| // SPDX-License-Identifier: GPL-2.0 |
| #include <linux/linkage.h> |
| #include <linux/errno.h> |
| #include <linux/signal.h> |
| #include <linux/sched.h> |
| #include <linux/ioport.h> |
| #include <linux/interrupt.h> |
| #include <linux/irq.h> |
| #include <linux/timex.h> |
| #include <linux/random.h> |
| #include <linux/init.h> |
| #include <linux/kernel_stat.h> |
| #include <linux/syscore_ops.h> |
| #include <linux/bitops.h> |
| #include <linux/acpi.h> |
| #include <linux/io.h> |
| #include <linux/delay.h> |
| |
| #include <linux/atomic.h> |
| #include <asm/timer.h> |
| #include <asm/hw_irq.h> |
| #include <asm/pgtable.h> |
| #include <asm/desc.h> |
| #include <asm/apic.h> |
| #include <asm/i8259.h> |
| |
| /* |
| * This is the 'legacy' 8259A Programmable Interrupt Controller, |
| * present in the majority of PC/AT boxes. |
| * plus some generic x86 specific things if generic specifics makes |
| * any sense at all. |
| */ |
| static void init_8259A(int auto_eoi); |
| |
| static int i8259A_auto_eoi; |
| DEFINE_RAW_SPINLOCK(i8259A_lock); |
| |
| /* |
| * 8259A PIC functions to handle ISA devices: |
| */ |
| |
| /* |
| * This contains the irq mask for both 8259A irq controllers, |
| */ |
| unsigned int cached_irq_mask = 0xffff; |
| |
| /* |
| * Not all IRQs can be routed through the IO-APIC, eg. on certain (older) |
| * boards the timer interrupt is not really connected to any IO-APIC pin, |
| * it's fed to the master 8259A's IR0 line only. |
| * |
| * Any '1' bit in this mask means the IRQ is routed through the IO-APIC. |
| * this 'mixed mode' IRQ handling costs nothing because it's only used |
| * at IRQ setup time. |
| */ |
| unsigned long io_apic_irqs; |
| |
| static void mask_8259A_irq(unsigned int irq) |
| { |
| unsigned int mask = 1 << irq; |
| unsigned long flags; |
| |
| raw_spin_lock_irqsave(&i8259A_lock, flags); |
| cached_irq_mask |= mask; |
| if (irq & 8) |
| outb(cached_slave_mask, PIC_SLAVE_IMR); |
| else |
| outb(cached_master_mask, PIC_MASTER_IMR); |
| raw_spin_unlock_irqrestore(&i8259A_lock, flags); |
| } |
| |
| static void disable_8259A_irq(struct irq_data *data) |
| { |
| mask_8259A_irq(data->irq); |
| } |
| |
| static void unmask_8259A_irq(unsigned int irq) |
| { |
| unsigned int mask = ~(1 << irq); |
| unsigned long flags; |
| |
| raw_spin_lock_irqsave(&i8259A_lock, flags); |
| cached_irq_mask &= mask; |
| if (irq & 8) |
| outb(cached_slave_mask, PIC_SLAVE_IMR); |
| else |
| outb(cached_master_mask, PIC_MASTER_IMR); |
| raw_spin_unlock_irqrestore(&i8259A_lock, flags); |
| } |
| |
| static void enable_8259A_irq(struct irq_data *data) |
| { |
| unmask_8259A_irq(data->irq); |
| } |
| |
| static int i8259A_irq_pending(unsigned int irq) |
| { |
| unsigned int mask = 1<<irq; |
| unsigned long flags; |
| int ret; |
| |
| raw_spin_lock_irqsave(&i8259A_lock, flags); |
| if (irq < 8) |
| ret = inb(PIC_MASTER_CMD) & mask; |
| else |
| ret = inb(PIC_SLAVE_CMD) & (mask >> 8); |
| raw_spin_unlock_irqrestore(&i8259A_lock, flags); |
| |
| return ret; |
| } |
| |
| static void make_8259A_irq(unsigned int irq) |
| { |
| disable_irq_nosync(irq); |
| io_apic_irqs &= ~(1<<irq); |
