| /* | |
| * Network block device - make block devices work over TCP | |
| * | |
| * Note that you can not swap over this thing, yet. Seems to work but | |
| * deadlocks sometimes - you can not swap over TCP in general. | |
| * | |
| * Copyright 1997-2000, 2008 Pavel Machek <pavel@ucw.cz> | |
| * Parts copyright 2001 Steven Whitehouse <steve@chygwyn.com> | |
| * | |
| * This file is released under GPLv2 or later. | |
| * | |
| * (part of code stolen from loop.c) | |
| */ | |
| #include <linux/major.h> | |
| #include <linux/blkdev.h> | |
| #include <linux/module.h> | |
| #include <linux/init.h> | |
| #include <linux/sched.h> | |
| #include <linux/fs.h> | |
| #include <linux/bio.h> | |
| #include <linux/stat.h> | |
| #include <linux/errno.h> | |
| #include <linux/file.h> | |
| #include <linux/ioctl.h> | |
| #include <linux/mutex.h> | |
| #include <linux/compiler.h> | |
| #include <linux/err.h> | |
| #include <linux/kernel.h> | |
| #include <linux/slab.h> | |
| #include <net/sock.h> | |
| #include <linux/net.h> | |
| #include <linux/kthread.h> | |
| #include <asm/uaccess.h> | |
| #include <asm/types.h> | |
| #include <linux/nbd.h> | |
| #define NBD_MAGIC 0x68797548 | |
| #ifdef NDEBUG | |
| #define dprintk(flags, fmt...) | |
| #else /* NDEBUG */ | |
| #define dprintk(flags, fmt...) do { \ | |
| if (debugflags & (flags)) printk(KERN_DEBUG fmt); \ | |
| } while (0) | |
| #define DBG_IOCTL 0x0004 | |
| #define DBG_INIT 0x0010 | |
| #define DBG_EXIT 0x0020 | |
| #define DBG_BLKDEV 0x0100 | |
| #define DBG_RX 0x0200 | |
| #define DBG_TX 0x0400 | |
| static unsigned int debugflags; | |
| #endif /* NDEBUG */ | |
| static unsigned int nbds_max = 16; | |
| static struct nbd_device *nbd_dev; | |
| static int max_part; | |
| /* | |
| * Use just one lock (or at most 1 per NIC). Two arguments for this: | |
| * 1. Each NIC is essentially a synchronization point for all servers | |
| * accessed through that NIC so there's no need to have more locks | |
| * than NICs anyway. | |
| * 2. More locks lead to more "Dirty cache line bouncing" which will slow | |
| * down each lock to the point where they're actually slower than just | |
| * a single lock. | |
| * Thanks go to Jens Axboe and Al Viro for their LKML emails explaining this! | |
| */ | |
| static DEFINE_SPINLOCK(nbd_lock); | |
| #ifndef NDEBUG | |
| static const char *ioctl_cmd_to_ascii(int cmd) | |
| { | |
| switch (cmd) { | |
| case NBD_SET_SOCK: return "set-sock"; | |
| case NBD_SET_BLKSIZE: return "set-blksize"; | |
| case NBD_SET_SIZE: return "set-size"; | |
| case NBD_DO_IT: return "do-it"; | |
| case NBD_CLEAR_SOCK: return "clear-sock"; | |
| case NBD_CLEAR_QUE: return "clear-que"; | |
| case NBD_PRINT_DEBUG: return "print-debug"; | |
| case NBD_SET_SIZE_BLOCKS: return "set-size-blocks"; | |
| case NBD_DISCONNECT: return "disconnect"; | |
| case BLKROSET: return "set-read-only"; | |
| case BLKFLSBUF: return "flush-buffer-cache"; | |
| } | |
| return "unknown"; | |
| } | |
| static const char *nbdcmd_to_ascii(int cmd) | |
