| /* | |
| * drivers/input/tablet/wacom_wac.c | |
| * | |
| * USB Wacom tablet support - Wacom specific code | |
| * | |
| */ | |
| /* | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| */ | |
| #include "wacom_wac.h" | |
| #include "wacom.h" | |
| #include <linux/input/mt.h> | |
| /* resolution for penabled devices */ | |
| #define WACOM_PL_RES 20 | |
| #define WACOM_PENPRTN_RES 40 | |
| #define WACOM_VOLITO_RES 50 | |
| #define WACOM_GRAPHIRE_RES 80 | |
| #define WACOM_INTUOS_RES 100 | |
| #define WACOM_INTUOS3_RES 200 | |
| static int wacom_penpartner_irq(struct wacom_wac *wacom) | |
| { | |
| unsigned char *data = wacom->data; | |
| struct input_dev *input = wacom->input; | |
| switch (data[0]) { | |
| case 1: | |
| if (data[5] & 0x80) { | |
| wacom->tool[0] = (data[5] & 0x20) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN; | |
| wacom->id[0] = (data[5] & 0x20) ? ERASER_DEVICE_ID : STYLUS_DEVICE_ID; | |
| input_report_key(input, wacom->tool[0], 1); | |
| input_report_abs(input, ABS_MISC, wacom->id[0]); /* report tool id */ | |
| input_report_abs(input, ABS_X, get_unaligned_le16(&data[1])); | |
| input_report_abs(input, ABS_Y, get_unaligned_le16(&data[3])); | |
| input_report_abs(input, ABS_PRESSURE, (signed char)data[6] + 127); | |
| input_report_key(input, BTN_TOUCH, ((signed char)data[6] > -127)); | |
| input_report_key(input, BTN_STYLUS, (data[5] & 0x40)); | |
| } else { | |
| input_report_key(input, wacom->tool[0], 0); | |
| input_report_abs(input, ABS_MISC, 0); /* report tool id */ | |
| input_report_abs(input, ABS_PRESSURE, -1); | |
| input_report_key(input, BTN_TOUCH, 0); | |
| } | |
| break; | |
| case 2: | |
| input_report_key(input, BTN_TOOL_PEN, 1); | |
| input_report_abs(input, ABS_MISC, STYLUS_DEVICE_ID); /* report tool id */ | |
| input_report_abs(input, ABS_X, get_unaligned_le16(&data[1])); | |
| input_report_abs(input, ABS_Y, get_unaligned_le16(&data[3])); | |
| input_report_abs(input, ABS_PRESSURE, (signed char)data[6] + 127); | |
| input_report_key(input, BTN_TOUCH, ((signed char)data[6] > -80) && !(data[5] & 0x20)); | |
| input_report_key(input, BTN_STYLUS, (data[5] & 0x40)); | |
| break; | |
| default: | |
| printk(KERN_INFO "wacom_penpartner_irq: received unknown report #%d\n", data[0]); | |
| return 0; | |
| } | |
| return 1; | |
| } | |
| static int wacom_pl_irq(struct wacom_wac *wacom) | |
| { | |
| struct wacom_features *features = &wacom->features; | |
| unsigned char *data = wacom->data; | |
| struct input_dev *input = wacom->input; | |
| int prox, pressure; | |
| if (data[0] != WACOM_REPORT_PENABLED) { | |
| dbg("wacom_pl_irq: received unknown report #%d", data[0]); | |
| return 0; | |
| } | |
| prox = data[1] & 0x40; | |
| if (prox) { | |
| wacom->id[0] = ERASER_DEVICE_ID; | |
| pressure = (signed char)((data[7] << 1) | ((data[4] >> 2) & 1)); | |
| if (features->pressure_max > 255) | |
| pressure = (pressure << 1) | ((data[4] >> 6) & 1); | |
| pressure += (features->pressure_max + 1) / 2; | |
| /* | |
| * if going from out of proximity into proximity select between the eraser | |
| * and the pen based on the state of the stylus2 button, choose eraser if | |
| * pressed else choose pen. if not a proximity change from out to in, send | |
| * an out of proximity for previous tool then a in for new tool. | |
| */ | |
| if (!wacom->tool[0]) { | |
| /* Eraser bit set for DTF */ | |
| if (data[1] & 0x10) | |
| wacom->tool[1] = BTN_TOOL_RUBBER; | |
| else | |
| /* Going into proximity select tool */ | |
| wacom->tool[1] = (data[4] & 0x20) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN; | |
| } else { | |
| /* was entered with stylus2 pressed */ | |
| if (wacom->tool[1] == BTN_TOOL_RUBBER && !(data[4] & 0x20)) { | |
| /* report out proximity for previous tool */ | |
| input_report_key(input, wacom->tool[1], 0); | |
| input_sync(input); | |
| wacom->tool[1] = BTN_TOOL_PEN; | |
| return 0; | |
| } | |
| } | |
| if (wacom->tool[1] != BTN_TOOL_RUBBER) { | |
| /* Unknown tool selected default to pen tool */ | |
| wacom->tool[1] = BTN_TOOL_PEN; | |
| wacom->id[0] = STYLUS_DEVICE_ID; | |
| } | |
| input_report_key(input, wacom->tool[1], prox); /* report in proximity for tool */ | |
| input_report_abs(input, ABS_MISC, wacom->id[0]); /* report tool id */ | |
| input_report_abs(input, ABS_X, data[3] | (data[2] << 7) | ((data[1] & 0x03) << 14)); | |
| input_report_abs(input, ABS_Y, data[6] | (data[5] << 7) | ((data[4] & 0x03) << 14)); | |
| input_report_abs(input, ABS_PRESSURE, pressure); | |
| input_report_key(input, BTN_TOUCH, data[4] & 0x08); | |
| input_report_key(input, BTN_STYLUS, data[4] & 0x10); | |
| /* Only allow the stylus2 button to be reported for the pen tool. */ | |
| input_report_key(input, BTN_STYLUS2, (wacom->tool[1] == BTN_TOOL_PEN) && (data[4] & 0x20)); | |
| } else { | |
| /* report proximity-out of a (valid) tool */ | |
| if (wacom->tool[1] != BTN_TOOL_RUBBER) { | |
| /* Unknown tool selected default to pen tool */ | |
| wacom->tool[1] = BTN_TOOL_PEN; | |
| } | |
| input_report_key(input, wacom->tool[1], prox); | |
| } | |
| wacom->tool[0] = prox; /* Save proximity state */ | |
| return 1; | |
| } | |
| static int wacom_ptu_irq(struct wacom_wac *wacom) | |
| { | |
| unsigned char *data = wacom->data; | |
| struct input_dev *input = wacom->input; | |
| if (data[0] != WACOM_REPORT_PENABLED) { | |
| printk(KERN_INFO "wacom_ptu_irq: received unknown report #%d\n", data[0]); | |
| return 0; | |
| } | |
| if (data[1] & 0x04) { | |
| input_report_key(input, BTN_TOOL_RUBBER, data[1] & 0x20); | |
| input_report_key(input, BTN_TOUCH, data[1] & 0x08); | |
| wacom->id[0] = ERASER_DEVICE_ID; | |
| } else { | |
| input_report_key(input, BTN_TOOL_PEN, data[1] & 0x20); | |
| input_report_key(input, BTN_TOUCH, data[1] & 0x01); | |
| wacom->id[0] = STYLUS_DEVICE_ID; | |
| } | |
| input_report_abs(input, ABS_MISC, wacom->id[0]); /* report tool id */ | |
| input_report_abs(input, ABS_X, le16_to_cpup((__le16 *)&data[2])); | |
| input_report_abs(input, ABS_Y, le16_to_cpup((__le16 *)&data[4])); | |
| input_report_abs(input, ABS_PRESSURE, le16_to_cpup((__le16 *)&data[6])); | |
| input_report_key(input, BTN_STYLUS, data[1] & 0x02); | |
| input_report_key(input, BTN_STYLUS2, data[1] & 0x10); | |
| return 1; | |
| } | |
| static int wacom_dtu_irq(struct wacom_wac *wacom) | |
| { | |
| struct wacom_features *features = &wacom->features; | |
| char *data = wacom->data; | |
| struct input_dev *input = wacom->input; | |
| int prox = data[1] & 0x20, pressure; | |
| dbg("wacom_dtu_irq: received report #%d", data[0]); | |
| if (prox) { | |
| /* Going into proximity select tool */ | |
| wacom->tool[0] = (data[1] & 0x0c) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN; | |
| if (wacom->tool[0] == BTN_TOOL_PEN) | |
| wacom->id[0] = STYLUS_DEVICE_ID; | |
| else | |
| wacom->id[0] = ERASER_DEVICE_ID; | |
| } | |
| input_report_key(input, BTN_STYLUS, data[1] & 0x02); | |
| input_report_key(input, BTN_STYLUS2, data[1] & 0x10); | |
| input_report_abs(input, ABS_X, le16_to_cpup((__le16 *)&data[2])); | |
| input_report_abs(input, ABS_Y, le16_to_cpup((__le16 *)&data[4])); | |
| pressure = ((data[7] & 0x01) << 8) | data[6]; | |
| if (pressure < 0) | |
| pressure = features->pressure_max + pressure + 1; | |
| input_report_abs(input, ABS_PRESSURE, pressure); | |
| input_report_key(input, BTN_TOUCH, data[1] & 0x05); | |
| if (!prox) /* out-prox */ | |
| wacom->id[0] = 0; | |
| input_report_key(input, wacom->tool[0], prox); | |
| input_report_abs(input, ABS_MISC, wacom->id[0]); | |
| return 1; | |
| } | |
| static int wacom_graphire_irq(struct wacom_wac *wacom) | |
| { | |
