| /* | |
| * VDSO implementation for AArch64 and vector page setup for AArch32. | |
| * | |
| * Copyright (C) 2012 ARM Limited | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 as | |
| * published by the Free Software Foundation. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program. If not, see <http://www.gnu.org/licenses/>. | |
| * | |
| * Author: Will Deacon <will.deacon@arm.com> | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/clocksource.h> | |
| #include <linux/elf.h> | |
| #include <linux/err.h> | |
| #include <linux/errno.h> | |
| #include <linux/gfp.h> | |
| #include <linux/mm.h> | |
| #include <linux/sched.h> | |
| #include <linux/signal.h> | |
| #include <linux/slab.h> | |
| #include <linux/timekeeper_internal.h> | |
| #include <linux/vmalloc.h> | |
| #include <asm/cacheflush.h> | |
| #include <asm/signal32.h> | |
| #include <asm/vdso.h> | |
| #include <asm/vdso_datapage.h> | |
| extern char vdso_start, vdso_end; | |
| static unsigned long vdso_pages; | |
| static struct page **vdso_pagelist; | |
| /* | |
| * The vDSO data page. | |
| */ | |
| static union { | |
| struct vdso_data data; | |
| u8 page[PAGE_SIZE]; | |
| } vdso_data_store __page_aligned_data; | |
| struct vdso_data *vdso_data = &vdso_data_store.data; | |
| #ifdef CONFIG_COMPAT | |
| /* | |
| * Create and map the vectors page for AArch32 tasks. | |
| */ | |
| static struct page *vectors_page[1]; | |
| static int alloc_vectors_page(void) | |
| { | |
| extern char __kuser_helper_start[], __kuser_helper_end[]; | |
| int kuser_sz = __kuser_helper_end - __kuser_helper_start; | |
| unsigned long vpage; | |
| vpage = get_zeroed_page(GFP_ATOMIC); | |
| if (!vpage) | |
| return -ENOMEM; | |
| /* kuser helpers */ | |
| memcpy((void *)vpage + 0x1000 - kuser_sz, __kuser_helper_start, | |
| kuser_sz); | |
| /* sigreturn code */ | |
| memcpy((void *)vpage + AARCH32_KERN_SIGRET_CODE_OFFSET, | |
| aarch32_sigret_code, sizeof(aarch32_sigret_code)); | |
| flush_icache_range(vpage, vpage + PAGE_SIZE); | |
| vectors_page[0] = virt_to_page(vpage); | |
| return 0; | |
| } | |
| arch_initcall(alloc_vectors_page); | |
| int aarch32_setup_vectors_page(struct linux_binprm *bprm, int uses_interp) | |
| { | |
| struct mm_struct *mm = current->mm; | |
| unsigned long addr = AARCH32_VECTORS_BASE; | |
| int ret; | |
| down_write(&mm->mmap_sem); | |
| current->mm->context.vdso = (void *)addr; | |
| /* Map vectors page at the high address. */ | |
| ret = install_special_mapping(mm, addr, PAGE_SIZE, | |
| VM_READ|VM_EXEC|VM_MAYREAD|VM_MAYEXEC, | |
| vectors_page); | |
| up_write(&mm->mmap_sem); | |
| return ret; | |
| } | |
| #endif /* CONFIG_COMPAT */ | |
| static int __init vdso_init(void) | |
| { | |
| struct page *pg; | |
| char *vbase; | |
| int i, ret = 0; | |
| vdso_pages = (&vdso_end - &vdso_start) >> PAGE_SHIFT; | |
| pr_info("vdso: %ld pages (%ld code, %ld data) at base %p\n", | |
| vdso_pages + 1, vdso_pages, 1L, &vdso_start); | |
| /* Allocate the vDSO pagelist, plus a page for the data. */ | |
| vdso_pagelist = kzalloc(sizeof(struct page *) * (vdso_pages + 1), | |
| GFP_KERNEL); | |
| if (vdso_pagelist == NULL) { | |
| pr_err("Failed to allocate vDSO pagelist!\n"); | |
| return -ENOMEM; | |
| } | |
| /* Grab the vDSO code pages. */ | |
| for (i = 0; i < vdso_pages; i++) { | |
| pg = virt_to_page(&vdso_start + i*PAGE_SIZE); | |
| ClearPageReserved(pg); | |
| get_page(pg); | |
| vdso_pagelist[i] = pg; | |
| } | |
| /* Sanity check the shared object header. */ | |
