| /* | |
| * Interrupt descriptor table related code | |
| * | |
| * This file is licensed under the GPL V2 | |
| */ | |
| #include <linux/interrupt.h> | |
| #include <asm/traps.h> | |
| #include <asm/proto.h> | |
| #include <asm/desc.h> | |
| #include <asm/hw_irq.h> | |
| struct idt_data { | |
| unsigned int vector; | |
| unsigned int segment; | |
| struct idt_bits bits; | |
| const void *addr; | |
| }; | |
| #define DPL0 0x0 | |
| #define DPL3 0x3 | |
| #define DEFAULT_STACK 0 | |
| #define G(_vector, _addr, _ist, _type, _dpl, _segment) \ | |
| { \ | |
| .vector = _vector, \ | |
| .bits.ist = _ist, \ | |
| .bits.type = _type, \ | |
| .bits.dpl = _dpl, \ | |
| .bits.p = 1, \ | |
| .addr = _addr, \ | |
| .segment = _segment, \ | |
| } | |
| /* Interrupt gate */ | |
| #define INTG(_vector, _addr) \ | |
| G(_vector, _addr, DEFAULT_STACK, GATE_INTERRUPT, DPL0, __KERNEL_CS) | |
| /* System interrupt gate */ | |
| #define SYSG(_vector, _addr) \ | |
| G(_vector, _addr, DEFAULT_STACK, GATE_INTERRUPT, DPL3, __KERNEL_CS) | |
| /* Interrupt gate with interrupt stack */ | |
| #define ISTG(_vector, _addr, _ist) \ | |
| G(_vector, _addr, _ist, GATE_INTERRUPT, DPL0, __KERNEL_CS) | |
| /* System interrupt gate with interrupt stack */ | |
| #define SISTG(_vector, _addr, _ist) \ | |
| G(_vector, _addr, _ist, GATE_INTERRUPT, DPL3, __KERNEL_CS) | |
| /* Task gate */ | |
| #define TSKG(_vector, _gdt) \ | |
| G(_vector, NULL, DEFAULT_STACK, GATE_TASK, DPL0, _gdt << 3) | |
| /* | |
| * Early traps running on the DEFAULT_STACK because the other interrupt | |
| * stacks work only after cpu_init(). | |
| */ | |
| static const __initconst struct idt_data early_idts[] = { | |
| INTG(X86_TRAP_DB, debug), | |
| SYSG(X86_TRAP_BP, int3), | |
| #ifdef CONFIG_X86_32 | |
| INTG(X86_TRAP_PF, page_fault), | |
| #endif | |
| }; | |
| /* | |
| * The default IDT entries which are set up in trap_init() before | |
| * cpu_init() is invoked. Interrupt stacks cannot be used at that point and | |
| * the traps which use them are reinitialized with IST after cpu_init() has | |
| * set up TSS. | |
| */ | |
| static const __initconst struct idt_data def_idts[] = { | |
| INTG(X86_TRAP_DE, divide_error), | |
| INTG(X86_TRAP_NMI, nmi), | |
| INTG(X86_TRAP_BR, bounds), | |
| INTG(X86_TRAP_UD, invalid_op), | |
| INTG(X86_TRAP_NM, device_not_available), | |
| INTG(X86_TRAP_OLD_MF, coprocessor_segment_overrun), | |
| INTG(X86_TRAP_TS, invalid_TSS), | |
| INTG(X86_TRAP_NP, segment_not_present), | |
| INTG(X86_TRAP_SS, stack_segment), | |
| INTG(X86_TRAP_GP, general_protection), | |
| INTG(X86_TRAP_SPURIOUS, spurious_interrupt_bug), | |
| INTG(X86_TRAP_MF, coprocessor_error), | |
| INTG(X86_TRAP_AC, alignment_check), | |
| INTG(X86_TRAP_XF, simd_coprocessor_error), | |
| #ifdef CONFIG_X86_32 | |
| TSKG(X86_TRAP_DF, GDT_ENTRY_DOUBLEFAULT_TSS), | |
