| /* | 
 |  *	w1.h | 
 |  * | 
 |  * Copyright (c) 2004 Evgeniy Polyakov <zbr@ioremap.net> | 
 |  * | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify | 
 |  * it under the terms of the GNU General Public License as published by | 
 |  * the Free Software Foundation; either version 2 of the License, or | 
 |  * (at your option) any later version. | 
 |  * | 
 |  * This program is distributed in the hope that it will be useful, | 
 |  * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
 |  * GNU General Public License for more details. | 
 |  * | 
 |  * You should have received a copy of the GNU General Public License | 
 |  * along with this program; if not, write to the Free Software | 
 |  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | 
 |  */ | 
 |  | 
 | #ifndef __W1_H | 
 | #define __W1_H | 
 |  | 
 | struct w1_reg_num | 
 | { | 
 | #if defined(__LITTLE_ENDIAN_BITFIELD) | 
 | 	__u64	family:8, | 
 | 		id:48, | 
 | 		crc:8; | 
 | #elif defined(__BIG_ENDIAN_BITFIELD) | 
 | 	__u64	crc:8, | 
 | 		id:48, | 
 | 		family:8; | 
 | #else | 
 | #error "Please fix <asm/byteorder.h>" | 
 | #endif | 
 | }; | 
 |  | 
 | #ifdef __KERNEL__ | 
 |  | 
 | #include <linux/completion.h> | 
 | #include <linux/device.h> | 
 | #include <linux/mutex.h> | 
 |  | 
 | #include "w1_family.h" | 
 |  | 
 | #define W1_MAXNAMELEN		32 | 
 |  | 
 | #define W1_SEARCH		0xF0 | 
 | #define W1_ALARM_SEARCH		0xEC | 
 | #define W1_CONVERT_TEMP		0x44 | 
 | #define W1_SKIP_ROM		0xCC | 
 | #define W1_READ_SCRATCHPAD	0xBE | 
 | #define W1_READ_ROM		0x33 | 
 | #define W1_READ_PSUPPLY		0xB4 | 
 | #define W1_MATCH_ROM		0x55 | 
 | #define W1_RESUME_CMD		0xA5 | 
 |  | 
 | #define W1_SLAVE_ACTIVE		0 | 
 |  | 
 | struct w1_slave | 
 | { | 
 | 	struct module		*owner; | 
 | 	unsigned char		name[W1_MAXNAMELEN]; | 
 | 	struct list_head	w1_slave_entry; | 
 | 	struct w1_reg_num	reg_num; | 
 | 	atomic_t		refcnt; | 
 | 	u8			rom[9]; | 
 | 	int			ttl; | 
 | 	unsigned long		flags; | 
 |  | 
 | 	struct w1_master	*master; | 
 | 	struct w1_family	*family; | 
 | 	void			*family_data; | 
 | 	struct device		dev; | 
 | 	struct completion	released; | 
 | }; | 
 |  | 
 | typedef void (*w1_slave_found_callback)(struct w1_master *, u64); | 
 |  | 
 |  | 
 | /** | 
 |  * Note: read_bit and write_bit are very low level functions and should only | 
 |  * be used with hardware that doesn't really support 1-wire operations, | 
 |  * like a parallel/serial port. | 
 |  * Either define read_bit and write_bit OR define, at minimum, touch_bit and | 
 |  * reset_bus. | 
 |  */ | 
 | struct w1_bus_master | 
 | { | 
 | 	/** the first parameter in all the functions below */ | 
 | 	void		*data; | 
 |  | 
 | 	/** | 
 | 	 * Sample the line level | 
 | 	 * @return the level read (0 or 1) | 
 | 	 */ | 
 | 	u8		(*read_bit)(void *); | 
 |  | 
 | 	/** Sets the line level */ | 
 | 	void		(*write_bit)(void *, u8); | 
 |  | 
 | 	/** | 
 | 	 * touch_bit is the lowest-level function for devices that really | 
 | 	 * support the 1-wire protocol. | 
 | 	 * touch_bit(0) = write-0 cycle | 
 | 	 * touch_bit(1) = write-1 / read cycle | 
 | 	 * @return the bit read (0 or 1) | 
 | 	 */ | 
 | 	u8		(*touch_bit)(void *, u8); | 
 |  | 
 | 	/** | 
 | 	 * Reads a bytes. Same as 8 touch_bit(1) calls. | 
 | 	 * @return the byte read | 
 | 	 */ | 
 | 	u8		(*read_byte)(void *); | 
 |  | 
 | 	/** | 
 | 	 * Writes a byte. Same as 8 touch_bit(x) calls. | 
 | 	 */ | 
 | 	void		(*write_byte)(void *, u8); | 
 |  | 
 | 	/** | 
 | 	 * Same as a series of read_byte() calls | 
 | 	 * @return the number of bytes read | 
 | 	 */ | 
 | 	u8		(*read_block)(void *, u8 *, int); | 
 |  | 
 | 	/** Same as a series of write_byte() calls */ | 
 | 	void		(*write_block)(void *, const u8 *, int); | 
 |  | 
 | 	/** | 
 | 	 * Combines two reads and a smart write for ROM searches | 
 | 	 * @return bit0=Id bit1=comp_id bit2=dir_taken | 
 | 	 */ | 
 | 	u8		(*triplet)(void *, u8); | 
 |  | 
 | 	/** | 
