| #ifndef _LINUX_VIRTIO_NET_H | |
| #define _LINUX_VIRTIO_NET_H | |
| /* This header is BSD licensed so anyone can use the definitions to implement | |
| * compatible drivers/servers. | |
| * | |
| * Redistribution and use in source and binary forms, with or without | |
| * modification, are permitted provided that the following conditions | |
| * are met: | |
| * 1. Redistributions of source code must retain the above copyright | |
| * notice, this list of conditions and the following disclaimer. | |
| * 2. Redistributions in binary form must reproduce the above copyright | |
| * notice, this list of conditions and the following disclaimer in the | |
| * documentation and/or other materials provided with the distribution. | |
| * 3. Neither the name of IBM nor the names of its contributors | |
| * may be used to endorse or promote products derived from this software | |
| * without specific prior written permission. | |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND | |
| * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE | |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE | |
| * ARE DISCLAIMED. IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE | |
| * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS | |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) | |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT | |
| * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY | |
| * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF | |
| * SUCH DAMAGE. */ | |
| #include <linux/types.h> | |
| #include <linux/virtio_ids.h> | |
| #include <linux/virtio_config.h> | |
| #include <linux/if_ether.h> | |
| /* The feature bitmap for virtio net */ | |
| #define VIRTIO_NET_F_CSUM 0 /* Host handles pkts w/ partial csum */ | |
| #define VIRTIO_NET_F_GUEST_CSUM 1 /* Guest handles pkts w/ partial csum */ | |
| #define VIRTIO_NET_F_MAC 5 /* Host has given MAC address. */ | |
| #define VIRTIO_NET_F_GSO 6 /* Host handles pkts w/ any GSO type */ | |
| #define VIRTIO_NET_F_GUEST_TSO4 7 /* Guest can handle TSOv4 in. */ | |
| #define VIRTIO_NET_F_GUEST_TSO6 8 /* Guest can handle TSOv6 in. */ | |
| #define VIRTIO_NET_F_GUEST_ECN 9 /* Guest can handle TSO[6] w/ ECN in. */ | |
| #define VIRTIO_NET_F_GUEST_UFO 10 /* Guest can handle UFO in. */ | |
| #define VIRTIO_NET_F_HOST_TSO4 11 /* Host can handle TSOv4 in. */ | |
| #define VIRTIO_NET_F_HOST_TSO6 12 /* Host can handle TSOv6 in. */ | |
| #define VIRTIO_NET_F_HOST_ECN 13 /* Host can handle TSO[6] w/ ECN in. */ | |
| #define VIRTIO_NET_F_HOST_UFO 14 /* Host can handle UFO in. */ | |
| #define VIRTIO_NET_F_MRG_RXBUF 15 /* Host can merge receive buffers. */ | |
| #define VIRTIO_NET_F_STATUS 16 /* virtio_net_config.status available */ | |
| #define VIRTIO_NET_F_CTRL_VQ 17 /* Control channel available */ | |
| #define VIRTIO_NET_F_CTRL_RX 18 /* Control channel RX mode support */ | |
| #define VIRTIO_NET_F_CTRL_VLAN 19 /* Control channel VLAN filtering */ | |
| #define VIRTIO_NET_F_CTRL_RX_EXTRA 20 /* Extra RX mode control support */ | |
| #define VIRTIO_NET_S_LINK_UP 1 /* Link is up */ | |
| struct virtio_net_config { | |
| /* The config defining mac address (if VIRTIO_NET_F_MAC) */ | |
| __u8 mac[6]; | |
| /* See VIRTIO_NET_F_STATUS and VIRTIO_NET_S_* above */ | |
| __u16 status; | |
| } __attribute__((packed)); | |
| /* This is the first element of the scatter-gather list. If you don't | |
| * specify GSO or CSUM features, you can simply ignore the header. */ | |
| struct virtio_net_hdr { | |