| { | |
| switch (cmd) { | |
| case NBD_CMD_READ: return "read"; | |
| case NBD_CMD_WRITE: return "write"; | |
| case NBD_CMD_DISC: return "disconnect"; | |
| } | |
| return "invalid"; | |
| } | |
| #endif /* NDEBUG */ | |
| static void nbd_end_request(struct request *req) | |
| { | |
| int error = req->errors ? -EIO : 0; | |
| struct request_queue *q = req->q; | |
| unsigned long flags; | |
| dprintk(DBG_BLKDEV, "%s: request %p: %s\n", req->rq_disk->disk_name, | |
| req, error ? "failed" : "done"); | |
| spin_lock_irqsave(q->queue_lock, flags); | |
| __blk_end_request_all(req, error); | |
| spin_unlock_irqrestore(q->queue_lock, flags); | |
| } | |
| static void sock_shutdown(struct nbd_device *nbd, int lock) | |
| { | |
| /* Forcibly shutdown the socket causing all listeners | |
| * to error | |
| * | |
| * FIXME: This code is duplicated from sys_shutdown, but | |
| * there should be a more generic interface rather than | |
| * calling socket ops directly here */ | |
| if (lock) | |
| mutex_lock(&nbd->tx_lock); | |
| if (nbd->sock) { | |
| dev_warn(disk_to_dev(nbd->disk), "shutting down socket\n"); | |
| kernel_sock_shutdown(nbd->sock, SHUT_RDWR); | |
| nbd->sock = NULL; | |
| } | |
| if (lock) | |
| mutex_unlock(&nbd->tx_lock); | |
| } | |
| static void nbd_xmit_timeout(unsigned long arg) | |
| { | |
| struct task_struct *task = (struct task_struct *)arg; | |
| printk(KERN_WARNING "nbd: killing hung xmit (%s, pid: %d)\n", | |
| task->comm, task->pid); | |
| force_sig(SIGKILL, task); | |
| } | |
| /* | |
| * Send or receive packet. | |
| */ | |
| static int sock_xmit(struct nbd_device *nbd, int send, void *buf, int size, | |
| int msg_flags) | |
| { | |
| struct socket *sock = nbd->sock; | |
| int result; | |
| struct msghdr msg; | |
| struct kvec iov; | |
| sigset_t blocked, oldset; | |
| if (unlikely(!sock)) { | |
| dev_err(disk_to_dev(nbd->disk), | |
| "Attempted %s on closed socket in sock_xmit\n", | |
| (send ? "send" : "recv")); | |
| return -EINVAL; | |
| } | |
| /* Allow interception of SIGKILL only | |
| * Don't allow other signals to interrupt the transmission */ | |
| siginitsetinv(&blocked, sigmask(SIGKILL)); | |
| sigprocmask(SIG_SETMASK, &blocked, &oldset); | |
| do { | |
| sock->sk->sk_allocation = GFP_NOIO; | |
| iov.iov_base = buf; | |
| iov.iov_len = size; | |
| msg.msg_name = NULL; | |
| msg.msg_namelen = 0; | |
| msg.msg_control = NULL; | |
| msg.msg_controllen = 0; | |
| msg.msg_flags = msg_flags | MSG_NOSIGNAL; | |
| if (send) { | |
| struct timer_list ti; | |
| if (nbd->xmit_timeout) { | |
| init_timer(&ti); | |
| ti.function = nbd_xmit_timeout; | |
| ti.data = (unsigned long)current; | |
| ti.expires = jiffies + nbd->xmit_timeout; | |
| add_timer(&ti); | |
| } | |
| result = kernel_sendmsg(sock, &msg, &iov, 1, size); | |
| if (nbd->xmit_timeout) | |
| del_timer_sync(&ti); | |
| } else | |
| result = kernel_recvmsg(sock, &msg, &iov, 1, size, | |
| msg.msg_flags); | |
| if (signal_pending(current)) { | |
| siginfo_t info; | |
