| /* | |
| * Line6 Linux USB driver - 0.9.1beta | |
| * | |
| * Copyright (C) 2004-2010 Markus Grabner (grabner@icg.tugraz.at) | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License as | |
| * published by the Free Software Foundation, version 2. | |
| * | |
| */ | |
| #include <linux/slab.h> | |
| #include <sound/core.h> | |
| #include <sound/pcm.h> | |
| #include <sound/pcm_params.h> | |
| #include "audio.h" | |
| #include "capture.h" | |
| #include "driver.h" | |
| #include "pcm.h" | |
| #include "pod.h" | |
| #include "playback.h" | |
| /* | |
| Software stereo volume control. | |
| */ | |
| static void change_volume(struct urb *urb_out, int volume[], | |
| int bytes_per_frame) | |
| { | |
| int chn = 0; | |
| if (volume[0] == 256 && volume[1] == 256) | |
| return; /* maximum volume - no change */ | |
| if (bytes_per_frame == 4) { | |
| short *p, *buf_end; | |
| p = (short *)urb_out->transfer_buffer; | |
| buf_end = p + urb_out->transfer_buffer_length / sizeof(*p); | |
| for (; p < buf_end; ++p) { | |
| *p = (*p * volume[chn & 1]) >> 8; | |
| ++chn; | |
| } | |
| } else if (bytes_per_frame == 6) { | |
| unsigned char *p, *buf_end; | |
| p = (unsigned char *)urb_out->transfer_buffer; | |
| buf_end = p + urb_out->transfer_buffer_length; | |
| for (; p < buf_end; p += 3) { | |
| int val; | |
| val = p[0] + (p[1] << 8) + ((signed char)p[2] << 16); | |
| val = (val * volume[chn & 1]) >> 8; | |
| p[0] = val; | |
| p[1] = val >> 8; | |
| p[2] = val >> 16; | |
| ++chn; | |
| } | |
| } | |
| } | |
| #ifdef CONFIG_LINE6_USB_IMPULSE_RESPONSE | |
| /* | |
| Create signal for impulse response test. | |
| */ | |
| static void create_impulse_test_signal(struct snd_line6_pcm *line6pcm, | |
| struct urb *urb_out, int bytes_per_frame) | |
| { | |
| int frames = urb_out->transfer_buffer_length / bytes_per_frame; | |
| if (bytes_per_frame == 4) { | |
| int i; | |
| short *pi = (short *)line6pcm->prev_fbuf; | |
| short *po = (short *)urb_out->transfer_buffer; | |
| for (i = 0; i < frames; ++i) { | |
| po[0] = pi[0]; | |
| po[1] = 0; | |
| pi += 2; | |
| po += 2; | |
| } | |
| } else if (bytes_per_frame == 6) { | |
| int i, j; | |
| unsigned char *pi = line6pcm->prev_fbuf; | |
| unsigned char *po = urb_out->transfer_buffer; | |
| for (i = 0; i < frames; ++i) { | |
| for (j = 0; j < bytes_per_frame / 2; ++j) | |
| po[j] = pi[j]; | |
| for (; j < bytes_per_frame; ++j) | |
| po[j] = 0; | |
| pi += bytes_per_frame; | |
| po += bytes_per_frame; | |
| } | |
| } | |
| if (--line6pcm->impulse_count <= 0) { | |
| ((unsigned char *)(urb_out->transfer_buffer))[bytes_per_frame - | |
| 1] = | |
| line6pcm->impulse_volume; | |
| line6pcm->impulse_count = line6pcm->impulse_period; | |
| } | |
| } | |
| #endif | |
| /* | |
| Add signal to buffer for software monitoring. | |
| */ | |
| static void add_monitor_signal(struct urb *urb_out, unsigned char *signal, | |
| int volume, int bytes_per_frame) | |
| { | |
| if (volume == 0) | |
| return; /* zero volume - no change */ | |
| if (bytes_per_frame == 4) { | |
| short *pi, *po, *buf_end; | |
| pi = (short *)signal; | |
| po = (short *)urb_out->transfer_buffer; | |
| buf_end = po + urb_out->transfer_buffer_length / sizeof(*po); | |
| for (; po < buf_end; ++pi, ++po) | |
| *po += (*pi * volume) >> 8; | |
| } | |
| /* | |
