| /* | |
| * CDB emulation for non-READ/WRITE commands. | |
| * | |
| * Copyright (c) 2002, 2003, 2004, 2005 PyX Technologies, Inc. | |
| * Copyright (c) 2005, 2006, 2007 SBE, Inc. | |
| * Copyright (c) 2007-2010 Rising Tide Systems | |
| * Copyright (c) 2008-2010 Linux-iSCSI.org | |
| * | |
| * Nicholas A. Bellinger <nab@kernel.org> | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <asm/unaligned.h> | |
| #include <scsi/scsi.h> | |
| #include <target/target_core_base.h> | |
| #include <target/target_core_backend.h> | |
| #include <target/target_core_fabric.h> | |
| #include "target_core_internal.h" | |
| #include "target_core_ua.h" | |
| static void | |
| target_fill_alua_data(struct se_port *port, unsigned char *buf) | |
| { | |
| struct t10_alua_tg_pt_gp *tg_pt_gp; | |
| struct t10_alua_tg_pt_gp_member *tg_pt_gp_mem; | |
| /* | |
| * Set SCCS for MAINTENANCE_IN + REPORT_TARGET_PORT_GROUPS. | |
| */ | |
| buf[5] = 0x80; | |
| /* | |
| * Set TPGS field for explict and/or implict ALUA access type | |
| * and opteration. | |
| * | |
| * See spc4r17 section 6.4.2 Table 135 | |
| */ | |
| if (!port) | |
| return; | |
| tg_pt_gp_mem = port->sep_alua_tg_pt_gp_mem; | |
| if (!tg_pt_gp_mem) | |
| return; | |
| spin_lock(&tg_pt_gp_mem->tg_pt_gp_mem_lock); | |
| tg_pt_gp = tg_pt_gp_mem->tg_pt_gp; | |
| if (tg_pt_gp) | |
| buf[5] |= tg_pt_gp->tg_pt_gp_alua_access_type; | |
| spin_unlock(&tg_pt_gp_mem->tg_pt_gp_mem_lock); | |
| } | |
| static int | |
| target_emulate_inquiry_std(struct se_cmd *cmd, char *buf) | |
| { | |
| struct se_lun *lun = cmd->se_lun; | |
| struct se_device *dev = cmd->se_dev; | |
| /* Set RMB (removable media) for tape devices */ | |
| if (dev->transport->get_device_type(dev) == TYPE_TAPE) | |
| buf[1] = 0x80; | |
| buf[2] = dev->transport->get_device_rev(dev); | |
| /* | |
| * NORMACA and HISUP = 0, RESPONSE DATA FORMAT = 2 | |
| * | |
| * SPC4 says: | |
| * A RESPONSE DATA FORMAT field set to 2h indicates that the | |
| * standard INQUIRY data is in the format defined in this | |
| * standard. Response data format values less than 2h are | |
| * obsolete. Response data format values greater than 2h are | |
| * reserved. | |
| */ | |
| buf[3] = 2; | |
| /* | |
| * Enable SCCS and TPGS fields for Emulated ALUA | |
| */ | |
| if (dev->se_sub_dev->t10_alua.alua_type == SPC3_ALUA_EMULATED) | |
| target_fill_alua_data(lun->lun_sep, buf); | |
| buf[7] = 0x2; /* CmdQue=1 */ | |
| snprintf(&buf[8], 8, "LIO-ORG"); | |
| snprintf(&buf[16], 16, "%s", dev->se_sub_dev->t10_wwn.model); | |
| snprintf(&buf[32], 4, "%s", dev->se_sub_dev->t10_wwn.revision); | |
| buf[4] = 31; /* Set additional length to 31 */ | |
| return 0; | |
| } | |
| /* unit serial number */ | |
| static int | |
| target_emulate_evpd_80(struct se_cmd *cmd, unsigned char *buf) | |
| { | |
| struct se_device *dev = cmd->se_dev; | |
| u16 len = 0; | |
| if (dev->se_sub_dev->su_dev_flags & | |
| SDF_EMULATED_VPD_UNIT_SERIAL) { | |
| u32 unit_serial_len; | |
| unit_serial_len = strlen(dev->se_sub_dev->t10_wwn.unit_serial); | |
| unit_serial_len++; /* For NULL Terminator */ | |
| len += sprintf(&buf[4], "%s", | |
| dev->se_sub_dev->t10_wwn.unit_serial); | |
| len++; /* Extra Byte for NULL Terminator */ | |
| buf[3] = len; | |
| } | |
| return 0; | |
| } | |
| static void | |
| target_parse_naa_6h_vendor_specific(struct se_device *dev, unsigned char *buf) | |
| { | |
| unsigned char *p = &dev->se_sub_dev->t10_wwn.unit_serial[0]; | |
| int cnt; | |
| bool next = true; | |
| /* | |
| * Generate up to 36 bits of VENDOR SPECIFIC IDENTIFIER starting on | |
| * byte 3 bit 3-0 for NAA IEEE Registered Extended DESIGNATOR field | |
| * format, followed by 64 bits of VENDOR SPECIFIC IDENTIFIER EXTENSION | |
| * to complete the payload. These are based from VPD=0x80 PRODUCT SERIAL | |
| * NUMBER set via vpd_unit_serial in target_core_configfs.c to ensure | |
| * per device uniqeness. | |
| */ | |
| for (cnt = 0; *p && cnt < 13; p++) { | |
| int val = hex_to_bin(*p); | |
| if (val < 0) | |
| continue; | |
| if (next) { | |
| next = false; | |
| buf[cnt++] |= val; | |
| } else { | |
| next = true; | |
| buf[cnt] = val << 4; | |
| } | |
| } | |
| } | |
| /* | |
| * Device identification VPD, for a complete list of | |
| * DESIGNATOR TYPEs see spc4r17 Table 459. | |
| */ | |
| static int | |
| target_emulate_evpd_83(struct se_cmd *cmd, unsigned char *buf) | |
| { | |
| struct se_device *dev = cmd->se_dev; | |
| struct se_lun *lun = cmd->se_lun; | |
| struct se_port *port = NULL; | |
| struct se_portal_group *tpg = NULL; | |
| struct t10_alua_lu_gp_member *lu_gp_mem; | |
| struct t10_alua_tg_pt_gp *tg_pt_gp; | |
