| /* | |
| * dvb_frontend.c: DVB frontend tuning interface/thread | |
| * | |
| * | |
| * Copyright (C) 1999-2001 Ralph Metzler | |
| * Marcus Metzler | |
| * Holger Waechtler | |
| * for convergence integrated media GmbH | |
| * | |
| * Copyright (C) 2004 Andrew de Quincey (tuning thread cleanup) | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License | |
| * as published by the Free Software Foundation; either version 2 | |
| * of the License, or (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. | |
| * Or, point your browser to http://www.gnu.org/copyleft/gpl.html | |
| */ | |
| /* Enables DVBv3 compatibility bits at the headers */ | |
| #define __DVB_CORE__ | |
| #include <linux/string.h> | |
| #include <linux/kernel.h> | |
| #include <linux/sched.h> | |
| #include <linux/wait.h> | |
| #include <linux/slab.h> | |
| #include <linux/poll.h> | |
| #include <linux/semaphore.h> | |
| #include <linux/module.h> | |
| #include <linux/list.h> | |
| #include <linux/freezer.h> | |
| #include <linux/jiffies.h> | |
| #include <linux/kthread.h> | |
| #include <asm/processor.h> | |
| #include "dvb_frontend.h" | |
| #include "dvbdev.h" | |
| #include <linux/dvb/version.h> | |
| static int dvb_frontend_debug; | |
| static int dvb_shutdown_timeout; | |
| static int dvb_force_auto_inversion; | |
| static int dvb_override_tune_delay; | |
| static int dvb_powerdown_on_sleep = 1; | |
| static int dvb_mfe_wait_time = 5; | |
| module_param_named(frontend_debug, dvb_frontend_debug, int, 0644); | |
| MODULE_PARM_DESC(frontend_debug, "Turn on/off frontend core debugging (default:off)."); | |
| module_param(dvb_shutdown_timeout, int, 0644); | |
| MODULE_PARM_DESC(dvb_shutdown_timeout, "wait <shutdown_timeout> seconds after close() before suspending hardware"); | |
| module_param(dvb_force_auto_inversion, int, 0644); | |
| MODULE_PARM_DESC(dvb_force_auto_inversion, "0: normal (default), 1: INVERSION_AUTO forced always"); | |
| module_param(dvb_override_tune_delay, int, 0644); | |
| MODULE_PARM_DESC(dvb_override_tune_delay, "0: normal (default), >0 => delay in milliseconds to wait for lock after a tune attempt"); | |
| module_param(dvb_powerdown_on_sleep, int, 0644); | |
| MODULE_PARM_DESC(dvb_powerdown_on_sleep, "0: do not power down, 1: turn LNB voltage off on sleep (default)"); | |
| module_param(dvb_mfe_wait_time, int, 0644); | |
| MODULE_PARM_DESC(dvb_mfe_wait_time, "Wait up to <mfe_wait_time> seconds on open() for multi-frontend to become available (default:5 seconds)"); | |
| #define FESTATE_IDLE 1 | |
| #define FESTATE_RETUNE 2 | |
| #define FESTATE_TUNING_FAST 4 | |
| #define FESTATE_TUNING_SLOW 8 | |
| #define FESTATE_TUNED 16 | |
| #define FESTATE_ZIGZAG_FAST 32 | |
| #define FESTATE_ZIGZAG_SLOW 64 | |
| #define FESTATE_DISEQC 128 | |
| #define FESTATE_ERROR 256 | |
| #define FESTATE_WAITFORLOCK (FESTATE_TUNING_FAST | FESTATE_TUNING_SLOW | FESTATE_ZIGZAG_FAST | FESTATE_ZIGZAG_SLOW | FESTATE_DISEQC) | |
| #define FESTATE_SEARCHING_FAST (FESTATE_TUNING_FAST | FESTATE_ZIGZAG_FAST) | |
| #define FESTATE_SEARCHING_SLOW (FESTATE_TUNING_SLOW | FESTATE_ZIGZAG_SLOW) | |
| #define FESTATE_LOSTLOCK (FESTATE_ZIGZAG_FAST | FESTATE_ZIGZAG_SLOW) | |
| #define FE_ALGO_HW 1 | |
| /* | |
| * FESTATE_IDLE. No tuning parameters have been supplied and the loop is idling. | |
| * FESTATE_RETUNE. Parameters have been supplied, but we have not yet performed the first tune. | |
| * FESTATE_TUNING_FAST. Tuning parameters have been supplied and fast zigzag scan is in progress. | |
| * FESTATE_TUNING_SLOW. Tuning parameters have been supplied. Fast zigzag failed, so we're trying again, but slower. | |
| * FESTATE_TUNED. The frontend has successfully locked on. | |
| * FESTATE_ZIGZAG_FAST. The lock has been lost, and a fast zigzag has been initiated to try and regain it. | |
| * FESTATE_ZIGZAG_SLOW. The lock has been lost. Fast zigzag has been failed, so we're trying again, but slower. | |
| * FESTATE_DISEQC. A DISEQC command has just been issued. | |
| * FESTATE_WAITFORLOCK. When we're waiting for a lock. | |
| * FESTATE_SEARCHING_FAST. When we're searching for a signal using a fast zigzag scan. | |
| * FESTATE_SEARCHING_SLOW. When we're searching for a signal using a slow zigzag scan. | |
| * FESTATE_LOSTLOCK. When the lock has been lost, and we're searching it again. | |
| */ | |
| #define DVB_FE_NO_EXIT 0 | |
| #define DVB_FE_NORMAL_EXIT 1 | |
| #define DVB_FE_DEVICE_REMOVED 2 | |
| static DEFINE_MUTEX(frontend_mutex); | |
| struct dvb_frontend_private { | |
| /* thread/frontend values */ | |
| struct dvb_device *dvbdev; | |
| struct dvb_frontend_parameters parameters_out; | |
| struct dvb_fe_events events; | |
| struct semaphore sem; | |
| struct list_head list_head; | |
| wait_queue_head_t wait_queue; | |
| struct task_struct *thread; | |
| unsigned long release_jiffies; | |
| unsigned int exit; | |
| unsigned int wakeup; | |
| fe_status_t status; | |
| unsigned long tune_mode_flags; | |
| unsigned int delay; | |
| unsigned int reinitialise; | |
| int tone; | |
| int voltage; | |
| /* swzigzag values */ | |
| unsigned int state; | |
| unsigned int bending; | |
| int lnb_drift; | |
| unsigned int inversion; | |
| unsigned int auto_step; | |
| unsigned int auto_sub_step; | |
| unsigned int started_auto_step; | |
| unsigned int min_delay; | |
| unsigned int max_drift; | |
| unsigned int step_size; | |
| int quality; | |
| unsigned int check_wrapped; | |
| enum dvbfe_search algo_status; | |
| }; | |
| static void dvb_frontend_wakeup(struct dvb_frontend *fe); | |
| static int dtv_get_frontend(struct dvb_frontend *fe, | |
| struct dvb_frontend_parameters *p_out); | |
| static int dtv_property_legacy_params_sync(struct dvb_frontend *fe, | |
| struct dvb_frontend_parameters *p); | |
| static bool has_get_frontend(struct dvb_frontend *fe) | |
| { | |
| return fe->ops.get_frontend != NULL; | |
| } | |
| /* | |
| * Due to DVBv3 API calls, a delivery system should be mapped into one of | |
| * the 4 DVBv3 delivery systems (FE_QPSK, FE_QAM, FE_OFDM or FE_ATSC), | |
| * otherwise, a DVBv3 call will fail. | |
| */ | |
| enum dvbv3_emulation_type { | |
| DVBV3_UNKNOWN, | |
| DVBV3_QPSK, | |
| DVBV3_QAM, | |
| DVBV3_OFDM, | |
| DVBV3_ATSC, | |
| }; | |
| static enum dvbv3_emulation_type dvbv3_type(u32 delivery_system) | |
| { | |
| switch (delivery_system) { | |
| case SYS_DVBC_ANNEX_A: | |
| case SYS_DVBC_ANNEX_C: | |
| return DVBV3_QAM; | |
| case SYS_DVBS: | |
| case SYS_DVBS2: | |
| case SYS_TURBO: | |
| case SYS_ISDBS: | |
| case SYS_DSS: | |
| return DVBV3_QPSK; | |
| case SYS_DVBT: | |
| case SYS_DVBT2: | |
| case SYS_ISDBT: | |
| case SYS_DTMB: | |
| return DVBV3_OFDM; | |
| case SYS_ATSC: | |
| case SYS_ATSCMH: | |
| case SYS_DVBC_ANNEX_B: | |
| return DVBV3_ATSC; | |
| case SYS_UNDEFINED: | |
| case SYS_ISDBC: | |
| case SYS_DVBH: | |
| case SYS_DAB: | |
| default: | |
| /* | |
| * Doesn't know how to emulate those types and/or | |
| * there's no frontend driver from this type yet | |
| * with some emulation code, so, we're not sure yet how | |
| * to handle them, or they're not compatible with a DVBv3 call. | |
| */ | |
| return DVBV3_UNKNOWN; | |
| } | |
| } | |
| static void dvb_frontend_add_event(struct dvb_frontend *fe, fe_status_t status) | |
| { | |
| struct dvb_frontend_private *fepriv = fe->frontend_priv; | |
| struct dvb_fe_events *events = &fepriv->events; | |
| struct dvb_frontend_event *e; | |
| int wp; | |
| dev_dbg(fe->dvb->device, "%s:\n", __func__); | |
| if ((status & FE_HAS_LOCK) && has_get_frontend(fe)) | |
| dtv_get_frontend(fe, &fepriv->parameters_out); | |
| mutex_lock(&events->mtx); | |
| wp = (events->eventw + 1) % MAX_EVENT; | |
| if (wp == events->eventr) { | |
| events->overflow = 1; | |
| events->eventr = (events->eventr + 1) % MAX_EVENT; | |
| } | |
| e = &events->events[events->eventw]; | |
| e->status = status; | |
| e->parameters = fepriv->parameters_out; | |
| events->eventw = wp; | |
| mutex_unlock(&events->mtx); | |
| wake_up_interruptible (&events->wait_queue); | |
| } | |
| static int dvb_frontend_get_event(struct dvb_frontend *fe, | |
| struct dvb_frontend_event *event, int flags) | |
| { | |
| struct dvb_frontend_private *fepriv = fe->frontend_priv; | |
| struct dvb_fe_events *events = &fepriv->events; | |
| dev_dbg(fe->dvb->device, "%s:\n", __func__); | |
| if (events->overflow) { | |
| events->overflow = 0; | |
| return -EOVERFLOW; | |
| } | |
| if (events->eventw == events->eventr) { | |
| int ret; | |
| if (flags & O_NONBLOCK) | |
| return -EWOULDBLOCK; | |
| up(&fepriv->sem); | |
| ret = wait_event_interruptible (events->wait_queue, | |
| events->eventw != events->eventr); | |
| if (down_interruptible (&fepriv->sem)) | |
| return -ERESTARTSYS; | |
| if (ret < 0) | |
| return ret; | |
| } | |
| mutex_lock(&events->mtx); | |
| *event = events->events[events->eventr]; | |
| events->eventr = (events->eventr + 1) % MAX_EVENT; | |
| mutex_unlock(&events->mtx); | |
| return 0; | |
| } | |
| static void dvb_frontend_clear_events(struct dvb_frontend *fe) | |
| { | |
| struct dvb_frontend_private *fepriv = fe->frontend_priv; | |
| struct dvb_fe_events *events = &fepriv->events; | |
| mutex_lock(&events->mtx); | |
| events->eventr = events->eventw; | |
| mutex_unlock(&events->mtx); | |
| } | |
| static void dvb_frontend_init(struct dvb_frontend *fe) | |
| { | |
| dev_dbg(fe->dvb->device, | |
| "%s: initialising adapter %i frontend %i (%s)...\n", | |
| __func__, fe->dvb->num, fe->id, fe->ops.info.name); | |
| if (fe->ops.init) | |
| fe->ops.init(fe); | |
| if (fe->ops.tuner_ops.init) { | |
| if (fe->ops.i2c_gate_ctrl) | |
| fe->ops.i2c_gate_ctrl(fe, 1); | |
| fe->ops.tuner_ops.init(fe); | |
| if (fe->ops.i2c_gate_ctrl) | |
| fe->ops.i2c_gate_ctrl(fe, 0); | |
| } | |
| } | |
| void dvb_frontend_reinitialise(struct dvb_frontend *fe) | |
| { | |
| struct dvb_frontend_private *fepriv = fe->frontend_priv; | |
| fepriv->reinitialise = 1; | |
| dvb_frontend_wakeup(fe); | |
| } | |
| EXPORT_SYMBOL(dvb_frontend_reinitialise); | |
| static void dvb_frontend_swzigzag_update_delay(struct dvb_frontend_private *fepriv, int locked) | |
| { | |
| int q2; | |
| struct dvb_frontend *fe = fepriv->dvbdev->priv; | |
| dev_dbg(fe->dvb->device, "%s:\n", __func__); | |
