| /* | |
| * Copyright (C) 1994 Linus Torvalds | |
| * | |
| * Pentium III FXSR, SSE support | |
| * General FPU state handling cleanups | |
| * Gareth Hughes <gareth@valinux.com>, May 2000 | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/regset.h> | |
| #include <linux/sched.h> | |
| #include <linux/slab.h> | |
| #include <asm/sigcontext.h> | |
| #include <asm/processor.h> | |
| #include <asm/math_emu.h> | |
| #include <asm/uaccess.h> | |
| #include <asm/ptrace.h> | |
| #include <asm/i387.h> | |
| #include <asm/fpu-internal.h> | |
| #include <asm/user.h> | |
| /* | |
| * Were we in an interrupt that interrupted kernel mode? | |
| * | |
| * For now, with eagerfpu we will return interrupted kernel FPU | |
| * state as not-idle. TBD: Ideally we can change the return value | |
| * to something like __thread_has_fpu(current). But we need to | |
| * be careful of doing __thread_clear_has_fpu() before saving | |
| * the FPU etc for supporting nested uses etc. For now, take | |
| * the simple route! | |
| * | |
| * On others, we can do a kernel_fpu_begin/end() pair *ONLY* if that | |
| * pair does nothing at all: the thread must not have fpu (so | |
| * that we don't try to save the FPU state), and TS must | |
| * be set (so that the clts/stts pair does nothing that is | |
| * visible in the interrupted kernel thread). | |
| */ | |
| static inline bool interrupted_kernel_fpu_idle(void) | |
| { | |
| if (use_eager_fpu()) | |
| return 0; | |
| return !__thread_has_fpu(current) && | |
| (read_cr0() & X86_CR0_TS); | |
| } | |
| /* | |
| * Were we in user mode (or vm86 mode) when we were | |
| * interrupted? | |
| * | |
| * Doing kernel_fpu_begin/end() is ok if we are running | |
| * in an interrupt context from user mode - we'll just | |
| * save the FPU state as required. | |
| */ | |
| static inline bool interrupted_user_mode(void) | |
| { | |
| struct pt_regs *regs = get_irq_regs(); | |
| return regs && user_mode_vm(regs); | |
| } | |
| /* | |
| * Can we use the FPU in kernel mode with the | |
| * whole "kernel_fpu_begin/end()" sequence? | |
| * | |
| * It's always ok in process context (ie "not interrupt") | |
| * but it is sometimes ok even from an irq. | |
| */ | |
| bool irq_fpu_usable(void) | |
| { | |
| return !in_interrupt() || | |
| interrupted_user_mode() || | |
| interrupted_kernel_fpu_idle(); | |
| } | |
| EXPORT_SYMBOL(irq_fpu_usable); | |
| void __kernel_fpu_begin(void) | |
| { | |
| struct task_struct *me = current; | |
| if (__thread_has_fpu(me)) { | |
| __save_init_fpu(me); | |
| __thread_clear_has_fpu(me); | |
| /* We do 'stts()' in __kernel_fpu_end() */ | |
| } else if (!use_eager_fpu()) { | |
| this_cpu_write(fpu_owner_task, NULL); | |
| clts(); | |
| } | |
| } | |
| EXPORT_SYMBOL(__kernel_fpu_begin); | |
| void __kernel_fpu_end(void) | |
| { | |
| if (use_eager_fpu()) | |
| math_state_restore(); | |
| else | |
| stts(); | |
| } | |
| EXPORT_SYMBOL(__kernel_fpu_end); | |
| void unlazy_fpu(struct task_struct *tsk) | |
| { | |
| preempt_disable(); | |
| if (__thread_has_fpu(tsk)) { | |
| __save_init_fpu(tsk); | |
| __thread_fpu_end(tsk); | |
| } else | |
| tsk->fpu_counter = 0; | |
| preempt_enable(); | |
| } | |
| EXPORT_SYMBOL(unlazy_fpu); | |
| unsigned int mxcsr_feature_mask __read_mostly = 0xffffffffu; | |
