| /* | |
| * storage_common.c -- Common definitions for mass storage functionality | |
| * | |
| * Copyright (C) 2003-2008 Alan Stern | |
| * Copyeight (C) 2009 Samsung Electronics | |
| * Author: Michal Nazarewicz (mina86@mina86.com) | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| */ | |
| /* | |
| * This file requires the following identifiers used in USB strings to | |
| * be defined (each of type pointer to char): | |
| * - fsg_string_interface -- name of the interface | |
| */ | |
| /* | |
| * When USB_GADGET_DEBUG_FILES is defined the module param num_buffers | |
| * sets the number of pipeline buffers (length of the fsg_buffhd array). | |
| * The valid range of num_buffers is: num >= 2 && num <= 4. | |
| */ | |
| #include <linux/usb/storage.h> | |
| #include <scsi/scsi.h> | |
| #include <asm/unaligned.h> | |
| /* | |
| * Thanks to NetChip Technologies for donating this product ID. | |
| * | |
| * DO NOT REUSE THESE IDs with any other driver!! Ever!! | |
| * Instead: allocate your own, using normal USB-IF procedures. | |
| */ | |
| #define FSG_VENDOR_ID 0x0525 /* NetChip */ | |
| #define FSG_PRODUCT_ID 0xa4a5 /* Linux-USB File-backed Storage Gadget */ | |
| /*-------------------------------------------------------------------------*/ | |
| #ifndef DEBUG | |
| #undef VERBOSE_DEBUG | |
| #undef DUMP_MSGS | |
| #endif /* !DEBUG */ | |
| #ifdef VERBOSE_DEBUG | |
| #define VLDBG LDBG | |
| #else | |
| #define VLDBG(lun, fmt, args...) do { } while (0) | |
| #endif /* VERBOSE_DEBUG */ | |
| #define LDBG(lun, fmt, args...) dev_dbg (&(lun)->dev, fmt, ## args) | |
| #define LERROR(lun, fmt, args...) dev_err (&(lun)->dev, fmt, ## args) | |
| #define LWARN(lun, fmt, args...) dev_warn(&(lun)->dev, fmt, ## args) | |
| #define LINFO(lun, fmt, args...) dev_info(&(lun)->dev, fmt, ## args) | |
| #ifdef DUMP_MSGS | |
| # define dump_msg(fsg, /* const char * */ label, \ | |
| /* const u8 * */ buf, /* unsigned */ length) do { \ | |
| if (length < 512) { \ | |
| DBG(fsg, "%s, length %u:\n", label, length); \ | |
| print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, \ | |
| 16, 1, buf, length, 0); \ | |
| } \ | |
| } while (0) | |
| # define dump_cdb(fsg) do { } while (0) | |
| #else | |
| # define dump_msg(fsg, /* const char * */ label, \ | |
| /* const u8 * */ buf, /* unsigned */ length) do { } while (0) | |
| # ifdef VERBOSE_DEBUG | |
| # define dump_cdb(fsg) \ | |
| print_hex_dump(KERN_DEBUG, "SCSI CDB: ", DUMP_PREFIX_NONE, \ | |
| 16, 1, (fsg)->cmnd, (fsg)->cmnd_size, 0) \ | |
| # else | |
| # define dump_cdb(fsg) do { } while (0) | |
| # endif /* VERBOSE_DEBUG */ | |
| #endif /* DUMP_MSGS */ | |
| /*-------------------------------------------------------------------------*/ | |
| /* Length of a SCSI Command Data Block */ | |
| #define MAX_COMMAND_SIZE 16 | |
| /* SCSI Sense Key/Additional Sense Code/ASC Qualifier values */ | |
| #define SS_NO_SENSE 0 | |
| #define SS_COMMUNICATION_FAILURE 0x040800 | |
| #define SS_INVALID_COMMAND 0x052000 | |
| #define SS_INVALID_FIELD_IN_CDB 0x052400 | |
| #define SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE 0x052100 | |
| #define SS_LOGICAL_UNIT_NOT_SUPPORTED 0x052500 | |
| #define SS_MEDIUM_NOT_PRESENT 0x023a00 | |
| #define SS_MEDIUM_REMOVAL_PREVENTED 0x055302 | |
