| /* | |
| * i2c-ocores.c: I2C bus driver for OpenCores I2C controller | |
| * (http://www.opencores.org/projects.cgi/web/i2c/overview). | |
| * | |
| * Peter Korsgaard <jacmet@sunsite.dk> | |
| * | |
| * Support for the GRLIB port of the controller by | |
| * Andreas Larsson <andreas@gaisler.com> | |
| * | |
| * This file is licensed under the terms of the GNU General Public License | |
| * version 2. This program is licensed "as is" without any warranty of any | |
| * kind, whether express or implied. | |
| */ | |
| #include <linux/err.h> | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/init.h> | |
| #include <linux/errno.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/i2c.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/wait.h> | |
| #include <linux/i2c-ocores.h> | |
| #include <linux/slab.h> | |
| #include <linux/io.h> | |
| #include <linux/of_i2c.h> | |
| #include <linux/log2.h> | |
| struct ocores_i2c { | |
| void __iomem *base; | |
| u32 reg_shift; | |
| u32 reg_io_width; | |
| wait_queue_head_t wait; | |
| struct i2c_adapter adap; | |
| struct i2c_msg *msg; | |
| int pos; | |
| int nmsgs; | |
| int state; /* see STATE_ */ | |
| int clock_khz; | |
| void (*setreg)(struct ocores_i2c *i2c, int reg, u8 value); | |
| u8 (*getreg)(struct ocores_i2c *i2c, int reg); | |
| }; | |
| /* registers */ | |
| #define OCI2C_PRELOW 0 | |
| #define OCI2C_PREHIGH 1 | |
| #define OCI2C_CONTROL 2 | |
| #define OCI2C_DATA 3 | |
| #define OCI2C_CMD 4 /* write only */ | |
| #define OCI2C_STATUS 4 /* read only, same address as OCI2C_CMD */ | |
| #define OCI2C_CTRL_IEN 0x40 | |
| #define OCI2C_CTRL_EN 0x80 | |
| #define OCI2C_CMD_START 0x91 | |
| #define OCI2C_CMD_STOP 0x41 | |
| #define OCI2C_CMD_READ 0x21 | |
| #define OCI2C_CMD_WRITE 0x11 | |
| #define OCI2C_CMD_READ_ACK 0x21 | |
| #define OCI2C_CMD_READ_NACK 0x29 | |
| #define OCI2C_CMD_IACK 0x01 | |
| #define OCI2C_STAT_IF 0x01 | |
| #define OCI2C_STAT_TIP 0x02 | |
| #define OCI2C_STAT_ARBLOST 0x20 | |
| #define OCI2C_STAT_BUSY 0x40 | |
| #define OCI2C_STAT_NACK 0x80 | |
| #define STATE_DONE 0 | |
| #define STATE_START 1 | |
| #define STATE_WRITE 2 | |
| #define STATE_READ 3 | |
| #define STATE_ERROR 4 | |
| #define TYPE_OCORES 0 | |
| #define TYPE_GRLIB 1 | |
| static void oc_setreg_8(struct ocores_i2c *i2c, int reg, u8 value) | |
| { | |
| iowrite8(value, i2c->base + (reg << i2c->reg_shift)); | |
| } | |
| static void oc_setreg_16(struct ocores_i2c *i2c, int reg, u8 value) | |
| { | |
| iowrite16(value, i2c->base + (reg << i2c->reg_shift)); | |
| } | |
| static void oc_setreg_32(struct ocores_i2c *i2c, int reg, u8 value) | |
| { | |
| iowrite32(value, i2c->base + (reg << i2c->reg_shift)); | |
| } | |
| static inline u8 oc_getreg_8(struct ocores_i2c *i2c, int reg) | |
| { | |
| return ioread8(i2c->base + (reg << i2c->reg_shift)); | |
| } | |
| static inline u8 oc_getreg_16(struct ocores_i2c *i2c, int reg) | |
| { | |
| return ioread16(i2c->base + (reg << i2c->reg_shift)); | |
| } | |
| static inline u8 oc_getreg_32(struct ocores_i2c *i2c, int reg) | |
| { | |
| return ioread32(i2c->base + (reg << i2c->reg_shift)); | |
| } | |
| static inline void oc_setreg(struct ocores_i2c *i2c, int reg, u8 value) | |
| { | |
| i2c->setreg(i2c, reg, value); | |
| } | |
| static inline u8 oc_getreg(struct ocores_i2c *i2c, int reg) | |
| { | |
| return i2c->getreg(i2c, reg); | |
| } | |
| static void ocores_process(struct ocores_i2c *i2c) | |
| { | |
| struct i2c_msg *msg = i2c->msg; | |