| struct t10_alua_tg_pt_gp_member *tg_pt_gp_mem; | |
| unsigned char *prod = &dev->se_sub_dev->t10_wwn.model[0]; | |
| u32 prod_len; | |
| u32 unit_serial_len, off = 0; | |
| u16 len = 0, id_len; | |
| off = 4; | |
| /* | |
| * NAA IEEE Registered Extended Assigned designator format, see | |
| * spc4r17 section 7.7.3.6.5 | |
| * | |
| * We depend upon a target_core_mod/ConfigFS provided | |
| * /sys/kernel/config/target/core/$HBA/$DEV/wwn/vpd_unit_serial | |
| * value in order to return the NAA id. | |
| */ | |
| if (!(dev->se_sub_dev->su_dev_flags & SDF_EMULATED_VPD_UNIT_SERIAL)) | |
| goto check_t10_vend_desc; | |
| /* CODE SET == Binary */ | |
| buf[off++] = 0x1; | |
| /* Set ASSOCIATION == addressed logical unit: 0)b */ | |
| buf[off] = 0x00; | |
| /* Identifier/Designator type == NAA identifier */ | |
| buf[off++] |= 0x3; | |
| off++; | |
| /* Identifier/Designator length */ | |
| buf[off++] = 0x10; | |
| /* | |
| * Start NAA IEEE Registered Extended Identifier/Designator | |
| */ | |
| buf[off++] = (0x6 << 4); | |
| /* | |
| * Use OpenFabrics IEEE Company ID: 00 14 05 | |
| */ | |
| buf[off++] = 0x01; | |
| buf[off++] = 0x40; | |
| buf[off] = (0x5 << 4); | |
| /* | |
| * Return ConfigFS Unit Serial Number information for | |
| * VENDOR_SPECIFIC_IDENTIFIER and | |
| * VENDOR_SPECIFIC_IDENTIFIER_EXTENTION | |
| */ | |
| target_parse_naa_6h_vendor_specific(dev, &buf[off]); | |
| len = 20; | |
| off = (len + 4); | |
| check_t10_vend_desc: | |
| /* | |
| * T10 Vendor Identifier Page, see spc4r17 section 7.7.3.4 | |
| */ | |
| id_len = 8; /* For Vendor field */ | |
| prod_len = 4; /* For VPD Header */ | |
| prod_len += 8; /* For Vendor field */ | |
| prod_len += strlen(prod); | |
| prod_len++; /* For : */ | |
| if (dev->se_sub_dev->su_dev_flags & | |
| SDF_EMULATED_VPD_UNIT_SERIAL) { | |
| unit_serial_len = | |
| strlen(&dev->se_sub_dev->t10_wwn.unit_serial[0]); | |
| unit_serial_len++; /* For NULL Terminator */ | |
| id_len += sprintf(&buf[off+12], "%s:%s", prod, | |
| &dev->se_sub_dev->t10_wwn.unit_serial[0]); | |
| } | |
| buf[off] = 0x2; /* ASCII */ | |
| buf[off+1] = 0x1; /* T10 Vendor ID */ | |
| buf[off+2] = 0x0; | |
| memcpy(&buf[off+4], "LIO-ORG", 8); | |
| /* Extra Byte for NULL Terminator */ | |
| id_len++; | |
| /* Identifier Length */ | |
| buf[off+3] = id_len; | |
| /* Header size for Designation descriptor */ | |
| len += (id_len + 4); | |
| off += (id_len + 4); | |
| /* | |
| * struct se_port is only set for INQUIRY VPD=1 through $FABRIC_MOD | |
| */ | |
| port = lun->lun_sep; | |
| if (port) { | |
| struct t10_alua_lu_gp *lu_gp; | |
| u32 padding, scsi_name_len; | |
| u16 lu_gp_id = 0; | |
| u16 tg_pt_gp_id = 0; | |
| u16 tpgt; | |
| tpg = port->sep_tpg; | |
| /* | |
| * Relative target port identifer, see spc4r17 | |
| * section 7.7.3.7 | |
| * | |
| * Get the PROTOCOL IDENTIFIER as defined by spc4r17 | |
| * section 7.5.1 Table 362 | |
| */ | |
| buf[off] = | |
| (tpg->se_tpg_tfo->get_fabric_proto_ident(tpg) << 4); | |
| buf[off++] |= 0x1; /* CODE SET == Binary */ | |
| buf[off] = 0x80; /* Set PIV=1 */ | |
| /* Set ASSOCIATION == target port: 01b */ | |
| buf[off] |= 0x10; | |
| /* DESIGNATOR TYPE == Relative target port identifer */ | |
| buf[off++] |= 0x4; | |
| off++; /* Skip over Reserved */ | |
| buf[off++] = 4; /* DESIGNATOR LENGTH */ | |
| /* Skip over Obsolete field in RTPI payload | |
| * in Table 472 */ | |
| off += 2; | |
| buf[off++] = ((port->sep_rtpi >> 8) & 0xff); | |
| buf[off++] = (port->sep_rtpi & 0xff); | |
| len += 8; /* Header size + Designation descriptor */ | |
| /* | |
| * Target port group identifier, see spc4r17 | |
| * section 7.7.3.8 | |
| * | |
| * Get the PROTOCOL IDENTIFIER as defined by spc4r17 | |
| * section 7.5.1 Table 362 | |
| */ | |
| if (dev->se_sub_dev->t10_alua.alua_type != | |
| SPC3_ALUA_EMULATED) | |
| goto check_scsi_name; | |
| tg_pt_gp_mem = port->sep_alua_tg_pt_gp_mem; | |
| if (!tg_pt_gp_mem) | |
| goto check_lu_gp; | |
| spin_lock(&tg_pt_gp_mem->tg_pt_gp_mem_lock); | |
| tg_pt_gp = tg_pt_gp_mem->tg_pt_gp; | |
| if (!tg_pt_gp) { | |
| spin_unlock(&tg_pt_gp_mem->tg_pt_gp_mem_lock); | |
| goto check_lu_gp; | |
| } | |
| tg_pt_gp_id = tg_pt_gp->tg_pt_gp_id; | |
| spin_unlock(&tg_pt_gp_mem->tg_pt_gp_mem_lock); | |
| buf[off] = | |
| (tpg->se_tpg_tfo->get_fabric_proto_ident(tpg) << 4); | |
| buf[off++] |= 0x1; /* CODE SET == Binary */ | |
| buf[off] = 0x80; /* Set PIV=1 */ | |
| /* Set ASSOCIATION == target port: 01b */ | |
| buf[off] |= 0x10; | |
| /* DESIGNATOR TYPE == Target port group identifier */ | |
| buf[off++] |= 0x5; | |
| off++; /* Skip over Reserved */ | |