| printk(KERN_WARNING "nbd (pid %d: %s) got signal %d\n", | |
| task_pid_nr(current), current->comm, | |
| dequeue_signal_lock(current, ¤t->blocked, &info)); | |
| result = -EINTR; | |
| sock_shutdown(nbd, !send); | |
| break; | |
| } | |
| if (result <= 0) { | |
| if (result == 0) | |
| result = -EPIPE; /* short read */ | |
| break; | |
| } | |
| size -= result; | |
| buf += result; | |
| } while (size > 0); | |
| sigprocmask(SIG_SETMASK, &oldset, NULL); | |
| return result; | |
| } | |
| static inline int sock_send_bvec(struct nbd_device *nbd, struct bio_vec *bvec, | |
| int flags) | |
| { | |
| int result; | |
| void *kaddr = kmap(bvec->bv_page); | |
| result = sock_xmit(nbd, 1, kaddr + bvec->bv_offset, | |
| bvec->bv_len, flags); | |
| kunmap(bvec->bv_page); | |
| return result; | |
| } | |
| /* always call with the tx_lock held */ | |
| static int nbd_send_req(struct nbd_device *nbd, struct request *req) | |
| { | |
| int result, flags; | |
| struct nbd_request request; | |
| unsigned long size = blk_rq_bytes(req); | |
| request.magic = htonl(NBD_REQUEST_MAGIC); | |
| request.type = htonl(nbd_cmd(req)); | |
| request.from = cpu_to_be64((u64)blk_rq_pos(req) << 9); | |
| request.len = htonl(size); | |
| memcpy(request.handle, &req, sizeof(req)); | |
| dprintk(DBG_TX, "%s: request %p: sending control (%s@%llu,%uB)\n", | |
| nbd->disk->disk_name, req, | |
| nbdcmd_to_ascii(nbd_cmd(req)), | |
| (unsigned long long)blk_rq_pos(req) << 9, | |
| blk_rq_bytes(req)); | |
| result = sock_xmit(nbd, 1, &request, sizeof(request), | |
| (nbd_cmd(req) == NBD_CMD_WRITE) ? MSG_MORE : 0); | |
| if (result <= 0) { | |
| dev_err(disk_to_dev(nbd->disk), | |
| "Send control failed (result %d)\n", result); | |
| goto error_out; | |
| } | |
| if (nbd_cmd(req) == NBD_CMD_WRITE) { | |
| struct req_iterator iter; | |
| struct bio_vec *bvec; | |
| /* | |
| * we are really probing at internals to determine | |
| * whether to set MSG_MORE or not... | |
| */ | |
| rq_for_each_segment(bvec, req, iter) { | |
| flags = 0; | |
| if (!rq_iter_last(req, iter)) | |
| flags = MSG_MORE; | |
| dprintk(DBG_TX, "%s: request %p: sending %d bytes data\n", | |
| nbd->disk->disk_name, req, bvec->bv_len); | |
| result = sock_send_bvec(nbd, bvec, flags); | |
| if (result <= 0) { | |
| dev_err(disk_to_dev(nbd->disk), | |
| "Send data failed (result %d)\n", | |
| result); | |
| goto error_out; | |
| } | |
| } | |
| } | |
| return 0; | |
| error_out: | |
| return -EIO; | |
| } | |
| static struct request *nbd_find_request(struct nbd_device *nbd, | |
| struct request *xreq) | |
| { | |
| struct request *req, *tmp; | |
| int err; | |
| err = wait_event_interruptible(nbd->active_wq, nbd->active_req != xreq); | |
| if (unlikely(err)) | |
| goto out; | |
| spin_lock(&nbd->queue_lock); | |
| list_for_each_entry_safe(req, tmp, &nbd->queue_head, queuelist) { | |
| if (req != xreq) | |
| continue; | |
| list_del_init(&req->queuelist); | |
| spin_unlock(&nbd->queue_lock); | |
| return req; | |
| } | |
