| /* SPDX-License-Identifier: GPL-2.0 */ | |
| /* | |
| * ld script for the x86 kernel | |
| * | |
| * Historic 32-bit version written by Martin Mares <mj@atrey.karlin.mff.cuni.cz> | |
| * | |
| * Modernisation, unification and other changes and fixes: | |
| * Copyright (C) 2007-2009 Sam Ravnborg <sam@ravnborg.org> | |
| * | |
| * | |
| * Don't define absolute symbols until and unless you know that symbol | |
| * value is should remain constant even if kernel image is relocated | |
| * at run time. Absolute symbols are not relocated. If symbol value should | |
| * change if kernel is relocated, make the symbol section relative and | |
| * put it inside the section definition. | |
| */ | |
| #ifdef CONFIG_X86_32 | |
| #define LOAD_OFFSET __PAGE_OFFSET | |
| #else | |
| #define LOAD_OFFSET __START_KERNEL_map | |
| #endif | |
| #include <asm-generic/vmlinux.lds.h> | |
| #include <asm/asm-offsets.h> | |
| #include <asm/thread_info.h> | |
| #include <asm/page_types.h> | |
| #include <asm/orc_lookup.h> | |
| #include <asm/cache.h> | |
| #include <asm/boot.h> | |
| #undef i386 /* in case the preprocessor is a 32bit one */ | |
| OUTPUT_FORMAT(CONFIG_OUTPUT_FORMAT, CONFIG_OUTPUT_FORMAT, CONFIG_OUTPUT_FORMAT) | |
| #ifdef CONFIG_X86_32 | |
| OUTPUT_ARCH(i386) | |
| ENTRY(phys_startup_32) | |
| jiffies = jiffies_64; | |
| #else | |
| OUTPUT_ARCH(i386:x86-64) | |
| ENTRY(phys_startup_64) | |
| jiffies_64 = jiffies; | |
| #endif | |
| #if defined(CONFIG_X86_64) | |
| /* | |
| * On 64-bit, align RODATA to 2MB so we retain large page mappings for | |
| * boundaries spanning kernel text, rodata and data sections. | |
| * | |
| * However, kernel identity mappings will have different RWX permissions | |
| * to the pages mapping to text and to the pages padding (which are freed) the | |
| * text section. Hence kernel identity mappings will be broken to smaller | |
| * pages. For 64-bit, kernel text and kernel identity mappings are different, | |
| * so we can enable protection checks as well as retain 2MB large page | |
| * mappings for kernel text. | |
| */ | |
| #define X86_ALIGN_RODATA_BEGIN . = ALIGN(HPAGE_SIZE); | |
| #define X86_ALIGN_RODATA_END \ | |
| . = ALIGN(HPAGE_SIZE); \ | |
| __end_rodata_hpage_align = .; \ | |
| __end_rodata_aligned = .; | |
| #define ALIGN_ENTRY_TEXT_BEGIN . = ALIGN(PMD_SIZE); | |
| #define ALIGN_ENTRY_TEXT_END . = ALIGN(PMD_SIZE); | |
| /* | |
| * This section contains data which will be mapped as decrypted. Memory | |
| * encryption operates on a page basis. Make this section PMD-aligned | |
| * to avoid splitting the pages while mapping the section early. | |
| * | |
| * Note: We use a separate section so that only this section gets | |
| * decrypted to avoid exposing more than we wish. | |
| */ | |
| #define BSS_DECRYPTED \ | |
| . = ALIGN(PMD_SIZE); \ | |
| __start_bss_decrypted = .; \ | |
| *(.bss..decrypted); \ | |
| . = ALIGN(PAGE_SIZE); \ | |
| __start_bss_decrypted_unused = .; \ | |
| . = ALIGN(PMD_SIZE); \ | |
| __end_bss_decrypted = .; \ | |
| #else | |
| #define X86_ALIGN_RODATA_BEGIN | |
