| /* | |
| * Dynamic DMA mapping support for AMD Hammer. | |
| * | |
| * Use the integrated AGP GART in the Hammer northbridge as an IOMMU for PCI. | |
| * This allows to use PCI devices that only support 32bit addresses on systems | |
| * with more than 4GB. | |
| * | |
| * See Documentation/DMA-API-HOWTO.txt for the interface specification. | |
| * | |
| * Copyright 2002 Andi Kleen, SuSE Labs. | |
| * Subject to the GNU General Public License v2 only. | |
| */ | |
| #include <linux/types.h> | |
| #include <linux/ctype.h> | |
| #include <linux/agp_backend.h> | |
| #include <linux/init.h> | |
| #include <linux/mm.h> | |
| #include <linux/sched.h> | |
| #include <linux/sched/debug.h> | |
| #include <linux/string.h> | |
| #include <linux/spinlock.h> | |
| #include <linux/pci.h> | |
| #include <linux/topology.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/bitmap.h> | |
| #include <linux/kdebug.h> | |
| #include <linux/scatterlist.h> | |
| #include <linux/iommu-helper.h> | |
| #include <linux/syscore_ops.h> | |
| #include <linux/io.h> | |
| #include <linux/gfp.h> | |
| #include <linux/atomic.h> | |
| #include <linux/dma-direct.h> | |
| #include <asm/mtrr.h> | |
| #include <asm/pgtable.h> | |
| #include <asm/proto.h> | |
| #include <asm/iommu.h> | |
| #include <asm/gart.h> | |
| #include <asm/set_memory.h> | |
| #include <asm/swiotlb.h> | |
| #include <asm/dma.h> | |
| #include <asm/amd_nb.h> | |
| #include <asm/x86_init.h> | |
| #include <asm/iommu_table.h> | |
| static unsigned long iommu_bus_base; /* GART remapping area (physical) */ | |
| static unsigned long iommu_size; /* size of remapping area bytes */ | |
| static unsigned long iommu_pages; /* .. and in pages */ | |
| static u32 *iommu_gatt_base; /* Remapping table */ | |
| static dma_addr_t bad_dma_addr; | |
| /* | |
| * If this is disabled the IOMMU will use an optimized flushing strategy | |
| * of only flushing when an mapping is reused. With it true the GART is | |
| * flushed for every mapping. Problem is that doing the lazy flush seems | |
| * to trigger bugs with some popular PCI cards, in particular 3ware (but | |
| * has been also also seen with Qlogic at least). | |
| */ | |
| static int iommu_fullflush = 1; | |
| /* Allocation bitmap for the remapping area: */ | |
| static DEFINE_SPINLOCK(iommu_bitmap_lock); | |
| /* Guarded by iommu_bitmap_lock: */ | |
| static unsigned long *iommu_gart_bitmap; | |
| static u32 gart_unmapped_entry; | |
| #define GPTE_VALID 1 | |
| #define GPTE_COHERENT 2 | |
| #define GPTE_ENCODE(x) \ | |
| (((x) & 0xfffff000) | (((x) >> 32) << 4) | GPTE_VALID | GPTE_COHERENT) | |
| #define GPTE_DECODE(x) (((x) & 0xfffff000) | (((u64)(x) & 0xff0) << 28)) | |
| #define EMERGENCY_PAGES 32 /* = 128KB */ | |
| #ifdef CONFIG_AGP | |
| #define AGPEXTERN extern | |
| #else | |
| #define AGPEXTERN | |
| #endif | |
| /* GART can only remap to physical addresses < 1TB */ | |
| #define GART_MAX_PHYS_ADDR (1ULL << 40) | |
| /* backdoor interface to AGP driver */ | |
| AGPEXTERN int agp_memory_reserved; | |
| AGPEXTERN __u32 *agp_gatt_table; | |
| static unsigned long next_bit; /* protected by iommu_bitmap_lock */ | |
| static bool need_flush; /* global flush state. set for each gart wrap */ | |
