| /* |
| * a3m071 board Device Tree Source |
| * |
| * Copyright 2012 Stefan Roese <sr@denx.de> |
| * |
| * Copyright (C) 2011 DENX Software Engineering GmbH |
| * Heiko Schocher <hs@denx.de> |
| * |
| * Copyright (C) 2007 Semihalf |
| * Marian Balakowicz <m8@semihalf.com> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| |
| /include/ "mpc5200b.dtsi" |
| |
| / { |
| model = "anonymous,a3m071"; |
| compatible = "anonymous,a3m071"; |
| |
| soc5200@f0000000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "fsl,mpc5200b-immr"; |
| ranges = <0 0xf0000000 0x0000c000>; |
| reg = <0xf0000000 0x00000100>; |
| bus-frequency = <0>; /* From boot loader */ |
| system-frequency = <0>; /* From boot loader */ |
| |
| timer@600 { |
| fsl,has-wdt; |
| }; |
| |
| spi@f00 { |
| status = "disabled"; |
| }; |
| |
| usb: usb@1000 { |
| status = "disabled"; |
| }; |
| |
| psc@2000 { |
| compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; |
| reg = <0x2000 0x100>; |
| interrupts = <2 1 0>; |
| }; |
| |
| psc@2200 { |
| status = "disabled"; |
| }; |
| |
| psc@2400 { |
| status = "disabled"; |
| }; |
| |
| psc@2600 { |
| status = "disabled"; |
| }; |
| |
| psc@2800 { |
| status = "disabled"; |
| }; |
| |
| psc@2c00 { // PSC6 |
| compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; |
| reg = <0x2c00 0x100>; |
| interrupts = <2 4 0>; |
| }; |
| |
| ethernet@3000 { |
| phy-handle = <&phy0>; |
| }; |
| |
| mdio@3000 { |
| phy0: ethernet-phy@3 { |
| reg = <0x03>; |
| }; |
| }; |
| |
| ata@3a00 { |
| status = "disabled"; |
| }; |
| |
| i2c@3d00 { |
| status = "disabled"; |
| }; |
| |
| i2c@3d40 { |
| status = "disabled"; |
| }; |
| }; |
| |
| localbus { |
| compatible = "fsl,mpc5200b-lpb","simple-bus"; |
| #address-cells = <2>; |
| #size-cells = <1>; |
| ranges = <0 0 0xfc000000 0x02000000 |
| 3 0 0xe9000000 0x00080000 |
| 5 0 0xe8000000 0x00010000>; |
| |
| flash@0,0 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0 0x0 0x02000000>; |
| compatible = "cfi-flash"; |
| bank-width = <2>; |
| partition@0x0 { |
| label = "u-boot"; |
| reg = <0x00000000 0x00040000>; |
| read-only; |
| }; |
| partition@0x00040000 { |
| label = "env"; |
| reg = <0x00040000 0x00020000>; |
| }; |
| partition@0x00060000 { |
| label = "dtb"; |
| reg = <0x00060000 0x00020000>; |
| }; |
| partition@0x00080000 { |
| label = "kernel"; |
| reg = <0x00080000 0x00500000>; |
| }; |
| partition@0x00580000 { |
| label = "root"; |
| reg = <0x00580000 0x00A80000>; |
| }; |
| }; |
| |
| fpga@3,0 { |
| compatible = "anonymous,a3m071-fpga"; |
| reg = <3 0x0 0x00080000 |
| 5 0x0 0x00010000>; |
| interrupts = <0 0 3>; /* level low */ |
| }; |
| }; |
| |
| pci@f0000d00 { |
| status = "disabled"; |
| }; |
| }; |