| * MCA banks polled by the period polling timer for corrected events. | |
| * With Intel CMCI, this only has MCA banks which do not support CMCI (if any). | |
| */ | |
| DEFINE_PER_CPU(mce_banks_t, mce_poll_banks) = { | |
| [0 ... BITS_TO_LONGS(MAX_NR_BANKS)-1] = ~0UL | |
| }; | |
| /* | |
| * MCA banks controlled through firmware first for corrected errors. | |
| * This is a global list of banks for which we won't enable CMCI and we | |
| * won't poll. Firmware controls these banks and is responsible for | |
| * reporting corrected errors through GHES. Uncorrected/recoverable | |
| * errors are still notified through a machine check. | |
| */ | |
| mce_banks_t mce_banks_ce_disabled; | |
| static struct work_struct mce_work; | |
| static struct irq_work mce_irq_work; | |
| static void (*quirk_no_way_out)(int bank, struct mce *m, struct pt_regs *regs); | |
| /* | |
| * CPU/chipset specific EDAC code can register a notifier call here to print | |
| * MCE errors in a human-readable form. | |
| */ | |
| BLOCKING_NOTIFIER_HEAD(x86_mce_decoder_chain); | |
| /* Do initial initialization of a struct mce */ | |
| void mce_setup(struct mce *m) | |
| { | |
| memset(m, 0, sizeof(struct mce)); | |
| m->cpu = m->extcpu = smp_processor_id(); | |
| /* need the internal __ version to avoid deadlocks */ | |
| m->time = __ktime_get_real_seconds(); | |
| m->cpuvendor = boot_cpu_data.x86_vendor; | |
| m->cpuid = cpuid_eax(1); | |
| m->socketid = cpu_data(m->extcpu).phys_proc_id; | |
| m->apicid = cpu_data(m->extcpu).initial_apicid; | |
| rdmsrl(MSR_IA32_MCG_CAP, m->mcgcap); | |
| if (this_cpu_has(X86_FEATURE_INTEL_PPIN)) | |
| rdmsrl(MSR_PPIN, m->ppin); | |
| m->microcode = boot_cpu_data.microcode; | |
| } | |
| DEFINE_PER_CPU(struct mce, injectm); | |
| EXPORT_PER_CPU_SYMBOL_GPL(injectm); | |
| void mce_log(struct mce *m) | |
| { | |
| if (!mce_gen_pool_add(m)) | |
| irq_work_queue(&mce_irq_work); | |
| } | |
| void mce_inject_log(struct mce *m) | |
| { | |
| mutex_lock(&mce_log_mutex); | |
| mce_log(m); | |
| mutex_unlock(&mce_log_mutex); | |
| } | |
| EXPORT_SYMBOL_GPL(mce_inject_log); | |
| static struct notifier_block mce_srao_nb; | |
| /* | |
| * We run the default notifier if we have only the SRAO, the first and the | |
| * default notifier registered. I.e., the mandatory NUM_DEFAULT_NOTIFIERS | |
| * notifiers registered on the chain. | |
| */ | |
| #define NUM_DEFAULT_NOTIFIERS 3 | |
| static atomic_t num_notifiers; | |
| void mce_register_decode_chain(struct notifier_block *nb) | |
| { | |
| if (WARN_ON(nb->priority > MCE_PRIO_MCELOG && nb->priority < MCE_PRIO_EDAC)) | |
| return; | |
| atomic_inc(&num_notifiers); | |
| blocking_notifier_chain_register(&x86_mce_decoder_chain, nb); | |
| } | |
| EXPORT_SYMBOL_GPL(mce_register_decode_chain); | |
| void mce_unregister_decode_chain(struct notifier_block *nb) | |
| { | |
| atomic_dec(&num_notifiers); | |
| blocking_notifier_chain_unregister(&x86_mce_decoder_chain, nb); | |
| } | |
| EXPORT_SYMBOL_GPL(mce_unregister_decode_chain); | |
| static inline u32 ctl_reg(int bank) | |
| { | |
| return MSR_IA32_MCx_CTL(bank); | |
| } | |
| static inline u32 status_reg(int bank) | |
| { | |
| return MSR_IA32_MCx_STATUS(bank); | |
| } | |
| static inline u32 addr_reg(int bank) | |
| { | |
| return MSR_IA32_MCx_ADDR(bank); | |
| } | |
| static inline u32 misc_reg(int bank) | |
| { | |
| return MSR_IA32_MCx_MISC(bank); | |
| } | |
| static inline u32 smca_ctl_reg(int bank) | |
| { | |
| return MSR_AMD64_SMCA_MCx_CTL(bank); | |
| } | |
| static inline u32 smca_status_reg(int bank) | |
| { | |
| return MSR_AMD64_SMCA_MCx_STATUS(bank); | |
| } | |
| static inline u32 smca_addr_reg(int bank) | |
| { | |
| return MSR_AMD64_SMCA_MCx_ADDR(bank); | |
| } | |
| static inline u32 smca_misc_reg(int bank) | |
| { | |
| return MSR_AMD64_SMCA_MCx_MISC(bank); | |
| } | |
| struct mca_msr_regs msr_ops = { | |
| .ctl = ctl_reg, | |
| .status = status_reg, | |
| .addr = addr_reg, | |
| .misc = misc_reg | |
| }; | |
| static void __print_mce(struct mce *m) | |
| { | |
| pr_emerg(HW_ERR "CPU %d: Machine Check%s: %Lx Bank %d: %016Lx\n", | |
| m->extcpu, | |
| (m->mcgstatus & MCG_STATUS_MCIP ? " Exception" : ""), | |
| m->mcgstatus, m->bank, m->status); | |
| if (m->ip) { | |
| pr_emerg(HW_ERR "RIP%s %02x:<%016Lx> ", | |
| !(m->mcgstatus & MCG_STATUS_EIPV) ? " !INEXACT!" : "", | |
| m->cs, m->ip); | |
| if (m->cs == __KERNEL_CS) | |
| pr_cont("{%pS}", (void *)(unsigned long)m->ip); | |
| pr_cont("\n"); | |
| } | |
| pr_emerg(HW_ERR "TSC %llx ", m->tsc); | |
| if (m->addr) | |
| pr_cont("ADDR %llx ", m->addr); | |
| if (m->misc) | |
| pr_cont("MISC %llx ", m->misc); | |
| if (mce_flags.smca) { | |
| if (m->synd) | |
| pr_cont("SYND %llx ", m->synd); | |
| if (m->ipid) | |
| pr_cont("IPID %llx ", m->ipid); | |
| } | |
| pr_cont("\n"); | |
| /* | |
| * Note this output is parsed by external tools and old fields | |
| * should not be changed. | |
| */ | |
| pr_emerg(HW_ERR "PROCESSOR %u:%x TIME %llu SOCKET %u APIC %x microcode %x\n", | |
| m->cpuvendor, m->cpuid, m->time, m->socketid, m->apicid, | |
| m->microcode); | |
| } | |
| static void print_mce(struct mce *m) | |
| { | |
| __print_mce(m); | |
| if (m->cpuvendor != X86_VENDOR_AMD) | |
| pr_emerg_ratelimited(HW_ERR "Run the above through 'mcelog --ascii'\n"); | |
| } | |
| #define PANIC_TIMEOUT 5 /* 5 seconds */ | |
| static atomic_t mce_panicked; | |
| static int fake_panic; | |
| static atomic_t mce_fake_panicked; | |
| /* Panic in progress. Enable interrupts and wait for final IPI */ | |
| static void wait_for_panic(void) | |
| { | |
| long timeout = PANIC_TIMEOUT*USEC_PER_SEC; | |
| preempt_disable(); | |
| local_irq_enable(); | |
| while (timeout-- > 0) | |
| udelay(1); | |
| if (panic_timeout == 0) | |
| panic_timeout = mca_cfg.panic_timeout; | |
| panic("Panicing machine check CPU died"); | |
| } | |
| static void mce_panic(const char *msg, struct mce *final, char *exp) | |
| { | |
| int apei_err = 0; | |
| struct llist_node *pending; | |
| struct mce_evt_llist *l; | |
| if (!fake_panic) { | |
| /* | |
| * Make sure only one CPU runs in machine check panic | |
| */ | |
| if (atomic_inc_return(&mce_panicked) > 1) | |
| wait_for_panic(); | |
| barrier(); | |
| bust_spinlocks(1); | |
| console_verbose(); | |
| } else { | |
| /* Don't log too much for fake panic */ | |
| if (atomic_inc_return(&mce_fake_panicked) > 1) | |
| return; | |
| } | |
| pending = mce_gen_pool_prepare_records(); | |
| /* First print corrected ones that are still unlogged */ | |
| llist_for_each_entry(l, pending, llnode) { | |
| struct mce *m = &l->mce; | |
| if (!(m->status & MCI_STATUS_UC)) { | |
| print_mce(m); | |
| if (!apei_err) | |
| apei_err = apei_write_mce(m); | |
| } | |
| } | |
| /* Now print uncorrected but with the final one last */ | |
| llist_for_each_entry(l, pending, llnode) { | |
| struct mce *m = &l->mce; | |
| if (!(m->status & MCI_STATUS_UC)) | |
| continue; | |
| if (!final || mce_cmp(m, final)) { | |
| print_mce(m); | |
| if (!apei_err) | |
| apei_err = apei_write_mce(m); | |
| } | |
| } | |
| if (final) { | |
| print_mce(final); | |
| if (!apei_err) | |
| apei_err = apei_write_mce(final); | |
| } | |
| if (cpu_missing) | |
| pr_emerg(HW_ERR "Some CPUs didn't answer in synchronization\n"); | |
| if (exp) | |
| pr_emerg(HW_ERR "Machine check: %s\n", exp); | |
| if (!fake_panic) { | |
| if (panic_timeout == 0) | |
| panic_timeout = mca_cfg.panic_timeout; | |
| panic(msg); | |
| } else | |
| pr_emerg(HW_ERR "Fake kernel panic: %s\n", msg); | |
| } | |
| /* Support code for software error injection */ | |
| static int msr_to_offset(u32 msr) | |
| { | |
| unsigned bank = __this_cpu_read(injectm.bank); | |
| if (msr == mca_cfg.rip_msr) | |
| return offsetof(struct mce, ip); | |
| if (msr == msr_ops.status(bank)) | |
| return offsetof(struct mce, status); | |
| if (msr == msr_ops.addr(bank)) | |
| return offsetof(struct mce, addr); | |
| if (msr == msr_ops.misc(bank)) | |
| return offsetof(struct mce, misc); | |
| if (msr == MSR_IA32_MCG_STATUS) | |
