| // SPDX-License-Identifier: GPL-2.0-or-later |
| // |
| // Copyright (C) 2018 ROHM Semiconductors |
| // |
| // ROHM BD71837MWV PMIC driver |
| // |
| // Datasheet available from |
| // https://www.rohm.com/datasheet/BD71837MWV/bd71837mwv-e |
| |
| #include <linux/i2c.h> |
| #include <linux/input.h> |
| #include <linux/interrupt.h> |
| #include <linux/mfd/rohm-bd718x7.h> |
| #include <linux/mfd/core.h> |
| #include <linux/module.h> |
| #include <linux/regmap.h> |
| |
| /* |
| * gpio_keys.h requires definiton of bool. It is brought in |
| * by above includes. Keep this as last until gpio_keys.h gets fixed. |
| */ |
| #include <linux/gpio_keys.h> |
| |
| static const u8 supported_revisions[] = { 0xA2 /* BD71837 */ }; |
| |
| static struct gpio_keys_button button = { |
| .code = KEY_POWER, |
| .gpio = -1, |
| .type = EV_KEY, |
| }; |
| |
| static struct gpio_keys_platform_data bd718xx_powerkey_data = { |
| .buttons = &button, |
| .nbuttons = 1, |
| .name = "bd718xx-pwrkey", |
| }; |
| |
| static struct mfd_cell bd71837_mfd_cells[] = { |
| { |
| .name = "gpio-keys", |
| .platform_data = &bd718xx_powerkey_data, |
| .pdata_size = sizeof(bd718xx_powerkey_data), |
| }, |
| { .name = "bd71837-clk", }, |
| { .name = "bd71837-pmic", }, |
| }; |
| |
| static const struct regmap_irq bd71837_irqs[] = { |
| REGMAP_IRQ_REG(BD71837_INT_SWRST, 0, BD71837_INT_SWRST_MASK), |
| REGMAP_IRQ_REG(BD71837_INT_PWRBTN_S, 0, BD71837_INT_PWRBTN_S_MASK), |
| REGMAP_IRQ_REG(BD71837_INT_PWRBTN_L, 0, BD71837_INT_PWRBTN_L_MASK), |
| REGMAP_IRQ_REG(BD71837_INT_PWRBTN, 0, BD71837_INT_PWRBTN_MASK), |
| REGMAP_IRQ_REG(BD71837_INT_WDOG, 0, BD71837_INT_WDOG_MASK), |
| REGMAP_IRQ_REG(BD71837_INT_ON_REQ, 0, BD71837_INT_ON_REQ_MASK), |
| REGMAP_IRQ_REG(BD71837_INT_STBY_REQ, 0, BD71837_INT_STBY_REQ_MASK), |
| }; |
| |
| static struct regmap_irq_chip bd71837_irq_chip = { |
| .name = "bd71837-irq", |
| .irqs = bd71837_irqs, |
| .num_irqs = ARRAY_SIZE(bd71837_irqs), |
| .num_regs = 1, |
| .irq_reg_stride = 1, |
| .status_base = BD71837_REG_IRQ, |
| .mask_base = BD71837_REG_MIRQ, |
| .ack_base = BD71837_REG_IRQ, |
| .init_ack_masked = true, |
| .mask_invert = false, |
| }; |
| |
| static const struct regmap_range pmic_status_range = { |
| .range_min = BD71837_REG_IRQ, |
| .range_max = BD71837_REG_POW_STATE, |
| }; |
| |
| static const struct regmap_access_table volatile_regs = { |
| .yes_ranges = &pmic_status_range, |
| .n_yes_ranges = 1, |
| }; |
| |
| static const struct regmap_config bd71837_regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| .volatile_table = &volatile_regs, |
| .max_register = BD71837_MAX_REGISTER - 1, |
| .cache_type = REGCACHE_RBTREE, |
| }; |
| |
| static int bd71837_i2c_probe(struct i2c_client *i2c, |
| const struct i2c_device_id *id) |
| { |
| struct bd71837 *bd71837; |
| int ret, i; |
| unsigned int val; |
| |
| bd71837 = devm_kzalloc(&i2c->dev, sizeof(struct bd71837), GFP_KERNEL); |
| |
| if (!bd71837) |
| return -ENOMEM; |
| |
| bd71837->chip_irq = i2c->irq; |
| |
| if (!bd71837->chip_irq) { |
