|  | /* | 
|  | * Copyright 2002-2005, Instant802 Networks, Inc. | 
|  | * Copyright 2005-2006, Devicescape Software, Inc. | 
|  | * Copyright 2006-2007	Jiri Benc <jbenc@suse.cz> | 
|  | * Copyright 2007	Johannes Berg <johannes@sipsolutions.net> | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License version 2 as | 
|  | * published by the Free Software Foundation. | 
|  | */ | 
|  |  | 
|  | #include <linux/jiffies.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/skbuff.h> | 
|  | #include <linux/netdevice.h> | 
|  | #include <linux/etherdevice.h> | 
|  | #include <linux/rcupdate.h> | 
|  | #include <net/mac80211.h> | 
|  | #include <net/ieee80211_radiotap.h> | 
|  |  | 
|  | #include "ieee80211_i.h" | 
|  | #include "led.h" | 
|  | #include "mesh.h" | 
|  | #include "wep.h" | 
|  | #include "wpa.h" | 
|  | #include "tkip.h" | 
|  | #include "wme.h" | 
|  |  | 
|  | static u8 ieee80211_sta_manage_reorder_buf(struct ieee80211_hw *hw, | 
|  | struct tid_ampdu_rx *tid_agg_rx, | 
|  | struct sk_buff *skb, | 
|  | u16 mpdu_seq_num, | 
|  | int bar_req); | 
|  | /* | 
|  | * monitor mode reception | 
|  | * | 
|  | * This function cleans up the SKB, i.e. it removes all the stuff | 
|  | * only useful for monitoring. | 
|  | */ | 
|  | static struct sk_buff *remove_monitor_info(struct ieee80211_local *local, | 
|  | struct sk_buff *skb, | 
|  | int rtap_len) | 
|  | { | 
|  | skb_pull(skb, rtap_len); | 
|  |  | 
|  | if (local->hw.flags & IEEE80211_HW_RX_INCLUDES_FCS) { | 
|  | if (likely(skb->len > FCS_LEN)) | 
|  | skb_trim(skb, skb->len - FCS_LEN); | 
|  | else { | 
|  | /* driver bug */ | 
|  | WARN_ON(1); | 
|  | dev_kfree_skb(skb); | 
|  | skb = NULL; | 
|  | } | 
|  | } | 
|  |  | 
|  | return skb; | 
|  | } | 
|  |  | 
|  | static inline int should_drop_frame(struct ieee80211_rx_status *status, | 
|  | struct sk_buff *skb, | 
|  | int present_fcs_len, | 
|  | int radiotap_len) | 
|  | { | 
|  | struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; | 
|  |  | 
|  | if (status->flag & (RX_FLAG_FAILED_FCS_CRC | RX_FLAG_FAILED_PLCP_CRC)) | 
|  | return 1; | 
|  | if (unlikely(skb->len < 16 + present_fcs_len + radiotap_len)) | 
|  | return 1; | 
|  | if (ieee80211_is_ctl(hdr->frame_control) && | 
|  | !ieee80211_is_pspoll(hdr->frame_control) && | 
|  | !ieee80211_is_back_req(hdr->frame_control)) | 
|  | return 1; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int | 
|  | ieee80211_rx_radiotap_len(struct ieee80211_local *local, | 
|  | struct ieee80211_rx_status *status) | 
|  | { | 
|  | int len; | 
|  |  | 
|  | /* always present fields */ | 
|  | len = sizeof(struct ieee80211_radiotap_header) + 9; | 
|  |  | 
|  | if (status->flag & RX_FLAG_TSFT) | 
|  | len += 8; | 
|  | if (local->hw.flags & IEEE80211_HW_SIGNAL_DBM) | 
|  | len += 1; | 
|  | if (local->hw.flags & IEEE80211_HW_NOISE_DBM) | 
|  | len += 1; | 
|  |  | 
|  | if (len & 1) /* padding for RX_FLAGS if necessary */ | 
|  | len++; | 
|  |  | 
|  | /* make sure radiotap starts at a naturally aligned address */ | 
|  | if (len % 8) | 
|  | len = roundup(len, 8); | 
|  |  | 
|  | return len; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * ieee80211_add_rx_radiotap_header - add radiotap header | 
|  | * | 
|  | * add a radiotap header containing all the fields which the hardware provided. | 
|  | */ | 
|  | static void | 
|  | ieee80211_add_rx_radiotap_header(struct ieee80211_local *local, | 
|  | struct sk_buff *skb, | 
|  | struct ieee80211_rx_status *status, | 
|  | struct ieee80211_rate *rate, | 
|  | int rtap_len) | 
|  | { | 
|  | struct ieee80211_radiotap_header *rthdr; | 
|  | unsigned char *pos; | 
|  |  | 
|  | rthdr = (struct ieee80211_radiotap_header *)skb_push(skb, rtap_len); | 
|  | memset(rthdr, 0, rtap_len); | 
|  |  | 
|  | /* radiotap header, set always present flags */ | 
|  | rthdr->it_present = | 
|  | cpu_to_le32((1 << IEEE80211_RADIOTAP_FLAGS) | | 
|  | (1 << IEEE80211_RADIOTAP_CHANNEL) | | 
|  | (1 << IEEE80211_RADIOTAP_ANTENNA) | | 
|  | (1 << IEEE80211_RADIOTAP_RX_FLAGS)); | 
|  | rthdr->it_len = cpu_to_le16(rtap_len); | 
|  |  | 
|  | pos = (unsigned char *)(rthdr+1); | 
|  |  | 
|  | /* the order of the following fields is important */ | 
|  |  | 
|  | /* IEEE80211_RADIOTAP_TSFT */ | 
|  | if (status->flag & RX_FLAG_TSFT) { | 
|  | *(__le64 *)pos = cpu_to_le64(status->mactime); | 
|  | rthdr->it_present |= | 
|  | cpu_to_le32(1 << IEEE80211_RADIOTAP_TSFT); | 
|  | pos += 8; | 
|  | } | 
|  |  | 
|  | /* IEEE80211_RADIOTAP_FLAGS */ | 
|  | if (local->hw.flags & IEEE80211_HW_RX_INCLUDES_FCS) | 
|  | *pos |= IEEE80211_RADIOTAP_F_FCS; | 
|  | if (status->flag & RX_FLAG_SHORTPRE) | 
|  | *pos |= IEEE80211_RADIOTAP_F_SHORTPRE; | 
|  | pos++; | 
|  |  | 
|  | /* IEEE80211_RADIOTAP_RATE */ | 
|  | if (status->flag & RX_FLAG_HT) { | 
|  | /* | 
|  | * TODO: add following information into radiotap header once | 
|  | * suitable fields are defined for it: | 
|  | * - MCS index (status->rate_idx) | 
|  | * - HT40 (status->flag & RX_FLAG_40MHZ) | 
|  | * - short-GI (status->flag & RX_FLAG_SHORT_GI) | 
|  | */ | 
|  | *pos = 0; | 
|  | } else { | 
|  | rthdr->it_present |= cpu_to_le32(1 << IEEE80211_RADIOTAP_RATE); | 
|  | *pos = rate->bitrate / 5; | 
|  | } | 
|  | pos++; | 
|  |  | 
|  | /* IEEE80211_RADIOTAP_CHANNEL */ | 
|  | *(__le16 *)pos = cpu_to_le16(status->freq); | 
|  | pos += 2; | 
|  | if (status->band == IEEE80211_BAND_5GHZ) | 
|  | *(__le16 *)pos = cpu_to_le16(IEEE80211_CHAN_OFDM | | 
|  | IEEE80211_CHAN_5GHZ); | 
|  | else if (rate->flags & IEEE80211_RATE_ERP_G) | 
|  | *(__le16 *)pos = cpu_to_le16(IEEE80211_CHAN_OFDM | | 
|  | IEEE80211_CHAN_2GHZ); | 
|  | else | 
|  | *(__le16 *)pos = cpu_to_le16(IEEE80211_CHAN_CCK | | 
|  | IEEE80211_CHAN_2GHZ); | 
|  | pos += 2; | 
|  |  | 
|  | /* IEEE80211_RADIOTAP_DBM_ANTSIGNAL */ | 
|  | if (local->hw.flags & IEEE80211_HW_SIGNAL_DBM) { | 
|  | *pos = status->signal; | 
|  | rthdr->it_present |= | 
|  | cpu_to_le32(1 << IEEE80211_RADIOTAP_DBM_ANTSIGNAL); | 
|  | pos++; | 
|  | } | 
|  |  | 
|  | /* IEEE80211_RADIOTAP_DBM_ANTNOISE */ | 
|  | if (local->hw.flags & IEEE80211_HW_NOISE_DBM) { | 
|  | *pos = status->noise; | 
|  | rthdr->it_present |= | 
|  | cpu_to_le32(1 << IEEE80211_RADIOTAP_DBM_ANTNOISE); | 
|  | pos++; | 
|  | } | 
|  |  | 
|  | /* IEEE80211_RADIOTAP_LOCK_QUALITY is missing */ | 
|  |  | 
|  | /* IEEE80211_RADIOTAP_ANTENNA */ | 
|  | *pos = status->antenna; | 
|  | pos++; | 
|  |  | 
|  | /* IEEE80211_RADIOTAP_DB_ANTNOISE is not used */ | 
|  |  | 
|  | /* IEEE80211_RADIOTAP_RX_FLAGS */ | 
|  | /* ensure 2 byte alignment for the 2 byte field as required */ | 
|  | if ((pos - (unsigned char *)rthdr) & 1) | 
|  | pos++; | 
|  | /* FIXME: when radiotap gets a 'bad PLCP' flag use it here */ | 
|  | if (status->flag & (RX_FLAG_FAILED_FCS_CRC | RX_FLAG_FAILED_PLCP_CRC)) | 
|  | *(__le16 *)pos |= cpu_to_le16(IEEE80211_RADIOTAP_F_RX_BADFCS); | 
|  | pos += 2; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This function copies a received frame to all monitor interfaces and | 
|  | * returns a cleaned-up SKB that no longer includes the FCS nor the | 
|  | * radiotap header the driver might have added. | 
|  | */ | 
|  | static struct sk_buff * | 
|  | ieee80211_rx_monitor(struct ieee80211_local *local, struct sk_buff *origskb, | 
|  | struct ieee80211_rx_status *status, | 
|  | struct ieee80211_rate *rate) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata; | 
|  | int needed_headroom = 0; | 
|  | struct sk_buff *skb, *skb2; | 
|  | struct net_device *prev_dev = NULL; | 
|  | int present_fcs_len = 0; | 
|  | int rtap_len = 0; | 
|  |  | 
|  | /* | 
|  | * First, we may need to make a copy of the skb because | 
|  | *  (1) we need to modify it for radiotap (if not present), and | 
|  | *  (2) the other RX handlers will modify the skb we got. | 
|  | * | 
|  | * We don't need to, of course, if we aren't going to return | 
|  | * the SKB because it has a bad FCS/PLCP checksum. | 
|  | */ | 
|  | if (status->flag & RX_FLAG_RADIOTAP) | 
|  | rtap_len = ieee80211_get_radiotap_len(origskb->data); | 
|  | else | 
|  | /* room for the radiotap header based on driver features */ | 
|  | needed_headroom = ieee80211_rx_radiotap_len(local, status); | 
|  |  | 
|  | if (local->hw.flags & IEEE80211_HW_RX_INCLUDES_FCS) | 
|  | present_fcs_len = FCS_LEN; | 
|  |  | 
|  | if (!local->monitors) { | 
|  | if (should_drop_frame(status, origskb, present_fcs_len, | 
|  | rtap_len)) { | 
|  | dev_kfree_skb(origskb); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | return remove_monitor_info(local, origskb, rtap_len); | 
|  | } | 
|  |  | 
|  | if (should_drop_frame(status, origskb, present_fcs_len, rtap_len)) { | 
|  | /* only need to expand headroom if necessary */ | 
|  | skb = origskb; | 
|  | origskb = NULL; | 
|  |  | 
|  | /* | 
|  | * This shouldn't trigger often because most devices have an | 
|  | * RX header they pull before we get here, and that should | 
|  | * be big enough for our radiotap information. We should | 
|  | * probably export the length to drivers so that we can have | 
|  | * them allocate enough headroom to start with. | 
|  | */ | 
|  | if (skb_headroom(skb) < needed_headroom && | 
|  | pskb_expand_head(skb, needed_headroom, 0, GFP_ATOMIC)) { | 
|  | dev_kfree_skb(skb); | 
|  | return NULL; | 
|  | } | 
|  | } else { | 
|  | /* | 
|  | * Need to make a copy and possibly remove radiotap header | 
|  | * and FCS from the original. | 
|  | */ | 
|  | skb = skb_copy_expand(origskb, needed_headroom, 0, GFP_ATOMIC); | 
|  |  | 
|  | origskb = remove_monitor_info(local, origskb, rtap_len); | 
|  |  | 
|  | if (!skb) | 
|  | return origskb; | 
|  | } | 
|  |  | 
|  | /* if necessary, prepend radiotap information */ | 
|  | if (!(status->flag & RX_FLAG_RADIOTAP)) | 
|  | ieee80211_add_rx_radiotap_header(local, skb, status, rate, | 
|  | needed_headroom); | 
|  |  | 
|  | skb_reset_mac_header(skb); | 
|  | skb->ip_summed = CHECKSUM_UNNECESSARY; | 
|  | skb->pkt_type = PACKET_OTHERHOST; | 
|  | skb->protocol = htons(ETH_P_802_2); | 
|  |  | 
|  | list_for_each_entry_rcu(sdata, &local->interfaces, list) { | 
|  | if (!netif_running(sdata->dev)) | 
|  | continue; | 
|  |  | 
|  | if (sdata->vif.type != NL80211_IFTYPE_MONITOR) | 
|  | continue; | 
|  |  | 
|  | if (sdata->u.mntr_flags & MONITOR_FLAG_COOK_FRAMES) | 
|  | continue; | 
|  |  | 
|  | if (prev_dev) { | 
|  | skb2 = skb_clone(skb, GFP_ATOMIC); | 
|  | if (skb2) { | 
|  | skb2->dev = prev_dev; | 
|  | netif_rx(skb2); | 
|  | } | 
|  | } | 
|  |  | 
|  | prev_dev = sdata->dev; | 
|  | sdata->dev->stats.rx_packets++; | 
|  | sdata->dev->stats.rx_bytes += skb->len; | 
|  | } | 
|  |  | 
|  | if (prev_dev) { | 
|  | skb->dev = prev_dev; | 
|  | netif_rx(skb); | 
|  | } else | 
|  | dev_kfree_skb(skb); | 
|  |  | 
|  | return origskb; | 
|  | } | 
|  |  | 
|  |  | 
