| // SPDX-License-Identifier: GPL-2.0 | |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | |
| #include <linux/errno.h> | |
| #include <linux/kernel.h> | |
| #include <linux/mm.h> | |
| #include <linux/smp.h> | |
| #include <linux/prctl.h> | |
| #include <linux/slab.h> | |
| #include <linux/sched.h> | |
| #include <linux/sched/idle.h> | |
| #include <linux/sched/debug.h> | |
| #include <linux/sched/task.h> | |
| #include <linux/sched/task_stack.h> | |
| #include <linux/init.h> | |
| #include <linux/export.h> | |
| #include <linux/pm.h> | |
| #include <linux/tick.h> | |
| #include <linux/random.h> | |
| #include <linux/user-return-notifier.h> | |
| #include <linux/dmi.h> | |
| #include <linux/utsname.h> | |
| #include <linux/stackprotector.h> | |
| #include <linux/cpuidle.h> | |
| #include <trace/events/power.h> | |
| #include <linux/hw_breakpoint.h> | |
| #include <asm/cpu.h> | |
| #include <asm/apic.h> | |
| #include <asm/syscalls.h> | |
| #include <linux/uaccess.h> | |
| #include <asm/mwait.h> | |
| #include <asm/fpu/internal.h> | |
| #include <asm/debugreg.h> | |
| #include <asm/nmi.h> | |
| #include <asm/tlbflush.h> | |
| #include <asm/mce.h> | |
| #include <asm/vm86.h> | |
| #include <asm/switch_to.h> | |
| #include <asm/desc.h> | |
| #include <asm/prctl.h> | |
| #include <asm/spec-ctrl.h> | |
| #include "process.h" | |
| /* | |
| * per-CPU TSS segments. Threads are completely 'soft' on Linux, | |
| * no more per-task TSS's. The TSS size is kept cacheline-aligned | |
| * so they are allowed to end up in the .data..cacheline_aligned | |
| * section. Since TSS's are completely CPU-local, we want them | |
| * on exact cacheline boundaries, to eliminate cacheline ping-pong. | |
| */ | |
| __visible DEFINE_PER_CPU_PAGE_ALIGNED(struct tss_struct, cpu_tss_rw) = { | |
| .x86_tss = { | |
| /* | |
| * .sp0 is only used when entering ring 0 from a lower | |
| * privilege level. Since the init task never runs anything | |
| * but ring 0 code, there is no need for a valid value here. | |
| * Poison it. | |
| */ | |
| .sp0 = (1UL << (BITS_PER_LONG-1)) + 1, | |
| /* | |
| * .sp1 is cpu_current_top_of_stack. The init task never | |
| * runs user code, but cpu_current_top_of_stack should still | |
| * be well defined before the first context switch. | |
| */ | |
| .sp1 = TOP_OF_INIT_STACK, | |
| #ifdef CONFIG_X86_32 | |
| .ss0 = __KERNEL_DS, | |
| .ss1 = __KERNEL_CS, | |
| .io_bitmap_base = INVALID_IO_BITMAP_OFFSET, | |
| #endif | |
| }, | |
| #ifdef CONFIG_X86_32 | |
| /* | |
| * Note that the .io_bitmap member must be extra-big. This is because | |
| * the CPU will access an additional byte beyond the end of the IO | |
| * permission bitmap. The extra byte must be all 1 bits, and must | |
| * be within the limit. | |
| */ | |
| .io_bitmap = { [0 ... IO_BITMAP_LONGS] = ~0 }, | |
| #endif | |
| }; | |
| EXPORT_PER_CPU_SYMBOL(cpu_tss_rw); | |
| DEFINE_PER_CPU(bool, __tss_limit_invalid); | |
| EXPORT_PER_CPU_SYMBOL_GPL(__tss_limit_invalid); | |
| /* | |
| * this gets called so that we can store lazy state into memory and copy the | |