| #define X86_ALIGN_RODATA_END \ | |
| . = ALIGN(PAGE_SIZE); \ | |
| __end_rodata_aligned = .; | |
| #define ALIGN_ENTRY_TEXT_BEGIN | |
| #define ALIGN_ENTRY_TEXT_END | |
| #define BSS_DECRYPTED | |
| #endif | |
| PHDRS { | |
| text PT_LOAD FLAGS(5); /* R_E */ | |
| data PT_LOAD FLAGS(6); /* RW_ */ | |
| #ifdef CONFIG_X86_64 | |
| #ifdef CONFIG_SMP | |
| percpu PT_LOAD FLAGS(6); /* RW_ */ | |
| #endif | |
| init PT_LOAD FLAGS(7); /* RWE */ | |
| #endif | |
| note PT_NOTE FLAGS(0); /* ___ */ | |
| } | |
| SECTIONS | |
| { | |
| #ifdef CONFIG_X86_32 | |
| . = LOAD_OFFSET + LOAD_PHYSICAL_ADDR; | |
| phys_startup_32 = ABSOLUTE(startup_32 - LOAD_OFFSET); | |
| #else | |
| . = __START_KERNEL; | |
| phys_startup_64 = ABSOLUTE(startup_64 - LOAD_OFFSET); | |
| #endif | |
| /* Text and read-only data */ | |
| .text : AT(ADDR(.text) - LOAD_OFFSET) { | |
| _text = .; | |
| _stext = .; | |
| /* bootstrapping code */ | |
| HEAD_TEXT | |
| TEXT_TEXT | |
| SCHED_TEXT | |
| CPUIDLE_TEXT | |
| LOCK_TEXT | |
| KPROBES_TEXT | |
| ALIGN_ENTRY_TEXT_BEGIN | |
| ENTRY_TEXT | |
| IRQENTRY_TEXT | |
| ALIGN_ENTRY_TEXT_END | |
| SOFTIRQENTRY_TEXT | |
| *(.fixup) | |
| *(.gnu.warning) | |
| #ifdef CONFIG_X86_64 | |
| . = ALIGN(PAGE_SIZE); | |
| __entry_trampoline_start = .; | |
| _entry_trampoline = .; | |
| *(.entry_trampoline) | |
| . = ALIGN(PAGE_SIZE); | |
| __entry_trampoline_end = .; | |
| ASSERT(. - _entry_trampoline == PAGE_SIZE, "entry trampoline is too big"); | |
| #endif | |
| #ifdef CONFIG_RETPOLINE | |
| __indirect_thunk_start = .; | |
| *(.text.__x86.indirect_thunk) | |
| __indirect_thunk_end = .; | |
| #endif | |
| /* End of text section */ | |
| _etext = .; | |
| } :text = 0x9090 | |
| NOTES :text :note | |
| EXCEPTION_TABLE(16) :text = 0x9090 | |
| /* .text should occupy whole number of pages */ | |
| . = ALIGN(PAGE_SIZE); | |
| X86_ALIGN_RODATA_BEGIN | |
| RO_DATA(PAGE_SIZE) | |
| X86_ALIGN_RODATA_END | |
| /* Data */ | |
| .data : AT(ADDR(.data) - LOAD_OFFSET) { | |
| /* Start of data section */ | |
| _sdata = .; | |
| /* init_task */ | |
| INIT_TASK_DATA(THREAD_SIZE) | |
| #ifdef CONFIG_X86_32 | |
| /* 32 bit has nosave before _edata */ | |
| NOSAVE_DATA | |
| #endif | |
| PAGE_ALIGNED_DATA(PAGE_SIZE) | |
| CACHELINE_ALIGNED_DATA(L1_CACHE_BYTES) | |
| DATA_DATA | |
| CONSTRUCTORS | |
| /* rarely changed data like cpu maps */ | |
| READ_MOSTLY_DATA(INTERNODE_CACHE_BYTES) | |
| /* End of data section */ | |
| _edata = .; | |
| } :data | |
| BUG_TABLE | |
| ORC_UNWIND_TABLE | |
| . = ALIGN(PAGE_SIZE); | |
| __vvar_page = .; | |
| .vvar : AT(ADDR(.vvar) - LOAD_OFFSET) { | |
| /* work around gold bug 13023 */ | |
| __vvar_beginning_hack = .; | |
| /* Place all vvars at the offsets in asm/vvar.h. */ | |
| #define EMIT_VVAR(name, offset) \ | |
| . = __vvar_beginning_hack + offset; \ | |
| *(.vvar_ ## name) | |
| #define __VVAR_KERNEL_LDS | |
| #include <asm/vvar.h> | |
| #undef __VVAR_KERNEL_LDS | |
| #undef EMIT_VVAR | |
| /* | |
| * Pad the rest of the page with zeros. Otherwise the loader | |
| * can leave garbage here. | |
| */ | |
| . = __vvar_beginning_hack + PAGE_SIZE; | |
