| /* |
| * twl6030-irq.c - TWL6030 irq support |
| * |
| * Copyright (C) 2005-2009 Texas Instruments, Inc. |
| * |
| * Modifications to defer interrupt handling to a kernel thread: |
| * Copyright (C) 2006 MontaVista Software, Inc. |
| * |
| * Based on tlv320aic23.c: |
| * Copyright (c) by Kai Svahn <kai.svahn@nokia.com> |
| * |
| * Code cleanup and modifications to IRQ handler. |
| * by syed khasim <x0khasim@ti.com> |
| * |
| * TWL6030 specific code and IRQ handling changes by |
| * Jagadeesh Bhaskar Pakaravoor <j-pakaravoor@ti.com> |
| * Balaji T K <balajitk@ti.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| |
| #include <linux/export.h> |
| #include <linux/interrupt.h> |
| #include <linux/irq.h> |
| #include <linux/kthread.h> |
| #include <linux/mfd/twl.h> |
| #include <linux/platform_device.h> |
| #include <linux/suspend.h> |
| #include <linux/of.h> |
| #include <linux/irqdomain.h> |
| #include <linux/of_device.h> |
| |
| #include "twl-core.h" |
| |
| /* |
| * TWL6030 (unlike its predecessors, which had two level interrupt handling) |
| * three interrupt registers INT_STS_A, INT_STS_B and INT_STS_C. |
| * It exposes status bits saying who has raised an interrupt. There are |
| * three mask registers that corresponds to these status registers, that |
| * enables/disables these interrupts. |
| * |
| * We set up IRQs starting at a platform-specified base. An interrupt map table, |
| * specifies mapping between interrupt number and the associated module. |
| */ |
| #define TWL6030_NR_IRQS 20 |
| |
| static int twl6030_interrupt_mapping[24] = { |
| PWR_INTR_OFFSET, /* Bit 0 PWRON */ |
| PWR_INTR_OFFSET, /* Bit 1 RPWRON */ |
| PWR_INTR_OFFSET, /* Bit 2 BAT_VLOW */ |
| RTC_INTR_OFFSET, /* Bit 3 RTC_ALARM */ |
| RTC_INTR_OFFSET, /* Bit 4 RTC_PERIOD */ |
| HOTDIE_INTR_OFFSET, /* Bit 5 HOT_DIE */ |
| SMPSLDO_INTR_OFFSET, /* Bit 6 VXXX_SHORT */ |
| SMPSLDO_INTR_OFFSET, /* Bit 7 VMMC_SHORT */ |
| |
| SMPSLDO_INTR_OFFSET, /* Bit 8 VUSIM_SHORT */ |
| BATDETECT_INTR_OFFSET, /* Bit 9 BAT */ |
| SIMDETECT_INTR_OFFSET, /* Bit 10 SIM */ |
| MMCDETECT_INTR_OFFSET, /* Bit 11 MMC */ |
| RSV_INTR_OFFSET, /* Bit 12 Reserved */ |
| MADC_INTR_OFFSET, /* Bit 13 GPADC_RT_EOC */ |
| MADC_INTR_OFFSET, /* Bit 14 GPADC_SW_EOC */ |
| GASGAUGE_INTR_OFFSET, /* Bit 15 CC_AUTOCAL */ |
| |
| USBOTG_INTR_OFFSET, /* Bit 16 ID_WKUP */ |
| USBOTG_INTR_OFFSET, /* Bit 17 VBUS_WKUP */ |
| USBOTG_INTR_OFFSET, /* Bit 18 ID */ |
| USB_PRES_INTR_OFFSET, /* Bit 19 VBUS */ |
| CHARGER_INTR_OFFSET, /* Bit 20 CHRG_CTRL */ |
| CHARGERFAULT_INTR_OFFSET, /* Bit 21 EXT_CHRG */ |
| CHARGERFAULT_INTR_OFFSET, /* Bit 22 INT_CHRG */ |
| RSV_INTR_OFFSET, /* Bit 23 Reserved */ |
| }; |
| |
| static int twl6032_interrupt_mapping[24] = { |
| PWR_INTR_OFFSET, /* Bit 0 PWRON */ |
| PWR_INTR_OFFSET, /* Bit 1 RPWRON */ |
| PWR_INTR_OFFSET, /* Bit 2 SYS_VLOW */ |