| * current task into the new thread. | |
| */ | |
| int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src) | |
| { | |
| memcpy(dst, src, arch_task_struct_size); | |
| #ifdef CONFIG_VM86 | |
| dst->thread.vm86 = NULL; | |
| #endif | |
| return fpu__copy(&dst->thread.fpu, &src->thread.fpu); | |
| } | |
| /* | |
| * Free current thread data structures etc.. | |
| */ | |
| void exit_thread(struct task_struct *tsk) | |
| { | |
| struct thread_struct *t = &tsk->thread; | |
| unsigned long *bp = t->io_bitmap_ptr; | |
| struct fpu *fpu = &t->fpu; | |
| if (bp) { | |
| struct tss_struct *tss = &per_cpu(cpu_tss_rw, get_cpu()); | |
| t->io_bitmap_ptr = NULL; | |
| clear_thread_flag(TIF_IO_BITMAP); | |
| /* | |
| * Careful, clear this in the TSS too: | |
| */ | |
| memset(tss->io_bitmap, 0xff, t->io_bitmap_max); | |
| t->io_bitmap_max = 0; | |
| put_cpu(); | |
| kfree(bp); | |
| } | |
| free_vm86(t); | |
| fpu__drop(fpu); | |
| } | |
| void flush_thread(void) | |
| { | |
| struct task_struct *tsk = current; | |
| flush_ptrace_hw_breakpoint(tsk); | |
| memset(tsk->thread.tls_array, 0, sizeof(tsk->thread.tls_array)); | |
| fpu__clear(&tsk->thread.fpu); | |
| } | |
| void disable_TSC(void) | |
| { | |
| preempt_disable(); | |
| if (!test_and_set_thread_flag(TIF_NOTSC)) | |
| /* | |
| * Must flip the CPU state synchronously with | |
| * TIF_NOTSC in the current running context. | |
| */ | |
| cr4_set_bits(X86_CR4_TSD); | |
| preempt_enable(); | |
| } | |
| static void enable_TSC(void) | |
| { | |
| preempt_disable(); | |
| if (test_and_clear_thread_flag(TIF_NOTSC)) | |
| /* | |
| * Must flip the CPU state synchronously with | |
| * TIF_NOTSC in the current running context. | |
| */ | |
| cr4_clear_bits(X86_CR4_TSD); | |
| preempt_enable(); | |
| } | |
| int get_tsc_mode(unsigned long adr) | |
| { | |
| unsigned int val; | |
| if (test_thread_flag(TIF_NOTSC)) | |
| val = PR_TSC_SIGSEGV; | |
| else | |
| val = PR_TSC_ENABLE; | |
| return put_user(val, (unsigned int __user *)adr); | |
| } | |
| int set_tsc_mode(unsigned int val) | |
| { | |
| if (val == PR_TSC_SIGSEGV) | |
| disable_TSC(); | |
| else if (val == PR_TSC_ENABLE) | |
| enable_TSC(); | |
| else | |
| return -EINVAL; | |
| return 0; | |
| } | |
| DEFINE_PER_CPU(u64, msr_misc_features_shadow); | |
| static void set_cpuid_faulting(bool on) | |
| { | |
| u64 msrval; | |
| msrval = this_cpu_read(msr_misc_features_shadow); | |
| msrval &= ~MSR_MISC_FEATURES_ENABLES_CPUID_FAULT; | |
| msrval |= (on << MSR_MISC_FEATURES_ENABLES_CPUID_FAULT_BIT); | |
| this_cpu_write(msr_misc_features_shadow, msrval); | |
| wrmsrl(MSR_MISC_FEATURES_ENABLES, msrval); | |
| } | |
| static void disable_cpuid(void) | |
| { | |
| preempt_disable(); | |
| if (!test_and_set_thread_flag(TIF_NOCPUID)) { | |
| /* | |
| * Must flip the CPU state synchronously with | |
| * TIF_NOCPUID in the current running context. | |
| */ | |
| set_cpuid_faulting(true); | |
| } | |
| preempt_enable(); | |
| } | |
| static void enable_cpuid(void) | |
| { | |
| preempt_disable(); | |
