| /* |
| * OneNAND driver for OMAP2 / OMAP3 |
| * |
| * Copyright © 2005-2006 Nokia Corporation |
| * |
| * Author: Jarkko Lavinen <jarkko.lavinen@nokia.com> and Juha Yrjölä |
| * IRQ and DMA support written by Timo Teras |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 as published by |
| * the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along with |
| * this program; see the file COPYING. If not, write to the Free Software |
| * Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
| * |
| */ |
| |
| #include <linux/device.h> |
| #include <linux/module.h> |
| #include <linux/mtd/mtd.h> |
| #include <linux/mtd/onenand.h> |
| #include <linux/mtd/partitions.h> |
| #include <linux/of_device.h> |
| #include <linux/omap-gpmc.h> |
| #include <linux/platform_device.h> |
| #include <linux/interrupt.h> |
| #include <linux/delay.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/dmaengine.h> |
| #include <linux/io.h> |
| #include <linux/slab.h> |
| #include <linux/gpio/consumer.h> |
| |
| #include <asm/mach/flash.h> |
| |
| #define DRIVER_NAME "omap2-onenand" |
| |
| #define ONENAND_BUFRAM_SIZE (1024 * 5) |
| |
| struct omap2_onenand { |
| struct platform_device *pdev; |
| int gpmc_cs; |
| unsigned long phys_base; |
| struct gpio_desc *int_gpiod; |
| struct mtd_info mtd; |
| struct onenand_chip onenand; |
| struct completion irq_done; |
| struct completion dma_done; |
| struct dma_chan *dma_chan; |
| }; |
| |
| static void omap2_onenand_dma_complete_func(void *completion) |
| { |
| complete(completion); |
| } |
| |
| static irqreturn_t omap2_onenand_interrupt(int irq, void *dev_id) |
| { |
| struct omap2_onenand *c = dev_id; |
| |
| complete(&c->irq_done); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static inline unsigned short read_reg(struct omap2_onenand *c, int reg) |
| { |
| return readw(c->onenand.base + reg); |
| } |
| |
| static inline void write_reg(struct omap2_onenand *c, unsigned short value, |
| int reg) |
| { |
| writew(value, c->onenand.base + reg); |
| } |
| |
| static int omap2_onenand_set_cfg(struct omap2_onenand *c, |
| bool sr, bool sw, |
| int latency, int burst_len) |
| { |
| unsigned short reg = ONENAND_SYS_CFG1_RDY | ONENAND_SYS_CFG1_INT; |
| |
| reg |= latency << ONENAND_SYS_CFG1_BRL_SHIFT; |
| |
| switch (burst_len) { |
| case 0: /* continuous */ |
| break; |
| case 4: |
| reg |= ONENAND_SYS_CFG1_BL_4; |
| break; |
| case 8: |
| reg |= ONENAND_SYS_CFG1_BL_8; |
| break; |
| case 16: |
| reg |= ONENAND_SYS_CFG1_BL_16; |
| break; |
| case 32: |
| reg |= ONENAND_SYS_CFG1_BL_32; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| if (latency > 5) |
| reg |= ONENAND_SYS_CFG1_HF; |
| if (latency > 7) |
| reg |= ONENAND_SYS_CFG1_VHF; |
| if (sr) |
| reg |= ONENAND_SYS_CFG1_SYNC_READ; |
| if (sw) |
| reg |= ONENAND_SYS_CFG1_SYNC_WRITE; |
| |
| write_reg(c, reg, ONENAND_REG_SYS_CFG1); |
| |
| return 0; |
| } |
| |
| static int omap2_onenand_get_freq(int ver) |
| { |
| switch ((ver >> 4) & 0xf) { |
| case 0: |
| return 40; |
| case 1: |
| return 54; |
| case 2: |
| return 66; |
| case 3: |
| return 83; |
| case 4: |
| return 104; |
| } |
| |
| return -EINVAL; |
| } |
| |
| static void wait_err(char *msg, int state, unsigned int ctrl, unsigned int intr) |
| { |
| printk(KERN_ERR "onenand_wait: %s! state %d ctrl 0x%04x intr 0x%04x\n", |
| msg, state, ctrl, intr); |