| RTC_INTR_OFFSET, /* Bit 3 RTC_ALARM */ |
| RTC_INTR_OFFSET, /* Bit 4 RTC_PERIOD */ |
| HOTDIE_INTR_OFFSET, /* Bit 5 HOT_DIE */ |
| SMPSLDO_INTR_OFFSET, /* Bit 6 VXXX_SHORT */ |
| PWR_INTR_OFFSET, /* Bit 7 SPDURATION */ |
| |
| PWR_INTR_OFFSET, /* Bit 8 WATCHDOG */ |
| BATDETECT_INTR_OFFSET, /* Bit 9 BAT */ |
| SIMDETECT_INTR_OFFSET, /* Bit 10 SIM */ |
| MMCDETECT_INTR_OFFSET, /* Bit 11 MMC */ |
| MADC_INTR_OFFSET, /* Bit 12 GPADC_RT_EOC */ |
| MADC_INTR_OFFSET, /* Bit 13 GPADC_SW_EOC */ |
| GASGAUGE_INTR_OFFSET, /* Bit 14 CC_EOC */ |
| GASGAUGE_INTR_OFFSET, /* Bit 15 CC_AUTOCAL */ |
| |
| USBOTG_INTR_OFFSET, /* Bit 16 ID_WKUP */ |
| USBOTG_INTR_OFFSET, /* Bit 17 VBUS_WKUP */ |
| USBOTG_INTR_OFFSET, /* Bit 18 ID */ |
| USB_PRES_INTR_OFFSET, /* Bit 19 VBUS */ |
| CHARGER_INTR_OFFSET, /* Bit 20 CHRG_CTRL */ |
| CHARGERFAULT_INTR_OFFSET, /* Bit 21 EXT_CHRG */ |
| CHARGERFAULT_INTR_OFFSET, /* Bit 22 INT_CHRG */ |
| RSV_INTR_OFFSET, /* Bit 23 Reserved */ |
| }; |
| |
| /*----------------------------------------------------------------------*/ |
| |
| struct twl6030_irq { |
| unsigned int irq_base; |
| int twl_irq; |
| bool irq_wake_enabled; |
| atomic_t wakeirqs; |
| struct notifier_block pm_nb; |
| struct irq_chip irq_chip; |
| struct irq_domain *irq_domain; |
| const int *irq_mapping_tbl; |
| }; |
| |
| static struct twl6030_irq *twl6030_irq; |
| |
| static int twl6030_irq_pm_notifier(struct notifier_block *notifier, |
| unsigned long pm_event, void *unused) |
| { |
| int chained_wakeups; |
| struct twl6030_irq *pdata = container_of(notifier, struct twl6030_irq, |
| pm_nb); |
| |
| switch (pm_event) { |
| case PM_SUSPEND_PREPARE: |
| chained_wakeups = atomic_read(&pdata->wakeirqs); |
| |
| if (chained_wakeups && !pdata->irq_wake_enabled) { |
| if (enable_irq_wake(pdata->twl_irq)) |
| pr_err("twl6030 IRQ wake enable failed\n"); |
| else |
| pdata->irq_wake_enabled = true; |
| } else if (!chained_wakeups && pdata->irq_wake_enabled) { |
| disable_irq_wake(pdata->twl_irq); |
| pdata->irq_wake_enabled = false; |
| } |
| |
| disable_irq(pdata->twl_irq); |
| break; |
| |
| case PM_POST_SUSPEND: |
| enable_irq(pdata->twl_irq); |
| break; |
| |
| default: |
| break; |
| } |
| |
| return NOTIFY_DONE; |
| } |
| |
| /* |
| * Threaded irq handler for the twl6030 interrupt. |
| * We query the interrupt controller in the twl6030 to determine |
| * which module is generating the interrupt request and call |
| * handle_nested_irq for that module. |
| */ |
| static irqreturn_t twl6030_irq_thread(int irq, void *data) |
| { |
| int i, ret; |
| union { |
| u8 bytes[4]; |
| __le32 int_sts; |
| } sts; |
| u32 int_sts; /* sts.int_sts converted to CPU endianness */ |
| struct twl6030_irq *pdata = data; |
| |
| /* read INT_STS_A, B and C in one shot using a burst read */ |