| unsigned int xstate_size; | |
| EXPORT_SYMBOL_GPL(xstate_size); | |
| static struct i387_fxsave_struct fx_scratch __cpuinitdata; | |
| static void __cpuinit mxcsr_feature_mask_init(void) | |
| { | |
| unsigned long mask = 0; | |
| if (cpu_has_fxsr) { | |
| memset(&fx_scratch, 0, sizeof(struct i387_fxsave_struct)); | |
| asm volatile("fxsave %0" : : "m" (fx_scratch)); | |
| mask = fx_scratch.mxcsr_mask; | |
| if (mask == 0) | |
| mask = 0x0000ffbf; | |
| } | |
| mxcsr_feature_mask &= mask; | |
| } | |
| static void __cpuinit init_thread_xstate(void) | |
| { | |
| /* | |
| * Note that xstate_size might be overwriten later during | |
| * xsave_init(). | |
| */ | |
| if (!HAVE_HWFP) { | |
| /* | |
| * Disable xsave as we do not support it if i387 | |
| * emulation is enabled. | |
| */ | |
| setup_clear_cpu_cap(X86_FEATURE_XSAVE); | |
| setup_clear_cpu_cap(X86_FEATURE_XSAVEOPT); | |
| xstate_size = sizeof(struct i387_soft_struct); | |
| return; | |
| } | |
| if (cpu_has_fxsr) | |
| xstate_size = sizeof(struct i387_fxsave_struct); | |
| else | |
| xstate_size = sizeof(struct i387_fsave_struct); | |
| } | |
| /* | |
| * Called at bootup to set up the initial FPU state that is later cloned | |
| * into all processes. | |
| */ | |
| void __cpuinit fpu_init(void) | |
| { | |
| unsigned long cr0; | |
| unsigned long cr4_mask = 0; | |
| if (cpu_has_fxsr) | |
| cr4_mask |= X86_CR4_OSFXSR; | |
| if (cpu_has_xmm) | |
| cr4_mask |= X86_CR4_OSXMMEXCPT; | |
| if (cr4_mask) | |
| set_in_cr4(cr4_mask); | |
| cr0 = read_cr0(); | |
| cr0 &= ~(X86_CR0_TS|X86_CR0_EM); /* clear TS and EM */ | |
| if (!HAVE_HWFP) | |
| cr0 |= X86_CR0_EM; | |
| write_cr0(cr0); | |
| /* | |
| * init_thread_xstate is only called once to avoid overriding | |
| * xstate_size during boot time or during CPU hotplug. | |
| */ | |
| if (xstate_size == 0) | |
| init_thread_xstate(); | |
| mxcsr_feature_mask_init(); | |
| xsave_init(); | |
| eager_fpu_init(); | |
| } | |
| void fpu_finit(struct fpu *fpu) | |
| { | |
| if (!HAVE_HWFP) { | |
| finit_soft_fpu(&fpu->state->soft); | |
| return; | |
| } | |
| if (cpu_has_fxsr) { | |
| fx_finit(&fpu->state->fxsave); | |
| } else { | |
| struct i387_fsave_struct *fp = &fpu->state->fsave; | |
| memset(fp, 0, xstate_size); | |
| fp->cwd = 0xffff037fu; | |
| fp->swd = 0xffff0000u; | |
| fp->twd = 0xffffffffu; | |
| fp->fos = 0xffff0000u; | |
| } | |
| } | |
| EXPORT_SYMBOL_GPL(fpu_finit); | |
| /* | |
| * The _current_ task is using the FPU for the first time | |
| * so initialize it and set the mxcsr to its default | |
| * value at reset if we support XMM instructions and then | |
| * remember the current task has used the FPU. | |
| */ | |
| int init_fpu(struct task_struct *tsk) | |
| { | |
| int ret; | |
| if (tsk_used_math(tsk)) { | |
| if (HAVE_HWFP && tsk == current) | |
| unlazy_fpu(tsk); | |
| tsk->thread.fpu.last_cpu = ~0; | |
| return 0; | |
| } | |
| /* | |
| * Memory allocation at the first usage of the FPU and other state. | |
| */ | |
| ret = fpu_alloc(&tsk->thread.fpu); | |
| if (ret) | |
| return ret; | |
| fpu_finit(&tsk->thread.fpu); | |
| set_stopped_child_used_math(tsk); | |
| return 0; | |
| } | |
| EXPORT_SYMBOL_GPL(init_fpu); | |
| /* | |
| * The xstateregs_active() routine is the same as the fpregs_active() routine, | |