| We don't need to handle devices with 6 bytes per frame here | |
| since they all support hardware monitoring. | |
| */ | |
| } | |
| /* | |
| Find a free URB, prepare audio data, and submit URB. | |
| */ | |
| static int submit_audio_out_urb(struct snd_line6_pcm *line6pcm) | |
| { | |
| int index; | |
| unsigned long flags; | |
| int i, urb_size, urb_frames; | |
| int ret; | |
| const int bytes_per_frame = line6pcm->properties->bytes_per_frame; | |
| const int frame_increment = | |
| line6pcm->properties->snd_line6_rates.rats[0].num_min; | |
| const int frame_factor = | |
| line6pcm->properties->snd_line6_rates.rats[0].den * | |
| (USB_INTERVALS_PER_SECOND / LINE6_ISO_INTERVAL); | |
| struct urb *urb_out; | |
| spin_lock_irqsave(&line6pcm->lock_audio_out, flags); | |
| index = | |
| find_first_zero_bit(&line6pcm->active_urb_out, LINE6_ISO_BUFFERS); | |
| if (index < 0 || index >= LINE6_ISO_BUFFERS) { | |
| spin_unlock_irqrestore(&line6pcm->lock_audio_out, flags); | |
| dev_err(line6pcm->line6->ifcdev, "no free URB found\n"); | |
| return -EINVAL; | |
| } | |
| urb_out = line6pcm->urb_audio_out[index]; | |
| urb_size = 0; | |
| for (i = 0; i < LINE6_ISO_PACKETS; ++i) { | |
| /* compute frame size for given sampling rate */ | |
| int fsize = 0; | |
| struct usb_iso_packet_descriptor *fout = | |
| &urb_out->iso_frame_desc[i]; | |
| if (line6pcm->flags & LINE6_BITS_CAPTURE_STREAM) | |
| fsize = line6pcm->prev_fsize; | |
| if (fsize == 0) { | |
| int n; | |
| line6pcm->count_out += frame_increment; | |
| n = line6pcm->count_out / frame_factor; | |
| line6pcm->count_out -= n * frame_factor; | |
| fsize = n * bytes_per_frame; | |
| } | |
| fout->offset = urb_size; | |
| fout->length = fsize; | |
| urb_size += fsize; | |
| } | |
| if (urb_size == 0) { | |
| /* can't determine URB size */ | |
| spin_unlock_irqrestore(&line6pcm->lock_audio_out, flags); | |
| dev_err(line6pcm->line6->ifcdev, "driver bug: urb_size = 0\n"); | |
| return -EINVAL; | |
| } | |
| urb_frames = urb_size / bytes_per_frame; | |
| urb_out->transfer_buffer = | |
| line6pcm->buffer_out + | |
| index * LINE6_ISO_PACKETS * line6pcm->max_packet_size; | |
| urb_out->transfer_buffer_length = urb_size; | |
| urb_out->context = line6pcm; | |
| if (test_bit(LINE6_INDEX_PCM_ALSA_PLAYBACK_STREAM, &line6pcm->flags) && | |
| !test_bit(LINE6_INDEX_PAUSE_PLAYBACK, &line6pcm->flags)) { | |
| struct snd_pcm_runtime *runtime = | |
| get_substream(line6pcm, SNDRV_PCM_STREAM_PLAYBACK)->runtime; | |
| if (line6pcm->pos_out + urb_frames > runtime->buffer_size) { | |
| /* | |
| The transferred area goes over buffer boundary, | |
| copy the data to the temp buffer. | |
| */ | |
| int len; | |
| len = runtime->buffer_size - line6pcm->pos_out; | |
| if (len > 0) { | |
| memcpy(urb_out->transfer_buffer, | |
| runtime->dma_area + | |
| line6pcm->pos_out * bytes_per_frame, | |
| len * bytes_per_frame); | |
| memcpy(urb_out->transfer_buffer + | |
| len * bytes_per_frame, runtime->dma_area, | |
| (urb_frames - len) * bytes_per_frame); | |
| } else | |
| dev_err(line6pcm->line6->ifcdev, "driver bug: len = %d\n", | |
| len); | |
| } else { | |
| memcpy(urb_out->transfer_buffer, | |
| runtime->dma_area + | |
| line6pcm->pos_out * bytes_per_frame, | |
| urb_out->transfer_buffer_length); | |
| } | |