|  | static void ieee80211_parse_qos(struct ieee80211_rx_data *rx) | 
|  | { | 
|  | struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)rx->skb->data; | 
|  | int tid; | 
|  |  | 
|  | /* does the frame have a qos control field? */ | 
|  | if (ieee80211_is_data_qos(hdr->frame_control)) { | 
|  | u8 *qc = ieee80211_get_qos_ctl(hdr); | 
|  | /* frame has qos control */ | 
|  | tid = *qc & IEEE80211_QOS_CTL_TID_MASK; | 
|  | if (*qc & IEEE80211_QOS_CONTROL_A_MSDU_PRESENT) | 
|  | rx->flags |= IEEE80211_RX_AMSDU; | 
|  | else | 
|  | rx->flags &= ~IEEE80211_RX_AMSDU; | 
|  | } else { | 
|  | /* | 
|  | * IEEE 802.11-2007, 7.1.3.4.1 ("Sequence Number field"): | 
|  | * | 
|  | *	Sequence numbers for management frames, QoS data | 
|  | *	frames with a broadcast/multicast address in the | 
|  | *	Address 1 field, and all non-QoS data frames sent | 
|  | *	by QoS STAs are assigned using an additional single | 
|  | *	modulo-4096 counter, [...] | 
|  | * | 
|  | * We also use that counter for non-QoS STAs. | 
|  | */ | 
|  | tid = NUM_RX_DATA_QUEUES - 1; | 
|  | } | 
|  |  | 
|  | rx->queue = tid; | 
|  | /* Set skb->priority to 1d tag if highest order bit of TID is not set. | 
|  | * For now, set skb->priority to 0 for other cases. */ | 
|  | rx->skb->priority = (tid > 7) ? 0 : tid; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * DOC: Packet alignment | 
|  | * | 
|  | * Drivers always need to pass packets that are aligned to two-byte boundaries | 
|  | * to the stack. | 
|  | * | 
|  | * Additionally, should, if possible, align the payload data in a way that | 
|  | * guarantees that the contained IP header is aligned to a four-byte | 
|  | * boundary. In the case of regular frames, this simply means aligning the | 
|  | * payload to a four-byte boundary (because either the IP header is directly | 
|  | * contained, or IV/RFC1042 headers that have a length divisible by four are | 
|  | * in front of it). | 
|  | * | 
|  | * With A-MSDU frames, however, the payload data address must yield two modulo | 
|  | * four because there are 14-byte 802.3 headers within the A-MSDU frames that | 
|  | * push the IP header further back to a multiple of four again. Thankfully, the | 
|  | * specs were sane enough this time around to require padding each A-MSDU | 
|  | * subframe to a length that is a multiple of four. | 
|  | * | 
|  | * Padding like Atheros hardware adds which is inbetween the 802.11 header and | 
|  | * the payload is not supported, the driver is required to move the 802.11 | 
|  | * header to be directly in front of the payload in that case. | 
|  | */ | 
|  | static void ieee80211_verify_alignment(struct ieee80211_rx_data *rx) | 
|  | { | 
|  | struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)rx->skb->data; | 
|  | int hdrlen; | 
|  |  | 
|  | #ifndef CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT | 
|  | return; | 
|  | #endif | 
|  |  | 
|  | if (WARN_ONCE((unsigned long)rx->skb->data & 1, | 
|  | "unaligned packet at 0x%p\n", rx->skb->data)) | 
|  | return; | 
|  |  | 
|  | if (!ieee80211_is_data_present(hdr->frame_control)) | 
|  | return; | 
|  |  | 
|  | hdrlen = ieee80211_hdrlen(hdr->frame_control); | 
|  | if (rx->flags & IEEE80211_RX_AMSDU) | 
|  | hdrlen += ETH_HLEN; | 
|  | WARN_ONCE(((unsigned long)(rx->skb->data + hdrlen)) & 3, | 
|  | "unaligned IP payload at 0x%p\n", rx->skb->data + hdrlen); | 
|  | } | 
|  |  | 
|  |  | 
|  | /* rx handlers */ | 
|  |  | 
|  | static ieee80211_rx_result debug_noinline | 
|  | ieee80211_rx_h_passive_scan(struct ieee80211_rx_data *rx) | 
|  | { | 
|  | struct ieee80211_local *local = rx->local; | 
|  | struct sk_buff *skb = rx->skb; | 
|  |  | 
|  | if (unlikely(local->hw_scanning)) | 
|  | return ieee80211_scan_rx(rx->sdata, skb, rx->status); | 
|  |  | 
|  | if (unlikely(local->sw_scanning)) { | 
|  | /* drop all the other packets during a software scan anyway */ | 
|  | if (ieee80211_scan_rx(rx->sdata, skb, rx->status) | 
|  | != RX_QUEUED) | 
|  | dev_kfree_skb(skb); | 
|  | return RX_QUEUED; | 
|  | } | 
|  |  | 
|  | if (unlikely(rx->flags & IEEE80211_RX_IN_SCAN)) { | 
|  | /* scanning finished during invoking of handlers */ | 
|  | I802_DEBUG_INC(local->rx_handlers_drop_passive_scan); | 
|  | return RX_DROP_UNUSABLE; | 
|  | } | 
|  |  | 
|  | return RX_CONTINUE; | 
|  | } | 
|  |  | 
|  |  | 
|  | static int ieee80211_is_unicast_robust_mgmt_frame(struct sk_buff *skb) | 
|  | { | 
|  | struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; | 
|  |  | 
|  | if (skb->len < 24 || is_multicast_ether_addr(hdr->addr1)) | 
|  | return 0; | 
|  |  | 
|  | return ieee80211_is_robust_mgmt_frame(hdr); | 
|  | } | 
|  |  | 
|  |  | 
|  | static int ieee80211_is_multicast_robust_mgmt_frame(struct sk_buff *skb) | 
|  | { | 
|  | struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; | 
|  |  | 
|  | if (skb->len < 24 || !is_multicast_ether_addr(hdr->addr1)) | 
|  | return 0; | 
|  |  | 
|  | return ieee80211_is_robust_mgmt_frame(hdr); | 
|  | } | 
|  |  | 
|  |  | 
|  | /* Get the BIP key index from MMIE; return -1 if this is not a BIP frame */ | 
|  | static int ieee80211_get_mmie_keyidx(struct sk_buff *skb) | 
|  | { | 
|  | struct ieee80211_mgmt *hdr = (struct ieee80211_mgmt *) skb->data; | 
|  | struct ieee80211_mmie *mmie; | 
|  |  | 
|  | if (skb->len < 24 + sizeof(*mmie) || | 
|  | !is_multicast_ether_addr(hdr->da)) | 
|  | return -1; | 
|  |  | 
|  | if (!ieee80211_is_robust_mgmt_frame((struct ieee80211_hdr *) hdr)) | 
|  | return -1; /* not a robust management frame */ | 
|  |  | 
|  | mmie = (struct ieee80211_mmie *) | 
|  | (skb->data + skb->len - sizeof(*mmie)); | 
|  | if (mmie->element_id != WLAN_EID_MMIE || | 
|  | mmie->length != sizeof(*mmie) - 2) | 
|  | return -1; | 
|  |  | 
|  | return le16_to_cpu(mmie->key_id); | 
|  | } | 
|  |  | 
|  |  | 
|  | static ieee80211_rx_result | 
|  | ieee80211_rx_mesh_check(struct ieee80211_rx_data *rx) | 
|  | { | 
|  | struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)rx->skb->data; | 
|  | unsigned int hdrlen = ieee80211_hdrlen(hdr->frame_control); | 
|  |  | 
|  | if (ieee80211_is_data(hdr->frame_control)) { | 
|  | if (!ieee80211_has_a4(hdr->frame_control)) | 
|  | return RX_DROP_MONITOR; | 
|  | if (memcmp(hdr->addr4, rx->dev->dev_addr, ETH_ALEN) == 0) | 
|  | return RX_DROP_MONITOR; | 
|  | } | 
|  |  | 
|  | /* If there is not an established peer link and this is not a peer link | 
|  | * establisment frame, beacon or probe, drop the frame. | 
|  | */ | 
|  |  | 
|  | if (!rx->sta || sta_plink_state(rx->sta) != PLINK_ESTAB) { | 
|  | struct ieee80211_mgmt *mgmt; | 
|  |  | 
|  | if (!ieee80211_is_mgmt(hdr->frame_control)) | 
|  | return RX_DROP_MONITOR; | 
|  |  | 
|  | if (ieee80211_is_action(hdr->frame_control)) { | 
|  | mgmt = (struct ieee80211_mgmt *)hdr; | 
|  | if (mgmt->u.action.category != PLINK_CATEGORY) | 
|  | return RX_DROP_MONITOR; | 
|  | return RX_CONTINUE; | 
|  | } | 
|  |  | 
|  | if (ieee80211_is_probe_req(hdr->frame_control) || | 
|  | ieee80211_is_probe_resp(hdr->frame_control) || | 
|  | ieee80211_is_beacon(hdr->frame_control)) | 
|  | return RX_CONTINUE; | 
|  |  | 
|  | return RX_DROP_MONITOR; | 
|  |  | 
|  | } | 
|  |  | 
|  | #define msh_h_get(h, l) ((struct ieee80211s_hdr *) ((u8 *)h + l)) | 
|  |  | 
|  | if (ieee80211_is_data(hdr->frame_control) && | 
|  | is_multicast_ether_addr(hdr->addr1) && | 
|  | mesh_rmc_check(hdr->addr4, msh_h_get(hdr, hdrlen), rx->sdata)) | 
|  | return RX_DROP_MONITOR; | 
|  | #undef msh_h_get | 
|  |  | 
|  | return RX_CONTINUE; | 
|  | } | 
|  |  | 
|  |  | 
|  | static ieee80211_rx_result debug_noinline | 
|  | ieee80211_rx_h_check(struct ieee80211_rx_data *rx) | 
|  | { | 
|  | struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)rx->skb->data; | 
|  |  | 
|  | /* Drop duplicate 802.11 retransmissions (IEEE 802.11 Chap. 9.2.9) */ | 
|  | if (rx->sta && !is_multicast_ether_addr(hdr->addr1)) { | 
|  | if (unlikely(ieee80211_has_retry(hdr->frame_control) && | 
|  | rx->sta->last_seq_ctrl[rx->queue] == | 
|  | hdr->seq_ctrl)) { | 
|  | if (rx->flags & IEEE80211_RX_RA_MATCH) { | 
|  | rx->local->dot11FrameDuplicateCount++; | 
|  | rx->sta->num_duplicates++; | 
|  | } | 
|  | return RX_DROP_MONITOR; | 
|  | } else | 
|  | rx->sta->last_seq_ctrl[rx->queue] = hdr->seq_ctrl; | 
|  | } | 
|  |  | 
|  | if (unlikely(rx->skb->len < 16)) { | 
|  | I802_DEBUG_INC(rx->local->rx_handlers_drop_short); | 
|  | return RX_DROP_MONITOR; | 
|  | } | 
|  |  | 
|  | /* Drop disallowed frame classes based on STA auth/assoc state; | 
|  | * IEEE 802.11, Chap 5.5. | 
|  | * | 
|  | * mac80211 filters only based on association state, i.e. it drops | 
|  | * Class 3 frames from not associated stations. hostapd sends | 
|  | * deauth/disassoc frames when needed. In addition, hostapd is | 
|  | * responsible for filtering on both auth and assoc states. | 
|  | */ | 
|  |  | 
|  | if (ieee80211_vif_is_mesh(&rx->sdata->vif)) | 
|  | return ieee80211_rx_mesh_check(rx); | 
|  |  | 
|  | if (unlikely((ieee80211_is_data(hdr->frame_control) || | 
|  | ieee80211_is_pspoll(hdr->frame_control)) && | 
|  | rx->sdata->vif.type != NL80211_IFTYPE_ADHOC && | 
|  | (!rx->sta || !test_sta_flags(rx->sta, WLAN_STA_ASSOC)))) { | 
|  | if ((!ieee80211_has_fromds(hdr->frame_control) && | 
|  | !ieee80211_has_tods(hdr->frame_control) && | 
|  | ieee80211_is_data(hdr->frame_control)) || | 
|  | !(rx->flags & IEEE80211_RX_RA_MATCH)) { | 
|  | /* Drop IBSS frames and frames for other hosts | 
|  | * silently. */ | 
|  | return RX_DROP_MONITOR; | 
|  | } | 
|  |  | 
|  | return RX_DROP_MONITOR; | 
|  | } | 
|  |  | 
|  | return RX_CONTINUE; | 
|  | } | 
|  |  | 
|  |  | 
|  | static ieee80211_rx_result debug_noinline | 
|  | ieee80211_rx_h_decrypt(struct ieee80211_rx_data *rx) | 
|  | { | 
|  | struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)rx->skb->data; | 
|  | int keyidx; | 
|  | int hdrlen; | 
|  | ieee80211_rx_result result = RX_DROP_UNUSABLE; | 
|  | struct ieee80211_key *stakey = NULL; | 
|  | int mmie_keyidx = -1; | 
|  |  | 
|  | /* | 
|  | * Key selection 101 | 
|  | * | 
|  | * There are four types of keys: | 
|  | *  - GTK (group keys) | 
|  | *  - IGTK (group keys for management frames) | 
|  | *  - PTK (pairwise keys) | 
|  | *  - STK (station-to-station pairwise keys) | 
|  | * | 
|  | * When selecting a key, we have to distinguish between multicast | 
|  | * (including broadcast) and unicast frames, the latter can only | 
|  | * use PTKs and STKs while the former always use GTKs and IGTKs. | 
|  | * Unless, of course, actual WEP keys ("pre-RSNA") are used, then | 
|  | * unicast frames can also use key indices like GTKs. Hence, if we | 
|  | * don't have a PTK/STK we check the key index for a WEP key. | 
|  | * | 
|  | * Note that in a regular BSS, multicast frames are sent by the | 
|  | * AP only, associated stations unicast the frame to the AP first | 
