| /* | |
| * | |
| * Intel Management Engine Interface (Intel MEI) Linux driver | |
| * Copyright (c) 2003-2012, Intel Corporation. | |
| * | |
| * This program is free software; you can redistribute it and/or modify it | |
| * under the terms and conditions of the GNU General Public License, | |
| * version 2, as published by the Free Software Foundation. | |
| * | |
| * This program is distributed in the hope it will be useful, but WITHOUT | |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for | |
| * more details. | |
| * | |
| */ | |
| #include <linux/pci.h> | |
| #include <linux/kthread.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/fs.h> | |
| #include <linux/jiffies.h> | |
| #include <linux/mei.h> | |
| #include "mei_dev.h" | |
| #include "hbm.h" | |
| #include "hw-me.h" | |
| #include "client.h" | |
| /** | |
| * mei_complete_handler - processes completed operation. | |
| * | |
| * @cl: private data of the file object. | |
| * @cb_pos: callback block. | |
| */ | |
| void mei_irq_complete_handler(struct mei_cl *cl, struct mei_cl_cb *cb_pos) | |
| { | |
| if (cb_pos->fop_type == MEI_FOP_WRITE) { | |
| mei_io_cb_free(cb_pos); | |
| cb_pos = NULL; | |
| cl->writing_state = MEI_WRITE_COMPLETE; | |
| if (waitqueue_active(&cl->tx_wait)) | |
| wake_up_interruptible(&cl->tx_wait); | |
| } else if (cb_pos->fop_type == MEI_FOP_READ && | |
| MEI_READING == cl->reading_state) { | |
| cl->reading_state = MEI_READ_COMPLETE; | |
| if (waitqueue_active(&cl->rx_wait)) | |
| wake_up_interruptible(&cl->rx_wait); | |
| } | |
| } | |
| /** | |
| * _mei_irq_thread_state_ok - checks if mei header matches file private data | |
| * | |
| * @cl: private data of the file object | |
| * @mei_hdr: header of mei client message | |
| * | |
| * returns !=0 if matches, 0 if no match. | |
| */ | |
| static int _mei_irq_thread_state_ok(struct mei_cl *cl, | |
| struct mei_msg_hdr *mei_hdr) | |
| { | |
| return (cl->host_client_id == mei_hdr->host_addr && | |
| cl->me_client_id == mei_hdr->me_addr && | |
| cl->state == MEI_FILE_CONNECTED && | |
| MEI_READ_COMPLETE != cl->reading_state); | |
| } | |
| /** | |
| * mei_irq_thread_read_client_message - bottom half read routine after ISR to | |
| * handle the read mei client message data processing. | |
| * | |
| * @complete_list: An instance of our list structure | |
| * @dev: the device structure | |
| * @mei_hdr: header of mei client message | |
| * | |
| * returns 0 on success, <0 on failure. | |
| */ | |
| static int mei_irq_thread_read_client_message(struct mei_cl_cb *complete_list, | |
| struct mei_device *dev, | |
| struct mei_msg_hdr *mei_hdr) | |
| { | |
| struct mei_cl *cl; | |
| struct mei_cl_cb *cb_pos = NULL, *cb_next = NULL; | |
| unsigned char *buffer = NULL; | |
| dev_dbg(&dev->pdev->dev, "start client msg\n"); | |
| if (list_empty(&dev->read_list.list)) | |
| goto quit; | |
| list_for_each_entry_safe(cb_pos, cb_next, &dev->read_list.list, list) { | |
| cl = cb_pos->cl; | |
| if (cl && _mei_irq_thread_state_ok(cl, mei_hdr)) { | |
| cl->reading_state = MEI_READING; | |
| buffer = cb_pos->response_buffer.data + cb_pos->buf_idx; | |
| if (cb_pos->response_buffer.size < | |
| mei_hdr->length + cb_pos->buf_idx) { | |
