| /* |
| * The code contained herein is licensed under the GNU General Public |
| * License. You may obtain a copy of the GNU General Public License |
| * Version 2 or later at the following locations: |
| * |
| * http://www.opensource.org/licenses/gpl-license.html |
| * http://www.gnu.org/copyleft/gpl.html |
| */ |
| |
| #include "imx27-phytec-phycore-som.dtsi" |
| |
| / { |
| model = "Phytec pcm970"; |
| compatible = "phytec,imx27-pcm970", "phytec,imx27-pcm038", "fsl,imx27"; |
| |
| chosen { |
| stdout-path = &uart1; |
| }; |
| |
| display0: LQ035Q7 { |
| model = "Sharp-LQ035Q7"; |
| native-mode = <&timing0>; |
| bits-per-pixel = <16>; |
| fsl,pcr = <0xf00080c0>; |
| |
| display-timings { |
| timing0: 240x320 { |
| clock-frequency = <5500000>; |
| hactive = <240>; |
| vactive = <320>; |
| hback-porch = <5>; |
| hsync-len = <7>; |
| hfront-porch = <16>; |
| vback-porch = <7>; |
| vsync-len = <1>; |
| vfront-porch = <9>; |
| pixelclk-active = <1>; |
| hsync-active = <1>; |
| vsync-active = <1>; |
| de-active = <0>; |
| }; |
| }; |
| }; |
| |
| regulators { |
| regulator@2 { |
| compatible = "regulator-fixed"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_csien>; |
| reg = <2>; |
| regulator-name = "CSI_EN"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| gpio = <&gpio2 24 GPIO_ACTIVE_LOW>; |
| regulator-always-on; |
| }; |
| }; |
| |
| usbphy { |
| usbphy2: usbphy@2 { |
| compatible = "usb-nop-xceiv"; |
| reg = <2>; |
| vcc-supply = <®_5v0>; |
| clocks = <&clks IMX27_CLK_DUMMY>; |
| clock-names = "main_clk"; |
| #phy-cells = <0>; |
| }; |
| }; |
| }; |
| |
| &cspi1 { |
| pinctrl-0 = <&pinctrl_cspi1>, <&pinctrl_cspi1cs1>; |
| cs-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>, |
| <&gpio4 27 GPIO_ACTIVE_LOW>; |
| }; |
| |
| &fb { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_imxfb1>; |
| display = <&display0>; |
| lcd-supply = <®_5v0>; |
| fsl,dmacr = <0x00020010>; |
| fsl,lscr1 = <0x00120300>; |
| fsl,lpccr = <0x00a903ff>; |
| status = "okay"; |
| }; |
| |
| &i2c1 { |
| clock-frequency = <400000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c1>; |
| status = "okay"; |
| |
| camgpio: pca9536@41 { |
| compatible = "nxp,pca9536"; |
| reg = <0x41>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| }; |
| |
| &iomuxc { |
| imx27_phycore_rdk { |
| pinctrl_csien: csiengrp { |
| fsl,pins = < |
| MX27_PAD_USB_OC_B__GPIO2_24 0x0 |
| >; |
| }; |
| |
| pinctrl_cspi1cs1: cspi1cs1grp { |
| fsl,pins = < |
| MX27_PAD_CSPI1_SS1__GPIO4_27 0x0 |
| >; |
| }; |
| |
| pinctrl_imxfb1: imxfbgrp { |
| fsl,pins = < |
| MX27_PAD_LD0__LD0 0x0 |
| MX27_PAD_LD1__LD1 0x0 |
| MX27_PAD_LD2__LD2 0x0 |
| MX27_PAD_LD3__LD3 0x0 |
| MX27_PAD_LD4__LD4 0x0 |
| MX27_PAD_LD5__LD5 0x0 |
| MX27_PAD_LD6__LD6 0x0 |
| MX27_PAD_LD7__LD7 0x0 |
| MX27_PAD_LD8__LD8 0x0 |
| MX27_PAD_LD9__LD9 0x0 |
| MX27_PAD_LD10__LD10 0x0 |
| MX27_PAD_LD11__LD11 0x0 |
| MX27_PAD_LD12__LD12 0x0 |
| MX27_PAD_LD13__LD13 0x0 |
| MX27_PAD_LD14__LD14 0x0 |
| MX27_PAD_LD15__LD15 0x0 |
| MX27_PAD_LD16__LD16 0x0 |
| MX27_PAD_LD17__LD17 0x0 |
| MX27_PAD_CLS__CLS 0x0 |
| MX27_PAD_CONTRAST__CONTRAST 0x0 |
| MX27_PAD_LSCLK__LSCLK 0x0 |
| MX27_PAD_OE_ACD__OE_ACD 0x0 |
| MX27_PAD_PS__PS 0x0 |
| MX27_PAD_REV__REV 0x0 |
| MX27_PAD_SPL_SPR__SPL_SPR 0x0 |
| MX27_PAD_HSYNC__HSYNC 0x0 |
| MX27_PAD_VSYNC__VSYNC 0x0 |
| >; |
| }; |
| |
| pinctrl_i2c1: i2c1grp { |
| /* Add pullup to DATA line */ |
| fsl,pins = < |
| MX27_PAD_I2C_DATA__I2C_DATA 0x1 |
| MX27_PAD_I2C_CLK__I2C_CLK 0x0 |
| >; |
| }; |
| |
| pinctrl_owire1: owire1grp { |
| fsl,pins = < |
| MX27_PAD_RTCK__OWIRE 0x0 |
| >; |
| }; |
| |