| spin_unlock(&nbd->queue_lock); | |
| err = -ENOENT; | |
| out: | |
| return ERR_PTR(err); | |
| } | |
| static inline int sock_recv_bvec(struct nbd_device *nbd, struct bio_vec *bvec) | |
| { | |
| int result; | |
| void *kaddr = kmap(bvec->bv_page); | |
| result = sock_xmit(nbd, 0, kaddr + bvec->bv_offset, bvec->bv_len, | |
| MSG_WAITALL); | |
| kunmap(bvec->bv_page); | |
| return result; | |
| } | |
| /* NULL returned = something went wrong, inform userspace */ | |
| static struct request *nbd_read_stat(struct nbd_device *nbd) | |
| { | |
| int result; | |
| struct nbd_reply reply; | |
| struct request *req; | |
| reply.magic = 0; | |
| result = sock_xmit(nbd, 0, &reply, sizeof(reply), MSG_WAITALL); | |
| if (result <= 0) { | |
| dev_err(disk_to_dev(nbd->disk), | |
| "Receive control failed (result %d)\n", result); | |
| goto harderror; | |
| } | |
| if (ntohl(reply.magic) != NBD_REPLY_MAGIC) { | |
| dev_err(disk_to_dev(nbd->disk), "Wrong magic (0x%lx)\n", | |
| (unsigned long)ntohl(reply.magic)); | |
| result = -EPROTO; | |
| goto harderror; | |
| } | |
| req = nbd_find_request(nbd, *(struct request **)reply.handle); | |
| if (IS_ERR(req)) { | |
| result = PTR_ERR(req); | |
| if (result != -ENOENT) | |
| goto harderror; | |
| dev_err(disk_to_dev(nbd->disk), "Unexpected reply (%p)\n", | |
| reply.handle); | |
| result = -EBADR; | |
| goto harderror; | |
| } | |
| if (ntohl(reply.error)) { | |
| dev_err(disk_to_dev(nbd->disk), "Other side returned error (%d)\n", | |
| ntohl(reply.error)); | |
| req->errors++; | |
| return req; | |
| } | |
| dprintk(DBG_RX, "%s: request %p: got reply\n", | |
| nbd->disk->disk_name, req); | |
| if (nbd_cmd(req) == NBD_CMD_READ) { | |
| struct req_iterator iter; | |
| struct bio_vec *bvec; | |
| rq_for_each_segment(bvec, req, iter) { | |
| result = sock_recv_bvec(nbd, bvec); | |
| if (result <= 0) { | |
| dev_err(disk_to_dev(nbd->disk), "Receive data failed (result %d)\n", | |
| result); | |
| req->errors++; | |
| return req; | |
| } | |
| dprintk(DBG_RX, "%s: request %p: got %d bytes data\n", | |
| nbd->disk->disk_name, req, bvec->bv_len); | |
| } | |
| } | |
| return req; | |
| harderror: | |
| nbd->harderror = result; | |
| return NULL; | |
| } | |
| static ssize_t pid_show(struct device *dev, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| struct gendisk *disk = dev_to_disk(dev); | |
| return sprintf(buf, "%ld\n", | |
| (long) ((struct nbd_device *)disk->private_data)->pid); | |
| } | |
| static struct device_attribute pid_attr = { | |
| .attr = { .name = "pid", .mode = S_IRUGO}, | |
| .show = pid_show, | |
| }; | |
| static int nbd_do_it(struct nbd_device *nbd) | |
| { | |
| struct request *req; | |
| int ret; | |
| BUG_ON(nbd->magic != NBD_MAGIC); | |
| nbd->pid = task_pid_nr(current); | |
| ret = device_create_file(disk_to_dev(nbd->disk), &pid_attr); | |
| if (ret) { | |
| dev_err(disk_to_dev(nbd->disk), "device_create_file failed!\n"); | |
| nbd->pid = 0; | |
| return ret; | |
| } | |
