| /* |
| * GPIO and IRQ definitions for HTC Magician PDA phones |
| * |
| * Copyright (c) 2007 Philipp Zabel |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| */ |
| |
| #ifndef _MAGICIAN_H_ |
| #define _MAGICIAN_H_ |
| |
| #include <linux/gpio.h> |
| #include <mach/irqs.h> |
| |
| /* |
| * PXA GPIOs |
| */ |
| |
| #define GPIO0_MAGICIAN_KEY_POWER 0 |
| #define GPIO9_MAGICIAN_UNKNOWN 9 |
| #define GPIO10_MAGICIAN_GSM_IRQ 10 |
| #define GPIO11_MAGICIAN_GSM_OUT1 11 |
| #define GPIO13_MAGICIAN_CPLD_IRQ 13 |
| #define GPIO14_MAGICIAN_TSC2046_CS 14 |
| #define GPIO18_MAGICIAN_UNKNOWN 18 |
| #define GPIO22_MAGICIAN_VIBRA_EN 22 |
| #define GPIO26_MAGICIAN_GSM_POWER 26 |
| #define GPIO27_MAGICIAN_USBC_PUEN 27 |
| #define GPIO30_MAGICIAN_BQ24022_nCHARGE_EN 30 |
| #define GPIO37_MAGICIAN_KEY_HANGUP 37 |
| #define GPIO38_MAGICIAN_KEY_CONTACTS 38 |
| #define GPIO40_MAGICIAN_GSM_OUT2 40 |
| #define GPIO48_MAGICIAN_UNKNOWN 48 |
| #define GPIO56_MAGICIAN_UNKNOWN 56 |
| #define GPIO57_MAGICIAN_CAM_RESET 57 |
| #define GPIO75_MAGICIAN_SAMSUNG_POWER 75 |
| #define GPIO83_MAGICIAN_nIR_EN 83 |
| #define GPIO86_MAGICIAN_GSM_RESET 86 |
| #define GPIO87_MAGICIAN_GSM_SELECT 87 |
| #define GPIO90_MAGICIAN_KEY_CALENDAR 90 |
| #define GPIO91_MAGICIAN_KEY_CAMERA 91 |
| #define GPIO93_MAGICIAN_KEY_UP 93 |
| #define GPIO94_MAGICIAN_KEY_DOWN 94 |
| #define GPIO95_MAGICIAN_KEY_LEFT 95 |
| #define GPIO96_MAGICIAN_KEY_RIGHT 96 |
| #define GPIO97_MAGICIAN_KEY_ENTER 97 |
| #define GPIO98_MAGICIAN_KEY_RECORD 98 |
| #define GPIO99_MAGICIAN_HEADPHONE_IN 99 |
| #define GPIO100_MAGICIAN_KEY_VOL_UP 100 |
| #define GPIO101_MAGICIAN_KEY_VOL_DOWN 101 |
| #define GPIO102_MAGICIAN_KEY_PHONE 102 |
| #define GPIO103_MAGICIAN_LED_KP 103 |
| #define GPIO104_MAGICIAN_LCD_VOFF_EN 104 |
| #define GPIO105_MAGICIAN_LCD_VON_EN 105 |
| #define GPIO106_MAGICIAN_LCD_DCDC_NRESET 106 |
| #define GPIO107_MAGICIAN_DS1WM_IRQ 107 |
| #define GPIO108_MAGICIAN_GSM_READY 108 |
| #define GPIO114_MAGICIAN_UNKNOWN 114 |
| #define GPIO115_MAGICIAN_nPEN_IRQ 115 |
| #define GPIO116_MAGICIAN_nCAM_EN 116 |
| #define GPIO119_MAGICIAN_UNKNOWN 119 |
| #define GPIO120_MAGICIAN_UNKNOWN 120 |
| |
| /* |
| * CPLD IRQs |
| */ |
| |
| #define IRQ_MAGICIAN_SD (IRQ_BOARD_START + 0) |
| #define IRQ_MAGICIAN_EP (IRQ_BOARD_START + 1) |