| } :data | |
| . = ALIGN(__vvar_page + PAGE_SIZE, PAGE_SIZE); | |
| /* Init code and data - will be freed after init */ | |
| . = ALIGN(PAGE_SIZE); | |
| .init.begin : AT(ADDR(.init.begin) - LOAD_OFFSET) { | |
| __init_begin = .; /* paired with __init_end */ | |
| } | |
| #if defined(CONFIG_X86_64) && defined(CONFIG_SMP) | |
| /* | |
| * percpu offsets are zero-based on SMP. PERCPU_VADDR() changes the | |
| * output PHDR, so the next output section - .init.text - should | |
| * start another segment - init. | |
| */ | |
| PERCPU_VADDR(INTERNODE_CACHE_BYTES, 0, :percpu) | |
| ASSERT(SIZEOF(.data..percpu) < CONFIG_PHYSICAL_START, | |
| "per-CPU data too large - increase CONFIG_PHYSICAL_START") | |
| #endif | |
| INIT_TEXT_SECTION(PAGE_SIZE) | |
| #ifdef CONFIG_X86_64 | |
| :init | |
| #endif | |
| /* | |
| * Section for code used exclusively before alternatives are run. All | |
| * references to such code must be patched out by alternatives, normally | |
| * by using X86_FEATURE_ALWAYS CPU feature bit. | |
| * | |
| * See static_cpu_has() for an example. | |
| */ | |
| .altinstr_aux : AT(ADDR(.altinstr_aux) - LOAD_OFFSET) { | |
| *(.altinstr_aux) | |
| } | |
| INIT_DATA_SECTION(16) | |
| .x86_cpu_dev.init : AT(ADDR(.x86_cpu_dev.init) - LOAD_OFFSET) { | |
| __x86_cpu_dev_start = .; | |
| *(.x86_cpu_dev.init) | |
| __x86_cpu_dev_end = .; | |
| } | |
| #ifdef CONFIG_X86_INTEL_MID | |
| .x86_intel_mid_dev.init : AT(ADDR(.x86_intel_mid_dev.init) - \ | |
| LOAD_OFFSET) { | |
| __x86_intel_mid_dev_start = .; | |
| *(.x86_intel_mid_dev.init) | |
| __x86_intel_mid_dev_end = .; | |
| } | |
| #endif | |
| /* | |
| * start address and size of operations which during runtime | |
| * can be patched with virtualization friendly instructions or | |
| * baremetal native ones. Think page table operations. | |
| * Details in paravirt_types.h | |
| */ | |
| . = ALIGN(8); | |
| .parainstructions : AT(ADDR(.parainstructions) - LOAD_OFFSET) { | |
| __parainstructions = .; | |
| *(.parainstructions) | |
| __parainstructions_end = .; | |
| } | |
| /* | |
| * struct alt_inst entries. From the header (alternative.h): | |
| * "Alternative instructions for different CPU types or capabilities" | |
| * Think locking instructions on spinlocks. | |
| */ | |
| . = ALIGN(8); | |
| .altinstructions : AT(ADDR(.altinstructions) - LOAD_OFFSET) { | |
| __alt_instructions = .; | |
| *(.altinstructions) | |
| __alt_instructions_end = .; | |
| } | |
| /* | |
| * And here are the replacement instructions. The linker sticks | |
| * them as binary blobs. The .altinstructions has enough data to | |
| * get the address and the length of them to patch the kernel safely. | |
| */ | |
| .altinstr_replacement : AT(ADDR(.altinstr_replacement) - LOAD_OFFSET) { | |
| *(.altinstr_replacement) | |
| } | |
| /* | |
| * struct iommu_table_entry entries are injected in this section. | |
| * It is an array of IOMMUs which during run time gets sorted depending | |
| * on its dependency order. After rootfs_initcall is complete | |
| * this section can be safely removed. | |
