Documentation/devicetree/bindings/media/samsung-fimc.txt - linux-mtk - Git at Google

 Samsung S5P/EXYNOS SoC Camera Subsystem (FIMC)
 ----------------------------------------------

 The S5P/Exynos SoC Camera subsystem comprises of multiple sub-devices
 represented by separate device tree nodes. Currently this includes: FIMC (in
 the S5P SoCs series known as CAMIF), MIPI CSIS, FIMC-LITE and FIMC-IS (ISP).

 The sub-subdevices are defined as child nodes of the common 'camera' node which
 also includes common properties of the whole subsystem not really specific to
 any single sub-device, like common camera port pins or the CAMCLK clock outputs
 for external image sensors attached to an SoC.

 Common 'camera' node
 --------------------

 Required properties:

 - compatible: must be "samsung,fimc", "simple-bus"
 - clocks: list of clock specifiers, corresponding to entries in
   the clock-names property;
 - clock-names : must contain "sclk_cam0", "sclk_cam1", "pxl_async0",
   "pxl_async1" entries, matching entries in the clocks property.

 - #clock-cells: from the common clock bindings (../clock/clock-bindings.txt),
   must be 1. A clock provider is associated with the 'camera' node and it should
   be referenced by external sensors that use clocks provided by the SoC on
   CAM_*_CLKOUT pins. The clock specifier cell stores an index of a clock.
   The indices are 0, 1 for CAM_A_CLKOUT, CAM_B_CLKOUT clocks respectively.

 - clock-output-names: from the common clock bindings, should contain names of
   clocks registered by the camera subsystem corresponding to CAM_A_CLKOUT,
   CAM_B_CLKOUT output clocks respectively.

 The pinctrl bindings defined in ../pinctrl/pinctrl-bindings.txt must be used
 to define a required pinctrl state named "default" and optional pinctrl states:
 "idle", "active-a", active-b". These optional states can be used to switch the
 camera port pinmux at runtime. The "idle" state should configure both the camera
 ports A and B into high impedance state, especially the CAMCLK clock output
 should be inactive. For the "active-a" state the camera port A must be activated
 and the port B deactivated and for the state "active-b" it should be the other
 way around.

 The 'camera' node must include at least one 'fimc' child node.


 'fimc' device nodes
 -------------------

 Required properties:

 - compatible: "samsung,s5pv210-fimc" for S5PV210, "samsung,exynos4210-fimc"
   for Exynos4210 and "samsung,exynos4212-fimc" for Exynos4x12 SoCs;
 - reg: physical base address and length of the registers set for the device;
 - interrupts: should contain FIMC interrupt;
 - clocks: list of clock specifiers, must contain an entry for each required
   entry in clock-names;
 - clock-names: must contain "fimc", "sclk_fimc" entries.
 - samsung,pix-limits: an array of maximum supported image sizes in pixels, for
   details refer to Table 2-1 in the S5PV210 SoC User Manual; The meaning of
   each cell is as follows:
   0 - scaler input horizontal size,
   1 - input horizontal size for the scaler bypassed,
   2 - REAL_WIDTH without input rotation,
   3 - REAL_HEIGHT with input rotation,
 - samsung,sysreg: a phandle to the SYSREG node.

 Each FIMC device should have an alias in the aliases node, in the form of
 fimc<n>, where <n> is an integer specifying the IP block instance.

 Optional properties:

 - clock-frequency: maximum FIMC local clock (LCLK) frequency;
 - samsung,min-pix-sizes: an array specyfing minimum image size in pixels at
   the FIMC input and output DMA, in the first and second cell respectively.
   Default value when this property is not present is <16 16>;
 - samsung,min-pix-alignment: minimum supported image height alignment (first
   cell) and the horizontal image offset (second cell). The values are in pixels
   and default to <2 1> when this property is not present;
 - samsung,mainscaler-ext: a boolean property indicating whether the FIMC IP
   supports extended image size and has CIEXTEN register;
 - samsung,rotators: a bitmask specifying whether this IP has the input and
   the output rotator. Bits 4 and 0 correspond to input and output rotator
   respectively. If a rotator is present its corresponding bit should be set.
   Default value when this property is not specified is 0x11.
 - samsung,cam-if: a bolean property indicating whether the IP block includes
   the camera input interface.
 - samsung,isp-wb: this property must be present if the IP block has the ISP
   writeback input.
 - samsung,lcd-wb: this property must be present if the IP block has the LCD
   writeback input.