| line6pcm->pos_out += urb_frames; | |
| if (line6pcm->pos_out >= runtime->buffer_size) | |
| line6pcm->pos_out -= runtime->buffer_size; | |
| } else { | |
| memset(urb_out->transfer_buffer, 0, | |
| urb_out->transfer_buffer_length); | |
| } | |
| change_volume(urb_out, line6pcm->volume_playback, bytes_per_frame); | |
| if (line6pcm->prev_fbuf != NULL) { | |
| #ifdef CONFIG_LINE6_USB_IMPULSE_RESPONSE | |
| if (line6pcm->flags & LINE6_BITS_PCM_IMPULSE) { | |
| create_impulse_test_signal(line6pcm, urb_out, | |
| bytes_per_frame); | |
| if (line6pcm->flags & LINE6_BIT_PCM_ALSA_CAPTURE_STREAM) { | |
| line6_capture_copy(line6pcm, | |
| urb_out->transfer_buffer, | |
| urb_out-> | |
| transfer_buffer_length); | |
| line6_capture_check_period(line6pcm, | |
| urb_out->transfer_buffer_length); | |
| } | |
| } else { | |
| #endif | |
| if (! | |
| (line6pcm->line6-> | |
| properties->capabilities & LINE6_BIT_HWMON) | |
| && (line6pcm->flags & LINE6_BITS_PLAYBACK_STREAM) | |
| && (line6pcm->flags & LINE6_BITS_CAPTURE_STREAM)) | |
| add_monitor_signal(urb_out, line6pcm->prev_fbuf, | |
| line6pcm->volume_monitor, | |
| bytes_per_frame); | |
| #ifdef CONFIG_LINE6_USB_IMPULSE_RESPONSE | |
| } | |
| #endif | |
| } | |
| ret = usb_submit_urb(urb_out, GFP_ATOMIC); | |
| if (ret == 0) | |
| set_bit(index, &line6pcm->active_urb_out); | |
| else | |
| dev_err(line6pcm->line6->ifcdev, | |
| "URB out #%d submission failed (%d)\n", index, ret); | |
| spin_unlock_irqrestore(&line6pcm->lock_audio_out, flags); | |
| return 0; | |
| } | |
| /* | |
| Submit all currently available playback URBs. | |
| */ | |
| int line6_submit_audio_out_all_urbs(struct snd_line6_pcm *line6pcm) | |
| { | |
| int ret, i; | |
| for (i = 0; i < LINE6_ISO_BUFFERS; ++i) { | |
| ret = submit_audio_out_urb(line6pcm); | |
| if (ret < 0) | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| /* | |
| Unlink all currently active playback URBs. | |
| */ | |
| void line6_unlink_audio_out_urbs(struct snd_line6_pcm *line6pcm) | |
| { | |
| unsigned int i; | |
| for (i = LINE6_ISO_BUFFERS; i--;) { | |
| if (test_bit(i, &line6pcm->active_urb_out)) { | |
| if (!test_and_set_bit(i, &line6pcm->unlink_urb_out)) { | |
| struct urb *u = line6pcm->urb_audio_out[i]; | |
| usb_unlink_urb(u); | |
| } | |
| } | |
| } | |
| } | |
| /* | |
| Wait until unlinking of all currently active playback URBs has been | |
| finished. | |
| */ | |
| void line6_wait_clear_audio_out_urbs(struct snd_line6_pcm *line6pcm) | |
| { | |
| int timeout = HZ; | |
| unsigned int i; | |
| int alive; | |
| do { | |
| alive = 0; | |
| for (i = LINE6_ISO_BUFFERS; i--;) { | |
| if (test_bit(i, &line6pcm->active_urb_out)) | |
| alive++; | |
| } | |
| if (!alive) | |
| break; | |
| set_current_state(TASK_UNINTERRUPTIBLE); | |
| schedule_timeout(1); | |
| } while (--timeout > 0); | |
| if (alive) | |
| snd_printk(KERN_ERR "timeout: still %d active urbs..\n", alive); | |
| } | |
| /* | |
| Unlink all currently active playback URBs, and wait for finishing. | |
| */ | |
| void line6_unlink_wait_clear_audio_out_urbs(struct snd_line6_pcm *line6pcm) | |
| { | |
| line6_unlink_audio_out_urbs(line6pcm); | |
| line6_wait_clear_audio_out_urbs(line6pcm); | |
| } | |
| void line6_free_playback_buffer(struct snd_line6_pcm *line6pcm) | |
| { | |
| kfree(line6pcm->buffer_out); | |
