| /*************************************************************************/ /*! |
| @File |
| @Title RGX power header file |
| @Copyright Copyright (c) Imagination Technologies Ltd. All Rights Reserved |
| @Description Header for the RGX power |
| @License Dual MIT/GPLv2 |
| |
| The contents of this file are subject to the MIT license as set out below. |
| |
| Permission is hereby granted, free of charge, to any person obtaining a copy |
| of this software and associated documentation files (the "Software"), to deal |
| in the Software without restriction, including without limitation the rights |
| to use, copy, modify, merge, publish, distribute, sublicense, and/or sell |
| copies of the Software, and to permit persons to whom the Software is |
| furnished to do so, subject to the following conditions: |
| |
| The above copyright notice and this permission notice shall be included in |
| all copies or substantial portions of the Software. |
| |
| Alternatively, the contents of this file may be used under the terms of |
| the GNU General Public License Version 2 ("GPL") in which case the provisions |
| of GPL are applicable instead of those above. |
| |
| If you wish to allow use of your version of this file only under the terms of |
| GPL, and not to allow others to use your version of this file under the terms |
| of the MIT license, indicate your decision by deleting the provisions above |
| and replace them with the notice and other provisions required by GPL as set |
| out in the file called "GPL-COPYING" included in this distribution. If you do |
| not delete the provisions above, a recipient may use your version of this file |
| under the terms of either the MIT license or GPL. |
| |
| This License is also included in this distribution in the file called |
| "MIT-COPYING". |
| |
| EXCEPT AS OTHERWISE STATED IN A NEGOTIATED AGREEMENT: (A) THE SOFTWARE IS |
| PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING |
| BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR |
| PURPOSE AND NONINFRINGEMENT; AND (B) IN NO EVENT SHALL THE AUTHORS OR |
| COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER |
| IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN |
| CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. |
| */ /**************************************************************************/ |
| |
| #if !defined(__RGXPOWER_H__) |
| #define __RGXPOWER_H__ |
| |
| #include "pvrsrv_error.h" |
| #include "img_types.h" |
| #include "servicesext.h" |
| #include "rgxdevice.h" |
| |
| |
| /*! |
| ****************************************************************************** |
| |
| @Function RGXPrePowerState |
| |
| @Description |
| |
| does necessary preparation before power state transition |
| |
| @Input hDevHandle : RGX Device Node |
| @Input eNewPowerState : New power state |
| @Input eCurrentPowerState : Current power state |
| |
| @Return PVRSRV_ERROR : |
| |
| ******************************************************************************/ |
| PVRSRV_ERROR RGXPrePowerState(IMG_HANDLE hDevHandle, |
| PVRSRV_DEV_POWER_STATE eNewPowerState, |
| PVRSRV_DEV_POWER_STATE eCurrentPowerState, |
| IMG_BOOL bForced); |
| |
| /*! |
| ****************************************************************************** |
| |
| @Function RGXPostPowerState |
| |
| @Description |
| |
| does necessary preparation after power state transition |
| |
| @Input hDevHandle : RGX Device Node |
| @Input eNewPowerState : New power state |
| @Input eCurrentPowerState : Current power state |
| |
| @Return PVRSRV_ERROR : |
| |
| ******************************************************************************/ |
| PVRSRV_ERROR RGXPostPowerState(IMG_HANDLE hDevHandle, |
| PVRSRV_DEV_POWER_STATE eNewPowerState, |
| PVRSRV_DEV_POWER_STATE eCurrentPowerState, |
| IMG_BOOL bForced); |
| |
| |
| /*! |
| ****************************************************************************** |
| |
| @Function RGXPreClockSpeedChange |
| |
| @Description |
| |
| Does processing required before an RGX clock speed change. |
| |
| @Input hDevHandle : RGX Device Node |
| @Input bIdleDevice : Whether the firmware needs to be idled |
| @Input eCurrentPowerState : Power state of the device |
| |
| @Return PVRSRV_ERROR : |
| |
| ******************************************************************************/ |
| PVRSRV_ERROR RGXPreClockSpeedChange(IMG_HANDLE hDevHandle, |