| buf[off++] = 4; /* DESIGNATOR LENGTH */ | |
| off += 2; /* Skip over Reserved Field */ | |
| buf[off++] = ((tg_pt_gp_id >> 8) & 0xff); | |
| buf[off++] = (tg_pt_gp_id & 0xff); | |
| len += 8; /* Header size + Designation descriptor */ | |
| /* | |
| * Logical Unit Group identifier, see spc4r17 | |
| * section 7.7.3.8 | |
| */ | |
| check_lu_gp: | |
| lu_gp_mem = dev->dev_alua_lu_gp_mem; | |
| if (!lu_gp_mem) | |
| goto check_scsi_name; | |
| spin_lock(&lu_gp_mem->lu_gp_mem_lock); | |
| lu_gp = lu_gp_mem->lu_gp; | |
| if (!lu_gp) { | |
| spin_unlock(&lu_gp_mem->lu_gp_mem_lock); | |
| goto check_scsi_name; | |
| } | |
| lu_gp_id = lu_gp->lu_gp_id; | |
| spin_unlock(&lu_gp_mem->lu_gp_mem_lock); | |
| buf[off++] |= 0x1; /* CODE SET == Binary */ | |
| /* DESIGNATOR TYPE == Logical Unit Group identifier */ | |
| buf[off++] |= 0x6; | |
| off++; /* Skip over Reserved */ | |
| buf[off++] = 4; /* DESIGNATOR LENGTH */ | |
| off += 2; /* Skip over Reserved Field */ | |
| buf[off++] = ((lu_gp_id >> 8) & 0xff); | |
| buf[off++] = (lu_gp_id & 0xff); | |
| len += 8; /* Header size + Designation descriptor */ | |
| /* | |
| * SCSI name string designator, see spc4r17 | |
| * section 7.7.3.11 | |
| * | |
| * Get the PROTOCOL IDENTIFIER as defined by spc4r17 | |
| * section 7.5.1 Table 362 | |
| */ | |
| check_scsi_name: | |
| scsi_name_len = strlen(tpg->se_tpg_tfo->tpg_get_wwn(tpg)); | |
| /* UTF-8 ",t,0x<16-bit TPGT>" + NULL Terminator */ | |
| scsi_name_len += 10; | |
| /* Check for 4-byte padding */ | |
| padding = ((-scsi_name_len) & 3); | |
| if (padding != 0) | |
| scsi_name_len += padding; | |
| /* Header size + Designation descriptor */ | |
| scsi_name_len += 4; | |
| buf[off] = | |
| (tpg->se_tpg_tfo->get_fabric_proto_ident(tpg) << 4); | |
| buf[off++] |= 0x3; /* CODE SET == UTF-8 */ | |
| buf[off] = 0x80; /* Set PIV=1 */ | |
| /* Set ASSOCIATION == target port: 01b */ | |
| buf[off] |= 0x10; | |
| /* DESIGNATOR TYPE == SCSI name string */ | |
| buf[off++] |= 0x8; | |
| off += 2; /* Skip over Reserved and length */ | |
| /* | |
| * SCSI name string identifer containing, $FABRIC_MOD | |
| * dependent information. For LIO-Target and iSCSI | |
| * Target Port, this means "<iSCSI name>,t,0x<TPGT> in | |
| * UTF-8 encoding. | |
| */ | |
| tpgt = tpg->se_tpg_tfo->tpg_get_tag(tpg); | |
| scsi_name_len = sprintf(&buf[off], "%s,t,0x%04x", | |
| tpg->se_tpg_tfo->tpg_get_wwn(tpg), tpgt); | |
| scsi_name_len += 1 /* Include NULL terminator */; | |
| /* | |
| * The null-terminated, null-padded (see 4.4.2) SCSI | |
| * NAME STRING field contains a UTF-8 format string. | |
| * The number of bytes in the SCSI NAME STRING field | |
| * (i.e., the value in the DESIGNATOR LENGTH field) | |
| * shall be no larger than 256 and shall be a multiple | |
| * of four. | |
| */ | |
| if (padding) | |
| scsi_name_len += padding; | |
| buf[off-1] = scsi_name_len; | |
| off += scsi_name_len; | |
| /* Header size + Designation descriptor */ | |
| len += (scsi_name_len + 4); | |
| } | |
| buf[2] = ((len >> 8) & 0xff); | |
| buf[3] = (len & 0xff); /* Page Length for VPD 0x83 */ | |
| return 0; | |
| } | |
| /* Extended INQUIRY Data VPD Page */ | |
| static int | |
| target_emulate_evpd_86(struct se_cmd *cmd, unsigned char *buf) | |
| { | |
| buf[3] = 0x3c; | |
| /* Set HEADSUP, ORDSUP, SIMPSUP */ | |
| buf[5] = 0x07; | |
| /* If WriteCache emulation is enabled, set V_SUP */ | |
| if (cmd->se_dev->se_sub_dev->se_dev_attrib.emulate_write_cache > 0) | |
| buf[6] = 0x01; | |
| return 0; | |
| } | |
| /* Block Limits VPD page */ | |
| static int | |
| target_emulate_evpd_b0(struct se_cmd *cmd, unsigned char *buf) | |
| { | |
| struct se_device *dev = cmd->se_dev; | |
| int have_tp = 0; | |
| /* | |
| * Following sbc3r22 section 6.5.3 Block Limits VPD page, when | |
| * emulate_tpu=1 or emulate_tpws=1 we will be expect a | |
| * different page length for Thin Provisioning. | |
| */ | |
| if (dev->se_sub_dev->se_dev_attrib.emulate_tpu || dev->se_sub_dev->se_dev_attrib.emulate_tpws) | |
| have_tp = 1; | |
| buf[0] = dev->transport->get_device_type(dev); | |
| buf[3] = have_tp ? 0x3c : 0x10; | |
| /* Set WSNZ to 1 */ | |
| buf[4] = 0x01; | |
| /* | |
| * Set OPTIMAL TRANSFER LENGTH GRANULARITY | |
| */ | |
| put_unaligned_be16(1, &buf[6]); | |
| /* | |
| * Set MAXIMUM TRANSFER LENGTH | |
| */ | |
| put_unaligned_be32(dev->se_sub_dev->se_dev_attrib.fabric_max_sectors, &buf[8]); | |
| /* | |
| * Set OPTIMAL TRANSFER LENGTH | |
| */ | |
| put_unaligned_be32(dev->se_sub_dev->se_dev_attrib.optimal_sectors, &buf[12]); | |
| /* | |
| * Exit now if we don't support TP. | |
| */ | |
| if (!have_tp) | |
| return 0; | |