| #else | |
| INTG(X86_TRAP_DF, double_fault), | |
| #endif | |
| INTG(X86_TRAP_DB, debug), | |
| #ifdef CONFIG_X86_MCE | |
| INTG(X86_TRAP_MC, &machine_check), | |
| #endif | |
| SYSG(X86_TRAP_OF, overflow), | |
| #if defined(CONFIG_IA32_EMULATION) | |
| SYSG(IA32_SYSCALL_VECTOR, entry_INT80_compat), | |
| #elif defined(CONFIG_X86_32) | |
| SYSG(IA32_SYSCALL_VECTOR, entry_INT80_32), | |
| #endif | |
| }; | |
| /* | |
| * The APIC and SMP idt entries | |
| */ | |
| static const __initconst struct idt_data apic_idts[] = { | |
| #ifdef CONFIG_SMP | |
| INTG(RESCHEDULE_VECTOR, reschedule_interrupt), | |
| INTG(CALL_FUNCTION_VECTOR, call_function_interrupt), | |
| INTG(CALL_FUNCTION_SINGLE_VECTOR, call_function_single_interrupt), | |
| INTG(IRQ_MOVE_CLEANUP_VECTOR, irq_move_cleanup_interrupt), | |
| INTG(REBOOT_VECTOR, reboot_interrupt), | |
| #endif | |
| #ifdef CONFIG_X86_THERMAL_VECTOR | |
| INTG(THERMAL_APIC_VECTOR, thermal_interrupt), | |
| #endif | |
| #ifdef CONFIG_X86_MCE_THRESHOLD | |
| INTG(THRESHOLD_APIC_VECTOR, threshold_interrupt), | |
| #endif | |
| #ifdef CONFIG_X86_MCE_AMD | |
| INTG(DEFERRED_ERROR_VECTOR, deferred_error_interrupt), | |
| #endif | |
| #ifdef CONFIG_X86_LOCAL_APIC | |
| INTG(LOCAL_TIMER_VECTOR, apic_timer_interrupt), | |
| INTG(X86_PLATFORM_IPI_VECTOR, x86_platform_ipi), | |
| # ifdef CONFIG_HAVE_KVM | |
| INTG(POSTED_INTR_VECTOR, kvm_posted_intr_ipi), | |
| INTG(POSTED_INTR_WAKEUP_VECTOR, kvm_posted_intr_wakeup_ipi), | |
| INTG(POSTED_INTR_NESTED_VECTOR, kvm_posted_intr_nested_ipi), | |
| # endif | |
| # ifdef CONFIG_IRQ_WORK | |
| INTG(IRQ_WORK_VECTOR, irq_work_interrupt), | |
| # endif | |
| #ifdef CONFIG_X86_UV | |
| INTG(UV_BAU_MESSAGE, uv_bau_message_intr1), | |
| #endif | |
| INTG(SPURIOUS_APIC_VECTOR, spurious_interrupt), | |
| INTG(ERROR_APIC_VECTOR, error_interrupt), | |
| #endif | |
| }; | |
| #ifdef CONFIG_X86_64 | |
| /* | |
| * Early traps running on the DEFAULT_STACK because the other interrupt | |
| * stacks work only after cpu_init(). | |
| */ | |
| static const __initconst struct idt_data early_pf_idts[] = { | |
| INTG(X86_TRAP_PF, page_fault), | |
| }; | |
| /* | |
| * Override for the debug_idt. Same as the default, but with interrupt | |
| * stack set to DEFAULT_STACK (0). Required for NMI trap handling. | |
| */ | |
| static const __initconst struct idt_data dbg_idts[] = { | |
| INTG(X86_TRAP_DB, debug), | |
| }; | |
| #endif | |
| /* Must be page-aligned because the real IDT is used in a fixmap. */ | |
| gate_desc idt_table[IDT_ENTRIES] __page_aligned_bss; | |
| struct desc_ptr idt_descr __ro_after_init = { | |
| .size = (IDT_ENTRIES * 2 * sizeof(unsigned long)) - 1, | |
| .address = (unsigned long) idt_table, | |
| }; | |
| #ifdef CONFIG_X86_64 | |
| /* No need to be aligned, but done to keep all IDTs defined the same way. */ | |