| irq_set_chip_and_handler(irq, &i8259A_chip, handle_level_irq); |
| enable_irq(irq); |
| lapic_assign_legacy_vector(irq, true); |
| } |
| |
| /* |
| * This function assumes to be called rarely. Switching between |
| * 8259A registers is slow. |
| * This has to be protected by the irq controller spinlock |
| * before being called. |
| */ |
| static inline int i8259A_irq_real(unsigned int irq) |
| { |
| int value; |
| int irqmask = 1<<irq; |
| |
| if (irq < 8) { |
| outb(0x0B, PIC_MASTER_CMD); /* ISR register */ |
| value = inb(PIC_MASTER_CMD) & irqmask; |
| outb(0x0A, PIC_MASTER_CMD); /* back to the IRR register */ |
| return value; |
| } |
| outb(0x0B, PIC_SLAVE_CMD); /* ISR register */ |
| value = inb(PIC_SLAVE_CMD) & (irqmask >> 8); |
| outb(0x0A, PIC_SLAVE_CMD); /* back to the IRR register */ |
| return value; |
| } |
| |
| /* |
| * Careful! The 8259A is a fragile beast, it pretty |
| * much _has_ to be done exactly like this (mask it |
| * first, _then_ send the EOI, and the order of EOI |
| * to the two 8259s is important! |
| */ |
| static void mask_and_ack_8259A(struct irq_data *data) |
| { |
| unsigned int irq = data->irq; |
| unsigned int irqmask = 1 << irq; |
| unsigned long flags; |
| |
| raw_spin_lock_irqsave(&i8259A_lock, flags); |
| /* |
| * Lightweight spurious IRQ detection. We do not want |
| * to overdo spurious IRQ handling - it's usually a sign |
| * of hardware problems, so we only do the checks we can |
| * do without slowing down good hardware unnecessarily. |
| * |
| * Note that IRQ7 and IRQ15 (the two spurious IRQs |
| * usually resulting from the 8259A-1|2 PICs) occur |
| * even if the IRQ is masked in the 8259A. Thus we |
| * can check spurious 8259A IRQs without doing the |
| * quite slow i8259A_irq_real() call for every IRQ. |
| * This does not cover 100% of spurious interrupts, |
| * but should be enough to warn the user that there |
| * is something bad going on ... |
| */ |
| if (cached_irq_mask & irqmask) |
| goto spurious_8259A_irq; |
| cached_irq_mask |= irqmask; |
| |
| handle_real_irq: |
| if (irq & 8) { |
| inb(PIC_SLAVE_IMR); /* DUMMY - (do we need this?) */ |
| outb(cached_slave_mask, PIC_SLAVE_IMR); |
| /* 'Specific EOI' to slave */ |
| outb(0x60+(irq&7), PIC_SLAVE_CMD); |
| /* 'Specific EOI' to master-IRQ2 */ |
| outb(0x60+PIC_CASCADE_IR, PIC_MASTER_CMD); |
| } else { |
| inb(PIC_MASTER_IMR); /* DUMMY - (do we need this?) */ |
| outb(cached_master_mask, PIC_MASTER_IMR); |
| outb(0x60+irq, PIC_MASTER_CMD); /* 'Specific EOI to master */ |
| } |
| raw_spin_unlock_irqrestore(&i8259A_lock, flags); |
| return; |
| |
| spurious_8259A_irq: |
| /* |
| * this is the slow path - should happen rarely. |
| */ |
| if (i8259A_irq_real(irq)) |
| /* |
| * oops, the IRQ _is_ in service according to the |
| * 8259A - not spurious, go handle it. |
| */ |
| goto handle_real_irq; |
| |
| { |
| static int spurious_irq_mask; |
| /* |
| * At this point we can be sure the IRQ is spurious, |
| * lets ACK and report it. [once per IRQ] |
| */ |
| if (!(spurious_irq_mask & irqmask)) { |
| printk(KERN_DEBUG |
| "spurious 8259A interrupt: IRQ%d.\n", irq); |
