| /* | |
| * DTS file for all SPEAr3xx SoCs | |
| * | |
| * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> | |
| * | |
| * The code contained herein is licensed under the GNU General Public | |
| * License. You may obtain a copy of the GNU General Public License | |
| * Version 2 or later at the following locations: | |
| * | |
| * http://www.opensource.org/licenses/gpl-license.html | |
| * http://www.gnu.org/copyleft/gpl.html | |
| */ | |
| /include/ "skeleton.dtsi" | |
| / { | |
| interrupt-parent = <&vic>; | |
| cpus { | |
| cpu@0 { | |
| compatible = "arm,arm926ejs"; | |
| }; | |
| }; | |
| memory { | |
| device_type = "memory"; | |
| reg = <0 0x40000000>; | |
| }; | |
| ahb { | |
| #address-cells = <1>; | |
| #size-cells = <1>; | |
| compatible = "simple-bus"; | |
| ranges = <0xd0000000 0xd0000000 0x30000000>; | |
| vic: interrupt-controller@f1100000 { | |
| compatible = "arm,pl190-vic"; | |
| interrupt-controller; | |
| reg = <0xf1100000 0x1000>; | |
| #interrupt-cells = <1>; | |
| }; | |
| dma@fc400000 { | |
| compatible = "arm,pl080", "arm,primecell"; | |
| reg = <0xfc400000 0x1000>; | |
| interrupt-parent = <&vic>; | |
| interrupts = <8>; | |
| status = "disabled"; | |
| }; | |
| gmac: eth@e0800000 { | |
| compatible = "st,spear600-gmac"; | |
| reg = <0xe0800000 0x8000>; | |
| interrupts = <23 22>; | |
| interrupt-names = "macirq", "eth_wake_irq"; | |
| phy-mode = "mii"; | |
| status = "disabled"; | |
| }; | |
| smi: flash@fc000000 { | |
| compatible = "st,spear600-smi"; | |
| #address-cells = <1>; | |
| #size-cells = <1>; | |
| reg = <0xfc000000 0x1000>; | |
| interrupts = <9>; | |
| status = "disabled"; | |
| }; | |
| spi0: spi@d0100000 { | |
| compatible = "arm,pl022", "arm,primecell"; | |
| reg = <0xd0100000 0x1000>; | |
| interrupts = <20>; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| status = "disabled"; | |
| }; | |
| ehci@e1800000 { | |
| compatible = "st,spear600-ehci", "usb-ehci"; | |
| reg = <0xe1800000 0x1000>; | |
| interrupts = <26>; | |
| status = "disabled"; | |
| }; | |
| ohci@e1900000 { | |
| compatible = "st,spear600-ohci", "usb-ohci"; | |
| reg = <0xe1900000 0x1000>; | |
| interrupts = <25>; | |
| status = "disabled"; | |
| }; | |
| ohci@e2100000 { | |
| compatible = "st,spear600-ohci", "usb-ohci"; | |
| reg = <0xe2100000 0x1000>; | |
| interrupts = <27>; | |
| status = "disabled"; | |
| }; | |
| apb { | |
| #address-cells = <1>; | |
| #size-cells = <1>; | |
| compatible = "simple-bus"; | |
| ranges = <0xd0000000 0xd0000000 0x30000000>; | |
| gpio0: gpio@fc980000 { | |
| compatible = "arm,pl061", "arm,primecell"; | |
| reg = <0xfc980000 0x1000>; | |
| interrupts = <11>; | |
| gpio-controller; | |
| #gpio-cells = <2>; | |
| interrupt-controller; | |
| #interrupt-cells = <2>; | |
| status = "disabled"; | |
| }; | |
| i2c0: i2c@d0180000 { | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| compatible = "snps,designware-i2c"; | |
| reg = <0xd0180000 0x1000>; | |
| interrupts = <21>; | |
| status = "disabled"; | |
| }; | |
| rtc@fc900000 { | |
| compatible = "st,spear600-rtc"; | |
| reg = <0xfc900000 0x1000>; | |
| interrupts = <10>; | |
| status = "disabled"; | |
| }; | |
| serial@d0000000 { | |
| compatible = "arm,pl011", "arm,primecell"; | |
| reg = <0xd0000000 0x1000>; | |
| interrupts = <19>; | |
| status = "disabled"; | |
| }; | |
| wdt@fc880000 { | |
| compatible = "arm,sp805", "arm,primecell"; | |
| reg = <0xfc880000 0x1000>; | |
| interrupts = <12>; | |
| status = "disabled"; | |
| }; | |
| timer@f0000000 { | |
| compatible = "st,spear-timer"; | |
| reg = <0xf0000000 0x400>; | |
| interrupts = <2>; | |
| }; | |
| }; | |
| }; | |
| }; |