| ret = twl_i2c_read(TWL_MODULE_PIH, sts.bytes, REG_INT_STS_A, 3); |
| if (ret) { |
| pr_warn("twl6030_irq: I2C error %d reading PIH ISR\n", ret); |
| return IRQ_HANDLED; |
| } |
| |
| sts.bytes[3] = 0; /* Only 24 bits are valid*/ |
| |
| /* |
| * Since VBUS status bit is not reliable for VBUS disconnect |
| * use CHARGER VBUS detection status bit instead. |
| */ |
| if (sts.bytes[2] & 0x10) |
| sts.bytes[2] |= 0x08; |
| |
| int_sts = le32_to_cpu(sts.int_sts); |
| for (i = 0; int_sts; int_sts >>= 1, i++) |
| if (int_sts & 0x1) { |
| int module_irq = |
| irq_find_mapping(pdata->irq_domain, |
| pdata->irq_mapping_tbl[i]); |
| if (module_irq) |
| handle_nested_irq(module_irq); |
| else |
| pr_err("twl6030_irq: Unmapped PIH ISR %u detected\n", |
| i); |
| pr_debug("twl6030_irq: PIH ISR %u, virq%u\n", |
| i, module_irq); |
| } |
| |
| /* |
| * NOTE: |
| * Simulation confirms that documentation is wrong w.r.t the |
| * interrupt status clear operation. A single *byte* write to |
| * any one of STS_A to STS_C register results in all three |
| * STS registers being reset. Since it does not matter which |
| * value is written, all three registers are cleared on a |
| * single byte write, so we just use 0x0 to clear. |
| */ |
| ret = twl_i2c_write_u8(TWL_MODULE_PIH, 0x00, REG_INT_STS_A); |
| if (ret) |
| pr_warn("twl6030_irq: I2C error in clearing PIH ISR\n"); |
| |
| return IRQ_HANDLED; |
| } |
| |
| /*----------------------------------------------------------------------*/ |
| |
| static int twl6030_irq_set_wake(struct irq_data *d, unsigned int on) |
| { |
| struct twl6030_irq *pdata = irq_data_get_irq_chip_data(d); |
| |
| if (on) |
| atomic_inc(&pdata->wakeirqs); |
| else |
| atomic_dec(&pdata->wakeirqs); |
| |
| return 0; |
| } |
| |
| int twl6030_interrupt_unmask(u8 bit_mask, u8 offset) |
| { |
| int ret; |
| u8 unmask_value; |
| |
| ret = twl_i2c_read_u8(TWL_MODULE_PIH, &unmask_value, |
| REG_INT_STS_A + offset); |
| unmask_value &= (~(bit_mask)); |
| ret |= twl_i2c_write_u8(TWL_MODULE_PIH, unmask_value, |
| REG_INT_STS_A + offset); /* unmask INT_MSK_A/B/C */ |
| return ret; |
| } |
| EXPORT_SYMBOL(twl6030_interrupt_unmask); |
| |
| int twl6030_interrupt_mask(u8 bit_mask, u8 offset) |
| { |
| int ret; |
| u8 mask_value; |
| |
| ret = twl_i2c_read_u8(TWL_MODULE_PIH, &mask_value, |
| REG_INT_STS_A + offset); |
| mask_value |= (bit_mask); |
| ret |= twl_i2c_write_u8(TWL_MODULE_PIH, mask_value, |
| REG_INT_STS_A + offset); /* mask INT_MSK_A/B/C */ |
| return ret; |
| } |
| EXPORT_SYMBOL(twl6030_interrupt_mask); |
| |
| int twl6030_mmc_card_detect_config(void) |
| { |
| int ret; |
| u8 reg_val = 0; |
| |
| /* Unmasking the Card detect Interrupt line for MMC1 from Phoenix */ |
| twl6030_interrupt_unmask(TWL6030_MMCDETECT_INT_MASK, |
| REG_INT_MSK_LINE_B); |
| twl6030_interrupt_unmask(TWL6030_MMCDETECT_INT_MASK, |
| REG_INT_MSK_STS_B); |