| struct wacom_features *features = &wacom->features; | |
| unsigned char *data = wacom->data; | |
| struct input_dev *input = wacom->input; | |
| int prox; | |
| int rw = 0; | |
| int retval = 0; | |
| if (data[0] != WACOM_REPORT_PENABLED) { | |
| dbg("wacom_graphire_irq: received unknown report #%d", data[0]); | |
| goto exit; | |
| } | |
| prox = data[1] & 0x80; | |
| if (prox || wacom->id[0]) { | |
| if (prox) { | |
| switch ((data[1] >> 5) & 3) { | |
| case 0: /* Pen */ | |
| wacom->tool[0] = BTN_TOOL_PEN; | |
| wacom->id[0] = STYLUS_DEVICE_ID; | |
| break; | |
| case 1: /* Rubber */ | |
| wacom->tool[0] = BTN_TOOL_RUBBER; | |
| wacom->id[0] = ERASER_DEVICE_ID; | |
| break; | |
| case 2: /* Mouse with wheel */ | |
| input_report_key(input, BTN_MIDDLE, data[1] & 0x04); | |
| /* fall through */ | |
| case 3: /* Mouse without wheel */ | |
| wacom->tool[0] = BTN_TOOL_MOUSE; | |
| wacom->id[0] = CURSOR_DEVICE_ID; | |
| break; | |
| } | |
| } | |
| input_report_abs(input, ABS_X, le16_to_cpup((__le16 *)&data[2])); | |
| input_report_abs(input, ABS_Y, le16_to_cpup((__le16 *)&data[4])); | |
| if (wacom->tool[0] != BTN_TOOL_MOUSE) { | |
| input_report_abs(input, ABS_PRESSURE, data[6] | ((data[7] & 0x01) << 8)); | |
| input_report_key(input, BTN_TOUCH, data[1] & 0x01); | |
| input_report_key(input, BTN_STYLUS, data[1] & 0x02); | |
| input_report_key(input, BTN_STYLUS2, data[1] & 0x04); | |
| } else { | |
| input_report_key(input, BTN_LEFT, data[1] & 0x01); | |
| input_report_key(input, BTN_RIGHT, data[1] & 0x02); | |
| if (features->type == WACOM_G4 || | |
| features->type == WACOM_MO) { | |
| input_report_abs(input, ABS_DISTANCE, data[6] & 0x3f); | |
| rw = (data[7] & 0x04) - (data[7] & 0x03); | |
| } else { | |
| input_report_abs(input, ABS_DISTANCE, data[7] & 0x3f); | |
| rw = -(signed char)data[6]; | |
| } | |
| input_report_rel(input, REL_WHEEL, rw); | |
| } | |
| if (!prox) | |
| wacom->id[0] = 0; | |
| input_report_abs(input, ABS_MISC, wacom->id[0]); /* report tool id */ | |
| input_report_key(input, wacom->tool[0], prox); | |
| input_sync(input); /* sync last event */ | |
| } | |
| /* send pad data */ | |
| switch (features->type) { | |
| case WACOM_G4: | |
| prox = data[7] & 0xf8; | |
| if (prox || wacom->id[1]) { | |
| wacom->id[1] = PAD_DEVICE_ID; | |
| input_report_key(input, BTN_0, (data[7] & 0x40)); | |
| input_report_key(input, BTN_4, (data[7] & 0x80)); | |
| rw = ((data[7] & 0x18) >> 3) - ((data[7] & 0x20) >> 3); | |
| input_report_rel(input, REL_WHEEL, rw); | |
| input_report_key(input, BTN_TOOL_FINGER, 0xf0); | |
| if (!prox) | |
| wacom->id[1] = 0; | |
| input_report_abs(input, ABS_MISC, wacom->id[1]); | |
| input_event(input, EV_MSC, MSC_SERIAL, 0xf0); | |
| retval = 1; | |
| } | |
| break; | |
| case WACOM_MO: | |
| prox = (data[7] & 0xf8) || data[8]; | |
| if (prox || wacom->id[1]) { | |
| wacom->id[1] = PAD_DEVICE_ID; | |
| input_report_key(input, BTN_0, (data[7] & 0x08)); | |
| input_report_key(input, BTN_1, (data[7] & 0x20)); | |
| input_report_key(input, BTN_4, (data[7] & 0x10)); | |
| input_report_key(input, BTN_5, (data[7] & 0x40)); | |
| input_report_abs(input, ABS_WHEEL, (data[8] & 0x7f)); | |
| input_report_key(input, BTN_TOOL_FINGER, 0xf0); | |
| if (!prox) | |
| wacom->id[1] = 0; | |
| input_report_abs(input, ABS_MISC, wacom->id[1]); | |
| input_event(input, EV_MSC, MSC_SERIAL, 0xf0); | |
| } | |
| retval = 1; | |
| break; | |
| } | |
| exit: | |
| return retval; | |
| } | |
| static int wacom_intuos_inout(struct wacom_wac *wacom) | |
| { | |
| struct wacom_features *features = &wacom->features; | |
| unsigned char *data = wacom->data; | |
| struct input_dev *input = wacom->input; | |
| int idx = 0; | |
| /* tool number */ | |
| if (features->type == INTUOS) | |
| idx = data[1] & 0x01; | |
| /* Enter report */ | |
| if ((data[1] & 0xfc) == 0xc0) { | |
| /* serial number of the tool */ | |
| wacom->serial[idx] = ((data[3] & 0x0f) << 28) + | |
| (data[4] << 20) + (data[5] << 12) + | |
| (data[6] << 4) + (data[7] >> 4); | |
| wacom->id[idx] = (data[2] << 4) | (data[3] >> 4) | | |
| ((data[7] & 0x0f) << 20) | ((data[8] & 0xf0) << 12); | |
| switch (wacom->id[idx] & 0xfffff) { | |
| case 0x812: /* Inking pen */ | |
| case 0x801: /* Intuos3 Inking pen */ | |
| case 0x20802: /* Intuos4 Inking Pen */ | |
| case 0x012: | |
| wacom->tool[idx] = BTN_TOOL_PENCIL; | |
| break; | |
| case 0x822: /* Pen */ | |
| case 0x842: | |
| case 0x852: | |
| case 0x823: /* Intuos3 Grip Pen */ | |
| case 0x813: /* Intuos3 Classic Pen */ | |
| case 0x885: /* Intuos3 Marker Pen */ | |
| case 0x802: /* Intuos4 General Pen */ | |
| case 0x804: /* Intuos4 Marker Pen */ | |
| case 0x40802: /* Intuos4 Classic Pen */ | |
| case 0x022: | |
| wacom->tool[idx] = BTN_TOOL_PEN; | |
| break; | |
| case 0x832: /* Stroke pen */ | |
| case 0x032: | |
| wacom->tool[idx] = BTN_TOOL_BRUSH; | |
| break; | |
| case 0x007: /* Mouse 4D and 2D */ | |
| case 0x09c: | |
| case 0x094: | |
| case 0x017: /* Intuos3 2D Mouse */ | |
| case 0x806: /* Intuos4 Mouse */ | |
| wacom->tool[idx] = BTN_TOOL_MOUSE; | |
| break; | |
| case 0x096: /* Lens cursor */ | |
| case 0x097: /* Intuos3 Lens cursor */ | |
| case 0x006: /* Intuos4 Lens cursor */ | |
| wacom->tool[idx] = BTN_TOOL_LENS; | |
| break; | |
| case 0x82a: /* Eraser */ | |
| case 0x85a: | |
| case 0x91a: | |
| case 0xd1a: | |
| case 0x0fa: | |
| case 0x82b: /* Intuos3 Grip Pen Eraser */ | |
| case 0x81b: /* Intuos3 Classic Pen Eraser */ | |
| case 0x91b: /* Intuos3 Airbrush Eraser */ | |
| case 0x80c: /* Intuos4 Marker Pen Eraser */ | |
| case 0x80a: /* Intuos4 General Pen Eraser */ | |
| case 0x4080a: /* Intuos4 Classic Pen Eraser */ | |
| case 0x90a: /* Intuos4 Airbrush Eraser */ | |
| wacom->tool[idx] = BTN_TOOL_RUBBER; | |
| break; | |
| case 0xd12: | |
| case 0x912: | |
| case 0x112: | |
| case 0x913: /* Intuos3 Airbrush */ | |
| case 0x902: /* Intuos4 Airbrush */ | |
| wacom->tool[idx] = BTN_TOOL_AIRBRUSH; | |
| break; | |
| default: /* Unknown tool */ | |
| wacom->tool[idx] = BTN_TOOL_PEN; | |
| break; | |
| } | |
| return 1; | |
| } | |
| /* older I4 styli don't work with new Cintiqs */ | |
| if (!((wacom->id[idx] >> 20) & 0x01) && | |
| (features->type == WACOM_21UX2)) | |
| return 1; | |
| /* Exit report */ | |
| if ((data[1] & 0xfe) == 0x80) { | |
| /* | |
| * Reset all states otherwise we lose the initial states | |
| * when in-prox next time | |
| */ | |
| input_report_abs(input, ABS_X, 0); | |
| input_report_abs(input, ABS_Y, 0); | |
| input_report_abs(input, ABS_DISTANCE, 0); | |
| input_report_abs(input, ABS_TILT_X, 0); | |
| input_report_abs(input, ABS_TILT_Y, 0); | |
| if (wacom->tool[idx] >= BTN_TOOL_MOUSE) { | |
| input_report_key(input, BTN_LEFT, 0); | |
| input_report_key(input, BTN_MIDDLE, 0); | |
| input_report_key(input, BTN_RIGHT, 0); | |
| input_report_key(input, BTN_SIDE, 0); | |
| input_report_key(input, BTN_EXTRA, 0); | |
| input_report_abs(input, ABS_THROTTLE, 0); | |
| input_report_abs(input, ABS_RZ, 0); | |
| } else { | |
| input_report_abs(input, ABS_PRESSURE, 0); | |
| input_report_key(input, BTN_STYLUS, 0); | |
| input_report_key(input, BTN_STYLUS2, 0); | |
| input_report_key(input, BTN_TOUCH, 0); | |
| input_report_abs(input, ABS_WHEEL, 0); | |
| if (features->type >= INTUOS3S) | |
| input_report_abs(input, ABS_Z, 0); | |
| } | |
| input_report_key(input, wacom->tool[idx], 0); | |
| input_report_abs(input, ABS_MISC, 0); /* reset tool id */ | |
| input_event(input, EV_MSC, MSC_SERIAL, wacom->serial[idx]); | |
| wacom->id[idx] = 0; | |
| return 2; | |
| } | |
| return 0; | |
| } | |
| static void wacom_intuos_general(struct wacom_wac *wacom) | |