| dev_dbg(&dev->pdev->dev, "message overflow.\n"); | |
| list_del(&cb_pos->list); | |
| return -ENOMEM; | |
| } | |
| if (buffer) | |
| mei_read_slots(dev, buffer, mei_hdr->length); | |
| cb_pos->buf_idx += mei_hdr->length; | |
| if (mei_hdr->msg_complete) { | |
| cl->status = 0; | |
| list_del(&cb_pos->list); | |
| dev_dbg(&dev->pdev->dev, | |
| "completed read H cl = %d, ME cl = %d, length = %lu\n", | |
| cl->host_client_id, | |
| cl->me_client_id, | |
| cb_pos->buf_idx); | |
| list_add_tail(&cb_pos->list, | |
| &complete_list->list); | |
| } | |
| break; | |
| } | |
| } | |
| quit: | |
| dev_dbg(&dev->pdev->dev, "message read\n"); | |
| if (!buffer) { | |
| mei_read_slots(dev, dev->rd_msg_buf, mei_hdr->length); | |
| dev_dbg(&dev->pdev->dev, "discarding message " MEI_HDR_FMT "\n", | |
| MEI_HDR_PRM(mei_hdr)); | |
| } | |
| return 0; | |
| } | |
| /** | |
| * _mei_irq_thread_close - processes close related operation. | |
| * | |
| * @dev: the device structure. | |
| * @slots: free slots. | |
| * @cb_pos: callback block. | |
| * @cl: private data of the file object. | |
| * @cmpl_list: complete list. | |
| * | |
| * returns 0, OK; otherwise, error. | |
| */ | |
| static int _mei_irq_thread_close(struct mei_device *dev, s32 *slots, | |
| struct mei_cl_cb *cb_pos, | |
| struct mei_cl *cl, | |
| struct mei_cl_cb *cmpl_list) | |
| { | |
| if ((*slots * sizeof(u32)) < (sizeof(struct mei_msg_hdr) + | |
| sizeof(struct hbm_client_connect_request))) | |
| return -EBADMSG; | |
| *slots -= mei_data2slots(sizeof(struct hbm_client_connect_request)); | |
| if (mei_hbm_cl_disconnect_req(dev, cl)) { | |
| cl->status = 0; | |
| cb_pos->buf_idx = 0; | |
| list_move_tail(&cb_pos->list, &cmpl_list->list); | |
| return -EMSGSIZE; | |
| } else { | |
| cl->state = MEI_FILE_DISCONNECTING; | |
| cl->status = 0; | |
| cb_pos->buf_idx = 0; | |
| list_move_tail(&cb_pos->list, &dev->ctrl_rd_list.list); | |
| cl->timer_count = MEI_CONNECT_TIMEOUT; | |
| } | |
| return 0; | |
| } | |
| /** | |
| * _mei_hb_read - processes read related operation. | |
| * | |
| * @dev: the device structure. | |
| * @slots: free slots. | |
| * @cb_pos: callback block. | |
| * @cl: private data of the file object. | |
| * @cmpl_list: complete list. | |
| * | |
| * returns 0, OK; otherwise, error. | |
| */ | |
| static int _mei_irq_thread_read(struct mei_device *dev, s32 *slots, | |
| struct mei_cl_cb *cb_pos, | |
| struct mei_cl *cl, | |
| struct mei_cl_cb *cmpl_list) | |
| { | |
| if ((*slots * sizeof(u32)) < (sizeof(struct mei_msg_hdr) + | |
| sizeof(struct hbm_flow_control))) { | |
| /* return the cancel routine */ | |
| list_del(&cb_pos->list); | |
| return -EBADMSG; | |
| } | |
| *slots -= mei_data2slots(sizeof(struct hbm_flow_control)); | |
| if (mei_hbm_cl_flow_control_req(dev, cl)) { | |
| cl->status = -ENODEV; | |
| cb_pos->buf_idx = 0; | |
| list_move_tail(&cb_pos->list, &cmpl_list->list); | |
| return -ENODEV; | |
| } | |
| list_move_tail(&cb_pos->list, &dev->read_list.list); | |
| return 0; | |
| } | |
| /** | |
| * _mei_irq_thread_ioctl - processes ioctl related operation. | |
| * | |
| * @dev: the device structure. | |
| * @slots: free slots. | |
| * @cb_pos: callback block. | |
| * @cl: private data of the file object. | |