|  | * which then multicasts it on their behalf. | 
|  | * | 
|  | * There is also a slight problem in IBSS mode: GTKs are negotiated | 
|  | * with each station, that is something we don't currently handle. | 
|  | * The spec seems to expect that one negotiates the same key with | 
|  | * every station but there's no such requirement; VLANs could be | 
|  | * possible. | 
|  | */ | 
|  |  | 
|  | if (!ieee80211_has_protected(hdr->frame_control)) { | 
|  | if (!ieee80211_is_mgmt(hdr->frame_control) || | 
|  | rx->sta == NULL || !test_sta_flags(rx->sta, WLAN_STA_MFP)) | 
|  | return RX_CONTINUE; | 
|  | mmie_keyidx = ieee80211_get_mmie_keyidx(rx->skb); | 
|  | if (mmie_keyidx < 0) | 
|  | return RX_CONTINUE; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * No point in finding a key and decrypting if the frame is neither | 
|  | * addressed to us nor a multicast frame. | 
|  | */ | 
|  | if (!(rx->flags & IEEE80211_RX_RA_MATCH)) | 
|  | return RX_CONTINUE; | 
|  |  | 
|  | if (rx->sta) | 
|  | stakey = rcu_dereference(rx->sta->key); | 
|  |  | 
|  | if (!is_multicast_ether_addr(hdr->addr1) && stakey) { | 
|  | rx->key = stakey; | 
|  | } else if (mmie_keyidx >= 0) { | 
|  | /* Broadcast/multicast robust management frame / BIP */ | 
|  | if ((rx->status->flag & RX_FLAG_DECRYPTED) && | 
|  | (rx->status->flag & RX_FLAG_IV_STRIPPED)) | 
|  | return RX_CONTINUE; | 
|  |  | 
|  | if (mmie_keyidx < NUM_DEFAULT_KEYS || | 
|  | mmie_keyidx >= NUM_DEFAULT_KEYS + NUM_DEFAULT_MGMT_KEYS) | 
|  | return RX_DROP_MONITOR; /* unexpected BIP keyidx */ | 
|  | rx->key = rcu_dereference(rx->sdata->keys[mmie_keyidx]); | 
|  | } else { | 
|  | /* | 
|  | * The device doesn't give us the IV so we won't be | 
|  | * able to look up the key. That's ok though, we | 
|  | * don't need to decrypt the frame, we just won't | 
|  | * be able to keep statistics accurate. | 
|  | * Except for key threshold notifications, should | 
|  | * we somehow allow the driver to tell us which key | 
|  | * the hardware used if this flag is set? | 
|  | */ | 
|  | if ((rx->status->flag & RX_FLAG_DECRYPTED) && | 
|  | (rx->status->flag & RX_FLAG_IV_STRIPPED)) | 
|  | return RX_CONTINUE; | 
|  |  | 
|  | hdrlen = ieee80211_hdrlen(hdr->frame_control); | 
|  |  | 
|  | if (rx->skb->len < 8 + hdrlen) | 
|  | return RX_DROP_UNUSABLE; /* TODO: count this? */ | 
|  |  | 
|  | /* | 
|  | * no need to call ieee80211_wep_get_keyidx, | 
|  | * it verifies a bunch of things we've done already | 
|  | */ | 
|  | keyidx = rx->skb->data[hdrlen + 3] >> 6; | 
|  |  | 
|  | rx->key = rcu_dereference(rx->sdata->keys[keyidx]); | 
|  |  | 
|  | /* | 
|  | * RSNA-protected unicast frames should always be sent with | 
|  | * pairwise or station-to-station keys, but for WEP we allow | 
|  | * using a key index as well. | 
|  | */ | 
|  | if (rx->key && rx->key->conf.alg != ALG_WEP && | 
|  | !is_multicast_ether_addr(hdr->addr1)) | 
|  | rx->key = NULL; | 
|  | } | 
|  |  | 
|  | if (rx->key) { | 
|  | rx->key->tx_rx_count++; | 
|  | /* TODO: add threshold stuff again */ | 
|  | } else { | 
|  | return RX_DROP_MONITOR; | 
|  | } | 
|  |  | 
|  | /* Check for weak IVs if possible */ | 
|  | if (rx->sta && rx->key->conf.alg == ALG_WEP && | 
|  | ieee80211_is_data(hdr->frame_control) && | 
|  | (!(rx->status->flag & RX_FLAG_IV_STRIPPED) || | 
|  | !(rx->status->flag & RX_FLAG_DECRYPTED)) && | 
|  | ieee80211_wep_is_weak_iv(rx->skb, rx->key)) | 
|  | rx->sta->wep_weak_iv_count++; | 
|  |  | 
|  | switch (rx->key->conf.alg) { | 
|  | case ALG_WEP: | 
|  | result = ieee80211_crypto_wep_decrypt(rx); | 
|  | break; | 
|  | case ALG_TKIP: | 
|  | result = ieee80211_crypto_tkip_decrypt(rx); | 
|  | break; | 
|  | case ALG_CCMP: | 
|  | result = ieee80211_crypto_ccmp_decrypt(rx); | 
|  | break; | 
|  | case ALG_AES_CMAC: | 
|  | result = ieee80211_crypto_aes_cmac_decrypt(rx); | 
|  | break; | 
|  | } | 
|  |  | 
|  | /* either the frame has been decrypted or will be dropped */ | 
|  | rx->status->flag |= RX_FLAG_DECRYPTED; | 
|  |  | 
|  | return result; | 
|  | } | 
|  |  | 
|  | static ieee80211_rx_result debug_noinline | 
|  | ieee80211_rx_h_check_more_data(struct ieee80211_rx_data *rx) | 
|  | { | 
|  | struct ieee80211_local *local; | 
|  | struct ieee80211_hdr *hdr; | 
|  | struct sk_buff *skb; | 
|  |  | 
|  | local = rx->local; | 
|  | skb = rx->skb; | 
|  | hdr = (struct ieee80211_hdr *) skb->data; | 
|  |  | 
|  | if (!local->pspolling) | 
|  | return RX_CONTINUE; | 
|  |  | 
|  | if (!ieee80211_has_fromds(hdr->frame_control)) | 
|  | /* this is not from AP */ | 
|  | return RX_CONTINUE; | 
|  |  | 
|  | if (!ieee80211_is_data(hdr->frame_control)) | 
|  | return RX_CONTINUE; | 
|  |  | 
|  | if (!ieee80211_has_moredata(hdr->frame_control)) { | 
|  | /* AP has no more frames buffered for us */ | 
|  | local->pspolling = false; | 
|  | return RX_CONTINUE; | 
|  | } | 
|  |  | 
|  | /* more data bit is set, let's request a new frame from the AP */ | 
|  | ieee80211_send_pspoll(local, rx->sdata); | 
|  |  | 
|  | return RX_CONTINUE; | 
|  | } | 
|  |  | 
|  | static void ap_sta_ps_start(struct sta_info *sta) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = sta->sdata; | 
|  | struct ieee80211_local *local = sdata->local; | 
|  |  | 
|  | atomic_inc(&sdata->bss->num_sta_ps); | 
|  | set_and_clear_sta_flags(sta, WLAN_STA_PS, WLAN_STA_PSPOLL); | 
|  | if (local->ops->sta_notify) | 
|  | local->ops->sta_notify(local_to_hw(local), &sdata->vif, | 
|  | STA_NOTIFY_SLEEP, &sta->sta); | 
|  | #ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG | 
|  | printk(KERN_DEBUG "%s: STA %pM aid %d enters power save mode\n", | 
|  | sdata->dev->name, sta->sta.addr, sta->sta.aid); | 
|  | #endif /* CONFIG_MAC80211_VERBOSE_PS_DEBUG */ | 
|  | } | 
|  |  | 
|  | static int ap_sta_ps_end(struct sta_info *sta) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = sta->sdata; | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | struct sk_buff *skb; | 
|  | int sent = 0; | 
|  |  | 
|  | atomic_dec(&sdata->bss->num_sta_ps); | 
|  |  | 
|  | clear_sta_flags(sta, WLAN_STA_PS | WLAN_STA_PSPOLL); | 
|  | if (local->ops->sta_notify) | 
|  | local->ops->sta_notify(local_to_hw(local), &sdata->vif, | 
|  | STA_NOTIFY_AWAKE, &sta->sta); | 
|  |  | 
|  | if (!skb_queue_empty(&sta->ps_tx_buf)) | 
|  | sta_info_clear_tim_bit(sta); | 
|  |  | 
|  | #ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG | 
|  | printk(KERN_DEBUG "%s: STA %pM aid %d exits power save mode\n", | 
|  | sdata->dev->name, sta->sta.addr, sta->sta.aid); | 
|  | #endif /* CONFIG_MAC80211_VERBOSE_PS_DEBUG */ | 
|  |  | 
|  | /* Send all buffered frames to the station */ | 
|  | while ((skb = skb_dequeue(&sta->tx_filtered)) != NULL) { | 
|  | sent++; | 
|  | skb->requeue = 1; | 
|  | dev_queue_xmit(skb); | 
|  | } | 
|  | while ((skb = skb_dequeue(&sta->ps_tx_buf)) != NULL) { | 
|  | local->total_ps_buffered--; | 
|  | sent++; | 
|  | #ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG | 
|  | printk(KERN_DEBUG "%s: STA %pM aid %d send PS frame " | 
|  | "since STA not sleeping anymore\n", sdata->dev->name, | 
|  | sta->sta.addr, sta->sta.aid); | 
|  | #endif /* CONFIG_MAC80211_VERBOSE_PS_DEBUG */ | 
|  | skb->requeue = 1; | 
|  | dev_queue_xmit(skb); | 
|  | } | 
|  |  | 
|  | return sent; | 
|  | } | 
|  |  | 
|  | static ieee80211_rx_result debug_noinline | 
|  | ieee80211_rx_h_sta_process(struct ieee80211_rx_data *rx) | 
|  | { | 
|  | struct sta_info *sta = rx->sta; | 
|  | struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)rx->skb->data; | 
|  |  | 
|  | if (!sta) | 
|  | return RX_CONTINUE; | 
|  |  | 
|  | /* Update last_rx only for IBSS packets which are for the current | 
|  | * BSSID to avoid keeping the current IBSS network alive in cases where | 
|  | * other STAs are using different BSSID. */ | 
|  | if (rx->sdata->vif.type == NL80211_IFTYPE_ADHOC) { | 
|  | u8 *bssid = ieee80211_get_bssid(hdr, rx->skb->len, | 
|  | NL80211_IFTYPE_ADHOC); | 
|  | if (compare_ether_addr(bssid, rx->sdata->u.sta.bssid) == 0) | 
|  | sta->last_rx = jiffies; | 
|  | } else | 
|  | if (!is_multicast_ether_addr(hdr->addr1) || | 
|  | rx->sdata->vif.type == NL80211_IFTYPE_STATION) { | 
|  | /* Update last_rx only for unicast frames in order to prevent | 
|  | * the Probe Request frames (the only broadcast frames from a | 
|  | * STA in infrastructure mode) from keeping a connection alive. | 
|  | * Mesh beacons will update last_rx when if they are found to | 
|  | * match the current local configuration when processed. | 
|  | */ | 
|  | sta->last_rx = jiffies; | 
|  | } | 
|  |  | 
|  | if (!(rx->flags & IEEE80211_RX_RA_MATCH)) | 
|  | return RX_CONTINUE; | 
|  |  | 
|  | sta->rx_fragments++; | 
|  | sta->rx_bytes += rx->skb->len; | 
|  | sta->last_signal = rx->status->signal; | 
|  | sta->last_qual = rx->status->qual; | 
|  | sta->last_noise = rx->status->noise; | 
|  |  | 
|  | /* | 
|  | * Change STA power saving mode only at the end of a frame | 
|  | * exchange sequence. | 
|  | */ | 
|  | if (!ieee80211_has_morefrags(hdr->frame_control) && | 
|  | (rx->sdata->vif.type == NL80211_IFTYPE_AP || | 
|  | rx->sdata->vif.type == NL80211_IFTYPE_AP_VLAN)) { | 
|  | if (test_sta_flags(sta, WLAN_STA_PS)) { | 
|  | /* | 
|  | * Ignore doze->wake transitions that are | 
|  | * indicated by non-data frames, the standard | 
|  | * is unclear here, but for example going to | 
|  | * PS mode and then scanning would cause a | 
|  | * doze->wake transition for the probe request, | 
|  | * and that is clearly undesirable. | 
|  | */ | 
|  | if (ieee80211_is_data(hdr->frame_control) && | 
|  | !ieee80211_has_pm(hdr->frame_control)) | 
|  | rx->sent_ps_buffered += ap_sta_ps_end(sta); | 
|  | } else { | 
|  | if (ieee80211_has_pm(hdr->frame_control)) | 
|  | ap_sta_ps_start(sta); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Drop data::nullfunc frames silently, since they are used only to | 
|  | * control station power saving mode. */ | 
|  | if (ieee80211_is_nullfunc(hdr->frame_control)) { | 
|  | I802_DEBUG_INC(rx->local->rx_handlers_drop_nullfunc); | 
|  | /* Update counter and free packet here to avoid counting this | 
|  | * as a dropped packed. */ | 
|  | sta->rx_packets++; | 
|  | dev_kfree_skb(rx->skb); | 
|  | return RX_QUEUED; | 
|  | } | 
|  |  | 
|  | return RX_CONTINUE; | 
|  | } /* ieee80211_rx_h_sta_process */ | 
|  |  | 
|  | static inline struct ieee80211_fragment_entry * | 
|  | ieee80211_reassemble_add(struct ieee80211_sub_if_data *sdata, | 
|  | unsigned int frag, unsigned int seq, int rx_queue, | 
|  | struct sk_buff **skb) | 
|  | { | 
|  | struct ieee80211_fragment_entry *entry; | 
|  | int idx; | 
|  |  | 
|  | idx = sdata->fragment_next; | 
|  | entry = &sdata->fragments[sdata->fragment_next++]; | 
|  | if (sdata->fragment_next >= IEEE80211_FRAGMENT_MAX) | 
|  | sdata->fragment_next = 0; | 
