| /* |
| * BSD LICENSE |
| * |
| * Copyright(c) 2014 Broadcom Corporation. All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in |
| * the documentation and/or other materials provided with the |
| * distribution. |
| * * Neither the name of Broadcom Corporation nor the names of its |
| * contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/interrupt-controller/irq.h> |
| #include <dt-bindings/clock/bcm-cygnus.h> |
| |
| #include "skeleton.dtsi" |
| |
| / { |
| compatible = "brcm,cygnus"; |
| model = "Broadcom Cygnus SoC"; |
| interrupt-parent = <&gic>; |
| |
| aliases { |
| ethernet0 = ð0; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu@0 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a9"; |
| next-level-cache = <&L2>; |
| reg = <0x0>; |
| }; |
| }; |
| |
| /include/ "bcm-cygnus-clock.dtsi" |
| |
| pmu { |
| compatible = "arm,cortex-a9-pmu"; |
| interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| core { |
| compatible = "simple-bus"; |
| ranges = <0x00000000 0x19000000 0x1000000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| timer@20200 { |
| compatible = "arm,cortex-a9-global-timer"; |
| reg = <0x20200 0x100>; |
| interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>; |
| clocks = <&periph_clk>; |
| }; |
| |
| gic: interrupt-controller@21000 { |
| compatible = "arm,cortex-a9-gic"; |
| #interrupt-cells = <3>; |
| #address-cells = <0>; |
| interrupt-controller; |
| reg = <0x21000 0x1000>, |
| <0x20100 0x100>; |
| }; |
| |
| L2: l2-cache { |
| compatible = "arm,pl310-cache"; |
| reg = <0x22000 0x1000>; |
| cache-unified; |
| cache-level = <2>; |
| }; |
| }; |
| |
| axi { |
| compatible = "simple-bus"; |
| ranges; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| otp: otp@301c800 { |
| compatible = "brcm,ocotp"; |
| reg = <0x0301c800 0x2c>; |
| brcm,ocotp-size = <2048>; |
| status = "disabled"; |
| }; |
| |
| pcie_phy: phy@301d0a0 { |
| compatible = "brcm,cygnus-pcie-phy"; |
| reg = <0x0301d0a0 0x14>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| pcie0_phy: phy@0 { |
| reg = <0>; |
| #phy-cells = <0>; |
| }; |
| |
| pcie1_phy: phy@1 { |
| reg = <1>; |
| #phy-cells = <0>; |
| }; |
| }; |
| |
| pinctrl: pinctrl@301d0c8 { |
| compatible = "brcm,cygnus-pinmux"; |
| reg = <0x0301d0c8 0x30>, |
| <0x0301d24c 0x2c>; |
| |
| spi_0: spi_0 { |
| function = "spi0"; |
| groups = "spi0_grp"; |
| }; |
| |
| spi_1: spi_1 { |
| function = "spi1"; |
| groups = "spi1_grp"; |
| }; |
| |
| spi_2: spi_2 { |
| function = "spi2"; |
| groups = "spi2_grp"; |
| }; |
| }; |
| |
| mailbox: mailbox@3024024 { |
| compatible = "brcm,iproc-mailbox"; |
| reg = <0x03024024 0x40>; |
| interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; |
| #interrupt-cells = <1>; |
| interrupt-controller; |
| #mbox-cells = <1>; |
| }; |
| |
| gpio_crmu: gpio@3024800 { |
| compatible = "brcm,cygnus-crmu-gpio"; |
| reg = <0x03024800 0x50>, |
| <0x03024008 0x18>; |
| ngpios = <6>; |
| #gpio-cells = <2>; |
| gpio-controller; |
| interrupt-controller; |
| interrupt-parent = <&mailbox>; |
| interrupts = <0>; |
| }; |
| |
| mdio: mdio@18002000 { |
| compatible = "brcm,iproc-mdio"; |
| reg = <0x18002000 0x8>; |
| #size-cells = <0>; |
| #address-cells = <1>; |
| status = "disabled"; |
| |
| gphy0: ethernet-phy@0 { |
| reg = <0>; |
| }; |
| |
| gphy1: ethernet-phy@1 { |
| reg = <1>; |
| }; |