| dev_err(&i2c->dev, "No IRQ configured\n"); |
| return -EINVAL; |
| } |
| |
| bd71837->dev = &i2c->dev; |
| dev_set_drvdata(&i2c->dev, bd71837); |
| |
| bd71837->regmap = devm_regmap_init_i2c(i2c, &bd71837_regmap_config); |
| if (IS_ERR(bd71837->regmap)) { |
| dev_err(&i2c->dev, "regmap initialization failed\n"); |
| return PTR_ERR(bd71837->regmap); |
| } |
| |
| ret = regmap_read(bd71837->regmap, BD71837_REG_REV, &val); |
| if (ret) { |
| dev_err(&i2c->dev, "Read BD71837_REG_DEVICE failed\n"); |
| return ret; |
| } |
| for (i = 0; i < ARRAY_SIZE(supported_revisions); i++) |
| if (supported_revisions[i] == val) |
| break; |
| |
| if (i == ARRAY_SIZE(supported_revisions)) { |
| dev_err(&i2c->dev, "Unsupported chip revision\n"); |
| return -ENODEV; |
| } |
| |
| ret = devm_regmap_add_irq_chip(&i2c->dev, bd71837->regmap, |
| bd71837->chip_irq, IRQF_ONESHOT, 0, |
| &bd71837_irq_chip, &bd71837->irq_data); |
| if (ret) { |
| dev_err(&i2c->dev, "Failed to add irq_chip\n"); |
| return ret; |
| } |
| |
| /* Configure short press to 10 milliseconds */ |
| ret = regmap_update_bits(bd71837->regmap, |
| BD71837_REG_PWRONCONFIG0, |
| BD718XX_PWRBTN_PRESS_DURATION_MASK, |
| BD718XX_PWRBTN_SHORT_PRESS_10MS); |
| if (ret) { |
| dev_err(&i2c->dev, |
| "Failed to configure button short press timeout\n"); |
| return ret; |
| } |
| |
| /* Configure long press to 10 seconds */ |
| ret = regmap_update_bits(bd71837->regmap, |
| BD71837_REG_PWRONCONFIG1, |
| BD718XX_PWRBTN_PRESS_DURATION_MASK, |
| BD718XX_PWRBTN_LONG_PRESS_10S); |
| |
| if (ret) { |
| dev_err(&i2c->dev, |
| "Failed to configure button long press timeout\n"); |
| return ret; |
| } |
| |
| ret = regmap_irq_get_virq(bd71837->irq_data, BD71837_INT_PWRBTN_S); |
| |
| if (ret < 0) { |
| dev_err(&i2c->dev, "Failed to get the IRQ\n"); |
| return ret; |
| } |
| |
| button.irq = ret; |
| |
| ret = devm_mfd_add_devices(bd71837->dev, PLATFORM_DEVID_AUTO, |
| bd71837_mfd_cells, |
| ARRAY_SIZE(bd71837_mfd_cells), NULL, 0, |
| regmap_irq_get_domain(bd71837->irq_data)); |
| if (ret) |
| dev_err(&i2c->dev, "Failed to create subdevices\n"); |
| |
| return ret; |
| } |
| |
| static const struct of_device_id bd71837_of_match[] = { |
| { .compatible = "rohm,bd71837", }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, bd71837_of_match); |
| |
| static struct i2c_driver bd71837_i2c_driver = { |
| .driver = { |
| .name = "rohm-bd718x7", |
| .of_match_table = bd71837_of_match, |
| }, |
| .probe = bd71837_i2c_probe, |
| }; |
| |
| static int __init bd71837_i2c_init(void) |
| { |
| return i2c_add_driver(&bd71837_i2c_driver); |
| } |
| |
| /* Initialise early so consumer devices can complete system boot */ |
| subsys_initcall(bd71837_i2c_init); |
| |
| static void __exit bd71837_i2c_exit(void) |
| { |
| i2c_del_driver(&bd71837_i2c_driver); |
| } |
| module_exit(bd71837_i2c_exit); |
| |
| MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>"); |
| MODULE_DESCRIPTION("ROHM BD71837 Power Management IC driver"); |
| MODULE_LICENSE("GPL"); |