| /* | |
| * This file is subject to the terms and conditions of the GNU General Public | |
| * License. See the file "COPYING" in the main directory of this archive | |
| * for more details. | |
| * | |
| * Copyright (C) 1992 Ross Biro | |
| * Copyright (C) Linus Torvalds | |
| * Copyright (C) 1994, 95, 96, 97, 98, 2000 Ralf Baechle | |
| * Copyright (C) 1996 David S. Miller | |
| * Kevin D. Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com | |
| * Copyright (C) 1999 MIPS Technologies, Inc. | |
| * Copyright (C) 2000 Ulf Carlsson | |
| * | |
| * At this time Linux/MIPS64 only supports syscall tracing, even for 32-bit | |
| * binaries. | |
| */ | |
| #include <linux/compiler.h> | |
| #include <linux/kernel.h> | |
| #include <linux/sched.h> | |
| #include <linux/mm.h> | |
| #include <linux/errno.h> | |
| #include <linux/ptrace.h> | |
| #include <linux/smp.h> | |
| #include <linux/user.h> | |
| #include <linux/security.h> | |
| #include <linux/audit.h> | |
| #include <linux/seccomp.h> | |
| #include <asm/byteorder.h> | |
| #include <asm/cpu.h> | |
| #include <asm/dsp.h> | |
| #include <asm/fpu.h> | |
| #include <asm/mipsregs.h> | |
| #include <asm/mipsmtregs.h> | |
| #include <asm/pgtable.h> | |
| #include <asm/page.h> | |
| #include <asm/uaccess.h> | |
| #include <asm/bootinfo.h> | |
| #include <asm/reg.h> | |
| /* | |
| * Called by kernel/ptrace.c when detaching.. | |
| * | |
| * Make sure single step bits etc are not set. | |
| */ | |
| void ptrace_disable(struct task_struct *child) | |
| { | |
| /* Don't load the watchpoint registers for the ex-child. */ | |
| clear_tsk_thread_flag(child, TIF_LOAD_WATCH); | |
| } | |
| /* | |
| * Read a general register set. We always use the 64-bit format, even | |
| * for 32-bit kernels and for 32-bit processes on a 64-bit kernel. | |
| * Registers are sign extended to fill the available space. | |
| */ | |
| int ptrace_getregs(struct task_struct *child, __s64 __user *data) | |
| { | |
| struct pt_regs *regs; | |
| int i; | |
| if (!access_ok(VERIFY_WRITE, data, 38 * 8)) | |
| return -EIO; | |
| regs = task_pt_regs(child); | |
| for (i = 0; i < 32; i++) | |
| __put_user((long)regs->regs[i], data + i); | |
| __put_user((long)regs->lo, data + EF_LO - EF_R0); | |
| __put_user((long)regs->hi, data + EF_HI - EF_R0); | |
| __put_user((long)regs->cp0_epc, data + EF_CP0_EPC - EF_R0); | |
| __put_user((long)regs->cp0_badvaddr, data + EF_CP0_BADVADDR - EF_R0); | |
| __put_user((long)regs->cp0_status, data + EF_CP0_STATUS - EF_R0); | |
| __put_user((long)regs->cp0_cause, data + EF_CP0_CAUSE - EF_R0); | |
| return 0; | |
| } | |
| /* | |
| * Write a general register set. As for PTRACE_GETREGS, we always use | |
| * the 64-bit format. On a 32-bit kernel only the lower order half | |
| * (according to endianness) will be used. | |
| */ | |
| int ptrace_setregs(struct task_struct *child, __s64 __user *data) | |
| { | |
| struct pt_regs *regs; | |
| int i; | |
| if (!access_ok(VERIFY_READ, data, 38 * 8)) | |
| return -EIO; | |
| regs = task_pt_regs(child); | |
| for (i = 0; i < 32; i++) | |
| __get_user(regs->regs[i], data + i); | |
| __get_user(regs->lo, data + EF_LO - EF_R0); | |
| __get_user(regs->hi, data + EF_HI - EF_R0); | |