| }; |
| |
| switch: switch@18007000 { |
| compatible = "brcm,bcm11360-srab", "brcm,cygnus-srab"; |
| reg = <0x18007000 0x1000>; |
| status = "disabled"; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| phy-handle = <&gphy0>; |
| phy-mode = "rgmii"; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| phy-handle = <&gphy1>; |
| phy-mode = "rgmii"; |
| }; |
| |
| port@8 { |
| reg = <8>; |
| label = "cpu"; |
| ethernet = <ð0>; |
| fixed-link { |
| speed = <1000>; |
| full-duplex; |
| }; |
| }; |
| }; |
| }; |
| |
| i2c0: i2c@18008000 { |
| compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c"; |
| reg = <0x18008000 0x100>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; |
| clock-frequency = <100000>; |
| status = "disabled"; |
| }; |
| |
| wdt0: wdt@18009000 { |
| compatible = "arm,sp805" , "arm,primecell"; |
| reg = <0x18009000 0x1000>; |
| interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&axi81_clk>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| gpio_ccm: gpio@1800a000 { |
| compatible = "brcm,cygnus-ccm-gpio"; |
| reg = <0x1800a000 0x50>, |
| <0x0301d164 0x20>; |
| ngpios = <24>; |
| #gpio-cells = <2>; |
| gpio-controller; |
| interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-controller; |
| }; |
| |
| i2c1: i2c@1800b000 { |
| compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c"; |
| reg = <0x1800b000 0x100>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; |
| clock-frequency = <100000>; |
| status = "disabled"; |
| }; |
| |
| pcie0: pcie@18012000 { |
| compatible = "brcm,iproc-pcie"; |
| reg = <0x18012000 0x1000>; |
| |
| #interrupt-cells = <1>; |
| interrupt-map-mask = <0 0 0 0>; |
| interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; |
| |
| linux,pci-domain = <0>; |
| |
| bus-range = <0x00 0xff>; |
| |
| #address-cells = <3>; |
| #size-cells = <2>; |
| device_type = "pci"; |
| ranges = <0x81000000 0 0 0x28000000 0 0x00010000 |
| 0x82000000 0 0x20000000 0x20000000 0 0x04000000>; |
| |
| phys = <&pcie0_phy>; |
| phy-names = "pcie-phy"; |
| |
| status = "disabled"; |
| |
| msi-parent = <&msi0>; |
| msi0: msi-controller { |
| compatible = "brcm,iproc-msi"; |
| msi-controller; |
| interrupt-parent = <&gic>; |
| interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| }; |
| |
| pcie1: pcie@18013000 { |
| compatible = "brcm,iproc-pcie"; |
| reg = <0x18013000 0x1000>; |
| |
| #interrupt-cells = <1>; |
| interrupt-map-mask = <0 0 0 0>; |
| interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; |
| |
| linux,pci-domain = <1>; |
| |
| bus-range = <0x00 0xff>; |
| |
| #address-cells = <3>; |
| #size-cells = <2>; |
| device_type = "pci"; |
| ranges = <0x81000000 0 0 0x48000000 0 0x00010000 |
| 0x82000000 0 0x40000000 0x40000000 0 0x04000000>; |
| |
| phys = <&pcie1_phy>; |
| phy-names = "pcie-phy"; |
| |
| status = "disabled"; |
| |
| msi-parent = <&msi1>; |
| msi1: msi-controller { |
| compatible = "brcm,iproc-msi"; |
| msi-controller; |
| interrupt-parent = <&gic>; |
| interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| }; |
| |
| dma0: dma@18018000 { |
| compatible = "arm,pl330", "arm,primecell"; |
| reg = <0x18018000 0x1000>; |
| interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&apb_clk>; |
| clock-names = "apb_pclk"; |
| #dma-cells = <1>; |
| }; |
| |