| return offsetof(struct mce, mcgstatus); | |
| return -1; | |
| } | |
| /* MSR access wrappers used for error injection */ | |
| static u64 mce_rdmsrl(u32 msr) | |
| { | |
| u64 v; | |
| if (__this_cpu_read(injectm.finished)) { | |
| int offset = msr_to_offset(msr); | |
| if (offset < 0) | |
| return 0; | |
| return *(u64 *)((char *)this_cpu_ptr(&injectm) + offset); | |
| } | |
| if (rdmsrl_safe(msr, &v)) { | |
| WARN_ONCE(1, "mce: Unable to read MSR 0x%x!\n", msr); | |
| /* | |
| * Return zero in case the access faulted. This should | |
| * not happen normally but can happen if the CPU does | |
| * something weird, or if the code is buggy. | |
| */ | |
| v = 0; | |
| } | |
| return v; | |
| } | |
| static void mce_wrmsrl(u32 msr, u64 v) | |
| { | |
| if (__this_cpu_read(injectm.finished)) { | |
| int offset = msr_to_offset(msr); | |
| if (offset >= 0) | |
| *(u64 *)((char *)this_cpu_ptr(&injectm) + offset) = v; | |
| return; | |
| } | |
| wrmsrl(msr, v); | |
| } | |
| /* | |
| * Collect all global (w.r.t. this processor) status about this machine | |
| * check into our "mce" struct so that we can use it later to assess | |
| * the severity of the problem as we read per-bank specific details. | |
| */ | |
| static inline void mce_gather_info(struct mce *m, struct pt_regs *regs) | |
| { | |
| mce_setup(m); | |
| m->mcgstatus = mce_rdmsrl(MSR_IA32_MCG_STATUS); | |
| if (regs) { | |
| /* | |
| * Get the address of the instruction at the time of | |
| * the machine check error. | |
| */ | |
| if (m->mcgstatus & (MCG_STATUS_RIPV|MCG_STATUS_EIPV)) { | |
| m->ip = regs->ip; | |
| m->cs = regs->cs; | |
| /* | |
| * When in VM86 mode make the cs look like ring 3 | |
| * always. This is a lie, but it's better than passing | |
| * the additional vm86 bit around everywhere. | |
| */ | |
| if (v8086_mode(regs)) | |
| m->cs |= 3; | |
| } | |
| /* Use accurate RIP reporting if available. */ | |
| if (mca_cfg.rip_msr) | |
| m->ip = mce_rdmsrl(mca_cfg.rip_msr); | |
| } | |
| } | |
| int mce_available(struct cpuinfo_x86 *c) | |
| { | |
| if (mca_cfg.disabled) | |
| return 0; | |
| return cpu_has(c, X86_FEATURE_MCE) && cpu_has(c, X86_FEATURE_MCA); | |
| } | |
| static void mce_schedule_work(void) | |
| { | |
| if (!mce_gen_pool_empty()) | |
| schedule_work(&mce_work); | |
| } | |
| static void mce_irq_work_cb(struct irq_work *entry) | |
| { | |
| mce_schedule_work(); | |
| } | |
| static void mce_report_event(struct pt_regs *regs) | |
| { | |
| if (regs->flags & (X86_VM_MASK|X86_EFLAGS_IF)) { | |
| mce_notify_irq(); | |
| /* | |
| * Triggering the work queue here is just an insurance | |
| * policy in case the syscall exit notify handler | |
| * doesn't run soon enough or ends up running on the | |
| * wrong CPU (can happen when audit sleeps) | |
| */ | |
| mce_schedule_work(); | |
| return; | |
| } | |
| irq_work_queue(&mce_irq_work); | |
| } | |
| /* | |
| * Check if the address reported by the CPU is in a format we can parse. | |
| * It would be possible to add code for most other cases, but all would | |
| * be somewhat complicated (e.g. segment offset would require an instruction | |
| * parser). So only support physical addresses up to page granuality for now. | |
| */ | |
| int mce_usable_address(struct mce *m) | |
| { | |
| if (!(m->status & MCI_STATUS_ADDRV)) | |
| return 0; | |
| /* Checks after this one are Intel-specific: */ | |
| if (boot_cpu_data.x86_vendor != X86_VENDOR_INTEL) | |
| return 1; | |
| if (!(m->status & MCI_STATUS_MISCV)) | |
| return 0; | |
| if (MCI_MISC_ADDR_LSB(m->misc) > PAGE_SHIFT) | |
| return 0; | |
| if (MCI_MISC_ADDR_MODE(m->misc) != MCI_MISC_ADDR_PHYS) | |
| return 0; | |
| return 1; | |
| } | |
| EXPORT_SYMBOL_GPL(mce_usable_address); | |
| bool mce_is_memory_error(struct mce *m) | |
| { | |
| if (m->cpuvendor == X86_VENDOR_AMD) { | |
| return amd_mce_is_memory_error(m); | |
| } else if (m->cpuvendor == X86_VENDOR_INTEL) { | |
| /* | |
| * Intel SDM Volume 3B - 15.9.2 Compound Error Codes | |
| * | |
| * Bit 7 of the MCACOD field of IA32_MCi_STATUS is used for | |
| * indicating a memory error. Bit 8 is used for indicating a | |
| * cache hierarchy error. The combination of bit 2 and bit 3 | |
| * is used for indicating a `generic' cache hierarchy error | |
| * But we can't just blindly check the above bits, because if | |
| * bit 11 is set, then it is a bus/interconnect error - and | |
| * either way the above bits just gives more detail on what | |
| * bus/interconnect error happened. Note that bit 12 can be | |
| * ignored, as it's the "filter" bit. | |
| */ | |
| return (m->status & 0xef80) == BIT(7) || | |
| (m->status & 0xef00) == BIT(8) || | |
| (m->status & 0xeffc) == 0xc; | |
| } | |
| return false; | |
| } | |
| EXPORT_SYMBOL_GPL(mce_is_memory_error); | |
| bool mce_is_correctable(struct mce *m) | |
| { | |
| if (m->cpuvendor == X86_VENDOR_AMD && m->status & MCI_STATUS_DEFERRED) | |
| return false; | |
| if (m->status & MCI_STATUS_UC) | |
| return false; | |
| return true; | |
| } | |
| EXPORT_SYMBOL_GPL(mce_is_correctable); | |
| static bool cec_add_mce(struct mce *m) | |
| { | |
| if (!m) | |
| return false; | |
| /* We eat only correctable DRAM errors with usable addresses. */ | |
| if (mce_is_memory_error(m) && | |
| mce_is_correctable(m) && | |
| mce_usable_address(m)) | |
| if (!cec_add_elem(m->addr >> PAGE_SHIFT)) | |
| return true; | |
| return false; | |
| } | |
| static int mce_first_notifier(struct notifier_block *nb, unsigned long val, | |
| void *data) | |
| { | |
| struct mce *m = (struct mce *)data; | |
| if (!m) | |
| return NOTIFY_DONE; | |
| if (cec_add_mce(m)) | |
| return NOTIFY_STOP; | |
| /* Emit the trace record: */ | |
| trace_mce_record(m); | |
| set_bit(0, &mce_need_notify); | |
| mce_notify_irq(); | |
| return NOTIFY_DONE; | |
| } | |
| static struct notifier_block first_nb = { | |
| .notifier_call = mce_first_notifier, | |
| .priority = MCE_PRIO_FIRST, | |
| }; | |
| static int srao_decode_notifier(struct notifier_block *nb, unsigned long val, | |
| void *data) | |
| { | |
| struct mce *mce = (struct mce *)data; | |
| unsigned long pfn; | |
| if (!mce) | |
| return NOTIFY_DONE; | |
| if (mce_usable_address(mce) && (mce->severity == MCE_AO_SEVERITY)) { | |
| pfn = mce->addr >> PAGE_SHIFT; | |
| if (!memory_failure(pfn, 0)) | |
| set_mce_nospec(pfn); | |
| } | |
| return NOTIFY_OK; | |
| } | |
| static struct notifier_block mce_srao_nb = { | |
| .notifier_call = srao_decode_notifier, | |
| .priority = MCE_PRIO_SRAO, | |
| }; | |
| static int mce_default_notifier(struct notifier_block *nb, unsigned long val, | |
| void *data) | |
| { | |
| struct mce *m = (struct mce *)data; | |
| if (!m) | |
| return NOTIFY_DONE; | |
| if (atomic_read(&num_notifiers) > NUM_DEFAULT_NOTIFIERS) | |
| return NOTIFY_DONE; | |
| __print_mce(m); | |
| return NOTIFY_DONE; | |
| } | |
| static struct notifier_block mce_default_nb = { | |
| .notifier_call = mce_default_notifier, | |
| /* lowest prio, we want it to run last. */ | |
| .priority = MCE_PRIO_LOWEST, | |
| }; | |
| /* | |
| * Read ADDR and MISC registers. | |
| */ | |
| static void mce_read_aux(struct mce *m, int i) | |
| { | |
| if (m->status & MCI_STATUS_MISCV) | |
| m->misc = mce_rdmsrl(msr_ops.misc(i)); | |
| if (m->status & MCI_STATUS_ADDRV) { | |
| m->addr = mce_rdmsrl(msr_ops.addr(i)); | |
| /* | |
| * Mask the reported address by the reported granularity. | |
| */ | |
| if (mca_cfg.ser && (m->status & MCI_STATUS_MISCV)) { | |
| u8 shift = MCI_MISC_ADDR_LSB(m->misc); | |
| m->addr >>= shift; | |
| m->addr <<= shift; | |
| } | |
| /* | |
| * Extract [55:<lsb>] where lsb is the least significant | |
| * *valid* bit of the address bits. | |
| */ | |
| if (mce_flags.smca) { | |
| u8 lsb = (m->addr >> 56) & 0x3f; | |
| m->addr &= GENMASK_ULL(55, lsb); | |
| } | |
| } | |
| if (mce_flags.smca) { | |
| m->ipid = mce_rdmsrl(MSR_AMD64_SMCA_MCx_IPID(i)); | |
| if (m->status & MCI_STATUS_SYNDV) | |
| m->synd = mce_rdmsrl(MSR_AMD64_SMCA_MCx_SYND(i)); | |
| } | |
| } | |
| DEFINE_PER_CPU(unsigned, mce_poll_count); | |
