| /* | |
| * Copyright (C) 2007,2008 Freescale Semiconductor, Inc. All rights reserved. | |
| * | |
| * Author: John Rigby <jrigby@freescale.com> | |
| * | |
| * Description: | |
| * MPC512x Shared code | |
| * | |
| * This is free software; you can redistribute it and/or modify it | |
| * under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/io.h> | |
| #include <linux/irq.h> | |
| #include <linux/of_platform.h> | |
| #include <linux/fsl-diu-fb.h> | |
| #include <linux/bootmem.h> | |
| #include <sysdev/fsl_soc.h> | |
| #include <asm/cacheflush.h> | |
| #include <asm/machdep.h> | |
| #include <asm/ipic.h> | |
| #include <asm/prom.h> | |
| #include <asm/time.h> | |
| #include <asm/mpc5121.h> | |
| #include <asm/mpc52xx_psc.h> | |
| #include "mpc512x.h" | |
| static struct mpc512x_reset_module __iomem *reset_module_base; | |
| static void __init mpc512x_restart_init(void) | |
| { | |
| struct device_node *np; | |
| np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-reset"); | |
| if (!np) | |
| return; | |
| reset_module_base = of_iomap(np, 0); | |
| of_node_put(np); | |
| } | |
| void mpc512x_restart(char *cmd) | |
| { | |
| if (reset_module_base) { | |
| /* Enable software reset "RSTE" */ | |
| out_be32(&reset_module_base->rpr, 0x52535445); | |
| /* Set software hard reset */ | |
| out_be32(&reset_module_base->rcr, 0x2); | |
| } else { | |
| pr_err("Restart module not mapped.\n"); | |
| } | |
| for (;;) | |
| ; | |
| } | |
| #if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE) | |
| struct fsl_diu_shared_fb { | |
| u8 gamma[0x300]; /* 32-bit aligned! */ | |
| struct diu_ad ad0; /* 32-bit aligned! */ | |
| phys_addr_t fb_phys; | |
| size_t fb_len; | |
| bool in_use; | |
| }; | |
| #define DIU_DIV_MASK 0x000000ff | |
| void mpc512x_set_pixel_clock(unsigned int pixclock) | |
| { | |
| unsigned long bestval, bestfreq, speed, busfreq; | |
| unsigned long minpixclock, maxpixclock, pixval; | |
| struct mpc512x_ccm __iomem *ccm; | |
| struct device_node *np; | |
| u32 temp; | |
| long err; | |
| int i; | |
| np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-clock"); | |
| if (!np) { | |
| pr_err("Can't find clock control module.\n"); | |
| return; | |
| } | |
| ccm = of_iomap(np, 0); | |
| of_node_put(np); | |
| if (!ccm) { | |
| pr_err("Can't map clock control module reg.\n"); | |
| return; | |
| } | |
| np = of_find_node_by_type(NULL, "cpu"); | |
| if (np) { | |
| const unsigned int *prop = | |
| of_get_property(np, "bus-frequency", NULL); | |
| of_node_put(np); | |
| if (prop) { | |
| busfreq = *prop; | |
| } else { | |
| pr_err("Can't get bus-frequency property\n"); | |
| return; | |
| } | |
| } else { | |
| pr_err("Can't find 'cpu' node.\n"); | |
| return; | |
| } | |
| /* Pixel Clock configuration */ | |
| pr_debug("DIU: Bus Frequency = %lu\n", busfreq); | |
| speed = busfreq * 4; /* DIU_DIV ratio is 4 * CSB_CLK / DIU_CLK */ | |
| /* Calculate the pixel clock with the smallest error */ | |
| /* calculate the following in steps to avoid overflow */ | |
| pr_debug("DIU pixclock in ps - %d\n", pixclock); | |
| temp = (1000000000 / pixclock) * 1000; | |
| pixclock = temp; | |
| pr_debug("DIU pixclock freq - %u\n", pixclock); | |
| temp = temp / 20; /* pixclock * 0.05 */ | |
| pr_debug("deviation = %d\n", temp); | |
| minpixclock = pixclock - temp; | |
| maxpixclock = pixclock + temp; | |
| pr_debug("DIU minpixclock - %lu\n", minpixclock); | |
