| * Freescale MXS LCD Interface (LCDIF) | |
| Required properties: | |
| - compatible: Should be "fsl,<chip>-lcdif". Supported chips include | |
| imx23 and imx28. | |
| - reg: Address and length of the register set for lcdif | |
| - interrupts: Should contain lcdif interrupts | |
| - display : phandle to display node (see below for details) | |
| * display node | |
| Required properties: | |
| - bits-per-pixel : <16> for RGB565, <32> for RGB888/666. | |
| - bus-width : number of data lines. Could be <8>, <16>, <18> or <24>. | |
| Required sub-node: | |
| - display-timings : Refer to binding doc display-timing.txt for details. | |
| Examples: | |
| lcdif@80030000 { | |
| compatible = "fsl,imx28-lcdif"; | |
| reg = <0x80030000 2000>; | |
| interrupts = <38 86>; | |
| display: display { | |
| bits-per-pixel = <32>; | |
| bus-width = <24>; | |
| display-timings { | |
| native-mode = <&timing0>; | |
| timing0: timing0 { | |
| clock-frequency = <33500000>; | |
| hactive = <800>; | |
| vactive = <480>; | |
| hfront-porch = <164>; | |
| hback-porch = <89>; | |
| hsync-len = <10>; | |
| vback-porch = <23>; | |
| vfront-porch = <10>; | |
| vsync-len = <10>; | |
| hsync-active = <0>; | |
| vsync-active = <0>; | |
| de-active = <1>; | |
| pixelclk-active = <0>; | |
| }; | |
| }; | |
| }; | |
| }; |