| #define SS_NOT_READY_TO_READY_TRANSITION 0x062800 | |
| #define SS_RESET_OCCURRED 0x062900 | |
| #define SS_SAVING_PARAMETERS_NOT_SUPPORTED 0x053900 | |
| #define SS_UNRECOVERED_READ_ERROR 0x031100 | |
| #define SS_WRITE_ERROR 0x030c02 | |
| #define SS_WRITE_PROTECTED 0x072700 | |
| #define SK(x) ((u8) ((x) >> 16)) /* Sense Key byte, etc. */ | |
| #define ASC(x) ((u8) ((x) >> 8)) | |
| #define ASCQ(x) ((u8) (x)) | |
| /*-------------------------------------------------------------------------*/ | |
| struct fsg_lun { | |
| struct file *filp; | |
| loff_t file_length; | |
| loff_t num_sectors; | |
| unsigned int initially_ro:1; | |
| unsigned int ro:1; | |
| unsigned int removable:1; | |
| unsigned int cdrom:1; | |
| unsigned int prevent_medium_removal:1; | |
| unsigned int registered:1; | |
| unsigned int info_valid:1; | |
| unsigned int nofua:1; | |
| u32 sense_data; | |
| u32 sense_data_info; | |
| u32 unit_attention_data; | |
| unsigned int blkbits; /* Bits of logical block size of bound block device */ | |
| unsigned int blksize; /* logical block size of bound block device */ | |
| struct device dev; | |
| }; | |
| static inline bool fsg_lun_is_open(struct fsg_lun *curlun) | |
| { | |
| return curlun->filp != NULL; | |
| } | |
| static inline struct fsg_lun *fsg_lun_from_dev(struct device *dev) | |
| { | |
| return container_of(dev, struct fsg_lun, dev); | |
| } | |
| /* Big enough to hold our biggest descriptor */ | |
| #define EP0_BUFSIZE 256 | |
| #define DELAYED_STATUS (EP0_BUFSIZE + 999) /* An impossibly large value */ | |
| #ifdef CONFIG_USB_GADGET_DEBUG_FILES | |
| static unsigned int fsg_num_buffers = CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS; | |
| module_param_named(num_buffers, fsg_num_buffers, uint, S_IRUGO); | |
| MODULE_PARM_DESC(num_buffers, "Number of pipeline buffers"); | |
| #else | |
| /* | |
| * Number of buffers we will use. | |
| * 2 is usually enough for good buffering pipeline | |
| */ | |
| #define fsg_num_buffers CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS | |
| #endif /* CONFIG_USB_DEBUG */ | |
| /* check if fsg_num_buffers is within a valid range */ | |
| static inline int fsg_num_buffers_validate(void) | |
| { | |
| if (fsg_num_buffers >= 2 && fsg_num_buffers <= 4) | |
| return 0; | |
| pr_err("fsg_num_buffers %u is out of range (%d to %d)\n", | |
| fsg_num_buffers, 2 ,4); | |
| return -EINVAL; | |
| } | |
| /* Default size of buffer length. */ | |
| #define FSG_BUFLEN ((u32)16384) | |
| /* Maximal number of LUNs supported in mass storage function */ | |
| #define FSG_MAX_LUNS 8 | |
| enum fsg_buffer_state { | |
| BUF_STATE_EMPTY = 0, | |
| BUF_STATE_FULL, | |
| BUF_STATE_BUSY | |
| }; | |
| struct fsg_buffhd { | |
| void *buf; | |
| enum fsg_buffer_state state; | |
| struct fsg_buffhd *next; | |
| /* | |
| * The NetChip 2280 is faster, and handles some protocol faults | |
| * better, if we don't submit any short bulk-out read requests. | |
| * So we will record the intended request length here. | |
| */ | |
| unsigned int bulk_out_intended_length; | |
| struct usb_request *inreq; | |
| int inreq_busy; | |
| struct usb_request *outreq; | |
| int outreq_busy; | |
| }; | |
| enum fsg_state { | |
| /* This one isn't used anywhere */ | |
| FSG_STATE_COMMAND_PHASE = -10, | |
| FSG_STATE_DATA_PHASE, | |
