| /* | |
| * Copyright (C) 2010 Google, Inc. | |
| * | |
| * Author: | |
| * Erik Gilling <konkers@google.com> | |
| * Benoit Goby <benoit@android.com> | |
| * | |
| * This software is licensed under the terms of the GNU General Public | |
| * License version 2, as published by the Free Software Foundation, and | |
| * may be copied, distributed, and modified under those terms. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| */ | |
| #include <linux/resource.h> | |
| #include <linux/delay.h> | |
| #include <linux/slab.h> | |
| #include <linux/err.h> | |
| #include <linux/export.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/io.h> | |
| #include <linux/gpio.h> | |
| #include <linux/of.h> | |
| #include <linux/of_gpio.h> | |
| #include <linux/usb/otg.h> | |
| #include <linux/usb/ulpi.h> | |
| #include <asm/mach-types.h> | |
| #include <linux/usb/tegra_usb_phy.h> | |
| #define TEGRA_USB_BASE 0xC5000000 | |
| #define TEGRA_USB_SIZE SZ_16K | |
| #define ULPI_VIEWPORT 0x170 | |
| #define USB_SUSP_CTRL 0x400 | |
| #define USB_WAKE_ON_CNNT_EN_DEV (1 << 3) | |
| #define USB_WAKE_ON_DISCON_EN_DEV (1 << 4) | |
| #define USB_SUSP_CLR (1 << 5) | |
| #define USB_PHY_CLK_VALID (1 << 7) | |
| #define UTMIP_RESET (1 << 11) | |
| #define UHSIC_RESET (1 << 11) | |
| #define UTMIP_PHY_ENABLE (1 << 12) | |
| #define ULPI_PHY_ENABLE (1 << 13) | |
| #define USB_SUSP_SET (1 << 14) | |
| #define USB_WAKEUP_DEBOUNCE_COUNT(x) (((x) & 0x7) << 16) | |
| #define USB1_LEGACY_CTRL 0x410 | |
| #define USB1_NO_LEGACY_MODE (1 << 0) | |
| #define USB1_VBUS_SENSE_CTL_MASK (3 << 1) | |
| #define USB1_VBUS_SENSE_CTL_VBUS_WAKEUP (0 << 1) | |
| #define USB1_VBUS_SENSE_CTL_AB_SESS_VLD_OR_VBUS_WAKEUP \ | |
| (1 << 1) | |
| #define USB1_VBUS_SENSE_CTL_AB_SESS_VLD (2 << 1) | |
| #define USB1_VBUS_SENSE_CTL_A_SESS_VLD (3 << 1) | |
| #define ULPI_TIMING_CTRL_0 0x424 | |
| #define ULPI_OUTPUT_PINMUX_BYP (1 << 10) | |
| #define ULPI_CLKOUT_PINMUX_BYP (1 << 11) | |
| #define ULPI_TIMING_CTRL_1 0x428 | |
| #define ULPI_DATA_TRIMMER_LOAD (1 << 0) | |
| #define ULPI_DATA_TRIMMER_SEL(x) (((x) & 0x7) << 1) | |
| #define ULPI_STPDIRNXT_TRIMMER_LOAD (1 << 16) | |
| #define ULPI_STPDIRNXT_TRIMMER_SEL(x) (((x) & 0x7) << 17) | |
| #define ULPI_DIR_TRIMMER_LOAD (1 << 24) | |
| #define ULPI_DIR_TRIMMER_SEL(x) (((x) & 0x7) << 25) | |
| #define UTMIP_PLL_CFG1 0x804 | |
| #define UTMIP_XTAL_FREQ_COUNT(x) (((x) & 0xfff) << 0) | |
| #define UTMIP_PLLU_ENABLE_DLY_COUNT(x) (((x) & 0x1f) << 27) | |
| #define UTMIP_XCVR_CFG0 0x808 | |
| #define UTMIP_XCVR_SETUP(x) (((x) & 0xf) << 0) | |
| #define UTMIP_XCVR_LSRSLEW(x) (((x) & 0x3) << 8) | |
| #define UTMIP_XCVR_LSFSLEW(x) (((x) & 0x3) << 10) | |
