| /* | |
| * Broadcom specific AMBA | |
| * Broadcom MIPS32 74K core driver | |
| * | |
| * Copyright 2009, Broadcom Corporation | |
| * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de> | |
| * Copyright 2010, Bernhard Loos <bernhardloos@googlemail.com> | |
| * Copyright 2011, Hauke Mehrtens <hauke@hauke-m.de> | |
| * | |
| * Licensed under the GNU/GPL. See COPYING for details. | |
| */ | |
| #include "bcma_private.h" | |
| #include <linux/bcma/bcma.h> | |
| #include <linux/serial.h> | |
| #include <linux/serial_core.h> | |
| #include <linux/serial_reg.h> | |
| #include <linux/time.h> | |
| /* The 47162a0 hangs when reading MIPS DMP registers registers */ | |
| static inline bool bcma_core_mips_bcm47162a0_quirk(struct bcma_device *dev) | |
| { | |
| return dev->bus->chipinfo.id == 47162 && dev->bus->chipinfo.rev == 0 && | |
| dev->id.id == BCMA_CORE_MIPS_74K; | |
| } | |
| /* The 5357b0 hangs when reading USB20H DMP registers */ | |
| static inline bool bcma_core_mips_bcm5357b0_quirk(struct bcma_device *dev) | |
| { | |
| return (dev->bus->chipinfo.id == 0x5357 || | |
| dev->bus->chipinfo.id == 0x4749) && | |
| dev->bus->chipinfo.pkg == 11 && | |
| dev->id.id == BCMA_CORE_USB20_HOST; | |
| } | |
| static inline u32 mips_read32(struct bcma_drv_mips *mcore, | |
| u16 offset) | |
| { | |
| return bcma_read32(mcore->core, offset); | |
| } | |
| static inline void mips_write32(struct bcma_drv_mips *mcore, | |
| u16 offset, | |
| u32 value) | |
| { | |
| bcma_write32(mcore->core, offset, value); | |
| } | |
| static const u32 ipsflag_irq_mask[] = { | |
| 0, | |
| BCMA_MIPS_IPSFLAG_IRQ1, | |
| BCMA_MIPS_IPSFLAG_IRQ2, | |
| BCMA_MIPS_IPSFLAG_IRQ3, | |
| BCMA_MIPS_IPSFLAG_IRQ4, | |
| }; | |
| static const u32 ipsflag_irq_shift[] = { | |
| 0, | |
| BCMA_MIPS_IPSFLAG_IRQ1_SHIFT, | |
| BCMA_MIPS_IPSFLAG_IRQ2_SHIFT, | |
| BCMA_MIPS_IPSFLAG_IRQ3_SHIFT, | |
| BCMA_MIPS_IPSFLAG_IRQ4_SHIFT, | |
| }; | |
| static u32 bcma_core_mips_irqflag(struct bcma_device *dev) | |
| { | |
| u32 flag; | |
| if (bcma_core_mips_bcm47162a0_quirk(dev)) | |
| return dev->core_index; | |
| if (bcma_core_mips_bcm5357b0_quirk(dev)) | |
| return dev->core_index; | |
| flag = bcma_aread32(dev, BCMA_MIPS_OOBSELOUTA30); | |
| return flag & 0x1F; | |
| } | |
| /* Get the MIPS IRQ assignment for a specified device. | |
| * If unassigned, 0 is returned. | |
| */ | |
| unsigned int bcma_core_mips_irq(struct bcma_device *dev) | |
| { | |
| struct bcma_device *mdev = dev->bus->drv_mips.core; | |
| u32 irqflag; | |
| unsigned int irq; | |
| irqflag = bcma_core_mips_irqflag(dev); | |
| for (irq = 1; irq <= 4; irq++) | |
| if (bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq)) & | |
| (1 << irqflag)) | |
| return irq; | |
| return 0; | |
| } | |
| EXPORT_SYMBOL(bcma_core_mips_irq); | |
| static void bcma_core_mips_set_irq(struct bcma_device *dev, unsigned int irq) | |
| { | |
| unsigned int oldirq = bcma_core_mips_irq(dev); | |
| struct bcma_bus *bus = dev->bus; | |
| struct bcma_device *mdev = bus->drv_mips.core; | |
| u32 irqflag; | |
| irqflag = bcma_core_mips_irqflag(dev); | |
| BUG_ON(oldirq == 6); | |
| dev->irq = irq + 2; | |
| /* clear the old irq */ | |
| if (oldirq == 0) | |
| bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0), | |
| bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) & | |
| ~(1 << irqflag)); | |
| else | |
| bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq), 0); | |
| /* assign the new one */ | |
| if (irq == 0) { | |
| bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0), | |
| bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) | | |
| (1 << irqflag)); | |
| } else { | |