| u8 stat = oc_getreg(i2c, OCI2C_STATUS); | |
| if ((i2c->state == STATE_DONE) || (i2c->state == STATE_ERROR)) { | |
| /* stop has been sent */ | |
| oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_IACK); | |
| wake_up(&i2c->wait); | |
| return; | |
| } | |
| /* error? */ | |
| if (stat & OCI2C_STAT_ARBLOST) { | |
| i2c->state = STATE_ERROR; | |
| oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_STOP); | |
| return; | |
| } | |
| if ((i2c->state == STATE_START) || (i2c->state == STATE_WRITE)) { | |
| i2c->state = | |
| (msg->flags & I2C_M_RD) ? STATE_READ : STATE_WRITE; | |
| if (stat & OCI2C_STAT_NACK) { | |
| i2c->state = STATE_ERROR; | |
| oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_STOP); | |
| return; | |
| } | |
| } else | |
| msg->buf[i2c->pos++] = oc_getreg(i2c, OCI2C_DATA); | |
| /* end of msg? */ | |
| if (i2c->pos == msg->len) { | |
| i2c->nmsgs--; | |
| i2c->msg++; | |
| i2c->pos = 0; | |
| msg = i2c->msg; | |
| if (i2c->nmsgs) { /* end? */ | |
| /* send start? */ | |
| if (!(msg->flags & I2C_M_NOSTART)) { | |
| u8 addr = (msg->addr << 1); | |
| if (msg->flags & I2C_M_RD) | |
| addr |= 1; | |
| i2c->state = STATE_START; | |
| oc_setreg(i2c, OCI2C_DATA, addr); | |
| oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_START); | |
| return; | |
| } else | |
| i2c->state = (msg->flags & I2C_M_RD) | |
| ? STATE_READ : STATE_WRITE; | |
| } else { | |
| i2c->state = STATE_DONE; | |
| oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_STOP); | |
| return; | |
| } | |
| } | |
| if (i2c->state == STATE_READ) { | |
| oc_setreg(i2c, OCI2C_CMD, i2c->pos == (msg->len-1) ? | |
| OCI2C_CMD_READ_NACK : OCI2C_CMD_READ_ACK); | |
| } else { | |
| oc_setreg(i2c, OCI2C_DATA, msg->buf[i2c->pos++]); | |
| oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_WRITE); | |
| } | |
| } | |
| static irqreturn_t ocores_isr(int irq, void *dev_id) | |
| { | |
| struct ocores_i2c *i2c = dev_id; | |
| ocores_process(i2c); | |
| return IRQ_HANDLED; | |
| } | |
| static int ocores_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) | |
| { | |
| struct ocores_i2c *i2c = i2c_get_adapdata(adap); | |
| i2c->msg = msgs; | |
| i2c->pos = 0; | |
| i2c->nmsgs = num; | |
| i2c->state = STATE_START; | |
| oc_setreg(i2c, OCI2C_DATA, | |
| (i2c->msg->addr << 1) | | |
| ((i2c->msg->flags & I2C_M_RD) ? 1:0)); | |
| oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_START); | |
| if (wait_event_timeout(i2c->wait, (i2c->state == STATE_ERROR) || | |
| (i2c->state == STATE_DONE), HZ)) | |
| return (i2c->state == STATE_DONE) ? num : -EIO; | |
| else | |
| return -ETIMEDOUT; | |
| } | |
| static void ocores_init(struct ocores_i2c *i2c) | |
| { | |
| int prescale; | |
| u8 ctrl = oc_getreg(i2c, OCI2C_CONTROL); | |
| /* make sure the device is disabled */ | |
| oc_setreg(i2c, OCI2C_CONTROL, ctrl & ~(OCI2C_CTRL_EN|OCI2C_CTRL_IEN)); | |
| prescale = (i2c->clock_khz / (5*100)) - 1; | |
| oc_setreg(i2c, OCI2C_PRELOW, prescale & 0xff); | |
| oc_setreg(i2c, OCI2C_PREHIGH, prescale >> 8); | |
| /* Init the device */ | |
| oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_IACK); | |
| oc_setreg(i2c, OCI2C_CONTROL, ctrl | OCI2C_CTRL_IEN | OCI2C_CTRL_EN); | |
| } | |
| static u32 ocores_func(struct i2c_adapter *adap) | |
| { | |
| return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; | |
| } | |
| static const struct i2c_algorithm ocores_algorithm = { | |
| .master_xfer = ocores_xfer, | |
| .functionality = ocores_func, | |