| /* | |
| * Poll for corrected events or events that happened before reset. | |
| * Those are just logged through /dev/mcelog. | |
| * | |
| * This is executed in standard interrupt context. | |
| * | |
| * Note: spec recommends to panic for fatal unsignalled | |
| * errors here. However this would be quite problematic -- | |
| * we would need to reimplement the Monarch handling and | |
| * it would mess up the exclusion between exception handler | |
| * and poll hander -- * so we skip this for now. | |
| * These cases should not happen anyways, or only when the CPU | |
| * is already totally * confused. In this case it's likely it will | |
| * not fully execute the machine check handler either. | |
| */ | |
| bool machine_check_poll(enum mcp_flags flags, mce_banks_t *b) | |
| { | |
| bool error_seen = false; | |
| struct mce m; | |
| int i; | |
| this_cpu_inc(mce_poll_count); | |
| mce_gather_info(&m, NULL); | |
| if (flags & MCP_TIMESTAMP) | |
| m.tsc = rdtsc(); | |
| for (i = 0; i < mca_cfg.banks; i++) { | |
| if (!mce_banks[i].ctl || !test_bit(i, *b)) | |
| continue; | |
| m.misc = 0; | |
| m.addr = 0; | |
| m.bank = i; | |
| barrier(); | |
| m.status = mce_rdmsrl(msr_ops.status(i)); | |
| /* If this entry is not valid, ignore it */ | |
| if (!(m.status & MCI_STATUS_VAL)) | |
| continue; | |
| /* | |
| * If we are logging everything (at CPU online) or this | |
| * is a corrected error, then we must log it. | |
| */ | |
| if ((flags & MCP_UC) || !(m.status & MCI_STATUS_UC)) | |
| goto log_it; | |
| /* | |
| * Newer Intel systems that support software error | |
| * recovery need to make additional checks. Other | |
| * CPUs should skip over uncorrected errors, but log | |
| * everything else. | |
| */ | |
| if (!mca_cfg.ser) { | |
| if (m.status & MCI_STATUS_UC) | |
| continue; | |
| goto log_it; | |
| } | |
| /* Log "not enabled" (speculative) errors */ | |
| if (!(m.status & MCI_STATUS_EN)) | |
| goto log_it; | |
| /* | |
| * Log UCNA (SDM: 15.6.3 "UCR Error Classification") | |
| * UC == 1 && PCC == 0 && S == 0 | |
| */ | |
| if (!(m.status & MCI_STATUS_PCC) && !(m.status & MCI_STATUS_S)) | |
| goto log_it; | |
| /* | |
| * Skip anything else. Presumption is that our read of this | |
| * bank is racing with a machine check. Leave the log alone | |
| * for do_machine_check() to deal with it. | |
| */ | |
| continue; | |
| log_it: | |
| error_seen = true; | |
| mce_read_aux(&m, i); | |
| m.severity = mce_severity(&m, mca_cfg.tolerant, NULL, false); | |
| /* | |
| * Don't get the IP here because it's unlikely to | |
| * have anything to do with the actual error location. | |
| */ | |
| if (!(flags & MCP_DONTLOG) && !mca_cfg.dont_log_ce) | |
| mce_log(&m); | |
| else if (mce_usable_address(&m)) { | |
| /* | |
| * Although we skipped logging this, we still want | |
| * to take action. Add to the pool so the registered | |
| * notifiers will see it. | |
| */ | |
| if (!mce_gen_pool_add(&m)) | |
| mce_schedule_work(); | |
| } | |
| /* | |
| * Clear state for this bank. | |
| */ | |
| mce_wrmsrl(msr_ops.status(i), 0); | |
| } | |
| /* | |
| * Don't clear MCG_STATUS here because it's only defined for | |
| * exceptions. | |
| */ | |
| sync_core(); | |
| return error_seen; | |
| } | |
| EXPORT_SYMBOL_GPL(machine_check_poll); | |
| /* | |
| * Do a quick check if any of the events requires a panic. | |
| * This decides if we keep the events around or clear them. | |
| */ | |
| static int mce_no_way_out(struct mce *m, char **msg, unsigned long *validp, | |
| struct pt_regs *regs) | |
| { | |
| char *tmp; | |
| int i; | |
| for (i = 0; i < mca_cfg.banks; i++) { | |
| m->status = mce_rdmsrl(msr_ops.status(i)); | |
| if (!(m->status & MCI_STATUS_VAL)) | |
| continue; | |
| __set_bit(i, validp); | |
| if (quirk_no_way_out) | |
| quirk_no_way_out(i, m, regs); | |
| m->bank = i; | |
| if (mce_severity(m, mca_cfg.tolerant, &tmp, true) >= MCE_PANIC_SEVERITY) { | |
| mce_read_aux(m, i); | |
| *msg = tmp; | |
| return 1; | |
| } | |
| } | |
| return 0; | |
| } | |
| /* | |
| * Variable to establish order between CPUs while scanning. | |
| * Each CPU spins initially until executing is equal its number. | |
| */ | |
| static atomic_t mce_executing; | |
| /* | |
| * Defines order of CPUs on entry. First CPU becomes Monarch. | |
| */ | |
| static atomic_t mce_callin; | |
| /* | |
| * Check if a timeout waiting for other CPUs happened. | |
| */ | |
| static int mce_timed_out(u64 *t, const char *msg) | |
| { | |
| /* | |
| * The others already did panic for some reason. | |
| * Bail out like in a timeout. | |
| * rmb() to tell the compiler that system_state | |
| * might have been modified by someone else. | |
| */ | |
| rmb(); | |
| if (atomic_read(&mce_panicked)) | |
| wait_for_panic(); | |
| if (!mca_cfg.monarch_timeout) | |
| goto out; | |
| if ((s64)*t < SPINUNIT) { | |
| if (mca_cfg.tolerant <= 1) | |
| mce_panic(msg, NULL, NULL); | |
| cpu_missing = 1; | |
| return 1; | |
| } | |
| *t -= SPINUNIT; | |
| out: | |
| touch_nmi_watchdog(); | |
| return 0; | |
| } | |
| /* | |
| * The Monarch's reign. The Monarch is the CPU who entered | |
| * the machine check handler first. It waits for the others to | |
| * raise the exception too and then grades them. When any | |
| * error is fatal panic. Only then let the others continue. | |
| * | |
| * The other CPUs entering the MCE handler will be controlled by the | |
| * Monarch. They are called Subjects. | |
| * | |
| * This way we prevent any potential data corruption in a unrecoverable case | |
| * and also makes sure always all CPU's errors are examined. | |
| * | |
| * Also this detects the case of a machine check event coming from outer | |
| * space (not detected by any CPUs) In this case some external agent wants | |
| * us to shut down, so panic too. | |
| * | |
| * The other CPUs might still decide to panic if the handler happens | |
| * in a unrecoverable place, but in this case the system is in a semi-stable | |
| * state and won't corrupt anything by itself. It's ok to let the others | |
| * continue for a bit first. | |
| * | |
| * All the spin loops have timeouts; when a timeout happens a CPU | |
| * typically elects itself to be Monarch. | |
| */ | |
| static void mce_reign(void) | |
| { | |
| int cpu; | |
| struct mce *m = NULL; | |
| int global_worst = 0; | |
| char *msg = NULL; | |
| char *nmsg = NULL; | |
| /* | |
| * This CPU is the Monarch and the other CPUs have run | |
| * through their handlers. | |
| * Grade the severity of the errors of all the CPUs. | |
| */ | |
| for_each_possible_cpu(cpu) { | |
| int severity = mce_severity(&per_cpu(mces_seen, cpu), | |
| mca_cfg.tolerant, | |
| &nmsg, true); | |
| if (severity > global_worst) { | |
| msg = nmsg; | |
| global_worst = severity; | |
| m = &per_cpu(mces_seen, cpu); | |
| } | |
| } | |
| /* | |
| * Cannot recover? Panic here then. | |
| * This dumps all the mces in the log buffer and stops the | |
| * other CPUs. | |
| */ | |
| if (m && global_worst >= MCE_PANIC_SEVERITY && mca_cfg.tolerant < 3) | |
| mce_panic("Fatal machine check", m, msg); | |
| /* | |
| * For UC somewhere we let the CPU who detects it handle it. | |
| * Also must let continue the others, otherwise the handling | |
| * CPU could deadlock on a lock. | |
| */ | |
| /* | |
| * No machine check event found. Must be some external | |
| * source or one CPU is hung. Panic. | |
| */ | |
| if (global_worst <= MCE_KEEP_SEVERITY && mca_cfg.tolerant < 3) | |
| mce_panic("Fatal machine check from unknown source", NULL, NULL); | |
| /* | |
| * Now clear all the mces_seen so that they don't reappear on | |
| * the next mce. | |
| */ | |
| for_each_possible_cpu(cpu) | |
| memset(&per_cpu(mces_seen, cpu), 0, sizeof(struct mce)); | |
| } | |
| static atomic_t global_nwo; | |
| /* | |
| * Start of Monarch synchronization. This waits until all CPUs have | |
| * entered the exception handler and then determines if any of them | |
| * saw a fatal event that requires panic. Then it executes them | |
| * in the entry order. | |