| /* | |
| * Set MAXIMUM UNMAP LBA COUNT | |
| */ | |
| put_unaligned_be32(dev->se_sub_dev->se_dev_attrib.max_unmap_lba_count, &buf[20]); | |
| /* | |
| * Set MAXIMUM UNMAP BLOCK DESCRIPTOR COUNT | |
| */ | |
| put_unaligned_be32(dev->se_sub_dev->se_dev_attrib.max_unmap_block_desc_count, | |
| &buf[24]); | |
| /* | |
| * Set OPTIMAL UNMAP GRANULARITY | |
| */ | |
| put_unaligned_be32(dev->se_sub_dev->se_dev_attrib.unmap_granularity, &buf[28]); | |
| /* | |
| * UNMAP GRANULARITY ALIGNMENT | |
| */ | |
| put_unaligned_be32(dev->se_sub_dev->se_dev_attrib.unmap_granularity_alignment, | |
| &buf[32]); | |
| if (dev->se_sub_dev->se_dev_attrib.unmap_granularity_alignment != 0) | |
| buf[32] |= 0x80; /* Set the UGAVALID bit */ | |
| return 0; | |
| } | |
| /* Block Device Characteristics VPD page */ | |
| static int | |
| target_emulate_evpd_b1(struct se_cmd *cmd, unsigned char *buf) | |
| { | |
| struct se_device *dev = cmd->se_dev; | |
| buf[0] = dev->transport->get_device_type(dev); | |
| buf[3] = 0x3c; | |
| buf[5] = dev->se_sub_dev->se_dev_attrib.is_nonrot ? 1 : 0; | |
| return 0; | |
| } | |
| /* Thin Provisioning VPD */ | |
| static int | |
| target_emulate_evpd_b2(struct se_cmd *cmd, unsigned char *buf) | |
| { | |
| struct se_device *dev = cmd->se_dev; | |
| /* | |
| * From sbc3r22 section 6.5.4 Thin Provisioning VPD page: | |
| * | |
| * The PAGE LENGTH field is defined in SPC-4. If the DP bit is set to | |
| * zero, then the page length shall be set to 0004h. If the DP bit | |
| * is set to one, then the page length shall be set to the value | |
| * defined in table 162. | |
| */ | |
| buf[0] = dev->transport->get_device_type(dev); | |
| /* | |
| * Set Hardcoded length mentioned above for DP=0 | |
| */ | |
| put_unaligned_be16(0x0004, &buf[2]); | |
| /* | |
| * The THRESHOLD EXPONENT field indicates the threshold set size in | |
| * LBAs as a power of 2 (i.e., the threshold set size is equal to | |
| * 2(threshold exponent)). | |
| * | |
| * Note that this is currently set to 0x00 as mkp says it will be | |
| * changing again. We can enable this once it has settled in T10 | |
| * and is actually used by Linux/SCSI ML code. | |
| */ | |
| buf[4] = 0x00; | |
| /* | |
| * A TPU bit set to one indicates that the device server supports | |
| * the UNMAP command (see 5.25). A TPU bit set to zero indicates | |
| * that the device server does not support the UNMAP command. | |
| */ | |
| if (dev->se_sub_dev->se_dev_attrib.emulate_tpu != 0) | |
| buf[5] = 0x80; | |
| /* | |
| * A TPWS bit set to one indicates that the device server supports | |
| * the use of the WRITE SAME (16) command (see 5.42) to unmap LBAs. | |
| * A TPWS bit set to zero indicates that the device server does not | |
| * support the use of the WRITE SAME (16) command to unmap LBAs. | |
| */ | |
| if (dev->se_sub_dev->se_dev_attrib.emulate_tpws != 0) | |
| buf[5] |= 0x40; | |
| return 0; | |
| } | |
| static int | |
| target_emulate_evpd_00(struct se_cmd *cmd, unsigned char *buf); | |
| static struct { | |
| uint8_t page; | |
| int (*emulate)(struct se_cmd *, unsigned char *); | |
| } evpd_handlers[] = { | |
| { .page = 0x00, .emulate = target_emulate_evpd_00 }, | |
| { .page = 0x80, .emulate = target_emulate_evpd_80 }, | |
| { .page = 0x83, .emulate = target_emulate_evpd_83 }, | |
| { .page = 0x86, .emulate = target_emulate_evpd_86 }, | |
| { .page = 0xb0, .emulate = target_emulate_evpd_b0 }, | |
| { .page = 0xb1, .emulate = target_emulate_evpd_b1 }, | |
| { .page = 0xb2, .emulate = target_emulate_evpd_b2 }, | |
| }; | |
| /* supported vital product data pages */ | |
| static int | |
| target_emulate_evpd_00(struct se_cmd *cmd, unsigned char *buf) | |
| { | |
| int p; | |
| /* | |
| * Only report the INQUIRY EVPD=1 pages after a valid NAA | |
| * Registered Extended LUN WWN has been set via ConfigFS | |
| * during device creation/restart. | |
| */ | |
| if (cmd->se_dev->se_sub_dev->su_dev_flags & | |
| SDF_EMULATED_VPD_UNIT_SERIAL) { | |
| buf[3] = ARRAY_SIZE(evpd_handlers); | |
| for (p = 0; p < ARRAY_SIZE(evpd_handlers); ++p) | |
| buf[p + 4] = evpd_handlers[p].page; | |
| } | |
| return 0; | |
| } | |
| int target_emulate_inquiry(struct se_task *task) | |
| { | |
| struct se_cmd *cmd = task->task_se_cmd; | |
| struct se_device *dev = cmd->se_dev; | |
| struct se_portal_group *tpg = cmd->se_lun->lun_sep->sep_tpg; | |
| unsigned char *buf, *map_buf; | |
| unsigned char *cdb = cmd->t_task_cdb; | |
| int p, ret; | |
| map_buf = transport_kmap_data_sg(cmd); | |
| /* | |
| * If SCF_PASSTHROUGH_SG_TO_MEM_NOALLOC is not set, then we | |
| * know we actually allocated a full page. Otherwise, if the | |