| #define UTMIP_FORCE_PD_POWERDOWN (1 << 14) | |
| #define UTMIP_FORCE_PD2_POWERDOWN (1 << 16) | |
| #define UTMIP_FORCE_PDZI_POWERDOWN (1 << 18) | |
| #define UTMIP_XCVR_HSSLEW_MSB(x) (((x) & 0x7f) << 25) | |
| #define UTMIP_BIAS_CFG0 0x80c | |
| #define UTMIP_OTGPD (1 << 11) | |
| #define UTMIP_BIASPD (1 << 10) | |
| #define UTMIP_HSRX_CFG0 0x810 | |
| #define UTMIP_ELASTIC_LIMIT(x) (((x) & 0x1f) << 10) | |
| #define UTMIP_IDLE_WAIT(x) (((x) & 0x1f) << 15) | |
| #define UTMIP_HSRX_CFG1 0x814 | |
| #define UTMIP_HS_SYNC_START_DLY(x) (((x) & 0x1f) << 1) | |
| #define UTMIP_TX_CFG0 0x820 | |
| #define UTMIP_FS_PREABMLE_J (1 << 19) | |
| #define UTMIP_HS_DISCON_DISABLE (1 << 8) | |
| #define UTMIP_MISC_CFG0 0x824 | |
| #define UTMIP_DPDM_OBSERVE (1 << 26) | |
| #define UTMIP_DPDM_OBSERVE_SEL(x) (((x) & 0xf) << 27) | |
| #define UTMIP_DPDM_OBSERVE_SEL_FS_J UTMIP_DPDM_OBSERVE_SEL(0xf) | |
| #define UTMIP_DPDM_OBSERVE_SEL_FS_K UTMIP_DPDM_OBSERVE_SEL(0xe) | |
| #define UTMIP_DPDM_OBSERVE_SEL_FS_SE1 UTMIP_DPDM_OBSERVE_SEL(0xd) | |
| #define UTMIP_DPDM_OBSERVE_SEL_FS_SE0 UTMIP_DPDM_OBSERVE_SEL(0xc) | |
| #define UTMIP_SUSPEND_EXIT_ON_EDGE (1 << 22) | |
| #define UTMIP_MISC_CFG1 0x828 | |
| #define UTMIP_PLL_ACTIVE_DLY_COUNT(x) (((x) & 0x1f) << 18) | |
| #define UTMIP_PLLU_STABLE_COUNT(x) (((x) & 0xfff) << 6) | |
| #define UTMIP_DEBOUNCE_CFG0 0x82c | |
| #define UTMIP_BIAS_DEBOUNCE_A(x) (((x) & 0xffff) << 0) | |
| #define UTMIP_BAT_CHRG_CFG0 0x830 | |
| #define UTMIP_PD_CHRG (1 << 0) | |
| #define UTMIP_SPARE_CFG0 0x834 | |
| #define FUSE_SETUP_SEL (1 << 3) | |
| #define UTMIP_XCVR_CFG1 0x838 | |
| #define UTMIP_FORCE_PDDISC_POWERDOWN (1 << 0) | |
| #define UTMIP_FORCE_PDCHRP_POWERDOWN (1 << 2) | |
| #define UTMIP_FORCE_PDDR_POWERDOWN (1 << 4) | |
| #define UTMIP_XCVR_TERM_RANGE_ADJ(x) (((x) & 0xf) << 18) | |
| #define UTMIP_BIAS_CFG1 0x83c | |
| #define UTMIP_BIAS_PDTRK_COUNT(x) (((x) & 0x1f) << 3) | |
| static DEFINE_SPINLOCK(utmip_pad_lock); | |
| static int utmip_pad_count; | |
| struct tegra_xtal_freq { | |
| int freq; | |
| u8 enable_delay; | |
| u8 stable_count; | |
| u8 active_delay; | |
| u8 xtal_freq_count; | |
| u16 debounce; | |
| }; | |
| static const struct tegra_xtal_freq tegra_freq_table[] = { | |
| { | |
| .freq = 12000000, | |
| .enable_delay = 0x02, | |
| .stable_count = 0x2F, | |
| .active_delay = 0x04, | |
| .xtal_freq_count = 0x76, | |
| .debounce = 0x7530, | |
| }, | |
| { | |
| .freq = 13000000, | |
| .enable_delay = 0x02, | |
| .stable_count = 0x33, | |
| .active_delay = 0x05, | |
| .xtal_freq_count = 0x7F, | |
| .debounce = 0x7EF4, | |
| }, | |
| { | |
| .freq = 19200000, | |
| .enable_delay = 0x03, | |