| * TBD double check parallel CPU hotunplug | |
| */ | |
| static int mce_start(int *no_way_out) | |
| { | |
| int order; | |
| int cpus = num_online_cpus(); | |
| u64 timeout = (u64)mca_cfg.monarch_timeout * NSEC_PER_USEC; | |
| if (!timeout) | |
| return -1; | |
| atomic_add(*no_way_out, &global_nwo); | |
| /* | |
| * Rely on the implied barrier below, such that global_nwo | |
| * is updated before mce_callin. | |
| */ | |
| order = atomic_inc_return(&mce_callin); | |
| /* | |
| * Wait for everyone. | |
| */ | |
| while (atomic_read(&mce_callin) != cpus) { | |
| if (mce_timed_out(&timeout, | |
| "Timeout: Not all CPUs entered broadcast exception handler")) { | |
| atomic_set(&global_nwo, 0); | |
| return -1; | |
| } | |
| ndelay(SPINUNIT); | |
| } | |
| /* | |
| * mce_callin should be read before global_nwo | |
| */ | |
| smp_rmb(); | |
| if (order == 1) { | |
| /* | |
| * Monarch: Starts executing now, the others wait. | |
| */ | |
| atomic_set(&mce_executing, 1); | |
| } else { | |
| /* | |
| * Subject: Now start the scanning loop one by one in | |
| * the original callin order. | |
| * This way when there are any shared banks it will be | |
| * only seen by one CPU before cleared, avoiding duplicates. | |
| */ | |
| while (atomic_read(&mce_executing) < order) { | |
| if (mce_timed_out(&timeout, | |
| "Timeout: Subject CPUs unable to finish machine check processing")) { | |
| atomic_set(&global_nwo, 0); | |
| return -1; | |
| } | |
| ndelay(SPINUNIT); | |
| } | |
| } | |
| /* | |
| * Cache the global no_way_out state. | |
| */ | |
| *no_way_out = atomic_read(&global_nwo); | |
| return order; | |
| } | |
| /* | |
| * Synchronize between CPUs after main scanning loop. | |
| * This invokes the bulk of the Monarch processing. | |
| */ | |
| static int mce_end(int order) | |
| { | |
| int ret = -1; | |
| u64 timeout = (u64)mca_cfg.monarch_timeout * NSEC_PER_USEC; | |
| if (!timeout) | |
| goto reset; | |
| if (order < 0) | |
| goto reset; | |
| /* | |
| * Allow others to run. | |
| */ | |
| atomic_inc(&mce_executing); | |
| if (order == 1) { | |
| /* CHECKME: Can this race with a parallel hotplug? */ | |
| int cpus = num_online_cpus(); | |
| /* | |
| * Monarch: Wait for everyone to go through their scanning | |
| * loops. | |
| */ | |
| while (atomic_read(&mce_executing) <= cpus) { | |
| if (mce_timed_out(&timeout, | |
| "Timeout: Monarch CPU unable to finish machine check processing")) | |
| goto reset; | |
| ndelay(SPINUNIT); | |
| } | |
| mce_reign(); | |
| barrier(); | |
| ret = 0; | |
| } else { | |
| /* | |
| * Subject: Wait for Monarch to finish. | |
| */ | |
| while (atomic_read(&mce_executing) != 0) { | |
| if (mce_timed_out(&timeout, | |
| "Timeout: Monarch CPU did not finish machine check processing")) | |
| goto reset; | |
| ndelay(SPINUNIT); | |
| } | |
| /* | |
| * Don't reset anything. That's done by the Monarch. | |
| */ | |
| return 0; | |
| } | |
| /* | |
| * Reset all global state. | |
| */ | |
| reset: | |
| atomic_set(&global_nwo, 0); | |
| atomic_set(&mce_callin, 0); | |
| barrier(); | |
| /* | |
| * Let others run again. | |
| */ | |
| atomic_set(&mce_executing, 0); | |
| return ret; | |
| } | |
| static void mce_clear_state(unsigned long *toclear) | |
| { | |
| int i; | |
| for (i = 0; i < mca_cfg.banks; i++) { | |
| if (test_bit(i, toclear)) | |
| mce_wrmsrl(msr_ops.status(i), 0); | |
| } | |
| } | |
| static int do_memory_failure(struct mce *m) | |
| { | |
| int flags = MF_ACTION_REQUIRED; | |
| int ret; | |
| pr_err("Uncorrected hardware memory error in user-access at %llx", m->addr); | |
| if (!(m->mcgstatus & MCG_STATUS_RIPV)) | |
| flags |= MF_MUST_KILL; | |
| ret = memory_failure(m->addr >> PAGE_SHIFT, flags); | |
| if (ret) | |
| pr_err("Memory error not recovered"); | |
| else | |
| set_mce_nospec(m->addr >> PAGE_SHIFT); | |
| return ret; | |
| } | |
| /* | |
| * Cases where we avoid rendezvous handler timeout: | |
| * 1) If this CPU is offline. | |
| * | |
| * 2) If crashing_cpu was set, e.g. we're entering kdump and we need to | |
| * skip those CPUs which remain looping in the 1st kernel - see | |
| * crash_nmi_callback(). | |
| * | |
| * Note: there still is a small window between kexec-ing and the new, | |
| * kdump kernel establishing a new #MC handler where a broadcasted MCE | |
| * might not get handled properly. | |
| */ | |
| static bool __mc_check_crashing_cpu(int cpu) | |
| { | |
| if (cpu_is_offline(cpu) || | |
| (crashing_cpu != -1 && crashing_cpu != cpu)) { | |
| u64 mcgstatus; | |
| mcgstatus = mce_rdmsrl(MSR_IA32_MCG_STATUS); | |
| if (mcgstatus & MCG_STATUS_RIPV) { | |
| mce_wrmsrl(MSR_IA32_MCG_STATUS, 0); | |
| return true; | |
| } | |
| } | |
| return false; | |
| } | |
| static void __mc_scan_banks(struct mce *m, struct mce *final, | |
| unsigned long *toclear, unsigned long *valid_banks, | |
| int no_way_out, int *worst) | |
| { | |
| struct mca_config *cfg = &mca_cfg; | |
| int severity, i; | |
| for (i = 0; i < cfg->banks; i++) { | |
| __clear_bit(i, toclear); | |
| if (!test_bit(i, valid_banks)) | |
| continue; | |
| if (!mce_banks[i].ctl) | |
| continue; | |
| m->misc = 0; | |
| m->addr = 0; | |
| m->bank = i; | |
| m->status = mce_rdmsrl(msr_ops.status(i)); | |
| if (!(m->status & MCI_STATUS_VAL)) | |
| continue; | |
| /* | |
| * Corrected or non-signaled errors are handled by | |
| * machine_check_poll(). Leave them alone, unless this panics. | |
| */ | |
| if (!(m->status & (cfg->ser ? MCI_STATUS_S : MCI_STATUS_UC)) && | |
| !no_way_out) | |
| continue; | |
| /* Set taint even when machine check was not enabled. */ | |
| add_taint(TAINT_MACHINE_CHECK, LOCKDEP_NOW_UNRELIABLE); | |
| severity = mce_severity(m, cfg->tolerant, NULL, true); | |
| /* | |
| * When machine check was for corrected/deferred handler don't | |
| * touch, unless we're panicking. | |
| */ | |
| if ((severity == MCE_KEEP_SEVERITY || | |
| severity == MCE_UCNA_SEVERITY) && !no_way_out) | |
| continue; | |
| __set_bit(i, toclear); | |
| /* Machine check event was not enabled. Clear, but ignore. */ | |
| if (severity == MCE_NO_SEVERITY) | |
| continue; | |
| mce_read_aux(m, i); | |
| /* assuming valid severity level != 0 */ | |
| m->severity = severity; | |
| mce_log(m); | |
| if (severity > *worst) { | |
| *final = *m; | |
| *worst = severity; | |
| } | |
| } | |
| /* mce_clear_state will clear *final, save locally for use later */ | |
| *m = *final; | |
| } | |
| /* | |
| * The actual machine check handler. This only handles real | |
| * exceptions when something got corrupted coming in through int 18. | |
| * | |
| * This is executed in NMI context not subject to normal locking rules. This | |
| * implies that most kernel services cannot be safely used. Don't even | |
| * think about putting a printk in there! | |
| * | |
| * On Intel systems this is entered on all CPUs in parallel through | |
| * MCE broadcast. However some CPUs might be broken beyond repair, | |
| * so be always careful when synchronizing with others. | |
| */ | |
| void do_machine_check(struct pt_regs *regs, long error_code) | |
| { | |
| DECLARE_BITMAP(valid_banks, MAX_NR_BANKS); | |
| DECLARE_BITMAP(toclear, MAX_NR_BANKS); | |
| struct mca_config *cfg = &mca_cfg; | |
| int cpu = smp_processor_id(); | |
| char *msg = "Unknown"; | |
| struct mce m, *final; | |
| int worst = 0; | |
| /* | |
| * Establish sequential order between the CPUs entering the machine | |
| * check handler. | |
| */ | |
| int order = -1; | |
| /* | |
| * If no_way_out gets set, there is no safe way to recover from this | |
| * MCE. If mca_cfg.tolerant is cranked up, we'll try anyway. | |
| */ | |
| int no_way_out = 0; | |
| /* | |
| * If kill_it gets set, there might be a way to recover from this | |
| * error. | |
| */ | |
| int kill_it = 0; | |
| /* | |
| * MCEs are always local on AMD. Same is determined by MCG_STATUS_LMCES | |
| * on Intel. | |
| */ | |
| int lmce = 1; | |
| if (__mc_check_crashing_cpu(cpu)) | |
| return; | |
| ist_enter(regs); | |
| this_cpu_inc(mce_exception_count); | |
| mce_gather_info(&m, regs); | |
| m.tsc = rdtsc(); | |