| line6pcm->buffer_out = NULL; | |
| } | |
| /* | |
| Callback for completed playback URB. | |
| */ | |
| static void audio_out_callback(struct urb *urb) | |
| { | |
| int i, index, length = 0, shutdown = 0; | |
| unsigned long flags; | |
| struct snd_line6_pcm *line6pcm = (struct snd_line6_pcm *)urb->context; | |
| struct snd_pcm_substream *substream = | |
| get_substream(line6pcm, SNDRV_PCM_STREAM_PLAYBACK); | |
| #if USE_CLEAR_BUFFER_WORKAROUND | |
| memset(urb->transfer_buffer, 0, urb->transfer_buffer_length); | |
| #endif | |
| line6pcm->last_frame_out = urb->start_frame; | |
| /* find index of URB */ | |
| for (index = LINE6_ISO_BUFFERS; index--;) | |
| if (urb == line6pcm->urb_audio_out[index]) | |
| break; | |
| if (index < 0) | |
| return; /* URB has been unlinked asynchronously */ | |
| for (i = LINE6_ISO_PACKETS; i--;) | |
| length += urb->iso_frame_desc[i].length; | |
| spin_lock_irqsave(&line6pcm->lock_audio_out, flags); | |
| if (test_bit(LINE6_INDEX_PCM_ALSA_PLAYBACK_STREAM, &line6pcm->flags)) { | |
| struct snd_pcm_runtime *runtime = substream->runtime; | |
| line6pcm->pos_out_done += | |
| length / line6pcm->properties->bytes_per_frame; | |
| if (line6pcm->pos_out_done >= runtime->buffer_size) | |
| line6pcm->pos_out_done -= runtime->buffer_size; | |
| } | |
| clear_bit(index, &line6pcm->active_urb_out); | |
| for (i = LINE6_ISO_PACKETS; i--;) | |
| if (urb->iso_frame_desc[i].status == -EXDEV) { | |
| shutdown = 1; | |
| break; | |
| } | |
| if (test_and_clear_bit(index, &line6pcm->unlink_urb_out)) | |
| shutdown = 1; | |
| spin_unlock_irqrestore(&line6pcm->lock_audio_out, flags); | |
| if (!shutdown) { | |
| submit_audio_out_urb(line6pcm); | |
| if (test_bit(LINE6_INDEX_PCM_ALSA_PLAYBACK_STREAM, | |
| &line6pcm->flags)) { | |
| line6pcm->bytes_out += length; | |
| if (line6pcm->bytes_out >= line6pcm->period_out) { | |
| line6pcm->bytes_out %= line6pcm->period_out; | |
| snd_pcm_period_elapsed(substream); | |
| } | |
| } | |
| } | |
| } | |
| /* open playback callback */ | |
| static int snd_line6_playback_open(struct snd_pcm_substream *substream) | |
| { | |
| int err; | |
| struct snd_pcm_runtime *runtime = substream->runtime; | |
| struct snd_line6_pcm *line6pcm = snd_pcm_substream_chip(substream); | |
| err = snd_pcm_hw_constraint_ratdens(runtime, 0, SNDRV_PCM_HW_PARAM_RATE, | |
| (&line6pcm-> | |
| properties->snd_line6_rates)); | |
| if (err < 0) | |
| return err; | |
| runtime->hw = line6pcm->properties->snd_line6_playback_hw; | |
| return 0; | |
| } | |
| /* close playback callback */ | |
| static int snd_line6_playback_close(struct snd_pcm_substream *substream) | |
| { | |
| return 0; | |
| } | |
| /* hw_params playback callback */ | |
| static int snd_line6_playback_hw_params(struct snd_pcm_substream *substream, | |
| struct snd_pcm_hw_params *hw_params) | |
| { | |
| int ret; | |
| struct snd_line6_pcm *line6pcm = snd_pcm_substream_chip(substream); | |
| /* -- Florian Demski [FD] */ | |
| /* don't ask me why, but this fixes the bug on my machine */ | |
| if (line6pcm == NULL) { | |
| if (substream->pcm == NULL) | |
| return -ENOMEM; | |
| if (substream->pcm->private_data == NULL) | |
| return -ENOMEM; | |
| substream->private_data = substream->pcm->private_data; | |
| line6pcm = snd_pcm_substream_chip(substream); | |