| * @cmpl_list: complete list. | |
| * | |
| * returns 0, OK; otherwise, error. | |
| */ | |
| static int _mei_irq_thread_ioctl(struct mei_device *dev, s32 *slots, | |
| struct mei_cl_cb *cb_pos, | |
| struct mei_cl *cl, | |
| struct mei_cl_cb *cmpl_list) | |
| { | |
| if ((*slots * sizeof(u32)) < (sizeof(struct mei_msg_hdr) + | |
| sizeof(struct hbm_client_connect_request))) { | |
| /* return the cancel routine */ | |
| list_del(&cb_pos->list); | |
| return -EBADMSG; | |
| } | |
| cl->state = MEI_FILE_CONNECTING; | |
| *slots -= mei_data2slots(sizeof(struct hbm_client_connect_request)); | |
| if (mei_hbm_cl_connect_req(dev, cl)) { | |
| cl->status = -ENODEV; | |
| cb_pos->buf_idx = 0; | |
| list_del(&cb_pos->list); | |
| return -ENODEV; | |
| } else { | |
| list_move_tail(&cb_pos->list, &dev->ctrl_rd_list.list); | |
| cl->timer_count = MEI_CONNECT_TIMEOUT; | |
| } | |
| return 0; | |
| } | |
| /** | |
| * mei_irq_thread_write_complete - write messages to device. | |
| * | |
| * @dev: the device structure. | |
| * @slots: free slots. | |
| * @cb: callback block. | |
| * @cmpl_list: complete list. | |
| * | |
| * returns 0, OK; otherwise, error. | |
| */ | |
| static int mei_irq_thread_write_complete(struct mei_device *dev, s32 *slots, | |
| struct mei_cl_cb *cb, struct mei_cl_cb *cmpl_list) | |
| { | |
| struct mei_msg_hdr mei_hdr; | |
| struct mei_cl *cl = cb->cl; | |
| size_t len = cb->request_buffer.size - cb->buf_idx; | |
| size_t msg_slots = mei_data2slots(len); | |
| mei_hdr.host_addr = cl->host_client_id; | |
| mei_hdr.me_addr = cl->me_client_id; | |
| mei_hdr.reserved = 0; | |
| if (*slots >= msg_slots) { | |
| mei_hdr.length = len; | |
| mei_hdr.msg_complete = 1; | |
| /* Split the message only if we can write the whole host buffer */ | |
| } else if (*slots == dev->hbuf_depth) { | |
| msg_slots = *slots; | |
| len = (*slots * sizeof(u32)) - sizeof(struct mei_msg_hdr); | |
| mei_hdr.length = len; | |
| mei_hdr.msg_complete = 0; | |
| } else { | |
| /* wait for next time the host buffer is empty */ | |
| return 0; | |
| } | |
| dev_dbg(&dev->pdev->dev, "buf: size = %d idx = %lu\n", | |
| cb->request_buffer.size, cb->buf_idx); | |
| dev_dbg(&dev->pdev->dev, MEI_HDR_FMT, MEI_HDR_PRM(&mei_hdr)); | |
| *slots -= msg_slots; | |
| if (mei_write_message(dev, &mei_hdr, | |
| cb->request_buffer.data + cb->buf_idx)) { | |
| cl->status = -ENODEV; | |
| list_move_tail(&cb->list, &cmpl_list->list); | |
| return -ENODEV; | |
| } | |
| if (mei_cl_flow_ctrl_reduce(cl)) | |
| return -ENODEV; | |
| cl->status = 0; | |
| cb->buf_idx += mei_hdr.length; | |
| if (mei_hdr.msg_complete) | |
| list_move_tail(&cb->list, &dev->write_waiting_list.list); | |
| return 0; | |
| } | |
| /** | |
| * mei_irq_thread_read_handler - bottom half read routine after ISR to | |
| * handle the read processing. | |
| * | |
| * @dev: the device structure | |
| * @cmpl_list: An instance of our list structure | |
| * @slots: slots to read. | |
| * | |
| * returns 0 on success, <0 on failure. | |
| */ | |
| int mei_irq_read_handler(struct mei_device *dev, | |
| struct mei_cl_cb *cmpl_list, s32 *slots) | |
| { | |
| struct mei_msg_hdr *mei_hdr; | |
| struct mei_cl *cl_pos = NULL; | |
| struct mei_cl *cl_next = NULL; | |
| int ret = 0; | |