| final = this_cpu_ptr(&mces_seen); | |
| *final = m; | |
| memset(valid_banks, 0, sizeof(valid_banks)); | |
| no_way_out = mce_no_way_out(&m, &msg, valid_banks, regs); | |
| barrier(); | |
| /* | |
| * When no restart IP might need to kill or panic. | |
| * Assume the worst for now, but if we find the | |
| * severity is MCE_AR_SEVERITY we have other options. | |
| */ | |
| if (!(m.mcgstatus & MCG_STATUS_RIPV)) | |
| kill_it = 1; | |
| /* | |
| * Check if this MCE is signaled to only this logical processor, | |
| * on Intel only. | |
| */ | |
| if (m.cpuvendor == X86_VENDOR_INTEL) | |
| lmce = m.mcgstatus & MCG_STATUS_LMCES; | |
| /* | |
| * Local machine check may already know that we have to panic. | |
| * Broadcast machine check begins rendezvous in mce_start() | |
| * Go through all banks in exclusion of the other CPUs. This way we | |
| * don't report duplicated events on shared banks because the first one | |
| * to see it will clear it. | |
| */ | |
| if (lmce) { | |
| if (no_way_out) | |
| mce_panic("Fatal local machine check", &m, msg); | |
| } else { | |
| order = mce_start(&no_way_out); | |
| } | |
| __mc_scan_banks(&m, final, toclear, valid_banks, no_way_out, &worst); | |
| if (!no_way_out) | |
| mce_clear_state(toclear); | |
| /* | |
| * Do most of the synchronization with other CPUs. | |
| * When there's any problem use only local no_way_out state. | |
| */ | |
| if (!lmce) { | |
| if (mce_end(order) < 0) | |
| no_way_out = worst >= MCE_PANIC_SEVERITY; | |
| } else { | |
| /* | |
| * If there was a fatal machine check we should have | |
| * already called mce_panic earlier in this function. | |
| * Since we re-read the banks, we might have found | |
| * something new. Check again to see if we found a | |
| * fatal error. We call "mce_severity()" again to | |
| * make sure we have the right "msg". | |
| */ | |
| if (worst >= MCE_PANIC_SEVERITY && mca_cfg.tolerant < 3) { | |
| mce_severity(&m, cfg->tolerant, &msg, true); | |
| mce_panic("Local fatal machine check!", &m, msg); | |
| } | |
| } | |
| /* | |
| * If tolerant is at an insane level we drop requests to kill | |
| * processes and continue even when there is no way out. | |
| */ | |
| if (cfg->tolerant == 3) | |
| kill_it = 0; | |
| else if (no_way_out) | |
| mce_panic("Fatal machine check on current CPU", &m, msg); | |
| if (worst > 0) | |
| mce_report_event(regs); | |
| mce_wrmsrl(MSR_IA32_MCG_STATUS, 0); | |
| sync_core(); | |
| if (worst != MCE_AR_SEVERITY && !kill_it) | |
| goto out_ist; | |
| /* Fault was in user mode and we need to take some action */ | |
| if ((m.cs & 3) == 3) { | |
| ist_begin_non_atomic(regs); | |
| local_irq_enable(); | |
| if (kill_it || do_memory_failure(&m)) | |
| force_sig(SIGBUS, current); | |
| local_irq_disable(); | |
| ist_end_non_atomic(); | |
| } else { | |
| if (!fixup_exception(regs, X86_TRAP_MC)) | |
| mce_panic("Failed kernel mode recovery", &m, NULL); | |
| } | |
| out_ist: | |
| ist_exit(regs); | |
| } | |
| EXPORT_SYMBOL_GPL(do_machine_check); | |
| #ifndef CONFIG_MEMORY_FAILURE | |
| int memory_failure(unsigned long pfn, int flags) | |
| { | |
| /* mce_severity() should not hand us an ACTION_REQUIRED error */ | |
| BUG_ON(flags & MF_ACTION_REQUIRED); | |
| pr_err("Uncorrected memory error in page 0x%lx ignored\n" | |
| "Rebuild kernel with CONFIG_MEMORY_FAILURE=y for smarter handling\n", | |
| pfn); | |
| return 0; | |
| } | |
| #endif | |
| /* | |
| * Periodic polling timer for "silent" machine check errors. If the | |
| * poller finds an MCE, poll 2x faster. When the poller finds no more | |
| * errors, poll 2x slower (up to check_interval seconds). | |
| */ | |
| static unsigned long check_interval = INITIAL_CHECK_INTERVAL; | |
| static DEFINE_PER_CPU(unsigned long, mce_next_interval); /* in jiffies */ | |
| static DEFINE_PER_CPU(struct timer_list, mce_timer); | |
| static unsigned long mce_adjust_timer_default(unsigned long interval) | |
| { | |
| return interval; | |
| } | |
| static unsigned long (*mce_adjust_timer)(unsigned long interval) = mce_adjust_timer_default; | |
| static void __start_timer(struct timer_list *t, unsigned long interval) | |
| { | |
| unsigned long when = jiffies + interval; | |
| unsigned long flags; | |
| local_irq_save(flags); | |
| if (!timer_pending(t) || time_before(when, t->expires)) | |
| mod_timer(t, round_jiffies(when)); | |
| local_irq_restore(flags); | |
| } | |
| static void mce_timer_fn(struct timer_list *t) | |
| { | |
| struct timer_list *cpu_t = this_cpu_ptr(&mce_timer); | |
| unsigned long iv; | |
| WARN_ON(cpu_t != t); | |
| iv = __this_cpu_read(mce_next_interval); | |
| if (mce_available(this_cpu_ptr(&cpu_info))) { | |
| machine_check_poll(0, this_cpu_ptr(&mce_poll_banks)); | |
| if (mce_intel_cmci_poll()) { | |
| iv = mce_adjust_timer(iv); | |
| goto done; | |
| } | |
| } | |
| /* | |
| * Alert userspace if needed. If we logged an MCE, reduce the polling | |
| * interval, otherwise increase the polling interval. | |
| */ | |
| if (mce_notify_irq()) | |
| iv = max(iv / 2, (unsigned long) HZ/100); | |
| else | |
| iv = min(iv * 2, round_jiffies_relative(check_interval * HZ)); | |
| done: | |
| __this_cpu_write(mce_next_interval, iv); | |
| __start_timer(t, iv); | |
| } | |
| /* | |
| * Ensure that the timer is firing in @interval from now. | |
| */ | |
| void mce_timer_kick(unsigned long interval) | |
| { | |
| struct timer_list *t = this_cpu_ptr(&mce_timer); | |
| unsigned long iv = __this_cpu_read(mce_next_interval); | |
| __start_timer(t, interval); | |
| if (interval < iv) | |
| __this_cpu_write(mce_next_interval, interval); | |
| } | |
| /* Must not be called in IRQ context where del_timer_sync() can deadlock */ | |
| static void mce_timer_delete_all(void) | |
| { | |
| int cpu; | |
| for_each_online_cpu(cpu) | |
| del_timer_sync(&per_cpu(mce_timer, cpu)); | |
| } | |
| /* | |
| * Notify the user(s) about new machine check events. | |
| * Can be called from interrupt context, but not from machine check/NMI | |
| * context. | |
| */ | |
| int mce_notify_irq(void) | |
| { | |
| /* Not more than two messages every minute */ | |
| static DEFINE_RATELIMIT_STATE(ratelimit, 60*HZ, 2); | |
| if (test_and_clear_bit(0, &mce_need_notify)) { | |
| mce_work_trigger(); | |
| if (__ratelimit(&ratelimit)) | |
| pr_info(HW_ERR "Machine check events logged\n"); | |
| return 1; | |
| } | |
| return 0; | |
| } | |
| EXPORT_SYMBOL_GPL(mce_notify_irq); | |
| static int __mcheck_cpu_mce_banks_init(void) | |
| { | |
| int i; | |
| mce_banks = kcalloc(MAX_NR_BANKS, sizeof(struct mce_bank), GFP_KERNEL); | |
| if (!mce_banks) | |
| return -ENOMEM; | |
| for (i = 0; i < MAX_NR_BANKS; i++) { | |
| struct mce_bank *b = &mce_banks[i]; | |
| b->ctl = -1ULL; | |
| b->init = 1; | |
| } | |
| return 0; | |
| } | |
| /* | |
| * Initialize Machine Checks for a CPU. | |
| */ | |
| static int __mcheck_cpu_cap_init(void) | |
| { | |
| u64 cap; | |
| u8 b; | |
| rdmsrl(MSR_IA32_MCG_CAP, cap); | |
| b = cap & MCG_BANKCNT_MASK; | |
| if (WARN_ON_ONCE(b > MAX_NR_BANKS)) | |
| b = MAX_NR_BANKS; | |
| mca_cfg.banks = max(mca_cfg.banks, b); | |
| if (!mce_banks) { | |
| int err = __mcheck_cpu_mce_banks_init(); | |
| if (err) | |
| return err; | |
| } | |
| /* Use accurate RIP reporting if available. */ | |
| if ((cap & MCG_EXT_P) && MCG_EXT_CNT(cap) >= 9) | |
| mca_cfg.rip_msr = MSR_IA32_MCG_EIP; | |
| if (cap & MCG_SER_P) | |
| mca_cfg.ser = 1; | |
| return 0; | |
| } | |
| static void __mcheck_cpu_init_generic(void) | |
| { | |
| enum mcp_flags m_fl = 0; | |
| mce_banks_t all_banks; | |
| u64 cap; | |
| if (!mca_cfg.bootlog) | |
| m_fl = MCP_DONTLOG; | |
| /* | |
| * Log the machine checks left over from the previous reset. | |
| */ | |
| bitmap_fill(all_banks, MAX_NR_BANKS); | |
| machine_check_poll(MCP_UC | m_fl, &all_banks); | |
| cr4_set_bits(X86_CR4_MCE); | |
| rdmsrl(MSR_IA32_MCG_CAP, cap); | |
| if (cap & MCG_CTL_P) | |
| wrmsr(MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff); | |
| } | |
| static void __mcheck_cpu_init_clear_banks(void) | |
| { | |