| #define VIRTIO_NET_HDR_F_NEEDS_CSUM 1 // Use csum_start, csum_offset | |
| #define VIRTIO_NET_HDR_F_DATA_VALID 2 // Csum is valid | |
| __u8 flags; | |
| #define VIRTIO_NET_HDR_GSO_NONE 0 // Not a GSO frame | |
| #define VIRTIO_NET_HDR_GSO_TCPV4 1 // GSO frame, IPv4 TCP (TSO) | |
| #define VIRTIO_NET_HDR_GSO_UDP 3 // GSO frame, IPv4 UDP (UFO) | |
| #define VIRTIO_NET_HDR_GSO_TCPV6 4 // GSO frame, IPv6 TCP | |
| #define VIRTIO_NET_HDR_GSO_ECN 0x80 // TCP has ECN set | |
| __u8 gso_type; | |
| __u16 hdr_len; /* Ethernet + IP + tcp/udp hdrs */ | |
| __u16 gso_size; /* Bytes to append to hdr_len per frame */ | |
| __u16 csum_start; /* Position to start checksumming from */ | |
| __u16 csum_offset; /* Offset after that to place checksum */ | |
| }; | |
| /* This is the version of the header to use when the MRG_RXBUF | |
| * feature has been negotiated. */ | |
| struct virtio_net_hdr_mrg_rxbuf { | |
| struct virtio_net_hdr hdr; | |
| __u16 num_buffers; /* Number of merged rx buffers */ | |
| }; | |
| /* | |
| * Control virtqueue data structures | |
| * | |
| * The control virtqueue expects a header in the first sg entry | |
| * and an ack/status response in the last entry. Data for the | |
| * command goes in between. | |
| */ | |
| struct virtio_net_ctrl_hdr { | |
| __u8 class; | |
| __u8 cmd; | |
| } __attribute__((packed)); | |
| typedef __u8 virtio_net_ctrl_ack; | |
| #define VIRTIO_NET_OK 0 | |
| #define VIRTIO_NET_ERR 1 | |
| /* | |
| * Control the RX mode, ie. promisucous, allmulti, etc... | |
| * All commands require an "out" sg entry containing a 1 byte | |
| * state value, zero = disable, non-zero = enable. Commands | |
| * 0 and 1 are supported with the VIRTIO_NET_F_CTRL_RX feature. | |
| * Commands 2-5 are added with VIRTIO_NET_F_CTRL_RX_EXTRA. | |
| */ | |
| #define VIRTIO_NET_CTRL_RX 0 | |
| #define VIRTIO_NET_CTRL_RX_PROMISC 0 | |
| #define VIRTIO_NET_CTRL_RX_ALLMULTI 1 | |
| #define VIRTIO_NET_CTRL_RX_ALLUNI 2 | |
| #define VIRTIO_NET_CTRL_RX_NOMULTI 3 | |
| #define VIRTIO_NET_CTRL_RX_NOUNI 4 | |
| #define VIRTIO_NET_CTRL_RX_NOBCAST 5 | |
| /* | |
| * Control the MAC filter table. | |
| * | |
| * The MAC filter table is managed by the hypervisor, the guest should | |
| * assume the size is infinite. Filtering should be considered | |
| * non-perfect, ie. based on hypervisor resources, the guest may | |
| * received packets from sources not specified in the filter list. | |
| * | |
| * In addition to the class/cmd header, the TABLE_SET command requires | |
| * two out scatterlists. Each contains a 4 byte count of entries followed | |
| * by a concatenated byte stream of the ETH_ALEN MAC addresses. The | |
| * first sg list contains unicast addresses, the second is for multicast. | |
| * This functionality is present if the VIRTIO_NET_F_CTRL_RX feature | |
| * is available. | |
| */ | |
| struct virtio_net_ctrl_mac { | |
| __u32 entries; | |
| __u8 macs[][ETH_ALEN]; | |
| } __attribute__((packed)); | |
| #define VIRTIO_NET_CTRL_MAC 1 | |
| #define VIRTIO_NET_CTRL_MAC_TABLE_SET 0 | |
| /* | |
| * Control VLAN filtering | |
| * | |
| * The VLAN filter table is controlled via a simple ADD/DEL interface. | |
| * VLAN IDs not added may be filterd by the hypervisor. Del is the | |
| * opposite of add. Both commands expect an out entry containing a 2 | |
| * byte VLAN ID. VLAN filterting is available with the | |
| * VIRTIO_NET_F_CTRL_VLAN feature bit. | |
| */ | |
| #define VIRTIO_NET_CTRL_VLAN 2 | |
| #define VIRTIO_NET_CTRL_VLAN_ADD 0 | |
| #define VIRTIO_NET_CTRL_VLAN_DEL 1 | |
| #endif /* _LINUX_VIRTIO_NET_H */ |