| pr_debug("DIU maxpixclock - %lu\n", maxpixclock); | |
| pixval = speed/pixclock; | |
| pr_debug("DIU pixval = %lu\n", pixval); | |
| err = LONG_MAX; | |
| bestval = pixval; | |
| pr_debug("DIU bestval = %lu\n", bestval); | |
| bestfreq = 0; | |
| for (i = -1; i <= 1; i++) { | |
| temp = speed / (pixval+i); | |
| pr_debug("DIU test pixval i=%d, pixval=%lu, temp freq. = %u\n", | |
| i, pixval, temp); | |
| if ((temp < minpixclock) || (temp > maxpixclock)) | |
| pr_debug("DIU exceeds monitor range (%lu to %lu)\n", | |
| minpixclock, maxpixclock); | |
| else if (abs(temp - pixclock) < err) { | |
| pr_debug("Entered the else if block %d\n", i); | |
| err = abs(temp - pixclock); | |
| bestval = pixval + i; | |
| bestfreq = temp; | |
| } | |
| } | |
| pr_debug("DIU chose = %lx\n", bestval); | |
| pr_debug("DIU error = %ld\n NomPixClk ", err); | |
| pr_debug("DIU: Best Freq = %lx\n", bestfreq); | |
| /* Modify DIU_DIV in CCM SCFR1 */ | |
| temp = in_be32(&ccm->scfr1); | |
| pr_debug("DIU: Current value of SCFR1: 0x%08x\n", temp); | |
| temp &= ~DIU_DIV_MASK; | |
| temp |= (bestval & DIU_DIV_MASK); | |
| out_be32(&ccm->scfr1, temp); | |
| pr_debug("DIU: Modified value of SCFR1: 0x%08x\n", temp); | |
| iounmap(ccm); | |
| } | |
| enum fsl_diu_monitor_port | |
| mpc512x_valid_monitor_port(enum fsl_diu_monitor_port port) | |
| { | |
| return FSL_DIU_PORT_DVI; | |
| } | |
| static struct fsl_diu_shared_fb __attribute__ ((__aligned__(8))) diu_shared_fb; | |
| static inline void mpc512x_free_bootmem(struct page *page) | |
| { | |
| BUG_ON(PageTail(page)); | |
| BUG_ON(atomic_read(&page->_count) > 1); | |
| free_reserved_page(page); | |
| } | |
| void mpc512x_release_bootmem(void) | |
| { | |
| unsigned long addr = diu_shared_fb.fb_phys & PAGE_MASK; | |
| unsigned long size = diu_shared_fb.fb_len; | |
| unsigned long start, end; | |
| if (diu_shared_fb.in_use) { | |
| start = PFN_UP(addr); | |
| end = PFN_DOWN(addr + size); | |
| for (; start < end; start++) | |
| mpc512x_free_bootmem(pfn_to_page(start)); | |
| diu_shared_fb.in_use = false; | |
| } | |
| diu_ops.release_bootmem = NULL; | |
| } | |
| /* | |
| * Check if DIU was pre-initialized. If so, perform steps | |
| * needed to continue displaying through the whole boot process. | |
| * Move area descriptor and gamma table elsewhere, they are | |
| * destroyed by bootmem allocator otherwise. The frame buffer | |
| * address range will be reserved in setup_arch() after bootmem | |
| * allocator is up. | |
| */ | |
| void __init mpc512x_init_diu(void) | |
| { | |
| struct device_node *np; | |
| struct diu __iomem *diu_reg; | |
| phys_addr_t desc; | |
| void __iomem *vaddr; | |
| unsigned long mode, pix_fmt, res, bpp; | |
| unsigned long dst; | |
| np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-diu"); | |
| if (!np) { | |
| pr_err("No DIU node\n"); | |
| return; | |
| } | |
| diu_reg = of_iomap(np, 0); | |
| of_node_put(np); | |
| if (!diu_reg) { | |
| pr_err("Can't map DIU\n"); | |
| return; | |
| } | |
| mode = in_be32(&diu_reg->diu_mode); | |
| if (mode == MFB_MODE0) { | |
| pr_info("%s: DIU OFF\n", __func__); | |
| goto out; | |
| } | |
| desc = in_be32(&diu_reg->desc[0]); | |
| vaddr = ioremap(desc, sizeof(struct diu_ad)); | |
| if (!vaddr) { | |
| pr_err("Can't map DIU area desc.\n"); | |
| goto out; | |
| } | |
| memcpy(&diu_shared_fb.ad0, vaddr, sizeof(struct diu_ad)); | |
| /* flush fb area descriptor */ | |