| __get_user(regs->cp0_epc, data + EF_CP0_EPC - EF_R0); | |
| /* badvaddr, status, and cause may not be written. */ | |
| return 0; | |
| } | |
| int ptrace_getfpregs(struct task_struct *child, __u32 __user *data) | |
| { | |
| int i; | |
| unsigned int tmp; | |
| if (!access_ok(VERIFY_WRITE, data, 33 * 8)) | |
| return -EIO; | |
| if (tsk_used_math(child)) { | |
| fpureg_t *fregs = get_fpu_regs(child); | |
| for (i = 0; i < 32; i++) | |
| __put_user(fregs[i], i + (__u64 __user *) data); | |
| } else { | |
| for (i = 0; i < 32; i++) | |
| __put_user((__u64) -1, i + (__u64 __user *) data); | |
| } | |
| __put_user(child->thread.fpu.fcr31, data + 64); | |
| preempt_disable(); | |
| if (cpu_has_fpu) { | |
| unsigned int flags; | |
| if (cpu_has_mipsmt) { | |
| unsigned int vpflags = dvpe(); | |
| flags = read_c0_status(); | |
| __enable_fpu(); | |
| __asm__ __volatile__("cfc1\t%0,$0" : "=r" (tmp)); | |
| write_c0_status(flags); | |
| evpe(vpflags); | |
| } else { | |
| flags = read_c0_status(); | |
| __enable_fpu(); | |
| __asm__ __volatile__("cfc1\t%0,$0" : "=r" (tmp)); | |
| write_c0_status(flags); | |
| } | |
| } else { | |
| tmp = 0; | |
| } | |
| preempt_enable(); | |
| __put_user(tmp, data + 65); | |
| return 0; | |
| } | |
| int ptrace_setfpregs(struct task_struct *child, __u32 __user *data) | |
| { | |
| fpureg_t *fregs; | |
| int i; | |
| if (!access_ok(VERIFY_READ, data, 33 * 8)) | |
| return -EIO; | |
| fregs = get_fpu_regs(child); | |
| for (i = 0; i < 32; i++) | |
| __get_user(fregs[i], i + (__u64 __user *) data); | |
| __get_user(child->thread.fpu.fcr31, data + 64); | |
| /* FIR may not be written. */ | |
| return 0; | |
| } | |
| int ptrace_get_watch_regs(struct task_struct *child, | |
| struct pt_watch_regs __user *addr) | |
| { | |
| enum pt_watch_style style; | |
| int i; | |
| if (!cpu_has_watch || current_cpu_data.watch_reg_use_cnt == 0) | |
| return -EIO; | |
| if (!access_ok(VERIFY_WRITE, addr, sizeof(struct pt_watch_regs))) | |
| return -EIO; | |
| #ifdef CONFIG_32BIT | |
| style = pt_watch_style_mips32; | |
| #define WATCH_STYLE mips32 | |
| #else | |
| style = pt_watch_style_mips64; | |
| #define WATCH_STYLE mips64 | |
| #endif | |
| __put_user(style, &addr->style); | |
| __put_user(current_cpu_data.watch_reg_use_cnt, | |
| &addr->WATCH_STYLE.num_valid); | |
| for (i = 0; i < current_cpu_data.watch_reg_use_cnt; i++) { | |
| __put_user(child->thread.watch.mips3264.watchlo[i], | |
| &addr->WATCH_STYLE.watchlo[i]); | |
| __put_user(child->thread.watch.mips3264.watchhi[i] & 0xfff, | |
| &addr->WATCH_STYLE.watchhi[i]); | |
| __put_user(current_cpu_data.watch_reg_masks[i], | |
| &addr->WATCH_STYLE.watch_masks[i]); | |
| } | |
| for (; i < 8; i++) { | |
| __put_user(0, &addr->WATCH_STYLE.watchlo[i]); | |
| __put_user(0, &addr->WATCH_STYLE.watchhi[i]); | |
| __put_user(0, &addr->WATCH_STYLE.watch_masks[i]); | |
| } | |
| return 0; | |
| } | |
| int ptrace_set_watch_regs(struct task_struct *child, | |
| struct pt_watch_regs __user *addr) | |
| { | |
| int i; | |
| int watch_active = 0; | |
| unsigned long lt[NUM_WATCH_REGS]; | |
| u16 ht[NUM_WATCH_REGS]; | |
| if (!cpu_has_watch || current_cpu_data.watch_reg_use_cnt == 0) | |
| return -EIO; | |