| /* |
| * Initially Configuring MMC_CTRL for receiving interrupts & |
| * Card status on TWL6030 for MMC1 |
| */ |
| ret = twl_i2c_read_u8(TWL6030_MODULE_ID0, ®_val, TWL6030_MMCCTRL); |
| if (ret < 0) { |
| pr_err("twl6030: Failed to read MMCCTRL, error %d\n", ret); |
| return ret; |
| } |
| reg_val &= ~VMMC_AUTO_OFF; |
| reg_val |= SW_FC; |
| ret = twl_i2c_write_u8(TWL6030_MODULE_ID0, reg_val, TWL6030_MMCCTRL); |
| if (ret < 0) { |
| pr_err("twl6030: Failed to write MMCCTRL, error %d\n", ret); |
| return ret; |
| } |
| |
| /* Configuring PullUp-PullDown register */ |
| ret = twl_i2c_read_u8(TWL6030_MODULE_ID0, ®_val, |
| TWL6030_CFG_INPUT_PUPD3); |
| if (ret < 0) { |
| pr_err("twl6030: Failed to read CFG_INPUT_PUPD3, error %d\n", |
| ret); |
| return ret; |
| } |
| reg_val &= ~(MMC_PU | MMC_PD); |
| ret = twl_i2c_write_u8(TWL6030_MODULE_ID0, reg_val, |
| TWL6030_CFG_INPUT_PUPD3); |
| if (ret < 0) { |
| pr_err("twl6030: Failed to write CFG_INPUT_PUPD3, error %d\n", |
| ret); |
| return ret; |
| } |
| |
| return irq_find_mapping(twl6030_irq->irq_domain, |
| MMCDETECT_INTR_OFFSET); |
| } |
| EXPORT_SYMBOL(twl6030_mmc_card_detect_config); |
| |
| int twl6030_mmc_card_detect(struct device *dev, int slot) |
| { |
| int ret = -EIO; |
| u8 read_reg = 0; |
| struct platform_device *pdev = to_platform_device(dev); |
| |
| if (pdev->id) { |
| /* TWL6030 provide's Card detect support for |
| * only MMC1 controller. |
| */ |
| pr_err("Unknown MMC controller %d in %s\n", pdev->id, __func__); |
| return ret; |
| } |
| /* |
| * BIT0 of MMC_CTRL on TWL6030 provides card status for MMC1 |
| * 0 - Card not present ,1 - Card present |
| */ |
| ret = twl_i2c_read_u8(TWL6030_MODULE_ID0, &read_reg, |
| TWL6030_MMCCTRL); |
| if (ret >= 0) |
| ret = read_reg & STS_MMC; |
| return ret; |
| } |
| EXPORT_SYMBOL(twl6030_mmc_card_detect); |
| |
| static int twl6030_irq_map(struct irq_domain *d, unsigned int virq, |
| irq_hw_number_t hwirq) |
| { |
| struct twl6030_irq *pdata = d->host_data; |
| |
| irq_set_chip_data(virq, pdata); |
| irq_set_chip_and_handler(virq, &pdata->irq_chip, handle_simple_irq); |
| irq_set_nested_thread(virq, true); |
| irq_set_parent(virq, pdata->twl_irq); |
| irq_set_noprobe(virq); |
| |
| return 0; |
| } |
| |
| static void twl6030_irq_unmap(struct irq_domain *d, unsigned int virq) |
| { |
| irq_set_chip_and_handler(virq, NULL, NULL); |
| irq_set_chip_data(virq, NULL); |
| } |
| |
| static const struct irq_domain_ops twl6030_irq_domain_ops = { |
| .map = twl6030_irq_map, |
| .unmap = twl6030_irq_unmap, |
| .xlate = irq_domain_xlate_onetwocell, |
| }; |
| |
| static const struct of_device_id twl6030_of_match[] = { |
| {.compatible = "ti,twl6030", &twl6030_interrupt_mapping}, |
| {.compatible = "ti,twl6032", &twl6032_interrupt_mapping}, |
| { }, |
| }; |
| |
| int twl6030_init_irq(struct device *dev, int irq_num) |