| if (locked) | |
| (fepriv->quality) = (fepriv->quality * 220 + 36*256) / 256; | |
| else | |
| (fepriv->quality) = (fepriv->quality * 220 + 0) / 256; | |
| q2 = fepriv->quality - 128; | |
| q2 *= q2; | |
| fepriv->delay = fepriv->min_delay + q2 * HZ / (128*128); | |
| } | |
| /** | |
| * Performs automatic twiddling of frontend parameters. | |
| * | |
| * @param fe The frontend concerned. | |
| * @param check_wrapped Checks if an iteration has completed. DO NOT SET ON THE FIRST ATTEMPT | |
| * @returns Number of complete iterations that have been performed. | |
| */ | |
| static int dvb_frontend_swzigzag_autotune(struct dvb_frontend *fe, int check_wrapped) | |
| { | |
| int autoinversion; | |
| int ready = 0; | |
| int fe_set_err = 0; | |
| struct dvb_frontend_private *fepriv = fe->frontend_priv; | |
| struct dtv_frontend_properties *c = &fe->dtv_property_cache, tmp; | |
| int original_inversion = c->inversion; | |
| u32 original_frequency = c->frequency; | |
| /* are we using autoinversion? */ | |
| autoinversion = ((!(fe->ops.info.caps & FE_CAN_INVERSION_AUTO)) && | |
| (c->inversion == INVERSION_AUTO)); | |
| /* setup parameters correctly */ | |
| while(!ready) { | |
| /* calculate the lnb_drift */ | |
| fepriv->lnb_drift = fepriv->auto_step * fepriv->step_size; | |
| /* wrap the auto_step if we've exceeded the maximum drift */ | |
| if (fepriv->lnb_drift > fepriv->max_drift) { | |
| fepriv->auto_step = 0; | |
| fepriv->auto_sub_step = 0; | |
| fepriv->lnb_drift = 0; | |
| } | |
| /* perform inversion and +/- zigzag */ | |
| switch(fepriv->auto_sub_step) { | |
| case 0: | |
| /* try with the current inversion and current drift setting */ | |
| ready = 1; | |
| break; | |
| case 1: | |
| if (!autoinversion) break; | |
| fepriv->inversion = (fepriv->inversion == INVERSION_OFF) ? INVERSION_ON : INVERSION_OFF; | |
| ready = 1; | |
| break; | |
| case 2: | |
| if (fepriv->lnb_drift == 0) break; | |
| fepriv->lnb_drift = -fepriv->lnb_drift; | |
| ready = 1; | |
| break; | |
| case 3: | |
| if (fepriv->lnb_drift == 0) break; | |
| if (!autoinversion) break; | |
| fepriv->inversion = (fepriv->inversion == INVERSION_OFF) ? INVERSION_ON : INVERSION_OFF; | |
| fepriv->lnb_drift = -fepriv->lnb_drift; | |
| ready = 1; | |
| break; | |
| default: | |
| fepriv->auto_step++; | |
| fepriv->auto_sub_step = -1; /* it'll be incremented to 0 in a moment */ | |
| break; | |
| } | |
| if (!ready) fepriv->auto_sub_step++; | |
| } | |
| /* if this attempt would hit where we started, indicate a complete | |
| * iteration has occurred */ | |
| if ((fepriv->auto_step == fepriv->started_auto_step) && | |
| (fepriv->auto_sub_step == 0) && check_wrapped) { | |
| return 1; | |
| } | |
| dev_dbg(fe->dvb->device, "%s: drift:%i inversion:%i auto_step:%i " \ | |
| "auto_sub_step:%i started_auto_step:%i\n", | |
| __func__, fepriv->lnb_drift, fepriv->inversion, | |
| fepriv->auto_step, fepriv->auto_sub_step, | |
| fepriv->started_auto_step); | |
| /* set the frontend itself */ | |
| c->frequency += fepriv->lnb_drift; | |
| if (autoinversion) | |
| c->inversion = fepriv->inversion; | |
| tmp = *c; | |
| if (fe->ops.set_frontend) | |
| fe_set_err = fe->ops.set_frontend(fe); | |
| *c = tmp; | |
| if (fe_set_err < 0) { | |
| fepriv->state = FESTATE_ERROR; | |
| return fe_set_err; | |
| } | |
| c->frequency = original_frequency; | |
| c->inversion = original_inversion; | |
| fepriv->auto_sub_step++; | |
| return 0; | |
| } | |
| static void dvb_frontend_swzigzag(struct dvb_frontend *fe) | |
| { | |
| fe_status_t s = 0; | |
| int retval = 0; | |
| struct dvb_frontend_private *fepriv = fe->frontend_priv; | |
| struct dtv_frontend_properties *c = &fe->dtv_property_cache, tmp; | |
| /* if we've got no parameters, just keep idling */ | |
| if (fepriv->state & FESTATE_IDLE) { | |
| fepriv->delay = 3*HZ; | |
| fepriv->quality = 0; | |
| return; | |
| } | |
| /* in SCAN mode, we just set the frontend when asked and leave it alone */ | |
| if (fepriv->tune_mode_flags & FE_TUNE_MODE_ONESHOT) { | |
| if (fepriv->state & FESTATE_RETUNE) { | |
| tmp = *c; | |
| if (fe->ops.set_frontend) | |
| retval = fe->ops.set_frontend(fe); | |
| *c = tmp; | |
| if (retval < 0) | |
| fepriv->state = FESTATE_ERROR; | |
| else | |
| fepriv->state = FESTATE_TUNED; | |
| } | |
| fepriv->delay = 3*HZ; | |
| fepriv->quality = 0; | |
| return; | |
| } | |
| /* get the frontend status */ | |
| if (fepriv->state & FESTATE_RETUNE) { | |
| s = 0; | |
| } else { | |
| if (fe->ops.read_status) | |
| fe->ops.read_status(fe, &s); | |
| if (s != fepriv->status) { | |
| dvb_frontend_add_event(fe, s); | |
| fepriv->status = s; | |
| } | |
| } | |
| /* if we're not tuned, and we have a lock, move to the TUNED state */ | |
| if ((fepriv->state & FESTATE_WAITFORLOCK) && (s & FE_HAS_LOCK)) { | |
| dvb_frontend_swzigzag_update_delay(fepriv, s & FE_HAS_LOCK); | |
| fepriv->state = FESTATE_TUNED; | |
| /* if we're tuned, then we have determined the correct inversion */ | |
| if ((!(fe->ops.info.caps & FE_CAN_INVERSION_AUTO)) && | |
| (c->inversion == INVERSION_AUTO)) { | |
| c->inversion = fepriv->inversion; | |
| } | |
| return; | |
| } | |
| /* if we are tuned already, check we're still locked */ | |
| if (fepriv->state & FESTATE_TUNED) { | |
| dvb_frontend_swzigzag_update_delay(fepriv, s & FE_HAS_LOCK); | |
| /* we're tuned, and the lock is still good... */ | |
| if (s & FE_HAS_LOCK) { | |
| return; | |
| } else { /* if we _WERE_ tuned, but now don't have a lock */ | |
| fepriv->state = FESTATE_ZIGZAG_FAST; | |
| fepriv->started_auto_step = fepriv->auto_step; | |
| fepriv->check_wrapped = 0; | |
| } | |
| } | |
| /* don't actually do anything if we're in the LOSTLOCK state, | |
| * the frontend is set to FE_CAN_RECOVER, and the max_drift is 0 */ | |
| if ((fepriv->state & FESTATE_LOSTLOCK) && | |
| (fe->ops.info.caps & FE_CAN_RECOVER) && (fepriv->max_drift == 0)) { | |
| dvb_frontend_swzigzag_update_delay(fepriv, s & FE_HAS_LOCK); | |
| return; | |
| } | |
| /* don't do anything if we're in the DISEQC state, since this | |
| * might be someone with a motorized dish controlled by DISEQC. | |
| * If its actually a re-tune, there will be a SET_FRONTEND soon enough. */ | |
| if (fepriv->state & FESTATE_DISEQC) { | |
| dvb_frontend_swzigzag_update_delay(fepriv, s & FE_HAS_LOCK); | |
| return; | |
| } | |
| /* if we're in the RETUNE state, set everything up for a brand | |
| * new scan, keeping the current inversion setting, as the next | |
| * tune is _very_ likely to require the same */ | |
| if (fepriv->state & FESTATE_RETUNE) { | |
| fepriv->lnb_drift = 0; | |
| fepriv->auto_step = 0; | |
| fepriv->auto_sub_step = 0; | |
| fepriv->started_auto_step = 0; | |
| fepriv->check_wrapped = 0; | |
| } | |
| /* fast zigzag. */ | |
| if ((fepriv->state & FESTATE_SEARCHING_FAST) || (fepriv->state & FESTATE_RETUNE)) { | |
| fepriv->delay = fepriv->min_delay; | |
| /* perform a tune */ | |
| retval = dvb_frontend_swzigzag_autotune(fe, | |
| fepriv->check_wrapped); | |
| if (retval < 0) { | |
| return; | |
| } else if (retval) { | |
| /* OK, if we've run out of trials at the fast speed. | |
| * Drop back to slow for the _next_ attempt */ | |
| fepriv->state = FESTATE_SEARCHING_SLOW; | |
| fepriv->started_auto_step = fepriv->auto_step; | |
| return; | |
| } | |
| fepriv->check_wrapped = 1; | |
| /* if we've just retuned, enter the ZIGZAG_FAST state. | |
| * This ensures we cannot return from an | |
| * FE_SET_FRONTEND ioctl before the first frontend tune | |
| * occurs */ | |
| if (fepriv->state & FESTATE_RETUNE) { | |
| fepriv->state = FESTATE_TUNING_FAST; | |
| } | |
| } | |
| /* slow zigzag */ | |
| if (fepriv->state & FESTATE_SEARCHING_SLOW) { | |
| dvb_frontend_swzigzag_update_delay(fepriv, s & FE_HAS_LOCK); | |
| /* Note: don't bother checking for wrapping; we stay in this | |
| * state until we get a lock */ | |
| dvb_frontend_swzigzag_autotune(fe, 0); | |
| } | |
| } | |
| static int dvb_frontend_is_exiting(struct dvb_frontend *fe) | |
| { | |
| struct dvb_frontend_private *fepriv = fe->frontend_priv; | |
| if (fepriv->exit != DVB_FE_NO_EXIT) | |
| return 1; | |
| if (fepriv->dvbdev->writers == 1) | |
| if (time_after_eq(jiffies, fepriv->release_jiffies + | |
| dvb_shutdown_timeout * HZ)) | |
| return 1; | |
| return 0; | |
| } | |
| static int dvb_frontend_should_wakeup(struct dvb_frontend *fe) | |
| { | |
| struct dvb_frontend_private *fepriv = fe->frontend_priv; | |
| if (fepriv->wakeup) { | |
| fepriv->wakeup = 0; | |
| return 1; | |
| } | |
| return dvb_frontend_is_exiting(fe); | |
| } | |
| static void dvb_frontend_wakeup(struct dvb_frontend *fe) | |
| { | |
| struct dvb_frontend_private *fepriv = fe->frontend_priv; | |
| fepriv->wakeup = 1; | |
| wake_up_interruptible(&fepriv->wait_queue); | |
| } | |
| static int dvb_frontend_thread(void *data) | |
| { | |
| struct dvb_frontend *fe = data; | |
| struct dvb_frontend_private *fepriv = fe->frontend_priv; | |
| fe_status_t s; | |
| enum dvbfe_algo algo; | |
| bool re_tune = false; | |
| bool semheld = false; | |
| dev_dbg(fe->dvb->device, "%s:\n", __func__); | |
| fepriv->check_wrapped = 0; | |
| fepriv->quality = 0; | |
| fepriv->delay = 3*HZ; | |
| fepriv->status = 0; | |
| fepriv->wakeup = 0; | |
| fepriv->reinitialise = 0; | |
| dvb_frontend_init(fe); | |
| set_freezable(); | |
| while (1) { | |
| up(&fepriv->sem); /* is locked when we enter the thread... */ | |
| restart: | |
| wait_event_interruptible_timeout(fepriv->wait_queue, | |
| dvb_frontend_should_wakeup(fe) || kthread_should_stop() | |
| || freezing(current), | |
| fepriv->delay); | |
| if (kthread_should_stop() || dvb_frontend_is_exiting(fe)) { | |
| /* got signal or quitting */ | |
| if (!down_interruptible(&fepriv->sem)) | |
| semheld = true; | |
| fepriv->exit = DVB_FE_NORMAL_EXIT; | |
| break; | |
| } | |
| if (try_to_freeze()) | |
| goto restart; | |
| if (down_interruptible(&fepriv->sem)) | |
| break; | |
| if (fepriv->reinitialise) { | |
| dvb_frontend_init(fe); | |
| if (fe->ops.set_tone && fepriv->tone != -1) | |
| fe->ops.set_tone(fe, fepriv->tone); | |
| if (fe->ops.set_voltage && fepriv->voltage != -1) | |
| fe->ops.set_voltage(fe, fepriv->voltage); | |
| fepriv->reinitialise = 0; | |
| } | |