| int i; | |
| for (i = 0; i < mca_cfg.banks; i++) { | |
| struct mce_bank *b = &mce_banks[i]; | |
| if (!b->init) | |
| continue; | |
| wrmsrl(msr_ops.ctl(i), b->ctl); | |
| wrmsrl(msr_ops.status(i), 0); | |
| } | |
| } | |
| /* | |
| * During IFU recovery Sandy Bridge -EP4S processors set the RIPV and | |
| * EIPV bits in MCG_STATUS to zero on the affected logical processor (SDM | |
| * Vol 3B Table 15-20). But this confuses both the code that determines | |
| * whether the machine check occurred in kernel or user mode, and also | |
| * the severity assessment code. Pretend that EIPV was set, and take the | |
| * ip/cs values from the pt_regs that mce_gather_info() ignored earlier. | |
| */ | |
| static void quirk_sandybridge_ifu(int bank, struct mce *m, struct pt_regs *regs) | |
| { | |
| if (bank != 0) | |
| return; | |
| if ((m->mcgstatus & (MCG_STATUS_EIPV|MCG_STATUS_RIPV)) != 0) | |
| return; | |
| if ((m->status & (MCI_STATUS_OVER|MCI_STATUS_UC| | |
| MCI_STATUS_EN|MCI_STATUS_MISCV|MCI_STATUS_ADDRV| | |
| MCI_STATUS_PCC|MCI_STATUS_S|MCI_STATUS_AR| | |
| MCACOD)) != | |
| (MCI_STATUS_UC|MCI_STATUS_EN| | |
| MCI_STATUS_MISCV|MCI_STATUS_ADDRV|MCI_STATUS_S| | |
| MCI_STATUS_AR|MCACOD_INSTR)) | |
| return; | |
| m->mcgstatus |= MCG_STATUS_EIPV; | |
| m->ip = regs->ip; | |
| m->cs = regs->cs; | |
| } | |
| /* Add per CPU specific workarounds here */ | |
| static int __mcheck_cpu_apply_quirks(struct cpuinfo_x86 *c) | |
| { | |
| struct mca_config *cfg = &mca_cfg; | |
| if (c->x86_vendor == X86_VENDOR_UNKNOWN) { | |
| pr_info("unknown CPU type - not enabling MCE support\n"); | |
| return -EOPNOTSUPP; | |
| } | |
| /* This should be disabled by the BIOS, but isn't always */ | |
| if (c->x86_vendor == X86_VENDOR_AMD) { | |
| if (c->x86 == 15 && cfg->banks > 4) { | |
| /* | |
| * disable GART TBL walk error reporting, which | |
| * trips off incorrectly with the IOMMU & 3ware | |
| * & Cerberus: | |
| */ | |
| clear_bit(10, (unsigned long *)&mce_banks[4].ctl); | |
| } | |
| if (c->x86 < 0x11 && cfg->bootlog < 0) { | |
| /* | |
| * Lots of broken BIOS around that don't clear them | |
| * by default and leave crap in there. Don't log: | |
| */ | |
| cfg->bootlog = 0; | |
| } | |
| /* | |
| * Various K7s with broken bank 0 around. Always disable | |
| * by default. | |
| */ | |
| if (c->x86 == 6 && cfg->banks > 0) | |
| mce_banks[0].ctl = 0; | |
| /* | |
| * overflow_recov is supported for F15h Models 00h-0fh | |
| * even though we don't have a CPUID bit for it. | |
| */ | |
| if (c->x86 == 0x15 && c->x86_model <= 0xf) | |
| mce_flags.overflow_recov = 1; | |
| } | |
| if (c->x86_vendor == X86_VENDOR_INTEL) { | |
| /* | |
| * SDM documents that on family 6 bank 0 should not be written | |
| * because it aliases to another special BIOS controlled | |
| * register. | |
| * But it's not aliased anymore on model 0x1a+ | |
| * Don't ignore bank 0 completely because there could be a | |
| * valid event later, merely don't write CTL0. | |
| */ | |
| if (c->x86 == 6 && c->x86_model < 0x1A && cfg->banks > 0) | |
| mce_banks[0].init = 0; | |
| /* | |
| * All newer Intel systems support MCE broadcasting. Enable | |
| * synchronization with a one second timeout. | |
| */ | |
| if ((c->x86 > 6 || (c->x86 == 6 && c->x86_model >= 0xe)) && | |
| cfg->monarch_timeout < 0) | |
| cfg->monarch_timeout = USEC_PER_SEC; | |
| /* | |
| * There are also broken BIOSes on some Pentium M and | |
| * earlier systems: | |
| */ | |
| if (c->x86 == 6 && c->x86_model <= 13 && cfg->bootlog < 0) | |
| cfg->bootlog = 0; | |
| if (c->x86 == 6 && c->x86_model == 45) | |
| quirk_no_way_out = quirk_sandybridge_ifu; | |
| } | |
| if (cfg->monarch_timeout < 0) | |
| cfg->monarch_timeout = 0; | |
| if (cfg->bootlog != 0) | |
| cfg->panic_timeout = 30; | |
| return 0; | |
| } | |
| static int __mcheck_cpu_ancient_init(struct cpuinfo_x86 *c) | |
| { | |
| if (c->x86 != 5) | |
| return 0; | |
| switch (c->x86_vendor) { | |
| case X86_VENDOR_INTEL: | |
| intel_p5_mcheck_init(c); | |
| return 1; | |
| break; | |
| case X86_VENDOR_CENTAUR: | |
| winchip_mcheck_init(c); | |
| return 1; | |
| break; | |
| default: | |
| return 0; | |
| } | |
| return 0; | |
| } | |
| /* | |
| * Init basic CPU features needed for early decoding of MCEs. | |
| */ | |
| static void __mcheck_cpu_init_early(struct cpuinfo_x86 *c) | |
| { | |
| if (c->x86_vendor == X86_VENDOR_AMD) { | |
| mce_flags.overflow_recov = !!cpu_has(c, X86_FEATURE_OVERFLOW_RECOV); | |
| mce_flags.succor = !!cpu_has(c, X86_FEATURE_SUCCOR); | |
| mce_flags.smca = !!cpu_has(c, X86_FEATURE_SMCA); | |
| if (mce_flags.smca) { | |
| msr_ops.ctl = smca_ctl_reg; | |
| msr_ops.status = smca_status_reg; | |
| msr_ops.addr = smca_addr_reg; | |
| msr_ops.misc = smca_misc_reg; | |
| } | |
| } | |
| } | |
| static void mce_centaur_feature_init(struct cpuinfo_x86 *c) | |
| { | |
| struct mca_config *cfg = &mca_cfg; | |
| /* | |
| * All newer Centaur CPUs support MCE broadcasting. Enable | |
| * synchronization with a one second timeout. | |
| */ | |
| if ((c->x86 == 6 && c->x86_model == 0xf && c->x86_stepping >= 0xe) || | |
| c->x86 > 6) { | |
| if (cfg->monarch_timeout < 0) | |
| cfg->monarch_timeout = USEC_PER_SEC; | |
| } | |
| } | |
| static void __mcheck_cpu_init_vendor(struct cpuinfo_x86 *c) | |
| { | |
| switch (c->x86_vendor) { | |
| case X86_VENDOR_INTEL: | |
| mce_intel_feature_init(c); | |
| mce_adjust_timer = cmci_intel_adjust_timer; | |
| break; | |
| case X86_VENDOR_AMD: { | |
| mce_amd_feature_init(c); | |
| break; | |
| } | |
| case X86_VENDOR_CENTAUR: | |
| mce_centaur_feature_init(c); | |
| break; | |
| default: | |
| break; | |
| } | |
| } | |
| static void __mcheck_cpu_clear_vendor(struct cpuinfo_x86 *c) | |
| { | |
| switch (c->x86_vendor) { | |
| case X86_VENDOR_INTEL: | |
| mce_intel_feature_clear(c); | |
| break; | |
| default: | |
| break; | |
| } | |
| } | |
| static void mce_start_timer(struct timer_list *t) | |
| { | |
| unsigned long iv = check_interval * HZ; | |
| if (mca_cfg.ignore_ce || !iv) | |
| return; | |
| this_cpu_write(mce_next_interval, iv); | |
| __start_timer(t, iv); | |
| } | |
| static void __mcheck_cpu_setup_timer(void) | |
| { | |
| struct timer_list *t = this_cpu_ptr(&mce_timer); | |
| timer_setup(t, mce_timer_fn, TIMER_PINNED); | |
| } | |
| static void __mcheck_cpu_init_timer(void) | |
| { | |
| struct timer_list *t = this_cpu_ptr(&mce_timer); | |
| timer_setup(t, mce_timer_fn, TIMER_PINNED); | |
| mce_start_timer(t); | |
| } | |
| /* Handle unconfigured int18 (should never happen) */ | |
| static void unexpected_machine_check(struct pt_regs *regs, long error_code) | |
| { | |
| pr_err("CPU#%d: Unexpected int18 (Machine Check)\n", | |
| smp_processor_id()); | |
| } | |
| /* Call the installed machine check handler for this CPU setup. */ | |
| void (*machine_check_vector)(struct pt_regs *, long error_code) = | |
| unexpected_machine_check; | |
| dotraplinkage void do_mce(struct pt_regs *regs, long error_code) | |
| { | |
| machine_check_vector(regs, error_code); | |
| } | |
| /* | |
| * Called for each booted CPU to set up machine checks. | |
| * Must be called with preempt off: | |
| */ | |
| void mcheck_cpu_init(struct cpuinfo_x86 *c) | |
| { | |
| if (mca_cfg.disabled) | |
| return; | |
| if (__mcheck_cpu_ancient_init(c)) | |
| return; | |
| if (!mce_available(c)) | |
| return; | |
| if (__mcheck_cpu_cap_init() < 0 || __mcheck_cpu_apply_quirks(c) < 0) { | |
| mca_cfg.disabled = 1; | |
| return; | |
| } | |
| if (mce_gen_pool_init()) { | |
| mca_cfg.disabled = 1; | |
| pr_emerg("Couldn't allocate MCE records pool!\n"); | |
| return; | |
| } | |
| machine_check_vector = do_machine_check; | |
| __mcheck_cpu_init_early(c); | |
| __mcheck_cpu_init_generic(); | |
| __mcheck_cpu_init_vendor(c); | |
| __mcheck_cpu_init_clear_banks(); | |
| __mcheck_cpu_setup_timer(); | |
| } | |
| /* | |
| * Called for each booted CPU to clear some machine checks opt-ins | |
| */ | |
| void mcheck_cpu_clear(struct cpuinfo_x86 *c) | |
| { | |
| if (mca_cfg.disabled) | |
| return; | |