| if (!access_ok(VERIFY_READ, addr, sizeof(struct pt_watch_regs))) | |
| return -EIO; | |
| /* Check the values. */ | |
| for (i = 0; i < current_cpu_data.watch_reg_use_cnt; i++) { | |
| __get_user(lt[i], &addr->WATCH_STYLE.watchlo[i]); | |
| #ifdef CONFIG_32BIT | |
| if (lt[i] & __UA_LIMIT) | |
| return -EINVAL; | |
| #else | |
| if (test_tsk_thread_flag(child, TIF_32BIT_ADDR)) { | |
| if (lt[i] & 0xffffffff80000000UL) | |
| return -EINVAL; | |
| } else { | |
| if (lt[i] & __UA_LIMIT) | |
| return -EINVAL; | |
| } | |
| #endif | |
| __get_user(ht[i], &addr->WATCH_STYLE.watchhi[i]); | |
| if (ht[i] & ~0xff8) | |
| return -EINVAL; | |
| } | |
| /* Install them. */ | |
| for (i = 0; i < current_cpu_data.watch_reg_use_cnt; i++) { | |
| if (lt[i] & 7) | |
| watch_active = 1; | |
| child->thread.watch.mips3264.watchlo[i] = lt[i]; | |
| /* Set the G bit. */ | |
| child->thread.watch.mips3264.watchhi[i] = ht[i]; | |
| } | |
| if (watch_active) | |
| set_tsk_thread_flag(child, TIF_LOAD_WATCH); | |
| else | |
| clear_tsk_thread_flag(child, TIF_LOAD_WATCH); | |
| return 0; | |
| } | |
| long arch_ptrace(struct task_struct *child, long request, | |
| unsigned long addr, unsigned long data) | |
| { | |
| int ret; | |
| void __user *addrp = (void __user *) addr; | |
| void __user *datavp = (void __user *) data; | |
| unsigned long __user *datalp = (void __user *) data; | |
| switch (request) { | |
| /* when I and D space are separate, these will need to be fixed. */ | |
| case PTRACE_PEEKTEXT: /* read word at location addr. */ | |
| case PTRACE_PEEKDATA: | |
| ret = generic_ptrace_peekdata(child, addr, data); | |
| break; | |
| /* Read the word at location addr in the USER area. */ | |
| case PTRACE_PEEKUSR: { | |
| struct pt_regs *regs; | |
| unsigned long tmp = 0; | |
| regs = task_pt_regs(child); | |
| ret = 0; /* Default return value. */ | |
| switch (addr) { | |
| case 0 ... 31: | |
| tmp = regs->regs[addr]; | |
| break; | |
| case FPR_BASE ... FPR_BASE + 31: | |
| if (tsk_used_math(child)) { | |
| fpureg_t *fregs = get_fpu_regs(child); | |
| #ifdef CONFIG_32BIT | |
| /* | |
| * The odd registers are actually the high | |
| * order bits of the values stored in the even | |
| * registers - unless we're using r2k_switch.S. | |
| */ | |
| if (addr & 1) | |
| tmp = (unsigned long) (fregs[((addr & ~1) - 32)] >> 32); | |
| else | |
| tmp = (unsigned long) (fregs[(addr - 32)] & 0xffffffff); | |
| #endif | |
| #ifdef CONFIG_64BIT | |
| tmp = fregs[addr - FPR_BASE]; | |
| #endif | |
| } else { | |
| tmp = -1; /* FP not yet used */ | |
| } | |
| break; | |
| case PC: | |
| tmp = regs->cp0_epc; | |
| break; | |
| case CAUSE: | |
| tmp = regs->cp0_cause; | |
| break; | |
| case BADVADDR: | |
| tmp = regs->cp0_badvaddr; | |
| break; | |
| case MMHI: | |
| tmp = regs->hi; | |
| break; | |
| case MMLO: | |
| tmp = regs->lo; | |
| break; | |
| #ifdef CONFIG_CPU_HAS_SMARTMIPS | |
| case ACX: | |
| tmp = regs->acx; | |
| break; | |
| #endif | |
| case FPC_CSR: | |
| tmp = child->thread.fpu.fcr31; | |
| break; | |
| case FPC_EIR: { /* implementation / version register */ | |
| unsigned int flags; | |
| #ifdef CONFIG_MIPS_MT_SMTC | |
| unsigned long irqflags; | |
| unsigned int mtflags; | |
| #endif /* CONFIG_MIPS_MT_SMTC */ | |