| /* do an iteration of the tuning loop */ | |
| if (fe->ops.get_frontend_algo) { | |
| algo = fe->ops.get_frontend_algo(fe); | |
| switch (algo) { | |
| case DVBFE_ALGO_HW: | |
| dev_dbg(fe->dvb->device, "%s: Frontend ALGO = DVBFE_ALGO_HW\n", __func__); | |
| if (fepriv->state & FESTATE_RETUNE) { | |
| dev_dbg(fe->dvb->device, "%s: Retune requested, FESTATE_RETUNE\n", __func__); | |
| re_tune = true; | |
| fepriv->state = FESTATE_TUNED; | |
| } else { | |
| re_tune = false; | |
| } | |
| if (fe->ops.tune) | |
| fe->ops.tune(fe, re_tune, fepriv->tune_mode_flags, &fepriv->delay, &s); | |
| if (s != fepriv->status && !(fepriv->tune_mode_flags & FE_TUNE_MODE_ONESHOT)) { | |
| dev_dbg(fe->dvb->device, "%s: state changed, adding current state\n", __func__); | |
| dvb_frontend_add_event(fe, s); | |
| fepriv->status = s; | |
| } | |
| break; | |
| case DVBFE_ALGO_SW: | |
| dev_dbg(fe->dvb->device, "%s: Frontend ALGO = DVBFE_ALGO_SW\n", __func__); | |
| dvb_frontend_swzigzag(fe); | |
| break; | |
| case DVBFE_ALGO_CUSTOM: | |
| dev_dbg(fe->dvb->device, "%s: Frontend ALGO = DVBFE_ALGO_CUSTOM, state=%d\n", __func__, fepriv->state); | |
| if (fepriv->state & FESTATE_RETUNE) { | |
| dev_dbg(fe->dvb->device, "%s: Retune requested, FESTAT_RETUNE\n", __func__); | |
| fepriv->state = FESTATE_TUNED; | |
| } | |
| /* Case where we are going to search for a carrier | |
| * User asked us to retune again for some reason, possibly | |
| * requesting a search with a new set of parameters | |
| */ | |
| if (fepriv->algo_status & DVBFE_ALGO_SEARCH_AGAIN) { | |
| if (fe->ops.search) { | |
| fepriv->algo_status = fe->ops.search(fe); | |
| /* We did do a search as was requested, the flags are | |
| * now unset as well and has the flags wrt to search. | |
| */ | |
| } else { | |
| fepriv->algo_status &= ~DVBFE_ALGO_SEARCH_AGAIN; | |
| } | |
| } | |
| /* Track the carrier if the search was successful */ | |
| if (fepriv->algo_status != DVBFE_ALGO_SEARCH_SUCCESS) { | |
| fepriv->algo_status |= DVBFE_ALGO_SEARCH_AGAIN; | |
| fepriv->delay = HZ / 2; | |
| } | |
| dtv_property_legacy_params_sync(fe, &fepriv->parameters_out); | |
| fe->ops.read_status(fe, &s); | |
| if (s != fepriv->status) { | |
| dvb_frontend_add_event(fe, s); /* update event list */ | |
| fepriv->status = s; | |
| if (!(s & FE_HAS_LOCK)) { | |
| fepriv->delay = HZ / 10; | |
| fepriv->algo_status |= DVBFE_ALGO_SEARCH_AGAIN; | |
| } else { | |
| fepriv->delay = 60 * HZ; | |
| } | |
| } | |
| break; | |
| default: | |
| dev_dbg(fe->dvb->device, "%s: UNDEFINED ALGO !\n", __func__); | |
| break; | |
| } | |
| } else { | |
| dvb_frontend_swzigzag(fe); | |
| } | |
| } | |
| if (dvb_powerdown_on_sleep) { | |
| if (fe->ops.set_voltage) | |
| fe->ops.set_voltage(fe, SEC_VOLTAGE_OFF); | |
| if (fe->ops.tuner_ops.sleep) { | |
| if (fe->ops.i2c_gate_ctrl) | |
| fe->ops.i2c_gate_ctrl(fe, 1); | |
| fe->ops.tuner_ops.sleep(fe); | |
| if (fe->ops.i2c_gate_ctrl) | |
| fe->ops.i2c_gate_ctrl(fe, 0); | |
| } | |
| if (fe->ops.sleep) | |
| fe->ops.sleep(fe); | |
| } | |
| fepriv->thread = NULL; | |
| if (kthread_should_stop()) | |
| fepriv->exit = DVB_FE_DEVICE_REMOVED; | |
| else | |
| fepriv->exit = DVB_FE_NO_EXIT; | |
| mb(); | |
| if (semheld) | |
| up(&fepriv->sem); | |
| dvb_frontend_wakeup(fe); | |
| return 0; | |
| } | |
| static void dvb_frontend_stop(struct dvb_frontend *fe) | |
| { | |
| struct dvb_frontend_private *fepriv = fe->frontend_priv; | |
| dev_dbg(fe->dvb->device, "%s:\n", __func__); | |
| fepriv->exit = DVB_FE_NORMAL_EXIT; | |
| mb(); | |
| if (!fepriv->thread) | |
| return; | |
| kthread_stop(fepriv->thread); | |
| sema_init(&fepriv->sem, 1); | |
| fepriv->state = FESTATE_IDLE; | |
| /* paranoia check in case a signal arrived */ | |
| if (fepriv->thread) | |
| dev_warn(fe->dvb->device, | |
| "dvb_frontend_stop: warning: thread %p won't exit\n", | |
| fepriv->thread); | |
| } | |
| s32 timeval_usec_diff(struct timeval lasttime, struct timeval curtime) | |
| { | |
| return ((curtime.tv_usec < lasttime.tv_usec) ? | |
| 1000000 - lasttime.tv_usec + curtime.tv_usec : | |
| curtime.tv_usec - lasttime.tv_usec); | |
| } | |
| EXPORT_SYMBOL(timeval_usec_diff); | |
| static inline void timeval_usec_add(struct timeval *curtime, u32 add_usec) | |
| { | |
| curtime->tv_usec += add_usec; | |
| if (curtime->tv_usec >= 1000000) { | |
| curtime->tv_usec -= 1000000; | |
| curtime->tv_sec++; | |
| } | |
| } | |
| /* | |
| * Sleep until gettimeofday() > waketime + add_usec | |
| * This needs to be as precise as possible, but as the delay is | |
| * usually between 2ms and 32ms, it is done using a scheduled msleep | |
| * followed by usleep (normally a busy-wait loop) for the remainder | |
| */ | |
| void dvb_frontend_sleep_until(struct timeval *waketime, u32 add_usec) | |
| { | |
| struct timeval lasttime; | |
| s32 delta, newdelta; | |
| timeval_usec_add(waketime, add_usec); | |
| do_gettimeofday(&lasttime); | |
| delta = timeval_usec_diff(lasttime, *waketime); | |
| if (delta > 2500) { | |
| msleep((delta - 1500) / 1000); | |
| do_gettimeofday(&lasttime); | |
| newdelta = timeval_usec_diff(lasttime, *waketime); | |
| delta = (newdelta > delta) ? 0 : newdelta; | |
| } | |
| if (delta > 0) | |
| udelay(delta); | |
| } | |
| EXPORT_SYMBOL(dvb_frontend_sleep_until); | |
| static int dvb_frontend_start(struct dvb_frontend *fe) | |
| { | |
| int ret; | |
| struct dvb_frontend_private *fepriv = fe->frontend_priv; | |
| struct task_struct *fe_thread; | |
| dev_dbg(fe->dvb->device, "%s:\n", __func__); | |
| if (fepriv->thread) { | |
| if (fepriv->exit == DVB_FE_NO_EXIT) | |
| return 0; | |
| else | |
| dvb_frontend_stop (fe); | |
| } | |
| if (signal_pending(current)) | |
| return -EINTR; | |
| if (down_interruptible (&fepriv->sem)) | |
| return -EINTR; | |
| fepriv->state = FESTATE_IDLE; | |
| fepriv->exit = DVB_FE_NO_EXIT; | |
| fepriv->thread = NULL; | |
| mb(); | |
| fe_thread = kthread_run(dvb_frontend_thread, fe, | |
| "kdvb-ad-%i-fe-%i", fe->dvb->num,fe->id); | |
| if (IS_ERR(fe_thread)) { | |
| ret = PTR_ERR(fe_thread); | |
| dev_warn(fe->dvb->device, | |
| "dvb_frontend_start: failed to start kthread (%d)\n", | |
| ret); | |
| up(&fepriv->sem); | |
| return ret; | |
| } | |
| fepriv->thread = fe_thread; | |
| return 0; | |
| } | |
| static void dvb_frontend_get_frequency_limits(struct dvb_frontend *fe, | |
| u32 *freq_min, u32 *freq_max) | |
| { | |
| *freq_min = max(fe->ops.info.frequency_min, fe->ops.tuner_ops.info.frequency_min); | |
| if (fe->ops.info.frequency_max == 0) | |
| *freq_max = fe->ops.tuner_ops.info.frequency_max; | |
| else if (fe->ops.tuner_ops.info.frequency_max == 0) | |
| *freq_max = fe->ops.info.frequency_max; | |
| else | |
| *freq_max = min(fe->ops.info.frequency_max, fe->ops.tuner_ops.info.frequency_max); | |
| if (*freq_min == 0 || *freq_max == 0) | |
| dev_warn(fe->dvb->device, "DVB: adapter %i frontend %u frequency limits undefined - fix the driver\n", | |
| fe->dvb->num, fe->id); | |
| } | |
| static int dvb_frontend_check_parameters(struct dvb_frontend *fe) | |
| { | |
| struct dtv_frontend_properties *c = &fe->dtv_property_cache; | |
| u32 freq_min; | |
| u32 freq_max; | |
| /* range check: frequency */ | |
| dvb_frontend_get_frequency_limits(fe, &freq_min, &freq_max); | |
| if ((freq_min && c->frequency < freq_min) || | |
| (freq_max && c->frequency > freq_max)) { | |
| dev_warn(fe->dvb->device, "DVB: adapter %i frontend %i frequency %u out of range (%u..%u)\n", | |
| fe->dvb->num, fe->id, c->frequency, | |
| freq_min, freq_max); | |
| return -EINVAL; | |
| } | |
| /* range check: symbol rate */ | |
| switch (c->delivery_system) { | |
| case SYS_DVBS: | |
| case SYS_DVBS2: | |
| case SYS_TURBO: | |
| case SYS_DVBC_ANNEX_A: | |
| case SYS_DVBC_ANNEX_C: | |
| if ((fe->ops.info.symbol_rate_min && | |
| c->symbol_rate < fe->ops.info.symbol_rate_min) || | |
| (fe->ops.info.symbol_rate_max && | |
| c->symbol_rate > fe->ops.info.symbol_rate_max)) { | |
| dev_warn(fe->dvb->device, "DVB: adapter %i frontend %i symbol rate %u out of range (%u..%u)\n", | |
| fe->dvb->num, fe->id, c->symbol_rate, | |
| fe->ops.info.symbol_rate_min, | |
| fe->ops.info.symbol_rate_max); | |
| return -EINVAL; | |
| } | |
| default: | |
| break; | |
| } | |
| return 0; | |
| } | |
| static int dvb_frontend_clear_cache(struct dvb_frontend *fe) | |
| { | |
| struct dtv_frontend_properties *c = &fe->dtv_property_cache; | |
| int i; | |
| u32 delsys; | |
| delsys = c->delivery_system; | |
| memset(c, 0, sizeof(struct dtv_frontend_properties)); | |
| c->delivery_system = delsys; | |
| c->state = DTV_CLEAR; | |
| dev_dbg(fe->dvb->device, "%s: Clearing cache for delivery system %d\n", | |
| __func__, c->delivery_system); | |
| c->transmission_mode = TRANSMISSION_MODE_AUTO; | |
| c->bandwidth_hz = 0; /* AUTO */ | |
| c->guard_interval = GUARD_INTERVAL_AUTO; | |
| c->hierarchy = HIERARCHY_AUTO; | |
| c->symbol_rate = 0; | |
| c->code_rate_HP = FEC_AUTO; | |
| c->code_rate_LP = FEC_AUTO; | |
| c->fec_inner = FEC_AUTO; | |
| c->rolloff = ROLLOFF_AUTO; | |
| c->voltage = SEC_VOLTAGE_OFF; | |
| c->sectone = SEC_TONE_OFF; | |
| c->pilot = PILOT_AUTO; | |
| c->isdbt_partial_reception = 0; | |
| c->isdbt_sb_mode = 0; | |
| c->isdbt_sb_subchannel = 0; | |
| c->isdbt_sb_segment_idx = 0; | |
| c->isdbt_sb_segment_count = 0; | |
| c->isdbt_layer_enabled = 0; | |
| for (i = 0; i < 3; i++) { | |
| c->layer[i].fec = FEC_AUTO; | |
| c->layer[i].modulation = QAM_AUTO; | |
| c->layer[i].interleaving = 0; | |
| c->layer[i].segment_count = 0; | |
| } | |
| c->stream_id = NO_STREAM_ID_FILTER; | |
| switch (c->delivery_system) { | |
| case SYS_DVBS: | |
| case SYS_DVBS2: | |
| case SYS_TURBO: | |
| c->modulation = QPSK; /* implied for DVB-S in legacy API */ | |
| c->rolloff = ROLLOFF_35;/* implied for DVB-S */ | |
| break; | |
| case SYS_ATSC: | |
| c->modulation = VSB_8; | |
| break; | |
| default: | |
| c->modulation = QAM_AUTO; | |
| break; | |
| } | |
| c->lna = LNA_AUTO; | |
| return 0; | |
| } | |
| #define _DTV_CMD(n, s, b) \ | |
| [n] = { \ | |
| .name = #n, \ | |
| .cmd = n, \ | |
| .set = s,\ | |
| .buffer = b \ | |
| } | |
| static struct dtv_cmds_h dtv_cmds[DTV_MAX_COMMAND + 1] = { | |
| _DTV_CMD(DTV_TUNE, 1, 0), | |
| _DTV_CMD(DTV_CLEAR, 1, 0), | |