| #define IRQ_MAGICIAN_BT (IRQ_BOARD_START + 2) |
| #define IRQ_MAGICIAN_VBUS (IRQ_BOARD_START + 3) |
| |
| #define MAGICIAN_NR_IRQS (IRQ_BOARD_START + 8) |
| |
| /* |
| * CPLD EGPIOs |
| */ |
| |
| #define MAGICIAN_EGPIO_BASE PXA_NR_BUILTIN_GPIO |
| #define MAGICIAN_EGPIO(reg,bit) \ |
| (MAGICIAN_EGPIO_BASE + 8*reg + bit) |
| |
| /* output */ |
| |
| #define EGPIO_MAGICIAN_TOPPOLY_POWER MAGICIAN_EGPIO(0, 2) |
| #define EGPIO_MAGICIAN_LED_POWER MAGICIAN_EGPIO(0, 5) |
| #define EGPIO_MAGICIAN_GSM_RESET MAGICIAN_EGPIO(0, 6) |
| #define EGPIO_MAGICIAN_LCD_POWER MAGICIAN_EGPIO(0, 7) |
| #define EGPIO_MAGICIAN_SPK_POWER MAGICIAN_EGPIO(1, 0) |
| #define EGPIO_MAGICIAN_EP_POWER MAGICIAN_EGPIO(1, 1) |
| #define EGPIO_MAGICIAN_IN_SEL0 MAGICIAN_EGPIO(1, 2) |
| #define EGPIO_MAGICIAN_IN_SEL1 MAGICIAN_EGPIO(1, 3) |
| #define EGPIO_MAGICIAN_MIC_POWER MAGICIAN_EGPIO(1, 4) |
| #define EGPIO_MAGICIAN_CODEC_RESET MAGICIAN_EGPIO(1, 5) |
| #define EGPIO_MAGICIAN_CODEC_POWER MAGICIAN_EGPIO(1, 6) |
| #define EGPIO_MAGICIAN_BL_POWER MAGICIAN_EGPIO(1, 7) |
| #define EGPIO_MAGICIAN_SD_POWER MAGICIAN_EGPIO(2, 0) |
| #define EGPIO_MAGICIAN_CARKIT_MIC MAGICIAN_EGPIO(2, 1) |
| #define EGPIO_MAGICIAN_IR_RX_SHUTDOWN MAGICIAN_EGPIO(2, 2) |
| #define EGPIO_MAGICIAN_FLASH_VPP MAGICIAN_EGPIO(2, 3) |
| #define EGPIO_MAGICIAN_BL_POWER2 MAGICIAN_EGPIO(2, 4) |
| #define EGPIO_MAGICIAN_BQ24022_ISET2 MAGICIAN_EGPIO(2, 5) |
| #define EGPIO_MAGICIAN_NICD_CHARGE MAGICIAN_EGPIO(2, 6) |
| #define EGPIO_MAGICIAN_GSM_POWER MAGICIAN_EGPIO(2, 7) |
| |
| /* input */ |
| |
| /* USB or AC charger type */ |
| #define EGPIO_MAGICIAN_CABLE_TYPE MAGICIAN_EGPIO(4, 0) |
| /* |
| * Vbus is detected |
| * FIXME behaves like (6,3), may differ for host/device |
| */ |
| #define EGPIO_MAGICIAN_CABLE_VBUS MAGICIAN_EGPIO(4, 1) |
| |
| #define EGPIO_MAGICIAN_BOARD_ID0 MAGICIAN_EGPIO(5, 0) |
| #define EGPIO_MAGICIAN_BOARD_ID1 MAGICIAN_EGPIO(5, 1) |
| #define EGPIO_MAGICIAN_BOARD_ID2 MAGICIAN_EGPIO(5, 2) |
| #define EGPIO_MAGICIAN_LCD_SELECT MAGICIAN_EGPIO(5, 3) |
| #define EGPIO_MAGICIAN_nSD_READONLY MAGICIAN_EGPIO(5, 4) |
| |
| #define EGPIO_MAGICIAN_EP_INSERT MAGICIAN_EGPIO(6, 1) |
| /* FIXME behaves like (4,1), may differ for host/device */ |
| #define EGPIO_MAGICIAN_CABLE_INSERTED MAGICIAN_EGPIO(6, 3) |
| |
| #endif /* _MAGICIAN_H_ */ |