 | 	 * long write-0 with a read for the presence pulse detection | 
 | 	 * @return -1=Error, 0=Device present, 1=No device present | 
 | 	 */ | 
 | 	u8		(*reset_bus)(void *); | 
 |  | 
 | 	/** | 
 | 	 * Put out a strong pull-up pulse of the specified duration. | 
 | 	 * @return -1=Error, 0=completed | 
 | 	 */ | 
 | 	u8		(*set_pullup)(void *, int); | 
 |  | 
 | 	/** Really nice hardware can handles the different types of ROM search | 
 | 	 *  w1_master* is passed to the slave found callback. | 
 | 	 */ | 
 | 	void		(*search)(void *, struct w1_master *, | 
 | 		u8, w1_slave_found_callback); | 
 | }; | 
 |  | 
 | struct w1_master | 
 | { | 
 | 	struct list_head	w1_master_entry; | 
 | 	struct module		*owner; | 
 | 	unsigned char		name[W1_MAXNAMELEN]; | 
 | 	struct list_head	slist; | 
 | 	int			max_slave_count, slave_count; | 
 | 	unsigned long		attempts; | 
 | 	int			slave_ttl; | 
 | 	int			initialized; | 
 | 	u32			id; | 
 | 	int			search_count; | 
 |  | 
 | 	atomic_t		refcnt; | 
 |  | 
 | 	void			*priv; | 
 | 	int			priv_size; | 
 |  | 
 | 	/** 5V strong pullup enabled flag, 1 enabled, zero disabled. */ | 
 | 	int			enable_pullup; | 
 | 	/** 5V strong pullup duration in milliseconds, zero disabled. */ | 
 | 	int			pullup_duration; | 
 |  | 
 | 	struct task_struct	*thread; | 
 | 	struct mutex		mutex; | 
 | 	struct mutex		bus_mutex; | 
 |  | 
 | 	struct device_driver	*driver; | 
 | 	struct device		dev; | 
 |  | 
 | 	struct w1_bus_master	*bus_master; | 
 |  | 
 | 	u32			seq; | 
 | }; | 
 |  | 
 | int w1_create_master_attributes(struct w1_master *); | 
 | void w1_destroy_master_attributes(struct w1_master *master); | 
 | void w1_search(struct w1_master *dev, u8 search_type, w1_slave_found_callback cb); | 
 | void w1_search_devices(struct w1_master *dev, u8 search_type, w1_slave_found_callback cb); | 
 | struct w1_slave *w1_search_slave(struct w1_reg_num *id); | 
 | void w1_slave_found(struct w1_master *dev, u64 rn); | 
 | void w1_search_process_cb(struct w1_master *dev, u8 search_type, | 
 | 	w1_slave_found_callback cb); | 
 | struct w1_master *w1_search_master_id(u32 id); | 
 |  | 
 | /* Disconnect and reconnect devices in the given family.  Used for finding | 
 |  * unclaimed devices after a family has been registered or releasing devices | 
 |  * after a family has been unregistered.  Set attach to 1 when a new family | 
 |  * has just been registered, to 0 when it has been unregistered. | 
 |  */ | 
 | void w1_reconnect_slaves(struct w1_family *f, int attach); | 
 | void w1_slave_detach(struct w1_slave *sl); | 
 |  | 
 | u8 w1_triplet(struct w1_master *dev, int bdir); | 
 | void w1_write_8(struct w1_master *, u8); | 
 | u8 w1_read_8(struct w1_master *); | 
 | int w1_reset_bus(struct w1_master *); | 
 | u8 w1_calc_crc8(u8 *, int); | 
 | void w1_write_block(struct w1_master *, const u8 *, int); | 
 | void w1_touch_block(struct w1_master *, u8 *, int); | 
 | u8 w1_read_block(struct w1_master *, u8 *, int); | 
 | int w1_reset_select_slave(struct w1_slave *sl); | 
 | int w1_reset_resume_command(struct w1_master *); | 
 | void w1_next_pullup(struct w1_master *, int); | 
 |  | 
 | static inline struct w1_slave* dev_to_w1_slave(struct device *dev) | 
 | { | 
 | 	return container_of(dev, struct w1_slave, dev); | 
 | } | 
 |  | 
 | static inline struct w1_slave* kobj_to_w1_slave(struct kobject *kobj) | 
 | { | 
 | 	return dev_to_w1_slave(container_of(kobj, struct device, kobj)); | 
 | } | 
 |  | 
 | static inline struct w1_master* dev_to_w1_master(struct device *dev) | 
 | { | 
 | 	return container_of(dev, struct w1_master, dev); | 
 | } | 
 |  | 
 | extern struct device_driver w1_master_driver; | 
 | extern struct device w1_master_device; | 
 | extern int w1_max_slave_count; | 
 | extern int w1_max_slave_ttl; | 
 | extern struct list_head w1_masters; | 
 | extern struct mutex w1_mlock; | 
 |  | 
 | extern int w1_process(void *); | 
 |  | 
 | #endif /* __KERNEL__ */ | 
 |  | 
 | #endif /* __W1_H */ |