| { | |
| struct wacom_features *features = &wacom->features; | |
| unsigned char *data = wacom->data; | |
| struct input_dev *input = wacom->input; | |
| unsigned int t; | |
| /* general pen packet */ | |
| if ((data[1] & 0xb8) == 0xa0) { | |
| t = (data[6] << 2) | ((data[7] >> 6) & 3); | |
| if ((features->type >= INTUOS4S && features->type <= INTUOS4L) || | |
| features->type == WACOM_21UX2) { | |
| t = (t << 1) | (data[1] & 1); | |
| } | |
| input_report_abs(input, ABS_PRESSURE, t); | |
| input_report_abs(input, ABS_TILT_X, | |
| ((data[7] << 1) & 0x7e) | (data[8] >> 7)); | |
| input_report_abs(input, ABS_TILT_Y, data[8] & 0x7f); | |
| input_report_key(input, BTN_STYLUS, data[1] & 2); | |
| input_report_key(input, BTN_STYLUS2, data[1] & 4); | |
| input_report_key(input, BTN_TOUCH, t > 10); | |
| } | |
| /* airbrush second packet */ | |
| if ((data[1] & 0xbc) == 0xb4) { | |
| input_report_abs(input, ABS_WHEEL, | |
| (data[6] << 2) | ((data[7] >> 6) & 3)); | |
| input_report_abs(input, ABS_TILT_X, | |
| ((data[7] << 1) & 0x7e) | (data[8] >> 7)); | |
| input_report_abs(input, ABS_TILT_Y, data[8] & 0x7f); | |
| } | |
| } | |
| static int wacom_intuos_irq(struct wacom_wac *wacom) | |
| { | |
| struct wacom_features *features = &wacom->features; | |
| unsigned char *data = wacom->data; | |
| struct input_dev *input = wacom->input; | |
| unsigned int t; | |
| int idx = 0, result; | |
| if (data[0] != WACOM_REPORT_PENABLED && data[0] != WACOM_REPORT_INTUOSREAD | |
| && data[0] != WACOM_REPORT_INTUOSWRITE && data[0] != WACOM_REPORT_INTUOSPAD) { | |
| dbg("wacom_intuos_irq: received unknown report #%d", data[0]); | |
| return 0; | |
| } | |
| /* tool number */ | |
| if (features->type == INTUOS) | |
| idx = data[1] & 0x01; | |
| /* pad packets. Works as a second tool and is always in prox */ | |
| if (data[0] == WACOM_REPORT_INTUOSPAD) { | |
| /* initiate the pad as a device */ | |
| if (wacom->tool[1] != BTN_TOOL_FINGER) | |
| wacom->tool[1] = BTN_TOOL_FINGER; | |
| if (features->type >= INTUOS4S && features->type <= INTUOS4L) { | |
| input_report_key(input, BTN_0, (data[2] & 0x01)); | |
| input_report_key(input, BTN_1, (data[3] & 0x01)); | |
| input_report_key(input, BTN_2, (data[3] & 0x02)); | |
| input_report_key(input, BTN_3, (data[3] & 0x04)); | |
| input_report_key(input, BTN_4, (data[3] & 0x08)); | |
| input_report_key(input, BTN_5, (data[3] & 0x10)); | |
| input_report_key(input, BTN_6, (data[3] & 0x20)); | |
| if (data[1] & 0x80) { | |
| input_report_abs(input, ABS_WHEEL, (data[1] & 0x7f)); | |
| } else { | |
| /* Out of proximity, clear wheel value. */ | |
| input_report_abs(input, ABS_WHEEL, 0); | |
| } | |
| if (features->type != INTUOS4S) { | |
| input_report_key(input, BTN_7, (data[3] & 0x40)); | |
| input_report_key(input, BTN_8, (data[3] & 0x80)); | |
| } | |
| if (data[1] | (data[2] & 0x01) | data[3]) { | |
| input_report_key(input, wacom->tool[1], 1); | |
| input_report_abs(input, ABS_MISC, PAD_DEVICE_ID); | |
| } else { | |
| input_report_key(input, wacom->tool[1], 0); | |
| input_report_abs(input, ABS_MISC, 0); | |
| } | |
| } else { | |
| if (features->type == WACOM_21UX2) { | |
| input_report_key(input, BTN_0, (data[5] & 0x01)); | |
| input_report_key(input, BTN_1, (data[6] & 0x01)); | |
| input_report_key(input, BTN_2, (data[6] & 0x02)); | |
| input_report_key(input, BTN_3, (data[6] & 0x04)); | |
| input_report_key(input, BTN_4, (data[6] & 0x08)); | |
| input_report_key(input, BTN_5, (data[6] & 0x10)); | |
| input_report_key(input, BTN_6, (data[6] & 0x20)); | |
| input_report_key(input, BTN_7, (data[6] & 0x40)); | |
| input_report_key(input, BTN_8, (data[6] & 0x80)); | |
| input_report_key(input, BTN_9, (data[7] & 0x01)); | |
| input_report_key(input, BTN_A, (data[8] & 0x01)); | |
| input_report_key(input, BTN_B, (data[8] & 0x02)); | |
| input_report_key(input, BTN_C, (data[8] & 0x04)); | |
| input_report_key(input, BTN_X, (data[8] & 0x08)); | |
| input_report_key(input, BTN_Y, (data[8] & 0x10)); | |
| input_report_key(input, BTN_Z, (data[8] & 0x20)); | |
| input_report_key(input, BTN_BASE, (data[8] & 0x40)); | |
| input_report_key(input, BTN_BASE2, (data[8] & 0x80)); | |
| } else { | |
| input_report_key(input, BTN_0, (data[5] & 0x01)); | |
| input_report_key(input, BTN_1, (data[5] & 0x02)); | |
| input_report_key(input, BTN_2, (data[5] & 0x04)); | |
| input_report_key(input, BTN_3, (data[5] & 0x08)); | |
| input_report_key(input, BTN_4, (data[6] & 0x01)); | |
| input_report_key(input, BTN_5, (data[6] & 0x02)); | |
| input_report_key(input, BTN_6, (data[6] & 0x04)); | |
| input_report_key(input, BTN_7, (data[6] & 0x08)); | |
| input_report_key(input, BTN_8, (data[5] & 0x10)); | |
| input_report_key(input, BTN_9, (data[6] & 0x10)); | |
| } | |
| input_report_abs(input, ABS_RX, ((data[1] & 0x1f) << 8) | data[2]); | |
| input_report_abs(input, ABS_RY, ((data[3] & 0x1f) << 8) | data[4]); | |
| if ((data[5] & 0x1f) | data[6] | (data[1] & 0x1f) | | |
| data[2] | (data[3] & 0x1f) | data[4] | data[8] | | |
| (data[7] & 0x01)) { | |
| input_report_key(input, wacom->tool[1], 1); | |
| input_report_abs(input, ABS_MISC, PAD_DEVICE_ID); | |
| } else { | |
| input_report_key(input, wacom->tool[1], 0); | |
| input_report_abs(input, ABS_MISC, 0); | |
| } | |
| } | |
| input_event(input, EV_MSC, MSC_SERIAL, 0xffffffff); | |
| return 1; | |
| } | |
| /* process in/out prox events */ | |
| result = wacom_intuos_inout(wacom); | |
| if (result) | |
| return result - 1; | |
| /* don't proceed if we don't know the ID */ | |
| if (!wacom->id[idx]) | |
| return 0; | |
| /* Only large Intuos support Lense Cursor */ | |
| if (wacom->tool[idx] == BTN_TOOL_LENS && | |
| (features->type == INTUOS3 || | |
| features->type == INTUOS3S || | |
| features->type == INTUOS4 || | |
| features->type == INTUOS4S)) { | |
| return 0; | |
| } | |
| /* Cintiq doesn't send data when RDY bit isn't set */ | |
| if (features->type == CINTIQ && !(data[1] & 0x40)) | |
| return 0; | |
| if (features->type >= INTUOS3S) { | |
| input_report_abs(input, ABS_X, (data[2] << 9) | (data[3] << 1) | ((data[9] >> 1) & 1)); | |
| input_report_abs(input, ABS_Y, (data[4] << 9) | (data[5] << 1) | (data[9] & 1)); | |
| input_report_abs(input, ABS_DISTANCE, ((data[9] >> 2) & 0x3f)); | |
| } else { | |
| input_report_abs(input, ABS_X, be16_to_cpup((__be16 *)&data[2])); | |
| input_report_abs(input, ABS_Y, be16_to_cpup((__be16 *)&data[4])); | |
| input_report_abs(input, ABS_DISTANCE, ((data[9] >> 3) & 0x1f)); | |
| } | |
| /* process general packets */ | |
| wacom_intuos_general(wacom); | |
| /* 4D mouse, 2D mouse, marker pen rotation, tilt mouse, or Lens cursor packets */ | |
| if ((data[1] & 0xbc) == 0xa8 || (data[1] & 0xbe) == 0xb0 || (data[1] & 0xbc) == 0xac) { | |
| if (data[1] & 0x02) { | |
| /* Rotation packet */ | |
| if (features->type >= INTUOS3S) { | |
| /* I3 marker pen rotation */ | |
| t = (data[6] << 3) | ((data[7] >> 5) & 7); | |
| t = (data[7] & 0x20) ? ((t > 900) ? ((t-1) / 2 - 1350) : | |
| ((t-1) / 2 + 450)) : (450 - t / 2) ; | |
| input_report_abs(input, ABS_Z, t); | |
| } else { | |
| /* 4D mouse rotation packet */ | |
| t = (data[6] << 3) | ((data[7] >> 5) & 7); | |
| input_report_abs(input, ABS_RZ, (data[7] & 0x20) ? | |
| ((t - 1) / 2) : -t / 2); | |
| } | |
| } else if (!(data[1] & 0x10) && features->type < INTUOS3S) { | |
| /* 4D mouse packet */ | |
| input_report_key(input, BTN_LEFT, data[8] & 0x01); | |
| input_report_key(input, BTN_MIDDLE, data[8] & 0x02); | |
| input_report_key(input, BTN_RIGHT, data[8] & 0x04); | |
| input_report_key(input, BTN_SIDE, data[8] & 0x20); | |