| while ((req = nbd_read_stat(nbd)) != NULL) | |
| nbd_end_request(req); | |
| device_remove_file(disk_to_dev(nbd->disk), &pid_attr); | |
| nbd->pid = 0; | |
| return 0; | |
| } | |
| static void nbd_clear_que(struct nbd_device *nbd) | |
| { | |
| struct request *req; | |
| BUG_ON(nbd->magic != NBD_MAGIC); | |
| /* | |
| * Because we have set nbd->sock to NULL under the tx_lock, all | |
| * modifications to the list must have completed by now. For | |
| * the same reason, the active_req must be NULL. | |
| * | |
| * As a consequence, we don't need to take the spin lock while | |
| * purging the list here. | |
| */ | |
| BUG_ON(nbd->sock); | |
| BUG_ON(nbd->active_req); | |
| while (!list_empty(&nbd->queue_head)) { | |
| req = list_entry(nbd->queue_head.next, struct request, | |
| queuelist); | |
| list_del_init(&req->queuelist); | |
| req->errors++; | |
| nbd_end_request(req); | |
| } | |
| } | |
| static void nbd_handle_req(struct nbd_device *nbd, struct request *req) | |
| { | |
| if (req->cmd_type != REQ_TYPE_FS) | |
| goto error_out; | |
| nbd_cmd(req) = NBD_CMD_READ; | |
| if (rq_data_dir(req) == WRITE) { | |
| nbd_cmd(req) = NBD_CMD_WRITE; | |
| if (nbd->flags & NBD_READ_ONLY) { | |
| dev_err(disk_to_dev(nbd->disk), | |
| "Write on read-only\n"); | |
| goto error_out; | |
| } | |
| } | |
| req->errors = 0; | |
| mutex_lock(&nbd->tx_lock); | |
| if (unlikely(!nbd->sock)) { | |
| mutex_unlock(&nbd->tx_lock); | |
| dev_err(disk_to_dev(nbd->disk), | |
| "Attempted send on closed socket\n"); | |
| goto error_out; | |
| } | |
| nbd->active_req = req; | |
| if (nbd_send_req(nbd, req) != 0) { | |
| dev_err(disk_to_dev(nbd->disk), "Request send failed\n"); | |
| req->errors++; | |
| nbd_end_request(req); | |
| } else { | |
| spin_lock(&nbd->queue_lock); | |
| list_add(&req->queuelist, &nbd->queue_head); | |
| spin_unlock(&nbd->queue_lock); | |
| } | |
| nbd->active_req = NULL; | |
| mutex_unlock(&nbd->tx_lock); | |
| wake_up_all(&nbd->active_wq); | |
| return; | |
| error_out: | |
| req->errors++; | |
| nbd_end_request(req); | |
| } | |
| static int nbd_thread(void *data) | |
| { | |
| struct nbd_device *nbd = data; | |
| struct request *req; | |
| set_user_nice(current, -20); | |
| while (!kthread_should_stop() || !list_empty(&nbd->waiting_queue)) { | |
| /* wait for something to do */ | |
| wait_event_interruptible(nbd->waiting_wq, | |
| kthread_should_stop() || | |
| !list_empty(&nbd->waiting_queue)); | |
| /* extract request */ | |
| if (list_empty(&nbd->waiting_queue)) | |
| continue; | |
| spin_lock_irq(&nbd->queue_lock); | |
| req = list_entry(nbd->waiting_queue.next, struct request, | |
| queuelist); | |
| list_del_init(&req->queuelist); | |
| spin_unlock_irq(&nbd->queue_lock); | |
| /* handle request */ | |
| nbd_handle_req(nbd, req); | |
| } | |
| return 0; | |
| } | |
| /* | |
| * We always wait for result of write, for now. It would be nice to make it optional | |
| * in future | |
| * if ((rq_data_dir(req) == WRITE) && (nbd->flags & NBD_WRITE_NOCHK)) | |