| if (test_and_clear_thread_flag(TIF_NOCPUID)) { | |
| /* | |
| * Must flip the CPU state synchronously with | |
| * TIF_NOCPUID in the current running context. | |
| */ | |
| set_cpuid_faulting(false); | |
| } | |
| preempt_enable(); | |
| } | |
| static int get_cpuid_mode(void) | |
| { | |
| return !test_thread_flag(TIF_NOCPUID); | |
| } | |
| static int set_cpuid_mode(struct task_struct *task, unsigned long cpuid_enabled) | |
| { | |
| if (!static_cpu_has(X86_FEATURE_CPUID_FAULT)) | |
| return -ENODEV; | |
| if (cpuid_enabled) | |
| enable_cpuid(); | |
| else | |
| disable_cpuid(); | |
| return 0; | |
| } | |
| /* | |
| * Called immediately after a successful exec. | |
| */ | |
| void arch_setup_new_exec(void) | |
| { | |
| /* If cpuid was previously disabled for this task, re-enable it. */ | |
| if (test_thread_flag(TIF_NOCPUID)) | |
| enable_cpuid(); | |
| } | |
| static inline void switch_to_bitmap(struct thread_struct *prev, | |
| struct thread_struct *next, | |
| unsigned long tifp, unsigned long tifn) | |
| { | |
| struct tss_struct *tss = this_cpu_ptr(&cpu_tss_rw); | |
| if (tifn & _TIF_IO_BITMAP) { | |
| /* | |
| * Copy the relevant range of the IO bitmap. | |
| * Normally this is 128 bytes or less: | |
| */ | |
| memcpy(tss->io_bitmap, next->io_bitmap_ptr, | |
| max(prev->io_bitmap_max, next->io_bitmap_max)); | |
| /* | |
| * Make sure that the TSS limit is correct for the CPU | |
| * to notice the IO bitmap. | |
| */ | |
| refresh_tss_limit(); | |
| } else if (tifp & _TIF_IO_BITMAP) { | |
| /* | |
| * Clear any possible leftover bits: | |
| */ | |
| memset(tss->io_bitmap, 0xff, prev->io_bitmap_max); | |
| } | |
| } | |
| #ifdef CONFIG_SMP | |
| struct ssb_state { | |
| struct ssb_state *shared_state; | |
| raw_spinlock_t lock; | |
| unsigned int disable_state; | |
| unsigned long local_state; | |
| }; | |
| #define LSTATE_SSB 0 | |
| static DEFINE_PER_CPU(struct ssb_state, ssb_state); | |
| void speculative_store_bypass_ht_init(void) | |
| { | |
| struct ssb_state *st = this_cpu_ptr(&ssb_state); | |
| unsigned int this_cpu = smp_processor_id(); | |
| unsigned int cpu; | |
| st->local_state = 0; | |
| /* | |
| * Shared state setup happens once on the first bringup | |
| * of the CPU. It's not destroyed on CPU hotunplug. | |
| */ | |
| if (st->shared_state) | |
| return; | |
| raw_spin_lock_init(&st->lock); | |
| /* | |
| * Go over HT siblings and check whether one of them has set up the | |
| * shared state pointer already. | |
| */ | |
| for_each_cpu(cpu, topology_sibling_cpumask(this_cpu)) { | |
| if (cpu == this_cpu) | |
| continue; | |
| if (!per_cpu(ssb_state, cpu).shared_state) | |
| continue; | |
| /* Link it to the state of the sibling: */ | |
| st->shared_state = per_cpu(ssb_state, cpu).shared_state; | |
| return; | |
| } | |
| /* | |
| * First HT sibling to come up on the core. Link shared state of | |
| * the first HT sibling to itself. The siblings on the same core | |
| * which come up later will see the shared state pointer and link | |
| * themself to the state of this CPU. | |
| */ | |