| static unsigned long alloc_iommu(struct device *dev, int size, | |
| unsigned long align_mask) | |
| { | |
| unsigned long offset, flags; | |
| unsigned long boundary_size; | |
| unsigned long base_index; | |
| base_index = ALIGN(iommu_bus_base & dma_get_seg_boundary(dev), | |
| PAGE_SIZE) >> PAGE_SHIFT; | |
| boundary_size = ALIGN((u64)dma_get_seg_boundary(dev) + 1, | |
| PAGE_SIZE) >> PAGE_SHIFT; | |
| spin_lock_irqsave(&iommu_bitmap_lock, flags); | |
| offset = iommu_area_alloc(iommu_gart_bitmap, iommu_pages, next_bit, | |
| size, base_index, boundary_size, align_mask); | |
| if (offset == -1) { | |
| need_flush = true; | |
| offset = iommu_area_alloc(iommu_gart_bitmap, iommu_pages, 0, | |
| size, base_index, boundary_size, | |
| align_mask); | |
| } | |
| if (offset != -1) { | |
| next_bit = offset+size; | |
| if (next_bit >= iommu_pages) { | |
| next_bit = 0; | |
| need_flush = true; | |
| } | |
| } | |
| if (iommu_fullflush) | |
| need_flush = true; | |
| spin_unlock_irqrestore(&iommu_bitmap_lock, flags); | |
| return offset; | |
| } | |
| static void free_iommu(unsigned long offset, int size) | |
| { | |
| unsigned long flags; | |
| spin_lock_irqsave(&iommu_bitmap_lock, flags); | |
| bitmap_clear(iommu_gart_bitmap, offset, size); | |
| if (offset >= next_bit) | |
| next_bit = offset + size; | |
| spin_unlock_irqrestore(&iommu_bitmap_lock, flags); | |
| } | |
| /* | |
| * Use global flush state to avoid races with multiple flushers. | |
| */ | |
| static void flush_gart(void) | |
| { | |
| unsigned long flags; | |
| spin_lock_irqsave(&iommu_bitmap_lock, flags); | |
| if (need_flush) { | |
| amd_flush_garts(); | |
| need_flush = false; | |
| } | |
| spin_unlock_irqrestore(&iommu_bitmap_lock, flags); | |
| } | |
| #ifdef CONFIG_IOMMU_LEAK | |
| /* Debugging aid for drivers that don't free their IOMMU tables */ | |
| static int leak_trace; | |
| static int iommu_leak_pages = 20; | |
| static void dump_leak(void) | |
| { | |
| static int dump; | |
| if (dump) | |
| return; | |
| dump = 1; | |
| show_stack(NULL, NULL); | |
| debug_dma_dump_mappings(NULL); | |
| } | |
| #endif | |
| static void iommu_full(struct device *dev, size_t size, int dir) | |
| { | |
| /* | |
| * Ran out of IOMMU space for this operation. This is very bad. | |
| * Unfortunately the drivers cannot handle this operation properly. | |
| * Return some non mapped prereserved space in the aperture and | |
| * let the Northbridge deal with it. This will result in garbage | |
| * in the IO operation. When the size exceeds the prereserved space | |
| * memory corruption will occur or random memory will be DMAed | |
| * out. Hopefully no network devices use single mappings that big. | |
| */ | |
| dev_err(dev, "PCI-DMA: Out of IOMMU space for %lu bytes\n", size); | |
| if (size > PAGE_SIZE*EMERGENCY_PAGES) { | |
| if (dir == PCI_DMA_FROMDEVICE || dir == PCI_DMA_BIDIRECTIONAL) | |
| panic("PCI-DMA: Memory would be corrupted\n"); | |
| if (dir == PCI_DMA_TODEVICE || dir == PCI_DMA_BIDIRECTIONAL) | |
| panic(KERN_ERR | |
| "PCI-DMA: Random memory would be DMAed\n"); | |
| } | |
| #ifdef CONFIG_IOMMU_LEAK | |
| dump_leak(); | |
| #endif | |
| } | |
| static inline int | |
| need_iommu(struct device *dev, unsigned long addr, size_t size) | |