| FSG_STATE_STATUS_PHASE, | |
| FSG_STATE_IDLE = 0, | |
| FSG_STATE_ABORT_BULK_OUT, | |
| FSG_STATE_RESET, | |
| FSG_STATE_INTERFACE_CHANGE, | |
| FSG_STATE_CONFIG_CHANGE, | |
| FSG_STATE_DISCONNECT, | |
| FSG_STATE_EXIT, | |
| FSG_STATE_TERMINATED | |
| }; | |
| enum data_direction { | |
| DATA_DIR_UNKNOWN = 0, | |
| DATA_DIR_FROM_HOST, | |
| DATA_DIR_TO_HOST, | |
| DATA_DIR_NONE | |
| }; | |
| /*-------------------------------------------------------------------------*/ | |
| static inline u32 get_unaligned_be24(u8 *buf) | |
| { | |
| return 0xffffff & (u32) get_unaligned_be32(buf - 1); | |
| } | |
| /*-------------------------------------------------------------------------*/ | |
| enum { | |
| FSG_STRING_INTERFACE | |
| }; | |
| /* There is only one interface. */ | |
| static struct usb_interface_descriptor | |
| fsg_intf_desc = { | |
| .bLength = sizeof fsg_intf_desc, | |
| .bDescriptorType = USB_DT_INTERFACE, | |
| .bNumEndpoints = 2, /* Adjusted during fsg_bind() */ | |
| .bInterfaceClass = USB_CLASS_MASS_STORAGE, | |
| .bInterfaceSubClass = USB_SC_SCSI, /* Adjusted during fsg_bind() */ | |
| .bInterfaceProtocol = USB_PR_BULK, /* Adjusted during fsg_bind() */ | |
| .iInterface = FSG_STRING_INTERFACE, | |
| }; | |
| /* | |
| * Three full-speed endpoint descriptors: bulk-in, bulk-out, and | |
| * interrupt-in. | |
| */ | |
| static struct usb_endpoint_descriptor | |
| fsg_fs_bulk_in_desc = { | |
| .bLength = USB_DT_ENDPOINT_SIZE, | |
| .bDescriptorType = USB_DT_ENDPOINT, | |
| .bEndpointAddress = USB_DIR_IN, | |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, | |
| /* wMaxPacketSize set by autoconfiguration */ | |
| }; | |
| static struct usb_endpoint_descriptor | |
| fsg_fs_bulk_out_desc = { | |
| .bLength = USB_DT_ENDPOINT_SIZE, | |
| .bDescriptorType = USB_DT_ENDPOINT, | |
| .bEndpointAddress = USB_DIR_OUT, | |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, | |
| /* wMaxPacketSize set by autoconfiguration */ | |
| }; | |
| static struct usb_descriptor_header *fsg_fs_function[] = { | |
| (struct usb_descriptor_header *) &fsg_intf_desc, | |
| (struct usb_descriptor_header *) &fsg_fs_bulk_in_desc, | |
| (struct usb_descriptor_header *) &fsg_fs_bulk_out_desc, | |
| NULL, | |
| }; | |
| /* | |
| * USB 2.0 devices need to expose both high speed and full speed | |
| * descriptors, unless they only run at full speed. | |
| * | |
| * That means alternate endpoint descriptors (bigger packets) | |
| * and a "device qualifier" ... plus more construction options | |
| * for the configuration descriptor. | |
| */ | |
| static struct usb_endpoint_descriptor | |
| fsg_hs_bulk_in_desc = { | |
| .bLength = USB_DT_ENDPOINT_SIZE, | |
| .bDescriptorType = USB_DT_ENDPOINT, | |
| /* bEndpointAddress copied from fs_bulk_in_desc during fsg_bind() */ | |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, | |
| .wMaxPacketSize = cpu_to_le16(512), | |
| }; | |
| static struct usb_endpoint_descriptor | |
| fsg_hs_bulk_out_desc = { | |
| .bLength = USB_DT_ENDPOINT_SIZE, | |
| .bDescriptorType = USB_DT_ENDPOINT, | |
| /* bEndpointAddress copied from fs_bulk_out_desc during fsg_bind() */ | |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, | |
| .wMaxPacketSize = cpu_to_le16(512), | |
| .bInterval = 1, /* NAK every 1 uframe */ | |