| * data buffer is too small, allocate a temporary buffer so we | |
| * don't have to worry about overruns in all our INQUIRY | |
| * emulation handling. | |
| */ | |
| if (cmd->data_length < SE_INQUIRY_BUF && | |
| (cmd->se_cmd_flags & SCF_PASSTHROUGH_SG_TO_MEM_NOALLOC)) { | |
| buf = kzalloc(SE_INQUIRY_BUF, GFP_KERNEL); | |
| if (!buf) { | |
| transport_kunmap_data_sg(cmd); | |
| cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; | |
| return -ENOMEM; | |
| } | |
| } else { | |
| buf = map_buf; | |
| } | |
| if (dev == tpg->tpg_virt_lun0.lun_se_dev) | |
| buf[0] = 0x3f; /* Not connected */ | |
| else | |
| buf[0] = dev->transport->get_device_type(dev); | |
| if (!(cdb[1] & 0x1)) { | |
| if (cdb[2]) { | |
| pr_err("INQUIRY with EVPD==0 but PAGE CODE=%02x\n", | |
| cdb[2]); | |
| cmd->scsi_sense_reason = TCM_INVALID_CDB_FIELD; | |
| ret = -EINVAL; | |
| goto out; | |
| } | |
| ret = target_emulate_inquiry_std(cmd, buf); | |
| goto out; | |
| } | |
| for (p = 0; p < ARRAY_SIZE(evpd_handlers); ++p) { | |
| if (cdb[2] == evpd_handlers[p].page) { | |
| buf[1] = cdb[2]; | |
| ret = evpd_handlers[p].emulate(cmd, buf); | |
| goto out; | |
| } | |
| } | |
| pr_err("Unknown VPD Code: 0x%02x\n", cdb[2]); | |
| cmd->scsi_sense_reason = TCM_INVALID_CDB_FIELD; | |
| ret = -EINVAL; | |
| out: | |
| if (buf != map_buf) { | |
| memcpy(map_buf, buf, cmd->data_length); | |
| kfree(buf); | |
| } | |
| transport_kunmap_data_sg(cmd); | |
| if (!ret) { | |
| task->task_scsi_status = GOOD; | |
| transport_complete_task(task, 1); | |
| } | |
| return ret; | |
| } | |
| int target_emulate_readcapacity(struct se_task *task) | |
| { | |
| struct se_cmd *cmd = task->task_se_cmd; | |
| struct se_device *dev = cmd->se_dev; | |
| unsigned char *buf; | |
| unsigned long long blocks_long = dev->transport->get_blocks(dev); | |
| u32 blocks; | |
| if (blocks_long >= 0x00000000ffffffff) | |
| blocks = 0xffffffff; | |
| else | |
| blocks = (u32)blocks_long; | |
| buf = transport_kmap_data_sg(cmd); | |
| buf[0] = (blocks >> 24) & 0xff; | |
| buf[1] = (blocks >> 16) & 0xff; | |
| buf[2] = (blocks >> 8) & 0xff; | |
| buf[3] = blocks & 0xff; | |
| buf[4] = (dev->se_sub_dev->se_dev_attrib.block_size >> 24) & 0xff; | |
| buf[5] = (dev->se_sub_dev->se_dev_attrib.block_size >> 16) & 0xff; | |
| buf[6] = (dev->se_sub_dev->se_dev_attrib.block_size >> 8) & 0xff; | |
| buf[7] = dev->se_sub_dev->se_dev_attrib.block_size & 0xff; | |
| transport_kunmap_data_sg(cmd); | |
| task->task_scsi_status = GOOD; | |
| transport_complete_task(task, 1); | |
| return 0; | |
| } | |
| int target_emulate_readcapacity_16(struct se_task *task) | |
| { | |
| struct se_cmd *cmd = task->task_se_cmd; | |
| struct se_device *dev = cmd->se_dev; | |
| unsigned char *buf; | |
| unsigned long long blocks = dev->transport->get_blocks(dev); | |
| buf = transport_kmap_data_sg(cmd); | |
| buf[0] = (blocks >> 56) & 0xff; | |
| buf[1] = (blocks >> 48) & 0xff; | |
| buf[2] = (blocks >> 40) & 0xff; | |
| buf[3] = (blocks >> 32) & 0xff; | |
| buf[4] = (blocks >> 24) & 0xff; | |
| buf[5] = (blocks >> 16) & 0xff; | |
| buf[6] = (blocks >> 8) & 0xff; | |
| buf[7] = blocks & 0xff; | |
| buf[8] = (dev->se_sub_dev->se_dev_attrib.block_size >> 24) & 0xff; | |
| buf[9] = (dev->se_sub_dev->se_dev_attrib.block_size >> 16) & 0xff; | |
| buf[10] = (dev->se_sub_dev->se_dev_attrib.block_size >> 8) & 0xff; | |
| buf[11] = dev->se_sub_dev->se_dev_attrib.block_size & 0xff; | |
| /* | |
| * Set Thin Provisioning Enable bit following sbc3r22 in section | |
| * READ CAPACITY (16) byte 14 if emulate_tpu or emulate_tpws is enabled. | |
| */ | |
| if (dev->se_sub_dev->se_dev_attrib.emulate_tpu || dev->se_sub_dev->se_dev_attrib.emulate_tpws) | |
| buf[14] = 0x80; | |
| transport_kunmap_data_sg(cmd); | |
| task->task_scsi_status = GOOD; | |
| transport_complete_task(task, 1); | |
| return 0; | |
| } | |
| static int | |
| target_modesense_rwrecovery(unsigned char *p) | |
| { | |
| p[0] = 0x01; | |
| p[1] = 0x0a; | |
| return 12; | |
| } | |
| static int | |
| target_modesense_control(struct se_device *dev, unsigned char *p) | |
| { | |
| p[0] = 0x0a; | |
| p[1] = 0x0a; | |
| p[2] = 2; | |
| /* | |
| * From spc4r23, 7.4.7 Control mode page | |
| * | |
| * The QUEUE ALGORITHM MODIFIER field (see table 368) specifies | |
| * restrictions on the algorithm used for reordering commands | |
| * having the SIMPLE task attribute (see SAM-4). | |
| * | |
| * Table 368 -- QUEUE ALGORITHM MODIFIER field | |
| * Code Description | |
| * 0h Restricted reordering | |
| * 1h Unrestricted reordering allowed | |
| * 2h to 7h Reserved | |
| * 8h to Fh Vendor specific | |