| { | |
| return force_iommu || !dma_capable(dev, addr, size); | |
| } | |
| static inline int | |
| nonforced_iommu(struct device *dev, unsigned long addr, size_t size) | |
| { | |
| return !dma_capable(dev, addr, size); | |
| } | |
| /* Map a single continuous physical area into the IOMMU. | |
| * Caller needs to check if the iommu is needed and flush. | |
| */ | |
| static dma_addr_t dma_map_area(struct device *dev, dma_addr_t phys_mem, | |
| size_t size, int dir, unsigned long align_mask) | |
| { | |
| unsigned long npages = iommu_num_pages(phys_mem, size, PAGE_SIZE); | |
| unsigned long iommu_page; | |
| int i; | |
| if (unlikely(phys_mem + size > GART_MAX_PHYS_ADDR)) | |
| return bad_dma_addr; | |
| iommu_page = alloc_iommu(dev, npages, align_mask); | |
| if (iommu_page == -1) { | |
| if (!nonforced_iommu(dev, phys_mem, size)) | |
| return phys_mem; | |
| if (panic_on_overflow) | |
| panic("dma_map_area overflow %lu bytes\n", size); | |
| iommu_full(dev, size, dir); | |
| return bad_dma_addr; | |
| } | |
| for (i = 0; i < npages; i++) { | |
| iommu_gatt_base[iommu_page + i] = GPTE_ENCODE(phys_mem); | |
| phys_mem += PAGE_SIZE; | |
| } | |
| return iommu_bus_base + iommu_page*PAGE_SIZE + (phys_mem & ~PAGE_MASK); | |
| } | |
| /* Map a single area into the IOMMU */ | |
| static dma_addr_t gart_map_page(struct device *dev, struct page *page, | |
| unsigned long offset, size_t size, | |
| enum dma_data_direction dir, | |
| unsigned long attrs) | |
| { | |
| unsigned long bus; | |
| phys_addr_t paddr = page_to_phys(page) + offset; | |
| if (!dev) | |
| dev = &x86_dma_fallback_dev; | |
| if (!need_iommu(dev, paddr, size)) | |
| return paddr; | |
| bus = dma_map_area(dev, paddr, size, dir, 0); | |
| flush_gart(); | |
| return bus; | |
| } | |
| /* | |
| * Free a DMA mapping. | |
| */ | |
| static void gart_unmap_page(struct device *dev, dma_addr_t dma_addr, | |
| size_t size, enum dma_data_direction dir, | |
| unsigned long attrs) | |
| { | |
| unsigned long iommu_page; | |
| int npages; | |
| int i; | |
| if (dma_addr < iommu_bus_base + EMERGENCY_PAGES*PAGE_SIZE || | |
| dma_addr >= iommu_bus_base + iommu_size) | |
| return; | |
| iommu_page = (dma_addr - iommu_bus_base)>>PAGE_SHIFT; | |
| npages = iommu_num_pages(dma_addr, size, PAGE_SIZE); | |
| for (i = 0; i < npages; i++) { | |
| iommu_gatt_base[iommu_page + i] = gart_unmapped_entry; | |
| } | |
| free_iommu(iommu_page, npages); | |
| } | |
| /* | |
| * Wrapper for pci_unmap_single working with scatterlists. | |
| */ | |
| static void gart_unmap_sg(struct device *dev, struct scatterlist *sg, int nents, | |
| enum dma_data_direction dir, unsigned long attrs) | |
| { | |
| struct scatterlist *s; | |
| int i; | |
| for_each_sg(sg, s, nents, i) { | |
| if (!s->dma_length || !s->length) | |
| break; | |
| gart_unmap_page(dev, s->dma_address, s->dma_length, dir, 0); | |
| } | |
| } | |
| /* Fallback for dma_map_sg in case of overflow */ | |
| static int dma_map_sg_nonforce(struct device *dev, struct scatterlist *sg, | |
| int nents, int dir) | |
| { | |
| struct scatterlist *s; | |
| int i; | |
| #ifdef CONFIG_IOMMU_DEBUG | |
| pr_debug("dma_map_sg overflow\n"); | |
| #endif | |
| for_each_sg(sg, s, nents, i) { | |