| } |
| |
| static void wait_warn(char *msg, int state, unsigned int ctrl, |
| unsigned int intr) |
| { |
| printk(KERN_WARNING "onenand_wait: %s! state %d ctrl 0x%04x " |
| "intr 0x%04x\n", msg, state, ctrl, intr); |
| } |
| |
| static int omap2_onenand_wait(struct mtd_info *mtd, int state) |
| { |
| struct omap2_onenand *c = container_of(mtd, struct omap2_onenand, mtd); |
| struct onenand_chip *this = mtd->priv; |
| unsigned int intr = 0; |
| unsigned int ctrl, ctrl_mask; |
| unsigned long timeout; |
| u32 syscfg; |
| |
| if (state == FL_RESETING || state == FL_PREPARING_ERASE || |
| state == FL_VERIFYING_ERASE) { |
| int i = 21; |
| unsigned int intr_flags = ONENAND_INT_MASTER; |
| |
| switch (state) { |
| case FL_RESETING: |
| intr_flags |= ONENAND_INT_RESET; |
| break; |
| case FL_PREPARING_ERASE: |
| intr_flags |= ONENAND_INT_ERASE; |
| break; |
| case FL_VERIFYING_ERASE: |
| i = 101; |
| break; |
| } |
| |
| while (--i) { |
| udelay(1); |
| intr = read_reg(c, ONENAND_REG_INTERRUPT); |
| if (intr & ONENAND_INT_MASTER) |
| break; |
| } |
| ctrl = read_reg(c, ONENAND_REG_CTRL_STATUS); |
| if (ctrl & ONENAND_CTRL_ERROR) { |
| wait_err("controller error", state, ctrl, intr); |
| return -EIO; |
| } |
| if ((intr & intr_flags) == intr_flags) |
| return 0; |
| /* Continue in wait for interrupt branch */ |
| } |
| |
| if (state != FL_READING) { |
| int result; |
| |
| /* Turn interrupts on */ |
| syscfg = read_reg(c, ONENAND_REG_SYS_CFG1); |
| if (!(syscfg & ONENAND_SYS_CFG1_IOBE)) { |
| syscfg |= ONENAND_SYS_CFG1_IOBE; |
| write_reg(c, syscfg, ONENAND_REG_SYS_CFG1); |
| /* Add a delay to let GPIO settle */ |
| syscfg = read_reg(c, ONENAND_REG_SYS_CFG1); |
| } |
| |
| reinit_completion(&c->irq_done); |
| result = gpiod_get_value(c->int_gpiod); |
| if (result < 0) { |
| ctrl = read_reg(c, ONENAND_REG_CTRL_STATUS); |
| intr = read_reg(c, ONENAND_REG_INTERRUPT); |
| wait_err("gpio error", state, ctrl, intr); |
| return result; |
| } else if (result == 0) { |
| int retry_cnt = 0; |
| retry: |
| if (!wait_for_completion_io_timeout(&c->irq_done, |
| msecs_to_jiffies(20))) { |
| /* Timeout after 20ms */ |
| ctrl = read_reg(c, ONENAND_REG_CTRL_STATUS); |
| if (ctrl & ONENAND_CTRL_ONGO && |
| !this->ongoing) { |
| /* |
| * The operation seems to be still going |
| * so give it some more time. |
| */ |
| retry_cnt += 1; |
| if (retry_cnt < 3) |
| goto retry; |
| intr = read_reg(c, |
| ONENAND_REG_INTERRUPT); |
| wait_err("timeout", state, ctrl, intr); |
| return -EIO; |
| } |
| intr = read_reg(c, ONENAND_REG_INTERRUPT); |
| if ((intr & ONENAND_INT_MASTER) == 0) |
| wait_warn("timeout", state, ctrl, intr); |
| } |
| } |
| } else { |
| int retry_cnt = 0; |
| |
| /* Turn interrupts off */ |
| syscfg = read_reg(c, ONENAND_REG_SYS_CFG1); |
| syscfg &= ~ONENAND_SYS_CFG1_IOBE; |
| write_reg(c, syscfg, ONENAND_REG_SYS_CFG1); |
| |
| timeout = jiffies + msecs_to_jiffies(20); |
| while (1) { |
| if (time_before(jiffies, timeout)) { |
| intr = read_reg(c, ONENAND_REG_INTERRUPT); |
| if (intr & ONENAND_INT_MASTER) |
| break; |
| } else { |
| /* Timeout after 20ms */ |
| ctrl = read_reg(c, ONENAND_REG_CTRL_STATUS); |
| if (ctrl & ONENAND_CTRL_ONGO) { |
| /* |
| * The operation seems to be still going |
| * so give it some more time. |
| */ |
| retry_cnt += 1; |
| if (retry_cnt < 3) { |