| st->shared_state = st; | |
| } | |
| /* | |
| * Logic is: First HT sibling enables SSBD for both siblings in the core | |
| * and last sibling to disable it, disables it for the whole core. This how | |
| * MSR_SPEC_CTRL works in "hardware": | |
| * | |
| * CORE_SPEC_CTRL = THREAD0_SPEC_CTRL | THREAD1_SPEC_CTRL | |
| */ | |
| static __always_inline void amd_set_core_ssb_state(unsigned long tifn) | |
| { | |
| struct ssb_state *st = this_cpu_ptr(&ssb_state); | |
| u64 msr = x86_amd_ls_cfg_base; | |
| if (!static_cpu_has(X86_FEATURE_ZEN)) { | |
| msr |= ssbd_tif_to_amd_ls_cfg(tifn); | |
| wrmsrl(MSR_AMD64_LS_CFG, msr); | |
| return; | |
| } | |
| if (tifn & _TIF_SSBD) { | |
| /* | |
| * Since this can race with prctl(), block reentry on the | |
| * same CPU. | |
| */ | |
| if (__test_and_set_bit(LSTATE_SSB, &st->local_state)) | |
| return; | |
| msr |= x86_amd_ls_cfg_ssbd_mask; | |
| raw_spin_lock(&st->shared_state->lock); | |
| /* First sibling enables SSBD: */ | |
| if (!st->shared_state->disable_state) | |
| wrmsrl(MSR_AMD64_LS_CFG, msr); | |
| st->shared_state->disable_state++; | |
| raw_spin_unlock(&st->shared_state->lock); | |
| } else { | |
| if (!__test_and_clear_bit(LSTATE_SSB, &st->local_state)) | |
| return; | |
| raw_spin_lock(&st->shared_state->lock); | |
| st->shared_state->disable_state--; | |
| if (!st->shared_state->disable_state) | |
| wrmsrl(MSR_AMD64_LS_CFG, msr); | |
| raw_spin_unlock(&st->shared_state->lock); | |
| } | |
| } | |
| #else | |
| static __always_inline void amd_set_core_ssb_state(unsigned long tifn) | |
| { | |
| u64 msr = x86_amd_ls_cfg_base | ssbd_tif_to_amd_ls_cfg(tifn); | |
| wrmsrl(MSR_AMD64_LS_CFG, msr); | |
| } | |
| #endif | |
| static __always_inline void amd_set_ssb_virt_state(unsigned long tifn) | |
| { | |
| /* | |
| * SSBD has the same definition in SPEC_CTRL and VIRT_SPEC_CTRL, | |
| * so ssbd_tif_to_spec_ctrl() just works. | |
| */ | |
| wrmsrl(MSR_AMD64_VIRT_SPEC_CTRL, ssbd_tif_to_spec_ctrl(tifn)); | |
| } | |
| /* | |
| * Update the MSRs managing speculation control, during context switch. | |
| * | |
| * tifp: Previous task's thread flags | |
| * tifn: Next task's thread flags | |
| */ | |
| static __always_inline void __speculation_ctrl_update(unsigned long tifp, | |
| unsigned long tifn) | |
| { | |
| unsigned long tif_diff = tifp ^ tifn; | |
| u64 msr = x86_spec_ctrl_base; | |
| bool updmsr = false; | |
| lockdep_assert_irqs_disabled(); | |
| /* | |
| * If TIF_SSBD is different, select the proper mitigation | |
| * method. Note that if SSBD mitigation is disabled or permanentely | |
| * enabled this branch can't be taken because nothing can set | |
| * TIF_SSBD. | |
| */ | |
| if (tif_diff & _TIF_SSBD) { | |
| if (static_cpu_has(X86_FEATURE_VIRT_SSBD)) { | |
| amd_set_ssb_virt_state(tifn); | |
| } else if (static_cpu_has(X86_FEATURE_LS_CFG_SSBD)) { | |
| amd_set_core_ssb_state(tifn); | |
| } else if (static_cpu_has(X86_FEATURE_SPEC_CTRL_SSBD) || | |
| static_cpu_has(X86_FEATURE_AMD_SSBD)) { | |
| msr |= ssbd_tif_to_spec_ctrl(tifn); | |
| updmsr = true; | |
| } | |