| * as the "regset->n" for the xstate regset will be updated based on the feature | |
| * capabilites supported by the xsave. | |
| */ | |
| int fpregs_active(struct task_struct *target, const struct user_regset *regset) | |
| { | |
| return tsk_used_math(target) ? regset->n : 0; | |
| } | |
| int xfpregs_active(struct task_struct *target, const struct user_regset *regset) | |
| { | |
| return (cpu_has_fxsr && tsk_used_math(target)) ? regset->n : 0; | |
| } | |
| int xfpregs_get(struct task_struct *target, const struct user_regset *regset, | |
| unsigned int pos, unsigned int count, | |
| void *kbuf, void __user *ubuf) | |
| { | |
| int ret; | |
| if (!cpu_has_fxsr) | |
| return -ENODEV; | |
| ret = init_fpu(target); | |
| if (ret) | |
| return ret; | |
| sanitize_i387_state(target); | |
| return user_regset_copyout(&pos, &count, &kbuf, &ubuf, | |
| &target->thread.fpu.state->fxsave, 0, -1); | |
| } | |
| int xfpregs_set(struct task_struct *target, const struct user_regset *regset, | |
| unsigned int pos, unsigned int count, | |
| const void *kbuf, const void __user *ubuf) | |
| { | |
| int ret; | |
| if (!cpu_has_fxsr) | |
| return -ENODEV; | |
| ret = init_fpu(target); | |
| if (ret) | |
| return ret; | |
| sanitize_i387_state(target); | |
| ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, | |
| &target->thread.fpu.state->fxsave, 0, -1); | |
| /* | |
| * mxcsr reserved bits must be masked to zero for security reasons. | |
| */ | |
| target->thread.fpu.state->fxsave.mxcsr &= mxcsr_feature_mask; | |
| /* | |
| * update the header bits in the xsave header, indicating the | |
| * presence of FP and SSE state. | |
| */ | |
| if (cpu_has_xsave) | |
| target->thread.fpu.state->xsave.xsave_hdr.xstate_bv |= XSTATE_FPSSE; | |
| return ret; | |
| } | |
| int xstateregs_get(struct task_struct *target, const struct user_regset *regset, | |
| unsigned int pos, unsigned int count, | |
| void *kbuf, void __user *ubuf) | |
| { | |
| int ret; | |
| if (!cpu_has_xsave) | |
| return -ENODEV; | |
| ret = init_fpu(target); | |
| if (ret) | |
| return ret; | |
| /* | |
| * Copy the 48bytes defined by the software first into the xstate | |
| * memory layout in the thread struct, so that we can copy the entire | |
| * xstateregs to the user using one user_regset_copyout(). | |
| */ | |
| memcpy(&target->thread.fpu.state->fxsave.sw_reserved, | |
| xstate_fx_sw_bytes, sizeof(xstate_fx_sw_bytes)); | |
| /* | |
| * Copy the xstate memory layout. | |
| */ | |
| ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, | |
| &target->thread.fpu.state->xsave, 0, -1); | |
| return ret; | |
| } | |
| int xstateregs_set(struct task_struct *target, const struct user_regset *regset, | |
| unsigned int pos, unsigned int count, | |
| const void *kbuf, const void __user *ubuf) | |
| { | |
| int ret; | |
| struct xsave_hdr_struct *xsave_hdr; | |
| if (!cpu_has_xsave) | |
| return -ENODEV; | |
| ret = init_fpu(target); | |
| if (ret) | |
| return ret; | |
| ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, | |
| &target->thread.fpu.state->xsave, 0, -1); | |
| /* | |
| * mxcsr reserved bits must be masked to zero for security reasons. | |
| */ | |
| target->thread.fpu.state->fxsave.mxcsr &= mxcsr_feature_mask; | |
| xsave_hdr = &target->thread.fpu.state->xsave.xsave_hdr; | |