| * { printk( "Warning: Ignoring result!\n"); nbd_end_request( req ); } | |
| */ | |
| static void do_nbd_request(struct request_queue *q) | |
| { | |
| struct request *req; | |
| while ((req = blk_fetch_request(q)) != NULL) { | |
| struct nbd_device *nbd; | |
| spin_unlock_irq(q->queue_lock); | |
| dprintk(DBG_BLKDEV, "%s: request %p: dequeued (flags=%x)\n", | |
| req->rq_disk->disk_name, req, req->cmd_type); | |
| nbd = req->rq_disk->private_data; | |
| BUG_ON(nbd->magic != NBD_MAGIC); | |
| if (unlikely(!nbd->sock)) { | |
| dev_err(disk_to_dev(nbd->disk), | |
| "Attempted send on closed socket\n"); | |
| req->errors++; | |
| nbd_end_request(req); | |
| spin_lock_irq(q->queue_lock); | |
| continue; | |
| } | |
| spin_lock_irq(&nbd->queue_lock); | |
| list_add_tail(&req->queuelist, &nbd->waiting_queue); | |
| spin_unlock_irq(&nbd->queue_lock); | |
| wake_up(&nbd->waiting_wq); | |
| spin_lock_irq(q->queue_lock); | |
| } | |
| } | |
| /* Must be called with tx_lock held */ | |
| static int __nbd_ioctl(struct block_device *bdev, struct nbd_device *nbd, | |
| unsigned int cmd, unsigned long arg) | |
| { | |
| switch (cmd) { | |
| case NBD_DISCONNECT: { | |
| struct request sreq; | |
| dev_info(disk_to_dev(nbd->disk), "NBD_DISCONNECT\n"); | |
| blk_rq_init(NULL, &sreq); | |
| sreq.cmd_type = REQ_TYPE_SPECIAL; | |
| nbd_cmd(&sreq) = NBD_CMD_DISC; | |
| if (!nbd->sock) | |
| return -EINVAL; | |
| nbd_send_req(nbd, &sreq); | |
| return 0; | |
| } | |
| case NBD_CLEAR_SOCK: { | |
| struct file *file; | |
| nbd->sock = NULL; | |
| file = nbd->file; | |
| nbd->file = NULL; | |
| nbd_clear_que(nbd); | |
| BUG_ON(!list_empty(&nbd->queue_head)); | |
| if (file) | |
| fput(file); | |
| return 0; | |
| } | |
| case NBD_SET_SOCK: { | |
| struct file *file; | |
| if (nbd->file) | |
| return -EBUSY; | |
| file = fget(arg); | |
| if (file) { | |
| struct inode *inode = file->f_path.dentry->d_inode; | |
| if (S_ISSOCK(inode->i_mode)) { | |
| nbd->file = file; | |
| nbd->sock = SOCKET_I(inode); | |
| if (max_part > 0) | |
| bdev->bd_invalidated = 1; | |
| return 0; | |
| } else { | |
| fput(file); | |
| } | |
| } | |
| return -EINVAL; | |
| } | |
| case NBD_SET_BLKSIZE: | |
| nbd->blksize = arg; | |
| nbd->bytesize &= ~(nbd->blksize-1); | |
| bdev->bd_inode->i_size = nbd->bytesize; | |
| set_blocksize(bdev, nbd->blksize); | |
| set_capacity(nbd->disk, nbd->bytesize >> 9); | |
| return 0; | |
| case NBD_SET_SIZE: | |
| nbd->bytesize = arg & ~(nbd->blksize-1); | |
| bdev->bd_inode->i_size = nbd->bytesize; | |
| set_blocksize(bdev, nbd->blksize); | |
| set_capacity(nbd->disk, nbd->bytesize >> 9); | |
| return 0; | |
| case NBD_SET_TIMEOUT: | |
| nbd->xmit_timeout = arg * HZ; | |
| return 0; | |
| case NBD_SET_SIZE_BLOCKS: | |
| nbd->bytesize = ((u64) arg) * nbd->blksize; | |
| bdev->bd_inode->i_size = nbd->bytesize; | |
| set_blocksize(bdev, nbd->blksize); | |
| set_capacity(nbd->disk, nbd->bytesize >> 9); | |
| return 0; | |
| case NBD_DO_IT: { | |
| struct task_struct *thread; | |