| } | |
| /* | |
| * Only evaluate TIF_SPEC_IB if conditional STIBP is enabled, | |
| * otherwise avoid the MSR write. | |
| */ | |
| if (IS_ENABLED(CONFIG_SMP) && | |
| static_branch_unlikely(&switch_to_cond_stibp)) { | |
| updmsr |= !!(tif_diff & _TIF_SPEC_IB); | |
| msr |= stibp_tif_to_spec_ctrl(tifn); | |
| } | |
| if (updmsr) | |
| wrmsrl(MSR_IA32_SPEC_CTRL, msr); | |
| } | |
| static unsigned long speculation_ctrl_update_tif(struct task_struct *tsk) | |
| { | |
| if (test_and_clear_tsk_thread_flag(tsk, TIF_SPEC_FORCE_UPDATE)) { | |
| if (task_spec_ssb_disable(tsk)) | |
| set_tsk_thread_flag(tsk, TIF_SSBD); | |
| else | |
| clear_tsk_thread_flag(tsk, TIF_SSBD); | |
| if (task_spec_ib_disable(tsk)) | |
| set_tsk_thread_flag(tsk, TIF_SPEC_IB); | |
| else | |
| clear_tsk_thread_flag(tsk, TIF_SPEC_IB); | |
| } | |
| /* Return the updated threadinfo flags*/ | |
| return task_thread_info(tsk)->flags; | |
| } | |
| void speculation_ctrl_update(unsigned long tif) | |
| { | |
| unsigned long flags; | |
| /* Forced update. Make sure all relevant TIF flags are different */ | |
| local_irq_save(flags); | |
| __speculation_ctrl_update(~tif, tif); | |
| local_irq_restore(flags); | |
| } | |
| /* Called from seccomp/prctl update */ | |
| void speculation_ctrl_update_current(void) | |
| { | |
| preempt_disable(); | |
| speculation_ctrl_update(speculation_ctrl_update_tif(current)); | |
| preempt_enable(); | |
| } | |
| void __switch_to_xtra(struct task_struct *prev_p, struct task_struct *next_p) | |
| { | |
| struct thread_struct *prev, *next; | |
| unsigned long tifp, tifn; | |
| prev = &prev_p->thread; | |
| next = &next_p->thread; | |
| tifn = READ_ONCE(task_thread_info(next_p)->flags); | |
| tifp = READ_ONCE(task_thread_info(prev_p)->flags); | |
| switch_to_bitmap(prev, next, tifp, tifn); | |
| propagate_user_return_notify(prev_p, next_p); | |
| if ((tifp & _TIF_BLOCKSTEP || tifn & _TIF_BLOCKSTEP) && | |
| arch_has_block_step()) { | |
| unsigned long debugctl, msk; | |
| rdmsrl(MSR_IA32_DEBUGCTLMSR, debugctl); | |
| debugctl &= ~DEBUGCTLMSR_BTF; | |
| msk = tifn & _TIF_BLOCKSTEP; | |
| debugctl |= (msk >> TIF_BLOCKSTEP) << DEBUGCTLMSR_BTF_SHIFT; | |
| wrmsrl(MSR_IA32_DEBUGCTLMSR, debugctl); | |
| } | |
| if ((tifp ^ tifn) & _TIF_NOTSC) | |
| cr4_toggle_bits_irqsoff(X86_CR4_TSD); | |
| if ((tifp ^ tifn) & _TIF_NOCPUID) | |
| set_cpuid_faulting(!!(tifn & _TIF_NOCPUID)); | |
| if (likely(!((tifp | tifn) & _TIF_SPEC_FORCE_UPDATE))) { | |
| __speculation_ctrl_update(tifp, tifn); | |
| } else { | |
| speculation_ctrl_update_tif(prev_p); | |
| tifn = speculation_ctrl_update_tif(next_p); | |
| /* Enforce MSR update to ensure consistent state */ | |
| __speculation_ctrl_update(~tifn, tifn); | |
| } | |
| } | |
| /* | |
| * Idle related variables and functions | |
| */ | |
| unsigned long boot_option_idle_override = IDLE_NO_OVERRIDE; | |
| EXPORT_SYMBOL(boot_option_idle_override); | |
| static void (*x86_idle)(void); | |
| #ifndef CONFIG_SMP | |
| static inline void play_dead(void) | |
| { | |
| BUG(); | |
| } | |
| #endif | |