| spurious_irq_mask |= irqmask; |
| } |
| atomic_inc(&irq_err_count); |
| /* |
| * Theoretically we do not have to handle this IRQ, |
| * but in Linux this does not cause problems and is |
| * simpler for us. |
| */ |
| goto handle_real_irq; |
| } |
| } |
| |
| struct irq_chip i8259A_chip = { |
| .name = "XT-PIC", |
| .irq_mask = disable_8259A_irq, |
| .irq_disable = disable_8259A_irq, |
| .irq_unmask = enable_8259A_irq, |
| .irq_mask_ack = mask_and_ack_8259A, |
| }; |
| |
| static char irq_trigger[2]; |
| /** |
| * ELCR registers (0x4d0, 0x4d1) control edge/level of IRQ |
| */ |
| static void restore_ELCR(char *trigger) |
| { |
| outb(trigger[0], 0x4d0); |
| outb(trigger[1], 0x4d1); |
| } |
| |
| static void save_ELCR(char *trigger) |
| { |
| /* IRQ 0,1,2,8,13 are marked as reserved */ |
| trigger[0] = inb(0x4d0) & 0xF8; |
| trigger[1] = inb(0x4d1) & 0xDE; |
| } |
| |
| static void i8259A_resume(void) |
| { |
| init_8259A(i8259A_auto_eoi); |
| restore_ELCR(irq_trigger); |
| } |
| |
| static int i8259A_suspend(void) |
| { |
| save_ELCR(irq_trigger); |
| return 0; |
| } |
| |
| static void i8259A_shutdown(void) |
| { |
| /* Put the i8259A into a quiescent state that |
| * the kernel initialization code can get it |
| * out of. |
| */ |
| outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */ |
| outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-2 */ |
| } |
| |
| static struct syscore_ops i8259_syscore_ops = { |
| .suspend = i8259A_suspend, |
| .resume = i8259A_resume, |
| .shutdown = i8259A_shutdown, |
| }; |
| |
| static void mask_8259A(void) |
| { |
| unsigned long flags; |
| |
| raw_spin_lock_irqsave(&i8259A_lock, flags); |
| |
| outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */ |
| outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-2 */ |
| |
| raw_spin_unlock_irqrestore(&i8259A_lock, flags); |
| } |
| |
| static void unmask_8259A(void) |
| { |
| unsigned long flags; |
| |
| raw_spin_lock_irqsave(&i8259A_lock, flags); |
| |
| outb(cached_master_mask, PIC_MASTER_IMR); /* restore master IRQ mask */ |
| outb(cached_slave_mask, PIC_SLAVE_IMR); /* restore slave IRQ mask */ |
| |
| raw_spin_unlock_irqrestore(&i8259A_lock, flags); |
| } |
| |
| static int probe_8259A(void) |
| { |
| unsigned long flags; |
| unsigned char probe_val = ~(1 << PIC_CASCADE_IR); |
| unsigned char new_val; |
| /* |
| * Check to see if we have a PIC. |
| * Mask all except the cascade and read |
| * back the value we just wrote. If we don't |
| * have a PIC, we will read 0xff as opposed to the |
| * value we wrote. |
| */ |
| raw_spin_lock_irqsave(&i8259A_lock, flags); |
| |
| outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-2 */ |
| outb(probe_val, PIC_MASTER_IMR); |
| new_val = inb(PIC_MASTER_IMR); |
| if (new_val != probe_val) { |
| printk(KERN_INFO "Using NULL legacy PIC\n"); |
| legacy_pic = &null_legacy_pic; |
| } |
| |
| raw_spin_unlock_irqrestore(&i8259A_lock, flags); |
| return nr_legacy_irqs(); |
| } |
| |
| static void init_8259A(int auto_eoi) |
| { |
| unsigned long flags; |
| |
| i8259A_auto_eoi = auto_eoi; |
| |
| raw_spin_lock_irqsave(&i8259A_lock, flags); |
| |
| outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */ |
| |
| /* |
| * outb_pic - this has to work on a wide range of PC hardware. |
| */ |
| outb_pic(0x11, PIC_MASTER_CMD); /* ICW1: select 8259A-1 init */ |
| |
| /* ICW2: 8259A-1 IR0-7 mapped to ISA_IRQ_VECTOR(0) */ |
| outb_pic(ISA_IRQ_VECTOR(0), PIC_MASTER_IMR); |
| |
| /* 8259A-1 (the master) has a slave on IR2 */ |
| outb_pic(1U << PIC_CASCADE_IR, PIC_MASTER_IMR); |
| |
| if (auto_eoi) /* master does Auto EOI */ |
| outb_pic(MASTER_ICW4_DEFAULT | PIC_ICW4_AEOI, PIC_MASTER_IMR); |
| else /* master expects normal EOI */ |
| outb_pic(MASTER_ICW4_DEFAULT, PIC_MASTER_IMR); |
| |
| outb_pic(0x11, PIC_SLAVE_CMD); /* ICW1: select 8259A-2 init */ |
| |
| /* ICW2: 8259A-2 IR0-7 mapped to ISA_IRQ_VECTOR(8) */ |
| outb_pic(ISA_IRQ_VECTOR(8), PIC_SLAVE_IMR); |
| /* 8259A-2 is a slave on master's IR2 */ |
| outb_pic(PIC_CASCADE_IR, PIC_SLAVE_IMR); |
| /* (slave's support for AEOI in flat mode is to be investigated) */ |
| outb_pic(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR); |
| |
| if (auto_eoi) |
| /* |
| * In AEOI mode we just have to mask the interrupt |
| * when acking. |
| */ |
| i8259A_chip.irq_mask_ack = disable_8259A_irq; |
| else |
| i8259A_chip.irq_mask_ack = mask_and_ack_8259A; |
| |
| udelay(100); /* wait for 8259A to initialize */ |
| |
| outb(cached_master_mask, PIC_MASTER_IMR); /* restore master IRQ mask */ |
| outb(cached_slave_mask, PIC_SLAVE_IMR); /* restore slave IRQ mask */ |
| |
| raw_spin_unlock_irqrestore(&i8259A_lock, flags); |
| } |
| |
| /* |
| * make i8259 a driver so that we can select pic functions at run time. the goal |
| * is to make x86 binary compatible among pc compatible and non-pc compatible |
| * platforms, such as x86 MID. |
| */ |
| |
| static void legacy_pic_noop(void) { }; |
| static void legacy_pic_uint_noop(unsigned int unused) { }; |
| static void legacy_pic_int_noop(int unused) { }; |
| static int legacy_pic_irq_pending_noop(unsigned int irq) |
| { |
| return 0; |
| } |
| static int legacy_pic_probe(void) |
| { |
| return 0; |
| } |
| |
| struct legacy_pic null_legacy_pic = { |
| .nr_legacy_irqs = 0, |
| .chip = &dummy_irq_chip, |
| .mask = legacy_pic_uint_noop, |
| .unmask = legacy_pic_uint_noop, |
| .mask_all = legacy_pic_noop, |
| .restore_mask = legacy_pic_noop, |
| .init = legacy_pic_int_noop, |
| .probe = legacy_pic_probe, |
| .irq_pending = legacy_pic_irq_pending_noop, |
| .make_irq = legacy_pic_uint_noop, |
| }; |
| |
| struct legacy_pic default_legacy_pic = { |
| .nr_legacy_irqs = NR_IRQS_LEGACY, |
| .chip = &i8259A_chip, |
| .mask = mask_8259A_irq, |
| .unmask = unmask_8259A_irq, |
| .mask_all = mask_8259A, |
| .restore_mask = unmask_8259A, |
| .init = init_8259A, |
| .probe = probe_8259A, |
| .irq_pending = i8259A_irq_pending, |
| .make_irq = make_8259A_irq, |
| }; |
| |
| struct legacy_pic *legacy_pic = &default_legacy_pic; |
| EXPORT_SYMBOL(legacy_pic); |
| |
| static int __init i8259A_init_ops(void) |
| { |
| if (legacy_pic == &default_legacy_pic) |
| register_syscore_ops(&i8259_syscore_ops); |
| |
| return 0; |
| } |
| |
| device_initcall(i8259A_init_ops); |