| .stable_count = 0x4B, | |
| .active_delay = 0x06, | |
| .xtal_freq_count = 0xBB, | |
| .debounce = 0xBB80, | |
| }, | |
| { | |
| .freq = 26000000, | |
| .enable_delay = 0x04, | |
| .stable_count = 0x66, | |
| .active_delay = 0x09, | |
| .xtal_freq_count = 0xFE, | |
| .debounce = 0xFDE8, | |
| }, | |
| }; | |
| static struct tegra_utmip_config utmip_default[] = { | |
| [0] = { | |
| .hssync_start_delay = 9, | |
| .idle_wait_delay = 17, | |
| .elastic_limit = 16, | |
| .term_range_adj = 6, | |
| .xcvr_setup = 9, | |
| .xcvr_lsfslew = 1, | |
| .xcvr_lsrslew = 1, | |
| }, | |
| [2] = { | |
| .hssync_start_delay = 9, | |
| .idle_wait_delay = 17, | |
| .elastic_limit = 16, | |
| .term_range_adj = 6, | |
| .xcvr_setup = 9, | |
| .xcvr_lsfslew = 2, | |
| .xcvr_lsrslew = 2, | |
| }, | |
| }; | |
| static int utmip_pad_open(struct tegra_usb_phy *phy) | |
| { | |
| phy->pad_clk = clk_get_sys("utmip-pad", NULL); | |
| if (IS_ERR(phy->pad_clk)) { | |
| pr_err("%s: can't get utmip pad clock\n", __func__); | |
| return PTR_ERR(phy->pad_clk); | |
| } | |
| if (phy->is_legacy_phy) { | |
| phy->pad_regs = phy->regs; | |
| } else { | |
| phy->pad_regs = ioremap(TEGRA_USB_BASE, TEGRA_USB_SIZE); | |
| if (!phy->pad_regs) { | |
| pr_err("%s: can't remap usb registers\n", __func__); | |
| clk_put(phy->pad_clk); | |
| return -ENOMEM; | |
| } | |
| } | |
| return 0; | |
| } | |
| static void utmip_pad_close(struct tegra_usb_phy *phy) | |
| { | |
| if (!phy->is_legacy_phy) | |
| iounmap(phy->pad_regs); | |
| clk_put(phy->pad_clk); | |
| } | |
| static void utmip_pad_power_on(struct tegra_usb_phy *phy) | |
| { | |
| unsigned long val, flags; | |
| void __iomem *base = phy->pad_regs; | |
| clk_prepare_enable(phy->pad_clk); | |
| spin_lock_irqsave(&utmip_pad_lock, flags); | |
| if (utmip_pad_count++ == 0) { | |
| val = readl(base + UTMIP_BIAS_CFG0); | |
| val &= ~(UTMIP_OTGPD | UTMIP_BIASPD); | |
| writel(val, base + UTMIP_BIAS_CFG0); | |
| } | |
| spin_unlock_irqrestore(&utmip_pad_lock, flags); | |
| clk_disable_unprepare(phy->pad_clk); | |
| } | |
| static int utmip_pad_power_off(struct tegra_usb_phy *phy) | |
| { | |
| unsigned long val, flags; | |
| void __iomem *base = phy->pad_regs; | |
| if (!utmip_pad_count) { | |
| pr_err("%s: utmip pad already powered off\n", __func__); | |
| return -EINVAL; | |
| } | |
| clk_prepare_enable(phy->pad_clk); | |
| spin_lock_irqsave(&utmip_pad_lock, flags); | |
| if (--utmip_pad_count == 0) { | |
| val = readl(base + UTMIP_BIAS_CFG0); | |
| val |= UTMIP_OTGPD | UTMIP_BIASPD; | |
| writel(val, base + UTMIP_BIAS_CFG0); | |
| } | |
| spin_unlock_irqrestore(&utmip_pad_lock, flags); | |
| clk_disable_unprepare(phy->pad_clk); | |