| preempt_disable(); | |
| if (!cpu_has_fpu) { | |
| preempt_enable(); | |
| break; | |
| } | |
| #ifdef CONFIG_MIPS_MT_SMTC | |
| /* Read-modify-write of Status must be atomic */ | |
| local_irq_save(irqflags); | |
| mtflags = dmt(); | |
| #endif /* CONFIG_MIPS_MT_SMTC */ | |
| if (cpu_has_mipsmt) { | |
| unsigned int vpflags = dvpe(); | |
| flags = read_c0_status(); | |
| __enable_fpu(); | |
| __asm__ __volatile__("cfc1\t%0,$0": "=r" (tmp)); | |
| write_c0_status(flags); | |
| evpe(vpflags); | |
| } else { | |
| flags = read_c0_status(); | |
| __enable_fpu(); | |
| __asm__ __volatile__("cfc1\t%0,$0": "=r" (tmp)); | |
| write_c0_status(flags); | |
| } | |
| #ifdef CONFIG_MIPS_MT_SMTC | |
| emt(mtflags); | |
| local_irq_restore(irqflags); | |
| #endif /* CONFIG_MIPS_MT_SMTC */ | |
| preempt_enable(); | |
| break; | |
| } | |
| case DSP_BASE ... DSP_BASE + 5: { | |
| dspreg_t *dregs; | |
| if (!cpu_has_dsp) { | |
| tmp = 0; | |
| ret = -EIO; | |
| goto out; | |
| } | |
| dregs = __get_dsp_regs(child); | |
| tmp = (unsigned long) (dregs[addr - DSP_BASE]); | |
| break; | |
| } | |
| case DSP_CONTROL: | |
| if (!cpu_has_dsp) { | |
| tmp = 0; | |
| ret = -EIO; | |
| goto out; | |
| } | |
| tmp = child->thread.dsp.dspcontrol; | |
| break; | |
| default: | |
| tmp = 0; | |
| ret = -EIO; | |
| goto out; | |
| } | |
| ret = put_user(tmp, datalp); | |
| break; | |
| } | |
| /* when I and D space are separate, this will have to be fixed. */ | |
| case PTRACE_POKETEXT: /* write the word at location addr. */ | |
| case PTRACE_POKEDATA: | |
| ret = generic_ptrace_pokedata(child, addr, data); | |
| break; | |
| case PTRACE_POKEUSR: { | |
| struct pt_regs *regs; | |
| ret = 0; | |
| regs = task_pt_regs(child); | |
| switch (addr) { | |
| case 0 ... 31: | |
| regs->regs[addr] = data; | |
| break; | |
| case FPR_BASE ... FPR_BASE + 31: { | |
| fpureg_t *fregs = get_fpu_regs(child); | |
| if (!tsk_used_math(child)) { | |
| /* FP not yet used */ | |
| memset(&child->thread.fpu, ~0, | |
| sizeof(child->thread.fpu)); | |
| child->thread.fpu.fcr31 = 0; | |
| } | |
| #ifdef CONFIG_32BIT | |
| /* | |
| * The odd registers are actually the high order bits | |
| * of the values stored in the even registers - unless | |
| * we're using r2k_switch.S. | |
| */ | |
| if (addr & 1) { | |
| fregs[(addr & ~1) - FPR_BASE] &= 0xffffffff; | |
| fregs[(addr & ~1) - FPR_BASE] |= ((unsigned long long) data) << 32; | |
| } else { | |
| fregs[addr - FPR_BASE] &= ~0xffffffffLL; | |
| fregs[addr - FPR_BASE] |= data; | |
| } | |
| #endif | |
| #ifdef CONFIG_64BIT | |
| fregs[addr - FPR_BASE] = data; | |
| #endif | |
| break; | |
| } | |
| case PC: | |
| regs->cp0_epc = data; | |
| break; | |
| case MMHI: | |
| regs->hi = data; | |
| break; | |
| case MMLO: | |
| regs->lo = data; | |
| break; | |
| #ifdef CONFIG_CPU_HAS_SMARTMIPS | |
| case ACX: | |
| regs->acx = data; | |
| break; | |
| #endif | |
| case FPC_CSR: | |
| child->thread.fpu.fcr31 = data; | |
| break; | |
| case DSP_BASE ... DSP_BASE + 5: { | |
| dspreg_t *dregs; | |
| if (!cpu_has_dsp) { | |
| ret = -EIO; | |
| break; | |
| } | |
| dregs = __get_dsp_regs(child); | |
| dregs[addr - DSP_BASE] = data; | |
| break; | |
| } | |