| } | |
| /* -- [FD] end */ | |
| ret = line6_pcm_acquire(line6pcm, LINE6_BIT_PCM_ALSA_PLAYBACK_BUFFER); | |
| if (ret < 0) | |
| return ret; | |
| ret = snd_pcm_lib_malloc_pages(substream, | |
| params_buffer_bytes(hw_params)); | |
| if (ret < 0) { | |
| line6_pcm_release(line6pcm, LINE6_BIT_PCM_ALSA_PLAYBACK_BUFFER); | |
| return ret; | |
| } | |
| line6pcm->period_out = params_period_bytes(hw_params); | |
| return 0; | |
| } | |
| /* hw_free playback callback */ | |
| static int snd_line6_playback_hw_free(struct snd_pcm_substream *substream) | |
| { | |
| struct snd_line6_pcm *line6pcm = snd_pcm_substream_chip(substream); | |
| line6_pcm_release(line6pcm, LINE6_BIT_PCM_ALSA_PLAYBACK_BUFFER); | |
| return snd_pcm_lib_free_pages(substream); | |
| } | |
| /* trigger playback callback */ | |
| int snd_line6_playback_trigger(struct snd_line6_pcm *line6pcm, int cmd) | |
| { | |
| int err; | |
| switch (cmd) { | |
| case SNDRV_PCM_TRIGGER_START: | |
| #ifdef CONFIG_PM | |
| case SNDRV_PCM_TRIGGER_RESUME: | |
| #endif | |
| err = line6_pcm_acquire(line6pcm, | |
| LINE6_BIT_PCM_ALSA_PLAYBACK_STREAM); | |
| if (err < 0) | |
| return err; | |
| break; | |
| case SNDRV_PCM_TRIGGER_STOP: | |
| #ifdef CONFIG_PM | |
| case SNDRV_PCM_TRIGGER_SUSPEND: | |
| #endif | |
| err = line6_pcm_release(line6pcm, | |
| LINE6_BIT_PCM_ALSA_PLAYBACK_STREAM); | |
| if (err < 0) | |
| return err; | |
| break; | |
| case SNDRV_PCM_TRIGGER_PAUSE_PUSH: | |
| set_bit(LINE6_INDEX_PAUSE_PLAYBACK, &line6pcm->flags); | |
| break; | |
| case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: | |
| clear_bit(LINE6_INDEX_PAUSE_PLAYBACK, &line6pcm->flags); | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| /* playback pointer callback */ | |
| static snd_pcm_uframes_t | |
| snd_line6_playback_pointer(struct snd_pcm_substream *substream) | |
| { | |
| struct snd_line6_pcm *line6pcm = snd_pcm_substream_chip(substream); | |
| return line6pcm->pos_out_done; | |
| } | |
| /* playback operators */ | |
| struct snd_pcm_ops snd_line6_playback_ops = { | |
| .open = snd_line6_playback_open, | |
| .close = snd_line6_playback_close, | |
| .ioctl = snd_pcm_lib_ioctl, | |
| .hw_params = snd_line6_playback_hw_params, | |
| .hw_free = snd_line6_playback_hw_free, | |
| .prepare = snd_line6_prepare, | |
| .trigger = snd_line6_trigger, | |
| .pointer = snd_line6_playback_pointer, | |
| }; | |
| int line6_create_audio_out_urbs(struct snd_line6_pcm *line6pcm) | |
| { | |
| int i; | |
| /* create audio URBs and fill in constant values: */ | |
| for (i = 0; i < LINE6_ISO_BUFFERS; ++i) { | |
| struct urb *urb; | |
| /* URB for audio out: */ | |
| urb = line6pcm->urb_audio_out[i] = | |
| usb_alloc_urb(LINE6_ISO_PACKETS, GFP_KERNEL); | |
| if (urb == NULL) { | |
| dev_err(line6pcm->line6->ifcdev, "Out of memory\n"); | |
| return -ENOMEM; | |
| } | |
| urb->dev = line6pcm->line6->usbdev; | |
| urb->pipe = | |
| usb_sndisocpipe(line6pcm->line6->usbdev, | |
| line6pcm->ep_audio_write & | |
| USB_ENDPOINT_NUMBER_MASK); | |
| urb->transfer_flags = URB_ISO_ASAP; | |
| urb->start_frame = -1; | |
| urb->number_of_packets = LINE6_ISO_PACKETS; | |
| urb->interval = LINE6_ISO_INTERVAL; | |
| urb->error_count = 0; | |
| urb->complete = audio_out_callback; | |
| } | |
| return 0; | |
| } |