| xsave_hdr->xstate_bv &= pcntxt_mask; | |
| /* | |
| * These bits must be zero. | |
| */ | |
| xsave_hdr->reserved1[0] = xsave_hdr->reserved1[1] = 0; | |
| return ret; | |
| } | |
| #if defined CONFIG_X86_32 || defined CONFIG_IA32_EMULATION | |
| /* | |
| * FPU tag word conversions. | |
| */ | |
| static inline unsigned short twd_i387_to_fxsr(unsigned short twd) | |
| { | |
| unsigned int tmp; /* to avoid 16 bit prefixes in the code */ | |
| /* Transform each pair of bits into 01 (valid) or 00 (empty) */ | |
| tmp = ~twd; | |
| tmp = (tmp | (tmp>>1)) & 0x5555; /* 0V0V0V0V0V0V0V0V */ | |
| /* and move the valid bits to the lower byte. */ | |
| tmp = (tmp | (tmp >> 1)) & 0x3333; /* 00VV00VV00VV00VV */ | |
| tmp = (tmp | (tmp >> 2)) & 0x0f0f; /* 0000VVVV0000VVVV */ | |
| tmp = (tmp | (tmp >> 4)) & 0x00ff; /* 00000000VVVVVVVV */ | |
| return tmp; | |
| } | |
| #define FPREG_ADDR(f, n) ((void *)&(f)->st_space + (n) * 16) | |
| #define FP_EXP_TAG_VALID 0 | |
| #define FP_EXP_TAG_ZERO 1 | |
| #define FP_EXP_TAG_SPECIAL 2 | |
| #define FP_EXP_TAG_EMPTY 3 | |
| static inline u32 twd_fxsr_to_i387(struct i387_fxsave_struct *fxsave) | |
| { | |
| struct _fpxreg *st; | |
| u32 tos = (fxsave->swd >> 11) & 7; | |
| u32 twd = (unsigned long) fxsave->twd; | |
| u32 tag; | |
| u32 ret = 0xffff0000u; | |
| int i; | |
| for (i = 0; i < 8; i++, twd >>= 1) { | |
| if (twd & 0x1) { | |
| st = FPREG_ADDR(fxsave, (i - tos) & 7); | |
| switch (st->exponent & 0x7fff) { | |
| case 0x7fff: | |
| tag = FP_EXP_TAG_SPECIAL; | |
| break; | |
| case 0x0000: | |
| if (!st->significand[0] && | |
| !st->significand[1] && | |
| !st->significand[2] && | |
| !st->significand[3]) | |
| tag = FP_EXP_TAG_ZERO; | |
| else | |
| tag = FP_EXP_TAG_SPECIAL; | |
| break; | |
| default: | |
| if (st->significand[3] & 0x8000) | |
| tag = FP_EXP_TAG_VALID; | |
| else | |
| tag = FP_EXP_TAG_SPECIAL; | |
| break; | |
| } | |
| } else { | |
| tag = FP_EXP_TAG_EMPTY; | |
| } | |
| ret |= tag << (2 * i); | |
| } | |
| return ret; | |
| } | |
| /* | |
| * FXSR floating point environment conversions. | |
| */ | |
| void | |
| convert_from_fxsr(struct user_i387_ia32_struct *env, struct task_struct *tsk) | |
| { | |
| struct i387_fxsave_struct *fxsave = &tsk->thread.fpu.state->fxsave; | |
| struct _fpreg *to = (struct _fpreg *) &env->st_space[0]; | |
| struct _fpxreg *from = (struct _fpxreg *) &fxsave->st_space[0]; | |
| int i; | |
| env->cwd = fxsave->cwd | 0xffff0000u; | |
| env->swd = fxsave->swd | 0xffff0000u; | |
| env->twd = twd_fxsr_to_i387(fxsave); | |
| #ifdef CONFIG_X86_64 | |
| env->fip = fxsave->rip; | |
| env->foo = fxsave->rdp; | |
| /* | |
| * should be actually ds/cs at fpu exception time, but | |
| * that information is not available in 64bit mode. | |
| */ | |
| env->fcs = task_pt_regs(tsk)->cs; | |
| if (tsk == current) { | |
| savesegment(ds, env->fos); | |
| } else { | |
| env->fos = tsk->thread.ds; | |
| } | |
| env->fos |= 0xffff0000; | |
| #else | |
| env->fip = fxsave->fip; | |
| env->fcs = (u16) fxsave->fcs | ((u32) fxsave->fop << 16); | |
| env->foo = fxsave->foo; | |
| env->fos = fxsave->fos; | |
| #endif | |
| for (i = 0; i < 8; ++i) | |
| memcpy(&to[i], &from[i], sizeof(to[0])); | |
| } | |
| void convert_to_fxsr(struct task_struct *tsk, | |
| const struct user_i387_ia32_struct *env) | |