| input_report_key(input, BTN_EXTRA, data[8] & 0x10); | |
| t = (data[6] << 2) | ((data[7] >> 6) & 3); | |
| input_report_abs(input, ABS_THROTTLE, (data[8] & 0x08) ? -t : t); | |
| } else if (wacom->tool[idx] == BTN_TOOL_MOUSE) { | |
| /* I4 mouse */ | |
| if (features->type >= INTUOS4S && features->type <= INTUOS4L) { | |
| input_report_key(input, BTN_LEFT, data[6] & 0x01); | |
| input_report_key(input, BTN_MIDDLE, data[6] & 0x02); | |
| input_report_key(input, BTN_RIGHT, data[6] & 0x04); | |
| input_report_rel(input, REL_WHEEL, ((data[7] & 0x80) >> 7) | |
| - ((data[7] & 0x40) >> 6)); | |
| input_report_key(input, BTN_SIDE, data[6] & 0x08); | |
| input_report_key(input, BTN_EXTRA, data[6] & 0x10); | |
| input_report_abs(input, ABS_TILT_X, | |
| ((data[7] << 1) & 0x7e) | (data[8] >> 7)); | |
| input_report_abs(input, ABS_TILT_Y, data[8] & 0x7f); | |
| } else { | |
| /* 2D mouse packet */ | |
| input_report_key(input, BTN_LEFT, data[8] & 0x04); | |
| input_report_key(input, BTN_MIDDLE, data[8] & 0x08); | |
| input_report_key(input, BTN_RIGHT, data[8] & 0x10); | |
| input_report_rel(input, REL_WHEEL, (data[8] & 0x01) | |
| - ((data[8] & 0x02) >> 1)); | |
| /* I3 2D mouse side buttons */ | |
| if (features->type >= INTUOS3S && features->type <= INTUOS3L) { | |
| input_report_key(input, BTN_SIDE, data[8] & 0x40); | |
| input_report_key(input, BTN_EXTRA, data[8] & 0x20); | |
| } | |
| } | |
| } else if ((features->type < INTUOS3S || features->type == INTUOS3L || | |
| features->type == INTUOS4L) && | |
| wacom->tool[idx] == BTN_TOOL_LENS) { | |
| /* Lens cursor packets */ | |
| input_report_key(input, BTN_LEFT, data[8] & 0x01); | |
| input_report_key(input, BTN_MIDDLE, data[8] & 0x02); | |
| input_report_key(input, BTN_RIGHT, data[8] & 0x04); | |
| input_report_key(input, BTN_SIDE, data[8] & 0x10); | |
| input_report_key(input, BTN_EXTRA, data[8] & 0x08); | |
| } | |
| } | |
| input_report_abs(input, ABS_MISC, wacom->id[idx]); /* report tool id */ | |
| input_report_key(input, wacom->tool[idx], 1); | |
| input_event(input, EV_MSC, MSC_SERIAL, wacom->serial[idx]); | |
| return 1; | |
| } | |
| static int wacom_tpc_mt_touch(struct wacom_wac *wacom) | |
| { | |
| struct input_dev *input = wacom->input; | |
| unsigned char *data = wacom->data; | |
| int contact_with_no_pen_down_count = 0; | |
| int i; | |
| for (i = 0; i < 2; i++) { | |
| int p = data[1] & (1 << i); | |
| bool touch = p && !wacom->shared->stylus_in_proximity; | |
| input_mt_slot(input, i); | |
| input_mt_report_slot_state(input, MT_TOOL_FINGER, touch); | |
| if (touch) { | |
| int x = le16_to_cpup((__le16 *)&data[i * 2 + 2]) & 0x7fff; | |
| int y = le16_to_cpup((__le16 *)&data[i * 2 + 6]) & 0x7fff; | |
| input_report_abs(input, ABS_MT_POSITION_X, x); | |
| input_report_abs(input, ABS_MT_POSITION_Y, y); | |
| contact_with_no_pen_down_count++; | |
| } | |
| } | |
| /* keep touch state for pen event */ | |
| wacom->shared->touch_down = (contact_with_no_pen_down_count > 0); | |
| input_mt_report_pointer_emulation(input, true); | |
| return 1; | |
| } | |
| static int wacom_tpc_single_touch(struct wacom_wac *wacom, size_t len) | |
| { | |
| char *data = wacom->data; | |
| struct input_dev *input = wacom->input; | |
| bool prox; | |
| int x = 0, y = 0; | |
| if (!wacom->shared->stylus_in_proximity) { | |
| if (len == WACOM_PKGLEN_TPC1FG) { | |
| prox = data[0] & 0x01; | |
| x = get_unaligned_le16(&data[1]); | |
| y = get_unaligned_le16(&data[3]); | |
| } else { /* with capacity */ | |
| prox = data[1] & 0x01; | |
| x = le16_to_cpup((__le16 *)&data[2]); | |
| y = le16_to_cpup((__le16 *)&data[4]); | |
| } | |
| } else | |
| /* force touch out when pen is in prox */ | |
| prox = 0; | |
| if (prox) { | |
| input_report_abs(input, ABS_X, x); | |
| input_report_abs(input, ABS_Y, y); | |
| } | |
| input_report_key(input, BTN_TOUCH, prox); | |
| /* keep touch state for pen events */ | |
| wacom->shared->touch_down = prox; | |
| return 1; | |
| } | |
| static int wacom_tpc_pen(struct wacom_wac *wacom) | |
| { | |
| struct wacom_features *features = &wacom->features; | |
| char *data = wacom->data; | |
| struct input_dev *input = wacom->input; | |
| int pressure; | |
| bool prox = data[1] & 0x20; | |
| if (!wacom->shared->stylus_in_proximity) /* first in prox */ | |
| /* Going into proximity select tool */ | |
| wacom->tool[0] = (data[1] & 0x0c) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN; | |
| /* keep pen state for touch events */ | |
| wacom->shared->stylus_in_proximity = prox; | |
| /* send pen events only when touch is up or forced out */ | |
| if (!wacom->shared->touch_down) { | |
| input_report_key(input, BTN_STYLUS, data[1] & 0x02); | |
| input_report_key(input, BTN_STYLUS2, data[1] & 0x10); | |
| input_report_abs(input, ABS_X, le16_to_cpup((__le16 *)&data[2])); | |
| input_report_abs(input, ABS_Y, le16_to_cpup((__le16 *)&data[4])); | |
| pressure = ((data[7] & 0x01) << 8) | data[6]; | |
| if (pressure < 0) | |
| pressure = features->pressure_max + pressure + 1; | |
| input_report_abs(input, ABS_PRESSURE, pressure); | |
| input_report_key(input, BTN_TOUCH, data[1] & 0x05); | |
| input_report_key(input, wacom->tool[0], prox); | |
| return 1; | |
| } | |
| return 0; | |
| } | |
| static int wacom_tpc_irq(struct wacom_wac *wacom, size_t len) | |
| { | |
| char *data = wacom->data; | |
| dbg("wacom_tpc_irq: received report #%d", data[0]); | |
| if (len == WACOM_PKGLEN_TPC1FG || data[0] == WACOM_REPORT_TPC1FG) | |
| return wacom_tpc_single_touch(wacom, len); | |
| else if (data[0] == WACOM_REPORT_TPC2FG) | |
| return wacom_tpc_mt_touch(wacom); | |
| else if (data[0] == WACOM_REPORT_PENABLED) | |
| return wacom_tpc_pen(wacom); | |
| return 0; | |
| } | |
| static int wacom_bpt_touch(struct wacom_wac *wacom) | |
| { | |
| struct wacom_features *features = &wacom->features; | |
| struct input_dev *input = wacom->input; | |
| unsigned char *data = wacom->data; | |
| int i; | |
| for (i = 0; i < 2; i++) { | |
| int p = data[9 * i + 2]; | |
| bool touch = p && !wacom->shared->stylus_in_proximity; | |
| input_mt_slot(input, i); | |
| input_mt_report_slot_state(input, MT_TOOL_FINGER, touch); | |
| /* | |
| * Touch events need to be disabled while stylus is | |
| * in proximity because user's hand is resting on touchpad | |
| * and sending unwanted events. User expects tablet buttons | |
| * to continue working though. | |
| */ | |
| if (touch) { | |
| int x = get_unaligned_be16(&data[9 * i + 3]) & 0x7ff; | |
| int y = get_unaligned_be16(&data[9 * i + 5]) & 0x7ff; | |
| if (features->quirks & WACOM_QUIRK_BBTOUCH_LOWRES) { | |
| x <<= 5; | |
| y <<= 5; | |
| } | |
| input_report_abs(input, ABS_MT_PRESSURE, p); | |
| input_report_abs(input, ABS_MT_POSITION_X, x); | |
| input_report_abs(input, ABS_MT_POSITION_Y, y); | |
| } | |
| } | |
| input_mt_report_pointer_emulation(input, true); | |
| input_report_key(input, BTN_LEFT, (data[1] & 0x08) != 0); | |
| input_report_key(input, BTN_FORWARD, (data[1] & 0x04) != 0); | |
| input_report_key(input, BTN_BACK, (data[1] & 0x02) != 0); | |
| input_report_key(input, BTN_RIGHT, (data[1] & 0x01) != 0); | |
| input_sync(input); | |
| return 0; | |
| } | |
| static int wacom_bpt_pen(struct wacom_wac *wacom) | |
| { | |
| struct input_dev *input = wacom->input; | |
| unsigned char *data = wacom->data; | |
| int prox = 0, x = 0, y = 0, p = 0, d = 0, pen = 0, btn1 = 0, btn2 = 0; | |
| /* | |
| * Similar to Graphire protocol, data[1] & 0x20 is proximity and | |
| * data[1] & 0x18 is tool ID. 0x30 is safety check to ignore | |
| * 2 unused tool ID's. | |
| */ | |
| prox = (data[1] & 0x30) == 0x30; | |
| /* | |