| /* Set */ | |
| _DTV_CMD(DTV_FREQUENCY, 1, 0), | |
| _DTV_CMD(DTV_BANDWIDTH_HZ, 1, 0), | |
| _DTV_CMD(DTV_MODULATION, 1, 0), | |
| _DTV_CMD(DTV_INVERSION, 1, 0), | |
| _DTV_CMD(DTV_DISEQC_MASTER, 1, 1), | |
| _DTV_CMD(DTV_SYMBOL_RATE, 1, 0), | |
| _DTV_CMD(DTV_INNER_FEC, 1, 0), | |
| _DTV_CMD(DTV_VOLTAGE, 1, 0), | |
| _DTV_CMD(DTV_TONE, 1, 0), | |
| _DTV_CMD(DTV_PILOT, 1, 0), | |
| _DTV_CMD(DTV_ROLLOFF, 1, 0), | |
| _DTV_CMD(DTV_DELIVERY_SYSTEM, 1, 0), | |
| _DTV_CMD(DTV_HIERARCHY, 1, 0), | |
| _DTV_CMD(DTV_CODE_RATE_HP, 1, 0), | |
| _DTV_CMD(DTV_CODE_RATE_LP, 1, 0), | |
| _DTV_CMD(DTV_GUARD_INTERVAL, 1, 0), | |
| _DTV_CMD(DTV_TRANSMISSION_MODE, 1, 0), | |
| _DTV_CMD(DTV_INTERLEAVING, 1, 0), | |
| _DTV_CMD(DTV_ISDBT_PARTIAL_RECEPTION, 1, 0), | |
| _DTV_CMD(DTV_ISDBT_SOUND_BROADCASTING, 1, 0), | |
| _DTV_CMD(DTV_ISDBT_SB_SUBCHANNEL_ID, 1, 0), | |
| _DTV_CMD(DTV_ISDBT_SB_SEGMENT_IDX, 1, 0), | |
| _DTV_CMD(DTV_ISDBT_SB_SEGMENT_COUNT, 1, 0), | |
| _DTV_CMD(DTV_ISDBT_LAYER_ENABLED, 1, 0), | |
| _DTV_CMD(DTV_ISDBT_LAYERA_FEC, 1, 0), | |
| _DTV_CMD(DTV_ISDBT_LAYERA_MODULATION, 1, 0), | |
| _DTV_CMD(DTV_ISDBT_LAYERA_SEGMENT_COUNT, 1, 0), | |
| _DTV_CMD(DTV_ISDBT_LAYERA_TIME_INTERLEAVING, 1, 0), | |
| _DTV_CMD(DTV_ISDBT_LAYERB_FEC, 1, 0), | |
| _DTV_CMD(DTV_ISDBT_LAYERB_MODULATION, 1, 0), | |
| _DTV_CMD(DTV_ISDBT_LAYERB_SEGMENT_COUNT, 1, 0), | |
| _DTV_CMD(DTV_ISDBT_LAYERB_TIME_INTERLEAVING, 1, 0), | |
| _DTV_CMD(DTV_ISDBT_LAYERC_FEC, 1, 0), | |
| _DTV_CMD(DTV_ISDBT_LAYERC_MODULATION, 1, 0), | |
| _DTV_CMD(DTV_ISDBT_LAYERC_SEGMENT_COUNT, 1, 0), | |
| _DTV_CMD(DTV_ISDBT_LAYERC_TIME_INTERLEAVING, 1, 0), | |
| _DTV_CMD(DTV_STREAM_ID, 1, 0), | |
| _DTV_CMD(DTV_DVBT2_PLP_ID_LEGACY, 1, 0), | |
| _DTV_CMD(DTV_LNA, 1, 0), | |
| /* Get */ | |
| _DTV_CMD(DTV_DISEQC_SLAVE_REPLY, 0, 1), | |
| _DTV_CMD(DTV_API_VERSION, 0, 0), | |
| _DTV_CMD(DTV_ENUM_DELSYS, 0, 0), | |
| _DTV_CMD(DTV_ATSCMH_PARADE_ID, 1, 0), | |
| _DTV_CMD(DTV_ATSCMH_RS_FRAME_ENSEMBLE, 1, 0), | |
| _DTV_CMD(DTV_ATSCMH_FIC_VER, 0, 0), | |
| _DTV_CMD(DTV_ATSCMH_NOG, 0, 0), | |
| _DTV_CMD(DTV_ATSCMH_TNOG, 0, 0), | |
| _DTV_CMD(DTV_ATSCMH_SGN, 0, 0), | |
| _DTV_CMD(DTV_ATSCMH_PRC, 0, 0), | |
| _DTV_CMD(DTV_ATSCMH_RS_FRAME_MODE, 0, 0), | |
| _DTV_CMD(DTV_ATSCMH_RS_CODE_MODE_PRI, 0, 0), | |
| _DTV_CMD(DTV_ATSCMH_RS_CODE_MODE_SEC, 0, 0), | |
| _DTV_CMD(DTV_ATSCMH_SCCC_BLOCK_MODE, 0, 0), | |
| _DTV_CMD(DTV_ATSCMH_SCCC_CODE_MODE_A, 0, 0), | |
| _DTV_CMD(DTV_ATSCMH_SCCC_CODE_MODE_B, 0, 0), | |
| _DTV_CMD(DTV_ATSCMH_SCCC_CODE_MODE_C, 0, 0), | |
| _DTV_CMD(DTV_ATSCMH_SCCC_CODE_MODE_D, 0, 0), | |
| /* Statistics API */ | |
| _DTV_CMD(DTV_STAT_SIGNAL_STRENGTH, 0, 0), | |
| _DTV_CMD(DTV_STAT_CNR, 0, 0), | |
| _DTV_CMD(DTV_STAT_PRE_ERROR_BIT_COUNT, 0, 0), | |
| _DTV_CMD(DTV_STAT_PRE_TOTAL_BIT_COUNT, 0, 0), | |
| _DTV_CMD(DTV_STAT_POST_ERROR_BIT_COUNT, 0, 0), | |
| _DTV_CMD(DTV_STAT_POST_TOTAL_BIT_COUNT, 0, 0), | |
| _DTV_CMD(DTV_STAT_ERROR_BLOCK_COUNT, 0, 0), | |
| _DTV_CMD(DTV_STAT_TOTAL_BLOCK_COUNT, 0, 0), | |
| }; | |
| static void dtv_property_dump(struct dvb_frontend *fe, struct dtv_property *tvp) | |
| { | |
| int i; | |
| if (tvp->cmd <= 0 || tvp->cmd > DTV_MAX_COMMAND) { | |
| dev_warn(fe->dvb->device, "%s: tvp.cmd = 0x%08x undefined\n", | |
| __func__, tvp->cmd); | |
| return; | |
| } | |
| dev_dbg(fe->dvb->device, "%s: tvp.cmd = 0x%08x (%s)\n", __func__, | |
| tvp->cmd, dtv_cmds[tvp->cmd].name); | |
| if (dtv_cmds[tvp->cmd].buffer) { | |
| dev_dbg(fe->dvb->device, "%s: tvp.u.buffer.len = 0x%02x\n", | |
| __func__, tvp->u.buffer.len); | |
| for(i = 0; i < tvp->u.buffer.len; i++) | |
| dev_dbg(fe->dvb->device, | |
| "%s: tvp.u.buffer.data[0x%02x] = 0x%02x\n", | |
| __func__, i, tvp->u.buffer.data[i]); | |
| } else { | |
| dev_dbg(fe->dvb->device, "%s: tvp.u.data = 0x%08x\n", __func__, | |
| tvp->u.data); | |
| } | |
| } | |
| /* Synchronise the legacy tuning parameters into the cache, so that demodulator | |
| * drivers can use a single set_frontend tuning function, regardless of whether | |
| * it's being used for the legacy or new API, reducing code and complexity. | |
| */ | |
| static int dtv_property_cache_sync(struct dvb_frontend *fe, | |
| struct dtv_frontend_properties *c, | |
| const struct dvb_frontend_parameters *p) | |
| { | |
| c->frequency = p->frequency; | |
| c->inversion = p->inversion; | |
| switch (dvbv3_type(c->delivery_system)) { | |
| case DVBV3_QPSK: | |
| dev_dbg(fe->dvb->device, "%s: Preparing QPSK req\n", __func__); | |
| c->symbol_rate = p->u.qpsk.symbol_rate; | |
| c->fec_inner = p->u.qpsk.fec_inner; | |
| break; | |
| case DVBV3_QAM: | |
| dev_dbg(fe->dvb->device, "%s: Preparing QAM req\n", __func__); | |
| c->symbol_rate = p->u.qam.symbol_rate; | |
| c->fec_inner = p->u.qam.fec_inner; | |
| c->modulation = p->u.qam.modulation; | |
| break; | |
| case DVBV3_OFDM: | |
| dev_dbg(fe->dvb->device, "%s: Preparing OFDM req\n", __func__); | |
| switch (p->u.ofdm.bandwidth) { | |
| case BANDWIDTH_10_MHZ: | |
| c->bandwidth_hz = 10000000; | |
| break; | |
| case BANDWIDTH_8_MHZ: | |
| c->bandwidth_hz = 8000000; | |
| break; | |
| case BANDWIDTH_7_MHZ: | |
| c->bandwidth_hz = 7000000; | |
| break; | |
| case BANDWIDTH_6_MHZ: | |
| c->bandwidth_hz = 6000000; | |
| break; | |
| case BANDWIDTH_5_MHZ: | |
| c->bandwidth_hz = 5000000; | |
| break; | |
| case BANDWIDTH_1_712_MHZ: | |
| c->bandwidth_hz = 1712000; | |
| break; | |
| case BANDWIDTH_AUTO: | |
| c->bandwidth_hz = 0; | |
| } | |
| c->code_rate_HP = p->u.ofdm.code_rate_HP; | |
| c->code_rate_LP = p->u.ofdm.code_rate_LP; | |
| c->modulation = p->u.ofdm.constellation; | |
| c->transmission_mode = p->u.ofdm.transmission_mode; | |
| c->guard_interval = p->u.ofdm.guard_interval; | |
| c->hierarchy = p->u.ofdm.hierarchy_information; | |
| break; | |
| case DVBV3_ATSC: | |
| dev_dbg(fe->dvb->device, "%s: Preparing ATSC req\n", __func__); | |
| c->modulation = p->u.vsb.modulation; | |
| if (c->delivery_system == SYS_ATSCMH) | |
| break; | |
| if ((c->modulation == VSB_8) || (c->modulation == VSB_16)) | |
| c->delivery_system = SYS_ATSC; | |
| else | |
| c->delivery_system = SYS_DVBC_ANNEX_B; | |
| break; | |
| case DVBV3_UNKNOWN: | |
| dev_err(fe->dvb->device, | |
| "%s: doesn't know how to handle a DVBv3 call to delivery system %i\n", | |
| __func__, c->delivery_system); | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| /* Ensure the cached values are set correctly in the frontend | |
| * legacy tuning structures, for the advanced tuning API. | |
| */ | |
| static int dtv_property_legacy_params_sync(struct dvb_frontend *fe, | |
| struct dvb_frontend_parameters *p) | |
| { | |
| const struct dtv_frontend_properties *c = &fe->dtv_property_cache; | |
| p->frequency = c->frequency; | |
| p->inversion = c->inversion; | |
| switch (dvbv3_type(c->delivery_system)) { | |
| case DVBV3_UNKNOWN: | |
| dev_err(fe->dvb->device, | |
| "%s: doesn't know how to handle a DVBv3 call to delivery system %i\n", | |
| __func__, c->delivery_system); | |
| return -EINVAL; | |
| case DVBV3_QPSK: | |
| dev_dbg(fe->dvb->device, "%s: Preparing QPSK req\n", __func__); | |
| p->u.qpsk.symbol_rate = c->symbol_rate; | |
| p->u.qpsk.fec_inner = c->fec_inner; | |
| break; | |
| case DVBV3_QAM: | |
| dev_dbg(fe->dvb->device, "%s: Preparing QAM req\n", __func__); | |
| p->u.qam.symbol_rate = c->symbol_rate; | |
| p->u.qam.fec_inner = c->fec_inner; | |
| p->u.qam.modulation = c->modulation; | |
| break; | |
| case DVBV3_OFDM: | |
| dev_dbg(fe->dvb->device, "%s: Preparing OFDM req\n", __func__); | |
| switch (c->bandwidth_hz) { | |
| case 10000000: | |
| p->u.ofdm.bandwidth = BANDWIDTH_10_MHZ; | |
| break; | |
| case 8000000: | |
| p->u.ofdm.bandwidth = BANDWIDTH_8_MHZ; | |
| break; | |
| case 7000000: | |
| p->u.ofdm.bandwidth = BANDWIDTH_7_MHZ; | |
| break; | |
| case 6000000: | |
| p->u.ofdm.bandwidth = BANDWIDTH_6_MHZ; | |
| break; | |
| case 5000000: | |
| p->u.ofdm.bandwidth = BANDWIDTH_5_MHZ; | |
| break; | |
| case 1712000: | |
| p->u.ofdm.bandwidth = BANDWIDTH_1_712_MHZ; | |
| break; | |
| case 0: | |
| default: | |
| p->u.ofdm.bandwidth = BANDWIDTH_AUTO; | |
| } | |
| p->u.ofdm.code_rate_HP = c->code_rate_HP; | |
| p->u.ofdm.code_rate_LP = c->code_rate_LP; | |
| p->u.ofdm.constellation = c->modulation; | |
| p->u.ofdm.transmission_mode = c->transmission_mode; | |
| p->u.ofdm.guard_interval = c->guard_interval; | |
| p->u.ofdm.hierarchy_information = c->hierarchy; | |
| break; | |
| case DVBV3_ATSC: | |
| dev_dbg(fe->dvb->device, "%s: Preparing VSB req\n", __func__); | |
| p->u.vsb.modulation = c->modulation; | |
| break; | |
| } | |
| return 0; | |
| } | |
| /** | |
| * dtv_get_frontend - calls a callback for retrieving DTV parameters | |
| * @fe: struct dvb_frontend pointer | |
| * @c: struct dtv_frontend_properties pointer (DVBv5 cache) | |
| * @p_out struct dvb_frontend_parameters pointer (DVBv3 FE struct) | |
| * | |
| * This routine calls either the DVBv3 or DVBv5 get_frontend call. | |
| * If c is not null, it will update the DVBv5 cache struct pointed by it. | |
| * If p_out is not null, it will update the DVBv3 params pointed by it. | |
| */ | |
| static int dtv_get_frontend(struct dvb_frontend *fe, | |
| struct dvb_frontend_parameters *p_out) | |
| { | |
| int r; | |
| if (fe->ops.get_frontend) { | |
| r = fe->ops.get_frontend(fe); | |
| if (unlikely(r < 0)) | |
| return r; | |
| if (p_out) | |
| dtv_property_legacy_params_sync(fe, p_out); | |
| return 0; | |
| } | |
| /* As everything is in cache, get_frontend fops are always supported */ | |
| return 0; | |
| } | |
| static int dvb_frontend_ioctl_legacy(struct file *file, | |
| unsigned int cmd, void *parg); | |
| static int dvb_frontend_ioctl_properties(struct file *file, | |
| unsigned int cmd, void *parg); | |
| static int dtv_property_process_get(struct dvb_frontend *fe, | |
| const struct dtv_frontend_properties *c, | |
| struct dtv_property *tvp, | |
| struct file *file) | |
| { | |
| int r, ncaps; | |
| switch(tvp->cmd) { | |
| case DTV_ENUM_DELSYS: | |
| ncaps = 0; | |
| while (fe->ops.delsys[ncaps] && ncaps < MAX_DELSYS) { | |
| tvp->u.buffer.data[ncaps] = fe->ops.delsys[ncaps]; | |
| ncaps++; | |
| } | |
| tvp->u.buffer.len = ncaps; | |
| break; | |
| case DTV_FREQUENCY: | |