| */ | |
| .iommu_table : AT(ADDR(.iommu_table) - LOAD_OFFSET) { | |
| __iommu_table = .; | |
| *(.iommu_table) | |
| __iommu_table_end = .; | |
| } | |
| . = ALIGN(8); | |
| .apicdrivers : AT(ADDR(.apicdrivers) - LOAD_OFFSET) { | |
| __apicdrivers = .; | |
| *(.apicdrivers); | |
| __apicdrivers_end = .; | |
| } | |
| . = ALIGN(8); | |
| /* | |
| * .exit.text is discard at runtime, not link time, to deal with | |
| * references from .altinstructions and .eh_frame | |
| */ | |
| .exit.text : AT(ADDR(.exit.text) - LOAD_OFFSET) { | |
| EXIT_TEXT | |
| } | |
| .exit.data : AT(ADDR(.exit.data) - LOAD_OFFSET) { | |
| EXIT_DATA | |
| } | |
| #if !defined(CONFIG_X86_64) || !defined(CONFIG_SMP) | |
| PERCPU_SECTION(INTERNODE_CACHE_BYTES) | |
| #endif | |
| . = ALIGN(PAGE_SIZE); | |
| /* freed after init ends here */ | |
| .init.end : AT(ADDR(.init.end) - LOAD_OFFSET) { | |
| __init_end = .; | |
| } | |
| /* | |
| * smp_locks might be freed after init | |
| * start/end must be page aligned | |
| */ | |
| . = ALIGN(PAGE_SIZE); | |
| .smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) { | |
| __smp_locks = .; | |
| *(.smp_locks) | |
| . = ALIGN(PAGE_SIZE); | |
| __smp_locks_end = .; | |
| } | |
| #ifdef CONFIG_X86_64 | |
| .data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) { | |
| NOSAVE_DATA | |
| } | |
| #endif | |
| /* BSS */ | |
| . = ALIGN(PAGE_SIZE); | |
| .bss : AT(ADDR(.bss) - LOAD_OFFSET) { | |
| __bss_start = .; | |
| *(.bss..page_aligned) | |
| *(BSS_MAIN) | |
| BSS_DECRYPTED | |
| . = ALIGN(PAGE_SIZE); | |
| __bss_stop = .; | |
| } | |
| . = ALIGN(PAGE_SIZE); | |
| .brk : AT(ADDR(.brk) - LOAD_OFFSET) { | |
| __brk_base = .; | |
| . += 64 * 1024; /* 64k alignment slop space */ | |
| *(.brk_reservation) /* areas brk users have reserved */ | |
| __brk_limit = .; | |
| } | |
| . = ALIGN(PAGE_SIZE); /* keep VO_INIT_SIZE page aligned */ | |
| _end = .; | |
| STABS_DEBUG | |
| DWARF_DEBUG | |
| /* Sections to be discarded */ | |
| DISCARDS | |
| /DISCARD/ : { | |
| *(.eh_frame) | |
| } | |
| } | |
| #ifdef CONFIG_X86_32 | |
| /* | |
| * The ASSERT() sink to . is intentional, for binutils 2.14 compatibility: | |
| */ | |
| . = ASSERT((_end - LOAD_OFFSET <= KERNEL_IMAGE_SIZE), | |
| "kernel image bigger than KERNEL_IMAGE_SIZE"); | |
| #else | |
| /* | |
| * Per-cpu symbols which need to be offset from __per_cpu_load | |
| * for the boot processor. | |
| */ | |
| #define INIT_PER_CPU(x) init_per_cpu__##x = ABSOLUTE(x) + __per_cpu_load | |
| INIT_PER_CPU(gdt_page); | |
| INIT_PER_CPU(irq_stack_union); | |
| /* | |
| * Build-time check on the image size: | |
| */ | |
| . = ASSERT((_end - _text <= KERNEL_IMAGE_SIZE), | |
| "kernel image bigger than KERNEL_IMAGE_SIZE"); | |
| #ifdef CONFIG_SMP | |
| . = ASSERT((irq_stack_union == 0), | |
| "irq_stack_union is not at start of per-cpu area"); | |
| #endif | |
| #endif /* CONFIG_X86_32 */ | |
| #ifdef CONFIG_KEXEC_CORE | |
| #include <asm/kexec.h> | |
| . = ASSERT(kexec_control_code_size <= KEXEC_CONTROL_CODE_MAX_SIZE, | |
| "kexec control code size is too big"); | |
| #endif | |