 'parallel-ports' node
 ---------------------

 This node should contain child 'port' nodes specifying active parallel video
 input ports. It includes camera A and camera B inputs. 'reg' property in the
 port nodes specifies data input - 0, 1 indicates input A, B respectively.

 Optional properties

 - samsung,camclk-out (deprecated) : specifies clock output for remote sensor,
   0 - CAM_A_CLKOUT, 1 - CAM_B_CLKOUT;

 Image sensor nodes
 ------------------

 The sensor device nodes should be added to their control bus controller (e.g.
 I2C0) nodes and linked to a port node in the csis or the parallel-ports node,
 using the common video interfaces bindings, defined in video-interfaces.txt.

 Example:

 	aliases {
 		fimc0 = &fimc_0;
 	};

 	/* Parallel bus IF sensor */
 	i2c_0: i2c@13860000 {
 		s5k6aa: sensor@3c {
 			compatible = "samsung,s5k6aafx";
 			reg = <0x3c>;
 			vddio-supply = <...>;

 			clock-frequency = <24000000>;
 			clocks = <&camera 1>;
 			clock-names = "mclk";

 			port {
 				s5k6aa_ep: endpoint {
 					remote-endpoint = <&fimc0_ep>;
 					bus-width = <8>;
 					hsync-active = <0>;
 					vsync-active = <1>;
 					pclk-sample = <1>;
 				};
 			};
 		};

 		/* MIPI CSI-2 bus IF sensor */
 		s5c73m3: sensor@1a {
 			compatible = "samsung,s5c73m3";
 			reg = <0x1a>;
 			vddio-supply = <...>;

 			clock-frequency = <24000000>;
 			clocks = <&camera 0>;
 			clock-names = "mclk";

 			port {
 				s5c73m3_1: endpoint {
 					data-lanes = <1 2 3 4>;
 					remote-endpoint = <&csis0_ep>;
 				};
 			};
 		};
 	};

 	camera {
 		compatible = "samsung,fimc", "simple-bus";
 		clocks = <&clock 132>, <&clock 133>, <&clock 351>,
 			 <&clock 352>;
 		clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0",
 			      "pxl_async1";
 		#clock-cells = <1>;
 		clock-output-names = "cam_a_clkout", "cam_b_clkout";
 		pinctrl-names = "default";
 		pinctrl-0 = <&cam_port_a_clk_active>;
 		#address-cells = <1>;
 		#size-cells = <1>;

 		/* parallel camera ports */
 		parallel-ports {
 			/* camera A input */
 			port@0 {
 				reg = <0>;
 				fimc0_ep: endpoint {
 					remote-endpoint = <&s5k6aa_ep>;
 					bus-width = <8>;
 					hsync-active = <0>;
 					vsync-active = <1>;
 					pclk-sample = <1>;
 				};
 			};
 		};

 		fimc_0: fimc@11800000 {
 			compatible = "samsung,exynos4210-fimc";
 			reg = <0x11800000 0x1000>;
 			interrupts = <0 85 0>;
 		};

 		csis_0: csis@11880000 {
 			compatible = "samsung,exynos4210-csis";
 			reg = <0x11880000 0x1000>;
 			interrupts = <0 78 0>;
 			/* camera C input */
 			port@3 {
 				reg = <3>;
 				csis0_ep: endpoint {
 					remote-endpoint = <&s5c73m3_ep>;
 					data-lanes = <1 2 3 4>;
 					samsung,csis-hs-settle = <12>;
 				};
 			};
 		};
 	};

 The MIPI-CSIS device binding is defined in samsung-mipi-csis.txt.
	Samsung S5P/EXYNOS SoC Camera Subsystem (FIMC)
	----------------------------------------------

	The S5P/Exynos SoC Camera subsystem comprises of multiple sub-devices
	represented by separate device tree nodes. Currently this includes: FIMC (in
	the S5P SoCs series known as CAMIF), MIPI CSIS, FIMC-LITE and FIMC-IS (ISP).