| unsigned long addr = sg_phys(s); | |
| if (nonforced_iommu(dev, addr, s->length)) { | |
| addr = dma_map_area(dev, addr, s->length, dir, 0); | |
| if (addr == bad_dma_addr) { | |
| if (i > 0) | |
| gart_unmap_sg(dev, sg, i, dir, 0); | |
| nents = 0; | |
| sg[0].dma_length = 0; | |
| break; | |
| } | |
| } | |
| s->dma_address = addr; | |
| s->dma_length = s->length; | |
| } | |
| flush_gart(); | |
| return nents; | |
| } | |
| /* Map multiple scatterlist entries continuous into the first. */ | |
| static int __dma_map_cont(struct device *dev, struct scatterlist *start, | |
| int nelems, struct scatterlist *sout, | |
| unsigned long pages) | |
| { | |
| unsigned long iommu_start = alloc_iommu(dev, pages, 0); | |
| unsigned long iommu_page = iommu_start; | |
| struct scatterlist *s; | |
| int i; | |
| if (iommu_start == -1) | |
| return -1; | |
| for_each_sg(start, s, nelems, i) { | |
| unsigned long pages, addr; | |
| unsigned long phys_addr = s->dma_address; | |
| BUG_ON(s != start && s->offset); | |
| if (s == start) { | |
| sout->dma_address = iommu_bus_base; | |
| sout->dma_address += iommu_page*PAGE_SIZE + s->offset; | |
| sout->dma_length = s->length; | |
| } else { | |
| sout->dma_length += s->length; | |
| } | |
| addr = phys_addr; | |
| pages = iommu_num_pages(s->offset, s->length, PAGE_SIZE); | |
| while (pages--) { | |
| iommu_gatt_base[iommu_page] = GPTE_ENCODE(addr); | |
| addr += PAGE_SIZE; | |
| iommu_page++; | |
| } | |
| } | |
| BUG_ON(iommu_page - iommu_start != pages); | |
| return 0; | |
| } | |
| static inline int | |
| dma_map_cont(struct device *dev, struct scatterlist *start, int nelems, | |
| struct scatterlist *sout, unsigned long pages, int need) | |
| { | |
| if (!need) { | |
| BUG_ON(nelems != 1); | |
| sout->dma_address = start->dma_address; | |
| sout->dma_length = start->length; | |
| return 0; | |
| } | |
| return __dma_map_cont(dev, start, nelems, sout, pages); | |
| } | |
| /* | |
| * DMA map all entries in a scatterlist. | |
| * Merge chunks that have page aligned sizes into a continuous mapping. | |
| */ | |
| static int gart_map_sg(struct device *dev, struct scatterlist *sg, int nents, | |
| enum dma_data_direction dir, unsigned long attrs) | |
| { | |
| struct scatterlist *s, *ps, *start_sg, *sgmap; | |
| int need = 0, nextneed, i, out, start; | |
| unsigned long pages = 0; | |
| unsigned int seg_size; | |
| unsigned int max_seg_size; | |
| if (nents == 0) | |
| return 0; | |
| if (!dev) | |
| dev = &x86_dma_fallback_dev; | |
| out = 0; | |
| start = 0; | |
| start_sg = sg; | |
| sgmap = sg; | |
| seg_size = 0; | |
| max_seg_size = dma_get_max_seg_size(dev); | |
| ps = NULL; /* shut up gcc */ | |
| for_each_sg(sg, s, nents, i) { | |
| dma_addr_t addr = sg_phys(s); | |
| s->dma_address = addr; | |
| BUG_ON(s->length == 0); | |
| nextneed = need_iommu(dev, addr, s->length); | |
| /* Handle the previous not yet processed entries */ | |
| if (i > start) { | |
| /* | |
| * Can only merge when the last chunk ends on a | |
| * page boundary and the new one doesn't have an | |
| * offset. | |
| */ | |
| if (!iommu_merge || !nextneed || !need || s->offset || | |
| (s->length + seg_size > max_seg_size) || | |
| (ps->offset + ps->length) % PAGE_SIZE) { | |