| tvp->u.data = c->frequency; | |
| break; | |
| case DTV_MODULATION: | |
| tvp->u.data = c->modulation; | |
| break; | |
| case DTV_BANDWIDTH_HZ: | |
| tvp->u.data = c->bandwidth_hz; | |
| break; | |
| case DTV_INVERSION: | |
| tvp->u.data = c->inversion; | |
| break; | |
| case DTV_SYMBOL_RATE: | |
| tvp->u.data = c->symbol_rate; | |
| break; | |
| case DTV_INNER_FEC: | |
| tvp->u.data = c->fec_inner; | |
| break; | |
| case DTV_PILOT: | |
| tvp->u.data = c->pilot; | |
| break; | |
| case DTV_ROLLOFF: | |
| tvp->u.data = c->rolloff; | |
| break; | |
| case DTV_DELIVERY_SYSTEM: | |
| tvp->u.data = c->delivery_system; | |
| break; | |
| case DTV_VOLTAGE: | |
| tvp->u.data = c->voltage; | |
| break; | |
| case DTV_TONE: | |
| tvp->u.data = c->sectone; | |
| break; | |
| case DTV_API_VERSION: | |
| tvp->u.data = (DVB_API_VERSION << 8) | DVB_API_VERSION_MINOR; | |
| break; | |
| case DTV_CODE_RATE_HP: | |
| tvp->u.data = c->code_rate_HP; | |
| break; | |
| case DTV_CODE_RATE_LP: | |
| tvp->u.data = c->code_rate_LP; | |
| break; | |
| case DTV_GUARD_INTERVAL: | |
| tvp->u.data = c->guard_interval; | |
| break; | |
| case DTV_TRANSMISSION_MODE: | |
| tvp->u.data = c->transmission_mode; | |
| break; | |
| case DTV_HIERARCHY: | |
| tvp->u.data = c->hierarchy; | |
| break; | |
| case DTV_INTERLEAVING: | |
| tvp->u.data = c->interleaving; | |
| break; | |
| /* ISDB-T Support here */ | |
| case DTV_ISDBT_PARTIAL_RECEPTION: | |
| tvp->u.data = c->isdbt_partial_reception; | |
| break; | |
| case DTV_ISDBT_SOUND_BROADCASTING: | |
| tvp->u.data = c->isdbt_sb_mode; | |
| break; | |
| case DTV_ISDBT_SB_SUBCHANNEL_ID: | |
| tvp->u.data = c->isdbt_sb_subchannel; | |
| break; | |
| case DTV_ISDBT_SB_SEGMENT_IDX: | |
| tvp->u.data = c->isdbt_sb_segment_idx; | |
| break; | |
| case DTV_ISDBT_SB_SEGMENT_COUNT: | |
| tvp->u.data = c->isdbt_sb_segment_count; | |
| break; | |
| case DTV_ISDBT_LAYER_ENABLED: | |
| tvp->u.data = c->isdbt_layer_enabled; | |
| break; | |
| case DTV_ISDBT_LAYERA_FEC: | |
| tvp->u.data = c->layer[0].fec; | |
| break; | |
| case DTV_ISDBT_LAYERA_MODULATION: | |
| tvp->u.data = c->layer[0].modulation; | |
| break; | |
| case DTV_ISDBT_LAYERA_SEGMENT_COUNT: | |
| tvp->u.data = c->layer[0].segment_count; | |
| break; | |
| case DTV_ISDBT_LAYERA_TIME_INTERLEAVING: | |
| tvp->u.data = c->layer[0].interleaving; | |
| break; | |
| case DTV_ISDBT_LAYERB_FEC: | |
| tvp->u.data = c->layer[1].fec; | |
| break; | |
| case DTV_ISDBT_LAYERB_MODULATION: | |
| tvp->u.data = c->layer[1].modulation; | |
| break; | |
| case DTV_ISDBT_LAYERB_SEGMENT_COUNT: | |
| tvp->u.data = c->layer[1].segment_count; | |
| break; | |
| case DTV_ISDBT_LAYERB_TIME_INTERLEAVING: | |
| tvp->u.data = c->layer[1].interleaving; | |
| break; | |
| case DTV_ISDBT_LAYERC_FEC: | |
| tvp->u.data = c->layer[2].fec; | |
| break; | |
| case DTV_ISDBT_LAYERC_MODULATION: | |
| tvp->u.data = c->layer[2].modulation; | |
| break; | |
| case DTV_ISDBT_LAYERC_SEGMENT_COUNT: | |
| tvp->u.data = c->layer[2].segment_count; | |
| break; | |
| case DTV_ISDBT_LAYERC_TIME_INTERLEAVING: | |
| tvp->u.data = c->layer[2].interleaving; | |
| break; | |
| /* Multistream support */ | |
| case DTV_STREAM_ID: | |
| case DTV_DVBT2_PLP_ID_LEGACY: | |
| tvp->u.data = c->stream_id; | |
| break; | |
| /* ATSC-MH */ | |
| case DTV_ATSCMH_FIC_VER: | |
| tvp->u.data = fe->dtv_property_cache.atscmh_fic_ver; | |
| break; | |
| case DTV_ATSCMH_PARADE_ID: | |
| tvp->u.data = fe->dtv_property_cache.atscmh_parade_id; | |
| break; | |
| case DTV_ATSCMH_NOG: | |
| tvp->u.data = fe->dtv_property_cache.atscmh_nog; | |
| break; | |
| case DTV_ATSCMH_TNOG: | |
| tvp->u.data = fe->dtv_property_cache.atscmh_tnog; | |
| break; | |
| case DTV_ATSCMH_SGN: | |
| tvp->u.data = fe->dtv_property_cache.atscmh_sgn; | |
| break; | |
| case DTV_ATSCMH_PRC: | |
| tvp->u.data = fe->dtv_property_cache.atscmh_prc; | |
| break; | |
| case DTV_ATSCMH_RS_FRAME_MODE: | |
| tvp->u.data = fe->dtv_property_cache.atscmh_rs_frame_mode; | |
| break; | |
| case DTV_ATSCMH_RS_FRAME_ENSEMBLE: | |
| tvp->u.data = fe->dtv_property_cache.atscmh_rs_frame_ensemble; | |
| break; | |
| case DTV_ATSCMH_RS_CODE_MODE_PRI: | |
| tvp->u.data = fe->dtv_property_cache.atscmh_rs_code_mode_pri; | |
| break; | |
| case DTV_ATSCMH_RS_CODE_MODE_SEC: | |
| tvp->u.data = fe->dtv_property_cache.atscmh_rs_code_mode_sec; | |
| break; | |
| case DTV_ATSCMH_SCCC_BLOCK_MODE: | |
| tvp->u.data = fe->dtv_property_cache.atscmh_sccc_block_mode; | |
| break; | |
| case DTV_ATSCMH_SCCC_CODE_MODE_A: | |
| tvp->u.data = fe->dtv_property_cache.atscmh_sccc_code_mode_a; | |
| break; | |
| case DTV_ATSCMH_SCCC_CODE_MODE_B: | |
| tvp->u.data = fe->dtv_property_cache.atscmh_sccc_code_mode_b; | |
| break; | |
| case DTV_ATSCMH_SCCC_CODE_MODE_C: | |
| tvp->u.data = fe->dtv_property_cache.atscmh_sccc_code_mode_c; | |
| break; | |
| case DTV_ATSCMH_SCCC_CODE_MODE_D: | |
| tvp->u.data = fe->dtv_property_cache.atscmh_sccc_code_mode_d; | |
| break; | |
| case DTV_LNA: | |
| tvp->u.data = c->lna; | |
| break; | |
| /* Fill quality measures */ | |
| case DTV_STAT_SIGNAL_STRENGTH: | |
| tvp->u.st = c->strength; | |
| break; | |
| case DTV_STAT_CNR: | |
| tvp->u.st = c->cnr; | |
| break; | |
| case DTV_STAT_PRE_ERROR_BIT_COUNT: | |
| tvp->u.st = c->pre_bit_error; | |
| break; | |
| case DTV_STAT_PRE_TOTAL_BIT_COUNT: | |
| tvp->u.st = c->pre_bit_count; | |
| break; | |
| case DTV_STAT_POST_ERROR_BIT_COUNT: | |
| tvp->u.st = c->post_bit_error; | |
| break; | |
| case DTV_STAT_POST_TOTAL_BIT_COUNT: | |
| tvp->u.st = c->post_bit_count; | |
| break; | |
| case DTV_STAT_ERROR_BLOCK_COUNT: | |
| tvp->u.st = c->block_error; | |
| break; | |
| case DTV_STAT_TOTAL_BLOCK_COUNT: | |
| tvp->u.st = c->block_count; | |
| break; | |
| default: | |
| dev_dbg(fe->dvb->device, | |
| "%s: FE property %d doesn't exist\n", | |
| __func__, tvp->cmd); | |
| return -EINVAL; | |
| } | |
| /* Allow the frontend to override outgoing properties */ | |
| if (fe->ops.get_property) { | |
| r = fe->ops.get_property(fe, tvp); | |
| if (r < 0) | |
| return r; | |
| } | |
| dtv_property_dump(fe, tvp); | |
| return 0; | |
| } | |
| static int dtv_set_frontend(struct dvb_frontend *fe); | |
| static bool is_dvbv3_delsys(u32 delsys) | |
| { | |
| bool status; | |
| status = (delsys == SYS_DVBT) || (delsys == SYS_DVBC_ANNEX_A) || | |
| (delsys == SYS_DVBS) || (delsys == SYS_ATSC); | |
| return status; | |
| } | |
| static int set_delivery_system(struct dvb_frontend *fe, u32 desired_system) | |
| { | |
| int ncaps, i; | |
| u32 delsys = SYS_UNDEFINED; | |
| struct dtv_frontend_properties *c = &fe->dtv_property_cache; | |
| enum dvbv3_emulation_type type; | |
| /* | |
| * It was reported that some old DVBv5 applications were | |
| * filling delivery_system with SYS_UNDEFINED. If this happens, | |
| * assume that the application wants to use the first supported | |
| * delivery system. | |
| */ | |
| if (c->delivery_system == SYS_UNDEFINED) | |
| c->delivery_system = fe->ops.delsys[0]; | |
| if (desired_system == SYS_UNDEFINED) { | |
| /* | |
| * A DVBv3 call doesn't know what's the desired system. | |
| * Also, DVBv3 applications don't know that ops.info->type | |
| * could be changed, and they simply dies when it doesn't | |
| * match. | |
| * So, don't change the current delivery system, as it | |
| * may be trying to do the wrong thing, like setting an | |
| * ISDB-T frontend as DVB-T. Instead, find the closest | |
| * DVBv3 system that matches the delivery system. | |
| */ | |
| if (is_dvbv3_delsys(c->delivery_system)) { | |
| dev_dbg(fe->dvb->device, | |
| "%s: Using delivery system to %d\n", | |
| __func__, c->delivery_system); | |
| return 0; | |
| } | |
| type = dvbv3_type(c->delivery_system); | |
| switch (type) { | |
| case DVBV3_QPSK: | |
| desired_system = SYS_DVBS; | |
| break; | |
| case DVBV3_QAM: | |
| desired_system = SYS_DVBC_ANNEX_A; | |
| break; | |
| case DVBV3_ATSC: | |
| desired_system = SYS_ATSC; | |
| break; | |
| case DVBV3_OFDM: | |
| desired_system = SYS_DVBT; | |
| break; | |
| default: | |
| dev_dbg(fe->dvb->device, "%s: This frontend doesn't support DVBv3 calls\n", | |
| __func__); | |
| return -EINVAL; | |
| } | |
| /* | |
| * Get a delivery system that is compatible with DVBv3 | |
| * NOTE: in order for this to work with softwares like Kaffeine that | |
| * uses a DVBv5 call for DVB-S2 and a DVBv3 call to go back to | |
| * DVB-S, drivers that support both should put the SYS_DVBS entry | |
| * before the SYS_DVBS2, otherwise it won't switch back to DVB-S. | |
| * The real fix is that userspace applications should not use DVBv3 | |
| * and not trust on calling FE_SET_FRONTEND to switch the delivery | |
| * system. | |
| */ | |
| ncaps = 0; | |
| while (fe->ops.delsys[ncaps] && ncaps < MAX_DELSYS) { | |
| if (fe->ops.delsys[ncaps] == desired_system) { | |
| delsys = desired_system; | |
| break; | |
| } | |
| ncaps++; | |
| } | |
| if (delsys == SYS_UNDEFINED) { | |
| dev_dbg(fe->dvb->device, "%s: Couldn't find a delivery system that matches %d\n", | |
| __func__, desired_system); | |
| } | |
| } else { | |
| /* | |
| * This is a DVBv5 call. So, it likely knows the supported | |
| * delivery systems. | |
| */ | |
| /* Check if the desired delivery system is supported */ | |
| ncaps = 0; | |
| while (fe->ops.delsys[ncaps] && ncaps < MAX_DELSYS) { | |
| if (fe->ops.delsys[ncaps] == desired_system) { | |
| c->delivery_system = desired_system; | |
| dev_dbg(fe->dvb->device, | |
| "%s: Changing delivery system to %d\n", | |
| __func__, desired_system); | |
| return 0; | |
| } | |
| ncaps++; | |
| } | |
| type = dvbv3_type(desired_system); | |
| /* | |
| * The delivery system is not supported. See if it can be | |
| * emulated. | |
| * The emulation only works if the desired system is one of the | |
| * DVBv3 delivery systems | |
| */ | |
| if (!is_dvbv3_delsys(desired_system)) { | |
| dev_dbg(fe->dvb->device, | |
| "%s: can't use a DVBv3 FE_SET_FRONTEND call on this frontend\n", | |
| __func__); | |
| return -EINVAL; | |
| } | |
| /* | |
| * Get the last non-DVBv3 delivery system that has the same type | |
| * of the desired system | |
| */ | |
| ncaps = 0; | |
| while (fe->ops.delsys[ncaps] && ncaps < MAX_DELSYS) { | |