	The sub-subdevices are defined as child nodes of the common 'camera' node which
	also includes common properties of the whole subsystem not really specific to
	any single sub-device, like common camera port pins or the CAMCLK clock outputs
	for external image sensors attached to an SoC.

	Common 'camera' node
	--------------------

	Required properties:

	- compatible: must be "samsung,fimc", "simple-bus"
	- clocks: list of clock specifiers, corresponding to entries in
	the clock-names property;
	- clock-names : must contain "sclk_cam0", "sclk_cam1", "pxl_async0",
	"pxl_async1" entries, matching entries in the clocks property.

	- #clock-cells: from the common clock bindings (../clock/clock-bindings.txt),
	must be 1. A clock provider is associated with the 'camera' node and it should
	be referenced by external sensors that use clocks provided by the SoC on
	CAM_*_CLKOUT pins. The clock specifier cell stores an index of a clock.
	The indices are 0, 1 for CAM_A_CLKOUT, CAM_B_CLKOUT clocks respectively.

	- clock-output-names: from the common clock bindings, should contain names of
	clocks registered by the camera subsystem corresponding to CAM_A_CLKOUT,
	CAM_B_CLKOUT output clocks respectively.

	The pinctrl bindings defined in ../pinctrl/pinctrl-bindings.txt must be used
	to define a required pinctrl state named "default" and optional pinctrl states:
	"idle", "active-a", active-b". These optional states can be used to switch the
	camera port pinmux at runtime. The "idle" state should configure both the camera
	ports A and B into high impedance state, especially the CAMCLK clock output
	should be inactive. For the "active-a" state the camera port A must be activated
	and the port B deactivated and for the state "active-b" it should be the other
	way around.

	The 'camera' node must include at least one 'fimc' child node.


	'fimc' device nodes
	-------------------

	Required properties:

	- compatible: "samsung,s5pv210-fimc" for S5PV210, "samsung,exynos4210-fimc"
	for Exynos4210 and "samsung,exynos4212-fimc" for Exynos4x12 SoCs;
	- reg: physical base address and length of the registers set for the device;
	- interrupts: should contain FIMC interrupt;
	- clocks: list of clock specifiers, must contain an entry for each required
	entry in clock-names;
	- clock-names: must contain "fimc", "sclk_fimc" entries.
	- samsung,pix-limits: an array of maximum supported image sizes in pixels, for
	details refer to Table 2-1 in the S5PV210 SoC User Manual; The meaning of
	each cell is as follows:
	0 - scaler input horizontal size,
	1 - input horizontal size for the scaler bypassed,
	2 - REAL_WIDTH without input rotation,
	3 - REAL_HEIGHT with input rotation,
	- samsung,sysreg: a phandle to the SYSREG node.

	Each FIMC device should have an alias in the aliases node, in the form of
	fimc<n>, where <n> is an integer specifying the IP block instance.