| if (dma_map_cont(dev, start_sg, i - start, | |
| sgmap, pages, need) < 0) | |
| goto error; | |
| out++; | |
| seg_size = 0; | |
| sgmap = sg_next(sgmap); | |
| pages = 0; | |
| start = i; | |
| start_sg = s; | |
| } | |
| } | |
| seg_size += s->length; | |
| need = nextneed; | |
| pages += iommu_num_pages(s->offset, s->length, PAGE_SIZE); | |
| ps = s; | |
| } | |
| if (dma_map_cont(dev, start_sg, i - start, sgmap, pages, need) < 0) | |
| goto error; | |
| out++; | |
| flush_gart(); | |
| if (out < nents) { | |
| sgmap = sg_next(sgmap); | |
| sgmap->dma_length = 0; | |
| } | |
| return out; | |
| error: | |
| flush_gart(); | |
| gart_unmap_sg(dev, sg, out, dir, 0); | |
| /* When it was forced or merged try again in a dumb way */ | |
| if (force_iommu || iommu_merge) { | |
| out = dma_map_sg_nonforce(dev, sg, nents, dir); | |
| if (out > 0) | |
| return out; | |
| } | |
| if (panic_on_overflow) | |
| panic("dma_map_sg: overflow on %lu pages\n", pages); | |
| iommu_full(dev, pages << PAGE_SHIFT, dir); | |
| for_each_sg(sg, s, nents, i) | |
| s->dma_address = bad_dma_addr; | |
| return 0; | |
| } | |
| /* allocate and map a coherent mapping */ | |
| static void * | |
| gart_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_addr, | |
| gfp_t flag, unsigned long attrs) | |
| { | |
| void *vaddr; | |
| vaddr = dma_direct_alloc(dev, size, dma_addr, flag, attrs); | |
| if (!vaddr || | |
| !force_iommu || dev->coherent_dma_mask <= DMA_BIT_MASK(24)) | |
| return vaddr; | |
| *dma_addr = dma_map_area(dev, virt_to_phys(vaddr), size, | |
| DMA_BIDIRECTIONAL, (1UL << get_order(size)) - 1); | |
| flush_gart(); | |
| if (unlikely(*dma_addr == bad_dma_addr)) | |
| goto out_free; | |
| return vaddr; | |
| out_free: | |
| dma_direct_free(dev, size, vaddr, *dma_addr, attrs); | |
| return NULL; | |
| } | |
| /* free a coherent mapping */ | |
| static void | |
| gart_free_coherent(struct device *dev, size_t size, void *vaddr, | |
| dma_addr_t dma_addr, unsigned long attrs) | |
| { | |
| gart_unmap_page(dev, dma_addr, size, DMA_BIDIRECTIONAL, 0); | |
| dma_direct_free(dev, size, vaddr, dma_addr, attrs); | |
| } | |
| static int gart_mapping_error(struct device *dev, dma_addr_t dma_addr) | |
| { | |
| return (dma_addr == bad_dma_addr); | |
| } | |
| static int no_agp; | |
| static __init unsigned long check_iommu_size(unsigned long aper, u64 aper_size) | |
| { | |
| unsigned long a; | |
| if (!iommu_size) { | |
| iommu_size = aper_size; | |
| if (!no_agp) | |
| iommu_size /= 2; | |
| } | |
| a = aper + iommu_size; | |
| iommu_size -= round_up(a, PMD_PAGE_SIZE) - a; | |
| if (iommu_size < 64*1024*1024) { | |
| pr_warning( | |
| "PCI-DMA: Warning: Small IOMMU %luMB." | |
| " Consider increasing the AGP aperture in BIOS\n", | |
| iommu_size >> 20); | |
| } | |
| return iommu_size; | |
| } | |
| static __init unsigned read_aperture(struct pci_dev *dev, u32 *size) | |
| { | |
| unsigned aper_size = 0, aper_base_32, aper_order; | |
| u64 aper_base; | |
| pci_read_config_dword(dev, AMD64_GARTAPERTUREBASE, &aper_base_32); | |
| pci_read_config_dword(dev, AMD64_GARTAPERTURECTL, &aper_order); | |
| aper_order = (aper_order >> 1) & 7; | |
| aper_base = aper_base_32 & 0x7fff; | |
| aper_base <<= 25; | |