| * | |
| * A value of zero in the QUEUE ALGORITHM MODIFIER field specifies that | |
| * the device server shall order the processing sequence of commands | |
| * having the SIMPLE task attribute such that data integrity is maintained | |
| * for that I_T nexus (i.e., if the transmission of new SCSI transport protocol | |
| * requests is halted at any time, the final value of all data observable | |
| * on the medium shall be the same as if all the commands had been processed | |
| * with the ORDERED task attribute). | |
| * | |
| * A value of one in the QUEUE ALGORITHM MODIFIER field specifies that the | |
| * device server may reorder the processing sequence of commands having the | |
| * SIMPLE task attribute in any manner. Any data integrity exposures related to | |
| * command sequence order shall be explicitly handled by the application client | |
| * through the selection of appropriate ommands and task attributes. | |
| */ | |
| p[3] = (dev->se_sub_dev->se_dev_attrib.emulate_rest_reord == 1) ? 0x00 : 0x10; | |
| /* | |
| * From spc4r17, section 7.4.6 Control mode Page | |
| * | |
| * Unit Attention interlocks control (UN_INTLCK_CTRL) to code 00b | |
| * | |
| * 00b: The logical unit shall clear any unit attention condition | |
| * reported in the same I_T_L_Q nexus transaction as a CHECK CONDITION | |
| * status and shall not establish a unit attention condition when a com- | |
| * mand is completed with BUSY, TASK SET FULL, or RESERVATION CONFLICT | |
| * status. | |
| * | |
| * 10b: The logical unit shall not clear any unit attention condition | |
| * reported in the same I_T_L_Q nexus transaction as a CHECK CONDITION | |
| * status and shall not establish a unit attention condition when | |
| * a command is completed with BUSY, TASK SET FULL, or RESERVATION | |
| * CONFLICT status. | |
| * | |
| * 11b a The logical unit shall not clear any unit attention condition | |
| * reported in the same I_T_L_Q nexus transaction as a CHECK CONDITION | |
| * status and shall establish a unit attention condition for the | |
| * initiator port associated with the I_T nexus on which the BUSY, | |
| * TASK SET FULL, or RESERVATION CONFLICT status is being returned. | |
| * Depending on the status, the additional sense code shall be set to | |
| * PREVIOUS BUSY STATUS, PREVIOUS TASK SET FULL STATUS, or PREVIOUS | |
| * RESERVATION CONFLICT STATUS. Until it is cleared by a REQUEST SENSE | |
| * command, a unit attention condition shall be established only once | |
| * for a BUSY, TASK SET FULL, or RESERVATION CONFLICT status regardless | |
| * to the number of commands completed with one of those status codes. | |
| */ | |
| p[4] = (dev->se_sub_dev->se_dev_attrib.emulate_ua_intlck_ctrl == 2) ? 0x30 : | |
| (dev->se_sub_dev->se_dev_attrib.emulate_ua_intlck_ctrl == 1) ? 0x20 : 0x00; | |
| /* | |
| * From spc4r17, section 7.4.6 Control mode Page | |
| * | |
| * Task Aborted Status (TAS) bit set to zero. | |
| * | |
| * A task aborted status (TAS) bit set to zero specifies that aborted | |
| * tasks shall be terminated by the device server without any response | |
| * to the application client. A TAS bit set to one specifies that tasks | |
| * aborted by the actions of an I_T nexus other than the I_T nexus on | |
| * which the command was received shall be completed with TASK ABORTED | |
| * status (see SAM-4). | |
| */ | |
| p[5] = (dev->se_sub_dev->se_dev_attrib.emulate_tas) ? 0x40 : 0x00; | |
| p[8] = 0xff; | |
| p[9] = 0xff; | |
| p[11] = 30; | |
| return 12; | |
| } | |
| static int | |
| target_modesense_caching(struct se_device *dev, unsigned char *p) | |
| { | |
| p[0] = 0x08; | |
| p[1] = 0x12; | |
| if (dev->se_sub_dev->se_dev_attrib.emulate_write_cache > 0) | |
| p[2] = 0x04; /* Write Cache Enable */ | |
| p[12] = 0x20; /* Disabled Read Ahead */ | |
| return 20; | |
| } | |
| static void | |
| target_modesense_write_protect(unsigned char *buf, int type) | |
| { | |
| /* | |
| * I believe that the WP bit (bit 7) in the mode header is the same for | |
| * all device types.. | |
| */ | |
| switch (type) { | |
| case TYPE_DISK: | |
| case TYPE_TAPE: | |
| default: | |
| buf[0] |= 0x80; /* WP bit */ | |
| break; | |
| } | |
| } | |
| static void | |
| target_modesense_dpofua(unsigned char *buf, int type) | |
| { | |
| switch (type) { | |
| case TYPE_DISK: | |
| buf[0] |= 0x10; /* DPOFUA bit */ | |
| break; | |
| default: | |
| break; | |
| } | |
| } | |
| int target_emulate_modesense(struct se_task *task) | |
| { | |
| struct se_cmd *cmd = task->task_se_cmd; | |
| struct se_device *dev = cmd->se_dev; | |
| char *cdb = cmd->t_task_cdb; | |
| unsigned char *rbuf; | |