| struct file *file; | |
| int error; | |
| if (nbd->pid) | |
| return -EBUSY; | |
| if (!nbd->file) | |
| return -EINVAL; | |
| mutex_unlock(&nbd->tx_lock); | |
| thread = kthread_create(nbd_thread, nbd, nbd->disk->disk_name); | |
| if (IS_ERR(thread)) { | |
| mutex_lock(&nbd->tx_lock); | |
| return PTR_ERR(thread); | |
| } | |
| wake_up_process(thread); | |
| error = nbd_do_it(nbd); | |
| kthread_stop(thread); | |
| mutex_lock(&nbd->tx_lock); | |
| if (error) | |
| return error; | |
| sock_shutdown(nbd, 0); | |
| file = nbd->file; | |
| nbd->file = NULL; | |
| nbd_clear_que(nbd); | |
| dev_warn(disk_to_dev(nbd->disk), "queue cleared\n"); | |
| if (file) | |
| fput(file); | |
| nbd->bytesize = 0; | |
| bdev->bd_inode->i_size = 0; | |
| set_capacity(nbd->disk, 0); | |
| if (max_part > 0) | |
| ioctl_by_bdev(bdev, BLKRRPART, 0); | |
| return nbd->harderror; | |
| } | |
| case NBD_CLEAR_QUE: | |
| /* | |
| * This is for compatibility only. The queue is always cleared | |
| * by NBD_DO_IT or NBD_CLEAR_SOCK. | |
| */ | |
| BUG_ON(!nbd->sock && !list_empty(&nbd->queue_head)); | |
| return 0; | |
| case NBD_PRINT_DEBUG: | |
| dev_info(disk_to_dev(nbd->disk), | |
| "next = %p, prev = %p, head = %p\n", | |
| nbd->queue_head.next, nbd->queue_head.prev, | |
| &nbd->queue_head); | |
| return 0; | |
| } | |
| return -ENOTTY; | |
| } | |
| static int nbd_ioctl(struct block_device *bdev, fmode_t mode, | |
| unsigned int cmd, unsigned long arg) | |
| { | |
| struct nbd_device *nbd = bdev->bd_disk->private_data; | |
| int error; | |
| if (!capable(CAP_SYS_ADMIN)) | |
| return -EPERM; | |
| BUG_ON(nbd->magic != NBD_MAGIC); | |
| /* Anyone capable of this syscall can do *real bad* things */ | |
| dprintk(DBG_IOCTL, "%s: nbd_ioctl cmd=%s(0x%x) arg=%lu\n", | |
| nbd->disk->disk_name, ioctl_cmd_to_ascii(cmd), cmd, arg); | |
| mutex_lock(&nbd->tx_lock); | |
| error = __nbd_ioctl(bdev, nbd, cmd, arg); | |
| mutex_unlock(&nbd->tx_lock); | |
| return error; | |
| } | |
| static const struct block_device_operations nbd_fops = | |
| { | |
| .owner = THIS_MODULE, | |
| .ioctl = nbd_ioctl, | |
| }; | |
| /* | |
| * And here should be modules and kernel interface | |
| * (Just smiley confuses emacs :-) | |
| */ | |
| static int __init nbd_init(void) | |
| { | |
| int err = -ENOMEM; | |
| int i; | |
| int part_shift; | |
| BUILD_BUG_ON(sizeof(struct nbd_request) != 28); | |
| if (max_part < 0) { | |
| printk(KERN_ERR "nbd: max_part must be >= 0\n"); | |
| return -EINVAL; | |
| } | |
| nbd_dev = kcalloc(nbds_max, sizeof(*nbd_dev), GFP_KERNEL); | |
| if (!nbd_dev) | |
| return -ENOMEM; | |
| part_shift = 0; | |
| if (max_part > 0) { | |
| part_shift = fls(max_part); | |
| /* | |
| * Adjust max_part according to part_shift as it is exported | |
| * to user space so that user can know the max number of | |
| * partition kernel should be able to manage. | |
| * | |
| * Note that -1 is required because partition 0 is reserved | |
| * for the whole disk. | |
| */ | |
| max_part = (1UL << part_shift) - 1; | |