| if (!mce_available(c)) | |
| return; | |
| /* | |
| * Possibly to clear general settings generic to x86 | |
| * __mcheck_cpu_clear_generic(c); | |
| */ | |
| __mcheck_cpu_clear_vendor(c); | |
| } | |
| static void __mce_disable_bank(void *arg) | |
| { | |
| int bank = *((int *)arg); | |
| __clear_bit(bank, this_cpu_ptr(mce_poll_banks)); | |
| cmci_disable_bank(bank); | |
| } | |
| void mce_disable_bank(int bank) | |
| { | |
| if (bank >= mca_cfg.banks) { | |
| pr_warn(FW_BUG | |
| "Ignoring request to disable invalid MCA bank %d.\n", | |
| bank); | |
| return; | |
| } | |
| set_bit(bank, mce_banks_ce_disabled); | |
| on_each_cpu(__mce_disable_bank, &bank, 1); | |
| } | |
| /* | |
| * mce=off Disables machine check | |
| * mce=no_cmci Disables CMCI | |
| * mce=no_lmce Disables LMCE | |
| * mce=dont_log_ce Clears corrected events silently, no log created for CEs. | |
| * mce=ignore_ce Disables polling and CMCI, corrected events are not cleared. | |
| * mce=TOLERANCELEVEL[,monarchtimeout] (number, see above) | |
| * monarchtimeout is how long to wait for other CPUs on machine | |
| * check, or 0 to not wait | |
| * mce=bootlog Log MCEs from before booting. Disabled by default on AMD Fam10h | |
| and older. | |
| * mce=nobootlog Don't log MCEs from before booting. | |
| * mce=bios_cmci_threshold Don't program the CMCI threshold | |
| * mce=recovery force enable memcpy_mcsafe() | |
| */ | |
| static int __init mcheck_enable(char *str) | |
| { | |
| struct mca_config *cfg = &mca_cfg; | |
| if (*str == 0) { | |
| enable_p5_mce(); | |
| return 1; | |
| } | |
| if (*str == '=') | |
| str++; | |
| if (!strcmp(str, "off")) | |
| cfg->disabled = 1; | |
| else if (!strcmp(str, "no_cmci")) | |
| cfg->cmci_disabled = true; | |
| else if (!strcmp(str, "no_lmce")) | |
| cfg->lmce_disabled = 1; | |
| else if (!strcmp(str, "dont_log_ce")) | |
| cfg->dont_log_ce = true; | |
| else if (!strcmp(str, "ignore_ce")) | |
| cfg->ignore_ce = true; | |
| else if (!strcmp(str, "bootlog") || !strcmp(str, "nobootlog")) | |
| cfg->bootlog = (str[0] == 'b'); | |
| else if (!strcmp(str, "bios_cmci_threshold")) | |
| cfg->bios_cmci_threshold = 1; | |
| else if (!strcmp(str, "recovery")) | |
| cfg->recovery = 1; | |
| else if (isdigit(str[0])) { | |
| if (get_option(&str, &cfg->tolerant) == 2) | |
| get_option(&str, &(cfg->monarch_timeout)); | |
| } else { | |
| pr_info("mce argument %s ignored. Please use /sys\n", str); | |
| return 0; | |
| } | |
| return 1; | |
| } | |
| __setup("mce", mcheck_enable); | |
| int __init mcheck_init(void) | |
| { | |
| mcheck_intel_therm_init(); | |
| mce_register_decode_chain(&first_nb); | |
| mce_register_decode_chain(&mce_srao_nb); | |
| mce_register_decode_chain(&mce_default_nb); | |
| mcheck_vendor_init_severity(); | |
| INIT_WORK(&mce_work, mce_gen_pool_process); | |
| init_irq_work(&mce_irq_work, mce_irq_work_cb); | |
| return 0; | |
| } | |
| /* | |
| * mce_syscore: PM support | |
| */ | |
| /* | |
| * Disable machine checks on suspend and shutdown. We can't really handle | |
| * them later. | |
| */ | |
| static void mce_disable_error_reporting(void) | |
| { | |
| int i; | |
| for (i = 0; i < mca_cfg.banks; i++) { | |
| struct mce_bank *b = &mce_banks[i]; | |
| if (b->init) | |
| wrmsrl(msr_ops.ctl(i), 0); | |
| } | |
| return; | |
| } | |
| static void vendor_disable_error_reporting(void) | |
| { | |
| /* | |
| * Don't clear on Intel or AMD CPUs. Some of these MSRs are socket-wide. | |
| * Disabling them for just a single offlined CPU is bad, since it will | |
| * inhibit reporting for all shared resources on the socket like the | |
| * last level cache (LLC), the integrated memory controller (iMC), etc. | |
| */ | |
| if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL || | |
| boot_cpu_data.x86_vendor == X86_VENDOR_AMD) | |
| return; | |
| mce_disable_error_reporting(); | |
| } | |
| static int mce_syscore_suspend(void) | |
| { | |
| vendor_disable_error_reporting(); | |
| return 0; | |
| } | |
| static void mce_syscore_shutdown(void) | |
| { | |
| vendor_disable_error_reporting(); | |
| } | |
| /* | |
| * On resume clear all MCE state. Don't want to see leftovers from the BIOS. | |
| * Only one CPU is active at this time, the others get re-added later using | |
| * CPU hotplug: | |
| */ | |
| static void mce_syscore_resume(void) | |
| { | |
| __mcheck_cpu_init_generic(); | |
| __mcheck_cpu_init_vendor(raw_cpu_ptr(&cpu_info)); | |
| __mcheck_cpu_init_clear_banks(); | |
| } | |
| static struct syscore_ops mce_syscore_ops = { | |
| .suspend = mce_syscore_suspend, | |
| .shutdown = mce_syscore_shutdown, | |
| .resume = mce_syscore_resume, | |
| }; | |
| /* | |
| * mce_device: Sysfs support | |
| */ | |
| static void mce_cpu_restart(void *data) | |
| { | |
| if (!mce_available(raw_cpu_ptr(&cpu_info))) | |
| return; | |
| __mcheck_cpu_init_generic(); | |
| __mcheck_cpu_init_clear_banks(); | |
| __mcheck_cpu_init_timer(); | |
| } | |
| /* Reinit MCEs after user configuration changes */ | |
| static void mce_restart(void) | |
| { | |
| mce_timer_delete_all(); | |
| on_each_cpu(mce_cpu_restart, NULL, 1); | |
| } | |
| /* Toggle features for corrected errors */ | |
| static void mce_disable_cmci(void *data) | |
| { | |
| if (!mce_available(raw_cpu_ptr(&cpu_info))) | |
| return; | |
| cmci_clear(); | |
| } | |
| static void mce_enable_ce(void *all) | |
| { | |
| if (!mce_available(raw_cpu_ptr(&cpu_info))) | |
| return; | |
| cmci_reenable(); | |
| cmci_recheck(); | |
| if (all) | |
| __mcheck_cpu_init_timer(); | |
| } | |
| static struct bus_type mce_subsys = { | |
| .name = "machinecheck", | |
| .dev_name = "machinecheck", | |
| }; | |
| DEFINE_PER_CPU(struct device *, mce_device); | |
| static inline struct mce_bank *attr_to_bank(struct device_attribute *attr) | |
| { | |
| return container_of(attr, struct mce_bank, attr); | |
| } | |
| static ssize_t show_bank(struct device *s, struct device_attribute *attr, | |
| char *buf) | |
| { | |
| return sprintf(buf, "%llx\n", attr_to_bank(attr)->ctl); | |
| } | |
| static ssize_t set_bank(struct device *s, struct device_attribute *attr, | |
| const char *buf, size_t size) | |
| { | |
| u64 new; | |
| if (kstrtou64(buf, 0, &new) < 0) | |
| return -EINVAL; | |
| attr_to_bank(attr)->ctl = new; | |
| mce_restart(); | |
| return size; | |
| } | |
| static ssize_t set_ignore_ce(struct device *s, | |
| struct device_attribute *attr, | |
| const char *buf, size_t size) | |
| { | |
| u64 new; | |
| if (kstrtou64(buf, 0, &new) < 0) | |
| return -EINVAL; | |
| mutex_lock(&mce_sysfs_mutex); | |
| if (mca_cfg.ignore_ce ^ !!new) { | |
| if (new) { | |
| /* disable ce features */ | |
| mce_timer_delete_all(); | |
| on_each_cpu(mce_disable_cmci, NULL, 1); | |
| mca_cfg.ignore_ce = true; | |
| } else { | |
| /* enable ce features */ | |
| mca_cfg.ignore_ce = false; | |
| on_each_cpu(mce_enable_ce, (void *)1, 1); | |
| } | |
| } | |
| mutex_unlock(&mce_sysfs_mutex); | |
| return size; | |
| } | |
| static ssize_t set_cmci_disabled(struct device *s, | |
| struct device_attribute *attr, | |
| const char *buf, size_t size) | |
| { | |
| u64 new; | |
| if (kstrtou64(buf, 0, &new) < 0) | |
| return -EINVAL; | |
| mutex_lock(&mce_sysfs_mutex); | |
| if (mca_cfg.cmci_disabled ^ !!new) { | |
| if (new) { | |
| /* disable cmci */ | |
| on_each_cpu(mce_disable_cmci, NULL, 1); | |
| mca_cfg.cmci_disabled = true; | |
| } else { | |
| /* enable cmci */ | |
| mca_cfg.cmci_disabled = false; | |
| on_each_cpu(mce_enable_ce, NULL, 1); | |
| } | |
| } | |
| mutex_unlock(&mce_sysfs_mutex); | |
| return size; | |
| } | |
| static ssize_t store_int_with_restart(struct device *s, | |
| struct device_attribute *attr, | |
| const char *buf, size_t size) | |
| { | |
| unsigned long old_check_interval = check_interval; | |
| ssize_t ret = device_store_ulong(s, attr, buf, size); | |
| if (check_interval == old_check_interval) | |
| return ret; | |
| mutex_lock(&mce_sysfs_mutex); | |
| mce_restart(); | |
| mutex_unlock(&mce_sysfs_mutex); | |
| return ret; | |
| } | |