| void arch_cpu_idle_enter(void) | |
| { | |
| tsc_verify_tsc_adjust(false); | |
| local_touch_nmi(); | |
| } | |
| void arch_cpu_idle_dead(void) | |
| { | |
| play_dead(); | |
| } | |
| /* | |
| * Called from the generic idle code. | |
| */ | |
| void arch_cpu_idle(void) | |
| { | |
| x86_idle(); | |
| } | |
| /* | |
| * We use this if we don't have any better idle routine.. | |
| */ | |
| void __cpuidle default_idle(void) | |
| { | |
| trace_cpu_idle_rcuidle(1, smp_processor_id()); | |
| safe_halt(); | |
| trace_cpu_idle_rcuidle(PWR_EVENT_EXIT, smp_processor_id()); | |
| } | |
| #ifdef CONFIG_APM_MODULE | |
| EXPORT_SYMBOL(default_idle); | |
| #endif | |
| #ifdef CONFIG_XEN | |
| bool xen_set_default_idle(void) | |
| { | |
| bool ret = !!x86_idle; | |
| x86_idle = default_idle; | |
| return ret; | |
| } | |
| #endif | |
| void stop_this_cpu(void *dummy) | |
| { | |
| local_irq_disable(); | |
| /* | |
| * Remove this CPU: | |
| */ | |
| set_cpu_online(smp_processor_id(), false); | |
| disable_local_APIC(); | |
| mcheck_cpu_clear(this_cpu_ptr(&cpu_info)); | |
| /* | |
| * Use wbinvd on processors that support SME. This provides support | |
| * for performing a successful kexec when going from SME inactive | |
| * to SME active (or vice-versa). The cache must be cleared so that | |
| * if there are entries with the same physical address, both with and | |
| * without the encryption bit, they don't race each other when flushed | |
| * and potentially end up with the wrong entry being committed to | |
| * memory. | |
| */ | |
| if (boot_cpu_has(X86_FEATURE_SME)) | |
| native_wbinvd(); | |
| for (;;) { | |
| /* | |
| * Use native_halt() so that memory contents don't change | |
| * (stack usage and variables) after possibly issuing the | |
| * native_wbinvd() above. | |
| */ | |
| native_halt(); | |
| } | |
| } | |
| /* | |
| * AMD Erratum 400 aware idle routine. We handle it the same way as C3 power | |
| * states (local apic timer and TSC stop). | |
| */ | |
| static void amd_e400_idle(void) | |
| { | |
| /* | |
| * We cannot use static_cpu_has_bug() here because X86_BUG_AMD_APIC_C1E | |
| * gets set after static_cpu_has() places have been converted via | |
| * alternatives. | |
| */ | |
| if (!boot_cpu_has_bug(X86_BUG_AMD_APIC_C1E)) { | |
| default_idle(); | |
| return; | |
| } | |
| tick_broadcast_enter(); | |
| default_idle(); | |
| /* | |
| * The switch back from broadcast mode needs to be called with | |
| * interrupts disabled. | |
| */ | |
| local_irq_disable(); | |
| tick_broadcast_exit(); | |
| local_irq_enable(); | |
| } | |
| /* | |
| * Intel Core2 and older machines prefer MWAIT over HALT for C1. | |
| * We can't rely on cpuidle installing MWAIT, because it will not load | |
| * on systems that support only C1 -- so the boot default must be MWAIT. | |
| * | |
| * Some AMD machines are the opposite, they depend on using HALT. | |
| * | |
| * So for default C1, which is used during boot until cpuidle loads, | |
| * use MWAIT-C1 on Intel HW that has it, else use HALT. | |
| */ | |