	Optional properties:

	- clock-frequency: maximum FIMC local clock (LCLK) frequency;
	- samsung,min-pix-sizes: an array specyfing minimum image size in pixels at
	the FIMC input and output DMA, in the first and second cell respectively.
	Default value when this property is not present is <16 16>;
	- samsung,min-pix-alignment: minimum supported image height alignment (first
	cell) and the horizontal image offset (second cell). The values are in pixels
	and default to <2 1> when this property is not present;
	- samsung,mainscaler-ext: a boolean property indicating whether the FIMC IP
	supports extended image size and has CIEXTEN register;
	- samsung,rotators: a bitmask specifying whether this IP has the input and
	the output rotator. Bits 4 and 0 correspond to input and output rotator
	respectively. If a rotator is present its corresponding bit should be set.
	Default value when this property is not specified is 0x11.
	- samsung,cam-if: a bolean property indicating whether the IP block includes
	the camera input interface.
	- samsung,isp-wb: this property must be present if the IP block has the ISP
	writeback input.
	- samsung,lcd-wb: this property must be present if the IP block has the LCD
	writeback input.


	'parallel-ports' node
	---------------------

	This node should contain child 'port' nodes specifying active parallel video
	input ports. It includes camera A and camera B inputs. 'reg' property in the
	port nodes specifies data input - 0, 1 indicates input A, B respectively.

	Optional properties

	- samsung,camclk-out (deprecated) : specifies clock output for remote sensor,
	0 - CAM_A_CLKOUT, 1 - CAM_B_CLKOUT;

	Image sensor nodes
	------------------

	The sensor device nodes should be added to their control bus controller (e.g.
	I2C0) nodes and linked to a port node in the csis or the parallel-ports node,
	using the common video interfaces bindings, defined in video-interfaces.txt.

	Example:

	aliases {
	fimc0 = &fimc_0;
	};

	/* Parallel bus IF sensor */
	i2c_0: i2c@13860000 {
	s5k6aa: sensor@3c {
	compatible = "samsung,s5k6aafx";
	reg = <0x3c>;
	vddio-supply = <...>;

	clock-frequency = <24000000>;
	clocks = <&camera 1>;
	clock-names = "mclk";

	port {
	s5k6aa_ep: endpoint {
	remote-endpoint = <&fimc0_ep>;
	bus-width = <8>;
	hsync-active = <0>;
	vsync-active = <1>;
	pclk-sample = <1>;
	};
	};
	};

	/* MIPI CSI-2 bus IF sensor */
	s5c73m3: sensor@1a {
	compatible = "samsung,s5c73m3";
	reg = <0x1a>;
	vddio-supply = <...>;

	clock-frequency = <24000000>;
	clocks = <&camera 0>;
	clock-names = "mclk";

	port {
	s5c73m3_1: endpoint {
	data-lanes = <1 2 3 4>;
	remote-endpoint = <&csis0_ep>;
	};
	};
	};
	};

	camera {
	compatible = "samsung,fimc", "simple-bus";
	clocks = <&clock 132>, <&clock 133>, <&clock 351>,
	<&clock 352>;
	clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0",
	"pxl_async1";
	#clock-cells = <1>;
	clock-output-names = "cam_a_clkout", "cam_b_clkout";
	pinctrl-names = "default";
	pinctrl-0 = <&cam_port_a_clk_active>;
	#address-cells = <1>;
	#size-cells = <1>;

	/* parallel camera ports */
	parallel-ports {
	/* camera A input */
	port@0 {
	reg = <0>;
	fimc0_ep: endpoint {
	remote-endpoint = <&s5k6aa_ep>;
	bus-width = <8>;
	hsync-active = <0>;
	vsync-active = <1>;
	pclk-sample = <1>;
	};
	};
	};

	fimc_0: fimc@11800000 {
	compatible = "samsung,exynos4210-fimc";
	reg = <0x11800000 0x1000>;
	interrupts = <0 85 0>;
	};

	csis_0: csis@11880000 {
	compatible = "samsung,exynos4210-csis";
	reg = <0x11880000 0x1000>;
	interrupts = <0 78 0>;
	/* camera C input */
	port@3 {
	reg = <3>;
	csis0_ep: endpoint {
	remote-endpoint = <&s5c73m3_ep>;
	data-lanes = <1 2 3 4>;
	samsung,csis-hs-settle = <12>;
	};
	};
	};
	};

	The MIPI-CSIS device binding is defined in samsung-mipi-csis.txt.