| /* | |
| * Copyright (C) NEC Electronics Corporation 2004-2006 | |
| * | |
| * This file is based on the arch/mips/ddb5xxx/ddb5477/setup.c. | |
| * | |
| * Copyright 2001 MontaVista Software Inc. | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
| */ | |
| #include <linux/init.h> | |
| #include <linux/kernel.h> | |
| #include <linux/types.h> | |
| #include <asm/time.h> | |
| #include <asm/reboot.h> | |
| #include <asm/emma/emma2rh.h> | |
| #define USE_CPU_COUNTER_TIMER /* whether we use cpu counter */ | |
| extern void markeins_led(const char *); | |
| static int bus_frequency; | |
| static void markeins_machine_restart(char *command) | |
| { | |
| static void (*back_to_prom) (void) = (void (*)(void))0xbfc00000; | |
| printk("cannot EMMA2RH Mark-eins restart.\n"); | |
| markeins_led("restart."); | |
| back_to_prom(); | |
| } | |
| static void markeins_machine_halt(void) | |
| { | |
| printk("EMMA2RH Mark-eins halted.\n"); | |
| markeins_led("halted."); | |
| while (1) ; | |
| } | |
| static void markeins_machine_power_off(void) | |
| { | |
| markeins_led("poweroff."); | |
| while (1) ; | |
| } | |
| static unsigned long __initdata emma2rh_clock[4] = { | |
| 166500000, 187312500, 199800000, 210600000 | |
| }; | |
| static unsigned int __init detect_bus_frequency(unsigned long rtc_base) | |
| { | |
| u32 reg; | |
| /* detect from boot strap */ | |
| reg = emma2rh_in32(EMMA2RH_BHIF_STRAP_0); | |
| reg = (reg >> 4) & 0x3; | |
| return emma2rh_clock[reg]; | |
| } | |
| void __init plat_time_init(void) | |
| { | |
| u32 reg; | |
| if (bus_frequency == 0) | |
| bus_frequency = detect_bus_frequency(0); | |
| reg = emma2rh_in32(EMMA2RH_BHIF_STRAP_0); | |
| if ((reg & 0x3) == 0) | |
| reg = (reg >> 6) & 0x3; | |
| else { | |
| reg = emma2rh_in32(EMMA2RH_BHIF_MAIN_CTRL); | |
| reg = (reg >> 4) & 0x3; | |
| } | |
| mips_hpt_frequency = (bus_frequency * (4 + reg)) / 4 / 2; | |
| } | |
| static void markeins_board_init(void); | |
| extern void markeins_irq_setup(void); | |
| static void inline __init markeins_sio_setup(void) | |
| { | |
| } | |
| void __init plat_mem_setup(void) | |
| { | |
| /* initialize board - we don't trust the loader */ | |
| markeins_board_init(); | |
| set_io_port_base(KSEG1ADDR(EMMA2RH_PCI_IO_BASE)); | |
| _machine_restart = markeins_machine_restart; | |
| _machine_halt = markeins_machine_halt; | |
| pm_power_off = markeins_machine_power_off; | |
| /* setup resource limits */ | |
| ioport_resource.start = EMMA2RH_PCI_IO_BASE; | |
| ioport_resource.end = EMMA2RH_PCI_IO_BASE + EMMA2RH_PCI_IO_SIZE - 1; | |
| iomem_resource.start = EMMA2RH_IO_BASE; | |
| iomem_resource.end = EMMA2RH_ROM_BASE - 1; | |
| /* Reboot on panic */ | |
| panic_timeout = 180; | |
| markeins_sio_setup(); | |
| } | |
| static void __init markeins_board_init(void) | |
| { | |
| u32 val; | |
| val = emma2rh_in32(EMMA2RH_PBRD_INT_EN); /* open serial interrupts. */ | |
| emma2rh_out32(EMMA2RH_PBRD_INT_EN, val | 0xaa); | |
| val = emma2rh_in32(EMMA2RH_PBRD_CLKSEL); /* set serial clocks. */ | |
| emma2rh_out32(EMMA2RH_PBRD_CLKSEL, val | 0x5); /* 18MHz */ | |
| emma2rh_out32(EMMA2RH_PCI_CONTROL, 0); | |
| markeins_led("MVL E2RH"); | |
| } |