| vbase = vmap(vdso_pagelist, 1, 0, PAGE_KERNEL); | |
| if (vbase == NULL) { | |
| pr_err("Failed to map vDSO pagelist!\n"); | |
| return -ENOMEM; | |
| } else if (memcmp(vbase, "\177ELF", 4)) { | |
| pr_err("vDSO is not a valid ELF object!\n"); | |
| ret = -EINVAL; | |
| goto unmap; | |
| } | |
| /* Grab the vDSO data page. */ | |
| pg = virt_to_page(vdso_data); | |
| get_page(pg); | |
| vdso_pagelist[i] = pg; | |
| unmap: | |
| vunmap(vbase); | |
| return ret; | |
| } | |
| arch_initcall(vdso_init); | |
| int arch_setup_additional_pages(struct linux_binprm *bprm, | |
| int uses_interp) | |
| { | |
| struct mm_struct *mm = current->mm; | |
| unsigned long vdso_base, vdso_mapping_len; | |
| int ret; | |
| /* Be sure to map the data page */ | |
| vdso_mapping_len = (vdso_pages + 1) << PAGE_SHIFT; | |
| down_write(&mm->mmap_sem); | |
| vdso_base = get_unmapped_area(NULL, 0, vdso_mapping_len, 0, 0); | |
| if (IS_ERR_VALUE(vdso_base)) { | |
| ret = vdso_base; | |
| goto up_fail; | |
| } | |
| mm->context.vdso = (void *)vdso_base; | |
| ret = install_special_mapping(mm, vdso_base, vdso_mapping_len, | |
| VM_READ|VM_EXEC| | |
| VM_MAYREAD|VM_MAYWRITE|VM_MAYEXEC, | |
| vdso_pagelist); | |
| if (ret) { | |
| mm->context.vdso = NULL; | |
| goto up_fail; | |
| } | |
| up_fail: | |
| up_write(&mm->mmap_sem); | |
| return ret; | |
| } | |
| const char *arch_vma_name(struct vm_area_struct *vma) | |
| { | |
| /* | |
| * We can re-use the vdso pointer in mm_context_t for identifying | |
| * the vectors page for compat applications. The vDSO will always | |
| * sit above TASK_UNMAPPED_BASE and so we don't need to worry about | |
| * it conflicting with the vectors base. | |
| */ | |
| if (vma->vm_mm && vma->vm_start == (long)vma->vm_mm->context.vdso) { | |
| #ifdef CONFIG_COMPAT | |
| if (vma->vm_start == AARCH32_VECTORS_BASE) | |
| return "[vectors]"; | |
| #endif | |
| return "[vdso]"; | |
| } | |
| return NULL; | |
| } | |
| /* | |
| * We define AT_SYSINFO_EHDR, so we need these function stubs to keep | |
| * Linux happy. | |
| */ | |
| int in_gate_area_no_mm(unsigned long addr) | |
| { | |
| return 0; | |
| } | |
| int in_gate_area(struct mm_struct *mm, unsigned long addr) | |
| { | |
| return 0; | |
| } | |
| struct vm_area_struct *get_gate_vma(struct mm_struct *mm) | |
| { | |
| return NULL; | |
| } | |
| /* | |
| * Update the vDSO data page to keep in sync with kernel timekeeping. | |
| */ | |
| void update_vsyscall(struct timekeeper *tk) | |
| { | |
| struct timespec xtime_coarse; | |
| u32 use_syscall = strcmp(tk->clock->name, "arch_sys_counter"); | |
| ++vdso_data->tb_seq_count; | |
| smp_wmb(); | |
| xtime_coarse = __current_kernel_time(); | |
| vdso_data->use_syscall = use_syscall; | |
| vdso_data->xtime_coarse_sec = xtime_coarse.tv_sec; | |
| vdso_data->xtime_coarse_nsec = xtime_coarse.tv_nsec; | |
| if (!use_syscall) { | |
| vdso_data->cs_cycle_last = tk->clock->cycle_last; | |
| vdso_data->xtime_clock_sec = tk->xtime_sec; | |
| vdso_data->xtime_clock_nsec = tk->xtime_nsec; | |
| vdso_data->cs_mult = tk->mult; | |
| vdso_data->cs_shift = tk->shift; | |
| vdso_data->wtm_clock_sec = tk->wall_to_monotonic.tv_sec; | |
| vdso_data->wtm_clock_nsec = tk->wall_to_monotonic.tv_nsec; | |
| } | |
| smp_wmb(); | |
| ++vdso_data->tb_seq_count; | |
| } | |
| void update_vsyscall_tz(void) | |
| { | |
| vdso_data->tz_minuteswest = sys_tz.tz_minuteswest; | |
| vdso_data->tz_dsttime = sys_tz.tz_dsttime; | |
| } |