| timeout = jiffies + |
| msecs_to_jiffies(20); |
| continue; |
| } |
| } |
| break; |
| } |
| } |
| } |
| |
| intr = read_reg(c, ONENAND_REG_INTERRUPT); |
| ctrl = read_reg(c, ONENAND_REG_CTRL_STATUS); |
| |
| if (intr & ONENAND_INT_READ) { |
| int ecc = read_reg(c, ONENAND_REG_ECC_STATUS); |
| |
| if (ecc) { |
| unsigned int addr1, addr8; |
| |
| addr1 = read_reg(c, ONENAND_REG_START_ADDRESS1); |
| addr8 = read_reg(c, ONENAND_REG_START_ADDRESS8); |
| if (ecc & ONENAND_ECC_2BIT_ALL) { |
| printk(KERN_ERR "onenand_wait: ECC error = " |
| "0x%04x, addr1 %#x, addr8 %#x\n", |
| ecc, addr1, addr8); |
| mtd->ecc_stats.failed++; |
| return -EBADMSG; |
| } else if (ecc & ONENAND_ECC_1BIT_ALL) { |
| printk(KERN_NOTICE "onenand_wait: correctable " |
| "ECC error = 0x%04x, addr1 %#x, " |
| "addr8 %#x\n", ecc, addr1, addr8); |
| mtd->ecc_stats.corrected++; |
| } |
| } |
| } else if (state == FL_READING) { |
| wait_err("timeout", state, ctrl, intr); |
| return -EIO; |
| } |
| |
| if (ctrl & ONENAND_CTRL_ERROR) { |
| wait_err("controller error", state, ctrl, intr); |
| if (ctrl & ONENAND_CTRL_LOCK) |
| printk(KERN_ERR "onenand_wait: " |
| "Device is write protected!!!\n"); |
| return -EIO; |
| } |
| |
| ctrl_mask = 0xFE9F; |
| if (this->ongoing) |
| ctrl_mask &= ~0x8000; |
| |
| if (ctrl & ctrl_mask) |
| wait_warn("unexpected controller status", state, ctrl, intr); |
| |
| return 0; |
| } |
| |
| static inline int omap2_onenand_bufferram_offset(struct mtd_info *mtd, int area) |
| { |
| struct onenand_chip *this = mtd->priv; |
| |
| if (ONENAND_CURRENT_BUFFERRAM(this)) { |
| if (area == ONENAND_DATARAM) |
| return this->writesize; |
| if (area == ONENAND_SPARERAM) |
| return mtd->oobsize; |
| } |
| |
| return 0; |
| } |
| |
| static inline int omap2_onenand_dma_transfer(struct omap2_onenand *c, |
| dma_addr_t src, dma_addr_t dst, |
| size_t count) |
| { |
| struct dma_async_tx_descriptor *tx; |
| dma_cookie_t cookie; |
| |
| tx = dmaengine_prep_dma_memcpy(c->dma_chan, dst, src, count, |
| DMA_CTRL_ACK | DMA_PREP_INTERRUPT); |
| if (!tx) { |
| dev_err(&c->pdev->dev, "Failed to prepare DMA memcpy\n"); |
| return -EIO; |
| } |
| |
| reinit_completion(&c->dma_done); |
| |
| tx->callback = omap2_onenand_dma_complete_func; |
| tx->callback_param = &c->dma_done; |
| |
| cookie = tx->tx_submit(tx); |
| if (dma_submit_error(cookie)) { |
| dev_err(&c->pdev->dev, "Failed to do DMA tx_submit\n"); |
| return -EIO; |
| } |
| |
| dma_async_issue_pending(c->dma_chan); |
| |
| if (!wait_for_completion_io_timeout(&c->dma_done, |
| msecs_to_jiffies(20))) { |
| dmaengine_terminate_sync(c->dma_chan); |
| return -ETIMEDOUT; |
| } |
| |
| return 0; |
| } |
| |
| static int omap2_onenand_read_bufferram(struct mtd_info *mtd, int area, |
| unsigned char *buffer, int offset, |
| size_t count) |
| { |
| struct omap2_onenand *c = container_of(mtd, struct omap2_onenand, mtd); |
| struct onenand_chip *this = mtd->priv; |
| struct device *dev = &c->pdev->dev; |
| void *buf = (void *)buffer; |
| dma_addr_t dma_src, dma_dst; |
| int bram_offset, err; |
| size_t xtra; |
| |
| bram_offset = omap2_onenand_bufferram_offset(mtd, area) + area + offset; |
| /* |
| * If the buffer address is not DMA-able, len is not long enough to make |
| * DMA transfers profitable or panic_write() may be in an interrupt |
| * context fallback to PIO mode. |