|  |  | 
|  | if (!skb_queue_empty(&entry->skb_list)) { | 
|  | #ifdef CONFIG_MAC80211_VERBOSE_DEBUG | 
|  | struct ieee80211_hdr *hdr = | 
|  | (struct ieee80211_hdr *) entry->skb_list.next->data; | 
|  | printk(KERN_DEBUG "%s: RX reassembly removed oldest " | 
|  | "fragment entry (idx=%d age=%lu seq=%d last_frag=%d " | 
|  | "addr1=%pM addr2=%pM\n", | 
|  | sdata->dev->name, idx, | 
|  | jiffies - entry->first_frag_time, entry->seq, | 
|  | entry->last_frag, hdr->addr1, hdr->addr2); | 
|  | #endif | 
|  | __skb_queue_purge(&entry->skb_list); | 
|  | } | 
|  |  | 
|  | __skb_queue_tail(&entry->skb_list, *skb); /* no need for locking */ | 
|  | *skb = NULL; | 
|  | entry->first_frag_time = jiffies; | 
|  | entry->seq = seq; | 
|  | entry->rx_queue = rx_queue; | 
|  | entry->last_frag = frag; | 
|  | entry->ccmp = 0; | 
|  | entry->extra_len = 0; | 
|  |  | 
|  | return entry; | 
|  | } | 
|  |  | 
|  | static inline struct ieee80211_fragment_entry * | 
|  | ieee80211_reassemble_find(struct ieee80211_sub_if_data *sdata, | 
|  | unsigned int frag, unsigned int seq, | 
|  | int rx_queue, struct ieee80211_hdr *hdr) | 
|  | { | 
|  | struct ieee80211_fragment_entry *entry; | 
|  | int i, idx; | 
|  |  | 
|  | idx = sdata->fragment_next; | 
|  | for (i = 0; i < IEEE80211_FRAGMENT_MAX; i++) { | 
|  | struct ieee80211_hdr *f_hdr; | 
|  |  | 
|  | idx--; | 
|  | if (idx < 0) | 
|  | idx = IEEE80211_FRAGMENT_MAX - 1; | 
|  |  | 
|  | entry = &sdata->fragments[idx]; | 
|  | if (skb_queue_empty(&entry->skb_list) || entry->seq != seq || | 
|  | entry->rx_queue != rx_queue || | 
|  | entry->last_frag + 1 != frag) | 
|  | continue; | 
|  |  | 
|  | f_hdr = (struct ieee80211_hdr *)entry->skb_list.next->data; | 
|  |  | 
|  | /* | 
|  | * Check ftype and addresses are equal, else check next fragment | 
|  | */ | 
|  | if (((hdr->frame_control ^ f_hdr->frame_control) & | 
|  | cpu_to_le16(IEEE80211_FCTL_FTYPE)) || | 
|  | compare_ether_addr(hdr->addr1, f_hdr->addr1) != 0 || | 
|  | compare_ether_addr(hdr->addr2, f_hdr->addr2) != 0) | 
|  | continue; | 
|  |  | 
|  | if (time_after(jiffies, entry->first_frag_time + 2 * HZ)) { | 
|  | __skb_queue_purge(&entry->skb_list); | 
|  | continue; | 
|  | } | 
|  | return entry; | 
|  | } | 
|  |  | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | static ieee80211_rx_result debug_noinline | 
|  | ieee80211_rx_h_defragment(struct ieee80211_rx_data *rx) | 
|  | { | 
|  | struct ieee80211_hdr *hdr; | 
|  | u16 sc; | 
|  | __le16 fc; | 
|  | unsigned int frag, seq; | 
|  | struct ieee80211_fragment_entry *entry; | 
|  | struct sk_buff *skb; | 
|  |  | 
|  | hdr = (struct ieee80211_hdr *)rx->skb->data; | 
|  | fc = hdr->frame_control; | 
|  | sc = le16_to_cpu(hdr->seq_ctrl); | 
|  | frag = sc & IEEE80211_SCTL_FRAG; | 
|  |  | 
|  | if (likely((!ieee80211_has_morefrags(fc) && frag == 0) || | 
|  | (rx->skb)->len < 24 || | 
|  | is_multicast_ether_addr(hdr->addr1))) { | 
|  | /* not fragmented */ | 
|  | goto out; | 
|  | } | 
|  | I802_DEBUG_INC(rx->local->rx_handlers_fragments); | 
|  |  | 
|  | seq = (sc & IEEE80211_SCTL_SEQ) >> 4; | 
|  |  | 
|  | if (frag == 0) { | 
|  | /* This is the first fragment of a new frame. */ | 
|  | entry = ieee80211_reassemble_add(rx->sdata, frag, seq, | 
|  | rx->queue, &(rx->skb)); | 
|  | if (rx->key && rx->key->conf.alg == ALG_CCMP && | 
|  | ieee80211_has_protected(fc)) { | 
|  | /* Store CCMP PN so that we can verify that the next | 
|  | * fragment has a sequential PN value. */ | 
|  | entry->ccmp = 1; | 
|  | memcpy(entry->last_pn, | 
|  | rx->key->u.ccmp.rx_pn[rx->queue], | 
|  | CCMP_PN_LEN); | 
|  | } | 
|  | return RX_QUEUED; | 
|  | } | 
|  |  | 
|  | /* This is a fragment for a frame that should already be pending in | 
|  | * fragment cache. Add this fragment to the end of the pending entry. | 
|  | */ | 
|  | entry = ieee80211_reassemble_find(rx->sdata, frag, seq, rx->queue, hdr); | 
|  | if (!entry) { | 
|  | I802_DEBUG_INC(rx->local->rx_handlers_drop_defrag); | 
|  | return RX_DROP_MONITOR; | 
|  | } | 
|  |  | 
|  | /* Verify that MPDUs within one MSDU have sequential PN values. | 
|  | * (IEEE 802.11i, 8.3.3.4.5) */ | 
|  | if (entry->ccmp) { | 
|  | int i; | 
|  | u8 pn[CCMP_PN_LEN], *rpn; | 
|  | if (!rx->key || rx->key->conf.alg != ALG_CCMP) | 
|  | return RX_DROP_UNUSABLE; | 
|  | memcpy(pn, entry->last_pn, CCMP_PN_LEN); | 
|  | for (i = CCMP_PN_LEN - 1; i >= 0; i--) { | 
|  | pn[i]++; | 
|  | if (pn[i]) | 
|  | break; | 
|  | } | 
|  | rpn = rx->key->u.ccmp.rx_pn[rx->queue]; | 
|  | if (memcmp(pn, rpn, CCMP_PN_LEN)) | 
|  | return RX_DROP_UNUSABLE; | 
|  | memcpy(entry->last_pn, pn, CCMP_PN_LEN); | 
|  | } | 
|  |  | 
|  | skb_pull(rx->skb, ieee80211_hdrlen(fc)); | 
|  | __skb_queue_tail(&entry->skb_list, rx->skb); | 
|  | entry->last_frag = frag; | 
|  | entry->extra_len += rx->skb->len; | 
|  | if (ieee80211_has_morefrags(fc)) { | 
|  | rx->skb = NULL; | 
|  | return RX_QUEUED; | 
|  | } | 
|  |  | 
|  | rx->skb = __skb_dequeue(&entry->skb_list); | 
|  | if (skb_tailroom(rx->skb) < entry->extra_len) { | 
|  | I802_DEBUG_INC(rx->local->rx_expand_skb_head2); | 
|  | if (unlikely(pskb_expand_head(rx->skb, 0, entry->extra_len, | 
|  | GFP_ATOMIC))) { | 
|  | I802_DEBUG_INC(rx->local->rx_handlers_drop_defrag); | 
|  | __skb_queue_purge(&entry->skb_list); | 
|  | return RX_DROP_UNUSABLE; | 
|  | } | 
|  | } | 
|  | while ((skb = __skb_dequeue(&entry->skb_list))) { | 
|  | memcpy(skb_put(rx->skb, skb->len), skb->data, skb->len); | 
|  | dev_kfree_skb(skb); | 
|  | } | 
|  |  | 
|  | /* Complete frame has been reassembled - process it now */ | 
|  | rx->flags |= IEEE80211_RX_FRAGMENTED; | 
|  |  | 
|  | out: | 
|  | if (rx->sta) | 
|  | rx->sta->rx_packets++; | 
|  | if (is_multicast_ether_addr(hdr->addr1)) | 
|  | rx->local->dot11MulticastReceivedFrameCount++; | 
|  | else | 
|  | ieee80211_led_rx(rx->local); | 
|  | return RX_CONTINUE; | 
|  | } | 
|  |  | 
|  | static ieee80211_rx_result debug_noinline | 
|  | ieee80211_rx_h_ps_poll(struct ieee80211_rx_data *rx) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(rx->dev); | 
|  | struct sk_buff *skb; | 
|  | int no_pending_pkts; | 
|  | __le16 fc = ((struct ieee80211_hdr *)rx->skb->data)->frame_control; | 
|  |  | 
|  | if (likely(!rx->sta || !ieee80211_is_pspoll(fc) || | 
|  | !(rx->flags & IEEE80211_RX_RA_MATCH))) | 
|  | return RX_CONTINUE; | 
|  |  | 
|  | if ((sdata->vif.type != NL80211_IFTYPE_AP) && | 
|  | (sdata->vif.type != NL80211_IFTYPE_AP_VLAN)) | 
|  | return RX_DROP_UNUSABLE; | 
|  |  | 
|  | skb = skb_dequeue(&rx->sta->tx_filtered); | 
|  | if (!skb) { | 
|  | skb = skb_dequeue(&rx->sta->ps_tx_buf); | 
|  | if (skb) | 
|  | rx->local->total_ps_buffered--; | 
|  | } | 
|  | no_pending_pkts = skb_queue_empty(&rx->sta->tx_filtered) && | 
|  | skb_queue_empty(&rx->sta->ps_tx_buf); | 
|  |  | 
|  | if (skb) { | 
|  | struct ieee80211_hdr *hdr = | 
|  | (struct ieee80211_hdr *) skb->data; | 
|  |  | 
|  | /* | 
|  | * Tell TX path to send one frame even though the STA may | 
|  | * still remain is PS mode after this frame exchange. | 
|  | */ | 
|  | set_sta_flags(rx->sta, WLAN_STA_PSPOLL); | 
|  |  | 
|  | #ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG | 
|  | printk(KERN_DEBUG "STA %pM aid %d: PS Poll (entries after %d)\n", | 
|  | rx->sta->sta.addr, rx->sta->sta.aid, | 
|  | skb_queue_len(&rx->sta->ps_tx_buf)); | 
|  | #endif /* CONFIG_MAC80211_VERBOSE_PS_DEBUG */ | 
|  |  | 
|  | /* Use MoreData flag to indicate whether there are more | 
|  | * buffered frames for this STA */ | 
|  | if (no_pending_pkts) | 
|  | hdr->frame_control &= cpu_to_le16(~IEEE80211_FCTL_MOREDATA); | 
|  | else | 
|  | hdr->frame_control |= cpu_to_le16(IEEE80211_FCTL_MOREDATA); | 
|  |  | 
|  | dev_queue_xmit(skb); | 
|  |  | 
|  | if (no_pending_pkts) | 
|  | sta_info_clear_tim_bit(rx->sta); | 
|  | #ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG | 
|  | } else if (!rx->sent_ps_buffered) { | 
|  | /* | 
|  | * FIXME: This can be the result of a race condition between | 
|  | *	  us expiring a frame and the station polling for it. | 
|  | *	  Should we send it a null-func frame indicating we | 
|  | *	  have nothing buffered for it? | 
|  | */ | 
|  | printk(KERN_DEBUG "%s: STA %pM sent PS Poll even " | 
|  | "though there are no buffered frames for it\n", | 
|  | rx->dev->name, rx->sta->sta.addr); | 
|  | #endif /* CONFIG_MAC80211_VERBOSE_PS_DEBUG */ | 
|  | } | 
|  |  | 
|  | /* Free PS Poll skb here instead of returning RX_DROP that would | 
|  | * count as an dropped frame. */ | 
|  | dev_kfree_skb(rx->skb); | 
|  |  | 
|  | return RX_QUEUED; | 
|  | } | 
|  |  | 
|  | static ieee80211_rx_result debug_noinline | 
|  | ieee80211_rx_h_remove_qos_control(struct ieee80211_rx_data *rx) | 
|  | { | 
|  | u8 *data = rx->skb->data; | 
|  | struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)data; | 
|  |  | 
|  | if (!ieee80211_is_data_qos(hdr->frame_control)) | 
|  | return RX_CONTINUE; | 
|  |  | 
|  | /* remove the qos control field, update frame type and meta-data */ | 
|  | memmove(data + IEEE80211_QOS_CTL_LEN, data, | 
|  | ieee80211_hdrlen(hdr->frame_control) - IEEE80211_QOS_CTL_LEN); | 
|  | hdr = (struct ieee80211_hdr *)skb_pull(rx->skb, IEEE80211_QOS_CTL_LEN); | 
|  | /* change frame type to non QOS */ | 
|  | hdr->frame_control &= ~cpu_to_le16(IEEE80211_STYPE_QOS_DATA); | 
|  |  | 
|  | return RX_CONTINUE; | 
|  | } | 
|  |  | 
|  | static int | 
|  | ieee80211_802_1x_port_control(struct ieee80211_rx_data *rx) | 
|  | { | 
|  | if (unlikely(!rx->sta || | 
|  | !test_sta_flags(rx->sta, WLAN_STA_AUTHORIZED))) | 
|  | return -EACCES; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int | 
|  | ieee80211_drop_unencrypted(struct ieee80211_rx_data *rx, __le16 fc) | 
|  | { | 
|  | /* | 
|  | * Pass through unencrypted frames if the hardware has | 
|  | * decrypted them already. | 
|  | */ | 
|  | if (rx->status->flag & RX_FLAG_DECRYPTED) | 
|  | return 0; | 
|  |  | 
|  | /* Drop unencrypted frames if key is set. */ | 
|  | if (unlikely(!ieee80211_has_protected(fc) && | 
|  | !ieee80211_is_nullfunc(fc) && | 
|  | (!ieee80211_is_mgmt(fc) || | 
|  | (ieee80211_is_unicast_robust_mgmt_frame(rx->skb) && | 
|  | rx->sta && test_sta_flags(rx->sta, WLAN_STA_MFP))) && | 
|  | (rx->key || rx->sdata->drop_unencrypted))) | 
|  | return -EACCES; | 
|  | /* BIP does not use Protected field, so need to check MMIE */ | 
|  | if (unlikely(rx->sta && test_sta_flags(rx->sta, WLAN_STA_MFP) && | 
|  | ieee80211_is_multicast_robust_mgmt_frame(rx->skb) && | 
|  | ieee80211_get_mmie_keyidx(rx->skb) < 0 && | 
|  | (rx->key || rx->sdata->drop_unencrypted))) | 
|  | return -EACCES; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int | 
|  | ieee80211_data_to_8023(struct ieee80211_rx_data *rx) | 
|  | { | 
|  | struct net_device *dev = rx->dev; | 