| return 0; | |
| } | |
| static int utmi_wait_register(void __iomem *reg, u32 mask, u32 result) | |
| { | |
| unsigned long timeout = 2000; | |
| do { | |
| if ((readl(reg) & mask) == result) | |
| return 0; | |
| udelay(1); | |
| timeout--; | |
| } while (timeout); | |
| return -1; | |
| } | |
| static void utmi_phy_clk_disable(struct tegra_usb_phy *phy) | |
| { | |
| unsigned long val; | |
| void __iomem *base = phy->regs; | |
| if (phy->is_legacy_phy) { | |
| val = readl(base + USB_SUSP_CTRL); | |
| val |= USB_SUSP_SET; | |
| writel(val, base + USB_SUSP_CTRL); | |
| udelay(10); | |
| val = readl(base + USB_SUSP_CTRL); | |
| val &= ~USB_SUSP_SET; | |
| writel(val, base + USB_SUSP_CTRL); | |
| } else | |
| tegra_ehci_set_phcd(&phy->u_phy, true); | |
| if (utmi_wait_register(base + USB_SUSP_CTRL, USB_PHY_CLK_VALID, 0) < 0) | |
| pr_err("%s: timeout waiting for phy to stabilize\n", __func__); | |
| } | |
| static void utmi_phy_clk_enable(struct tegra_usb_phy *phy) | |
| { | |
| unsigned long val; | |
| void __iomem *base = phy->regs; | |
| if (phy->is_legacy_phy) { | |
| val = readl(base + USB_SUSP_CTRL); | |
| val |= USB_SUSP_CLR; | |
| writel(val, base + USB_SUSP_CTRL); | |
| udelay(10); | |
| val = readl(base + USB_SUSP_CTRL); | |
| val &= ~USB_SUSP_CLR; | |
| writel(val, base + USB_SUSP_CTRL); | |
| } else | |
| tegra_ehci_set_phcd(&phy->u_phy, false); | |
| if (utmi_wait_register(base + USB_SUSP_CTRL, USB_PHY_CLK_VALID, | |
| USB_PHY_CLK_VALID)) | |
| pr_err("%s: timeout waiting for phy to stabilize\n", __func__); | |
| } | |
| static int utmi_phy_power_on(struct tegra_usb_phy *phy) | |
| { | |
| unsigned long val; | |
| void __iomem *base = phy->regs; | |
| struct tegra_utmip_config *config = phy->config; | |
| val = readl(base + USB_SUSP_CTRL); | |
| val |= UTMIP_RESET; | |
| writel(val, base + USB_SUSP_CTRL); | |
| if (phy->is_legacy_phy) { | |
| val = readl(base + USB1_LEGACY_CTRL); | |
| val |= USB1_NO_LEGACY_MODE; | |
| writel(val, base + USB1_LEGACY_CTRL); | |
| } | |
| val = readl(base + UTMIP_TX_CFG0); | |
| val &= ~UTMIP_FS_PREABMLE_J; | |
| writel(val, base + UTMIP_TX_CFG0); | |
| val = readl(base + UTMIP_HSRX_CFG0); | |
| val &= ~(UTMIP_IDLE_WAIT(~0) | UTMIP_ELASTIC_LIMIT(~0)); | |
| val |= UTMIP_IDLE_WAIT(config->idle_wait_delay); | |
| val |= UTMIP_ELASTIC_LIMIT(config->elastic_limit); | |
| writel(val, base + UTMIP_HSRX_CFG0); | |
| val = readl(base + UTMIP_HSRX_CFG1); | |
| val &= ~UTMIP_HS_SYNC_START_DLY(~0); | |
| val |= UTMIP_HS_SYNC_START_DLY(config->hssync_start_delay); | |
| writel(val, base + UTMIP_HSRX_CFG1); | |
| val = readl(base + UTMIP_DEBOUNCE_CFG0); | |