| */ |
| if (!virt_addr_valid(buf) || bram_offset & 3 || (size_t)buf & 3 || |
| count < 384 || in_interrupt() || oops_in_progress ) |
| goto out_copy; |
| |
| xtra = count & 3; |
| if (xtra) { |
| count -= xtra; |
| memcpy(buf + count, this->base + bram_offset + count, xtra); |
| } |
| |
| dma_dst = dma_map_single(dev, buf, count, DMA_FROM_DEVICE); |
| dma_src = c->phys_base + bram_offset; |
| |
| if (dma_mapping_error(dev, dma_dst)) { |
| dev_err(dev, "Couldn't DMA map a %d byte buffer\n", count); |
| goto out_copy; |
| } |
| |
| err = omap2_onenand_dma_transfer(c, dma_src, dma_dst, count); |
| dma_unmap_single(dev, dma_dst, count, DMA_FROM_DEVICE); |
| if (!err) |
| return 0; |
| |
| dev_err(dev, "timeout waiting for DMA\n"); |
| |
| out_copy: |
| memcpy(buf, this->base + bram_offset, count); |
| return 0; |
| } |
| |
| static int omap2_onenand_write_bufferram(struct mtd_info *mtd, int area, |
| const unsigned char *buffer, |
| int offset, size_t count) |
| { |
| struct omap2_onenand *c = container_of(mtd, struct omap2_onenand, mtd); |
| struct onenand_chip *this = mtd->priv; |
| struct device *dev = &c->pdev->dev; |
| void *buf = (void *)buffer; |
| dma_addr_t dma_src, dma_dst; |
| int bram_offset, err; |
| |
| bram_offset = omap2_onenand_bufferram_offset(mtd, area) + area + offset; |
| /* |
| * If the buffer address is not DMA-able, len is not long enough to make |
| * DMA transfers profitable or panic_write() may be in an interrupt |
| * context fallback to PIO mode. |
| */ |
| if (!virt_addr_valid(buf) || bram_offset & 3 || (size_t)buf & 3 || |
| count < 384 || in_interrupt() || oops_in_progress ) |
| goto out_copy; |
| |
| dma_src = dma_map_single(dev, buf, count, DMA_TO_DEVICE); |
| dma_dst = c->phys_base + bram_offset; |
| if (dma_mapping_error(dev, dma_src)) { |
| dev_err(dev, "Couldn't DMA map a %d byte buffer\n", count); |
| goto out_copy; |
| } |
| |
| err = omap2_onenand_dma_transfer(c, dma_src, dma_dst, count); |
| dma_unmap_page(dev, dma_src, count, DMA_TO_DEVICE); |
| if (!err) |
| return 0; |
| |
| dev_err(dev, "timeout waiting for DMA\n"); |
| |
| out_copy: |
| memcpy(this->base + bram_offset, buf, count); |
| return 0; |
| } |
| |
| static void omap2_onenand_shutdown(struct platform_device *pdev) |
| { |
| struct omap2_onenand *c = dev_get_drvdata(&pdev->dev); |
| |
| /* With certain content in the buffer RAM, the OMAP boot ROM code |
| * can recognize the flash chip incorrectly. Zero it out before |
| * soft reset. |
| */ |
| memset((__force void *)c->onenand.base, 0, ONENAND_BUFRAM_SIZE); |
| } |
| |
| static int omap2_onenand_probe(struct platform_device *pdev) |
| { |
| u32 val; |
| dma_cap_mask_t mask; |
| int freq, latency, r; |
| struct resource *res; |
| struct omap2_onenand *c; |
| struct gpmc_onenand_info info; |
| struct device *dev = &pdev->dev; |
| struct device_node *np = dev->of_node; |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!res) { |
| dev_err(dev, "error getting memory resource\n"); |
| return -EINVAL; |
| } |
| |
| r = of_property_read_u32(np, "reg", &val); |
| if (r) { |
| dev_err(dev, "reg not found in DT\n"); |
| return r; |
| } |
| |
| c = devm_kzalloc(dev, sizeof(struct omap2_onenand), GFP_KERNEL); |
| if (!c) |
| return -ENOMEM; |
| |
| init_completion(&c->irq_done); |
| init_completion(&c->dma_done); |
| c->gpmc_cs = val; |