| * All reports shared between PEN and RUBBER tool must be | |
| * forced to a known starting value (zero) when transitioning to | |
| * out-of-prox. | |
| * | |
| * If not reset then, to userspace, it will look like lost events | |
| * if new tool comes in-prox with same values as previous tool sent. | |
| * | |
| * Hardware does report zero in most out-of-prox cases but not all. | |
| */ | |
| if (prox) { | |
| if (!wacom->shared->stylus_in_proximity) { | |
| if (data[1] & 0x08) { | |
| wacom->tool[0] = BTN_TOOL_RUBBER; | |
| wacom->id[0] = ERASER_DEVICE_ID; | |
| } else { | |
| wacom->tool[0] = BTN_TOOL_PEN; | |
| wacom->id[0] = STYLUS_DEVICE_ID; | |
| } | |
| wacom->shared->stylus_in_proximity = true; | |
| } | |
| x = le16_to_cpup((__le16 *)&data[2]); | |
| y = le16_to_cpup((__le16 *)&data[4]); | |
| p = le16_to_cpup((__le16 *)&data[6]); | |
| d = data[8]; | |
| pen = data[1] & 0x01; | |
| btn1 = data[1] & 0x02; | |
| btn2 = data[1] & 0x04; | |
| } | |
| input_report_key(input, BTN_TOUCH, pen); | |
| input_report_key(input, BTN_STYLUS, btn1); | |
| input_report_key(input, BTN_STYLUS2, btn2); | |
| input_report_abs(input, ABS_X, x); | |
| input_report_abs(input, ABS_Y, y); | |
| input_report_abs(input, ABS_PRESSURE, p); | |
| input_report_abs(input, ABS_DISTANCE, d); | |
| if (!prox) { | |
| wacom->id[0] = 0; | |
| wacom->shared->stylus_in_proximity = false; | |
| } | |
| input_report_key(input, wacom->tool[0], prox); /* PEN or RUBBER */ | |
| input_report_abs(input, ABS_MISC, wacom->id[0]); /* TOOL ID */ | |
| return 1; | |
| } | |
| static int wacom_bpt_irq(struct wacom_wac *wacom, size_t len) | |
| { | |
| if (len == WACOM_PKGLEN_BBTOUCH) | |
| return wacom_bpt_touch(wacom); | |
| else if (len == WACOM_PKGLEN_BBFUN) | |
| return wacom_bpt_pen(wacom); | |
| return 0; | |
| } | |
| void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t len) | |
| { | |
| bool sync; | |
| switch (wacom_wac->features.type) { | |
| case PENPARTNER: | |
| sync = wacom_penpartner_irq(wacom_wac); | |
| break; | |
| case PL: | |
| sync = wacom_pl_irq(wacom_wac); | |
| break; | |
| case WACOM_G4: | |
| case GRAPHIRE: | |
| case WACOM_MO: | |
| sync = wacom_graphire_irq(wacom_wac); | |
| break; | |
| case PTU: | |
| sync = wacom_ptu_irq(wacom_wac); | |
| break; | |
| case DTU: | |
| sync = wacom_dtu_irq(wacom_wac); | |
| break; | |
| case INTUOS: | |
| case INTUOS3S: | |
| case INTUOS3: | |
| case INTUOS3L: | |
| case INTUOS4S: | |
| case INTUOS4: | |
| case INTUOS4L: | |
| case CINTIQ: | |
| case WACOM_BEE: | |
| case WACOM_21UX2: | |
| sync = wacom_intuos_irq(wacom_wac); | |
| break; | |
| case TABLETPC: | |
| case TABLETPC2FG: | |
| sync = wacom_tpc_irq(wacom_wac, len); | |
| break; | |
| case BAMBOO_PT: | |
| sync = wacom_bpt_irq(wacom_wac, len); | |
| break; | |
| default: | |
| sync = false; | |
| break; | |
| } | |
| if (sync) | |
| input_sync(wacom_wac->input); | |
| } | |
| static void wacom_setup_cintiq(struct wacom_wac *wacom_wac) | |
| { | |
| struct input_dev *input_dev = wacom_wac->input; | |
| input_set_capability(input_dev, EV_MSC, MSC_SERIAL); | |
| __set_bit(BTN_TOOL_RUBBER, input_dev->keybit); | |
| __set_bit(BTN_TOOL_PEN, input_dev->keybit); | |
| __set_bit(BTN_TOOL_BRUSH, input_dev->keybit); | |
| __set_bit(BTN_TOOL_PENCIL, input_dev->keybit); | |
| __set_bit(BTN_TOOL_AIRBRUSH, input_dev->keybit); | |
| __set_bit(BTN_STYLUS, input_dev->keybit); | |
| __set_bit(BTN_STYLUS2, input_dev->keybit); | |
| input_set_abs_params(input_dev, ABS_DISTANCE, | |
| 0, wacom_wac->features.distance_max, 0, 0); | |
| input_set_abs_params(input_dev, ABS_WHEEL, 0, 1023, 0, 0); | |
| input_set_abs_params(input_dev, ABS_TILT_X, 0, 127, 0, 0); | |
| input_set_abs_params(input_dev, ABS_TILT_Y, 0, 127, 0, 0); | |
| } | |
| static void wacom_setup_intuos(struct wacom_wac *wacom_wac) | |
| { | |
| struct input_dev *input_dev = wacom_wac->input; | |
| input_set_capability(input_dev, EV_REL, REL_WHEEL); | |
| wacom_setup_cintiq(wacom_wac); | |
| __set_bit(BTN_LEFT, input_dev->keybit); | |
| __set_bit(BTN_RIGHT, input_dev->keybit); | |
| __set_bit(BTN_MIDDLE, input_dev->keybit); | |
| __set_bit(BTN_SIDE, input_dev->keybit); | |
| __set_bit(BTN_EXTRA, input_dev->keybit); | |
| __set_bit(BTN_TOOL_MOUSE, input_dev->keybit); | |
| __set_bit(BTN_TOOL_LENS, input_dev->keybit); | |
| input_set_abs_params(input_dev, ABS_RZ, -900, 899, 0, 0); | |
| input_set_abs_params(input_dev, ABS_THROTTLE, -1023, 1023, 0, 0); | |
| } | |
| void wacom_setup_device_quirks(struct wacom_features *features) | |
| { | |
| /* touch device found but size is not defined. use default */ | |
| if (features->device_type == BTN_TOOL_FINGER && !features->x_max) { | |
| features->x_max = 1023; | |
| features->y_max = 1023; | |
| } | |
| /* these device have multiple inputs */ | |
| if (features->type == TABLETPC || features->type == TABLETPC2FG || | |
| features->type == BAMBOO_PT) | |
| features->quirks |= WACOM_QUIRK_MULTI_INPUT; | |
| /* quirks for bamboo touch */ | |
| if (features->type == BAMBOO_PT && | |
| features->device_type == BTN_TOOL_DOUBLETAP) { | |
| features->x_max <<= 5; | |
| features->y_max <<= 5; | |
| features->x_fuzz <<= 5; | |
| features->y_fuzz <<= 5; | |
| features->pressure_max = 256; | |
| features->pressure_fuzz = 16; | |
| features->quirks |= WACOM_QUIRK_BBTOUCH_LOWRES; | |
| } | |
| } | |
| static unsigned int wacom_calculate_touch_res(unsigned int logical_max, | |
| unsigned int physical_max) | |
| { | |
| /* Touch physical dimensions are in 100th of mm */ | |
| return (logical_max * 100) / physical_max; | |
| } | |
| void wacom_setup_input_capabilities(struct input_dev *input_dev, | |
| struct wacom_wac *wacom_wac) | |
| { | |
| struct wacom_features *features = &wacom_wac->features; | |
| int i; | |
| input_dev->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); | |
| __set_bit(BTN_TOUCH, input_dev->keybit); | |
| input_set_abs_params(input_dev, ABS_X, 0, features->x_max, | |
| features->x_fuzz, 0); | |
| input_set_abs_params(input_dev, ABS_Y, 0, features->y_max, | |
| features->y_fuzz, 0); | |
| input_set_abs_params(input_dev, ABS_PRESSURE, 0, features->pressure_max, | |
| features->pressure_fuzz, 0); | |
| if (features->device_type == BTN_TOOL_PEN) { | |
| /* penabled devices have fixed resolution for each model */ | |
| input_abs_set_res(input_dev, ABS_X, features->x_resolution); | |
| input_abs_set_res(input_dev, ABS_Y, features->y_resolution); | |
| } else { | |
| input_abs_set_res(input_dev, ABS_X, | |
| wacom_calculate_touch_res(features->x_max, | |
| features->x_phy)); | |
| input_abs_set_res(input_dev, ABS_Y, | |
| wacom_calculate_touch_res(features->y_max, | |
| features->y_phy)); | |
| } | |
| __set_bit(ABS_MISC, input_dev->absbit); | |
| switch (wacom_wac->features.type) { | |
| case WACOM_MO: | |
| __set_bit(BTN_1, input_dev->keybit); | |
| __set_bit(BTN_5, input_dev->keybit); | |
| input_set_abs_params(input_dev, ABS_WHEEL, 0, 71, 0, 0); | |
| /* fall through */ | |
| case WACOM_G4: | |
| input_set_capability(input_dev, EV_MSC, MSC_SERIAL); | |
| __set_bit(BTN_TOOL_FINGER, input_dev->keybit); | |
| __set_bit(BTN_0, input_dev->keybit); | |
| __set_bit(BTN_4, input_dev->keybit); | |
| /* fall through */ | |
| case GRAPHIRE: | |
| input_set_capability(input_dev, EV_REL, REL_WHEEL); | |
| __set_bit(BTN_LEFT, input_dev->keybit); | |
| __set_bit(BTN_RIGHT, input_dev->keybit); | |
| __set_bit(BTN_MIDDLE, input_dev->keybit); | |
| __set_bit(BTN_TOOL_RUBBER, input_dev->keybit); | |
| __set_bit(BTN_TOOL_PEN, input_dev->keybit); | |
| __set_bit(BTN_TOOL_MOUSE, input_dev->keybit); | |
| __set_bit(BTN_STYLUS, input_dev->keybit); | |