| gate_desc debug_idt_table[IDT_ENTRIES] __page_aligned_bss; | |
| /* | |
| * The exceptions which use Interrupt stacks. They are setup after | |
| * cpu_init() when the TSS has been initialized. | |
| */ | |
| static const __initconst struct idt_data ist_idts[] = { | |
| ISTG(X86_TRAP_DB, debug, DEBUG_STACK), | |
| ISTG(X86_TRAP_NMI, nmi, NMI_STACK), | |
| ISTG(X86_TRAP_DF, double_fault, DOUBLEFAULT_STACK), | |
| #ifdef CONFIG_X86_MCE | |
| ISTG(X86_TRAP_MC, &machine_check, MCE_STACK), | |
| #endif | |
| }; | |
| /* | |
| * Override for the debug_idt. Same as the default, but with interrupt | |
| * stack set to DEFAULT_STACK (0). Required for NMI trap handling. | |
| */ | |
| const struct desc_ptr debug_idt_descr = { | |
| .size = IDT_ENTRIES * 16 - 1, | |
| .address = (unsigned long) debug_idt_table, | |
| }; | |
| #endif | |
| static inline void idt_init_desc(gate_desc *gate, const struct idt_data *d) | |
| { | |
| unsigned long addr = (unsigned long) d->addr; | |
| gate->offset_low = (u16) addr; | |
| gate->segment = (u16) d->segment; | |
| gate->bits = d->bits; | |
| gate->offset_middle = (u16) (addr >> 16); | |
| #ifdef CONFIG_X86_64 | |
| gate->offset_high = (u32) (addr >> 32); | |
| gate->reserved = 0; | |
| #endif | |
| } | |
| static void | |
| idt_setup_from_table(gate_desc *idt, const struct idt_data *t, int size, bool sys) | |
| { | |
| gate_desc desc; | |
| for (; size > 0; t++, size--) { | |
| idt_init_desc(&desc, t); | |
| write_idt_entry(idt, t->vector, &desc); | |
| if (sys) | |
| set_bit(t->vector, system_vectors); | |
| } | |
| } | |
| static void set_intr_gate(unsigned int n, const void *addr) | |
| { | |
| struct idt_data data; | |
| BUG_ON(n > 0xFF); | |
| memset(&data, 0, sizeof(data)); | |
| data.vector = n; | |
| data.addr = addr; | |
| data.segment = __KERNEL_CS; | |
| data.bits.type = GATE_INTERRUPT; | |
| data.bits.p = 1; | |
| idt_setup_from_table(idt_table, &data, 1, false); | |
| } | |
| /** | |
| * idt_setup_early_traps - Initialize the idt table with early traps | |
| * | |
| * On X8664 these traps do not use interrupt stacks as they can't work | |
| * before cpu_init() is invoked and sets up TSS. The IST variants are | |
| * installed after that. | |
| */ | |
| void __init idt_setup_early_traps(void) | |
| { | |
| idt_setup_from_table(idt_table, early_idts, ARRAY_SIZE(early_idts), | |
| true); | |
| load_idt(&idt_descr); | |
| } | |
| /** | |
| * idt_setup_traps - Initialize the idt table with default traps | |
| */ | |
| void __init idt_setup_traps(void) | |
| { | |
| idt_setup_from_table(idt_table, def_idts, ARRAY_SIZE(def_idts), true); | |
| } | |
| #ifdef CONFIG_X86_64 | |
| /** | |
| * idt_setup_early_pf - Initialize the idt table with early pagefault handler | |
| * | |