| PVRSRV_DEV_POWER_STATE eCurrentPowerState); |
| |
| /*! |
| ****************************************************************************** |
| |
| @Function RGXPostClockSpeedChange |
| |
| @Description |
| |
| Does processing required after an RGX clock speed change. |
| |
| @Input hDevHandle : RGX Device Node |
| @Input bIdleDevice : Whether the firmware had been idled previously |
| @Input eCurrentPowerState : Power state of the device |
| |
| @Return PVRSRV_ERROR : |
| |
| ******************************************************************************/ |
| PVRSRV_ERROR RGXPostClockSpeedChange(IMG_HANDLE hDevHandle, |
| PVRSRV_DEV_POWER_STATE eCurrentPowerState); |
| |
| |
| /*! |
| ****************************************************************************** |
| |
| @Function RGXDustCountChange |
| |
| @Description Change of number of DUSTs |
| |
| @Input hDevHandle : RGX Device Node |
| @Input ui32NumberOfDusts : Number of DUSTs to make transition to |
| |
| @Return PVRSRV_ERROR : |
| |
| ******************************************************************************/ |
| PVRSRV_ERROR RGXDustCountChange(IMG_HANDLE hDevHandle, |
| IMG_UINT32 ui32NumberOfDusts); |
| |
| /*! |
| ****************************************************************************** |
| |
| @Function RGXAPMLatencyChange |
| |
| @Description |
| |
| Changes the wait duration used before firmware indicates IDLE. |
| Reducing this value will cause the firmware to shut off faster and |
| more often but may increase bubbles in GPU scheduling due to the added |
| power management activity. If bPersistent is NOT set, APM latency will |
| return back to system default on power up. |
| |
| @Input hDevHandle : RGX Device Node |
| @Input ui32ActivePMLatencyms : Number of milliseconds to wait |
| @Input bPersistent : Set to ensure new value is not reset |
| |
| @Return PVRSRV_ERROR : |
| |
| ******************************************************************************/ |
| PVRSRV_ERROR RGXAPMLatencyChange(IMG_HANDLE hDevHandle, |
| IMG_UINT32 ui32ActivePMLatencyms, |
| IMG_BOOL bActivePMLatencyPersistant); |
| |
| /*! |
| ****************************************************************************** |
| |
| @Function RGXActivePowerRequest |
| |
| @Description Initiate a handshake with the FW to power off the GPU |
| |
| @Input hDevHandle : RGX Device Node |
| |
| @Return PVRSRV_ERROR : |
| |
| ******************************************************************************/ |
| PVRSRV_ERROR RGXActivePowerRequest(IMG_HANDLE hDevHandle); |
| |
| /*! |
| ****************************************************************************** |
| |
| @Function RGXForcedIdleRequest |
| |
| @Description Initiate a handshake with the FW to idle the GPU |
| |
| @Input hDevHandle : RGX Device Node |
| |
| @Return PVRSRV_ERROR : |
| |
| ******************************************************************************/ |
| PVRSRV_ERROR RGXForcedIdleRequest(IMG_HANDLE hDevHandle, IMG_BOOL bDeviceOffPermitted); |
| |
| /*! |
| ****************************************************************************** |
| |
| @Function RGXCancelForcedIdleRequest |
| |
| @Description Send a request to cancel idle to the firmware. |
| |
| @Input hDevHandle : RGX Device Node |
| |
| @Return PVRSRV_ERROR : |
| |
| ******************************************************************************/ |
| PVRSRV_ERROR RGXCancelForcedIdleRequest(IMG_HANDLE hDevHandle); |
| |
| /*! |
| ****************************************************************************** |
| |
| @Function PVRSRVGetNextDustCount |
| |
| @Description |
| |
| Calculate a sequence of dust counts to achieve full transition coverage. |
| We increment two counts of dusts and switch up and down between them. |
| It does contain a few redundant transitions. If two dust exist, the |
| output transitions should be as follows. |
| |
| 0->1, 0<-1, 0->2, 0<-2, (0->1) |
| 1->1, 1->2, 1<-2, (1->2) |
| 2->2, (2->0), |
| 0->0. Repeat. |
| |
| Redundant transitions in brackets. |
| |
| @Input psDustReqState : Counter state used to calculate next dust count |
| @Input ui32DustCount : Number of dusts in the core |
| |
| @Return PVRSRV_ERROR |
| |
| ******************************************************************************/ |
| IMG_UINT32 RGXGetNextDustCount(RGX_DUST_STATE *psDustState, IMG_UINT32 ui32DustCount); |
| |
| |
| #endif /* __RGXPOWER_H__ */ |