| int type = dev->transport->get_device_type(dev); | |
| int ten = (cmd->t_task_cdb[0] == MODE_SENSE_10); | |
| int offset = ten ? 8 : 4; | |
| int length = 0; | |
| unsigned char buf[SE_MODE_PAGE_BUF]; | |
| memset(buf, 0, SE_MODE_PAGE_BUF); | |
| switch (cdb[2] & 0x3f) { | |
| case 0x01: | |
| length = target_modesense_rwrecovery(&buf[offset]); | |
| break; | |
| case 0x08: | |
| length = target_modesense_caching(dev, &buf[offset]); | |
| break; | |
| case 0x0a: | |
| length = target_modesense_control(dev, &buf[offset]); | |
| break; | |
| case 0x3f: | |
| length = target_modesense_rwrecovery(&buf[offset]); | |
| length += target_modesense_caching(dev, &buf[offset+length]); | |
| length += target_modesense_control(dev, &buf[offset+length]); | |
| break; | |
| default: | |
| pr_err("MODE SENSE: unimplemented page/subpage: 0x%02x/0x%02x\n", | |
| cdb[2] & 0x3f, cdb[3]); | |
| cmd->scsi_sense_reason = TCM_UNKNOWN_MODE_PAGE; | |
| return -EINVAL; | |
| } | |
| offset += length; | |
| if (ten) { | |
| offset -= 2; | |
| buf[0] = (offset >> 8) & 0xff; | |
| buf[1] = offset & 0xff; | |
| if ((cmd->se_lun->lun_access & TRANSPORT_LUNFLAGS_READ_ONLY) || | |
| (cmd->se_deve && | |
| (cmd->se_deve->lun_flags & TRANSPORT_LUNFLAGS_READ_ONLY))) | |
| target_modesense_write_protect(&buf[3], type); | |
| if ((dev->se_sub_dev->se_dev_attrib.emulate_write_cache > 0) && | |
| (dev->se_sub_dev->se_dev_attrib.emulate_fua_write > 0)) | |
| target_modesense_dpofua(&buf[3], type); | |
| if ((offset + 2) > cmd->data_length) | |
| offset = cmd->data_length; | |
| } else { | |
| offset -= 1; | |
| buf[0] = offset & 0xff; | |
| if ((cmd->se_lun->lun_access & TRANSPORT_LUNFLAGS_READ_ONLY) || | |
| (cmd->se_deve && | |
| (cmd->se_deve->lun_flags & TRANSPORT_LUNFLAGS_READ_ONLY))) | |
| target_modesense_write_protect(&buf[2], type); | |
| if ((dev->se_sub_dev->se_dev_attrib.emulate_write_cache > 0) && | |
| (dev->se_sub_dev->se_dev_attrib.emulate_fua_write > 0)) | |
| target_modesense_dpofua(&buf[2], type); | |
| if ((offset + 1) > cmd->data_length) | |
| offset = cmd->data_length; | |
| } | |
| rbuf = transport_kmap_data_sg(cmd); | |
| memcpy(rbuf, buf, offset); | |
| transport_kunmap_data_sg(cmd); | |
| task->task_scsi_status = GOOD; | |
| transport_complete_task(task, 1); | |
| return 0; | |
| } | |
| int target_emulate_request_sense(struct se_task *task) | |
| { | |
| struct se_cmd *cmd = task->task_se_cmd; | |
| unsigned char *cdb = cmd->t_task_cdb; | |
| unsigned char *buf; | |
| u8 ua_asc = 0, ua_ascq = 0; | |
| int err = 0; | |
| if (cdb[1] & 0x01) { | |
| pr_err("REQUEST_SENSE description emulation not" | |
| " supported\n"); | |
| cmd->scsi_sense_reason = TCM_INVALID_CDB_FIELD; | |
| return -ENOSYS; | |
| } | |
| buf = transport_kmap_data_sg(cmd); | |
| if (!core_scsi3_ua_clear_for_request_sense(cmd, &ua_asc, &ua_ascq)) { | |
| /* | |
| * CURRENT ERROR, UNIT ATTENTION | |
| */ | |
| buf[0] = 0x70; | |
| buf[SPC_SENSE_KEY_OFFSET] = UNIT_ATTENTION; | |
| if (cmd->data_length < 18) { | |
| buf[7] = 0x00; | |
| err = -EINVAL; | |
| goto end; | |
| } | |
| /* | |
| * The Additional Sense Code (ASC) from the UNIT ATTENTION | |
| */ | |
| buf[SPC_ASC_KEY_OFFSET] = ua_asc; | |
| buf[SPC_ASCQ_KEY_OFFSET] = ua_ascq; | |
| buf[7] = 0x0A; | |
| } else { | |
| /* | |
| * CURRENT ERROR, NO SENSE | |
| */ | |
| buf[0] = 0x70; | |
| buf[SPC_SENSE_KEY_OFFSET] = NO_SENSE; | |
| if (cmd->data_length < 18) { | |
| buf[7] = 0x00; | |
| err = -EINVAL; | |
| goto end; | |
| } | |
| /* | |
| * NO ADDITIONAL SENSE INFORMATION | |
| */ | |
| buf[SPC_ASC_KEY_OFFSET] = 0x00; | |
| buf[7] = 0x0A; | |
| } | |
| end: | |
| transport_kunmap_data_sg(cmd); | |
| task->task_scsi_status = GOOD; | |
| transport_complete_task(task, 1); | |
| return 0; | |
| } | |
| /* | |
| * Used for TCM/IBLOCK and TCM/FILEIO for block/blk-lib.c level discard support. | |
| * Note this is not used for TCM/pSCSI passthrough | |
| */ | |
| int target_emulate_unmap(struct se_task *task) | |
| { | |
| struct se_cmd *cmd = task->task_se_cmd; | |
| struct se_device *dev = cmd->se_dev; | |
| unsigned char *buf, *ptr = NULL; | |
| unsigned char *cdb = &cmd->t_task_cdb[0]; | |
| sector_t lba; | |
| unsigned int size = cmd->data_length, range; | |
| int ret = 0, offset; | |
| unsigned short dl, bd_dl; | |
| if (!dev->transport->do_discard) { | |
| pr_err("UNMAP emulation not supported for: %s\n", | |
| dev->transport->name); | |
| cmd->scsi_sense_reason = TCM_UNSUPPORTED_SCSI_OPCODE; | |
| return -ENOSYS; | |
| } | |
| /* First UNMAP block descriptor starts at 8 byte offset */ | |
| offset = 8; | |
| size -= 8; | |
