| /* |
| * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights |
| * reserved. |
| * |
| * This software is available to you under a choice of one of two |
| * licenses. You may choose to be licensed under the terms of the GNU |
| * General Public License (GPL) Version 2, available from the file |
| * COPYING in the main directory of this source tree, or the NetLogic |
| * license below: |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in |
| * the documentation and/or other materials provided with the |
| * distribution. |
| * |
| * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR |
| * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED |
| * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE |
| * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR |
| * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, |
| * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE |
| * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN |
| * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/of_fdt.h> |
| |
| #include <asm/idle.h> |
| #include <asm/reboot.h> |
| #include <asm/time.h> |
| #include <asm/bootinfo.h> |
| |
| #include <asm/netlogic/haldefs.h> |
| #include <asm/netlogic/common.h> |
| |
| #include <asm/netlogic/xlp-hal/iomap.h> |
| #include <asm/netlogic/xlp-hal/xlp.h> |
| #include <asm/netlogic/xlp-hal/sys.h> |
| |
| uint64_t nlm_io_base; |
| struct nlm_soc_info nlm_nodes[NLM_NR_NODES]; |
| cpumask_t nlm_cpumask = CPU_MASK_CPU0; |
| unsigned int nlm_threads_per_core; |
| |
| static void nlm_linux_exit(void) |
| { |
| uint64_t sysbase = nlm_get_node(0)->sysbase; |
| |
| nlm_write_sys_reg(sysbase, SYS_CHIP_RESET, 1); |
| for ( ; ; ) |
| cpu_wait(); |
| } |
| |
| static void nlm_fixup_mem(void) |
| { |
| const int pref_backup = 512; |
| int i; |
| |
| for (i = 0; i < boot_mem_map.nr_map; i++) { |
| if (boot_mem_map.map[i].type != BOOT_MEM_RAM) |
| continue; |
| boot_mem_map.map[i].size -= pref_backup; |
| } |
| } |
| |
| static void __init xlp_init_mem_from_bars(void) |
| { |
| uint64_t map[16]; |
| int i, n; |
| |
| n = xlp_get_dram_map(-1, map); /* -1: info for all nodes */ |
| for (i = 0; i < n; i += 2) { |
| /* exclude 0x1000_0000-0x2000_0000, u-boot device */ |
| if (map[i] <= 0x10000000 && map[i+1] > 0x10000000) |
| map[i+1] = 0x10000000; |
| if (map[i] > 0x10000000 && map[i] < 0x20000000) |
| map[i] = 0x20000000; |
| |
| add_memory_region(map[i], map[i+1] - map[i], BOOT_MEM_RAM); |
| } |
| } |
| |
| void __init plat_mem_setup(void) |
| { |
| panic_timeout = 5; |
| _machine_restart = (void (*)(char *))nlm_linux_exit; |
| _machine_halt = nlm_linux_exit; |
| pm_power_off = nlm_linux_exit; |
| |
| /* memory and bootargs from DT */ |
| early_init_devtree(initial_boot_params); |
| |
| if (boot_mem_map.nr_map == 0) { |
| pr_info("Using DRAM BARs for memory map.\n"); |
| xlp_init_mem_from_bars(); |
| } |
| /* Calculate and setup wired entries for mapped kernel */ |
| nlm_fixup_mem(); |
| } |
| |
| const char *get_system_type(void) |
| { |
| switch (read_c0_prid() & 0xff00) { |
| case PRID_IMP_NETLOGIC_XLP2XX: |
| return "Broadcom XLPII Series"; |
| default: |
| return "Netlogic XLP Series"; |
| } |
| } |
| |
| void __init prom_free_prom_memory(void) |
| { |
| /* Nothing yet */ |
| } |
| |
| void xlp_mmu_init(void) |
| { |
| u32 conf4; |
| |
| if (cpu_is_xlpii()) { |
| /* XLPII series has extended pagesize in config 4 */ |
| conf4 = read_c0_config4() & ~0x1f00u; |
| write_c0_config4(conf4 | ((PAGE_SHIFT - 10) / 2 << 8)); |
| } else { |
| /* enable extended TLB and Large Fixed TLB */ |
| write_c0_config6(read_c0_config6() | 0x24); |
| |
| /* set page mask of extended Fixed TLB in config7 */ |
| write_c0_config7(PM_DEFAULT_MASK >> |
| (13 + (ffz(PM_DEFAULT_MASK >> 13) / 2))); |
| } |
| } |
| |
| void nlm_percpu_init(int hwcpuid) |
| { |
| } |
| |
| void __init prom_init(void) |
| { |
| void *reset_vec; |
| |
| nlm_io_base = CKSEG1ADDR(XLP_DEFAULT_IO_BASE); |
| nlm_init_boot_cpu(); |
| xlp_mmu_init(); |
| nlm_node_init(0); |
| xlp_dt_init((void *)(long)fw_arg0); |
| |
| /* Update reset entry point with CPU init code */ |
| reset_vec = (void *)CKSEG1ADDR(RESET_VEC_PHYS); |
| memset(reset_vec, 0, RESET_VEC_SIZE); |
| memcpy(reset_vec, (void *)nlm_reset_entry, |
| (nlm_reset_entry_end - nlm_reset_entry)); |
| |
| #ifdef CONFIG_SMP |
| cpumask_setall(&nlm_cpumask); |
| nlm_wakeup_secondary_cpus(); |
| |
| /* update TLB size after waking up threads */ |
| current_cpu_data.tlbsize = ((read_c0_config6() >> 16) & 0xffff) + 1; |
| |
| register_smp_ops(&nlm_smp_ops); |
| #endif |
| } |