| u32 oldirqflag = bcma_read32(mdev, | |
| BCMA_MIPS_MIPS74K_INTMASK(irq)); | |
| if (oldirqflag) { | |
| struct bcma_device *core; | |
| /* backplane irq line is in use, find out who uses | |
| * it and set user to irq 0 | |
| */ | |
| list_for_each_entry_reverse(core, &bus->cores, list) { | |
| if ((1 << bcma_core_mips_irqflag(core)) == | |
| oldirqflag) { | |
| bcma_core_mips_set_irq(core, 0); | |
| break; | |
| } | |
| } | |
| } | |
| bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq), | |
| 1 << irqflag); | |
| } | |
| pr_info("set_irq: core 0x%04x, irq %d => %d\n", | |
| dev->id.id, oldirq + 2, irq + 2); | |
| } | |
| static void bcma_core_mips_print_irq(struct bcma_device *dev, unsigned int irq) | |
| { | |
| int i; | |
| static const char *irq_name[] = {"2(S)", "3", "4", "5", "6", "D", "I"}; | |
| printk(KERN_INFO KBUILD_MODNAME ": core 0x%04x, irq :", dev->id.id); | |
| for (i = 0; i <= 6; i++) | |
| printk(" %s%s", irq_name[i], i == irq ? "*" : " "); | |
| printk("\n"); | |
| } | |
| static void bcma_core_mips_dump_irq(struct bcma_bus *bus) | |
| { | |
| struct bcma_device *core; | |
| list_for_each_entry_reverse(core, &bus->cores, list) { | |
| bcma_core_mips_print_irq(core, bcma_core_mips_irq(core)); | |
| } | |
| } | |
| u32 bcma_cpu_clock(struct bcma_drv_mips *mcore) | |
| { | |
| struct bcma_bus *bus = mcore->core->bus; | |
| if (bus->drv_cc.capabilities & BCMA_CC_CAP_PMU) | |
| return bcma_pmu_get_clockcpu(&bus->drv_cc); | |
| pr_err("No PMU available, need this to get the cpu clock\n"); | |
| return 0; | |
| } | |
| EXPORT_SYMBOL(bcma_cpu_clock); | |
| static void bcma_core_mips_flash_detect(struct bcma_drv_mips *mcore) | |
| { | |
| struct bcma_bus *bus = mcore->core->bus; | |
| switch (bus->drv_cc.capabilities & BCMA_CC_CAP_FLASHT) { | |
| case BCMA_CC_FLASHT_STSER: | |
| case BCMA_CC_FLASHT_ATSER: | |
| pr_err("Serial flash not supported.\n"); | |
| break; | |
| case BCMA_CC_FLASHT_PARA: | |
| pr_info("found parallel flash.\n"); | |
| bus->drv_cc.pflash.window = 0x1c000000; | |
| bus->drv_cc.pflash.window_size = 0x02000000; | |
| if ((bcma_read32(bus->drv_cc.core, BCMA_CC_FLASH_CFG) & | |
| BCMA_CC_FLASH_CFG_DS) == 0) | |
| bus->drv_cc.pflash.buswidth = 1; | |
| else | |
| bus->drv_cc.pflash.buswidth = 2; | |
| break; | |
| default: | |
| pr_err("flash not supported.\n"); | |
| } | |
| } | |
| void bcma_core_mips_init(struct bcma_drv_mips *mcore) | |
| { | |
| struct bcma_bus *bus; | |
| struct bcma_device *core; | |
| bus = mcore->core->bus; | |
| pr_info("Initializing MIPS core...\n"); | |
| if (!mcore->setup_done) | |
| mcore->assigned_irqs = 1; | |
| /* Assign IRQs to all cores on the bus */ | |
| list_for_each_entry_reverse(core, &bus->cores, list) { | |
| int mips_irq; | |
| if (core->irq) | |
| continue; | |
| mips_irq = bcma_core_mips_irq(core); | |
| if (mips_irq > 4) | |
| core->irq = 0; | |
| else | |
| core->irq = mips_irq + 2; | |
| if (core->irq > 5) | |
| continue; | |
| switch (core->id.id) { | |
| case BCMA_CORE_PCI: | |
| case BCMA_CORE_PCIE: | |
| case BCMA_CORE_ETHERNET: | |
| case BCMA_CORE_ETHERNET_GBIT: | |
| case BCMA_CORE_MAC_GBIT: | |
| case BCMA_CORE_80211: | |
| case BCMA_CORE_USB20_HOST: | |
| /* These devices get their own IRQ line if available, | |
| * the rest goes on IRQ0 | |
| */ | |
| if (mcore->assigned_irqs <= 4) | |
| bcma_core_mips_set_irq(core, | |
| mcore->assigned_irqs++); | |
| break; | |
| } | |
| } | |
| pr_info("IRQ reconfiguration done\n"); | |
| bcma_core_mips_dump_irq(bus); | |
| if (mcore->setup_done) | |
| return; | |
| bcma_chipco_serial_init(&bus->drv_cc); | |
| bcma_core_mips_flash_detect(mcore); | |
| mcore->setup_done = true; | |
| } |