| aper_size = (32 * 1024 * 1024) << aper_order; | |
| if (aper_base + aper_size > 0x100000000UL || !aper_size) | |
| aper_base = 0; | |
| *size = aper_size; | |
| return aper_base; | |
| } | |
| static void enable_gart_translations(void) | |
| { | |
| int i; | |
| if (!amd_nb_has_feature(AMD_NB_GART)) | |
| return; | |
| for (i = 0; i < amd_nb_num(); i++) { | |
| struct pci_dev *dev = node_to_amd_nb(i)->misc; | |
| enable_gart_translation(dev, __pa(agp_gatt_table)); | |
| } | |
| /* Flush the GART-TLB to remove stale entries */ | |
| amd_flush_garts(); | |
| } | |
| /* | |
| * If fix_up_north_bridges is set, the north bridges have to be fixed up on | |
| * resume in the same way as they are handled in gart_iommu_hole_init(). | |
| */ | |
| static bool fix_up_north_bridges; | |
| static u32 aperture_order; | |
| static u32 aperture_alloc; | |
| void set_up_gart_resume(u32 aper_order, u32 aper_alloc) | |
| { | |
| fix_up_north_bridges = true; | |
| aperture_order = aper_order; | |
| aperture_alloc = aper_alloc; | |
| } | |
| static void gart_fixup_northbridges(void) | |
| { | |
| int i; | |
| if (!fix_up_north_bridges) | |
| return; | |
| if (!amd_nb_has_feature(AMD_NB_GART)) | |
| return; | |
| pr_info("PCI-DMA: Restoring GART aperture settings\n"); | |
| for (i = 0; i < amd_nb_num(); i++) { | |
| struct pci_dev *dev = node_to_amd_nb(i)->misc; | |
| /* | |
| * Don't enable translations just yet. That is the next | |
| * step. Restore the pre-suspend aperture settings. | |
| */ | |
| gart_set_size_and_enable(dev, aperture_order); | |
| pci_write_config_dword(dev, AMD64_GARTAPERTUREBASE, aperture_alloc >> 25); | |
| } | |
| } | |
| static void gart_resume(void) | |
| { | |
| pr_info("PCI-DMA: Resuming GART IOMMU\n"); | |
| gart_fixup_northbridges(); | |
| enable_gart_translations(); | |
| } | |
| static struct syscore_ops gart_syscore_ops = { | |
| .resume = gart_resume, | |
| }; | |
| /* | |
| * Private Northbridge GATT initialization in case we cannot use the | |
| * AGP driver for some reason. | |
| */ | |
| static __init int init_amd_gatt(struct agp_kern_info *info) | |
| { | |
| unsigned aper_size, gatt_size, new_aper_size; | |
| unsigned aper_base, new_aper_base; | |
| struct pci_dev *dev; | |
| void *gatt; | |
| int i; | |
| pr_info("PCI-DMA: Disabling AGP.\n"); | |
| aper_size = aper_base = info->aper_size = 0; | |
| dev = NULL; | |
| for (i = 0; i < amd_nb_num(); i++) { | |
| dev = node_to_amd_nb(i)->misc; | |
| new_aper_base = read_aperture(dev, &new_aper_size); | |
| if (!new_aper_base) | |
| goto nommu; | |
| if (!aper_base) { | |
| aper_size = new_aper_size; | |
| aper_base = new_aper_base; | |
| } | |
| if (aper_size != new_aper_size || aper_base != new_aper_base) | |
| goto nommu; | |
| } | |
| if (!aper_base) | |
| goto nommu; | |
| info->aper_base = aper_base; | |
| info->aper_size = aper_size >> 20; | |
| gatt_size = (aper_size >> PAGE_SHIFT) * sizeof(u32); | |
| gatt = (void *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, | |
| get_order(gatt_size)); | |
| if (!gatt) | |
| panic("Cannot allocate GATT table"); | |
| if (set_memory_uc((unsigned long)gatt, gatt_size >> PAGE_SHIFT)) | |
| panic("Could not set GART PTEs to uncacheable pages"); | |
| agp_gatt_table = gatt; | |