| val &= ~UTMIP_BIAS_DEBOUNCE_A(~0); | |
| val |= UTMIP_BIAS_DEBOUNCE_A(phy->freq->debounce); | |
| writel(val, base + UTMIP_DEBOUNCE_CFG0); | |
| val = readl(base + UTMIP_MISC_CFG0); | |
| val &= ~UTMIP_SUSPEND_EXIT_ON_EDGE; | |
| writel(val, base + UTMIP_MISC_CFG0); | |
| val = readl(base + UTMIP_MISC_CFG1); | |
| val &= ~(UTMIP_PLL_ACTIVE_DLY_COUNT(~0) | UTMIP_PLLU_STABLE_COUNT(~0)); | |
| val |= UTMIP_PLL_ACTIVE_DLY_COUNT(phy->freq->active_delay) | | |
| UTMIP_PLLU_STABLE_COUNT(phy->freq->stable_count); | |
| writel(val, base + UTMIP_MISC_CFG1); | |
| val = readl(base + UTMIP_PLL_CFG1); | |
| val &= ~(UTMIP_XTAL_FREQ_COUNT(~0) | UTMIP_PLLU_ENABLE_DLY_COUNT(~0)); | |
| val |= UTMIP_XTAL_FREQ_COUNT(phy->freq->xtal_freq_count) | | |
| UTMIP_PLLU_ENABLE_DLY_COUNT(phy->freq->enable_delay); | |
| writel(val, base + UTMIP_PLL_CFG1); | |
| if (phy->mode == TEGRA_USB_PHY_MODE_DEVICE) { | |
| val = readl(base + USB_SUSP_CTRL); | |
| val &= ~(USB_WAKE_ON_CNNT_EN_DEV | USB_WAKE_ON_DISCON_EN_DEV); | |
| writel(val, base + USB_SUSP_CTRL); | |
| } | |
| utmip_pad_power_on(phy); | |
| val = readl(base + UTMIP_XCVR_CFG0); | |
| val &= ~(UTMIP_FORCE_PD_POWERDOWN | UTMIP_FORCE_PD2_POWERDOWN | | |
| UTMIP_FORCE_PDZI_POWERDOWN | UTMIP_XCVR_SETUP(~0) | | |
| UTMIP_XCVR_LSFSLEW(~0) | UTMIP_XCVR_LSRSLEW(~0) | | |
| UTMIP_XCVR_HSSLEW_MSB(~0)); | |
| val |= UTMIP_XCVR_SETUP(config->xcvr_setup); | |
| val |= UTMIP_XCVR_LSFSLEW(config->xcvr_lsfslew); | |
| val |= UTMIP_XCVR_LSRSLEW(config->xcvr_lsrslew); | |
| writel(val, base + UTMIP_XCVR_CFG0); | |
| val = readl(base + UTMIP_XCVR_CFG1); | |
| val &= ~(UTMIP_FORCE_PDDISC_POWERDOWN | UTMIP_FORCE_PDCHRP_POWERDOWN | | |
| UTMIP_FORCE_PDDR_POWERDOWN | UTMIP_XCVR_TERM_RANGE_ADJ(~0)); | |
| val |= UTMIP_XCVR_TERM_RANGE_ADJ(config->term_range_adj); | |
| writel(val, base + UTMIP_XCVR_CFG1); | |
| val = readl(base + UTMIP_BAT_CHRG_CFG0); | |
| val &= ~UTMIP_PD_CHRG; | |
| writel(val, base + UTMIP_BAT_CHRG_CFG0); | |
| val = readl(base + UTMIP_BIAS_CFG1); | |
| val &= ~UTMIP_BIAS_PDTRK_COUNT(~0); | |
| val |= UTMIP_BIAS_PDTRK_COUNT(0x5); | |
| writel(val, base + UTMIP_BIAS_CFG1); | |
| if (phy->is_legacy_phy) { | |
| val = readl(base + UTMIP_SPARE_CFG0); | |
| if (phy->mode == TEGRA_USB_PHY_MODE_DEVICE) | |
| val &= ~FUSE_SETUP_SEL; | |
| else | |
| val |= FUSE_SETUP_SEL; | |
| writel(val, base + UTMIP_SPARE_CFG0); | |
| } else { | |
| val = readl(base + USB_SUSP_CTRL); | |
| val |= UTMIP_PHY_ENABLE; | |
| writel(val, base + USB_SUSP_CTRL); | |
| } | |
| val = readl(base + USB_SUSP_CTRL); | |
| val &= ~UTMIP_RESET; | |
| writel(val, base + USB_SUSP_CTRL); | |
| if (phy->is_legacy_phy) { | |
| val = readl(base + USB1_LEGACY_CTRL); | |