| dst = (unsigned long)&diu_shared_fb.ad0; | |
| flush_dcache_range(dst, dst + sizeof(struct diu_ad) - 1); | |
| res = in_be32(&diu_reg->disp_size); | |
| pix_fmt = in_le32(vaddr); | |
| bpp = ((pix_fmt >> 16) & 0x3) + 1; | |
| diu_shared_fb.fb_phys = in_le32(vaddr + 4); | |
| diu_shared_fb.fb_len = ((res & 0xfff0000) >> 16) * (res & 0xfff) * bpp; | |
| diu_shared_fb.in_use = true; | |
| iounmap(vaddr); | |
| desc = in_be32(&diu_reg->gamma); | |
| vaddr = ioremap(desc, sizeof(diu_shared_fb.gamma)); | |
| if (!vaddr) { | |
| pr_err("Can't map DIU area desc.\n"); | |
| diu_shared_fb.in_use = false; | |
| goto out; | |
| } | |
| memcpy(&diu_shared_fb.gamma, vaddr, sizeof(diu_shared_fb.gamma)); | |
| /* flush gamma table */ | |
| dst = (unsigned long)&diu_shared_fb.gamma; | |
| flush_dcache_range(dst, dst + sizeof(diu_shared_fb.gamma) - 1); | |
| iounmap(vaddr); | |
| out_be32(&diu_reg->gamma, virt_to_phys(&diu_shared_fb.gamma)); | |
| out_be32(&diu_reg->desc[1], 0); | |
| out_be32(&diu_reg->desc[2], 0); | |
| out_be32(&diu_reg->desc[0], virt_to_phys(&diu_shared_fb.ad0)); | |
| out: | |
| iounmap(diu_reg); | |
| } | |
| void __init mpc512x_setup_diu(void) | |
| { | |
| int ret; | |
| /* | |
| * We do not allocate and configure new area for bitmap buffer | |
| * because it would requere copying bitmap data (splash image) | |
| * and so negatively affect boot time. Instead we reserve the | |
| * already configured frame buffer area so that it won't be | |
| * destroyed. The starting address of the area to reserve and | |
| * also it's length is passed to reserve_bootmem(). It will be | |
| * freed later on first open of fbdev, when splash image is not | |
| * needed any more. | |
| */ | |
| if (diu_shared_fb.in_use) { | |
| ret = reserve_bootmem(diu_shared_fb.fb_phys, | |
| diu_shared_fb.fb_len, | |
| BOOTMEM_EXCLUSIVE); | |
| if (ret) { | |
| pr_err("%s: reserve bootmem failed\n", __func__); | |
| diu_shared_fb.in_use = false; | |
| } | |
| } | |
| diu_ops.set_pixel_clock = mpc512x_set_pixel_clock; | |
| diu_ops.valid_monitor_port = mpc512x_valid_monitor_port; | |
| diu_ops.release_bootmem = mpc512x_release_bootmem; | |
| } | |
| #endif | |
| void __init mpc512x_init_IRQ(void) | |
| { | |
| struct device_node *np; | |
| np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-ipic"); | |
| if (!np) | |
| return; | |
| ipic_init(np, 0); | |
| of_node_put(np); | |
| /* | |
| * Initialize the default interrupt mapping priorities, | |
| * in case the boot rom changed something on us. | |
| */ | |
| ipic_set_default_priority(); | |
| } | |
| /* | |
| * Nodes to do bus probe on, soc and localbus | |
| */ | |
| static struct of_device_id __initdata of_bus_ids[] = { | |
| { .compatible = "fsl,mpc5121-immr", }, | |
| { .compatible = "fsl,mpc5121-localbus", }, | |
| { .compatible = "fsl,mpc5121-mbx", }, | |
| { .compatible = "fsl,mpc5121-nfc", }, | |
| { .compatible = "fsl,mpc5121-sram", }, | |
| { .compatible = "fsl,mpc5121-pci", }, | |
| { .compatible = "gpio-leds", }, | |
| {}, | |
| }; | |
| void __init mpc512x_declare_of_platform_devices(void) | |
| { | |
| if (of_platform_bus_probe(NULL, of_bus_ids, NULL)) | |
| printk(KERN_ERR __FILE__ ": " | |
| "Error while probing of_platform bus\n"); | |
| } | |
| #define DEFAULT_FIFO_SIZE 16 | |
| const char *mpc512x_select_psc_compat(void) | |
| { | |
| if (of_machine_is_compatible("fsl,mpc5121")) | |
| return "fsl,mpc5121-psc"; | |