| register_syscore_ops(&gart_syscore_ops); | |
| flush_gart(); | |
| pr_info("PCI-DMA: aperture base @ %x size %u KB\n", | |
| aper_base, aper_size>>10); | |
| return 0; | |
| nommu: | |
| /* Should not happen anymore */ | |
| pr_warning("PCI-DMA: More than 4GB of RAM and no IOMMU\n" | |
| "falling back to iommu=soft.\n"); | |
| return -1; | |
| } | |
| static const struct dma_map_ops gart_dma_ops = { | |
| .map_sg = gart_map_sg, | |
| .unmap_sg = gart_unmap_sg, | |
| .map_page = gart_map_page, | |
| .unmap_page = gart_unmap_page, | |
| .alloc = gart_alloc_coherent, | |
| .free = gart_free_coherent, | |
| .mapping_error = gart_mapping_error, | |
| .dma_supported = dma_direct_supported, | |
| }; | |
| static void gart_iommu_shutdown(void) | |
| { | |
| struct pci_dev *dev; | |
| int i; | |
| /* don't shutdown it if there is AGP installed */ | |
| if (!no_agp) | |
| return; | |
| if (!amd_nb_has_feature(AMD_NB_GART)) | |
| return; | |
| for (i = 0; i < amd_nb_num(); i++) { | |
| u32 ctl; | |
| dev = node_to_amd_nb(i)->misc; | |
| pci_read_config_dword(dev, AMD64_GARTAPERTURECTL, &ctl); | |
| ctl &= ~GARTEN; | |
| pci_write_config_dword(dev, AMD64_GARTAPERTURECTL, ctl); | |
| } | |
| } | |
| int __init gart_iommu_init(void) | |
| { | |
| struct agp_kern_info info; | |
| unsigned long iommu_start; | |
| unsigned long aper_base, aper_size; | |
| unsigned long start_pfn, end_pfn; | |
| unsigned long scratch; | |
| long i; | |
| if (!amd_nb_has_feature(AMD_NB_GART)) | |
| return 0; | |
| #ifndef CONFIG_AGP_AMD64 | |
| no_agp = 1; | |
| #else | |
| /* Makefile puts PCI initialization via subsys_initcall first. */ | |
| /* Add other AMD AGP bridge drivers here */ | |
| no_agp = no_agp || | |
| (agp_amd64_init() < 0) || | |
| (agp_copy_info(agp_bridge, &info) < 0); | |
| #endif | |
| if (no_iommu || | |
| (!force_iommu && max_pfn <= MAX_DMA32_PFN) || | |
| !gart_iommu_aperture || | |
| (no_agp && init_amd_gatt(&info) < 0)) { | |
| if (max_pfn > MAX_DMA32_PFN) { | |
| pr_warning("More than 4GB of memory but GART IOMMU not available.\n"); | |
| pr_warning("falling back to iommu=soft.\n"); | |
| } | |
| return 0; | |
| } | |
| /* need to map that range */ | |
| aper_size = info.aper_size << 20; | |
| aper_base = info.aper_base; | |
| end_pfn = (aper_base>>PAGE_SHIFT) + (aper_size>>PAGE_SHIFT); | |
| start_pfn = PFN_DOWN(aper_base); | |
| if (!pfn_range_is_mapped(start_pfn, end_pfn)) | |
| init_memory_mapping(start_pfn<<PAGE_SHIFT, end_pfn<<PAGE_SHIFT); | |
| pr_info("PCI-DMA: using GART IOMMU.\n"); | |
| iommu_size = check_iommu_size(info.aper_base, aper_size); | |
| iommu_pages = iommu_size >> PAGE_SHIFT; | |
| iommu_gart_bitmap = (void *) __get_free_pages(GFP_KERNEL | __GFP_ZERO, | |
| get_order(iommu_pages/8)); | |
| if (!iommu_gart_bitmap) | |
| panic("Cannot allocate iommu bitmap\n"); | |
| #ifdef CONFIG_IOMMU_LEAK | |
| if (leak_trace) { | |
| int ret; | |
| ret = dma_debug_resize_entries(iommu_pages); | |
| if (ret) | |
| pr_debug("PCI-DMA: Cannot trace all the entries\n"); | |
| } | |
| #endif | |
| /* | |
| * Out of IOMMU space handling. | |
| * Reserve some invalid pages at the beginning of the GART. | |
| */ | |
| bitmap_set(iommu_gart_bitmap, 0, EMERGENCY_PAGES); | |