| }; | |
| static struct usb_descriptor_header *fsg_hs_function[] = { | |
| (struct usb_descriptor_header *) &fsg_intf_desc, | |
| (struct usb_descriptor_header *) &fsg_hs_bulk_in_desc, | |
| (struct usb_descriptor_header *) &fsg_hs_bulk_out_desc, | |
| NULL, | |
| }; | |
| static struct usb_endpoint_descriptor | |
| fsg_ss_bulk_in_desc = { | |
| .bLength = USB_DT_ENDPOINT_SIZE, | |
| .bDescriptorType = USB_DT_ENDPOINT, | |
| /* bEndpointAddress copied from fs_bulk_in_desc during fsg_bind() */ | |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, | |
| .wMaxPacketSize = cpu_to_le16(1024), | |
| }; | |
| static struct usb_ss_ep_comp_descriptor fsg_ss_bulk_in_comp_desc = { | |
| .bLength = sizeof(fsg_ss_bulk_in_comp_desc), | |
| .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, | |
| /*.bMaxBurst = DYNAMIC, */ | |
| }; | |
| static struct usb_endpoint_descriptor | |
| fsg_ss_bulk_out_desc = { | |
| .bLength = USB_DT_ENDPOINT_SIZE, | |
| .bDescriptorType = USB_DT_ENDPOINT, | |
| /* bEndpointAddress copied from fs_bulk_out_desc during fsg_bind() */ | |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, | |
| .wMaxPacketSize = cpu_to_le16(1024), | |
| }; | |
| static struct usb_ss_ep_comp_descriptor fsg_ss_bulk_out_comp_desc = { | |
| .bLength = sizeof(fsg_ss_bulk_in_comp_desc), | |
| .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, | |
| /*.bMaxBurst = DYNAMIC, */ | |
| }; | |
| static struct usb_descriptor_header *fsg_ss_function[] = { | |
| (struct usb_descriptor_header *) &fsg_intf_desc, | |
| (struct usb_descriptor_header *) &fsg_ss_bulk_in_desc, | |
| (struct usb_descriptor_header *) &fsg_ss_bulk_in_comp_desc, | |
| (struct usb_descriptor_header *) &fsg_ss_bulk_out_desc, | |
| (struct usb_descriptor_header *) &fsg_ss_bulk_out_comp_desc, | |
| NULL, | |
| }; | |
| /* Static strings, in UTF-8 (for simplicity we use only ASCII characters) */ | |
| static struct usb_string fsg_strings[] = { | |
| {FSG_STRING_INTERFACE, fsg_string_interface}, | |
| {} | |
| }; | |
| static struct usb_gadget_strings fsg_stringtab = { | |
| .language = 0x0409, /* en-us */ | |
| .strings = fsg_strings, | |
| }; | |
| /*-------------------------------------------------------------------------*/ | |
| /* | |
| * If the next two routines are called while the gadget is registered, | |
| * the caller must own fsg->filesem for writing. | |
| */ | |
| static void fsg_lun_close(struct fsg_lun *curlun) | |
| { | |
| if (curlun->filp) { | |
| LDBG(curlun, "close backing file\n"); | |
| fput(curlun->filp); | |
| curlun->filp = NULL; | |
| } | |
| } | |
| static int fsg_lun_open(struct fsg_lun *curlun, const char *filename) | |
| { | |
| int ro; | |
| struct file *filp = NULL; | |
| int rc = -EINVAL; | |
| struct inode *inode = NULL; | |
| loff_t size; | |
| loff_t num_sectors; | |
| loff_t min_sectors; | |
| unsigned int blkbits; | |
| unsigned int blksize; | |
| /* R/W if we can, R/O if we must */ | |
| ro = curlun->initially_ro; | |
| if (!ro) { | |
| filp = filp_open(filename, O_RDWR | O_LARGEFILE, 0); | |
| if (PTR_ERR(filp) == -EROFS || PTR_ERR(filp) == -EACCES) | |
| ro = 1; | |
| } | |
| if (ro) | |
| filp = filp_open(filename, O_RDONLY | O_LARGEFILE, 0); | |
| if (IS_ERR(filp)) { | |
| LINFO(curlun, "unable to open backing file: %s\n", filename); | |