| if ((dvbv3_type(fe->ops.delsys[ncaps]) == type) && | |
| !is_dvbv3_delsys(fe->ops.delsys[ncaps])) | |
| delsys = fe->ops.delsys[ncaps]; | |
| ncaps++; | |
| } | |
| /* There's nothing compatible with the desired delivery system */ | |
| if (delsys == SYS_UNDEFINED) { | |
| dev_dbg(fe->dvb->device, | |
| "%s: Incompatible DVBv3 FE_SET_FRONTEND call for this frontend\n", | |
| __func__); | |
| return -EINVAL; | |
| } | |
| } | |
| c->delivery_system = delsys; | |
| /* | |
| * The DVBv3 or DVBv5 call is requesting a different system. So, | |
| * emulation is needed. | |
| * | |
| * Emulate newer delivery systems like ISDBT, DVBT and DTMB | |
| * for older DVBv5 applications. The emulation will try to use | |
| * the auto mode for most things, and will assume that the desired | |
| * delivery system is the last one at the ops.delsys[] array | |
| */ | |
| dev_dbg(fe->dvb->device, | |
| "%s: Using delivery system %d emulated as if it were a %d\n", | |
| __func__, delsys, desired_system); | |
| /* | |
| * For now, handles ISDB-T calls. More code may be needed here for the | |
| * other emulated stuff | |
| */ | |
| if (type == DVBV3_OFDM) { | |
| if (c->delivery_system == SYS_ISDBT) { | |
| dev_dbg(fe->dvb->device, | |
| "%s: Using defaults for SYS_ISDBT\n", | |
| __func__); | |
| if (!c->bandwidth_hz) | |
| c->bandwidth_hz = 6000000; | |
| c->isdbt_partial_reception = 0; | |
| c->isdbt_sb_mode = 0; | |
| c->isdbt_sb_subchannel = 0; | |
| c->isdbt_sb_segment_idx = 0; | |
| c->isdbt_sb_segment_count = 0; | |
| c->isdbt_layer_enabled = 0; | |
| for (i = 0; i < 3; i++) { | |
| c->layer[i].fec = FEC_AUTO; | |
| c->layer[i].modulation = QAM_AUTO; | |
| c->layer[i].interleaving = 0; | |
| c->layer[i].segment_count = 0; | |
| } | |
| } | |
| } | |
| dev_dbg(fe->dvb->device, "%s: change delivery system on cache to %d\n", | |
| __func__, c->delivery_system); | |
| return 0; | |
| } | |
| static int dtv_property_process_set(struct dvb_frontend *fe, | |
| struct dtv_property *tvp, | |
| struct file *file) | |
| { | |
| int r = 0; | |
| struct dtv_frontend_properties *c = &fe->dtv_property_cache; | |
| /* Allow the frontend to validate incoming properties */ | |
| if (fe->ops.set_property) { | |
| r = fe->ops.set_property(fe, tvp); | |
| if (r < 0) | |
| return r; | |
| } | |
| switch(tvp->cmd) { | |
| case DTV_CLEAR: | |
| /* | |
| * Reset a cache of data specific to the frontend here. This does | |
| * not effect hardware. | |
| */ | |
| dvb_frontend_clear_cache(fe); | |
| break; | |
| case DTV_TUNE: | |
| /* interpret the cache of data, build either a traditional frontend | |
| * tunerequest so we can pass validation in the FE_SET_FRONTEND | |
| * ioctl. | |
| */ | |
| c->state = tvp->cmd; | |
| dev_dbg(fe->dvb->device, "%s: Finalised property cache\n", | |
| __func__); | |
| r = dtv_set_frontend(fe); | |
| break; | |
| case DTV_FREQUENCY: | |
| c->frequency = tvp->u.data; | |
| break; | |
| case DTV_MODULATION: | |
| c->modulation = tvp->u.data; | |
| break; | |
| case DTV_BANDWIDTH_HZ: | |
| c->bandwidth_hz = tvp->u.data; | |
| break; | |
| case DTV_INVERSION: | |
| c->inversion = tvp->u.data; | |
| break; | |
| case DTV_SYMBOL_RATE: | |
| c->symbol_rate = tvp->u.data; | |
| break; | |
| case DTV_INNER_FEC: | |
| c->fec_inner = tvp->u.data; | |
| break; | |
| case DTV_PILOT: | |
| c->pilot = tvp->u.data; | |
| break; | |
| case DTV_ROLLOFF: | |
| c->rolloff = tvp->u.data; | |
| break; | |
| case DTV_DELIVERY_SYSTEM: | |
| r = set_delivery_system(fe, tvp->u.data); | |
| break; | |
| case DTV_VOLTAGE: | |
| c->voltage = tvp->u.data; | |
| r = dvb_frontend_ioctl_legacy(file, FE_SET_VOLTAGE, | |
| (void *)c->voltage); | |
| break; | |
| case DTV_TONE: | |
| c->sectone = tvp->u.data; | |
| r = dvb_frontend_ioctl_legacy(file, FE_SET_TONE, | |
| (void *)c->sectone); | |
| break; | |
| case DTV_CODE_RATE_HP: | |
| c->code_rate_HP = tvp->u.data; | |
| break; | |
| case DTV_CODE_RATE_LP: | |
| c->code_rate_LP = tvp->u.data; | |
| break; | |
| case DTV_GUARD_INTERVAL: | |
| c->guard_interval = tvp->u.data; | |
| break; | |
| case DTV_TRANSMISSION_MODE: | |
| c->transmission_mode = tvp->u.data; | |
| break; | |
| case DTV_HIERARCHY: | |
| c->hierarchy = tvp->u.data; | |
| break; | |
| case DTV_INTERLEAVING: | |
| c->interleaving = tvp->u.data; | |
| break; | |
| /* ISDB-T Support here */ | |
| case DTV_ISDBT_PARTIAL_RECEPTION: | |
| c->isdbt_partial_reception = tvp->u.data; | |
| break; | |
| case DTV_ISDBT_SOUND_BROADCASTING: | |
| c->isdbt_sb_mode = tvp->u.data; | |
| break; | |
| case DTV_ISDBT_SB_SUBCHANNEL_ID: | |
| c->isdbt_sb_subchannel = tvp->u.data; | |
| break; | |
| case DTV_ISDBT_SB_SEGMENT_IDX: | |
| c->isdbt_sb_segment_idx = tvp->u.data; | |
| break; | |
| case DTV_ISDBT_SB_SEGMENT_COUNT: | |
| c->isdbt_sb_segment_count = tvp->u.data; | |
| break; | |
| case DTV_ISDBT_LAYER_ENABLED: | |
| c->isdbt_layer_enabled = tvp->u.data; | |
| break; | |
| case DTV_ISDBT_LAYERA_FEC: | |
| c->layer[0].fec = tvp->u.data; | |
| break; | |
| case DTV_ISDBT_LAYERA_MODULATION: | |
| c->layer[0].modulation = tvp->u.data; | |
| break; | |
| case DTV_ISDBT_LAYERA_SEGMENT_COUNT: | |
| c->layer[0].segment_count = tvp->u.data; | |
| break; | |
| case DTV_ISDBT_LAYERA_TIME_INTERLEAVING: | |
| c->layer[0].interleaving = tvp->u.data; | |
| break; | |
| case DTV_ISDBT_LAYERB_FEC: | |
| c->layer[1].fec = tvp->u.data; | |
| break; | |
| case DTV_ISDBT_LAYERB_MODULATION: | |
| c->layer[1].modulation = tvp->u.data; | |
| break; | |
| case DTV_ISDBT_LAYERB_SEGMENT_COUNT: | |
| c->layer[1].segment_count = tvp->u.data; | |
| break; | |
| case DTV_ISDBT_LAYERB_TIME_INTERLEAVING: | |
| c->layer[1].interleaving = tvp->u.data; | |
| break; | |
| case DTV_ISDBT_LAYERC_FEC: | |
| c->layer[2].fec = tvp->u.data; | |
| break; | |
| case DTV_ISDBT_LAYERC_MODULATION: | |
| c->layer[2].modulation = tvp->u.data; | |
| break; | |
| case DTV_ISDBT_LAYERC_SEGMENT_COUNT: | |
| c->layer[2].segment_count = tvp->u.data; | |
| break; | |
| case DTV_ISDBT_LAYERC_TIME_INTERLEAVING: | |
| c->layer[2].interleaving = tvp->u.data; | |
| break; | |
| /* Multistream support */ | |
| case DTV_STREAM_ID: | |
| case DTV_DVBT2_PLP_ID_LEGACY: | |
| c->stream_id = tvp->u.data; | |
| break; | |
| /* ATSC-MH */ | |
| case DTV_ATSCMH_PARADE_ID: | |
| fe->dtv_property_cache.atscmh_parade_id = tvp->u.data; | |
| break; | |
| case DTV_ATSCMH_RS_FRAME_ENSEMBLE: | |
| fe->dtv_property_cache.atscmh_rs_frame_ensemble = tvp->u.data; | |
| break; | |
| case DTV_LNA: | |
| c->lna = tvp->u.data; | |
| if (fe->ops.set_lna) | |
| r = fe->ops.set_lna(fe); | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| return r; | |
| } | |
| static int dvb_frontend_ioctl(struct file *file, | |
| unsigned int cmd, void *parg) | |
| { | |
| struct dvb_device *dvbdev = file->private_data; | |
| struct dvb_frontend *fe = dvbdev->priv; | |
| struct dtv_frontend_properties *c = &fe->dtv_property_cache; | |
| struct dvb_frontend_private *fepriv = fe->frontend_priv; | |
| int err = -EOPNOTSUPP; | |
| dev_dbg(fe->dvb->device, "%s: (%d)\n", __func__, _IOC_NR(cmd)); | |
| if (down_interruptible(&fepriv->sem)) | |
| return -ERESTARTSYS; | |
| if (fepriv->exit != DVB_FE_NO_EXIT) { | |
| up(&fepriv->sem); | |
| return -ENODEV; | |
| } | |
| if ((file->f_flags & O_ACCMODE) == O_RDONLY && | |
| (_IOC_DIR(cmd) != _IOC_READ || cmd == FE_GET_EVENT || | |
| cmd == FE_DISEQC_RECV_SLAVE_REPLY)) { | |
| up(&fepriv->sem); | |
| return -EPERM; | |
| } | |
| if ((cmd == FE_SET_PROPERTY) || (cmd == FE_GET_PROPERTY)) | |
| err = dvb_frontend_ioctl_properties(file, cmd, parg); | |
| else { | |
| c->state = DTV_UNDEFINED; | |
| err = dvb_frontend_ioctl_legacy(file, cmd, parg); | |
| } | |
| up(&fepriv->sem); | |
| return err; | |
| } | |
| static int dvb_frontend_ioctl_properties(struct file *file, | |
| unsigned int cmd, void *parg) | |
| { | |
| struct dvb_device *dvbdev = file->private_data; | |
| struct dvb_frontend *fe = dvbdev->priv; | |
| struct dvb_frontend_private *fepriv = fe->frontend_priv; | |
| struct dtv_frontend_properties *c = &fe->dtv_property_cache; | |
| int err = 0; | |
| struct dtv_properties *tvps = NULL; | |
| struct dtv_property *tvp = NULL; | |
| int i; | |
| dev_dbg(fe->dvb->device, "%s:\n", __func__); | |
| if(cmd == FE_SET_PROPERTY) { | |
| tvps = (struct dtv_properties __user *)parg; | |
| dev_dbg(fe->dvb->device, "%s: properties.num = %d\n", __func__, tvps->num); | |
| dev_dbg(fe->dvb->device, "%s: properties.props = %p\n", __func__, tvps->props); | |
| /* Put an arbitrary limit on the number of messages that can | |
| * be sent at once */ | |
| if ((tvps->num == 0) || (tvps->num > DTV_IOCTL_MAX_MSGS)) | |
| return -EINVAL; | |
| tvp = kmalloc(tvps->num * sizeof(struct dtv_property), GFP_KERNEL); | |
| if (!tvp) { | |
| err = -ENOMEM; | |
| goto out; | |
| } | |
| if (copy_from_user(tvp, tvps->props, tvps->num * sizeof(struct dtv_property))) { | |
| err = -EFAULT; | |
| goto out; | |
| } | |
| for (i = 0; i < tvps->num; i++) { | |
| err = dtv_property_process_set(fe, tvp + i, file); | |
| if (err < 0) | |
| goto out; | |
| (tvp + i)->result = err; | |
| } | |
| if (c->state == DTV_TUNE) | |
| dev_dbg(fe->dvb->device, "%s: Property cache is full, tuning\n", __func__); | |
| } else | |
| if(cmd == FE_GET_PROPERTY) { | |
| tvps = (struct dtv_properties __user *)parg; | |
| dev_dbg(fe->dvb->device, "%s: properties.num = %d\n", __func__, tvps->num); | |
| dev_dbg(fe->dvb->device, "%s: properties.props = %p\n", __func__, tvps->props); | |
| /* Put an arbitrary limit on the number of messages that can | |
| * be sent at once */ | |
| if ((tvps->num == 0) || (tvps->num > DTV_IOCTL_MAX_MSGS)) | |
| return -EINVAL; | |
| tvp = kmalloc(tvps->num * sizeof(struct dtv_property), GFP_KERNEL); | |
| if (!tvp) { | |
| err = -ENOMEM; | |
| goto out; | |
| } | |
| if (copy_from_user(tvp, tvps->props, tvps->num * sizeof(struct dtv_property))) { | |
| err = -EFAULT; | |
| goto out; | |
| } | |
| /* | |
| * Fills the cache out struct with the cache contents, plus | |
| * the data retrieved from get_frontend, if the frontend | |
| * is not idle. Otherwise, returns the cached content | |
| */ | |
| if (fepriv->state != FESTATE_IDLE) { | |
| err = dtv_get_frontend(fe, NULL); | |