| pr_info("PCI-DMA: Reserving %luMB of IOMMU area in the AGP aperture\n", | |
| iommu_size >> 20); | |
| agp_memory_reserved = iommu_size; | |
| iommu_start = aper_size - iommu_size; | |
| iommu_bus_base = info.aper_base + iommu_start; | |
| bad_dma_addr = iommu_bus_base; | |
| iommu_gatt_base = agp_gatt_table + (iommu_start>>PAGE_SHIFT); | |
| /* | |
| * Unmap the IOMMU part of the GART. The alias of the page is | |
| * always mapped with cache enabled and there is no full cache | |
| * coherency across the GART remapping. The unmapping avoids | |
| * automatic prefetches from the CPU allocating cache lines in | |
| * there. All CPU accesses are done via the direct mapping to | |
| * the backing memory. The GART address is only used by PCI | |
| * devices. | |
| */ | |
| set_memory_np((unsigned long)__va(iommu_bus_base), | |
| iommu_size >> PAGE_SHIFT); | |
| /* | |
| * Tricky. The GART table remaps the physical memory range, | |
| * so the CPU wont notice potential aliases and if the memory | |
| * is remapped to UC later on, we might surprise the PCI devices | |
| * with a stray writeout of a cacheline. So play it sure and | |
| * do an explicit, full-scale wbinvd() _after_ having marked all | |
| * the pages as Not-Present: | |
| */ | |
| wbinvd(); | |
| /* | |
| * Now all caches are flushed and we can safely enable | |
| * GART hardware. Doing it early leaves the possibility | |
| * of stale cache entries that can lead to GART PTE | |
| * errors. | |
| */ | |
| enable_gart_translations(); | |
| /* | |
| * Try to workaround a bug (thanks to BenH): | |
| * Set unmapped entries to a scratch page instead of 0. | |
| * Any prefetches that hit unmapped entries won't get an bus abort | |
| * then. (P2P bridge may be prefetching on DMA reads). | |
| */ | |
| scratch = get_zeroed_page(GFP_KERNEL); | |
| if (!scratch) | |
| panic("Cannot allocate iommu scratch page"); | |
| gart_unmapped_entry = GPTE_ENCODE(__pa(scratch)); | |
| for (i = EMERGENCY_PAGES; i < iommu_pages; i++) | |
| iommu_gatt_base[i] = gart_unmapped_entry; | |
| flush_gart(); | |
| dma_ops = &gart_dma_ops; | |
| x86_platform.iommu_shutdown = gart_iommu_shutdown; | |
| swiotlb = 0; | |
| return 0; | |
| } | |
| void __init gart_parse_options(char *p) | |
| { | |
| int arg; | |
| #ifdef CONFIG_IOMMU_LEAK | |
| if (!strncmp(p, "leak", 4)) { | |
| leak_trace = 1; | |
| p += 4; | |
| if (*p == '=') | |
| ++p; | |
| if (isdigit(*p) && get_option(&p, &arg)) | |
| iommu_leak_pages = arg; | |
| } | |
| #endif | |
| if (isdigit(*p) && get_option(&p, &arg)) | |
| iommu_size = arg; | |
| if (!strncmp(p, "fullflush", 9)) | |
| iommu_fullflush = 1; | |
| if (!strncmp(p, "nofullflush", 11)) | |
| iommu_fullflush = 0; | |
| if (!strncmp(p, "noagp", 5)) | |
| no_agp = 1; | |
| if (!strncmp(p, "noaperture", 10)) | |
| fix_aperture = 0; | |
| /* duplicated from pci-dma.c */ | |
| if (!strncmp(p, "force", 5)) | |
| gart_iommu_aperture_allowed = 1; | |
| if (!strncmp(p, "allowed", 7)) | |
| gart_iommu_aperture_allowed = 1; | |
| if (!strncmp(p, "memaper", 7)) { | |
| fallback_aper_force = 1; | |
| p += 7; | |
| if (*p == '=') { | |
| ++p; | |
| if (get_option(&p, &arg)) | |
| fallback_aper_order = arg; | |
| } | |
| } | |
| } | |
| IOMMU_INIT_POST(gart_iommu_hole_init); |