| static int prefer_mwait_c1_over_halt(const struct cpuinfo_x86 *c) | |
| { | |
| if (c->x86_vendor != X86_VENDOR_INTEL) | |
| return 0; | |
| if (!cpu_has(c, X86_FEATURE_MWAIT) || static_cpu_has_bug(X86_BUG_MONITOR)) | |
| return 0; | |
| return 1; | |
| } | |
| /* | |
| * MONITOR/MWAIT with no hints, used for default C1 state. This invokes MWAIT | |
| * with interrupts enabled and no flags, which is backwards compatible with the | |
| * original MWAIT implementation. | |
| */ | |
| static __cpuidle void mwait_idle(void) | |
| { | |
| if (!current_set_polling_and_test()) { | |
| trace_cpu_idle_rcuidle(1, smp_processor_id()); | |
| if (this_cpu_has(X86_BUG_CLFLUSH_MONITOR)) { | |
| mb(); /* quirk */ | |
| clflush((void *)¤t_thread_info()->flags); | |
| mb(); /* quirk */ | |
| } | |
| __monitor((void *)¤t_thread_info()->flags, 0, 0); | |
| if (!need_resched()) | |
| __sti_mwait(0, 0); | |
| else | |
| local_irq_enable(); | |
| trace_cpu_idle_rcuidle(PWR_EVENT_EXIT, smp_processor_id()); | |
| } else { | |
| local_irq_enable(); | |
| } | |
| __current_clr_polling(); | |
| } | |
| void select_idle_routine(const struct cpuinfo_x86 *c) | |
| { | |
| #ifdef CONFIG_SMP | |
| if (boot_option_idle_override == IDLE_POLL && smp_num_siblings > 1) | |
| pr_warn_once("WARNING: polling idle and HT enabled, performance may degrade\n"); | |
| #endif | |
| if (x86_idle || boot_option_idle_override == IDLE_POLL) | |
| return; | |
| if (boot_cpu_has_bug(X86_BUG_AMD_E400)) { | |
| pr_info("using AMD E400 aware idle routine\n"); | |
| x86_idle = amd_e400_idle; | |
| } else if (prefer_mwait_c1_over_halt(c)) { | |
| pr_info("using mwait in idle threads\n"); | |
| x86_idle = mwait_idle; | |
| } else | |
| x86_idle = default_idle; | |
| } | |
| void amd_e400_c1e_apic_setup(void) | |
| { | |
| if (boot_cpu_has_bug(X86_BUG_AMD_APIC_C1E)) { | |
| pr_info("Switch to broadcast mode on CPU%d\n", smp_processor_id()); | |
| local_irq_disable(); | |
| tick_broadcast_force(); | |
| local_irq_enable(); | |
| } | |
| } | |
| void __init arch_post_acpi_subsys_init(void) | |
| { | |
| u32 lo, hi; | |
| if (!boot_cpu_has_bug(X86_BUG_AMD_E400)) | |
| return; | |
| /* | |
| * AMD E400 detection needs to happen after ACPI has been enabled. If | |
| * the machine is affected K8_INTP_C1E_ACTIVE_MASK bits are set in | |
| * MSR_K8_INT_PENDING_MSG. | |
| */ | |
| rdmsr(MSR_K8_INT_PENDING_MSG, lo, hi); | |
| if (!(lo & K8_INTP_C1E_ACTIVE_MASK)) | |
| return; | |
| boot_cpu_set_bug(X86_BUG_AMD_APIC_C1E); | |
| if (!boot_cpu_has(X86_FEATURE_NONSTOP_TSC)) | |
| mark_tsc_unstable("TSC halt in AMD C1E"); | |
| pr_info("System has AMD C1E enabled\n"); | |
| } | |
| static int __init idle_setup(char *str) | |
| { | |
| if (!str) | |
| return -EINVAL; | |
| if (!strcmp(str, "poll")) { | |
| pr_info("using polling idle threads\n"); | |
| boot_option_idle_override = IDLE_POLL; | |
| cpu_idle_poll_ctrl(true); | |
| } else if (!strcmp(str, "halt")) { | |
| /* | |
| * When the boot option of idle=halt is added, halt is | |
| * forced to be used for CPU idle. In such case CPU C2/C3 | |