| dl = get_unaligned_be16(&cdb[0]); | |
| bd_dl = get_unaligned_be16(&cdb[2]); | |
| buf = transport_kmap_data_sg(cmd); | |
| ptr = &buf[offset]; | |
| pr_debug("UNMAP: Sub: %s Using dl: %hu bd_dl: %hu size: %hu" | |
| " ptr: %p\n", dev->transport->name, dl, bd_dl, size, ptr); | |
| while (size) { | |
| lba = get_unaligned_be64(&ptr[0]); | |
| range = get_unaligned_be32(&ptr[8]); | |
| pr_debug("UNMAP: Using lba: %llu and range: %u\n", | |
| (unsigned long long)lba, range); | |
| ret = dev->transport->do_discard(dev, lba, range); | |
| if (ret < 0) { | |
| pr_err("blkdev_issue_discard() failed: %d\n", | |
| ret); | |
| goto err; | |
| } | |
| ptr += 16; | |
| size -= 16; | |
| } | |
| err: | |
| transport_kunmap_data_sg(cmd); | |
| if (!ret) { | |
| task->task_scsi_status = GOOD; | |
| transport_complete_task(task, 1); | |
| } | |
| return ret; | |
| } | |
| /* | |
| * Used for TCM/IBLOCK and TCM/FILEIO for block/blk-lib.c level discard support. | |
| * Note this is not used for TCM/pSCSI passthrough | |
| */ | |
| int target_emulate_write_same(struct se_task *task) | |
| { | |
| struct se_cmd *cmd = task->task_se_cmd; | |
| struct se_device *dev = cmd->se_dev; | |
| sector_t range; | |
| sector_t lba = cmd->t_task_lba; | |
| u32 num_blocks; | |
| int ret; | |
| if (!dev->transport->do_discard) { | |
| pr_err("WRITE_SAME emulation not supported" | |
| " for: %s\n", dev->transport->name); | |
| cmd->scsi_sense_reason = TCM_UNSUPPORTED_SCSI_OPCODE; | |
| return -ENOSYS; | |
| } | |
| if (cmd->t_task_cdb[0] == WRITE_SAME) | |
| num_blocks = get_unaligned_be16(&cmd->t_task_cdb[7]); | |
| else if (cmd->t_task_cdb[0] == WRITE_SAME_16) | |
| num_blocks = get_unaligned_be32(&cmd->t_task_cdb[10]); | |
| else /* WRITE_SAME_32 via VARIABLE_LENGTH_CMD */ | |
| num_blocks = get_unaligned_be32(&cmd->t_task_cdb[28]); | |
| /* | |
| * Use the explicit range when non zero is supplied, otherwise calculate | |
| * the remaining range based on ->get_blocks() - starting LBA. | |
| */ | |
| if (num_blocks != 0) | |
| range = num_blocks; | |
| else | |
| range = (dev->transport->get_blocks(dev) - lba); | |
| pr_debug("WRITE_SAME UNMAP: LBA: %llu Range: %llu\n", | |
| (unsigned long long)lba, (unsigned long long)range); | |
| ret = dev->transport->do_discard(dev, lba, range); | |
| if (ret < 0) { | |
| pr_debug("blkdev_issue_discard() failed for WRITE_SAME\n"); | |
| return ret; | |
| } | |
| task->task_scsi_status = GOOD; | |
| transport_complete_task(task, 1); | |
| return 0; | |
| } | |
| int target_emulate_synchronize_cache(struct se_task *task) | |
| { | |
| struct se_device *dev = task->task_se_cmd->se_dev; | |
| struct se_cmd *cmd = task->task_se_cmd; | |
| if (!dev->transport->do_sync_cache) { | |
| pr_err("SYNCHRONIZE_CACHE emulation not supported" | |
| " for: %s\n", dev->transport->name); | |
| cmd->scsi_sense_reason = TCM_UNSUPPORTED_SCSI_OPCODE; | |
| return -ENOSYS; | |
| } | |
| dev->transport->do_sync_cache(task); | |
| return 0; | |
| } | |
| int target_emulate_noop(struct se_task *task) | |
| { | |
| task->task_scsi_status = GOOD; | |
| transport_complete_task(task, 1); | |
| return 0; | |
| } | |
| /* | |
| * Write a CDB into @cdb that is based on the one the intiator sent us, | |
| * but updated to only cover the sectors that the current task handles. | |
| */ | |
| void target_get_task_cdb(struct se_task *task, unsigned char *cdb) | |
| { | |
| struct se_cmd *cmd = task->task_se_cmd; | |
| unsigned int cdb_len = scsi_command_size(cmd->t_task_cdb); | |
| memcpy(cdb, cmd->t_task_cdb, cdb_len); | |
| if (cmd->se_cmd_flags & SCF_SCSI_DATA_SG_IO_CDB) { | |
| unsigned long long lba = task->task_lba; | |
| u32 sectors = task->task_sectors; | |
| switch (cdb_len) { | |
| case 6: | |
| /* 21-bit LBA and 8-bit sectors */ | |
| cdb[1] = (lba >> 16) & 0x1f; | |
| cdb[2] = (lba >> 8) & 0xff; | |
| cdb[3] = lba & 0xff; | |
| cdb[4] = sectors & 0xff; | |
| break; | |
| case 10: | |
| /* 32-bit LBA and 16-bit sectors */ | |
| put_unaligned_be32(lba, &cdb[2]); | |
| put_unaligned_be16(sectors, &cdb[7]); | |
| break; | |
| case 12: | |
| /* 32-bit LBA and 32-bit sectors */ | |
| put_unaligned_be32(lba, &cdb[2]); | |
| put_unaligned_be32(sectors, &cdb[6]); | |
| break; | |
| case 16: | |
| /* 64-bit LBA and 32-bit sectors */ | |
| put_unaligned_be64(lba, &cdb[2]); | |
| put_unaligned_be32(sectors, &cdb[10]); | |
| break; | |
| case 32: | |
| /* 64-bit LBA and 32-bit sectors, extended CDB */ | |
| put_unaligned_be64(lba, &cdb[12]); | |
| put_unaligned_be32(sectors, &cdb[28]); | |
| break; | |
| default: | |
| BUG(); | |
| } | |
| } | |
| } | |
| EXPORT_SYMBOL(target_get_task_cdb); |