| __set_bit(BTN_STYLUS2, input_dev->keybit); | |
| break; | |
| case WACOM_21UX2: | |
| __set_bit(BTN_A, input_dev->keybit); | |
| __set_bit(BTN_B, input_dev->keybit); | |
| __set_bit(BTN_C, input_dev->keybit); | |
| __set_bit(BTN_X, input_dev->keybit); | |
| __set_bit(BTN_Y, input_dev->keybit); | |
| __set_bit(BTN_Z, input_dev->keybit); | |
| __set_bit(BTN_BASE, input_dev->keybit); | |
| __set_bit(BTN_BASE2, input_dev->keybit); | |
| /* fall through */ | |
| case WACOM_BEE: | |
| __set_bit(BTN_8, input_dev->keybit); | |
| __set_bit(BTN_9, input_dev->keybit); | |
| /* fall through */ | |
| case CINTIQ: | |
| for (i = 0; i < 8; i++) | |
| __set_bit(BTN_0 + i, input_dev->keybit); | |
| __set_bit(BTN_TOOL_FINGER, input_dev->keybit); | |
| input_set_abs_params(input_dev, ABS_RX, 0, 4096, 0, 0); | |
| input_set_abs_params(input_dev, ABS_RY, 0, 4096, 0, 0); | |
| input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0); | |
| wacom_setup_cintiq(wacom_wac); | |
| break; | |
| case INTUOS3: | |
| case INTUOS3L: | |
| __set_bit(BTN_4, input_dev->keybit); | |
| __set_bit(BTN_5, input_dev->keybit); | |
| __set_bit(BTN_6, input_dev->keybit); | |
| __set_bit(BTN_7, input_dev->keybit); | |
| input_set_abs_params(input_dev, ABS_RY, 0, 4096, 0, 0); | |
| /* fall through */ | |
| case INTUOS3S: | |
| __set_bit(BTN_0, input_dev->keybit); | |
| __set_bit(BTN_1, input_dev->keybit); | |
| __set_bit(BTN_2, input_dev->keybit); | |
| __set_bit(BTN_3, input_dev->keybit); | |
| __set_bit(BTN_TOOL_FINGER, input_dev->keybit); | |
| input_set_abs_params(input_dev, ABS_RX, 0, 4096, 0, 0); | |
| input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0); | |
| /* fall through */ | |
| case INTUOS: | |
| wacom_setup_intuos(wacom_wac); | |
| break; | |
| case INTUOS4: | |
| case INTUOS4L: | |
| __set_bit(BTN_7, input_dev->keybit); | |
| __set_bit(BTN_8, input_dev->keybit); | |
| /* fall through */ | |
| case INTUOS4S: | |
| for (i = 0; i < 7; i++) | |
| __set_bit(BTN_0 + i, input_dev->keybit); | |
| __set_bit(BTN_TOOL_FINGER, input_dev->keybit); | |
| input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0); | |
| wacom_setup_intuos(wacom_wac); | |
| break; | |
| case TABLETPC2FG: | |
| if (features->device_type == BTN_TOOL_DOUBLETAP) { | |
| input_mt_init_slots(input_dev, 2); | |
| input_set_abs_params(input_dev, ABS_MT_TOOL_TYPE, | |
| 0, MT_TOOL_MAX, 0, 0); | |
| input_set_abs_params(input_dev, ABS_MT_POSITION_X, | |
| 0, features->x_max, 0, 0); | |
| input_set_abs_params(input_dev, ABS_MT_POSITION_Y, | |
| 0, features->y_max, 0, 0); | |
| } | |
| /* fall through */ | |
| case TABLETPC: | |
| __clear_bit(ABS_MISC, input_dev->absbit); | |
| if (features->device_type != BTN_TOOL_PEN) | |
| break; /* no need to process stylus stuff */ | |
| /* fall through */ | |
| case PL: | |
| case PTU: | |
| case DTU: | |
| __set_bit(BTN_TOOL_PEN, input_dev->keybit); | |
| __set_bit(BTN_STYLUS, input_dev->keybit); | |
| __set_bit(BTN_STYLUS2, input_dev->keybit); | |
| /* fall through */ | |
| case PENPARTNER: | |
| __set_bit(BTN_TOOL_RUBBER, input_dev->keybit); | |
| break; | |
| case BAMBOO_PT: | |
| __clear_bit(ABS_MISC, input_dev->absbit); | |
| if (features->device_type == BTN_TOOL_DOUBLETAP) { | |
| __set_bit(BTN_LEFT, input_dev->keybit); | |
| __set_bit(BTN_FORWARD, input_dev->keybit); | |
| __set_bit(BTN_BACK, input_dev->keybit); | |
| __set_bit(BTN_RIGHT, input_dev->keybit); | |
| __set_bit(BTN_TOOL_FINGER, input_dev->keybit); | |
| __set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit); | |
| input_mt_init_slots(input_dev, 2); | |
| input_set_abs_params(input_dev, ABS_MT_POSITION_X, | |
| 0, features->x_max, | |
| features->x_fuzz, 0); | |
| input_set_abs_params(input_dev, ABS_MT_POSITION_Y, | |
| 0, features->y_max, | |
| features->y_fuzz, 0); | |
| input_set_abs_params(input_dev, ABS_MT_PRESSURE, | |
| 0, features->pressure_max, | |
| features->pressure_fuzz, 0); | |
| } else if (features->device_type == BTN_TOOL_PEN) { | |
| __set_bit(BTN_TOOL_RUBBER, input_dev->keybit); | |
| __set_bit(BTN_TOOL_PEN, input_dev->keybit); | |
| __set_bit(BTN_STYLUS, input_dev->keybit); | |
| __set_bit(BTN_STYLUS2, input_dev->keybit); | |
| } | |
| break; | |
| } | |
| } | |
| static const struct wacom_features wacom_features_0x00 = | |
| { "Wacom Penpartner", WACOM_PKGLEN_PENPRTN, 5040, 3780, 255, | |
| 0, PENPARTNER, WACOM_PENPRTN_RES, WACOM_PENPRTN_RES }; | |
| static const struct wacom_features wacom_features_0x10 = | |
| { "Wacom Graphire", WACOM_PKGLEN_GRAPHIRE, 10206, 7422, 511, | |
| 63, GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES }; | |
| static const struct wacom_features wacom_features_0x11 = | |
| { "Wacom Graphire2 4x5", WACOM_PKGLEN_GRAPHIRE, 10206, 7422, 511, | |
| 63, GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES }; | |
| static const struct wacom_features wacom_features_0x12 = | |
| { "Wacom Graphire2 5x7", WACOM_PKGLEN_GRAPHIRE, 13918, 10206, 511, | |
| 63, GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES }; | |
| static const struct wacom_features wacom_features_0x13 = | |
| { "Wacom Graphire3", WACOM_PKGLEN_GRAPHIRE, 10208, 7424, 511, | |
| 63, GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES }; | |
| static const struct wacom_features wacom_features_0x14 = | |
| { "Wacom Graphire3 6x8", WACOM_PKGLEN_GRAPHIRE, 16704, 12064, 511, | |
| 63, GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES }; | |
| static const struct wacom_features wacom_features_0x15 = | |
| { "Wacom Graphire4 4x5", WACOM_PKGLEN_GRAPHIRE, 10208, 7424, 511, | |
| 63, WACOM_G4, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES }; | |
| static const struct wacom_features wacom_features_0x16 = | |
| { "Wacom Graphire4 6x8", WACOM_PKGLEN_GRAPHIRE, 16704, 12064, 511, | |
| 63, WACOM_G4, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES }; | |
| static const struct wacom_features wacom_features_0x17 = | |
| { "Wacom BambooFun 4x5", WACOM_PKGLEN_BBFUN, 14760, 9225, 511, | |
| 63, WACOM_MO, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; | |
| static const struct wacom_features wacom_features_0x18 = | |
| { "Wacom BambooFun 6x8", WACOM_PKGLEN_BBFUN, 21648, 13530, 511, | |
| 63, WACOM_MO, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; | |
| static const struct wacom_features wacom_features_0x19 = | |
| { "Wacom Bamboo1 Medium", WACOM_PKGLEN_GRAPHIRE, 16704, 12064, 511, | |
| 63, GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES }; | |
| static const struct wacom_features wacom_features_0x60 = | |
| { "Wacom Volito", WACOM_PKGLEN_GRAPHIRE, 5104, 3712, 511, | |
| 63, GRAPHIRE, WACOM_VOLITO_RES, WACOM_VOLITO_RES }; | |
| static const struct wacom_features wacom_features_0x61 = | |
| { "Wacom PenStation2", WACOM_PKGLEN_GRAPHIRE, 3250, 2320, 255, | |
| 63, GRAPHIRE, WACOM_VOLITO_RES, WACOM_VOLITO_RES }; | |
| static const struct wacom_features wacom_features_0x62 = | |
| { "Wacom Volito2 4x5", WACOM_PKGLEN_GRAPHIRE, 5104, 3712, 511, | |
| 63, GRAPHIRE, WACOM_VOLITO_RES, WACOM_VOLITO_RES }; | |
| static const struct wacom_features wacom_features_0x63 = | |
| { "Wacom Volito2 2x3", WACOM_PKGLEN_GRAPHIRE, 3248, 2320, 511, | |
| 63, GRAPHIRE, WACOM_VOLITO_RES, WACOM_VOLITO_RES }; | |
| static const struct wacom_features wacom_features_0x64 = | |
| { "Wacom PenPartner2", WACOM_PKGLEN_GRAPHIRE, 3250, 2320, 511, | |
| 63, GRAPHIRE, WACOM_VOLITO_RES, WACOM_VOLITO_RES }; | |
| static const struct wacom_features wacom_features_0x65 = | |
| { "Wacom Bamboo", WACOM_PKGLEN_BBFUN, 14760, 9225, 511, | |
| 63, WACOM_MO, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; | |