|  | struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) rx->skb->data; | 
|  | u16 hdrlen, ethertype; | 
|  | u8 *payload; | 
|  | u8 dst[ETH_ALEN]; | 
|  | u8 src[ETH_ALEN] __aligned(2); | 
|  | struct sk_buff *skb = rx->skb; | 
|  | struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
|  |  | 
|  | if (unlikely(!ieee80211_is_data_present(hdr->frame_control))) | 
|  | return -1; | 
|  |  | 
|  | hdrlen = ieee80211_hdrlen(hdr->frame_control); | 
|  |  | 
|  | /* convert IEEE 802.11 header + possible LLC headers into Ethernet | 
|  | * header | 
|  | * IEEE 802.11 address fields: | 
|  | * ToDS FromDS Addr1 Addr2 Addr3 Addr4 | 
|  | *   0     0   DA    SA    BSSID n/a | 
|  | *   0     1   DA    BSSID SA    n/a | 
|  | *   1     0   BSSID SA    DA    n/a | 
|  | *   1     1   RA    TA    DA    SA | 
|  | */ | 
|  | memcpy(dst, ieee80211_get_DA(hdr), ETH_ALEN); | 
|  | memcpy(src, ieee80211_get_SA(hdr), ETH_ALEN); | 
|  |  | 
|  | switch (hdr->frame_control & | 
|  | cpu_to_le16(IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS)) { | 
|  | case cpu_to_le16(IEEE80211_FCTL_TODS): | 
|  | if (unlikely(sdata->vif.type != NL80211_IFTYPE_AP && | 
|  | sdata->vif.type != NL80211_IFTYPE_AP_VLAN)) | 
|  | return -1; | 
|  | break; | 
|  | case cpu_to_le16(IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS): | 
|  | if (unlikely(sdata->vif.type != NL80211_IFTYPE_WDS && | 
|  | sdata->vif.type != NL80211_IFTYPE_MESH_POINT)) | 
|  | return -1; | 
|  | if (ieee80211_vif_is_mesh(&sdata->vif)) { | 
|  | struct ieee80211s_hdr *meshdr = (struct ieee80211s_hdr *) | 
|  | (skb->data + hdrlen); | 
|  | hdrlen += ieee80211_get_mesh_hdrlen(meshdr); | 
|  | if (meshdr->flags & MESH_FLAGS_AE_A5_A6) { | 
|  | memcpy(dst, meshdr->eaddr1, ETH_ALEN); | 
|  | memcpy(src, meshdr->eaddr2, ETH_ALEN); | 
|  | } | 
|  | } | 
|  | break; | 
|  | case cpu_to_le16(IEEE80211_FCTL_FROMDS): | 
|  | if (sdata->vif.type != NL80211_IFTYPE_STATION || | 
|  | (is_multicast_ether_addr(dst) && | 
|  | !compare_ether_addr(src, dev->dev_addr))) | 
|  | return -1; | 
|  | break; | 
|  | case cpu_to_le16(0): | 
|  | if (sdata->vif.type != NL80211_IFTYPE_ADHOC) | 
|  | return -1; | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (unlikely(skb->len - hdrlen < 8)) | 
|  | return -1; | 
|  |  | 
|  | payload = skb->data + hdrlen; | 
|  | ethertype = (payload[6] << 8) | payload[7]; | 
|  |  | 
|  | if (likely((compare_ether_addr(payload, rfc1042_header) == 0 && | 
|  | ethertype != ETH_P_AARP && ethertype != ETH_P_IPX) || | 
|  | compare_ether_addr(payload, bridge_tunnel_header) == 0)) { | 
|  | /* remove RFC1042 or Bridge-Tunnel encapsulation and | 
|  | * replace EtherType */ | 
|  | skb_pull(skb, hdrlen + 6); | 
|  | memcpy(skb_push(skb, ETH_ALEN), src, ETH_ALEN); | 
|  | memcpy(skb_push(skb, ETH_ALEN), dst, ETH_ALEN); | 
|  | } else { | 
|  | struct ethhdr *ehdr; | 
|  | __be16 len; | 
|  |  | 
|  | skb_pull(skb, hdrlen); | 
|  | len = htons(skb->len); | 
|  | ehdr = (struct ethhdr *) skb_push(skb, sizeof(struct ethhdr)); | 
|  | memcpy(ehdr->h_dest, dst, ETH_ALEN); | 
|  | memcpy(ehdr->h_source, src, ETH_ALEN); | 
|  | ehdr->h_proto = len; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * requires that rx->skb is a frame with ethernet header | 
|  | */ | 
|  | static bool ieee80211_frame_allowed(struct ieee80211_rx_data *rx, __le16 fc) | 
|  | { | 
|  | static const u8 pae_group_addr[ETH_ALEN] __aligned(2) | 
|  | = { 0x01, 0x80, 0xC2, 0x00, 0x00, 0x03 }; | 
|  | struct ethhdr *ehdr = (struct ethhdr *) rx->skb->data; | 
|  |  | 
|  | /* | 
|  | * Allow EAPOL frames to us/the PAE group address regardless | 
|  | * of whether the frame was encrypted or not. | 
|  | */ | 
|  | if (ehdr->h_proto == htons(ETH_P_PAE) && | 
|  | (compare_ether_addr(ehdr->h_dest, rx->dev->dev_addr) == 0 || | 
|  | compare_ether_addr(ehdr->h_dest, pae_group_addr) == 0)) | 
|  | return true; | 
|  |  | 
|  | if (ieee80211_802_1x_port_control(rx) || | 
|  | ieee80211_drop_unencrypted(rx, fc)) | 
|  | return false; | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * requires that rx->skb is a frame with ethernet header | 
|  | */ | 
|  | static void | 
|  | ieee80211_deliver_skb(struct ieee80211_rx_data *rx) | 
|  | { | 
|  | struct net_device *dev = rx->dev; | 
|  | struct ieee80211_local *local = rx->local; | 
|  | struct sk_buff *skb, *xmit_skb; | 
|  | struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
|  | struct ethhdr *ehdr = (struct ethhdr *) rx->skb->data; | 
|  | struct sta_info *dsta; | 
|  |  | 
|  | skb = rx->skb; | 
|  | xmit_skb = NULL; | 
|  |  | 
|  | if ((sdata->vif.type == NL80211_IFTYPE_AP || | 
|  | sdata->vif.type == NL80211_IFTYPE_AP_VLAN) && | 
|  | !(sdata->flags & IEEE80211_SDATA_DONT_BRIDGE_PACKETS) && | 
|  | (rx->flags & IEEE80211_RX_RA_MATCH)) { | 
|  | if (is_multicast_ether_addr(ehdr->h_dest)) { | 
|  | /* | 
|  | * send multicast frames both to higher layers in | 
|  | * local net stack and back to the wireless medium | 
|  | */ | 
|  | xmit_skb = skb_copy(skb, GFP_ATOMIC); | 
|  | if (!xmit_skb && net_ratelimit()) | 
|  | printk(KERN_DEBUG "%s: failed to clone " | 
|  | "multicast frame\n", dev->name); | 
|  | } else { | 
|  | dsta = sta_info_get(local, skb->data); | 
|  | if (dsta && dsta->sdata->dev == dev) { | 
|  | /* | 
|  | * The destination station is associated to | 
|  | * this AP (in this VLAN), so send the frame | 
|  | * directly to it and do not pass it to local | 
|  | * net stack. | 
|  | */ | 
|  | xmit_skb = skb; | 
|  | skb = NULL; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | if (skb) { | 
|  | int align __maybe_unused; | 
|  |  | 
|  | #if defined(CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT) || !defined(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS) | 
|  | /* | 
|  | * 'align' will only take the values 0 or 2 here | 
|  | * since all frames are required to be aligned | 
|  | * to 2-byte boundaries when being passed to | 
|  | * mac80211. That also explains the __skb_push() | 
|  | * below. | 
|  | */ | 
|  | align = (unsigned long)skb->data & 4; | 
|  | if (align) { | 
|  | if (WARN_ON(skb_headroom(skb) < 3)) { | 
|  | dev_kfree_skb(skb); | 
|  | skb = NULL; | 
|  | } else { | 
|  | u8 *data = skb->data; | 
|  | size_t len = skb->len; | 
|  | u8 *new = __skb_push(skb, align); | 
|  | memmove(new, data, len); | 
|  | __skb_trim(skb, len); | 
|  | } | 
|  | } | 
|  | #endif | 
|  |  | 
|  | if (skb) { | 
|  | /* deliver to local stack */ | 
|  | skb->protocol = eth_type_trans(skb, dev); | 
|  | memset(skb->cb, 0, sizeof(skb->cb)); | 
|  | netif_rx(skb); | 
|  | } | 
|  | } | 
|  |  | 
|  | if (xmit_skb) { | 
|  | /* send to wireless media */ | 
|  | xmit_skb->protocol = htons(ETH_P_802_3); | 
|  | skb_reset_network_header(xmit_skb); | 
|  | skb_reset_mac_header(xmit_skb); | 
|  | dev_queue_xmit(xmit_skb); | 
|  | } | 
|  | } | 
|  |  | 
|  | static ieee80211_rx_result debug_noinline | 
|  | ieee80211_rx_h_amsdu(struct ieee80211_rx_data *rx) | 
|  | { | 
|  | struct net_device *dev = rx->dev; | 
|  | struct ieee80211_local *local = rx->local; | 
|  | u16 ethertype; | 
|  | u8 *payload; | 
|  | struct sk_buff *skb = rx->skb, *frame = NULL; | 
|  | struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; | 
|  | __le16 fc = hdr->frame_control; | 
|  | const struct ethhdr *eth; | 
|  | int remaining, err; | 
|  | u8 dst[ETH_ALEN]; | 
|  | u8 src[ETH_ALEN]; | 
|  |  | 
|  | if (unlikely(!ieee80211_is_data(fc))) | 
|  | return RX_CONTINUE; | 
|  |  | 
|  | if (unlikely(!ieee80211_is_data_present(fc))) | 
|  | return RX_DROP_MONITOR; | 
|  |  | 
|  | if (!(rx->flags & IEEE80211_RX_AMSDU)) | 
|  | return RX_CONTINUE; | 
|  |  | 
|  | err = ieee80211_data_to_8023(rx); | 
|  | if (unlikely(err)) | 
|  | return RX_DROP_UNUSABLE; | 
|  |  | 
|  | skb->dev = dev; | 
|  |  | 
|  | dev->stats.rx_packets++; | 
|  | dev->stats.rx_bytes += skb->len; | 
|  |  | 
|  | /* skip the wrapping header */ | 
|  | eth = (struct ethhdr *) skb_pull(skb, sizeof(struct ethhdr)); | 
|  | if (!eth) | 
|  | return RX_DROP_UNUSABLE; | 
|  |  | 
|  | while (skb != frame) { | 
|  | u8 padding; | 
|  | __be16 len = eth->h_proto; | 
|  | unsigned int subframe_len = sizeof(struct ethhdr) + ntohs(len); | 
|  |  | 
|  | remaining = skb->len; | 
|  | memcpy(dst, eth->h_dest, ETH_ALEN); | 
|  | memcpy(src, eth->h_source, ETH_ALEN); | 
|  |  | 
|  | padding = ((4 - subframe_len) & 0x3); | 
|  | /* the last MSDU has no padding */ | 
|  | if (subframe_len > remaining) | 
|  | return RX_DROP_UNUSABLE; | 
|  |  | 
|  | skb_pull(skb, sizeof(struct ethhdr)); | 
|  | /* if last subframe reuse skb */ | 
|  | if (remaining <= subframe_len + padding) | 
|  | frame = skb; | 
|  | else { | 
|  | /* | 
|  | * Allocate and reserve two bytes more for payload | 
|  | * alignment since sizeof(struct ethhdr) is 14. | 
|  | */ | 
|  | frame = dev_alloc_skb( | 
|  | ALIGN(local->hw.extra_tx_headroom, 4) + | 
|  | subframe_len + 2); | 
|  |  | 
|  | if (frame == NULL) | 
|  | return RX_DROP_UNUSABLE; | 
|  |  | 
|  | skb_reserve(frame, | 
|  | ALIGN(local->hw.extra_tx_headroom, 4) + | 
|  | sizeof(struct ethhdr) + 2); | 
|  | memcpy(skb_put(frame, ntohs(len)), skb->data, | 
|  | ntohs(len)); | 
|  |  | 
|  | eth = (struct ethhdr *) skb_pull(skb, ntohs(len) + | 
|  | padding); | 
|  | if (!eth) { | 
|  | dev_kfree_skb(frame); | 
|  | return RX_DROP_UNUSABLE; | 
|  | } | 
|  | } | 
|  |  | 
|  | skb_reset_network_header(frame); | 
|  | frame->dev = dev; | 
|  | frame->priority = skb->priority; | 
|  | rx->skb = frame; | 
|  |  | 
|  | payload = frame->data; | 
|  | ethertype = (payload[6] << 8) | payload[7]; | 
|  |  | 
|  | if (likely((compare_ether_addr(payload, rfc1042_header) == 0 && | 
|  | ethertype != ETH_P_AARP && ethertype != ETH_P_IPX) || | 
|  | compare_ether_addr(payload, | 
|  | bridge_tunnel_header) == 0)) { | 
|  | /* remove RFC1042 or Bridge-Tunnel | 
|  | * encapsulation and replace EtherType */ | 
|  | skb_pull(frame, 6); | 
|  | memcpy(skb_push(frame, ETH_ALEN), src, ETH_ALEN); | 
|  | memcpy(skb_push(frame, ETH_ALEN), dst, ETH_ALEN); | 
|  | } else { | 
|  | memcpy(skb_push(frame, sizeof(__be16)), | 
|  | &len, sizeof(__be16)); | 
|  | memcpy(skb_push(frame, ETH_ALEN), src, ETH_ALEN); | 
|  | memcpy(skb_push(frame, ETH_ALEN), dst, ETH_ALEN); | 
|  | } | 
|  |  | 
|  | if (!ieee80211_frame_allowed(rx, fc)) { | 
|  | if (skb == frame) /* last frame */ | 
|  | return RX_DROP_UNUSABLE; | 
|  | dev_kfree_skb(frame); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | ieee80211_deliver_skb(rx); | 
|  | } | 
|  |  | 
|  | return RX_QUEUED; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_MAC80211_MESH | 
|  | static ieee80211_rx_result | 
|  | ieee80211_rx_h_mesh_fwding(struct ieee80211_rx_data *rx) | 
|  | { | 
|  | struct ieee80211_hdr *hdr; | 
|  | struct ieee80211s_hdr *mesh_hdr; | 
|  | unsigned int hdrlen; | 