| }; | |
| static struct i2c_adapter ocores_adapter = { | |
| .owner = THIS_MODULE, | |
| .name = "i2c-ocores", | |
| .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, | |
| .algo = &ocores_algorithm, | |
| }; | |
| static struct of_device_id ocores_i2c_match[] = { | |
| { | |
| .compatible = "opencores,i2c-ocores", | |
| .data = (void *)TYPE_OCORES, | |
| }, | |
| { | |
| .compatible = "aeroflexgaisler,i2cmst", | |
| .data = (void *)TYPE_GRLIB, | |
| }, | |
| {}, | |
| }; | |
| MODULE_DEVICE_TABLE(of, ocores_i2c_match); | |
| #ifdef CONFIG_OF | |
| /* Read and write functions for the GRLIB port of the controller. Registers are | |
| * 32-bit big endian and the PRELOW and PREHIGH registers are merged into one | |
| * register. The subsequent registers has their offset decreased accordingly. */ | |
| static u8 oc_getreg_grlib(struct ocores_i2c *i2c, int reg) | |
| { | |
| u32 rd; | |
| int rreg = reg; | |
| if (reg != OCI2C_PRELOW) | |
| rreg--; | |
| rd = ioread32be(i2c->base + (rreg << i2c->reg_shift)); | |
| if (reg == OCI2C_PREHIGH) | |
| return (u8)(rd >> 8); | |
| else | |
| return (u8)rd; | |
| } | |
| static void oc_setreg_grlib(struct ocores_i2c *i2c, int reg, u8 value) | |
| { | |
| u32 curr, wr; | |
| int rreg = reg; | |
| if (reg != OCI2C_PRELOW) | |
| rreg--; | |
| if (reg == OCI2C_PRELOW || reg == OCI2C_PREHIGH) { | |
| curr = ioread32be(i2c->base + (rreg << i2c->reg_shift)); | |
| if (reg == OCI2C_PRELOW) | |
| wr = (curr & 0xff00) | value; | |
| else | |
| wr = (((u32)value) << 8) | (curr & 0xff); | |
| } else { | |
| wr = value; | |
| } | |
| iowrite32be(wr, i2c->base + (rreg << i2c->reg_shift)); | |
| } | |
| static int ocores_i2c_of_probe(struct platform_device *pdev, | |
| struct ocores_i2c *i2c) | |
| { | |
| struct device_node *np = pdev->dev.of_node; | |
| const struct of_device_id *match; | |
| u32 val; | |
| if (of_property_read_u32(np, "reg-shift", &i2c->reg_shift)) { | |
| /* no 'reg-shift', check for deprecated 'regstep' */ | |
| if (!of_property_read_u32(np, "regstep", &val)) { | |
| if (!is_power_of_2(val)) { | |
| dev_err(&pdev->dev, "invalid regstep %d\n", | |
| val); | |
| return -EINVAL; | |
| } | |
| i2c->reg_shift = ilog2(val); | |
| dev_warn(&pdev->dev, | |
| "regstep property deprecated, use reg-shift\n"); | |
| } | |
| } | |
| if (of_property_read_u32(np, "clock-frequency", &val)) { | |
| dev_err(&pdev->dev, | |
| "Missing required parameter 'clock-frequency'\n"); | |
| return -ENODEV; | |
| } | |
| i2c->clock_khz = val / 1000; | |
| of_property_read_u32(pdev->dev.of_node, "reg-io-width", | |
| &i2c->reg_io_width); | |
| match = of_match_node(ocores_i2c_match, pdev->dev.of_node); | |
| if (match && (long)match->data == TYPE_GRLIB) { | |
| dev_dbg(&pdev->dev, "GRLIB variant of i2c-ocores\n"); | |
| i2c->setreg = oc_setreg_grlib; | |
| i2c->getreg = oc_getreg_grlib; | |
| } | |
| return 0; | |
| } | |
| #else | |
| #define ocores_i2c_of_probe(pdev,i2c) -ENODEV | |
| #endif | |
| static int ocores_i2c_probe(struct platform_device *pdev) | |
| { | |
| struct ocores_i2c *i2c; | |
| struct ocores_i2c_platform_data *pdata; | |
| struct resource *res; | |
| int irq; | |
| int ret; | |
| int i; | |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
| if (!res) | |
| return -ENODEV; | |
| irq = platform_get_irq(pdev, 0); | |
| if (irq < 0) | |
| return irq; | |
| i2c = devm_kzalloc(&pdev->dev, sizeof(*i2c), GFP_KERNEL); | |
| if (!i2c) | |
| return -ENOMEM; | |
