| /* Changes made by Lineo Inc. May 2001 | |
| * | |
| * Based on: include/asm-m68knommu/uaccess.h | |
| */ | |
| #ifndef __BLACKFIN_UACCESS_H | |
| #define __BLACKFIN_UACCESS_H | |
| /* | |
| * User space memory access functions | |
| */ | |
| #include <linux/sched.h> | |
| #include <linux/mm.h> | |
| #include <linux/string.h> | |
| #include <asm/segment.h> | |
| #ifdef CONFIG_ACCESS_CHECK | |
| # include <asm/bfin-global.h> | |
| #endif | |
| #define get_ds() (KERNEL_DS) | |
| #define get_fs() (current_thread_info()->addr_limit) | |
| static inline void set_fs(mm_segment_t fs) | |
| { | |
| current_thread_info()->addr_limit = fs; | |
| } | |
| #define segment_eq(a,b) ((a) == (b)) | |
| #define VERIFY_READ 0 | |
| #define VERIFY_WRITE 1 | |
| #define access_ok(type, addr, size) _access_ok((unsigned long)(addr), (size)) | |
| static inline int is_in_rom(unsigned long addr) | |
| { | |
| /* | |
| * What we are really trying to do is determine if addr is | |
| * in an allocated kernel memory region. If not then assume | |
| * we cannot free it or otherwise de-allocate it. Ideally | |
| * we could restrict this to really being in a ROM or flash, | |
| * but that would need to be done on a board by board basis, | |
| * not globally. | |
| */ | |
| if ((addr < _ramstart) || (addr >= _ramend)) | |
| return (1); | |
| /* Default case, not in ROM */ | |
| return (0); | |
| } | |
| /* | |
| * The fs value determines whether argument validity checking should be | |
| * performed or not. If get_fs() == USER_DS, checking is performed, with | |
| * get_fs() == KERNEL_DS, checking is bypassed. | |
| */ | |
| #ifndef CONFIG_ACCESS_CHECK | |
| static inline int _access_ok(unsigned long addr, unsigned long size) { return 1; } | |
| #else | |
| #ifdef CONFIG_ACCESS_OK_L1 | |
| extern int _access_ok(unsigned long addr, unsigned long size)__attribute__((l1_text)); | |
| #else | |
| extern int _access_ok(unsigned long addr, unsigned long size); | |
| #endif | |
| #endif | |
| /* | |
| * The exception table consists of pairs of addresses: the first is the | |
| * address of an instruction that is allowed to fault, and the second is | |
| * the address at which the program should continue. No registers are | |
| * modified, so it is entirely up to the continuation code to figure out | |
| * what to do. | |
| * | |
| * All the routines below use bits of fixup code that are out of line | |
| * with the main instruction path. This means when everything is well, | |
| * we don't even have to jump over them. Further, they do not intrude | |
| * on our cache or tlb entries. | |
| */ | |
| struct exception_table_entry { | |
| unsigned long insn, fixup; | |
| }; | |
| /* Returns 0 if exception not found and fixup otherwise. */ | |
| extern unsigned long search_exception_table(unsigned long); | |
| /* | |
| * These are the main single-value transfer routines. They automatically | |
| * use the right size if we just have the right pointer type. | |
| */ | |
| #define put_user(x,p) \ | |
| ({ \ | |
| int _err = 0; \ | |
| typeof(*(p)) _x = (x); \ | |
| typeof(*(p)) *_p = (p); \ | |
| if (!access_ok(VERIFY_WRITE, _p, sizeof(*(_p)))) {\ | |
| _err = -EFAULT; \ | |
| } \ | |
| else { \ | |
| switch (sizeof (*(_p))) { \ | |
| case 1: \ | |
| __put_user_asm(_x, _p, B); \ | |
| break; \ | |
| case 2: \ | |
| __put_user_asm(_x, _p, W); \ | |
| break; \ | |
| case 4: \ | |
| __put_user_asm(_x, _p, ); \ | |
| break; \ | |
| case 8: { \ | |
| long _xl, _xh; \ | |
| _xl = ((long *)&_x)[0]; \ | |
| _xh = ((long *)&_x)[1]; \ | |
| __put_user_asm(_xl, ((long *)_p)+0, ); \ | |
| __put_user_asm(_xh, ((long *)_p)+1, ); \ | |
| } break; \ | |
| default: \ | |