|  | struct sk_buff *skb = rx->skb, *fwd_skb; | 
|  |  | 
|  | hdr = (struct ieee80211_hdr *) skb->data; | 
|  | hdrlen = ieee80211_hdrlen(hdr->frame_control); | 
|  | mesh_hdr = (struct ieee80211s_hdr *) (skb->data + hdrlen); | 
|  |  | 
|  | if (!ieee80211_is_data(hdr->frame_control)) | 
|  | return RX_CONTINUE; | 
|  |  | 
|  | if (!mesh_hdr->ttl) | 
|  | /* illegal frame */ | 
|  | return RX_DROP_MONITOR; | 
|  |  | 
|  | if (mesh_hdr->flags & MESH_FLAGS_AE_A5_A6){ | 
|  | struct ieee80211_sub_if_data *sdata; | 
|  | struct mesh_path *mppath; | 
|  |  | 
|  | sdata = IEEE80211_DEV_TO_SUB_IF(rx->dev); | 
|  | rcu_read_lock(); | 
|  | mppath = mpp_path_lookup(mesh_hdr->eaddr2, sdata); | 
|  | if (!mppath) { | 
|  | mpp_path_add(mesh_hdr->eaddr2, hdr->addr4, sdata); | 
|  | } else { | 
|  | spin_lock_bh(&mppath->state_lock); | 
|  | mppath->exp_time = jiffies; | 
|  | if (compare_ether_addr(mppath->mpp, hdr->addr4) != 0) | 
|  | memcpy(mppath->mpp, hdr->addr4, ETH_ALEN); | 
|  | spin_unlock_bh(&mppath->state_lock); | 
|  | } | 
|  | rcu_read_unlock(); | 
|  | } | 
|  |  | 
|  | if (compare_ether_addr(rx->dev->dev_addr, hdr->addr3) == 0) | 
|  | return RX_CONTINUE; | 
|  |  | 
|  | mesh_hdr->ttl--; | 
|  |  | 
|  | if (rx->flags & IEEE80211_RX_RA_MATCH) { | 
|  | if (!mesh_hdr->ttl) | 
|  | IEEE80211_IFSTA_MESH_CTR_INC(&rx->sdata->u.mesh, | 
|  | dropped_frames_ttl); | 
|  | else { | 
|  | struct ieee80211_hdr *fwd_hdr; | 
|  | fwd_skb = skb_copy(skb, GFP_ATOMIC); | 
|  |  | 
|  | if (!fwd_skb && net_ratelimit()) | 
|  | printk(KERN_DEBUG "%s: failed to clone mesh frame\n", | 
|  | rx->dev->name); | 
|  |  | 
|  | fwd_hdr =  (struct ieee80211_hdr *) fwd_skb->data; | 
|  | /* | 
|  | * Save TA to addr1 to send TA a path error if a | 
|  | * suitable next hop is not found | 
|  | */ | 
|  | memcpy(fwd_hdr->addr1, fwd_hdr->addr2, ETH_ALEN); | 
|  | memcpy(fwd_hdr->addr2, rx->dev->dev_addr, ETH_ALEN); | 
|  | fwd_skb->dev = rx->local->mdev; | 
|  | fwd_skb->iif = rx->dev->ifindex; | 
|  | dev_queue_xmit(fwd_skb); | 
|  | } | 
|  | } | 
|  |  | 
|  | if (is_multicast_ether_addr(hdr->addr3) || | 
|  | rx->dev->flags & IFF_PROMISC) | 
|  | return RX_CONTINUE; | 
|  | else | 
|  | return RX_DROP_MONITOR; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | static ieee80211_rx_result debug_noinline | 
|  | ieee80211_rx_h_data(struct ieee80211_rx_data *rx) | 
|  | { | 
|  | struct net_device *dev = rx->dev; | 
|  | struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)rx->skb->data; | 
|  | __le16 fc = hdr->frame_control; | 
|  | int err; | 
|  |  | 
|  | if (unlikely(!ieee80211_is_data(hdr->frame_control))) | 
|  | return RX_CONTINUE; | 
|  |  | 
|  | if (unlikely(!ieee80211_is_data_present(hdr->frame_control))) | 
|  | return RX_DROP_MONITOR; | 
|  |  | 
|  | err = ieee80211_data_to_8023(rx); | 
|  | if (unlikely(err)) | 
|  | return RX_DROP_UNUSABLE; | 
|  |  | 
|  | if (!ieee80211_frame_allowed(rx, fc)) | 
|  | return RX_DROP_MONITOR; | 
|  |  | 
|  | rx->skb->dev = dev; | 
|  |  | 
|  | dev->stats.rx_packets++; | 
|  | dev->stats.rx_bytes += rx->skb->len; | 
|  |  | 
|  | ieee80211_deliver_skb(rx); | 
|  |  | 
|  | return RX_QUEUED; | 
|  | } | 
|  |  | 
|  | static ieee80211_rx_result debug_noinline | 
|  | ieee80211_rx_h_ctrl(struct ieee80211_rx_data *rx) | 
|  | { | 
|  | struct ieee80211_local *local = rx->local; | 
|  | struct ieee80211_hw *hw = &local->hw; | 
|  | struct sk_buff *skb = rx->skb; | 
|  | struct ieee80211_bar *bar = (struct ieee80211_bar *)skb->data; | 
|  | struct tid_ampdu_rx *tid_agg_rx; | 
|  | u16 start_seq_num; | 
|  | u16 tid; | 
|  |  | 
|  | if (likely(!ieee80211_is_ctl(bar->frame_control))) | 
|  | return RX_CONTINUE; | 
|  |  | 
|  | if (ieee80211_is_back_req(bar->frame_control)) { | 
|  | if (!rx->sta) | 
|  | return RX_CONTINUE; | 
|  | tid = le16_to_cpu(bar->control) >> 12; | 
|  | if (rx->sta->ampdu_mlme.tid_state_rx[tid] | 
|  | != HT_AGG_STATE_OPERATIONAL) | 
|  | return RX_CONTINUE; | 
|  | tid_agg_rx = rx->sta->ampdu_mlme.tid_rx[tid]; | 
|  |  | 
|  | start_seq_num = le16_to_cpu(bar->start_seq_num) >> 4; | 
|  |  | 
|  | /* reset session timer */ | 
|  | if (tid_agg_rx->timeout) | 
|  | mod_timer(&tid_agg_rx->session_timer, | 
|  | TU_TO_EXP_TIME(tid_agg_rx->timeout)); | 
|  |  | 
|  | /* manage reordering buffer according to requested */ | 
|  | /* sequence number */ | 
|  | rcu_read_lock(); | 
|  | ieee80211_sta_manage_reorder_buf(hw, tid_agg_rx, NULL, | 
|  | start_seq_num, 1); | 
|  | rcu_read_unlock(); | 
|  | return RX_DROP_UNUSABLE; | 
|  | } | 
|  |  | 
|  | return RX_CONTINUE; | 
|  | } | 
|  |  | 
|  | static void ieee80211_process_sa_query_req(struct ieee80211_sub_if_data *sdata, | 
|  | struct ieee80211_mgmt *mgmt, | 
|  | size_t len) | 
|  | { | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | struct sk_buff *skb; | 
|  | struct ieee80211_mgmt *resp; | 
|  |  | 
|  | if (compare_ether_addr(mgmt->da, sdata->dev->dev_addr) != 0) { | 
|  | /* Not to own unicast address */ | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (compare_ether_addr(mgmt->sa, sdata->u.sta.bssid) != 0 || | 
|  | compare_ether_addr(mgmt->bssid, sdata->u.sta.bssid) != 0) { | 
|  | /* Not from the current AP. */ | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (sdata->u.sta.state == IEEE80211_STA_MLME_ASSOCIATE) { | 
|  | /* Association in progress; ignore SA Query */ | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (len < 24 + 1 + sizeof(resp->u.action.u.sa_query)) { | 
|  | /* Too short SA Query request frame */ | 
|  | return; | 
|  | } | 
|  |  | 
|  | skb = dev_alloc_skb(sizeof(*resp) + local->hw.extra_tx_headroom); | 
|  | if (skb == NULL) | 
|  | return; | 
|  |  | 
|  | skb_reserve(skb, local->hw.extra_tx_headroom); | 
|  | resp = (struct ieee80211_mgmt *) skb_put(skb, 24); | 
|  | memset(resp, 0, 24); | 
|  | memcpy(resp->da, mgmt->sa, ETH_ALEN); | 
|  | memcpy(resp->sa, sdata->dev->dev_addr, ETH_ALEN); | 
|  | memcpy(resp->bssid, sdata->u.sta.bssid, ETH_ALEN); | 
|  | resp->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | | 
|  | IEEE80211_STYPE_ACTION); | 
|  | skb_put(skb, 1 + sizeof(resp->u.action.u.sa_query)); | 
|  | resp->u.action.category = WLAN_CATEGORY_SA_QUERY; | 
|  | resp->u.action.u.sa_query.action = WLAN_ACTION_SA_QUERY_RESPONSE; | 
|  | memcpy(resp->u.action.u.sa_query.trans_id, | 
|  | mgmt->u.action.u.sa_query.trans_id, | 
|  | WLAN_SA_QUERY_TR_ID_LEN); | 
|  |  | 
|  | ieee80211_tx_skb(sdata, skb, 1); | 
|  | } | 
|  |  | 
|  | static ieee80211_rx_result debug_noinline | 
|  | ieee80211_rx_h_action(struct ieee80211_rx_data *rx) | 
|  | { | 
|  | struct ieee80211_local *local = rx->local; | 
|  | struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(rx->dev); | 
|  | struct ieee80211_if_sta *ifsta = &sdata->u.sta; | 
|  | struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *) rx->skb->data; | 
|  | struct ieee80211_bss *bss; | 
|  | int len = rx->skb->len; | 
|  |  | 
|  | if (!ieee80211_is_action(mgmt->frame_control)) | 
|  | return RX_CONTINUE; | 
|  |  | 
|  | if (!rx->sta) | 
|  | return RX_DROP_MONITOR; | 
|  |  | 
|  | if (!(rx->flags & IEEE80211_RX_RA_MATCH)) | 
|  | return RX_DROP_MONITOR; | 
|  |  | 
|  | if (ieee80211_drop_unencrypted(rx, mgmt->frame_control)) | 
|  | return RX_DROP_MONITOR; | 
|  |  | 
|  | /* all categories we currently handle have action_code */ | 
|  | if (len < IEEE80211_MIN_ACTION_SIZE + 1) | 
|  | return RX_DROP_MONITOR; | 
|  |  | 
|  | switch (mgmt->u.action.category) { | 
|  | case WLAN_CATEGORY_BACK: | 
|  | /* | 
|  | * The aggregation code is not prepared to handle | 
|  | * anything but STA/AP due to the BSSID handling; | 
|  | * IBSS could work in the code but isn't supported | 
|  | * by drivers or the standard. | 
|  | */ | 
|  | if (sdata->vif.type != NL80211_IFTYPE_STATION && | 
|  | sdata->vif.type != NL80211_IFTYPE_AP_VLAN && | 
|  | sdata->vif.type != NL80211_IFTYPE_AP) | 
|  | return RX_DROP_MONITOR; | 
|  |  | 
|  | switch (mgmt->u.action.u.addba_req.action_code) { | 
|  | case WLAN_ACTION_ADDBA_REQ: | 
|  | if (len < (IEEE80211_MIN_ACTION_SIZE + | 
|  | sizeof(mgmt->u.action.u.addba_req))) | 
|  | return RX_DROP_MONITOR; | 
|  | ieee80211_process_addba_request(local, rx->sta, mgmt, len); | 
|  | break; | 
|  | case WLAN_ACTION_ADDBA_RESP: | 
|  | if (len < (IEEE80211_MIN_ACTION_SIZE + | 
|  | sizeof(mgmt->u.action.u.addba_resp))) | 
|  | return RX_DROP_MONITOR; | 
|  | ieee80211_process_addba_resp(local, rx->sta, mgmt, len); | 
|  | break; | 
|  | case WLAN_ACTION_DELBA: | 
|  | if (len < (IEEE80211_MIN_ACTION_SIZE + | 
|  | sizeof(mgmt->u.action.u.delba))) | 
|  | return RX_DROP_MONITOR; | 
|  | ieee80211_process_delba(sdata, rx->sta, mgmt, len); | 
|  | break; | 
|  | } | 
|  | break; | 
|  | case WLAN_CATEGORY_SPECTRUM_MGMT: | 
|  | if (local->hw.conf.channel->band != IEEE80211_BAND_5GHZ) | 
|  | return RX_DROP_MONITOR; | 
|  | switch (mgmt->u.action.u.measurement.action_code) { | 
|  | case WLAN_ACTION_SPCT_MSR_REQ: | 
|  | if (len < (IEEE80211_MIN_ACTION_SIZE + | 
|  | sizeof(mgmt->u.action.u.measurement))) | 
|  | return RX_DROP_MONITOR; | 
|  | ieee80211_process_measurement_req(sdata, mgmt, len); | 
|  | break; | 
|  | case WLAN_ACTION_SPCT_CHL_SWITCH: | 
|  | if (len < (IEEE80211_MIN_ACTION_SIZE + | 
|  | sizeof(mgmt->u.action.u.chan_switch))) | 
|  | return RX_DROP_MONITOR; | 
|  |  | 
|  | if (memcmp(mgmt->bssid, ifsta->bssid, ETH_ALEN) != 0) | 
|  | return RX_DROP_MONITOR; | 
|  |  | 
|  | bss = ieee80211_rx_bss_get(local, ifsta->bssid, | 
|  | local->hw.conf.channel->center_freq, | 
|  | ifsta->ssid, ifsta->ssid_len); | 
|  | if (!bss) | 
|  | return RX_DROP_MONITOR; | 
|  |  | 
|  | ieee80211_process_chanswitch(sdata, | 
|  | &mgmt->u.action.u.chan_switch.sw_elem, bss); | 
|  | ieee80211_rx_bss_put(local, bss); | 
|  | break; | 
|  | } | 
|  | break; | 
|  | case WLAN_CATEGORY_SA_QUERY: | 
|  | if (len < (IEEE80211_MIN_ACTION_SIZE + | 
|  | sizeof(mgmt->u.action.u.sa_query))) | 
|  | return RX_DROP_MONITOR; | 
|  | switch (mgmt->u.action.u.sa_query.action) { | 
|  | case WLAN_ACTION_SA_QUERY_REQUEST: | 
|  | if (sdata->vif.type != NL80211_IFTYPE_STATION) | 
|  | return RX_DROP_MONITOR; | 
|  | ieee80211_process_sa_query_req(sdata, mgmt, len); | 
|  | break; | 
|  | case WLAN_ACTION_SA_QUERY_RESPONSE: | 
|  | /* | 
|  | * SA Query response is currently only used in AP mode | 
|  | * and it is processed in user space. | 
|  | */ | 
|  | return RX_CONTINUE; | 
|  | } | 
|  | break; | 
|  | default: | 
|  | return RX_CONTINUE; | 
|  | } | 
|  |  | 
|  | rx->sta->rx_packets++; | 
|  | dev_kfree_skb(rx->skb); | 
|  | return RX_QUEUED; | 
|  | } | 
|  |  | 
|  | static ieee80211_rx_result debug_noinline | 
|  | ieee80211_rx_h_mgmt(struct ieee80211_rx_data *rx) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(rx->dev); | 
|  | struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *) rx->skb->data; | 