| static const struct wacom_features wacom_features_0x69 = | |
| { "Wacom Bamboo1", WACOM_PKGLEN_GRAPHIRE, 5104, 3712, 511, | |
| 63, GRAPHIRE, WACOM_PENPRTN_RES, WACOM_PENPRTN_RES }; | |
| static const struct wacom_features wacom_features_0x20 = | |
| { "Wacom Intuos 4x5", WACOM_PKGLEN_INTUOS, 12700, 10600, 1023, | |
| 31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; | |
| static const struct wacom_features wacom_features_0x21 = | |
| { "Wacom Intuos 6x8", WACOM_PKGLEN_INTUOS, 20320, 16240, 1023, | |
| 31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; | |
| static const struct wacom_features wacom_features_0x22 = | |
| { "Wacom Intuos 9x12", WACOM_PKGLEN_INTUOS, 30480, 24060, 1023, | |
| 31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; | |
| static const struct wacom_features wacom_features_0x23 = | |
| { "Wacom Intuos 12x12", WACOM_PKGLEN_INTUOS, 30480, 31680, 1023, | |
| 31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; | |
| static const struct wacom_features wacom_features_0x24 = | |
| { "Wacom Intuos 12x18", WACOM_PKGLEN_INTUOS, 45720, 31680, 1023, | |
| 31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; | |
| static const struct wacom_features wacom_features_0x30 = | |
| { "Wacom PL400", WACOM_PKGLEN_GRAPHIRE, 5408, 4056, 255, | |
| 0, PL, WACOM_PL_RES, WACOM_PL_RES }; | |
| static const struct wacom_features wacom_features_0x31 = | |
| { "Wacom PL500", WACOM_PKGLEN_GRAPHIRE, 6144, 4608, 255, | |
| 0, PL, WACOM_PL_RES, WACOM_PL_RES }; | |
| static const struct wacom_features wacom_features_0x32 = | |
| { "Wacom PL600", WACOM_PKGLEN_GRAPHIRE, 6126, 4604, 255, | |
| 0, PL, WACOM_PL_RES, WACOM_PL_RES }; | |
| static const struct wacom_features wacom_features_0x33 = | |
| { "Wacom PL600SX", WACOM_PKGLEN_GRAPHIRE, 6260, 5016, 255, | |
| 0, PL, WACOM_PL_RES, WACOM_PL_RES }; | |
| static const struct wacom_features wacom_features_0x34 = | |
| { "Wacom PL550", WACOM_PKGLEN_GRAPHIRE, 6144, 4608, 511, | |
| 0, PL, WACOM_PL_RES, WACOM_PL_RES }; | |
| static const struct wacom_features wacom_features_0x35 = | |
| { "Wacom PL800", WACOM_PKGLEN_GRAPHIRE, 7220, 5780, 511, | |
| 0, PL, WACOM_PL_RES, WACOM_PL_RES }; | |
| static const struct wacom_features wacom_features_0x37 = | |
| { "Wacom PL700", WACOM_PKGLEN_GRAPHIRE, 6758, 5406, 511, | |
| 0, PL, WACOM_PL_RES, WACOM_PL_RES }; | |
| static const struct wacom_features wacom_features_0x38 = | |
| { "Wacom PL510", WACOM_PKGLEN_GRAPHIRE, 6282, 4762, 511, | |
| 0, PL, WACOM_PL_RES, WACOM_PL_RES }; | |
| static const struct wacom_features wacom_features_0x39 = | |
| { "Wacom DTU710", WACOM_PKGLEN_GRAPHIRE, 34080, 27660, 511, | |
| 0, PL, WACOM_PL_RES, WACOM_PL_RES }; | |
| static const struct wacom_features wacom_features_0xC4 = | |
| { "Wacom DTF521", WACOM_PKGLEN_GRAPHIRE, 6282, 4762, 511, | |
| 0, PL, WACOM_PL_RES, WACOM_PL_RES }; | |
| static const struct wacom_features wacom_features_0xC0 = | |
| { "Wacom DTF720", WACOM_PKGLEN_GRAPHIRE, 6858, 5506, 511, | |
| 0, PL, WACOM_PL_RES, WACOM_PL_RES }; | |
| static const struct wacom_features wacom_features_0xC2 = | |
| { "Wacom DTF720a", WACOM_PKGLEN_GRAPHIRE, 6858, 5506, 511, | |
| 0, PL, WACOM_PL_RES, WACOM_PL_RES }; | |
| static const struct wacom_features wacom_features_0x03 = | |
| { "Wacom Cintiq Partner", WACOM_PKGLEN_GRAPHIRE, 20480, 15360, 511, | |
| 0, PTU, WACOM_PL_RES, WACOM_PL_RES }; | |
| static const struct wacom_features wacom_features_0x41 = | |
| { "Wacom Intuos2 4x5", WACOM_PKGLEN_INTUOS, 12700, 10600, 1023, | |
| 31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; | |
| static const struct wacom_features wacom_features_0x42 = | |
| { "Wacom Intuos2 6x8", WACOM_PKGLEN_INTUOS, 20320, 16240, 1023, | |
| 31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; | |
| static const struct wacom_features wacom_features_0x43 = | |
| { "Wacom Intuos2 9x12", WACOM_PKGLEN_INTUOS, 30480, 24060, 1023, | |
| 31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; | |
| static const struct wacom_features wacom_features_0x44 = | |
| { "Wacom Intuos2 12x12", WACOM_PKGLEN_INTUOS, 30480, 31680, 1023, | |
| 31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; | |
| static const struct wacom_features wacom_features_0x45 = | |
| { "Wacom Intuos2 12x18", WACOM_PKGLEN_INTUOS, 45720, 31680, 1023, | |
| 31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; | |
| static const struct wacom_features wacom_features_0xB0 = | |
| { "Wacom Intuos3 4x5", WACOM_PKGLEN_INTUOS, 25400, 20320, 1023, | |
| 63, INTUOS3S, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; | |
| static const struct wacom_features wacom_features_0xB1 = | |
| { "Wacom Intuos3 6x8", WACOM_PKGLEN_INTUOS, 40640, 30480, 1023, | |
| 63, INTUOS3, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; | |
| static const struct wacom_features wacom_features_0xB2 = | |
| { "Wacom Intuos3 9x12", WACOM_PKGLEN_INTUOS, 60960, 45720, 1023, | |
| 63, INTUOS3, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; | |
| static const struct wacom_features wacom_features_0xB3 = | |
| { "Wacom Intuos3 12x12", WACOM_PKGLEN_INTUOS, 60960, 60960, 1023, | |
| 63, INTUOS3L, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; | |
| static const struct wacom_features wacom_features_0xB4 = | |
| { "Wacom Intuos3 12x19", WACOM_PKGLEN_INTUOS, 97536, 60960, 1023, | |
| 63, INTUOS3L, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; | |
| static const struct wacom_features wacom_features_0xB5 = | |
| { "Wacom Intuos3 6x11", WACOM_PKGLEN_INTUOS, 54204, 31750, 1023, | |
| 63, INTUOS3, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; | |
| static const struct wacom_features wacom_features_0xB7 = | |
| { "Wacom Intuos3 4x6", WACOM_PKGLEN_INTUOS, 31496, 19685, 1023, | |
| 63, INTUOS3S, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; | |
| static const struct wacom_features wacom_features_0xB8 = | |
| { "Wacom Intuos4 4x6", WACOM_PKGLEN_INTUOS, 31496, 19685, 2047, | |
| 63, INTUOS4S, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; | |
| static const struct wacom_features wacom_features_0xB9 = | |
| { "Wacom Intuos4 6x9", WACOM_PKGLEN_INTUOS, 44704, 27940, 2047, | |
| 63, INTUOS4, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; | |
| static const struct wacom_features wacom_features_0xBA = | |
| { "Wacom Intuos4 8x13", WACOM_PKGLEN_INTUOS, 65024, 40640, 2047, | |
| 63, INTUOS4L, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; | |
| static const struct wacom_features wacom_features_0xBB = | |
| { "Wacom Intuos4 12x19", WACOM_PKGLEN_INTUOS, 97536, 60960, 2047, | |
| 63, INTUOS4L, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; | |
| static const struct wacom_features wacom_features_0xBC = | |
| { "Wacom Intuos4 WL", WACOM_PKGLEN_INTUOS, 40840, 25400, 2047, | |
| 63, INTUOS4, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; | |
| static const struct wacom_features wacom_features_0x3F = | |
| { "Wacom Cintiq 21UX", WACOM_PKGLEN_INTUOS, 87200, 65600, 1023, | |
| 63, CINTIQ, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; | |
| static const struct wacom_features wacom_features_0xC5 = | |
| { "Wacom Cintiq 20WSX", WACOM_PKGLEN_INTUOS, 86680, 54180, 1023, | |
| 63, WACOM_BEE, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; | |
| static const struct wacom_features wacom_features_0xC6 = | |
| { "Wacom Cintiq 12WX", WACOM_PKGLEN_INTUOS, 53020, 33440, 1023, | |
| 63, WACOM_BEE, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; | |
| static const struct wacom_features wacom_features_0xC7 = | |
| { "Wacom DTU1931", WACOM_PKGLEN_GRAPHIRE, 37832, 30305, 511, | |
