| * Renesas R-Car SATA |
| |
| Required properties: |
| - compatible : should contain one or more of the following: |
| - "renesas,sata-r8a7779" for R-Car H1 |
| - "renesas,sata-r8a7790-es1" for R-Car H2 ES1 |
| - "renesas,sata-r8a7790" for R-Car H2 other than ES1 |
| - "renesas,sata-r8a7791" for R-Car M2-W |
| - "renesas,sata-r8a7793" for R-Car M2-N |
| - "renesas,sata-r8a7795" for R-Car H3 |
| - "renesas,sata-r8a77965" for R-Car M3-N |
| - "renesas,rcar-gen2-sata" for a generic R-Car Gen2 compatible device |
| - "renesas,rcar-gen3-sata" for a generic R-Car Gen3 compatible device |
| - "renesas,rcar-sata" is deprecated |
| |
| When compatible with the generic version nodes |
| must list the SoC-specific version corresponding |
| to the platform first followed by the generic |
| version. |
| |
| - reg : address and length of the SATA registers; |
| - interrupts : must consist of one interrupt specifier. |
| - clocks : must contain a reference to the functional clock. |
| |
| Example: |
| |
| sata0: sata@ee300000 { |
| compatible = "renesas,sata-r8a7791", "renesas,rcar-gen2-sata"; |
| reg = <0 0xee300000 0 0x2000>; |
| interrupt-parent = <&gic>; |
| interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&mstp8_clks R8A7791_CLK_SATA0>; |
| }; |