| if (of_machine_is_compatible("fsl,mpc5125")) | |
| return "fsl,mpc5125-psc"; | |
| return NULL; | |
| } | |
| static unsigned int __init get_fifo_size(struct device_node *np, | |
| char *prop_name) | |
| { | |
| const unsigned int *fp; | |
| fp = of_get_property(np, prop_name, NULL); | |
| if (fp) | |
| return *fp; | |
| pr_warning("no %s property in %s node, defaulting to %d\n", | |
| prop_name, np->full_name, DEFAULT_FIFO_SIZE); | |
| return DEFAULT_FIFO_SIZE; | |
| } | |
| #define FIFOC(_base) ((struct mpc512x_psc_fifo __iomem *) \ | |
| ((u32)(_base) + sizeof(struct mpc52xx_psc))) | |
| /* Init PSC FIFO space for TX and RX slices */ | |
| void __init mpc512x_psc_fifo_init(void) | |
| { | |
| struct device_node *np; | |
| void __iomem *psc; | |
| unsigned int tx_fifo_size; | |
| unsigned int rx_fifo_size; | |
| const char *psc_compat; | |
| int fifobase = 0; /* current fifo address in 32 bit words */ | |
| psc_compat = mpc512x_select_psc_compat(); | |
| if (!psc_compat) { | |
| pr_err("%s: no compatible devices found\n", __func__); | |
| return; | |
| } | |
| for_each_compatible_node(np, NULL, psc_compat) { | |
| tx_fifo_size = get_fifo_size(np, "fsl,tx-fifo-size"); | |
| rx_fifo_size = get_fifo_size(np, "fsl,rx-fifo-size"); | |
| /* size in register is in 4 byte units */ | |
| tx_fifo_size /= 4; | |
| rx_fifo_size /= 4; | |
| if (!tx_fifo_size) | |
| tx_fifo_size = 1; | |
| if (!rx_fifo_size) | |
| rx_fifo_size = 1; | |
| psc = of_iomap(np, 0); | |
| if (!psc) { | |
| pr_err("%s: Can't map %s device\n", | |
| __func__, np->full_name); | |
| continue; | |
| } | |
| /* FIFO space is 4KiB, check if requested size is available */ | |
| if ((fifobase + tx_fifo_size + rx_fifo_size) > 0x1000) { | |
| pr_err("%s: no fifo space available for %s\n", | |
| __func__, np->full_name); | |
| iounmap(psc); | |
| /* | |
| * chances are that another device requests less | |
| * fifo space, so we continue. | |
| */ | |
| continue; | |
| } | |
| /* set tx and rx fifo size registers */ | |
| out_be32(&FIFOC(psc)->txsz, (fifobase << 16) | tx_fifo_size); | |
| fifobase += tx_fifo_size; | |
| out_be32(&FIFOC(psc)->rxsz, (fifobase << 16) | rx_fifo_size); | |
| fifobase += rx_fifo_size; | |
| /* reset and enable the slices */ | |
| out_be32(&FIFOC(psc)->txcmd, 0x80); | |
| out_be32(&FIFOC(psc)->txcmd, 0x01); | |
| out_be32(&FIFOC(psc)->rxcmd, 0x80); | |
| out_be32(&FIFOC(psc)->rxcmd, 0x01); | |
| iounmap(psc); | |
| } | |
| } | |
| void __init mpc512x_init(void) | |
| { | |
| mpc5121_clk_init(); | |
| mpc512x_declare_of_platform_devices(); | |
| mpc512x_restart_init(); | |
| mpc512x_psc_fifo_init(); | |
| } | |
| /** | |
| * mpc512x_cs_config - Setup chip select configuration | |
| * @cs: chip select number | |
| * @val: chip select configuration value | |
| * | |
| * Perform chip select configuration for devices on LocalPlus Bus. | |
| * Intended to dynamically reconfigure the chip select parameters | |
| * for configurable devices on the bus. | |
| */ | |
| int mpc512x_cs_config(unsigned int cs, u32 val) | |
| { | |
| static struct mpc512x_lpc __iomem *lpc; | |
| struct device_node *np; | |
| if (cs > 7) | |
| return -EINVAL; | |
| if (!lpc) { | |
| np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-lpc"); | |
| lpc = of_iomap(np, 0); | |
| of_node_put(np); | |
| if (!lpc) | |
| return -ENOMEM; | |
| } | |
| out_be32(&lpc->cs_cfg[cs], val); | |
| return 0; | |
| } | |
| EXPORT_SYMBOL(mpc512x_cs_config); |