| uart0: serial@18020000 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x18020000 0x100>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&axi81_clk>; |
| clock-frequency = <100000000>; |
| status = "disabled"; |
| }; |
| |
| uart1: serial@18021000 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x18021000 0x100>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&axi81_clk>; |
| clock-frequency = <100000000>; |
| status = "disabled"; |
| }; |
| |
| uart2: serial@18022000 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x18022000 0x100>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&axi81_clk>; |
| clock-frequency = <100000000>; |
| status = "disabled"; |
| }; |
| |
| uart3: serial@18023000 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x18023000 0x100>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&axi81_clk>; |
| clock-frequency = <100000000>; |
| status = "disabled"; |
| }; |
| |
| spi0: spi@18028000 { |
| compatible = "arm,pl022", "arm,primecell"; |
| reg = <0x18028000 0x1000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-0 = <&spi_0>; |
| clocks = <&axi81_clk>; |
| clock-names = "apb_pclk"; |
| status = "disabled"; |
| }; |
| |
| spi1: spi@18029000 { |
| compatible = "arm,pl022", "arm,primecell"; |
| reg = <0x18029000 0x1000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-0 = <&spi_1>; |
| clocks = <&axi81_clk>; |
| clock-names = "apb_pclk"; |
| status = "disabled"; |
| }; |
| |
| spi2: spi@1802a000 { |
| compatible = "arm,pl022", "arm,primecell"; |
| reg = <0x1802a000 0x1000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-0 = <&spi_2>; |
| clocks = <&axi81_clk>; |
| clock-names = "apb_pclk"; |
| status = "disabled"; |
| }; |
| |
| rng: rng@18032000 { |
| compatible = "brcm,iproc-rng200"; |
| reg = <0x18032000 0x28>; |
| }; |
| |
| sdhci0: sdhci@18041000 { |
| compatible = "brcm,sdhci-iproc-cygnus"; |
| reg = <0x18041000 0x100>; |
| interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&lcpll0 BCM_CYGNUS_LCPLL0_SDIO_CLK>; |
| bus-width = <4>; |
| sdhci,auto-cmd12; |
| status = "disabled"; |
| }; |
| |
| eth0: ethernet@18042000 { |
| compatible = "brcm,amac"; |
| reg = <0x18042000 0x1000>, |
| <0x18110000 0x1000>; |
| reg-names = "amac_base", "idm_base"; |
| interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| }; |
| |
| sdhci1: sdhci@18043000 { |
| compatible = "brcm,sdhci-iproc-cygnus"; |
| reg = <0x18043000 0x100>; |
| interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&lcpll0 BCM_CYGNUS_LCPLL0_SDIO_CLK>; |
| bus-width = <4>; |
| sdhci,auto-cmd12; |
| status = "disabled"; |
| }; |
| |
| nand: nand@18046000 { |
| compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1"; |
| reg = <0x18046000 0x600>, <0xf8105408 0x600>, |
| <0x18046f00 0x20>; |
| reg-names = "nand", "iproc-idm", "iproc-ext"; |
| interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| brcm,nand-has-wp; |
| }; |
| |
| ehci0: usb@18048000 { |
| compatible = "generic-ehci"; |
| reg = <0x18048000 0x100>; |
| interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| }; |
| |
| ohci0: usb@18048800 { |
| compatible = "generic-ohci"; |
| reg = <0x18048800 0x100>; |
| interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| }; |
| |
| clcd: clcd@180a0000 { |
| compatible = "arm,pl111", "arm,primecell"; |
| reg = <0x180a0000 0x1000>; |
| interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "combined"; |