| 0, PL, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; | |
| static const struct wacom_features wacom_features_0xCE = | |
| { "Wacom DTU2231", WACOM_PKGLEN_GRAPHIRE, 47864, 27011, 511, | |
| 0, DTU, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; | |
| static const struct wacom_features wacom_features_0xF0 = | |
| { "Wacom DTU1631", WACOM_PKGLEN_GRAPHIRE, 34623, 19553, 511, | |
| 0, DTU, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; | |
| static const struct wacom_features wacom_features_0xCC = | |
| { "Wacom Cintiq 21UX2", WACOM_PKGLEN_INTUOS, 87200, 65600, 2047, | |
| 63, WACOM_21UX2, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; | |
| static const struct wacom_features wacom_features_0x90 = | |
| { "Wacom ISDv4 90", WACOM_PKGLEN_GRAPHIRE, 26202, 16325, 255, | |
| 0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; | |
| static const struct wacom_features wacom_features_0x93 = | |
| { "Wacom ISDv4 93", WACOM_PKGLEN_GRAPHIRE, 26202, 16325, 255, | |
| 0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; | |
| static const struct wacom_features wacom_features_0x9A = | |
| { "Wacom ISDv4 9A", WACOM_PKGLEN_GRAPHIRE, 26202, 16325, 255, | |
| 0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; | |
| static const struct wacom_features wacom_features_0x9F = | |
| { "Wacom ISDv4 9F", WACOM_PKGLEN_GRAPHIRE, 26202, 16325, 255, | |
| 0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; | |
| static const struct wacom_features wacom_features_0xE2 = | |
| { "Wacom ISDv4 E2", WACOM_PKGLEN_TPC2FG, 26202, 16325, 255, | |
| 0, TABLETPC2FG, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; | |
| static const struct wacom_features wacom_features_0xE3 = | |
| { "Wacom ISDv4 E3", WACOM_PKGLEN_TPC2FG, 26202, 16325, 255, | |
| 0, TABLETPC2FG, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; | |
| static const struct wacom_features wacom_features_0xE6 = | |
| { "Wacom ISDv4 E6", WACOM_PKGLEN_TPC2FG, 27760, 15694, 255, | |
| 0, TABLETPC2FG, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; | |
| static const struct wacom_features wacom_features_0x47 = | |
| { "Wacom Intuos2 6x8", WACOM_PKGLEN_INTUOS, 20320, 16240, 1023, | |
| 31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; | |
| static const struct wacom_features wacom_features_0xD0 = | |
| { "Wacom Bamboo 2FG", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023, | |
| 63, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; | |
| static const struct wacom_features wacom_features_0xD1 = | |
| { "Wacom Bamboo 2FG 4x5", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023, | |
| 63, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; | |
| static const struct wacom_features wacom_features_0xD2 = | |
| { "Wacom Bamboo Craft", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023, | |
| 63, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; | |
| static const struct wacom_features wacom_features_0xD3 = | |
| { "Wacom Bamboo 2FG 6x8", WACOM_PKGLEN_BBFUN, 21648, 13530, 1023, | |
| 63, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; | |
| static const struct wacom_features wacom_features_0xD4 = | |
| { "Wacom Bamboo Pen", WACOM_PKGLEN_BBFUN, 14720, 9200, 255, | |
| 63, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; | |
| static const struct wacom_features wacom_features_0xD6 = | |
| { "Wacom BambooPT 2FG 4x5", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023, | |
| 63, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; | |
| static const struct wacom_features wacom_features_0xD7 = | |
| { "Wacom BambooPT 2FG Small", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023, | |
| 63, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; | |
| static const struct wacom_features wacom_features_0xD8 = | |
| { "Wacom Bamboo Comic 2FG", WACOM_PKGLEN_BBFUN, 21648, 13530, 1023, | |
| 63, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; | |
| static const struct wacom_features wacom_features_0xDA = | |
| { "Wacom Bamboo 2FG 4x5 SE", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023, | |
| 63, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; | |
| static struct wacom_features wacom_features_0xDB = | |
| { "Wacom Bamboo 2FG 6x8 SE", WACOM_PKGLEN_BBFUN, 21648, 13530, 1023, | |
| 63, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; | |
| static const struct wacom_features wacom_features_0x6004 = | |
| { "ISD-V4", WACOM_PKGLEN_GRAPHIRE, 12800, 8000, 255, | |
| 0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; | |
| #define USB_DEVICE_WACOM(prod) \ | |
| USB_DEVICE(USB_VENDOR_ID_WACOM, prod), \ | |
| .driver_info = (kernel_ulong_t)&wacom_features_##prod | |
| #define USB_DEVICE_LENOVO(prod) \ | |
| USB_DEVICE(USB_VENDOR_ID_LENOVO, prod), \ | |
| .driver_info = (kernel_ulong_t)&wacom_features_##prod | |
| const struct usb_device_id wacom_ids[] = { | |
| { USB_DEVICE_WACOM(0x00) }, | |
| { USB_DEVICE_WACOM(0x10) }, | |
| { USB_DEVICE_WACOM(0x11) }, | |
| { USB_DEVICE_WACOM(0x12) }, | |
| { USB_DEVICE_WACOM(0x13) }, | |
| { USB_DEVICE_WACOM(0x14) }, | |
| { USB_DEVICE_WACOM(0x15) }, | |
| { USB_DEVICE_WACOM(0x16) }, | |
| { USB_DEVICE_WACOM(0x17) }, | |
| { USB_DEVICE_WACOM(0x18) }, | |
| { USB_DEVICE_WACOM(0x19) }, | |
| { USB_DEVICE_WACOM(0x60) }, | |
| { USB_DEVICE_WACOM(0x61) }, | |
| { USB_DEVICE_WACOM(0x62) }, | |
| { USB_DEVICE_WACOM(0x63) }, | |
| { USB_DEVICE_WACOM(0x64) }, | |
| { USB_DEVICE_WACOM(0x65) }, | |
| { USB_DEVICE_WACOM(0x69) }, | |
| { USB_DEVICE_WACOM(0x20) }, | |
| { USB_DEVICE_WACOM(0x21) }, | |
| { USB_DEVICE_WACOM(0x22) }, | |
| { USB_DEVICE_WACOM(0x23) }, | |
| { USB_DEVICE_WACOM(0x24) }, | |
| { USB_DEVICE_WACOM(0x30) }, | |
| { USB_DEVICE_WACOM(0x31) }, | |
| { USB_DEVICE_WACOM(0x32) }, | |
| { USB_DEVICE_WACOM(0x33) }, | |
| { USB_DEVICE_WACOM(0x34) }, | |
| { USB_DEVICE_WACOM(0x35) }, | |
| { USB_DEVICE_WACOM(0x37) }, | |
| { USB_DEVICE_WACOM(0x38) }, | |
| { USB_DEVICE_WACOM(0x39) }, | |
| { USB_DEVICE_WACOM(0xC4) }, | |
| { USB_DEVICE_WACOM(0xC0) }, | |
| { USB_DEVICE_WACOM(0xC2) }, | |
| { USB_DEVICE_WACOM(0x03) }, | |
| { USB_DEVICE_WACOM(0x41) }, | |
| { USB_DEVICE_WACOM(0x42) }, | |
| { USB_DEVICE_WACOM(0x43) }, | |
| { USB_DEVICE_WACOM(0x44) }, | |
| { USB_DEVICE_WACOM(0x45) }, | |
| { USB_DEVICE_WACOM(0xB0) }, | |
| { USB_DEVICE_WACOM(0xB1) }, | |
| { USB_DEVICE_WACOM(0xB2) }, | |
| { USB_DEVICE_WACOM(0xB3) }, | |
| { USB_DEVICE_WACOM(0xB4) }, | |
| { USB_DEVICE_WACOM(0xB5) }, | |
| { USB_DEVICE_WACOM(0xB7) }, | |
| { USB_DEVICE_WACOM(0xB8) }, | |
| { USB_DEVICE_WACOM(0xB9) }, | |
| { USB_DEVICE_WACOM(0xBA) }, | |
| { USB_DEVICE_WACOM(0xBB) }, | |
| { USB_DEVICE_WACOM(0xBC) }, | |
| { USB_DEVICE_WACOM(0x3F) }, | |
| { USB_DEVICE_WACOM(0xC5) }, | |
| { USB_DEVICE_WACOM(0xC6) }, | |
| { USB_DEVICE_WACOM(0xC7) }, | |
| { USB_DEVICE_WACOM(0xCE) }, | |
| { USB_DEVICE_WACOM(0xD0) }, | |
| { USB_DEVICE_WACOM(0xD1) }, | |
| { USB_DEVICE_WACOM(0xD2) }, | |
| { USB_DEVICE_WACOM(0xD3) }, | |
| { USB_DEVICE_WACOM(0xD4) }, | |
| { USB_DEVICE_WACOM(0xD6) }, | |
| { USB_DEVICE_WACOM(0xD7) }, | |
| { USB_DEVICE_WACOM(0xD8) }, | |
| { USB_DEVICE_WACOM(0xDA) }, | |
| { USB_DEVICE_WACOM(0xDB) }, | |
| { USB_DEVICE_WACOM(0xF0) }, | |
| { USB_DEVICE_WACOM(0xCC) }, | |
| { USB_DEVICE_WACOM(0x90) }, | |
| { USB_DEVICE_WACOM(0x93) }, | |
| { USB_DEVICE_WACOM(0x9A) }, | |
| { USB_DEVICE_WACOM(0x9F) }, | |
| { USB_DEVICE_WACOM(0xE2) }, | |
| { USB_DEVICE_WACOM(0xE3) }, | |
| { USB_DEVICE_WACOM(0xE6) }, | |
| { USB_DEVICE_WACOM(0x47) }, | |
| { USB_DEVICE_LENOVO(0x6004) }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(usb, wacom_ids); |