| i2c->base = devm_ioremap_resource(&pdev->dev, res); | |
| if (IS_ERR(i2c->base)) | |
| return PTR_ERR(i2c->base); | |
| pdata = pdev->dev.platform_data; | |
| if (pdata) { | |
| i2c->reg_shift = pdata->reg_shift; | |
| i2c->reg_io_width = pdata->reg_io_width; | |
| i2c->clock_khz = pdata->clock_khz; | |
| } else { | |
| ret = ocores_i2c_of_probe(pdev, i2c); | |
| if (ret) | |
| return ret; | |
| } | |
| if (i2c->reg_io_width == 0) | |
| i2c->reg_io_width = 1; /* Set to default value */ | |
| if (!i2c->setreg || !i2c->getreg) { | |
| switch (i2c->reg_io_width) { | |
| case 1: | |
| i2c->setreg = oc_setreg_8; | |
| i2c->getreg = oc_getreg_8; | |
| break; | |
| case 2: | |
| i2c->setreg = oc_setreg_16; | |
| i2c->getreg = oc_getreg_16; | |
| break; | |
| case 4: | |
| i2c->setreg = oc_setreg_32; | |
| i2c->getreg = oc_getreg_32; | |
| break; | |
| default: | |
| dev_err(&pdev->dev, "Unsupported I/O width (%d)\n", | |
| i2c->reg_io_width); | |
| return -EINVAL; | |
| } | |
| } | |
| ocores_init(i2c); | |
| init_waitqueue_head(&i2c->wait); | |
| ret = devm_request_irq(&pdev->dev, irq, ocores_isr, 0, | |
| pdev->name, i2c); | |
| if (ret) { | |
| dev_err(&pdev->dev, "Cannot claim IRQ\n"); | |
| return ret; | |
| } | |
| /* hook up driver to tree */ | |
| platform_set_drvdata(pdev, i2c); | |
| i2c->adap = ocores_adapter; | |
| i2c_set_adapdata(&i2c->adap, i2c); | |
| i2c->adap.dev.parent = &pdev->dev; | |
| i2c->adap.dev.of_node = pdev->dev.of_node; | |
| /* add i2c adapter to i2c tree */ | |
| ret = i2c_add_adapter(&i2c->adap); | |
| if (ret) { | |
| dev_err(&pdev->dev, "Failed to add adapter\n"); | |
| return ret; | |
| } | |
| /* add in known devices to the bus */ | |
| if (pdata) { | |
| for (i = 0; i < pdata->num_devices; i++) | |
| i2c_new_device(&i2c->adap, pdata->devices + i); | |
| } else { | |
| of_i2c_register_devices(&i2c->adap); | |
| } | |
| return 0; | |
| } | |
| static int ocores_i2c_remove(struct platform_device *pdev) | |
| { | |
| struct ocores_i2c *i2c = platform_get_drvdata(pdev); | |
| /* disable i2c logic */ | |
| oc_setreg(i2c, OCI2C_CONTROL, oc_getreg(i2c, OCI2C_CONTROL) | |
| & ~(OCI2C_CTRL_EN|OCI2C_CTRL_IEN)); | |
| /* remove adapter & data */ | |
| i2c_del_adapter(&i2c->adap); | |
| return 0; | |
| } | |
| #ifdef CONFIG_PM | |
| static int ocores_i2c_suspend(struct device *dev) | |
| { | |
| struct ocores_i2c *i2c = dev_get_drvdata(dev); | |
| u8 ctrl = oc_getreg(i2c, OCI2C_CONTROL); | |
| /* make sure the device is disabled */ | |
| oc_setreg(i2c, OCI2C_CONTROL, ctrl & ~(OCI2C_CTRL_EN|OCI2C_CTRL_IEN)); | |
| return 0; | |
| } | |
| static int ocores_i2c_resume(struct device *dev) | |
| { | |
| struct ocores_i2c *i2c = dev_get_drvdata(dev); | |
| ocores_init(i2c); | |
| return 0; | |
| } | |
| static SIMPLE_DEV_PM_OPS(ocores_i2c_pm, ocores_i2c_suspend, ocores_i2c_resume); | |
| #define OCORES_I2C_PM (&ocores_i2c_pm) | |
| #else | |
| #define OCORES_I2C_PM NULL | |
| #endif | |
| static struct platform_driver ocores_i2c_driver = { | |
| .probe = ocores_i2c_probe, | |
| .remove = ocores_i2c_remove, | |
| .driver = { | |
| .owner = THIS_MODULE, | |
| .name = "ocores-i2c", | |
| .of_match_table = ocores_i2c_match, | |
| .pm = OCORES_I2C_PM, | |
| }, | |
| }; | |
| module_platform_driver(ocores_i2c_driver); | |
| MODULE_AUTHOR("Peter Korsgaard <jacmet@sunsite.dk>"); | |
| MODULE_DESCRIPTION("OpenCores I2C bus driver"); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_ALIAS("platform:ocores-i2c"); |