| clocks = <&axi41_clk>, <&apb_clk>; |
| clock-names = "clcdclk", "apb_pclk"; |
| status = "disabled"; |
| }; |
| |
| v3d: v3d@180a2000 { |
| compatible = "brcm,cygnus-v3d"; |
| reg = <0x180a2000 0x1000>; |
| clocks = <&mipipll BCM_CYGNUS_MIPIPLL_CH2_V3D>; |
| clock-names = "v3d_clk"; |
| interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| }; |
| |
| vc4: gpu { |
| compatible = "brcm,cygnus-vc4"; |
| }; |
| |
| gpio_asiu: gpio@180a5000 { |
| compatible = "brcm,cygnus-asiu-gpio"; |
| reg = <0x180a5000 0x668>; |
| ngpios = <146>; |
| #gpio-cells = <2>; |
| gpio-controller; |
| |
| interrupt-controller; |
| interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-ranges = <&pinctrl 0 42 1>, |
| <&pinctrl 1 44 3>, |
| <&pinctrl 4 48 1>, |
| <&pinctrl 5 50 3>, |
| <&pinctrl 8 126 1>, |
| <&pinctrl 9 155 1>, |
| <&pinctrl 10 152 1>, |
| <&pinctrl 11 154 1>, |
| <&pinctrl 12 153 1>, |
| <&pinctrl 13 127 3>, |
| <&pinctrl 16 140 1>, |
| <&pinctrl 17 145 7>, |
| <&pinctrl 24 130 10>, |
| <&pinctrl 34 141 4>, |
| <&pinctrl 38 54 1>, |
| <&pinctrl 39 56 3>, |
| <&pinctrl 42 60 3>, |
| <&pinctrl 45 64 3>, |
| <&pinctrl 48 68 2>, |
| <&pinctrl 50 84 6>, |
| <&pinctrl 56 94 6>, |
| <&pinctrl 62 72 1>, |
| <&pinctrl 63 70 1>, |
| <&pinctrl 64 80 1>, |
| <&pinctrl 65 74 3>, |
| <&pinctrl 68 78 1>, |
| <&pinctrl 69 82 1>, |
| <&pinctrl 70 156 17>, |
| <&pinctrl 87 104 12>, |
| <&pinctrl 99 102 2>, |
| <&pinctrl 101 90 4>, |
| <&pinctrl 105 116 6>, |
| <&pinctrl 111 100 2>, |
| <&pinctrl 113 122 4>, |
| <&pinctrl 123 11 1>, |
| <&pinctrl 124 38 4>, |
| <&pinctrl 128 43 1>, |
| <&pinctrl 129 47 1>, |
| <&pinctrl 130 49 1>, |
| <&pinctrl 131 53 1>, |
| <&pinctrl 132 55 1>, |
| <&pinctrl 133 59 1>, |
| <&pinctrl 134 63 1>, |
| <&pinctrl 135 67 1>, |
| <&pinctrl 136 71 1>, |
| <&pinctrl 137 73 1>, |
| <&pinctrl 138 77 1>, |
| <&pinctrl 139 79 1>, |
| <&pinctrl 140 81 1>, |
| <&pinctrl 141 83 1>, |
| <&pinctrl 142 10 1>; |
| }; |
| |
| ts_adc_syscon: ts_adc_syscon@180a6000 { |
| compatible = "brcm,iproc-ts-adc-syscon", "syscon"; |
| reg = <0x180a6000 0xc30>; |
| }; |
| |
| touchscreen: touchscreen@180a6000 { |
| compatible = "brcm,iproc-touchscreen"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ts_syscon = <&ts_adc_syscon>; |
| clocks = <&asiu_clks BCM_CYGNUS_ASIU_ADC_CLK>; |
| clock-names = "tsc_clk"; |
| interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| }; |
| |
| adc: adc@180a6000 { |
| compatible = "brcm,iproc-static-adc"; |
| #io-channel-cells = <1>; |
| io-channel-ranges; |
| adc-syscon = <&ts_adc_syscon>; |
| clocks = <&asiu_clks BCM_CYGNUS_ASIU_ADC_CLK>; |
| clock-names = "tsc_clk"; |
| interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| }; |
| |
| pwm: pwm@180aa500 { |
| compatible = "brcm,kona-pwm"; |
| reg = <0x180aa500 0xc4>; |
| #pwm-cells = <3>; |
| clocks = <&asiu_clks BCM_CYGNUS_ASIU_PWM_CLK>; |
| status = "disabled"; |
| }; |
| |
| keypad: keypad@180ac000 { |
| compatible = "brcm,bcm-keypad"; |
| reg = <0x180ac000 0x14c>; |
| interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&asiu_clks BCM_CYGNUS_ASIU_KEYPAD_CLK>; |
| clock-names = "peri_clk"; |
| clock-frequency = <31250>; |
| pull-up-enabled; |
| col-debounce-filter-period = <0>; |
| status-debounce-filter-period = <0>; |
| row-output-enabled; |
| status = "disabled"; |
| }; |
| }; |
| }; |