| } | |
| if ((1UL << part_shift) > DISK_MAX_PARTS) | |
| return -EINVAL; | |
| if (nbds_max > 1UL << (MINORBITS - part_shift)) | |
| return -EINVAL; | |
| for (i = 0; i < nbds_max; i++) { | |
| struct gendisk *disk = alloc_disk(1 << part_shift); | |
| if (!disk) | |
| goto out; | |
| nbd_dev[i].disk = disk; | |
| /* | |
| * The new linux 2.5 block layer implementation requires | |
| * every gendisk to have its very own request_queue struct. | |
| * These structs are big so we dynamically allocate them. | |
| */ | |
| disk->queue = blk_init_queue(do_nbd_request, &nbd_lock); | |
| if (!disk->queue) { | |
| put_disk(disk); | |
| goto out; | |
| } | |
| /* | |
| * Tell the block layer that we are not a rotational device | |
| */ | |
| queue_flag_set_unlocked(QUEUE_FLAG_NONROT, disk->queue); | |
| } | |
| if (register_blkdev(NBD_MAJOR, "nbd")) { | |
| err = -EIO; | |
| goto out; | |
| } | |
| printk(KERN_INFO "nbd: registered device at major %d\n", NBD_MAJOR); | |
| dprintk(DBG_INIT, "nbd: debugflags=0x%x\n", debugflags); | |
| for (i = 0; i < nbds_max; i++) { | |
| struct gendisk *disk = nbd_dev[i].disk; | |
| nbd_dev[i].file = NULL; | |
| nbd_dev[i].magic = NBD_MAGIC; | |
| nbd_dev[i].flags = 0; | |
| INIT_LIST_HEAD(&nbd_dev[i].waiting_queue); | |
| spin_lock_init(&nbd_dev[i].queue_lock); | |
| INIT_LIST_HEAD(&nbd_dev[i].queue_head); | |
| mutex_init(&nbd_dev[i].tx_lock); | |
| init_waitqueue_head(&nbd_dev[i].active_wq); | |
| init_waitqueue_head(&nbd_dev[i].waiting_wq); | |
| nbd_dev[i].blksize = 1024; | |
| nbd_dev[i].bytesize = 0; | |
| disk->major = NBD_MAJOR; | |
| disk->first_minor = i << part_shift; | |
| disk->fops = &nbd_fops; | |
| disk->private_data = &nbd_dev[i]; | |
| sprintf(disk->disk_name, "nbd%d", i); | |
| set_capacity(disk, 0); | |
| add_disk(disk); | |
| } | |
| return 0; | |
| out: | |
| while (i--) { | |
| blk_cleanup_queue(nbd_dev[i].disk->queue); | |
| put_disk(nbd_dev[i].disk); | |
| } | |
| kfree(nbd_dev); | |
| return err; | |
| } | |
| static void __exit nbd_cleanup(void) | |
| { | |
| int i; | |
| for (i = 0; i < nbds_max; i++) { | |
| struct gendisk *disk = nbd_dev[i].disk; | |
| nbd_dev[i].magic = 0; | |
| if (disk) { | |
| del_gendisk(disk); | |
| blk_cleanup_queue(disk->queue); | |
| put_disk(disk); | |
| } | |
| } | |
| unregister_blkdev(NBD_MAJOR, "nbd"); | |
| kfree(nbd_dev); | |
| printk(KERN_INFO "nbd: unregistered device at major %d\n", NBD_MAJOR); | |
| } | |
| module_init(nbd_init); | |
| module_exit(nbd_cleanup); | |
| MODULE_DESCRIPTION("Network Block Device"); | |
| MODULE_LICENSE("GPL"); | |
| module_param(nbds_max, int, 0444); | |
| MODULE_PARM_DESC(nbds_max, "number of network block devices to initialize (default: 16)"); | |
| module_param(max_part, int, 0444); | |
| MODULE_PARM_DESC(max_part, "number of partitions per device (default: 0)"); | |
| #ifndef NDEBUG | |
| module_param(debugflags, int, 0644); | |
| MODULE_PARM_DESC(debugflags, "flags for controlling debug output"); | |
| #endif |