|  |  | 
|  | if (!(rx->flags & IEEE80211_RX_RA_MATCH)) | 
|  | return RX_DROP_MONITOR; | 
|  |  | 
|  | if (ieee80211_drop_unencrypted(rx, mgmt->frame_control)) | 
|  | return RX_DROP_MONITOR; | 
|  |  | 
|  | if (ieee80211_vif_is_mesh(&sdata->vif)) | 
|  | return ieee80211_mesh_rx_mgmt(sdata, rx->skb, rx->status); | 
|  |  | 
|  | if (sdata->vif.type != NL80211_IFTYPE_STATION && | 
|  | sdata->vif.type != NL80211_IFTYPE_ADHOC) | 
|  | return RX_DROP_MONITOR; | 
|  |  | 
|  | if (sdata->flags & IEEE80211_SDATA_USERSPACE_MLME) | 
|  | return RX_DROP_MONITOR; | 
|  |  | 
|  | ieee80211_sta_rx_mgmt(sdata, rx->skb, rx->status); | 
|  | return RX_QUEUED; | 
|  | } | 
|  |  | 
|  | static void ieee80211_rx_michael_mic_report(struct net_device *dev, | 
|  | struct ieee80211_hdr *hdr, | 
|  | struct ieee80211_rx_data *rx) | 
|  | { | 
|  | int keyidx; | 
|  | unsigned int hdrlen; | 
|  |  | 
|  | hdrlen = ieee80211_hdrlen(hdr->frame_control); | 
|  | if (rx->skb->len >= hdrlen + 4) | 
|  | keyidx = rx->skb->data[hdrlen + 3] >> 6; | 
|  | else | 
|  | keyidx = -1; | 
|  |  | 
|  | if (!rx->sta) { | 
|  | /* | 
|  | * Some hardware seem to generate incorrect Michael MIC | 
|  | * reports; ignore them to avoid triggering countermeasures. | 
|  | */ | 
|  | goto ignore; | 
|  | } | 
|  |  | 
|  | if (!ieee80211_has_protected(hdr->frame_control)) | 
|  | goto ignore; | 
|  |  | 
|  | if (rx->sdata->vif.type == NL80211_IFTYPE_AP && keyidx) { | 
|  | /* | 
|  | * APs with pairwise keys should never receive Michael MIC | 
|  | * errors for non-zero keyidx because these are reserved for | 
|  | * group keys and only the AP is sending real multicast | 
|  | * frames in the BSS. | 
|  | */ | 
|  | goto ignore; | 
|  | } | 
|  |  | 
|  | if (!ieee80211_is_data(hdr->frame_control) && | 
|  | !ieee80211_is_auth(hdr->frame_control)) | 
|  | goto ignore; | 
|  |  | 
|  | mac80211_ev_michael_mic_failure(rx->sdata, keyidx, hdr); | 
|  | ignore: | 
|  | dev_kfree_skb(rx->skb); | 
|  | rx->skb = NULL; | 
|  | } | 
|  |  | 
|  | /* TODO: use IEEE80211_RX_FRAGMENTED */ | 
|  | static void ieee80211_rx_cooked_monitor(struct ieee80211_rx_data *rx) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata; | 
|  | struct ieee80211_local *local = rx->local; | 
|  | struct ieee80211_rtap_hdr { | 
|  | struct ieee80211_radiotap_header hdr; | 
|  | u8 flags; | 
|  | u8 rate; | 
|  | __le16 chan_freq; | 
|  | __le16 chan_flags; | 
|  | } __attribute__ ((packed)) *rthdr; | 
|  | struct sk_buff *skb = rx->skb, *skb2; | 
|  | struct net_device *prev_dev = NULL; | 
|  | struct ieee80211_rx_status *status = rx->status; | 
|  |  | 
|  | if (rx->flags & IEEE80211_RX_CMNTR_REPORTED) | 
|  | goto out_free_skb; | 
|  |  | 
|  | if (skb_headroom(skb) < sizeof(*rthdr) && | 
|  | pskb_expand_head(skb, sizeof(*rthdr), 0, GFP_ATOMIC)) | 
|  | goto out_free_skb; | 
|  |  | 
|  | rthdr = (void *)skb_push(skb, sizeof(*rthdr)); | 
|  | memset(rthdr, 0, sizeof(*rthdr)); | 
|  | rthdr->hdr.it_len = cpu_to_le16(sizeof(*rthdr)); | 
|  | rthdr->hdr.it_present = | 
|  | cpu_to_le32((1 << IEEE80211_RADIOTAP_FLAGS) | | 
|  | (1 << IEEE80211_RADIOTAP_RATE) | | 
|  | (1 << IEEE80211_RADIOTAP_CHANNEL)); | 
|  |  | 
|  | rthdr->rate = rx->rate->bitrate / 5; | 
|  | rthdr->chan_freq = cpu_to_le16(status->freq); | 
|  |  | 
|  | if (status->band == IEEE80211_BAND_5GHZ) | 
|  | rthdr->chan_flags = cpu_to_le16(IEEE80211_CHAN_OFDM | | 
|  | IEEE80211_CHAN_5GHZ); | 
|  | else | 
|  | rthdr->chan_flags = cpu_to_le16(IEEE80211_CHAN_DYN | | 
|  | IEEE80211_CHAN_2GHZ); | 
|  |  | 
|  | skb_set_mac_header(skb, 0); | 
|  | skb->ip_summed = CHECKSUM_UNNECESSARY; | 
|  | skb->pkt_type = PACKET_OTHERHOST; | 
|  | skb->protocol = htons(ETH_P_802_2); | 
|  |  | 
|  | list_for_each_entry_rcu(sdata, &local->interfaces, list) { | 
|  | if (!netif_running(sdata->dev)) | 
|  | continue; | 
|  |  | 
|  | if (sdata->vif.type != NL80211_IFTYPE_MONITOR || | 
|  | !(sdata->u.mntr_flags & MONITOR_FLAG_COOK_FRAMES)) | 
|  | continue; | 
|  |  | 
|  | if (prev_dev) { | 
|  | skb2 = skb_clone(skb, GFP_ATOMIC); | 
|  | if (skb2) { | 
|  | skb2->dev = prev_dev; | 
|  | netif_rx(skb2); | 
|  | } | 
|  | } | 
|  |  | 
|  | prev_dev = sdata->dev; | 
|  | sdata->dev->stats.rx_packets++; | 
|  | sdata->dev->stats.rx_bytes += skb->len; | 
|  | } | 
|  |  | 
|  | if (prev_dev) { | 
|  | skb->dev = prev_dev; | 
|  | netif_rx(skb); | 
|  | skb = NULL; | 
|  | } else | 
|  | goto out_free_skb; | 
|  |  | 
|  | rx->flags |= IEEE80211_RX_CMNTR_REPORTED; | 
|  | return; | 
|  |  | 
|  | out_free_skb: | 
|  | dev_kfree_skb(skb); | 
|  | } | 
|  |  | 
|  |  | 
|  | static void ieee80211_invoke_rx_handlers(struct ieee80211_sub_if_data *sdata, | 
|  | struct ieee80211_rx_data *rx, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | ieee80211_rx_result res = RX_DROP_MONITOR; | 
|  |  | 
|  | rx->skb = skb; | 
|  | rx->sdata = sdata; | 
|  | rx->dev = sdata->dev; | 
|  |  | 
|  | #define CALL_RXH(rxh)			\ | 
|  | do {				\ | 
|  | res = rxh(rx);		\ | 
|  | if (res != RX_CONTINUE)	\ | 
|  | goto rxh_done;  \ | 
|  | } while (0); | 
|  |  | 
|  | CALL_RXH(ieee80211_rx_h_passive_scan) | 
|  | CALL_RXH(ieee80211_rx_h_check) | 
|  | CALL_RXH(ieee80211_rx_h_decrypt) | 
|  | CALL_RXH(ieee80211_rx_h_check_more_data) | 
|  | CALL_RXH(ieee80211_rx_h_sta_process) | 
|  | CALL_RXH(ieee80211_rx_h_defragment) | 
|  | CALL_RXH(ieee80211_rx_h_ps_poll) | 
|  | CALL_RXH(ieee80211_rx_h_michael_mic_verify) | 
|  | /* must be after MMIC verify so header is counted in MPDU mic */ | 
|  | CALL_RXH(ieee80211_rx_h_remove_qos_control) | 
|  | CALL_RXH(ieee80211_rx_h_amsdu) | 
|  | #ifdef CONFIG_MAC80211_MESH | 
|  | if (ieee80211_vif_is_mesh(&sdata->vif)) | 
|  | CALL_RXH(ieee80211_rx_h_mesh_fwding); | 
|  | #endif | 
|  | CALL_RXH(ieee80211_rx_h_data) | 
|  | CALL_RXH(ieee80211_rx_h_ctrl) | 
|  | CALL_RXH(ieee80211_rx_h_action) | 
|  | CALL_RXH(ieee80211_rx_h_mgmt) | 
|  |  | 
|  | #undef CALL_RXH | 
|  |  | 
|  | rxh_done: | 
|  | switch (res) { | 
|  | case RX_DROP_MONITOR: | 
|  | I802_DEBUG_INC(sdata->local->rx_handlers_drop); | 
|  | if (rx->sta) | 
|  | rx->sta->rx_dropped++; | 
|  | /* fall through */ | 
|  | case RX_CONTINUE: | 
|  | ieee80211_rx_cooked_monitor(rx); | 
|  | break; | 
|  | case RX_DROP_UNUSABLE: | 
|  | I802_DEBUG_INC(sdata->local->rx_handlers_drop); | 
|  | if (rx->sta) | 
|  | rx->sta->rx_dropped++; | 
|  | dev_kfree_skb(rx->skb); | 
|  | break; | 
|  | case RX_QUEUED: | 
|  | I802_DEBUG_INC(sdata->local->rx_handlers_queued); | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* main receive path */ | 
|  |  | 
|  | static int prepare_for_handlers(struct ieee80211_sub_if_data *sdata, | 
|  | struct ieee80211_rx_data *rx, | 
|  | struct ieee80211_hdr *hdr) | 
|  | { | 
|  | u8 *bssid = ieee80211_get_bssid(hdr, rx->skb->len, sdata->vif.type); | 
|  | int multicast = is_multicast_ether_addr(hdr->addr1); | 
|  |  | 
|  | switch (sdata->vif.type) { | 
|  | case NL80211_IFTYPE_STATION: | 
|  | if (!bssid) | 
|  | return 0; | 
|  | if (!ieee80211_bssid_match(bssid, sdata->u.sta.bssid)) { | 
|  | if (!(rx->flags & IEEE80211_RX_IN_SCAN)) | 
|  | return 0; | 
|  | rx->flags &= ~IEEE80211_RX_RA_MATCH; | 
|  | } else if (!multicast && | 
|  | compare_ether_addr(sdata->dev->dev_addr, | 
|  | hdr->addr1) != 0) { | 
|  | if (!(sdata->dev->flags & IFF_PROMISC)) | 
|  | return 0; | 
|  | rx->flags &= ~IEEE80211_RX_RA_MATCH; | 
|  | } | 
|  | break; | 
|  | case NL80211_IFTYPE_ADHOC: | 
|  | if (!bssid) | 
|  | return 0; | 
|  | if (ieee80211_is_beacon(hdr->frame_control)) { | 
|  | return 1; | 
|  | } | 
|  | else if (!ieee80211_bssid_match(bssid, sdata->u.sta.bssid)) { | 
|  | if (!(rx->flags & IEEE80211_RX_IN_SCAN)) | 
|  | return 0; | 
|  | rx->flags &= ~IEEE80211_RX_RA_MATCH; | 
|  | } else if (!multicast && | 
|  | compare_ether_addr(sdata->dev->dev_addr, | 
|  | hdr->addr1) != 0) { | 
|  | if (!(sdata->dev->flags & IFF_PROMISC)) | 
|  | return 0; | 
|  | rx->flags &= ~IEEE80211_RX_RA_MATCH; | 
|  | } else if (!rx->sta) { | 
|  | int rate_idx; | 
|  | if (rx->status->flag & RX_FLAG_HT) | 
|  | rate_idx = 0; /* TODO: HT rates */ | 
|  | else | 
|  | rate_idx = rx->status->rate_idx; | 
|  | rx->sta = ieee80211_ibss_add_sta(sdata, bssid, hdr->addr2, | 
|  | BIT(rate_idx)); | 
|  | } | 
|  | break; | 
|  | case NL80211_IFTYPE_MESH_POINT: | 
|  | if (!multicast && | 
|  | compare_ether_addr(sdata->dev->dev_addr, | 
|  | hdr->addr1) != 0) { | 
|  | if (!(sdata->dev->flags & IFF_PROMISC)) | 
|  | return 0; | 
|  |  | 
|  | rx->flags &= ~IEEE80211_RX_RA_MATCH; | 
|  | } | 
|  | break; | 
|  | case NL80211_IFTYPE_AP_VLAN: | 
|  | case NL80211_IFTYPE_AP: | 
|  | if (!bssid) { | 
|  | if (compare_ether_addr(sdata->dev->dev_addr, | 
|  | hdr->addr1)) | 
|  | return 0; | 
|  | } else if (!ieee80211_bssid_match(bssid, | 
|  | sdata->dev->dev_addr)) { | 
|  | if (!(rx->flags & IEEE80211_RX_IN_SCAN)) | 
|  | return 0; | 
|  | rx->flags &= ~IEEE80211_RX_RA_MATCH; | 
|  | } | 
|  | break; | 
|  | case NL80211_IFTYPE_WDS: | 
|  | if (bssid || !ieee80211_is_data(hdr->frame_control)) | 
|  | return 0; | 
|  | if (compare_ether_addr(sdata->u.wds.remote_addr, hdr->addr2)) | 
|  | return 0; | 
|  | break; | 
|  | case NL80211_IFTYPE_MONITOR: | 
|  | /* take everything */ | 
|  | break; | 
|  | case NL80211_IFTYPE_UNSPECIFIED: | 
|  | case __NL80211_IFTYPE_AFTER_LAST: | 
|  | /* should never get here */ | 
|  | WARN_ON(1); | 
|  | break; | 
|  | } | 
|  |  | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This is the actual Rx frames handler. as it blongs to Rx path it must | 
|  | * be called with rcu_read_lock protection. | 
|  | */ | 
|  | static void __ieee80211_rx_handle_packet(struct ieee80211_hw *hw, | 
|  | struct sk_buff *skb, | 
|  | struct ieee80211_rx_status *status, | 
|  | struct ieee80211_rate *rate) | 
|  | { | 
|  | struct ieee80211_local *local = hw_to_local(hw); | 
|  | struct ieee80211_sub_if_data *sdata; | 
|  | struct ieee80211_hdr *hdr; | 
|  | struct ieee80211_rx_data rx; | 
|  | int prepares; | 
|  | struct ieee80211_sub_if_data *prev = NULL; | 
|  | struct sk_buff *skb_new; | 
|  |  | 
|  | hdr = (struct ieee80211_hdr *)skb->data; | 
|  | memset(&rx, 0, sizeof(rx)); | 
|  | rx.skb = skb; | 
|  | rx.local = local; | 
|  |  | 
|  | rx.status = status; | 
|  | rx.rate = rate; | 
|  |  | 
|  | if (ieee80211_is_data(hdr->frame_control) || ieee80211_is_mgmt(hdr->frame_control)) | 
|  | local->dot11ReceivedFragmentCount++; | 
|  |  | 
|  | rx.sta = sta_info_get(local, hdr->addr2); | 
|  | if (rx.sta) { | 
|  | rx.sdata = rx.sta->sdata; | 
|  | rx.dev = rx.sta->sdata->dev; | 
|  | } | 
|  |  | 
|  | if ((status->flag & RX_FLAG_MMIC_ERROR)) { | 
|  | ieee80211_rx_michael_mic_report(local->mdev, hdr, &rx); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (unlikely(local->sw_scanning || local->hw_scanning)) | 
