Documentation/devicetree/bindings/pps/pps-gpio.txt

Device-Tree Bindings for a PPS Signal on GPIO

These properties describe a PPS (pulse-per-second) signal connected to
a GPIO pin.

Required properties:
- compatible: should be "pps-gpio"
- gpios: one PPS GPIO in the format described by ../gpio/gpio.txt

Optional properties:
- assert-falling-edge: when present, assert is indicated by a falling edge
                       (instead of by a rising edge)

Example:
	pps {
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_pps>;

		gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
		assert-falling-edge;

		compatible = "pps-gpio";
	};