| c->phys_base = res->start; |
| |
| c->onenand.base = devm_ioremap_resource(dev, res); |
| if (IS_ERR(c->onenand.base)) |
| return PTR_ERR(c->onenand.base); |
| |
| c->int_gpiod = devm_gpiod_get_optional(dev, "int", GPIOD_IN); |
| if (IS_ERR(c->int_gpiod)) { |
| r = PTR_ERR(c->int_gpiod); |
| /* Just try again if this happens */ |
| if (r != -EPROBE_DEFER) |
| dev_err(dev, "error getting gpio: %d\n", r); |
| return r; |
| } |
| |
| if (c->int_gpiod) { |
| r = devm_request_irq(dev, gpiod_to_irq(c->int_gpiod), |
| omap2_onenand_interrupt, |
| IRQF_TRIGGER_RISING, "onenand", c); |
| if (r) |
| return r; |
| |
| c->onenand.wait = omap2_onenand_wait; |
| } |
| |
| dma_cap_zero(mask); |
| dma_cap_set(DMA_MEMCPY, mask); |
| |
| c->dma_chan = dma_request_channel(mask, NULL, NULL); |
| if (c->dma_chan) { |
| c->onenand.read_bufferram = omap2_onenand_read_bufferram; |
| c->onenand.write_bufferram = omap2_onenand_write_bufferram; |
| } |
| |
| c->pdev = pdev; |
| c->mtd.priv = &c->onenand; |
| c->mtd.dev.parent = dev; |
| mtd_set_of_node(&c->mtd, dev->of_node); |
| |
| dev_info(dev, "initializing on CS%d (0x%08lx), va %p, %s mode\n", |
| c->gpmc_cs, c->phys_base, c->onenand.base, |
| c->dma_chan ? "DMA" : "PIO"); |
| |
| if ((r = onenand_scan(&c->mtd, 1)) < 0) |
| goto err_release_dma; |
| |
| freq = omap2_onenand_get_freq(c->onenand.version_id); |
| if (freq > 0) { |
| switch (freq) { |
| case 104: |
| latency = 7; |
| break; |
| case 83: |
| latency = 6; |
| break; |
| case 66: |
| latency = 5; |
| break; |
| case 56: |
| latency = 4; |
| break; |
| default: /* 40 MHz or lower */ |
| latency = 3; |
| break; |
| } |
| |
| r = gpmc_omap_onenand_set_timings(dev, c->gpmc_cs, |
| freq, latency, &info); |
| if (r) |
| goto err_release_onenand; |
| |
| r = omap2_onenand_set_cfg(c, info.sync_read, info.sync_write, |
| latency, info.burst_len); |
| if (r) |
| goto err_release_onenand; |
| |
| if (info.sync_read || info.sync_write) |
| dev_info(dev, "optimized timings for %d MHz\n", freq); |
| } |
| |
| r = mtd_device_register(&c->mtd, NULL, 0); |
| if (r) |
| goto err_release_onenand; |
| |
| platform_set_drvdata(pdev, c); |
| |
| return 0; |
| |
| err_release_onenand: |
| onenand_release(&c->mtd); |
| err_release_dma: |
| if (c->dma_chan) |
| dma_release_channel(c->dma_chan); |
| |
| return r; |
| } |
| |
| static int omap2_onenand_remove(struct platform_device *pdev) |
| { |
| struct omap2_onenand *c = dev_get_drvdata(&pdev->dev); |
| |
| onenand_release(&c->mtd); |
| if (c->dma_chan) |
| dma_release_channel(c->dma_chan); |
| omap2_onenand_shutdown(pdev); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id omap2_onenand_id_table[] = { |
| { .compatible = "ti,omap2-onenand", }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, omap2_onenand_id_table); |
| |
| static struct platform_driver omap2_onenand_driver = { |
| .probe = omap2_onenand_probe, |
| .remove = omap2_onenand_remove, |
| .shutdown = omap2_onenand_shutdown, |
| .driver = { |
| .name = DRIVER_NAME, |
| .of_match_table = omap2_onenand_id_table, |
| }, |
| }; |
| |
| module_platform_driver(omap2_onenand_driver); |
| |
| MODULE_ALIAS("platform:" DRIVER_NAME); |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Jarkko Lavinen <jarkko.lavinen@nokia.com>"); |
| MODULE_DESCRIPTION("Glue layer for OneNAND flash on OMAP2 / OMAP3"); |