|  | rx.flags |= IEEE80211_RX_IN_SCAN; | 
|  |  | 
|  | ieee80211_parse_qos(&rx); | 
|  | ieee80211_verify_alignment(&rx); | 
|  |  | 
|  | skb = rx.skb; | 
|  |  | 
|  | list_for_each_entry_rcu(sdata, &local->interfaces, list) { | 
|  | if (!netif_running(sdata->dev)) | 
|  | continue; | 
|  |  | 
|  | if (sdata->vif.type == NL80211_IFTYPE_MONITOR) | 
|  | continue; | 
|  |  | 
|  | rx.flags |= IEEE80211_RX_RA_MATCH; | 
|  | prepares = prepare_for_handlers(sdata, &rx, hdr); | 
|  |  | 
|  | if (!prepares) | 
|  | continue; | 
|  |  | 
|  | /* | 
|  | * frame is destined for this interface, but if it's not | 
|  | * also for the previous one we handle that after the | 
|  | * loop to avoid copying the SKB once too much | 
|  | */ | 
|  |  | 
|  | if (!prev) { | 
|  | prev = sdata; | 
|  | continue; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * frame was destined for the previous interface | 
|  | * so invoke RX handlers for it | 
|  | */ | 
|  |  | 
|  | skb_new = skb_copy(skb, GFP_ATOMIC); | 
|  | if (!skb_new) { | 
|  | if (net_ratelimit()) | 
|  | printk(KERN_DEBUG "%s: failed to copy " | 
|  | "multicast frame for %s\n", | 
|  | wiphy_name(local->hw.wiphy), | 
|  | prev->dev->name); | 
|  | continue; | 
|  | } | 
|  | ieee80211_invoke_rx_handlers(prev, &rx, skb_new); | 
|  | prev = sdata; | 
|  | } | 
|  | if (prev) | 
|  | ieee80211_invoke_rx_handlers(prev, &rx, skb); | 
|  | else | 
|  | dev_kfree_skb(skb); | 
|  | } | 
|  |  | 
|  | #define SEQ_MODULO 0x1000 | 
|  | #define SEQ_MASK   0xfff | 
|  |  | 
|  | static inline int seq_less(u16 sq1, u16 sq2) | 
|  | { | 
|  | return ((sq1 - sq2) & SEQ_MASK) > (SEQ_MODULO >> 1); | 
|  | } | 
|  |  | 
|  | static inline u16 seq_inc(u16 sq) | 
|  | { | 
|  | return (sq + 1) & SEQ_MASK; | 
|  | } | 
|  |  | 
|  | static inline u16 seq_sub(u16 sq1, u16 sq2) | 
|  | { | 
|  | return (sq1 - sq2) & SEQ_MASK; | 
|  | } | 
|  |  | 
|  |  | 
|  | /* | 
|  | * As it function blongs to Rx path it must be called with | 
|  | * the proper rcu_read_lock protection for its flow. | 
|  | */ | 
|  | static u8 ieee80211_sta_manage_reorder_buf(struct ieee80211_hw *hw, | 
|  | struct tid_ampdu_rx *tid_agg_rx, | 
|  | struct sk_buff *skb, | 
|  | u16 mpdu_seq_num, | 
|  | int bar_req) | 
|  | { | 
|  | struct ieee80211_local *local = hw_to_local(hw); | 
|  | struct ieee80211_rx_status status; | 
|  | u16 head_seq_num, buf_size; | 
|  | int index; | 
|  | struct ieee80211_supported_band *sband; | 
|  | struct ieee80211_rate *rate; | 
|  |  | 
|  | buf_size = tid_agg_rx->buf_size; | 
|  | head_seq_num = tid_agg_rx->head_seq_num; | 
|  |  | 
|  | /* frame with out of date sequence number */ | 
|  | if (seq_less(mpdu_seq_num, head_seq_num)) { | 
|  | dev_kfree_skb(skb); | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | /* if frame sequence number exceeds our buffering window size or | 
|  | * block Ack Request arrived - release stored frames */ | 
|  | if ((!seq_less(mpdu_seq_num, head_seq_num + buf_size)) || (bar_req)) { | 
|  | /* new head to the ordering buffer */ | 
|  | if (bar_req) | 
|  | head_seq_num = mpdu_seq_num; | 
|  | else | 
|  | head_seq_num = | 
|  | seq_inc(seq_sub(mpdu_seq_num, buf_size)); | 
|  | /* release stored frames up to new head to stack */ | 
|  | while (seq_less(tid_agg_rx->head_seq_num, head_seq_num)) { | 
|  | index = seq_sub(tid_agg_rx->head_seq_num, | 
|  | tid_agg_rx->ssn) | 
|  | % tid_agg_rx->buf_size; | 
|  |  | 
|  | if (tid_agg_rx->reorder_buf[index]) { | 
|  | /* release the reordered frames to stack */ | 
|  | memcpy(&status, | 
|  | tid_agg_rx->reorder_buf[index]->cb, | 
|  | sizeof(status)); | 
|  | sband = local->hw.wiphy->bands[status.band]; | 
|  | if (status.flag & RX_FLAG_HT) { | 
|  | /* TODO: HT rates */ | 
|  | rate = sband->bitrates; | 
|  | } else { | 
|  | rate = &sband->bitrates | 
|  | [status.rate_idx]; | 
|  | } | 
|  | __ieee80211_rx_handle_packet(hw, | 
|  | tid_agg_rx->reorder_buf[index], | 
|  | &status, rate); | 
|  | tid_agg_rx->stored_mpdu_num--; | 
|  | tid_agg_rx->reorder_buf[index] = NULL; | 
|  | } | 
|  | tid_agg_rx->head_seq_num = | 
|  | seq_inc(tid_agg_rx->head_seq_num); | 
|  | } | 
|  | if (bar_req) | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | /* now the new frame is always in the range of the reordering */ | 
|  | /* buffer window */ | 
|  | index = seq_sub(mpdu_seq_num, tid_agg_rx->ssn) | 
|  | % tid_agg_rx->buf_size; | 
|  | /* check if we already stored this frame */ | 
|  | if (tid_agg_rx->reorder_buf[index]) { | 
|  | dev_kfree_skb(skb); | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | /* if arrived mpdu is in the right order and nothing else stored */ | 
|  | /* release it immediately */ | 
|  | if (mpdu_seq_num == tid_agg_rx->head_seq_num && | 
|  | tid_agg_rx->stored_mpdu_num == 0) { | 
|  | tid_agg_rx->head_seq_num = | 
|  | seq_inc(tid_agg_rx->head_seq_num); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* put the frame in the reordering buffer */ | 
|  | tid_agg_rx->reorder_buf[index] = skb; | 
|  | tid_agg_rx->stored_mpdu_num++; | 
|  | /* release the buffer until next missing frame */ | 
|  | index = seq_sub(tid_agg_rx->head_seq_num, tid_agg_rx->ssn) | 
|  | % tid_agg_rx->buf_size; | 
|  | while (tid_agg_rx->reorder_buf[index]) { | 
|  | /* release the reordered frame back to stack */ | 
|  | memcpy(&status, tid_agg_rx->reorder_buf[index]->cb, | 
|  | sizeof(status)); | 
|  | sband = local->hw.wiphy->bands[status.band]; | 
|  | if (status.flag & RX_FLAG_HT) | 
|  | rate = sband->bitrates; /* TODO: HT rates */ | 
|  | else | 
|  | rate = &sband->bitrates[status.rate_idx]; | 
|  | __ieee80211_rx_handle_packet(hw, tid_agg_rx->reorder_buf[index], | 
|  | &status, rate); | 
|  | tid_agg_rx->stored_mpdu_num--; | 
|  | tid_agg_rx->reorder_buf[index] = NULL; | 
|  | tid_agg_rx->head_seq_num = seq_inc(tid_agg_rx->head_seq_num); | 
|  | index =	seq_sub(tid_agg_rx->head_seq_num, | 
|  | tid_agg_rx->ssn) % tid_agg_rx->buf_size; | 
|  | } | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | static u8 ieee80211_rx_reorder_ampdu(struct ieee80211_local *local, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct ieee80211_hw *hw = &local->hw; | 
|  | struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; | 
|  | struct sta_info *sta; | 
|  | struct tid_ampdu_rx *tid_agg_rx; | 
|  | u16 sc; | 
|  | u16 mpdu_seq_num; | 
|  | u8 ret = 0; | 
|  | int tid; | 
|  |  | 
|  | sta = sta_info_get(local, hdr->addr2); | 
|  | if (!sta) | 
|  | return ret; | 
|  |  | 
|  | /* filter the QoS data rx stream according to | 
|  | * STA/TID and check if this STA/TID is on aggregation */ | 
|  | if (!ieee80211_is_data_qos(hdr->frame_control)) | 
|  | goto end_reorder; | 
|  |  | 
|  | tid = *ieee80211_get_qos_ctl(hdr) & IEEE80211_QOS_CTL_TID_MASK; | 
|  |  | 
|  | if (sta->ampdu_mlme.tid_state_rx[tid] != HT_AGG_STATE_OPERATIONAL) | 
|  | goto end_reorder; | 
|  |  | 
|  | tid_agg_rx = sta->ampdu_mlme.tid_rx[tid]; | 
|  |  | 
|  | /* qos null data frames are excluded */ | 
|  | if (unlikely(hdr->frame_control & cpu_to_le16(IEEE80211_STYPE_NULLFUNC))) | 
|  | goto end_reorder; | 
|  |  | 
|  | /* new un-ordered ampdu frame - process it */ | 
|  |  | 
|  | /* reset session timer */ | 
|  | if (tid_agg_rx->timeout) | 
|  | mod_timer(&tid_agg_rx->session_timer, | 
|  | TU_TO_EXP_TIME(tid_agg_rx->timeout)); | 
|  |  | 
|  | /* if this mpdu is fragmented - terminate rx aggregation session */ | 
|  | sc = le16_to_cpu(hdr->seq_ctrl); | 
|  | if (sc & IEEE80211_SCTL_FRAG) { | 
|  | ieee80211_sta_stop_rx_ba_session(sta->sdata, sta->sta.addr, | 
|  | tid, 0, WLAN_REASON_QSTA_REQUIRE_SETUP); | 
|  | ret = 1; | 
|  | goto end_reorder; | 
|  | } | 
|  |  | 
|  | /* according to mpdu sequence number deal with reordering buffer */ | 
|  | mpdu_seq_num = (sc & IEEE80211_SCTL_SEQ) >> 4; | 
|  | ret = ieee80211_sta_manage_reorder_buf(hw, tid_agg_rx, skb, | 
|  | mpdu_seq_num, 0); | 
|  | end_reorder: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This is the receive path handler. It is called by a low level driver when an | 
|  | * 802.11 MPDU is received from the hardware. | 
|  | */ | 
|  | void __ieee80211_rx(struct ieee80211_hw *hw, struct sk_buff *skb, | 
|  | struct ieee80211_rx_status *status) | 
|  | { | 
|  | struct ieee80211_local *local = hw_to_local(hw); | 
|  | struct ieee80211_rate *rate = NULL; | 
|  | struct ieee80211_supported_band *sband; | 
|  |  | 
|  | if (status->band < 0 || | 
|  | status->band >= IEEE80211_NUM_BANDS) { | 
|  | WARN_ON(1); | 
|  | return; | 
|  | } | 
|  |  | 
|  | sband = local->hw.wiphy->bands[status->band]; | 
|  | if (!sband) { | 
|  | WARN_ON(1); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (status->flag & RX_FLAG_HT) { | 
|  | /* rate_idx is MCS index */ | 
|  | if (WARN_ON(status->rate_idx < 0 || | 
|  | status->rate_idx >= 76)) | 
|  | return; | 
|  | /* HT rates are not in the table - use the highest legacy rate | 
|  | * for now since other parts of mac80211 may not yet be fully | 
|  | * MCS aware. */ | 
|  | rate = &sband->bitrates[sband->n_bitrates - 1]; | 
|  | } else { | 
|  | if (WARN_ON(status->rate_idx < 0 || | 
|  | status->rate_idx >= sband->n_bitrates)) | 
|  | return; | 
|  | rate = &sband->bitrates[status->rate_idx]; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * key references and virtual interfaces are protected using RCU | 
|  | * and this requires that we are in a read-side RCU section during | 
|  | * receive processing | 
|  | */ | 
|  | rcu_read_lock(); | 
|  |  | 
|  | /* | 
|  | * Frames with failed FCS/PLCP checksum are not returned, | 
|  | * all other frames are returned without radiotap header | 
|  | * if it was previously present. | 
|  | * Also, frames with less than 16 bytes are dropped. | 
|  | */ | 
|  | skb = ieee80211_rx_monitor(local, skb, status, rate); | 
|  | if (!skb) { | 
|  | rcu_read_unlock(); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (!ieee80211_rx_reorder_ampdu(local, skb)) | 
|  | __ieee80211_rx_handle_packet(hw, skb, status, rate); | 
|  |  | 
|  | rcu_read_unlock(); | 
|  | } | 
|  | EXPORT_SYMBOL(__ieee80211_rx); | 
|  |  | 
|  | /* This is a version of the rx handler that can be called from hard irq | 
|  | * context. Post the skb on the queue and schedule the tasklet */ | 
|  | void ieee80211_rx_irqsafe(struct ieee80211_hw *hw, struct sk_buff *skb, | 
|  | struct ieee80211_rx_status *status) | 
|  | { | 
|  | struct ieee80211_local *local = hw_to_local(hw); | 
|  |  | 
|  | BUILD_BUG_ON(sizeof(struct ieee80211_rx_status) > sizeof(skb->cb)); | 
|  |  | 
|  | skb->dev = local->mdev; | 
|  | /* copy status into skb->cb for use by tasklet */ | 
|  | memcpy(skb->cb, status, sizeof(*status)); | 
|  | skb->pkt_type = IEEE80211_RX_MSG; | 
|  | skb_queue_tail(&local->skb_queue, skb); | 
|  | tasklet_schedule(&local->tasklet); | 
|  | } | 
|  | EXPORT_SYMBOL(ieee80211_rx_irqsafe); |