| pinctrl_sdhc2: sdhc2grp { |
| fsl,pins = < |
| MX27_PAD_SD2_CLK__SD2_CLK 0x0 |
| MX27_PAD_SD2_CMD__SD2_CMD 0x0 |
| MX27_PAD_SD2_D0__SD2_D0 0x0 |
| MX27_PAD_SD2_D1__SD2_D1 0x0 |
| MX27_PAD_SD2_D2__SD2_D2 0x0 |
| MX27_PAD_SD2_D3__SD2_D3 0x0 |
| MX27_PAD_SSI3_FS__GPIO3_28 0x0 /* WP */ |
| MX27_PAD_SSI3_RXDAT__GPIO3_29 0x0 /* CD */ |
| >; |
| }; |
| |
| pinctrl_uart1: uart1grp { |
| fsl,pins = < |
| MX27_PAD_UART1_TXD__UART1_TXD 0x0 |
| MX27_PAD_UART1_RXD__UART1_RXD 0x0 |
| MX27_PAD_UART1_CTS__UART1_CTS 0x0 |
| MX27_PAD_UART1_RTS__UART1_RTS 0x0 |
| >; |
| }; |
| |
| pinctrl_uart2: uart2grp { |
| fsl,pins = < |
| MX27_PAD_UART2_TXD__UART2_TXD 0x0 |
| MX27_PAD_UART2_RXD__UART2_RXD 0x0 |
| MX27_PAD_UART2_CTS__UART2_CTS 0x0 |
| MX27_PAD_UART2_RTS__UART2_RTS 0x0 |
| >; |
| }; |
| |
| pinctrl_usbh2: usbh2grp { |
| fsl,pins = < |
| MX27_PAD_USBH2_CLK__USBH2_CLK 0x0 |
| MX27_PAD_USBH2_DIR__USBH2_DIR 0x0 |
| MX27_PAD_USBH2_NXT__USBH2_NXT 0x0 |
| MX27_PAD_USBH2_STP__USBH2_STP 0x0 |
| MX27_PAD_CSPI2_SCLK__USBH2_DATA0 0x0 |
| MX27_PAD_CSPI2_MOSI__USBH2_DATA1 0x0 |
| MX27_PAD_CSPI2_MISO__USBH2_DATA2 0x0 |
| MX27_PAD_CSPI2_SS1__USBH2_DATA3 0x0 |
| MX27_PAD_CSPI2_SS2__USBH2_DATA4 0x0 |
| MX27_PAD_CSPI1_SS2__USBH2_DATA5 0x0 |
| MX27_PAD_CSPI2_SS0__USBH2_DATA6 0x0 |
| MX27_PAD_USBH2_DATA7__USBH2_DATA7 0x0 |
| >; |
| }; |
| |
| pinctrl_weim: weimgrp { |
| fsl,pins = < |
| MX27_PAD_CS4_B__CS4_B 0x0 /* CS4 */ |
| MX27_PAD_SD1_D1__GPIO5_19 0x0 /* CAN IRQ */ |
| >; |
| }; |
| }; |
| }; |
| |
| &owire { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_owire1>; |
| status = "okay"; |
| }; |
| |
| &pmicleds { |
| ledr1: led@3 { |
| reg = <3>; |
| label = "system:red1:user"; |
| }; |
| |
| ledg1: led@4 { |
| reg = <4>; |
| label = "system:green1:user"; |
| }; |
| |
| ledb1: led@5 { |
| reg = <5>; |
| label = "system:blue1:user"; |
| }; |
| |
| ledr2: led@6 { |
| reg = <6>; |
| label = "system:red2:user"; |
| }; |
| |
| ledg2: led@7 { |
| reg = <7>; |
| label = "system:green2:user"; |
| }; |
| |
| ledb2: led@8 { |
| reg = <8>; |
| label = "system:blue2:user"; |
| }; |
| |
| ledr3: led@9 { |
| reg = <9>; |
| label = "system:red3:nand"; |
| linux,default-trigger = "nand-disk"; |
| }; |
| |
| ledg3: led@10 { |
| reg = <10>; |
| label = "system:green3:live"; |
| linux,default-trigger = "heartbeat"; |
| }; |
| |
| ledb3: led@11 { |
| reg = <11>; |
| label = "system:blue3:cpu"; |
| linux,default-trigger = "cpu0"; |
| }; |
| }; |
| |
| &sdhci2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_sdhc2>; |
| bus-width = <4>; |
| cd-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>; |
| wp-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>; |
| vmmc-supply = <&vmmc1_reg>; |
| status = "okay"; |
| }; |
| |
| &uart1 { |
| uart-has-rtscts; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart1>; |
| status = "okay"; |
| }; |
| |
| &uart2 { |
| uart-has-rtscts; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart2>; |
| status = "okay"; |
| }; |
| |
| &usbh2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usbh2>; |
| dr_mode = "host"; |
| phy_type = "ulpi"; |
| vbus-supply = <®_5v0>; |
| fsl,usbphy = <&usbphy2>; |
| disable-over-current; |
| status = "okay"; |
| }; |
| |
| &weim { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_weim>; |
| |
| can@4,0 { |
| compatible = "nxp,sja1000"; |
| reg = <4 0x00000000 0x00000100>; |
| interrupt-parent = <&gpio5>; |
| interrupts = <19 IRQ_TYPE_EDGE_FALLING>; |
| nxp,external-clock-frequency = <16000000>; |
| nxp,tx-output-config = <0x16>; |
| nxp,no-comparator-bypass; |
| fsl,weim-cs-timing = <0x0000dcf6 0x444a0301 0x44443302>; |
| }; |
| }; |