| if (!dev->rd_msg_hdr) { | |
| dev->rd_msg_hdr = mei_read_hdr(dev); | |
| dev_dbg(&dev->pdev->dev, "slots =%08x.\n", *slots); | |
| (*slots)--; | |
| dev_dbg(&dev->pdev->dev, "slots =%08x.\n", *slots); | |
| } | |
| mei_hdr = (struct mei_msg_hdr *) &dev->rd_msg_hdr; | |
| dev_dbg(&dev->pdev->dev, MEI_HDR_FMT, MEI_HDR_PRM(mei_hdr)); | |
| if (mei_hdr->reserved || !dev->rd_msg_hdr) { | |
| dev_dbg(&dev->pdev->dev, "corrupted message header.\n"); | |
| ret = -EBADMSG; | |
| goto end; | |
| } | |
| if (mei_hdr->host_addr || mei_hdr->me_addr) { | |
| list_for_each_entry_safe(cl_pos, cl_next, | |
| &dev->file_list, link) { | |
| dev_dbg(&dev->pdev->dev, | |
| "list_for_each_entry_safe read host" | |
| " client = %d, ME client = %d\n", | |
| cl_pos->host_client_id, | |
| cl_pos->me_client_id); | |
| if (cl_pos->host_client_id == mei_hdr->host_addr && | |
| cl_pos->me_client_id == mei_hdr->me_addr) | |
| break; | |
| } | |
| if (&cl_pos->link == &dev->file_list) { | |
| dev_dbg(&dev->pdev->dev, "corrupted message header\n"); | |
| ret = -EBADMSG; | |
| goto end; | |
| } | |
| } | |
| if (((*slots) * sizeof(u32)) < mei_hdr->length) { | |
| dev_dbg(&dev->pdev->dev, | |
| "we can't read the message slots =%08x.\n", | |
| *slots); | |
| /* we can't read the message */ | |
| ret = -ERANGE; | |
| goto end; | |
| } | |
| /* decide where to read the message too */ | |
| if (!mei_hdr->host_addr) { | |
| dev_dbg(&dev->pdev->dev, "call mei_irq_thread_read_bus_message.\n"); | |
| mei_hbm_dispatch(dev, mei_hdr); | |
| dev_dbg(&dev->pdev->dev, "end mei_irq_thread_read_bus_message.\n"); | |
| } else if (mei_hdr->host_addr == dev->iamthif_cl.host_client_id && | |
| (MEI_FILE_CONNECTED == dev->iamthif_cl.state) && | |
| (dev->iamthif_state == MEI_IAMTHIF_READING)) { | |
| dev_dbg(&dev->pdev->dev, "call mei_irq_thread_read_iamthif_message.\n"); | |
| dev_dbg(&dev->pdev->dev, MEI_HDR_FMT, MEI_HDR_PRM(mei_hdr)); | |
| ret = mei_amthif_irq_read_message(cmpl_list, dev, mei_hdr); | |
| if (ret) | |
| goto end; | |
| } else { | |
| dev_dbg(&dev->pdev->dev, "call mei_irq_thread_read_client_message.\n"); | |
| ret = mei_irq_thread_read_client_message(cmpl_list, | |
| dev, mei_hdr); | |
| if (ret) | |
| goto end; | |
| } | |
| /* reset the number of slots and header */ | |
| *slots = mei_count_full_read_slots(dev); | |
| dev->rd_msg_hdr = 0; | |
| if (*slots == -EOVERFLOW) { | |
| /* overflow - reset */ | |
| dev_dbg(&dev->pdev->dev, "resetting due to slots overflow.\n"); | |
| /* set the event since message has been read */ | |
| ret = -ERANGE; | |
| goto end; | |
| } | |
| end: | |
| return ret; | |
| } | |
| /** | |
| * mei_irq_write_handler - dispatch write requests | |
| * after irq received | |
| * | |
| * @dev: the device structure | |
| * @cmpl_list: An instance of our list structure | |
| * | |
| * returns 0 on success, <0 on failure. | |
| */ | |
| int mei_irq_write_handler(struct mei_device *dev, | |
| struct mei_cl_cb *cmpl_list) | |
| { | |
| struct mei_cl *cl; | |
| struct mei_cl_cb *pos = NULL, *next = NULL; | |
| struct mei_cl_cb *list; | |
| s32 slots; | |
| int ret; | |
| if (!mei_hbuf_is_ready(dev)) { | |
| dev_dbg(&dev->pdev->dev, "host buffer is not empty.\n"); | |
| return 0; | |
| } | |