| if (err < 0) | |
| goto out; | |
| } | |
| for (i = 0; i < tvps->num; i++) { | |
| err = dtv_property_process_get(fe, c, tvp + i, file); | |
| if (err < 0) | |
| goto out; | |
| (tvp + i)->result = err; | |
| } | |
| if (copy_to_user(tvps->props, tvp, tvps->num * sizeof(struct dtv_property))) { | |
| err = -EFAULT; | |
| goto out; | |
| } | |
| } else | |
| err = -EOPNOTSUPP; | |
| out: | |
| kfree(tvp); | |
| return err; | |
| } | |
| static int dtv_set_frontend(struct dvb_frontend *fe) | |
| { | |
| struct dvb_frontend_private *fepriv = fe->frontend_priv; | |
| struct dtv_frontend_properties *c = &fe->dtv_property_cache; | |
| struct dvb_frontend_tune_settings fetunesettings; | |
| u32 rolloff = 0; | |
| if (dvb_frontend_check_parameters(fe) < 0) | |
| return -EINVAL; | |
| /* | |
| * Initialize output parameters to match the values given by | |
| * the user. FE_SET_FRONTEND triggers an initial frontend event | |
| * with status = 0, which copies output parameters to userspace. | |
| */ | |
| dtv_property_legacy_params_sync(fe, &fepriv->parameters_out); | |
| /* | |
| * Be sure that the bandwidth will be filled for all | |
| * non-satellite systems, as tuners need to know what | |
| * low pass/Nyquist half filter should be applied, in | |
| * order to avoid inter-channel noise. | |
| * | |
| * ISDB-T and DVB-T/T2 already sets bandwidth. | |
| * ATSC and DVB-C don't set, so, the core should fill it. | |
| * | |
| * On DVB-C Annex A and C, the bandwidth is a function of | |
| * the roll-off and symbol rate. Annex B defines different | |
| * roll-off factors depending on the modulation. Fortunately, | |
| * Annex B is only used with 6MHz, so there's no need to | |
| * calculate it. | |
| * | |
| * While not officially supported, a side effect of handling it at | |
| * the cache level is that a program could retrieve the bandwidth | |
| * via DTV_BANDWIDTH_HZ, which may be useful for test programs. | |
| */ | |
| switch (c->delivery_system) { | |
| case SYS_ATSC: | |
| case SYS_DVBC_ANNEX_B: | |
| c->bandwidth_hz = 6000000; | |
| break; | |
| case SYS_DVBC_ANNEX_A: | |
| rolloff = 115; | |
| break; | |
| case SYS_DVBC_ANNEX_C: | |
| rolloff = 113; | |
| break; | |
| default: | |
| break; | |
| } | |
| if (rolloff) | |
| c->bandwidth_hz = (c->symbol_rate * rolloff) / 100; | |
| /* force auto frequency inversion if requested */ | |
| if (dvb_force_auto_inversion) | |
| c->inversion = INVERSION_AUTO; | |
| /* | |
| * without hierarchical coding code_rate_LP is irrelevant, | |
| * so we tolerate the otherwise invalid FEC_NONE setting | |
| */ | |
| if (c->hierarchy == HIERARCHY_NONE && c->code_rate_LP == FEC_NONE) | |
| c->code_rate_LP = FEC_AUTO; | |
| /* get frontend-specific tuning settings */ | |
| memset(&fetunesettings, 0, sizeof(struct dvb_frontend_tune_settings)); | |
| if (fe->ops.get_tune_settings && (fe->ops.get_tune_settings(fe, &fetunesettings) == 0)) { | |
| fepriv->min_delay = (fetunesettings.min_delay_ms * HZ) / 1000; | |
| fepriv->max_drift = fetunesettings.max_drift; | |
| fepriv->step_size = fetunesettings.step_size; | |
| } else { | |
| /* default values */ | |
| switch (c->delivery_system) { | |
| case SYS_DVBS: | |
| case SYS_DVBS2: | |
| case SYS_ISDBS: | |
| case SYS_TURBO: | |
| case SYS_DVBC_ANNEX_A: | |
| case SYS_DVBC_ANNEX_C: | |
| fepriv->min_delay = HZ / 20; | |
| fepriv->step_size = c->symbol_rate / 16000; | |
| fepriv->max_drift = c->symbol_rate / 2000; | |
| break; | |
| case SYS_DVBT: | |
| case SYS_DVBT2: | |
| case SYS_ISDBT: | |
| case SYS_DTMB: | |
| fepriv->min_delay = HZ / 20; | |
| fepriv->step_size = fe->ops.info.frequency_stepsize * 2; | |
| fepriv->max_drift = (fe->ops.info.frequency_stepsize * 2) + 1; | |
| break; | |
| default: | |
| /* | |
| * FIXME: This sounds wrong! if freqency_stepsize is | |
| * defined by the frontend, why not use it??? | |
| */ | |
| fepriv->min_delay = HZ / 20; | |
| fepriv->step_size = 0; /* no zigzag */ | |
| fepriv->max_drift = 0; | |
| break; | |
| } | |
| } | |
| if (dvb_override_tune_delay > 0) | |
| fepriv->min_delay = (dvb_override_tune_delay * HZ) / 1000; | |
| fepriv->state = FESTATE_RETUNE; | |
| /* Request the search algorithm to search */ | |
| fepriv->algo_status |= DVBFE_ALGO_SEARCH_AGAIN; | |
| dvb_frontend_clear_events(fe); | |
| dvb_frontend_add_event(fe, 0); | |
| dvb_frontend_wakeup(fe); | |
| fepriv->status = 0; | |
| return 0; | |
| } | |
| static int dvb_frontend_ioctl_legacy(struct file *file, | |
| unsigned int cmd, void *parg) | |
| { | |
| struct dvb_device *dvbdev = file->private_data; | |
| struct dvb_frontend *fe = dvbdev->priv; | |
| struct dvb_frontend_private *fepriv = fe->frontend_priv; | |
| struct dtv_frontend_properties *c = &fe->dtv_property_cache; | |
| int err = -EOPNOTSUPP; | |
| switch (cmd) { | |
| case FE_GET_INFO: { | |
| struct dvb_frontend_info* info = parg; | |
| memcpy(info, &fe->ops.info, sizeof(struct dvb_frontend_info)); | |
| dvb_frontend_get_frequency_limits(fe, &info->frequency_min, &info->frequency_max); | |
| /* | |
| * Associate the 4 delivery systems supported by DVBv3 | |
| * API with their DVBv5 counterpart. For the other standards, | |
| * use the closest type, assuming that it would hopefully | |
| * work with a DVBv3 application. | |
| * It should be noticed that, on multi-frontend devices with | |
| * different types (terrestrial and cable, for example), | |
| * a pure DVBv3 application won't be able to use all delivery | |
| * systems. Yet, changing the DVBv5 cache to the other delivery | |
| * system should be enough for making it work. | |
| */ | |
| switch (dvbv3_type(c->delivery_system)) { | |
| case DVBV3_QPSK: | |
| info->type = FE_QPSK; | |
| break; | |
| case DVBV3_ATSC: | |
| info->type = FE_ATSC; | |
| break; | |
| case DVBV3_QAM: | |
| info->type = FE_QAM; | |
| break; | |
| case DVBV3_OFDM: | |
| info->type = FE_OFDM; | |
| break; | |
| default: | |
| dev_err(fe->dvb->device, | |
| "%s: doesn't know how to handle a DVBv3 call to delivery system %i\n", | |
| __func__, c->delivery_system); | |
| fe->ops.info.type = FE_OFDM; | |
| } | |
| dev_dbg(fe->dvb->device, "%s: current delivery system on cache: %d, V3 type: %d\n", | |
| __func__, c->delivery_system, fe->ops.info.type); | |
| /* Force the CAN_INVERSION_AUTO bit on. If the frontend doesn't | |
| * do it, it is done for it. */ | |
| info->caps |= FE_CAN_INVERSION_AUTO; | |
| err = 0; | |
| break; | |
| } | |
| case FE_READ_STATUS: { | |
| fe_status_t* status = parg; | |
| /* if retune was requested but hasn't occurred yet, prevent | |
| * that user get signal state from previous tuning */ | |
| if (fepriv->state == FESTATE_RETUNE || | |
| fepriv->state == FESTATE_ERROR) { | |
| err=0; | |
| *status = 0; | |
| break; | |
| } | |
| if (fe->ops.read_status) | |
| err = fe->ops.read_status(fe, status); | |
| break; | |
| } | |
| case FE_READ_BER: | |
| if (fe->ops.read_ber) { | |
| if (fepriv->thread) | |
| err = fe->ops.read_ber(fe, (__u32 *) parg); | |
| else | |
| err = -EAGAIN; | |
| } | |
| break; | |
| case FE_READ_SIGNAL_STRENGTH: | |
| if (fe->ops.read_signal_strength) { | |
| if (fepriv->thread) | |
| err = fe->ops.read_signal_strength(fe, (__u16 *) parg); | |
| else | |
| err = -EAGAIN; | |
| } | |
| break; | |
| case FE_READ_SNR: | |
| if (fe->ops.read_snr) { | |
| if (fepriv->thread) | |
| err = fe->ops.read_snr(fe, (__u16 *) parg); | |
| else | |
| err = -EAGAIN; | |
| } | |
| break; | |
| case FE_READ_UNCORRECTED_BLOCKS: | |
| if (fe->ops.read_ucblocks) { | |
| if (fepriv->thread) | |
| err = fe->ops.read_ucblocks(fe, (__u32 *) parg); | |
| else | |
| err = -EAGAIN; | |
| } | |
| break; | |
| case FE_DISEQC_RESET_OVERLOAD: | |
| if (fe->ops.diseqc_reset_overload) { | |
| err = fe->ops.diseqc_reset_overload(fe); | |
| fepriv->state = FESTATE_DISEQC; | |
| fepriv->status = 0; | |
| } | |
| break; | |
| case FE_DISEQC_SEND_MASTER_CMD: | |
| if (fe->ops.diseqc_send_master_cmd) { | |
| err = fe->ops.diseqc_send_master_cmd(fe, (struct dvb_diseqc_master_cmd*) parg); | |
| fepriv->state = FESTATE_DISEQC; | |
| fepriv->status = 0; | |
| } | |
| break; | |
| case FE_DISEQC_SEND_BURST: | |
| if (fe->ops.diseqc_send_burst) { | |
| err = fe->ops.diseqc_send_burst(fe, (fe_sec_mini_cmd_t) parg); | |
| fepriv->state = FESTATE_DISEQC; | |
| fepriv->status = 0; | |
| } | |
| break; | |
| case FE_SET_TONE: | |
| if (fe->ops.set_tone) { | |
| err = fe->ops.set_tone(fe, (fe_sec_tone_mode_t) parg); | |
| fepriv->tone = (fe_sec_tone_mode_t) parg; | |
| fepriv->state = FESTATE_DISEQC; | |
| fepriv->status = 0; | |
| } | |
| break; | |
| case FE_SET_VOLTAGE: | |
| if (fe->ops.set_voltage) { | |
| err = fe->ops.set_voltage(fe, (fe_sec_voltage_t) parg); | |
| fepriv->voltage = (fe_sec_voltage_t) parg; | |
| fepriv->state = FESTATE_DISEQC; | |
| fepriv->status = 0; | |
| } | |
| break; | |
| case FE_DISHNETWORK_SEND_LEGACY_CMD: | |
| if (fe->ops.dishnetwork_send_legacy_command) { | |
| err = fe->ops.dishnetwork_send_legacy_command(fe, (unsigned long) parg); | |
| fepriv->state = FESTATE_DISEQC; | |
| fepriv->status = 0; | |
| } else if (fe->ops.set_voltage) { | |
| /* | |
| * NOTE: This is a fallback condition. Some frontends | |
| * (stv0299 for instance) take longer than 8msec to | |
| * respond to a set_voltage command. Those switches | |
| * need custom routines to switch properly. For all | |
| * other frontends, the following should work ok. | |
| * Dish network legacy switches (as used by Dish500) | |
| * are controlled by sending 9-bit command words | |
| * spaced 8msec apart. | |
| * the actual command word is switch/port dependent | |
| * so it is up to the userspace application to send | |
| * the right command. | |
| * The command must always start with a '0' after | |
| * initialization, so parg is 8 bits and does not | |
| * include the initialization or start bit | |
| */ | |
| unsigned long swcmd = ((unsigned long) parg) << 1; | |
| struct timeval nexttime; | |
| struct timeval tv[10]; | |
| int i; | |
| u8 last = 1; | |
| if (dvb_frontend_debug) | |
| printk("%s switch command: 0x%04lx\n", __func__, swcmd); | |
| do_gettimeofday(&nexttime); | |
| if (dvb_frontend_debug) | |
| tv[0] = nexttime; | |