| val &= ~USB1_VBUS_SENSE_CTL_MASK; | |
| val |= USB1_VBUS_SENSE_CTL_A_SESS_VLD; | |
| writel(val, base + USB1_LEGACY_CTRL); | |
| val = readl(base + USB_SUSP_CTRL); | |
| val &= ~USB_SUSP_SET; | |
| writel(val, base + USB_SUSP_CTRL); | |
| } | |
| utmi_phy_clk_enable(phy); | |
| if (!phy->is_legacy_phy) | |
| tegra_ehci_set_pts(&phy->u_phy, 0); | |
| return 0; | |
| } | |
| static int utmi_phy_power_off(struct tegra_usb_phy *phy) | |
| { | |
| unsigned long val; | |
| void __iomem *base = phy->regs; | |
| utmi_phy_clk_disable(phy); | |
| if (phy->mode == TEGRA_USB_PHY_MODE_DEVICE) { | |
| val = readl(base + USB_SUSP_CTRL); | |
| val &= ~USB_WAKEUP_DEBOUNCE_COUNT(~0); | |
| val |= USB_WAKE_ON_CNNT_EN_DEV | USB_WAKEUP_DEBOUNCE_COUNT(5); | |
| writel(val, base + USB_SUSP_CTRL); | |
| } | |
| val = readl(base + USB_SUSP_CTRL); | |
| val |= UTMIP_RESET; | |
| writel(val, base + USB_SUSP_CTRL); | |
| val = readl(base + UTMIP_BAT_CHRG_CFG0); | |
| val |= UTMIP_PD_CHRG; | |
| writel(val, base + UTMIP_BAT_CHRG_CFG0); | |
| val = readl(base + UTMIP_XCVR_CFG0); | |
| val |= UTMIP_FORCE_PD_POWERDOWN | UTMIP_FORCE_PD2_POWERDOWN | | |
| UTMIP_FORCE_PDZI_POWERDOWN; | |
| writel(val, base + UTMIP_XCVR_CFG0); | |
| val = readl(base + UTMIP_XCVR_CFG1); | |
| val |= UTMIP_FORCE_PDDISC_POWERDOWN | UTMIP_FORCE_PDCHRP_POWERDOWN | | |
| UTMIP_FORCE_PDDR_POWERDOWN; | |
| writel(val, base + UTMIP_XCVR_CFG1); | |
| return utmip_pad_power_off(phy); | |
| } | |
| static void utmi_phy_preresume(struct tegra_usb_phy *phy) | |
| { | |
| unsigned long val; | |
| void __iomem *base = phy->regs; | |
| val = readl(base + UTMIP_TX_CFG0); | |
| val |= UTMIP_HS_DISCON_DISABLE; | |
| writel(val, base + UTMIP_TX_CFG0); | |
| } | |
| static void utmi_phy_postresume(struct tegra_usb_phy *phy) | |
| { | |
| unsigned long val; | |
| void __iomem *base = phy->regs; | |
| val = readl(base + UTMIP_TX_CFG0); | |
| val &= ~UTMIP_HS_DISCON_DISABLE; | |
| writel(val, base + UTMIP_TX_CFG0); | |
| } | |
| static void utmi_phy_restore_start(struct tegra_usb_phy *phy, | |
| enum tegra_usb_phy_port_speed port_speed) | |
| { | |
| unsigned long val; | |
| void __iomem *base = phy->regs; | |
| val = readl(base + UTMIP_MISC_CFG0); | |
| val &= ~UTMIP_DPDM_OBSERVE_SEL(~0); | |
| if (port_speed == TEGRA_USB_PHY_PORT_SPEED_LOW) | |
| val |= UTMIP_DPDM_OBSERVE_SEL_FS_K; | |
| else | |
| val |= UTMIP_DPDM_OBSERVE_SEL_FS_J; | |
| writel(val, base + UTMIP_MISC_CFG0); | |
| udelay(1); | |
| val = readl(base + UTMIP_MISC_CFG0); | |
| val |= UTMIP_DPDM_OBSERVE; | |
| writel(val, base + UTMIP_MISC_CFG0); | |
| udelay(10); | |
| } | |
| static void utmi_phy_restore_end(struct tegra_usb_phy *phy) | |
