| /* |
| * Generic HDLC support routines for Linux |
| * X.25 support |
| * |
| * Copyright (C) 1999 - 2006 Krzysztof Halasa <khc@pm.waw.pl> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of version 2 of the GNU General Public License |
| * as published by the Free Software Foundation. |
| */ |
| |
| #include <linux/errno.h> |
| #include <linux/hdlc.h> |
| #include <linux/if_arp.h> |
| #include <linux/inetdevice.h> |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/lapb.h> |
| #include <linux/module.h> |
| #include <linux/pkt_sched.h> |
| #include <linux/poll.h> |
| #include <linux/rtnetlink.h> |
| #include <linux/skbuff.h> |
| #include <linux/slab.h> |
| #include <net/x25device.h> |
| |
| static int x25_ioctl(struct net_device *dev, struct ifreq *ifr); |
| |
| /* These functions are callbacks called by LAPB layer */ |
| |
| static void x25_connect_disconnect(struct net_device *dev, int reason, int code) |
| { |
| struct sk_buff *skb; |
| unsigned char *ptr; |
| |
| if ((skb = dev_alloc_skb(1)) == NULL) { |
| printk(KERN_ERR "%s: out of memory\n", dev->name); |
| return; |
| } |
| |
| ptr = skb_put(skb, 1); |
| *ptr = code; |
| |
| skb->protocol = x25_type_trans(skb, dev); |
| netif_rx(skb); |
| } |
| |
| |
| |
| static void x25_connected(struct net_device *dev, int reason) |
| { |
| x25_connect_disconnect(dev, reason, 1); |
| } |
| |
| |
| |
| static void x25_disconnected(struct net_device *dev, int reason) |
| { |
| x25_connect_disconnect(dev, reason, 2); |
| } |
| |
| |
| |
| static int x25_data_indication(struct net_device *dev, struct sk_buff *skb) |
| { |
| unsigned char *ptr; |
| |
| skb_push(skb, 1); |
| |
| if (skb_cow(skb, 1)) |
| return NET_RX_DROP; |
| |
| ptr = skb->data; |
| *ptr = 0; |
| |
| skb->protocol = x25_type_trans(skb, dev); |
| return netif_rx(skb); |
| } |
| |
| |
| |
| static void x25_data_transmit(struct net_device *dev, struct sk_buff *skb) |
| { |
| hdlc_device *hdlc = dev_to_hdlc(dev); |
| hdlc->xmit(skb, dev); /* Ignore return value :-( */ |
| } |
| |
| |
| |
| static netdev_tx_t x25_xmit(struct sk_buff *skb, struct net_device *dev) |
| { |
| int result; |
| |
| |
| /* X.25 to LAPB */ |
| switch (skb->data[0]) { |
| case 0: /* Data to be transmitted */ |
| skb_pull(skb, 1); |
| if ((result = lapb_data_request(dev, skb)) != LAPB_OK) |
| dev_kfree_skb(skb); |
| return NETDEV_TX_OK; |
| |
| case 1: |
| if ((result = lapb_connect_request(dev))!= LAPB_OK) { |
| if (result == LAPB_CONNECTED) |
| /* Send connect confirm. msg to level 3 */ |
| x25_connected(dev, 0); |
| else |
| printk(KERN_ERR "%s: LAPB connect request " |
| "failed, error code = %i\n", |
| dev->name, result); |
| } |
| break; |
| |
| case 2: |
| if ((result = lapb_disconnect_request(dev)) != LAPB_OK) { |
| if (result == LAPB_NOTCONNECTED) |
| /* Send disconnect confirm. msg to level 3 */ |
| x25_disconnected(dev, 0); |
| else |
| printk(KERN_ERR "%s: LAPB disconnect request " |
| "failed, error code = %i\n", |
| dev->name, result); |
| } |
| break; |
| |
| default: /* to be defined */ |
| break; |
| } |
| |
| dev_kfree_skb(skb); |
| return NETDEV_TX_OK; |
| } |
| |
| |
| |
| static int x25_open(struct net_device *dev) |
| { |
| struct lapb_register_struct cb; |
| int result; |
| |
| cb.connect_confirmation = x25_connected; |
| cb.connect_indication = x25_connected; |
| cb.disconnect_confirmation = x25_disconnected; |
| cb.disconnect_indication = x25_disconnected; |
| cb.data_indication = x25_data_indication; |
| cb.data_transmit = x25_data_transmit; |
| |
| result = lapb_register(dev, &cb); |
| if (result != LAPB_OK) |
| return result; |
| return 0; |
| } |
| |
| |
| |
| static void x25_close(struct net_device *dev) |
| { |
| lapb_unregister(dev); |
| } |
| |
| |
| |
| static int x25_rx(struct sk_buff *skb) |
| { |
| struct net_device *dev = skb->dev; |
| |
| if ((skb = skb_share_check(skb, GFP_ATOMIC)) == NULL) { |
| dev->stats.rx_dropped++; |
| return NET_RX_DROP; |
| } |
| |
| if (lapb_data_received(dev, skb) == LAPB_OK) |
| return NET_RX_SUCCESS; |
| |
| dev->stats.rx_errors++; |
| dev_kfree_skb_any(skb); |
| return NET_RX_DROP; |
| } |
| |
| |
| static struct hdlc_proto proto = { |
| .open = x25_open, |
| .close = x25_close, |
| .ioctl = x25_ioctl, |
| .netif_rx = x25_rx, |
| .xmit = x25_xmit, |
| .module = THIS_MODULE, |
| }; |
| |
| |
| static int x25_ioctl(struct net_device *dev, struct ifreq *ifr) |
| { |
| hdlc_device *hdlc = dev_to_hdlc(dev); |
| int result; |
| |
| switch (ifr->ifr_settings.type) { |
| case IF_GET_PROTO: |
| if (dev_to_hdlc(dev)->proto != &proto) |
| return -EINVAL; |
| ifr->ifr_settings.type = IF_PROTO_X25; |
| return 0; /* return protocol only, no settable parameters */ |
| |
| case IF_PROTO_X25: |
| if (!capable(CAP_NET_ADMIN)) |
| return -EPERM; |
| |
| if (dev->flags & IFF_UP) |
| return -EBUSY; |
| |
| result=hdlc->attach(dev, ENCODING_NRZ,PARITY_CRC16_PR1_CCITT); |
| if (result) |
| return result; |
| |
| if ((result = attach_hdlc_protocol(dev, &proto, 0))) |
| return result; |
| dev->type = ARPHRD_X25; |
| netif_dormant_off(dev); |
| return 0; |
| } |
| |
| return -EINVAL; |
| } |
| |
| |
| static int __init mod_init(void) |
| { |
| register_hdlc_protocol(&proto); |
| return 0; |
| } |
| |
| |
| |
| static void __exit mod_exit(void) |
| { |
| unregister_hdlc_protocol(&proto); |
| } |
| |
| |
| module_init(mod_init); |
| module_exit(mod_exit); |
| |
| MODULE_AUTHOR("Krzysztof Halasa <khc@pm.waw.pl>"); |
| MODULE_DESCRIPTION("X.25 protocol support for generic HDLC"); |
| MODULE_LICENSE("GPL v2"); |