| return PTR_ERR(filp); | |
| } | |
| if (!(filp->f_mode & FMODE_WRITE)) | |
| ro = 1; | |
| inode = file_inode(filp); | |
| if ((!S_ISREG(inode->i_mode) && !S_ISBLK(inode->i_mode))) { | |
| LINFO(curlun, "invalid file type: %s\n", filename); | |
| goto out; | |
| } | |
| /* | |
| * If we can't read the file, it's no good. | |
| * If we can't write the file, use it read-only. | |
| */ | |
| if (!(filp->f_op->read || filp->f_op->aio_read)) { | |
| LINFO(curlun, "file not readable: %s\n", filename); | |
| goto out; | |
| } | |
| if (!(filp->f_op->write || filp->f_op->aio_write)) | |
| ro = 1; | |
| size = i_size_read(inode->i_mapping->host); | |
| if (size < 0) { | |
| LINFO(curlun, "unable to find file size: %s\n", filename); | |
| rc = (int) size; | |
| goto out; | |
| } | |
| if (curlun->cdrom) { | |
| blksize = 2048; | |
| blkbits = 11; | |
| } else if (inode->i_bdev) { | |
| blksize = bdev_logical_block_size(inode->i_bdev); | |
| blkbits = blksize_bits(blksize); | |
| } else { | |
| blksize = 512; | |
| blkbits = 9; | |
| } | |
| num_sectors = size >> blkbits; /* File size in logic-block-size blocks */ | |
| min_sectors = 1; | |
| if (curlun->cdrom) { | |
| min_sectors = 300; /* Smallest track is 300 frames */ | |
| if (num_sectors >= 256*60*75) { | |
| num_sectors = 256*60*75 - 1; | |
| LINFO(curlun, "file too big: %s\n", filename); | |
| LINFO(curlun, "using only first %d blocks\n", | |
| (int) num_sectors); | |
| } | |
| } | |
| if (num_sectors < min_sectors) { | |
| LINFO(curlun, "file too small: %s\n", filename); | |
| rc = -ETOOSMALL; | |
| goto out; | |
| } | |
| if (fsg_lun_is_open(curlun)) | |
| fsg_lun_close(curlun); | |
| curlun->blksize = blksize; | |
| curlun->blkbits = blkbits; | |
| curlun->ro = ro; | |
| curlun->filp = filp; | |
| curlun->file_length = size; | |
| curlun->num_sectors = num_sectors; | |
| LDBG(curlun, "open backing file: %s\n", filename); | |
| return 0; | |
| out: | |
| fput(filp); | |
| return rc; | |
| } | |
| /*-------------------------------------------------------------------------*/ | |
| /* | |
| * Sync the file data, don't bother with the metadata. | |
| * This code was copied from fs/buffer.c:sys_fdatasync(). | |
| */ | |
| static int fsg_lun_fsync_sub(struct fsg_lun *curlun) | |
| { | |
| struct file *filp = curlun->filp; | |
| if (curlun->ro || !filp) | |
| return 0; | |
| return vfs_fsync(filp, 1); | |
| } | |
| static void store_cdrom_address(u8 *dest, int msf, u32 addr) | |
| { | |
| if (msf) { | |
| /* Convert to Minutes-Seconds-Frames */ | |
| addr >>= 2; /* Convert to 2048-byte frames */ | |
| addr += 2*75; /* Lead-in occupies 2 seconds */ | |
| dest[3] = addr % 75; /* Frames */ | |
| addr /= 75; | |
| dest[2] = addr % 60; /* Seconds */ | |
| addr /= 60; | |
| dest[1] = addr; /* Minutes */ | |
| dest[0] = 0; /* Reserved */ | |
| } else { | |
| /* Absolute sector */ | |
| put_unaligned_be32(addr, dest); | |
| } | |
| } | |
| /*-------------------------------------------------------------------------*/ | |
| static ssize_t fsg_show_ro(struct device *dev, struct device_attribute *attr, | |
| char *buf) | |
| { | |
| struct fsg_lun *curlun = fsg_lun_from_dev(dev); | |
| return sprintf(buf, "%d\n", fsg_lun_is_open(curlun) | |
| ? curlun->ro | |
| : curlun->initially_ro); | |
| } | |