| _err = __put_user_bad(); \ | |
| break; \ | |
| } \ | |
| } \ | |
| _err; \ | |
| }) | |
| #define __put_user(x,p) put_user(x,p) | |
| static inline int bad_user_access_length(void) | |
| { | |
| panic("bad_user_access_length"); | |
| return -1; | |
| } | |
| #define __put_user_bad() (printk(KERN_INFO "put_user_bad %s:%d %s\n",\ | |
| __FILE__, __LINE__, __func__),\ | |
| bad_user_access_length(), (-EFAULT)) | |
| /* | |
| * Tell gcc we read from memory instead of writing: this is because | |
| * we do not write to any memory gcc knows about, so there are no | |
| * aliasing issues. | |
| */ | |
| #define __ptr(x) ((unsigned long *)(x)) | |
| #define __put_user_asm(x,p,bhw) \ | |
| __asm__ (#bhw"[%1] = %0;\n\t" \ | |
| : /* no outputs */ \ | |
| :"d" (x),"a" (__ptr(p)) : "memory") | |
| #define get_user(x, ptr) \ | |
| ({ \ | |
| int _err = 0; \ | |
| unsigned long _val = 0; \ | |
| const typeof(*(ptr)) __user *_p = (ptr); \ | |
| const size_t ptr_size = sizeof(*(_p)); \ | |
| if (likely(access_ok(VERIFY_READ, _p, ptr_size))) { \ | |
| BUILD_BUG_ON(ptr_size >= 8); \ | |
| switch (ptr_size) { \ | |
| case 1: \ | |
| __get_user_asm(_val, _p, B,(Z)); \ | |
| break; \ | |
| case 2: \ | |
| __get_user_asm(_val, _p, W,(Z)); \ | |
| break; \ | |
| case 4: \ | |
| __get_user_asm(_val, _p, , ); \ | |
| break; \ | |
| } \ | |
| } else \ | |
| _err = -EFAULT; \ | |
| x = (typeof(*(ptr)))_val; \ | |
| _err; \ | |
| }) | |
| #define __get_user(x,p) get_user(x,p) | |
| #define __get_user_bad() (bad_user_access_length(), (-EFAULT)) | |
| #define __get_user_asm(x, ptr, bhw, option) \ | |
| ({ \ | |
| __asm__ __volatile__ ( \ | |
| "%0 =" #bhw "[%1]" #option ";" \ | |
| : "=d" (x) \ | |
| : "a" (__ptr(ptr))); \ | |
| }) | |
| #define __copy_from_user(to, from, n) copy_from_user(to, from, n) | |
| #define __copy_to_user(to, from, n) copy_to_user(to, from, n) | |
| #define __copy_to_user_inatomic __copy_to_user | |
| #define __copy_from_user_inatomic __copy_from_user | |
| #define copy_to_user_ret(to,from,n,retval) ({ if (copy_to_user(to,from,n))\ | |
| return retval; }) | |
| #define copy_from_user_ret(to,from,n,retval) ({ if (copy_from_user(to,from,n))\ | |
| return retval; }) | |
| static inline unsigned long __must_check | |
| copy_from_user(void *to, const void __user *from, unsigned long n) | |
| { | |
| if (access_ok(VERIFY_READ, from, n)) | |
| memcpy(to, from, n); | |
| else | |
| return n; | |
| return 0; | |
| } | |
| static inline unsigned long __must_check | |
| copy_to_user(void *to, const void __user *from, unsigned long n) | |
| { | |
| if (access_ok(VERIFY_WRITE, to, n)) | |
| memcpy(to, from, n); | |
| else | |
| return n; | |
| return 0; | |
| } | |
| /* | |
| * Copy a null terminated string from userspace. | |
| */ | |
| static inline long __must_check | |
| strncpy_from_user(char *dst, const char *src, long count) | |
| { | |
| char *tmp; | |
| if (!access_ok(VERIFY_READ, src, 1)) | |
| return -EFAULT; | |
| strncpy(dst, src, count); | |
| for (tmp = dst; *tmp && count > 0; tmp++, count--) ; | |
| return (tmp - dst); | |
| } | |
| /* | |
| * Return the size of a string (including the ending 0) | |
| * | |
| * Return 0 on exception, a value greater than N if too long | |
| */ | |
| static inline long strnlen_user(const char *src, long n) | |
| { | |
| return (strlen(src) + 1); | |
| } | |
| #define strlen_user(str) strnlen_user(str, 32767) | |
| /* | |
| * Zero Userspace | |
| */ | |
| static inline unsigned long __must_check | |
| __clear_user(void *to, unsigned long n) | |
| { | |
| memset(to, 0, n); | |
| return 0; | |
| } | |
| #define clear_user(to, n) __clear_user(to, n) | |
| #endif /* _BLACKFIN_UACCESS_H */ |