| * On X8664 this does not use interrupt stacks as they can't work before | |
| * cpu_init() is invoked and sets up TSS. The IST variant is installed | |
| * after that. | |
| * | |
| * FIXME: Why is 32bit and 64bit installing the PF handler at different | |
| * places in the early setup code? | |
| */ | |
| void __init idt_setup_early_pf(void) | |
| { | |
| idt_setup_from_table(idt_table, early_pf_idts, | |
| ARRAY_SIZE(early_pf_idts), true); | |
| } | |
| /** | |
| * idt_setup_ist_traps - Initialize the idt table with traps using IST | |
| */ | |
| void __init idt_setup_ist_traps(void) | |
| { | |
| idt_setup_from_table(idt_table, ist_idts, ARRAY_SIZE(ist_idts), true); | |
| } | |
| /** | |
| * idt_setup_debugidt_traps - Initialize the debug idt table with debug traps | |
| */ | |
| void __init idt_setup_debugidt_traps(void) | |
| { | |
| memcpy(&debug_idt_table, &idt_table, IDT_ENTRIES * 16); | |
| idt_setup_from_table(debug_idt_table, dbg_idts, ARRAY_SIZE(dbg_idts), false); | |
| } | |
| #endif | |
| /** | |
| * idt_setup_apic_and_irq_gates - Setup APIC/SMP and normal interrupt gates | |
| */ | |
| void __init idt_setup_apic_and_irq_gates(void) | |
| { | |
| int i = FIRST_EXTERNAL_VECTOR; | |
| void *entry; | |
| idt_setup_from_table(idt_table, apic_idts, ARRAY_SIZE(apic_idts), true); | |
| for_each_clear_bit_from(i, system_vectors, FIRST_SYSTEM_VECTOR) { | |
| entry = irq_entries_start + 8 * (i - FIRST_EXTERNAL_VECTOR); | |
| set_intr_gate(i, entry); | |
| } | |
| #ifdef CONFIG_X86_LOCAL_APIC | |
| for_each_clear_bit_from(i, system_vectors, NR_VECTORS) { | |
| set_bit(i, system_vectors); | |
| entry = spurious_entries_start + 8 * (i - FIRST_SYSTEM_VECTOR); | |
| set_intr_gate(i, entry); | |
| } | |
| #endif | |
| } | |
| /** | |
| * idt_setup_early_handler - Initializes the idt table with early handlers | |
| */ | |
| void __init idt_setup_early_handler(void) | |
| { | |
| int i; | |
| for (i = 0; i < NUM_EXCEPTION_VECTORS; i++) | |
| set_intr_gate(i, early_idt_handler_array[i]); | |
| #ifdef CONFIG_X86_32 | |
| for ( ; i < NR_VECTORS; i++) | |
| set_intr_gate(i, early_ignore_irq); | |
| #endif | |
| load_idt(&idt_descr); | |
| } | |
| /** | |
| * idt_invalidate - Invalidate interrupt descriptor table | |
| * @addr: The virtual address of the 'invalid' IDT | |
| */ | |
| void idt_invalidate(void *addr) | |
| { | |
| struct desc_ptr idt = { .address = (unsigned long) addr, .size = 0 }; | |
| load_idt(&idt); | |
| } | |
| void __init update_intr_gate(unsigned int n, const void *addr) | |
| { | |
| if (WARN_ON_ONCE(!test_bit(n, system_vectors))) | |
| return; | |
| set_intr_gate(n, addr); | |
| } | |
| void alloc_intr_gate(unsigned int n, const void *addr) | |
| { | |
| BUG_ON(n < FIRST_SYSTEM_VECTOR); | |
| if (!test_and_set_bit(n, system_vectors)) | |
| set_intr_gate(n, addr); | |
| } |