| static ssize_t fsg_show_nofua(struct device *dev, struct device_attribute *attr, | |
| char *buf) | |
| { | |
| struct fsg_lun *curlun = fsg_lun_from_dev(dev); | |
| return sprintf(buf, "%u\n", curlun->nofua); | |
| } | |
| static ssize_t fsg_show_file(struct device *dev, struct device_attribute *attr, | |
| char *buf) | |
| { | |
| struct fsg_lun *curlun = fsg_lun_from_dev(dev); | |
| struct rw_semaphore *filesem = dev_get_drvdata(dev); | |
| char *p; | |
| ssize_t rc; | |
| down_read(filesem); | |
| if (fsg_lun_is_open(curlun)) { /* Get the complete pathname */ | |
| p = d_path(&curlun->filp->f_path, buf, PAGE_SIZE - 1); | |
| if (IS_ERR(p)) | |
| rc = PTR_ERR(p); | |
| else { | |
| rc = strlen(p); | |
| memmove(buf, p, rc); | |
| buf[rc] = '\n'; /* Add a newline */ | |
| buf[++rc] = 0; | |
| } | |
| } else { /* No file, return 0 bytes */ | |
| *buf = 0; | |
| rc = 0; | |
| } | |
| up_read(filesem); | |
| return rc; | |
| } | |
| static ssize_t fsg_store_ro(struct device *dev, struct device_attribute *attr, | |
| const char *buf, size_t count) | |
| { | |
| ssize_t rc; | |
| struct fsg_lun *curlun = fsg_lun_from_dev(dev); | |
| struct rw_semaphore *filesem = dev_get_drvdata(dev); | |
| unsigned ro; | |
| rc = kstrtouint(buf, 2, &ro); | |
| if (rc) | |
| return rc; | |
| /* | |
| * Allow the write-enable status to change only while the | |
| * backing file is closed. | |
| */ | |
| down_read(filesem); | |
| if (fsg_lun_is_open(curlun)) { | |
| LDBG(curlun, "read-only status change prevented\n"); | |
| rc = -EBUSY; | |
| } else { | |
| curlun->ro = ro; | |
| curlun->initially_ro = ro; | |
| LDBG(curlun, "read-only status set to %d\n", curlun->ro); | |
| rc = count; | |
| } | |
| up_read(filesem); | |
| return rc; | |
| } | |
| static ssize_t fsg_store_nofua(struct device *dev, | |
| struct device_attribute *attr, | |
| const char *buf, size_t count) | |
| { | |
| struct fsg_lun *curlun = fsg_lun_from_dev(dev); | |
| unsigned nofua; | |
| int ret; | |
| ret = kstrtouint(buf, 2, &nofua); | |
| if (ret) | |
| return ret; | |
| /* Sync data when switching from async mode to sync */ | |
| if (!nofua && curlun->nofua) | |
| fsg_lun_fsync_sub(curlun); | |
| curlun->nofua = nofua; | |
| return count; | |
| } | |
| static ssize_t fsg_store_file(struct device *dev, struct device_attribute *attr, | |
| const char *buf, size_t count) | |
| { | |
| struct fsg_lun *curlun = fsg_lun_from_dev(dev); | |
| struct rw_semaphore *filesem = dev_get_drvdata(dev); | |
| int rc = 0; | |
| if (curlun->prevent_medium_removal && fsg_lun_is_open(curlun)) { | |
| LDBG(curlun, "eject attempt prevented\n"); | |
| return -EBUSY; /* "Door is locked" */ | |
| } | |
| /* Remove a trailing newline */ | |
| if (count > 0 && buf[count-1] == '\n') | |
| ((char *) buf)[count-1] = 0; /* Ugh! */ | |
| /* Load new medium */ | |
| down_write(filesem); | |
| if (count > 0 && buf[0]) { | |
| /* fsg_lun_open() will close existing file if any. */ | |
| rc = fsg_lun_open(curlun, buf); | |
| if (rc == 0) | |
| curlun->unit_attention_data = | |
| SS_NOT_READY_TO_READY_TRANSITION; | |
| } else if (fsg_lun_is_open(curlun)) { | |
| fsg_lun_close(curlun); | |
| curlun->unit_attention_data = SS_MEDIUM_NOT_PRESENT; | |
| } | |
| up_write(filesem); | |
| return (rc < 0 ? rc : count); | |
| } |