| static DEVICE_INT_ATTR(tolerant, 0644, mca_cfg.tolerant); | |
| static DEVICE_INT_ATTR(monarch_timeout, 0644, mca_cfg.monarch_timeout); | |
| static DEVICE_BOOL_ATTR(dont_log_ce, 0644, mca_cfg.dont_log_ce); | |
| static struct dev_ext_attribute dev_attr_check_interval = { | |
| __ATTR(check_interval, 0644, device_show_int, store_int_with_restart), | |
| &check_interval | |
| }; | |
| static struct dev_ext_attribute dev_attr_ignore_ce = { | |
| __ATTR(ignore_ce, 0644, device_show_bool, set_ignore_ce), | |
| &mca_cfg.ignore_ce | |
| }; | |
| static struct dev_ext_attribute dev_attr_cmci_disabled = { | |
| __ATTR(cmci_disabled, 0644, device_show_bool, set_cmci_disabled), | |
| &mca_cfg.cmci_disabled | |
| }; | |
| static struct device_attribute *mce_device_attrs[] = { | |
| &dev_attr_tolerant.attr, | |
| &dev_attr_check_interval.attr, | |
| #ifdef CONFIG_X86_MCELOG_LEGACY | |
| &dev_attr_trigger, | |
| #endif | |
| &dev_attr_monarch_timeout.attr, | |
| &dev_attr_dont_log_ce.attr, | |
| &dev_attr_ignore_ce.attr, | |
| &dev_attr_cmci_disabled.attr, | |
| NULL | |
| }; | |
| static cpumask_var_t mce_device_initialized; | |
| static void mce_device_release(struct device *dev) | |
| { | |
| kfree(dev); | |
| } | |
| /* Per cpu device init. All of the cpus still share the same ctrl bank: */ | |
| static int mce_device_create(unsigned int cpu) | |
| { | |
| struct device *dev; | |
| int err; | |
| int i, j; | |
| if (!mce_available(&boot_cpu_data)) | |
| return -EIO; | |
| dev = per_cpu(mce_device, cpu); | |
| if (dev) | |
| return 0; | |
| dev = kzalloc(sizeof *dev, GFP_KERNEL); | |
| if (!dev) | |
| return -ENOMEM; | |
| dev->id = cpu; | |
| dev->bus = &mce_subsys; | |
| dev->release = &mce_device_release; | |
| err = device_register(dev); | |
| if (err) { | |
| put_device(dev); | |
| return err; | |
| } | |
| for (i = 0; mce_device_attrs[i]; i++) { | |
| err = device_create_file(dev, mce_device_attrs[i]); | |
| if (err) | |
| goto error; | |
| } | |
| for (j = 0; j < mca_cfg.banks; j++) { | |
| err = device_create_file(dev, &mce_banks[j].attr); | |
| if (err) | |
| goto error2; | |
| } | |
| cpumask_set_cpu(cpu, mce_device_initialized); | |
| per_cpu(mce_device, cpu) = dev; | |
| return 0; | |
| error2: | |
| while (--j >= 0) | |
| device_remove_file(dev, &mce_banks[j].attr); | |
| error: | |
| while (--i >= 0) | |
| device_remove_file(dev, mce_device_attrs[i]); | |
| device_unregister(dev); | |
| return err; | |
| } | |
| static void mce_device_remove(unsigned int cpu) | |
| { | |
| struct device *dev = per_cpu(mce_device, cpu); | |
| int i; | |
| if (!cpumask_test_cpu(cpu, mce_device_initialized)) | |
| return; | |
| for (i = 0; mce_device_attrs[i]; i++) | |
| device_remove_file(dev, mce_device_attrs[i]); | |
| for (i = 0; i < mca_cfg.banks; i++) | |
| device_remove_file(dev, &mce_banks[i].attr); | |
| device_unregister(dev); | |
| cpumask_clear_cpu(cpu, mce_device_initialized); | |
| per_cpu(mce_device, cpu) = NULL; | |
| } | |
| /* Make sure there are no machine checks on offlined CPUs. */ | |
| static void mce_disable_cpu(void) | |
| { | |
| if (!mce_available(raw_cpu_ptr(&cpu_info))) | |
| return; | |
| if (!cpuhp_tasks_frozen) | |
| cmci_clear(); | |
| vendor_disable_error_reporting(); | |
| } | |
| static void mce_reenable_cpu(void) | |
| { | |
| int i; | |
| if (!mce_available(raw_cpu_ptr(&cpu_info))) | |
| return; | |
| if (!cpuhp_tasks_frozen) | |
| cmci_reenable(); | |
| for (i = 0; i < mca_cfg.banks; i++) { | |
| struct mce_bank *b = &mce_banks[i]; | |
| if (b->init) | |
| wrmsrl(msr_ops.ctl(i), b->ctl); | |
| } | |
| } | |
| static int mce_cpu_dead(unsigned int cpu) | |
| { | |
| mce_intel_hcpu_update(cpu); | |
| /* intentionally ignoring frozen here */ | |
| if (!cpuhp_tasks_frozen) | |
| cmci_rediscover(); | |
| return 0; | |
| } | |
| static int mce_cpu_online(unsigned int cpu) | |
| { | |
| struct timer_list *t = this_cpu_ptr(&mce_timer); | |
| int ret; | |
| mce_device_create(cpu); | |
| ret = mce_threshold_create_device(cpu); | |
| if (ret) { | |
| mce_device_remove(cpu); | |
| return ret; | |
| } | |
| mce_reenable_cpu(); | |
| mce_start_timer(t); | |
| return 0; | |
| } | |
| static int mce_cpu_pre_down(unsigned int cpu) | |
| { | |
| struct timer_list *t = this_cpu_ptr(&mce_timer); | |
| mce_disable_cpu(); | |
| del_timer_sync(t); | |
| mce_threshold_remove_device(cpu); | |
| mce_device_remove(cpu); | |
| return 0; | |
| } | |
| static __init void mce_init_banks(void) | |
| { | |
| int i; | |
| for (i = 0; i < mca_cfg.banks; i++) { | |
| struct mce_bank *b = &mce_banks[i]; | |
| struct device_attribute *a = &b->attr; | |
| sysfs_attr_init(&a->attr); | |
| a->attr.name = b->attrname; | |
| snprintf(b->attrname, ATTR_LEN, "bank%d", i); | |
| a->attr.mode = 0644; | |
| a->show = show_bank; | |
| a->store = set_bank; | |
| } | |
| } | |
| static __init int mcheck_init_device(void) | |
| { | |
| int err; | |
| /* | |
| * Check if we have a spare virtual bit. This will only become | |
| * a problem if/when we move beyond 5-level page tables. | |
| */ | |
| MAYBE_BUILD_BUG_ON(__VIRTUAL_MASK_SHIFT >= 63); | |
| if (!mce_available(&boot_cpu_data)) { | |
| err = -EIO; | |
| goto err_out; | |
| } | |
| if (!zalloc_cpumask_var(&mce_device_initialized, GFP_KERNEL)) { | |
| err = -ENOMEM; | |
| goto err_out; | |
| } | |
| mce_init_banks(); | |
| err = subsys_system_register(&mce_subsys, NULL); | |
| if (err) | |
| goto err_out_mem; | |
| err = cpuhp_setup_state(CPUHP_X86_MCE_DEAD, "x86/mce:dead", NULL, | |
| mce_cpu_dead); | |
| if (err) | |
| goto err_out_mem; | |
| err = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "x86/mce:online", | |
| mce_cpu_online, mce_cpu_pre_down); | |
| if (err < 0) | |
| goto err_out_online; | |
| register_syscore_ops(&mce_syscore_ops); | |
| return 0; | |
| err_out_online: | |
| cpuhp_remove_state(CPUHP_X86_MCE_DEAD); | |
| err_out_mem: | |
| free_cpumask_var(mce_device_initialized); | |
| err_out: | |
| pr_err("Unable to init MCE device (rc: %d)\n", err); | |
| return err; | |
| } | |
| device_initcall_sync(mcheck_init_device); | |
| /* | |
| * Old style boot options parsing. Only for compatibility. | |
| */ | |
| static int __init mcheck_disable(char *str) | |
| { | |
| mca_cfg.disabled = 1; | |
| return 1; | |
| } | |
| __setup("nomce", mcheck_disable); | |
| #ifdef CONFIG_DEBUG_FS | |
| struct dentry *mce_get_debugfs_dir(void) | |
| { | |
| static struct dentry *dmce; | |
| if (!dmce) | |
| dmce = debugfs_create_dir("mce", NULL); | |
| return dmce; | |
| } | |
| static void mce_reset(void) | |
| { | |
| cpu_missing = 0; | |
| atomic_set(&mce_fake_panicked, 0); | |
| atomic_set(&mce_executing, 0); | |
| atomic_set(&mce_callin, 0); | |
| atomic_set(&global_nwo, 0); | |
| } | |
| static int fake_panic_get(void *data, u64 *val) | |
| { | |
| *val = fake_panic; | |
| return 0; | |
| } | |
| static int fake_panic_set(void *data, u64 val) | |
| { | |
| mce_reset(); | |
| fake_panic = val; | |
| return 0; | |
| } | |
| DEFINE_SIMPLE_ATTRIBUTE(fake_panic_fops, fake_panic_get, | |
| fake_panic_set, "%llu\n"); | |
| static int __init mcheck_debugfs_init(void) | |
| { | |
| struct dentry *dmce, *ffake_panic; | |
| dmce = mce_get_debugfs_dir(); | |
| if (!dmce) | |
| return -ENOMEM; | |
| ffake_panic = debugfs_create_file("fake_panic", 0444, dmce, NULL, | |
| &fake_panic_fops); | |
| if (!ffake_panic) | |
| return -ENOMEM; | |
| return 0; | |
| } | |
| #else | |
| static int __init mcheck_debugfs_init(void) { return -EINVAL; } | |
| #endif | |
| DEFINE_STATIC_KEY_FALSE(mcsafe_key); | |
| EXPORT_SYMBOL_GPL(mcsafe_key); | |
| static int __init mcheck_late_init(void) | |
| { | |
| pr_info("Using %d MCE banks\n", mca_cfg.banks); | |
| if (mca_cfg.recovery) | |
| static_branch_inc(&mcsafe_key); | |
| mcheck_debugfs_init(); | |
| cec_init(); | |
| /* | |
| * Flush out everything that has been logged during early boot, now that | |
| * everything has been initialized (workqueues, decoders, ...). | |
| */ | |
| mce_schedule_work(); | |
| return 0; | |
| } | |
| late_initcall(mcheck_late_init); |