| case DSP_CONTROL: | |
| if (!cpu_has_dsp) { | |
| ret = -EIO; | |
| break; | |
| } | |
| child->thread.dsp.dspcontrol = data; | |
| break; | |
| default: | |
| /* The rest are not allowed. */ | |
| ret = -EIO; | |
| break; | |
| } | |
| break; | |
| } | |
| case PTRACE_GETREGS: | |
| ret = ptrace_getregs(child, datavp); | |
| break; | |
| case PTRACE_SETREGS: | |
| ret = ptrace_setregs(child, datavp); | |
| break; | |
| case PTRACE_GETFPREGS: | |
| ret = ptrace_getfpregs(child, datavp); | |
| break; | |
| case PTRACE_SETFPREGS: | |
| ret = ptrace_setfpregs(child, datavp); | |
| break; | |
| case PTRACE_GET_THREAD_AREA: | |
| ret = put_user(task_thread_info(child)->tp_value, datalp); | |
| break; | |
| case PTRACE_GET_WATCH_REGS: | |
| ret = ptrace_get_watch_regs(child, addrp); | |
| break; | |
| case PTRACE_SET_WATCH_REGS: | |
| ret = ptrace_set_watch_regs(child, addrp); | |
| break; | |
| default: | |
| ret = ptrace_request(child, request, addr, data); | |
| break; | |
| } | |
| out: | |
| return ret; | |
| } | |
| static inline int audit_arch(void) | |
| { | |
| int arch = EM_MIPS; | |
| #ifdef CONFIG_64BIT | |
| arch |= __AUDIT_ARCH_64BIT; | |
| #endif | |
| #if defined(__LITTLE_ENDIAN) | |
| arch |= __AUDIT_ARCH_LE; | |
| #endif | |
| return arch; | |
| } | |
| /* | |
| * Notification of system call entry/exit | |
| * - triggered by current->work.syscall_trace | |
| */ | |
| asmlinkage void syscall_trace_enter(struct pt_regs *regs) | |
| { | |
| /* do the secure computing check first */ | |
| secure_computing_strict(regs->regs[2]); | |
| if (!(current->ptrace & PT_PTRACED)) | |
| goto out; | |
| if (!test_thread_flag(TIF_SYSCALL_TRACE)) | |
| goto out; | |
| /* The 0x80 provides a way for the tracing parent to distinguish | |
| between a syscall stop and SIGTRAP delivery */ | |
| ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) ? | |
| 0x80 : 0)); | |
| /* | |
| * this isn't the same as continuing with a signal, but it will do | |
| * for normal use. strace only continues with a signal if the | |
| * stopping signal is not SIGTRAP. -brl | |
| */ | |
| if (current->exit_code) { | |
| send_sig(current->exit_code, current, 1); | |
| current->exit_code = 0; | |
| } | |
| out: | |
| audit_syscall_entry(audit_arch(), regs->regs[2], | |
| regs->regs[4], regs->regs[5], | |
| regs->regs[6], regs->regs[7]); | |
| } | |
| /* | |
| * Notification of system call entry/exit | |
| * - triggered by current->work.syscall_trace | |
| */ | |
| asmlinkage void syscall_trace_leave(struct pt_regs *regs) | |
| { | |
| audit_syscall_exit(regs); | |
| if (!(current->ptrace & PT_PTRACED)) | |
| return; | |
| if (!test_thread_flag(TIF_SYSCALL_TRACE)) | |
| return; | |
| /* The 0x80 provides a way for the tracing parent to distinguish | |
| between a syscall stop and SIGTRAP delivery */ | |
| ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) ? | |
| 0x80 : 0)); | |
| /* | |
| * this isn't the same as continuing with a signal, but it will do | |
| * for normal use. strace only continues with a signal if the | |
| * stopping signal is not SIGTRAP. -brl | |
| */ | |
| if (current->exit_code) { | |
| send_sig(current->exit_code, current, 1); | |
| current->exit_code = 0; | |
| } | |
| } |