| { | |
| unsigned long val; | |
| void __iomem *base = phy->regs; | |
| val = readl(base + UTMIP_MISC_CFG0); | |
| val &= ~UTMIP_DPDM_OBSERVE; | |
| writel(val, base + UTMIP_MISC_CFG0); | |
| udelay(10); | |
| } | |
| static int ulpi_phy_power_on(struct tegra_usb_phy *phy) | |
| { | |
| int ret; | |
| unsigned long val; | |
| void __iomem *base = phy->regs; | |
| struct tegra_ulpi_config *config = phy->config; | |
| gpio_direction_output(config->reset_gpio, 0); | |
| msleep(5); | |
| gpio_direction_output(config->reset_gpio, 1); | |
| clk_prepare_enable(phy->clk); | |
| msleep(1); | |
| val = readl(base + USB_SUSP_CTRL); | |
| val |= UHSIC_RESET; | |
| writel(val, base + USB_SUSP_CTRL); | |
| val = readl(base + ULPI_TIMING_CTRL_0); | |
| val |= ULPI_OUTPUT_PINMUX_BYP | ULPI_CLKOUT_PINMUX_BYP; | |
| writel(val, base + ULPI_TIMING_CTRL_0); | |
| val = readl(base + USB_SUSP_CTRL); | |
| val |= ULPI_PHY_ENABLE; | |
| writel(val, base + USB_SUSP_CTRL); | |
| val = 0; | |
| writel(val, base + ULPI_TIMING_CTRL_1); | |
| val |= ULPI_DATA_TRIMMER_SEL(4); | |
| val |= ULPI_STPDIRNXT_TRIMMER_SEL(4); | |
| val |= ULPI_DIR_TRIMMER_SEL(4); | |
| writel(val, base + ULPI_TIMING_CTRL_1); | |
| udelay(10); | |
| val |= ULPI_DATA_TRIMMER_LOAD; | |
| val |= ULPI_STPDIRNXT_TRIMMER_LOAD; | |
| val |= ULPI_DIR_TRIMMER_LOAD; | |
| writel(val, base + ULPI_TIMING_CTRL_1); | |
| /* Fix VbusInvalid due to floating VBUS */ | |
| ret = usb_phy_io_write(phy->ulpi, 0x40, 0x08); | |
| if (ret) { | |
| pr_err("%s: ulpi write failed\n", __func__); | |
| return ret; | |
| } | |
| ret = usb_phy_io_write(phy->ulpi, 0x80, 0x0B); | |
| if (ret) { | |
| pr_err("%s: ulpi write failed\n", __func__); | |
| return ret; | |
| } | |
| val = readl(base + USB_SUSP_CTRL); | |
| val |= USB_SUSP_CLR; | |
| writel(val, base + USB_SUSP_CTRL); | |
| udelay(100); | |
| val = readl(base + USB_SUSP_CTRL); | |
| val &= ~USB_SUSP_CLR; | |
| writel(val, base + USB_SUSP_CTRL); | |
| return 0; | |
| } | |
| static int ulpi_phy_power_off(struct tegra_usb_phy *phy) | |
| { | |
| struct tegra_ulpi_config *config = phy->config; | |
| clk_disable(phy->clk); | |
| return gpio_direction_output(config->reset_gpio, 0); | |
| } | |
| static int tegra_phy_init(struct usb_phy *x) | |
| { | |
| struct tegra_usb_phy *phy = container_of(x, struct tegra_usb_phy, u_phy); | |
| struct tegra_ulpi_config *ulpi_config; | |
| int err; | |
| if (phy->is_ulpi_phy) { | |
| ulpi_config = phy->config; | |
| phy->clk = clk_get_sys(NULL, ulpi_config->clk); | |
| if (IS_ERR(phy->clk)) { | |
| pr_err("%s: can't get ulpi clock\n", __func__); | |
| err = -ENXIO; | |
| goto err1; | |
| } | |
