| /* |
| * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org> |
| * Parts of this file were based on sources as follows: |
| * |
| * Copyright (C) 2006-2008 Intel Corporation |
| * Copyright (C) 2007 Amos Lee <amos_lee@storlinksemi.com> |
| * Copyright (C) 2007 Dave Airlie <airlied@linux.ie> |
| * Copyright (C) 2011 Texas Instruments |
| * Copyright (C) 2017 Eric Anholt |
| * |
| * This program is free software and is provided to you under the terms of the |
| * GNU General Public License version 2 as published by the Free Software |
| * Foundation, and any use by you of this program is subject to the terms of |
| * such GNU licence. |
| */ |
| |
| #ifndef _TVE200_DRM_H_ |
| #define _TVE200_DRM_H_ |
| |
| /* Bits 2-31 are valid physical base addresses */ |
| #define TVE200_Y_FRAME_BASE_ADDR 0x00 |
| #define TVE200_U_FRAME_BASE_ADDR 0x04 |
| #define TVE200_V_FRAME_BASE_ADDR 0x08 |
| |
| #define TVE200_INT_EN 0x0C |
| #define TVE200_INT_CLR 0x10 |
| #define TVE200_INT_STAT 0x14 |
| #define TVE200_INT_BUS_ERR BIT(7) |
| #define TVE200_INT_V_STATUS BIT(6) /* vertical blank */ |
| #define TVE200_INT_V_NEXT_FRAME BIT(5) |
| #define TVE200_INT_U_NEXT_FRAME BIT(4) |
| #define TVE200_INT_Y_NEXT_FRAME BIT(3) |
| #define TVE200_INT_V_FIFO_UNDERRUN BIT(2) |
| #define TVE200_INT_U_FIFO_UNDERRUN BIT(1) |
| #define TVE200_INT_Y_FIFO_UNDERRUN BIT(0) |
| #define TVE200_FIFO_UNDERRUNS (TVE200_INT_V_FIFO_UNDERRUN | \ |
| TVE200_INT_U_FIFO_UNDERRUN | \ |
| TVE200_INT_Y_FIFO_UNDERRUN) |
| |
| #define TVE200_CTRL 0x18 |
| #define TVE200_CTRL_YUV420 BIT(31) |
| #define TVE200_CTRL_CSMODE BIT(30) |
| #define TVE200_CTRL_NONINTERLACE BIT(28) /* 0 = non-interlace CCIR656 */ |
| #define TVE200_CTRL_TVCLKP BIT(27) /* Inverted clock phase */ |
| /* Bits 24..26 define the burst size after arbitration on the bus */ |
| #define TVE200_CTRL_BURST_4_WORDS (0 << 24) |
| #define TVE200_CTRL_BURST_8_WORDS (1 << 24) |
| #define TVE200_CTRL_BURST_16_WORDS (2 << 24) |
| #define TVE200_CTRL_BURST_32_WORDS (3 << 24) |
| #define TVE200_CTRL_BURST_64_WORDS (4 << 24) |
| #define TVE200_CTRL_BURST_128_WORDS (5 << 24) |
| #define TVE200_CTRL_BURST_256_WORDS (6 << 24) |
| #define TVE200_CTRL_BURST_0_WORDS (7 << 24) /* ? */ |
| /* |
| * Bits 16..23 is the retry count*16 before issueing a new AHB transfer |
| * on the AHB bus. |
| */ |
| #define TVE200_CTRL_RETRYCNT_MASK GENMASK(23, 16) |
| #define TVE200_CTRL_RETRYCNT_16 (1 << 16) |
| #define TVE200_CTRL_BBBP BIT(15) /* 0 = little-endian */ |
| /* Bits 12..14 define the YCbCr ordering */ |
| #define TVE200_CTRL_YCBCRODR_CB0Y0CR0Y1 (0 << 12) |
| #define TVE200_CTRL_YCBCRODR_Y0CB0Y1CR0 (1 << 12) |
| #define TVE200_CTRL_YCBCRODR_CR0Y0CB0Y1 (2 << 12) |
| #define TVE200_CTRL_YCBCRODR_Y1CB0Y0CR0 (3 << 12) |
| #define TVE200_CTRL_YCBCRODR_CR0Y1CB0Y0 (4 << 12) |
| #define TVE200_CTRL_YCBCRODR_Y1CR0Y0CB0 (5 << 12) |
| #define TVE200_CTRL_YCBCRODR_CB0Y1CR0Y0 (6 << 12) |
| #define TVE200_CTRL_YCBCRODR_Y0CR0Y1CB0 (7 << 12) |
| /* Bits 10..11 define the input resolution (framebuffer size) */ |
| #define TVE200_CTRL_IPRESOL_CIF (0 << 10) |
| #define TVE200_CTRL_IPRESOL_VGA (1 << 10) |
| #define TVE200_CTRL_IPRESOL_D1 (2 << 10) |
| #define TVE200_CTRL_NTSC BIT(9) /* 0 = PAL, 1 = NTSC */ |
| #define TVE200_CTRL_INTERLACE BIT(8) /* 1 = interlace, only for D1 */ |
| #define TVE200_IPDMOD_RGB555 (0 << 6) /* TVE200_CTRL_YUV420 = 0 */ |
| #define TVE200_IPDMOD_RGB565 (1 << 6) |
| #define TVE200_IPDMOD_RGB888 (2 << 6) |
| #define TVE200_IPDMOD_YUV420 (2 << 6) /* TVE200_CTRL_YUV420 = 1 */ |
| #define TVE200_IPDMOD_YUV422 (3 << 6) |
| /* Bits 4 & 5 define when to fire the vblank IRQ */ |
| #define TVE200_VSTSTYPE_VSYNC (0 << 4) /* start of vsync */ |
| #define TVE200_VSTSTYPE_VBP (1 << 4) /* start of v back porch */ |
| #define TVE200_VSTSTYPE_VAI (2 << 4) /* start of v active image */ |
| #define TVE200_VSTSTYPE_VFP (3 << 4) /* start of v front porch */ |
| #define TVE200_VSTSTYPE_BITS (BIT(4) | BIT(5)) |
| #define TVE200_BGR BIT(1) /* 0 = RGB, 1 = BGR */ |
| #define TVE200_TVEEN BIT(0) /* Enable TVE block */ |
| |
| #define TVE200_CTRL_2 0x1c |
| #define TVE200_CTRL_3 0x20 |
| |
| #define TVE200_CTRL_4 0x24 |
| #define TVE200_CTRL_4_RESET BIT(0) /* triggers reset of TVE200 */ |
| |
| #include <drm/drm_gem.h> |
| #include <drm/drm_simple_kms_helper.h> |
| |
| struct tve200_drm_dev_private { |
| struct drm_device *drm; |
| |
| struct drm_connector *connector; |
| struct drm_panel *panel; |
| struct drm_bridge *bridge; |
| struct drm_simple_display_pipe pipe; |
| |
| void *regs; |
| struct clk *pclk; |
| struct clk *clk; |
| }; |
| |
| #define to_tve200_connector(x) \ |
| container_of(x, struct tve200_drm_connector, connector) |
| |
| int tve200_display_init(struct drm_device *dev); |
| irqreturn_t tve200_irq(int irq, void *data); |
| int tve200_connector_init(struct drm_device *dev); |
| int tve200_encoder_init(struct drm_device *dev); |
| int tve200_dumb_create(struct drm_file *file_priv, |
| struct drm_device *dev, |
| struct drm_mode_create_dumb *args); |
| |
| #endif /* _TVE200_DRM_H_ */ |