| { |
| struct device_node *node = dev->of_node; |
| int nr_irqs; |
| int status; |
| u8 mask[3]; |
| const struct of_device_id *of_id; |
| |
| of_id = of_match_device(twl6030_of_match, dev); |
| if (!of_id || !of_id->data) { |
| dev_err(dev, "Unknown TWL device model\n"); |
| return -EINVAL; |
| } |
| |
| nr_irqs = TWL6030_NR_IRQS; |
| |
| twl6030_irq = devm_kzalloc(dev, sizeof(*twl6030_irq), GFP_KERNEL); |
| if (!twl6030_irq) |
| return -ENOMEM; |
| |
| mask[0] = 0xFF; |
| mask[1] = 0xFF; |
| mask[2] = 0xFF; |
| |
| /* mask all int lines */ |
| status = twl_i2c_write(TWL_MODULE_PIH, &mask[0], REG_INT_MSK_LINE_A, 3); |
| /* mask all int sts */ |
| status |= twl_i2c_write(TWL_MODULE_PIH, &mask[0], REG_INT_MSK_STS_A, 3); |
| /* clear INT_STS_A,B,C */ |
| status |= twl_i2c_write(TWL_MODULE_PIH, &mask[0], REG_INT_STS_A, 3); |
| |
| if (status < 0) { |
| dev_err(dev, "I2C err writing TWL_MODULE_PIH: %d\n", status); |
| return status; |
| } |
| |
| /* |
| * install an irq handler for each of the modules; |
| * clone dummy irq_chip since PIH can't *do* anything |
| */ |
| twl6030_irq->irq_chip = dummy_irq_chip; |
| twl6030_irq->irq_chip.name = "twl6030"; |
| twl6030_irq->irq_chip.irq_set_type = NULL; |
| twl6030_irq->irq_chip.irq_set_wake = twl6030_irq_set_wake; |
| |
| twl6030_irq->pm_nb.notifier_call = twl6030_irq_pm_notifier; |
| atomic_set(&twl6030_irq->wakeirqs, 0); |
| twl6030_irq->irq_mapping_tbl = of_id->data; |
| |
| twl6030_irq->irq_domain = |
| irq_domain_add_linear(node, nr_irqs, |
| &twl6030_irq_domain_ops, twl6030_irq); |
| if (!twl6030_irq->irq_domain) { |
| dev_err(dev, "Can't add irq_domain\n"); |
| return -ENOMEM; |
| } |
| |
| dev_info(dev, "PIH (irq %d) nested IRQs\n", irq_num); |
| |
| /* install an irq handler to demultiplex the TWL6030 interrupt */ |
| status = request_threaded_irq(irq_num, NULL, twl6030_irq_thread, |
| IRQF_ONESHOT, "TWL6030-PIH", twl6030_irq); |
| if (status < 0) { |
| dev_err(dev, "could not claim irq %d: %d\n", irq_num, status); |
| goto fail_irq; |
| } |
| |
| twl6030_irq->twl_irq = irq_num; |
| register_pm_notifier(&twl6030_irq->pm_nb); |
| return 0; |
| |
| fail_irq: |
| irq_domain_remove(twl6030_irq->irq_domain); |
| return status; |
| } |
| |
| int twl6030_exit_irq(void) |
| { |
| if (twl6030_irq && twl6030_irq->twl_irq) { |
| unregister_pm_notifier(&twl6030_irq->pm_nb); |
| free_irq(twl6030_irq->twl_irq, NULL); |
| /* |
| * TODO: IRQ domain and allocated nested IRQ descriptors |
| * should be freed somehow here. Now It can't be done, because |
| * child devices will not be deleted during removing of |
| * TWL Core driver and they will still contain allocated |
| * virt IRQs in their Resources tables. |
| * The same prevents us from using devm_request_threaded_irq() |
| * in this module. |
| */ |
| } |
| return 0; |
| } |
| |