| { | |
| struct i387_fxsave_struct *fxsave = &tsk->thread.fpu.state->fxsave; | |
| struct _fpreg *from = (struct _fpreg *) &env->st_space[0]; | |
| struct _fpxreg *to = (struct _fpxreg *) &fxsave->st_space[0]; | |
| int i; | |
| fxsave->cwd = env->cwd; | |
| fxsave->swd = env->swd; | |
| fxsave->twd = twd_i387_to_fxsr(env->twd); | |
| fxsave->fop = (u16) ((u32) env->fcs >> 16); | |
| #ifdef CONFIG_X86_64 | |
| fxsave->rip = env->fip; | |
| fxsave->rdp = env->foo; | |
| /* cs and ds ignored */ | |
| #else | |
| fxsave->fip = env->fip; | |
| fxsave->fcs = (env->fcs & 0xffff); | |
| fxsave->foo = env->foo; | |
| fxsave->fos = env->fos; | |
| #endif | |
| for (i = 0; i < 8; ++i) | |
| memcpy(&to[i], &from[i], sizeof(from[0])); | |
| } | |
| int fpregs_get(struct task_struct *target, const struct user_regset *regset, | |
| unsigned int pos, unsigned int count, | |
| void *kbuf, void __user *ubuf) | |
| { | |
| struct user_i387_ia32_struct env; | |
| int ret; | |
| ret = init_fpu(target); | |
| if (ret) | |
| return ret; | |
| if (!HAVE_HWFP) | |
| return fpregs_soft_get(target, regset, pos, count, kbuf, ubuf); | |
| if (!cpu_has_fxsr) { | |
| return user_regset_copyout(&pos, &count, &kbuf, &ubuf, | |
| &target->thread.fpu.state->fsave, 0, | |
| -1); | |
| } | |
| sanitize_i387_state(target); | |
| if (kbuf && pos == 0 && count == sizeof(env)) { | |
| convert_from_fxsr(kbuf, target); | |
| return 0; | |
| } | |
| convert_from_fxsr(&env, target); | |
| return user_regset_copyout(&pos, &count, &kbuf, &ubuf, &env, 0, -1); | |
| } | |
| int fpregs_set(struct task_struct *target, const struct user_regset *regset, | |
| unsigned int pos, unsigned int count, | |
| const void *kbuf, const void __user *ubuf) | |
| { | |
| struct user_i387_ia32_struct env; | |
| int ret; | |
| ret = init_fpu(target); | |
| if (ret) | |
| return ret; | |
| sanitize_i387_state(target); | |
| if (!HAVE_HWFP) | |
| return fpregs_soft_set(target, regset, pos, count, kbuf, ubuf); | |
| if (!cpu_has_fxsr) { | |
| return user_regset_copyin(&pos, &count, &kbuf, &ubuf, | |
| &target->thread.fpu.state->fsave, 0, -1); | |
| } | |
| if (pos > 0 || count < sizeof(env)) | |
| convert_from_fxsr(&env, target); | |
| ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &env, 0, -1); | |
| if (!ret) | |
| convert_to_fxsr(target, &env); | |
| /* | |
| * update the header bit in the xsave header, indicating the | |
| * presence of FP. | |
| */ | |
| if (cpu_has_xsave) | |
| target->thread.fpu.state->xsave.xsave_hdr.xstate_bv |= XSTATE_FP; | |
| return ret; | |
| } | |
| /* | |
| * FPU state for core dumps. | |
| * This is only used for a.out dumps now. | |
| * It is declared generically using elf_fpregset_t (which is | |
| * struct user_i387_struct) but is in fact only used for 32-bit | |
| * dumps, so on 64-bit it is really struct user_i387_ia32_struct. | |
| */ | |
| int dump_fpu(struct pt_regs *regs, struct user_i387_struct *fpu) | |
| { | |
| struct task_struct *tsk = current; | |
| int fpvalid; | |
| fpvalid = !!used_math(); | |
| if (fpvalid) | |
| fpvalid = !fpregs_get(tsk, NULL, | |
| 0, sizeof(struct user_i387_ia32_struct), | |
| fpu, NULL); | |
| return fpvalid; | |
| } | |
| EXPORT_SYMBOL(dump_fpu); | |
| #endif /* CONFIG_X86_32 || CONFIG_IA32_EMULATION */ |