| slots = mei_hbuf_empty_slots(dev); | |
| if (slots <= 0) | |
| return -EMSGSIZE; | |
| /* complete all waiting for write CB */ | |
| dev_dbg(&dev->pdev->dev, "complete all waiting for write cb.\n"); | |
| list = &dev->write_waiting_list; | |
| list_for_each_entry_safe(pos, next, &list->list, list) { | |
| cl = pos->cl; | |
| if (cl == NULL) | |
| continue; | |
| cl->status = 0; | |
| list_del(&pos->list); | |
| if (MEI_WRITING == cl->writing_state && | |
| pos->fop_type == MEI_FOP_WRITE && | |
| cl != &dev->iamthif_cl) { | |
| dev_dbg(&dev->pdev->dev, "MEI WRITE COMPLETE\n"); | |
| cl->writing_state = MEI_WRITE_COMPLETE; | |
| list_add_tail(&pos->list, &cmpl_list->list); | |
| } | |
| if (cl == &dev->iamthif_cl) { | |
| dev_dbg(&dev->pdev->dev, "check iamthif flow control.\n"); | |
| if (dev->iamthif_flow_control_pending) { | |
| ret = mei_amthif_irq_read(dev, &slots); | |
| if (ret) | |
| return ret; | |
| } | |
| } | |
| } | |
| if (dev->wd_state == MEI_WD_STOPPING) { | |
| dev->wd_state = MEI_WD_IDLE; | |
| wake_up_interruptible(&dev->wait_stop_wd); | |
| } | |
| if (dev->wr_ext_msg.hdr.length) { | |
| mei_write_message(dev, &dev->wr_ext_msg.hdr, | |
| dev->wr_ext_msg.data); | |
| slots -= mei_data2slots(dev->wr_ext_msg.hdr.length); | |
| dev->wr_ext_msg.hdr.length = 0; | |
| } | |
| if (dev->dev_state == MEI_DEV_ENABLED) { | |
| if (dev->wd_pending && | |
| mei_cl_flow_ctrl_creds(&dev->wd_cl) > 0) { | |
| if (mei_wd_send(dev)) | |
| dev_dbg(&dev->pdev->dev, "wd send failed.\n"); | |
| else if (mei_cl_flow_ctrl_reduce(&dev->wd_cl)) | |
| return -ENODEV; | |
| dev->wd_pending = false; | |
| if (dev->wd_state == MEI_WD_RUNNING) | |
| slots -= mei_data2slots(MEI_WD_START_MSG_SIZE); | |
| else | |
| slots -= mei_data2slots(MEI_WD_STOP_MSG_SIZE); | |
| } | |
| } | |
| /* complete control write list CB */ | |
| dev_dbg(&dev->pdev->dev, "complete control write list cb.\n"); | |
| list_for_each_entry_safe(pos, next, &dev->ctrl_wr_list.list, list) { | |
| cl = pos->cl; | |
| if (!cl) { | |
| list_del(&pos->list); | |
| return -ENODEV; | |
| } | |
| switch (pos->fop_type) { | |
| case MEI_FOP_CLOSE: | |
| /* send disconnect message */ | |
| ret = _mei_irq_thread_close(dev, &slots, pos, | |
| cl, cmpl_list); | |
| if (ret) | |
| return ret; | |
| break; | |
| case MEI_FOP_READ: | |
| /* send flow control message */ | |
| ret = _mei_irq_thread_read(dev, &slots, pos, | |
| cl, cmpl_list); | |
| if (ret) | |
| return ret; | |
| break; | |
| case MEI_FOP_IOCTL: | |
| /* connect message */ | |
| if (mei_cl_is_other_connecting(cl)) | |
| continue; | |
| ret = _mei_irq_thread_ioctl(dev, &slots, pos, | |
| cl, cmpl_list); | |
| if (ret) | |
| return ret; | |
| break; | |
| default: | |
| BUG(); | |
| } | |
| } | |
| /* complete write list CB */ | |
| dev_dbg(&dev->pdev->dev, "complete write list cb.\n"); | |
| list_for_each_entry_safe(pos, next, &dev->write_list.list, list) { | |
| cl = pos->cl; | |
| if (cl == NULL) | |
| continue; | |
| if (mei_cl_flow_ctrl_creds(cl) <= 0) { | |
| dev_dbg(&dev->pdev->dev, | |
| "No flow control credentials for client %d, not sending.\n", | |
| cl->host_client_id); | |
| continue; | |
| } | |
| if (cl == &dev->iamthif_cl) | |
| ret = mei_amthif_irq_write_complete(dev, &slots, | |