| * won't be used again. | |
| * To continue to load the CPU idle driver, don't touch | |
| * the boot_option_idle_override. | |
| */ | |
| x86_idle = default_idle; | |
| boot_option_idle_override = IDLE_HALT; | |
| } else if (!strcmp(str, "nomwait")) { | |
| /* | |
| * If the boot option of "idle=nomwait" is added, | |
| * it means that mwait will be disabled for CPU C2/C3 | |
| * states. In such case it won't touch the variable | |
| * of boot_option_idle_override. | |
| */ | |
| boot_option_idle_override = IDLE_NOMWAIT; | |
| } else | |
| return -1; | |
| return 0; | |
| } | |
| early_param("idle", idle_setup); | |
| unsigned long arch_align_stack(unsigned long sp) | |
| { | |
| if (!(current->personality & ADDR_NO_RANDOMIZE) && randomize_va_space) | |
| sp -= get_random_int() % 8192; | |
| return sp & ~0xf; | |
| } | |
| unsigned long arch_randomize_brk(struct mm_struct *mm) | |
| { | |
| return randomize_page(mm->brk, 0x02000000); | |
| } | |
| /* | |
| * Called from fs/proc with a reference on @p to find the function | |
| * which called into schedule(). This needs to be done carefully | |
| * because the task might wake up and we might look at a stack | |
| * changing under us. | |
| */ | |
| unsigned long get_wchan(struct task_struct *p) | |
| { | |
| unsigned long start, bottom, top, sp, fp, ip, ret = 0; | |
| int count = 0; | |
| if (!p || p == current || p->state == TASK_RUNNING) | |
| return 0; | |
| if (!try_get_task_stack(p)) | |
| return 0; | |
| start = (unsigned long)task_stack_page(p); | |
| if (!start) | |
| goto out; | |
| /* | |
| * Layout of the stack page: | |
| * | |
| * ----------- topmax = start + THREAD_SIZE - sizeof(unsigned long) | |
| * PADDING | |
| * ----------- top = topmax - TOP_OF_KERNEL_STACK_PADDING | |
| * stack | |
| * ----------- bottom = start | |
| * | |
| * The tasks stack pointer points at the location where the | |
| * framepointer is stored. The data on the stack is: | |
| * ... IP FP ... IP FP | |
| * | |
| * We need to read FP and IP, so we need to adjust the upper | |
| * bound by another unsigned long. | |
| */ | |
| top = start + THREAD_SIZE - TOP_OF_KERNEL_STACK_PADDING; | |
| top -= 2 * sizeof(unsigned long); | |
| bottom = start; | |
| sp = READ_ONCE(p->thread.sp); | |
| if (sp < bottom || sp > top) | |
| goto out; | |
| fp = READ_ONCE_NOCHECK(((struct inactive_task_frame *)sp)->bp); | |
| do { | |
| if (fp < bottom || fp > top) | |
| goto out; | |
| ip = READ_ONCE_NOCHECK(*(unsigned long *)(fp + sizeof(unsigned long))); | |
| if (!in_sched_functions(ip)) { | |
| ret = ip; | |
| goto out; | |
| } | |
| fp = READ_ONCE_NOCHECK(*(unsigned long *)fp); | |
| } while (count++ < 16 && p->state != TASK_RUNNING); | |
| out: | |
| put_task_stack(p); | |
| return ret; | |
| } | |
| long do_arch_prctl_common(struct task_struct *task, int option, | |
| unsigned long cpuid_enabled) | |
| { | |
| switch (option) { | |
| case ARCH_GET_CPUID: | |
| return get_cpuid_mode(); | |
| case ARCH_SET_CPUID: | |
| return set_cpuid_mode(task, cpuid_enabled); | |
| } | |
| return -EINVAL; | |
| } |