| /* before sending a command, initialize by sending | |
| * a 32ms 18V to the switch | |
| */ | |
| fe->ops.set_voltage(fe, SEC_VOLTAGE_18); | |
| dvb_frontend_sleep_until(&nexttime, 32000); | |
| for (i = 0; i < 9; i++) { | |
| if (dvb_frontend_debug) | |
| do_gettimeofday(&tv[i + 1]); | |
| if ((swcmd & 0x01) != last) { | |
| /* set voltage to (last ? 13V : 18V) */ | |
| fe->ops.set_voltage(fe, (last) ? SEC_VOLTAGE_13 : SEC_VOLTAGE_18); | |
| last = (last) ? 0 : 1; | |
| } | |
| swcmd = swcmd >> 1; | |
| if (i != 8) | |
| dvb_frontend_sleep_until(&nexttime, 8000); | |
| } | |
| if (dvb_frontend_debug) { | |
| printk("%s(%d): switch delay (should be 32k followed by all 8k\n", | |
| __func__, fe->dvb->num); | |
| for (i = 1; i < 10; i++) | |
| printk("%d: %d\n", i, timeval_usec_diff(tv[i-1] , tv[i])); | |
| } | |
| err = 0; | |
| fepriv->state = FESTATE_DISEQC; | |
| fepriv->status = 0; | |
| } | |
| break; | |
| case FE_DISEQC_RECV_SLAVE_REPLY: | |
| if (fe->ops.diseqc_recv_slave_reply) | |
| err = fe->ops.diseqc_recv_slave_reply(fe, (struct dvb_diseqc_slave_reply*) parg); | |
| break; | |
| case FE_ENABLE_HIGH_LNB_VOLTAGE: | |
| if (fe->ops.enable_high_lnb_voltage) | |
| err = fe->ops.enable_high_lnb_voltage(fe, (long) parg); | |
| break; | |
| case FE_SET_FRONTEND: | |
| err = set_delivery_system(fe, SYS_UNDEFINED); | |
| if (err) | |
| break; | |
| err = dtv_property_cache_sync(fe, c, parg); | |
| if (err) | |
| break; | |
| err = dtv_set_frontend(fe); | |
| break; | |
| case FE_GET_EVENT: | |
| err = dvb_frontend_get_event (fe, parg, file->f_flags); | |
| break; | |
| case FE_GET_FRONTEND: | |
| err = dtv_get_frontend(fe, parg); | |
| break; | |
| case FE_SET_FRONTEND_TUNE_MODE: | |
| fepriv->tune_mode_flags = (unsigned long) parg; | |
| err = 0; | |
| break; | |
| } | |
| return err; | |
| } | |
| static unsigned int dvb_frontend_poll(struct file *file, struct poll_table_struct *wait) | |
| { | |
| struct dvb_device *dvbdev = file->private_data; | |
| struct dvb_frontend *fe = dvbdev->priv; | |
| struct dvb_frontend_private *fepriv = fe->frontend_priv; | |
| dev_dbg_ratelimited(fe->dvb->device, "%s:\n", __func__); | |
| poll_wait (file, &fepriv->events.wait_queue, wait); | |
| if (fepriv->events.eventw != fepriv->events.eventr) | |
| return (POLLIN | POLLRDNORM | POLLPRI); | |
| return 0; | |
| } | |
| static int dvb_frontend_open(struct inode *inode, struct file *file) | |
| { | |
| struct dvb_device *dvbdev = file->private_data; | |
| struct dvb_frontend *fe = dvbdev->priv; | |
| struct dvb_frontend_private *fepriv = fe->frontend_priv; | |
| struct dvb_adapter *adapter = fe->dvb; | |
| int ret; | |
| dev_dbg(fe->dvb->device, "%s:\n", __func__); | |
| if (fepriv->exit == DVB_FE_DEVICE_REMOVED) | |
| return -ENODEV; | |
| if (adapter->mfe_shared) { | |
| mutex_lock (&adapter->mfe_lock); | |
| if (adapter->mfe_dvbdev == NULL) | |
| adapter->mfe_dvbdev = dvbdev; | |
| else if (adapter->mfe_dvbdev != dvbdev) { | |
| struct dvb_device | |
| *mfedev = adapter->mfe_dvbdev; | |
| struct dvb_frontend | |
| *mfe = mfedev->priv; | |
| struct dvb_frontend_private | |
| *mfepriv = mfe->frontend_priv; | |
| int mferetry = (dvb_mfe_wait_time << 1); | |
| mutex_unlock (&adapter->mfe_lock); | |
| while (mferetry-- && (mfedev->users != -1 || | |
| mfepriv->thread != NULL)) { | |
| if(msleep_interruptible(500)) { | |
| if(signal_pending(current)) | |
| return -EINTR; | |
| } | |
| } | |
| mutex_lock (&adapter->mfe_lock); | |
| if(adapter->mfe_dvbdev != dvbdev) { | |
| mfedev = adapter->mfe_dvbdev; | |
| mfe = mfedev->priv; | |
| mfepriv = mfe->frontend_priv; | |
| if (mfedev->users != -1 || | |
| mfepriv->thread != NULL) { | |
| mutex_unlock (&adapter->mfe_lock); | |
| return -EBUSY; | |
| } | |
| adapter->mfe_dvbdev = dvbdev; | |
| } | |
| } | |
| } | |
| if (dvbdev->users == -1 && fe->ops.ts_bus_ctrl) { | |
| if ((ret = fe->ops.ts_bus_ctrl(fe, 1)) < 0) | |
| goto err0; | |
| /* If we took control of the bus, we need to force | |
| reinitialization. This is because many ts_bus_ctrl() | |
| functions strobe the RESET pin on the demod, and if the | |
| frontend thread already exists then the dvb_init() routine | |
| won't get called (which is what usually does initial | |
| register configuration). */ | |
| fepriv->reinitialise = 1; | |
| } | |
| if ((ret = dvb_generic_open (inode, file)) < 0) | |
| goto err1; | |
| if ((file->f_flags & O_ACCMODE) != O_RDONLY) { | |
| /* normal tune mode when opened R/W */ | |
| fepriv->tune_mode_flags &= ~FE_TUNE_MODE_ONESHOT; | |
| fepriv->tone = -1; | |
| fepriv->voltage = -1; | |
| ret = dvb_frontend_start (fe); | |
| if (ret) | |
| goto err2; | |
| /* empty event queue */ | |
| fepriv->events.eventr = fepriv->events.eventw = 0; | |
| } | |
| if (adapter->mfe_shared) | |
| mutex_unlock (&adapter->mfe_lock); | |
| return ret; | |
| err2: | |
| dvb_generic_release(inode, file); | |
| err1: | |
| if (dvbdev->users == -1 && fe->ops.ts_bus_ctrl) | |
| fe->ops.ts_bus_ctrl(fe, 0); | |
| err0: | |
| if (adapter->mfe_shared) | |
| mutex_unlock (&adapter->mfe_lock); | |
| return ret; | |
| } | |
| static int dvb_frontend_release(struct inode *inode, struct file *file) | |
| { | |
| struct dvb_device *dvbdev = file->private_data; | |
| struct dvb_frontend *fe = dvbdev->priv; | |
| struct dvb_frontend_private *fepriv = fe->frontend_priv; | |
| int ret; | |
| dev_dbg(fe->dvb->device, "%s:\n", __func__); | |
| if ((file->f_flags & O_ACCMODE) != O_RDONLY) { | |
| fepriv->release_jiffies = jiffies; | |
| mb(); | |
| } | |
| ret = dvb_generic_release (inode, file); | |
| if (dvbdev->users == -1) { | |
| wake_up(&fepriv->wait_queue); | |
| if (fepriv->exit != DVB_FE_NO_EXIT) { | |
| fops_put(file->f_op); | |
| file->f_op = NULL; | |
| wake_up(&dvbdev->wait_queue); | |
| } | |
| if (fe->ops.ts_bus_ctrl) | |
| fe->ops.ts_bus_ctrl(fe, 0); | |
| } | |
| return ret; | |
| } | |
| static const struct file_operations dvb_frontend_fops = { | |
| .owner = THIS_MODULE, | |
| .unlocked_ioctl = dvb_generic_ioctl, | |
| .poll = dvb_frontend_poll, | |
| .open = dvb_frontend_open, | |
| .release = dvb_frontend_release, | |
| .llseek = noop_llseek, | |
| }; | |
| int dvb_frontend_suspend(struct dvb_frontend *fe) | |
| { | |
| int ret = 0; | |
| dev_dbg(fe->dvb->device, "%s: adap=%d fe=%d\n", __func__, fe->dvb->num, | |
| fe->id); | |
| if (fe->ops.tuner_ops.sleep) | |
| ret = fe->ops.tuner_ops.sleep(fe); | |
| if (fe->ops.sleep) | |
| ret = fe->ops.sleep(fe); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL(dvb_frontend_suspend); | |
| int dvb_frontend_resume(struct dvb_frontend *fe) | |
| { | |
| struct dvb_frontend_private *fepriv = fe->frontend_priv; | |
| int ret = 0; | |
| dev_dbg(fe->dvb->device, "%s: adap=%d fe=%d\n", __func__, fe->dvb->num, | |
| fe->id); | |
| if (fe->ops.init) | |
| ret = fe->ops.init(fe); | |
| if (fe->ops.tuner_ops.init) | |
| ret = fe->ops.tuner_ops.init(fe); | |
| fepriv->state = FESTATE_RETUNE; | |
| dvb_frontend_wakeup(fe); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL(dvb_frontend_resume); | |
| int dvb_register_frontend(struct dvb_adapter* dvb, | |
| struct dvb_frontend* fe) | |
| { | |
| struct dvb_frontend_private *fepriv; | |
| static const struct dvb_device dvbdev_template = { | |
| .users = ~0, | |
| .writers = 1, | |
| .readers = (~0)-1, | |
| .fops = &dvb_frontend_fops, | |
| .kernel_ioctl = dvb_frontend_ioctl | |
| }; | |
| dev_dbg(dvb->device, "%s:\n", __func__); | |
| if (mutex_lock_interruptible(&frontend_mutex)) | |
| return -ERESTARTSYS; | |
| fe->frontend_priv = kzalloc(sizeof(struct dvb_frontend_private), GFP_KERNEL); | |
| if (fe->frontend_priv == NULL) { | |
| mutex_unlock(&frontend_mutex); | |
| return -ENOMEM; | |
| } | |
| fepriv = fe->frontend_priv; | |
| sema_init(&fepriv->sem, 1); | |
| init_waitqueue_head (&fepriv->wait_queue); | |
| init_waitqueue_head (&fepriv->events.wait_queue); | |
| mutex_init(&fepriv->events.mtx); | |
| fe->dvb = dvb; | |
| fepriv->inversion = INVERSION_OFF; | |
| dev_info(fe->dvb->device, | |
| "DVB: registering adapter %i frontend %i (%s)...\n", | |
| fe->dvb->num, fe->id, fe->ops.info.name); | |
| dvb_register_device (fe->dvb, &fepriv->dvbdev, &dvbdev_template, | |
| fe, DVB_DEVICE_FRONTEND); | |
| /* | |
| * Initialize the cache to the proper values according with the | |
| * first supported delivery system (ops->delsys[0]) | |
| */ | |
| fe->dtv_property_cache.delivery_system = fe->ops.delsys[0]; | |
| dvb_frontend_clear_cache(fe); | |
| mutex_unlock(&frontend_mutex); | |
| return 0; | |
| } | |
| EXPORT_SYMBOL(dvb_register_frontend); | |
| int dvb_unregister_frontend(struct dvb_frontend* fe) | |
| { | |
| struct dvb_frontend_private *fepriv = fe->frontend_priv; | |
| dev_dbg(fe->dvb->device, "%s:\n", __func__); | |
| mutex_lock(&frontend_mutex); | |
| dvb_frontend_stop (fe); | |
| mutex_unlock(&frontend_mutex); | |
| if (fepriv->dvbdev->users < -1) | |
| wait_event(fepriv->dvbdev->wait_queue, | |
| fepriv->dvbdev->users==-1); | |
| mutex_lock(&frontend_mutex); | |
| dvb_unregister_device (fepriv->dvbdev); | |
| /* fe is invalid now */ | |
| kfree(fepriv); | |
| mutex_unlock(&frontend_mutex); | |
| return 0; | |
| } | |
| EXPORT_SYMBOL(dvb_unregister_frontend); | |
| #ifdef CONFIG_MEDIA_ATTACH | |
| void dvb_frontend_detach(struct dvb_frontend* fe) | |
| { | |
| void *ptr; | |
| if (fe->ops.release_sec) { | |
| fe->ops.release_sec(fe); | |
| symbol_put_addr(fe->ops.release_sec); | |
| } | |
| if (fe->ops.tuner_ops.release) { | |
| fe->ops.tuner_ops.release(fe); | |
| symbol_put_addr(fe->ops.tuner_ops.release); | |
| } | |
| if (fe->ops.analog_ops.release) { | |
| fe->ops.analog_ops.release(fe); | |
| symbol_put_addr(fe->ops.analog_ops.release); | |
| } | |
| ptr = (void*)fe->ops.release; | |
| if (ptr) { | |
| fe->ops.release(fe); | |
| symbol_put_addr(ptr); | |
| } | |
| } | |
| #else | |
| void dvb_frontend_detach(struct dvb_frontend* fe) | |
| { | |
| if (fe->ops.release_sec) | |
| fe->ops.release_sec(fe); | |
| if (fe->ops.tuner_ops.release) | |
| fe->ops.tuner_ops.release(fe); | |
| if (fe->ops.analog_ops.release) | |
| fe->ops.analog_ops.release(fe); | |
| if (fe->ops.release) | |
| fe->ops.release(fe); | |
| } | |
| #endif | |
| EXPORT_SYMBOL(dvb_frontend_detach); |