| pos, cmpl_list); | |
| else | |
| ret = mei_irq_thread_write_complete(dev, &slots, pos, | |
| cmpl_list); | |
| if (ret) | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| /** | |
| * mei_timer - timer function. | |
| * | |
| * @work: pointer to the work_struct structure | |
| * | |
| * NOTE: This function is called by timer interrupt work | |
| */ | |
| void mei_timer(struct work_struct *work) | |
| { | |
| unsigned long timeout; | |
| struct mei_cl *cl_pos = NULL; | |
| struct mei_cl *cl_next = NULL; | |
| struct mei_cl_cb *cb_pos = NULL; | |
| struct mei_cl_cb *cb_next = NULL; | |
| struct mei_device *dev = container_of(work, | |
| struct mei_device, timer_work.work); | |
| mutex_lock(&dev->device_lock); | |
| if (dev->dev_state != MEI_DEV_ENABLED) { | |
| if (dev->dev_state == MEI_DEV_INIT_CLIENTS) { | |
| if (dev->init_clients_timer) { | |
| if (--dev->init_clients_timer == 0) { | |
| dev_dbg(&dev->pdev->dev, "IMEI reset due to init clients timeout ,init clients state = %d.\n", | |
| dev->init_clients_state); | |
| mei_reset(dev, 1); | |
| } | |
| } | |
| } | |
| goto out; | |
| } | |
| /*** connect/disconnect timeouts ***/ | |
| list_for_each_entry_safe(cl_pos, cl_next, &dev->file_list, link) { | |
| if (cl_pos->timer_count) { | |
| if (--cl_pos->timer_count == 0) { | |
| dev_dbg(&dev->pdev->dev, "HECI reset due to connect/disconnect timeout.\n"); | |
| mei_reset(dev, 1); | |
| goto out; | |
| } | |
| } | |
| } | |
| if (dev->iamthif_stall_timer) { | |
| if (--dev->iamthif_stall_timer == 0) { | |
| dev_dbg(&dev->pdev->dev, "resetting because of hang to amthi.\n"); | |
| mei_reset(dev, 1); | |
| dev->iamthif_msg_buf_size = 0; | |
| dev->iamthif_msg_buf_index = 0; | |
| dev->iamthif_canceled = false; | |
| dev->iamthif_ioctl = true; | |
| dev->iamthif_state = MEI_IAMTHIF_IDLE; | |
| dev->iamthif_timer = 0; | |
| mei_io_cb_free(dev->iamthif_current_cb); | |
| dev->iamthif_current_cb = NULL; | |
| dev->iamthif_file_object = NULL; | |
| mei_amthif_run_next_cmd(dev); | |
| } | |
| } | |
| if (dev->iamthif_timer) { | |
| timeout = dev->iamthif_timer + | |
| mei_secs_to_jiffies(MEI_IAMTHIF_READ_TIMER); | |
| dev_dbg(&dev->pdev->dev, "dev->iamthif_timer = %ld\n", | |
| dev->iamthif_timer); | |
| dev_dbg(&dev->pdev->dev, "timeout = %ld\n", timeout); | |
| dev_dbg(&dev->pdev->dev, "jiffies = %ld\n", jiffies); | |
| if (time_after(jiffies, timeout)) { | |
| /* | |
| * User didn't read the AMTHI data on time (15sec) | |
| * freeing AMTHI for other requests | |
| */ | |
| dev_dbg(&dev->pdev->dev, "freeing AMTHI for other requests\n"); | |
| list_for_each_entry_safe(cb_pos, cb_next, | |
| &dev->amthif_rd_complete_list.list, list) { | |
| cl_pos = cb_pos->file_object->private_data; | |
| /* Finding the AMTHI entry. */ | |
| if (cl_pos == &dev->iamthif_cl) | |
| list_del(&cb_pos->list); | |
| } | |
| mei_io_cb_free(dev->iamthif_current_cb); | |
| dev->iamthif_current_cb = NULL; | |
| dev->iamthif_file_object->private_data = NULL; | |
| dev->iamthif_file_object = NULL; | |
| dev->iamthif_timer = 0; | |
| mei_amthif_run_next_cmd(dev); | |
| } | |
| } | |
| out: | |
| schedule_delayed_work(&dev->timer_work, 2 * HZ); | |
| mutex_unlock(&dev->device_lock); | |
| } | |