| if (!gpio_is_valid(ulpi_config->reset_gpio)) | |
| ulpi_config->reset_gpio = | |
| of_get_named_gpio(phy->dev->of_node, | |
| "nvidia,phy-reset-gpio", 0); | |
| if (!gpio_is_valid(ulpi_config->reset_gpio)) { | |
| pr_err("%s: invalid reset gpio: %d\n", __func__, | |
| ulpi_config->reset_gpio); | |
| err = -EINVAL; | |
| goto err1; | |
| } | |
| gpio_request(ulpi_config->reset_gpio, "ulpi_phy_reset_b"); | |
| gpio_direction_output(ulpi_config->reset_gpio, 0); | |
| phy->ulpi = otg_ulpi_create(&ulpi_viewport_access_ops, 0); | |
| phy->ulpi->io_priv = phy->regs + ULPI_VIEWPORT; | |
| } else { | |
| err = utmip_pad_open(phy); | |
| if (err < 0) | |
| goto err1; | |
| } | |
| return 0; | |
| err1: | |
| clk_disable_unprepare(phy->pll_u); | |
| clk_put(phy->pll_u); | |
| return err; | |
| } | |
| static void tegra_usb_phy_close(struct usb_phy *x) | |
| { | |
| struct tegra_usb_phy *phy = container_of(x, struct tegra_usb_phy, u_phy); | |
| if (phy->is_ulpi_phy) | |
| clk_put(phy->clk); | |
| else | |
| utmip_pad_close(phy); | |
| clk_disable_unprepare(phy->pll_u); | |
| clk_put(phy->pll_u); | |
| kfree(phy); | |
| } | |
| static int tegra_usb_phy_power_on(struct tegra_usb_phy *phy) | |
| { | |
| if (phy->is_ulpi_phy) | |
| return ulpi_phy_power_on(phy); | |
| else | |
| return utmi_phy_power_on(phy); | |
| } | |
| static int tegra_usb_phy_power_off(struct tegra_usb_phy *phy) | |
| { | |
| if (phy->is_ulpi_phy) | |
| return ulpi_phy_power_off(phy); | |
| else | |
| return utmi_phy_power_off(phy); | |
| } | |
| static int tegra_usb_phy_suspend(struct usb_phy *x, int suspend) | |
| { | |
| struct tegra_usb_phy *phy = container_of(x, struct tegra_usb_phy, u_phy); | |
| if (suspend) | |
| return tegra_usb_phy_power_off(phy); | |
| else | |
| return tegra_usb_phy_power_on(phy); | |
| } | |
| struct tegra_usb_phy *tegra_usb_phy_open(struct device *dev, int instance, | |
| void __iomem *regs, void *config, enum tegra_usb_phy_mode phy_mode) | |
| { | |
| struct tegra_usb_phy *phy; | |
| unsigned long parent_rate; | |
| int i; | |
| int err; | |
| struct device_node *np = dev->of_node; | |
| phy = kzalloc(sizeof(struct tegra_usb_phy), GFP_KERNEL); | |
| if (!phy) | |
| return ERR_PTR(-ENOMEM); | |
| phy->instance = instance; | |
| phy->regs = regs; | |
| phy->config = config; | |
| phy->mode = phy_mode; | |
| phy->dev = dev; | |
| phy->is_legacy_phy = | |
| of_property_read_bool(np, "nvidia,has-legacy-mode"); | |
| err = of_property_match_string(np, "phy_type", "ulpi"); | |
| if (err < 0) | |
| phy->is_ulpi_phy = false; | |
| else | |
| phy->is_ulpi_phy = true; | |
| if (!phy->config) { | |
| if (phy->is_ulpi_phy) { | |
| pr_err("%s: ulpi phy configuration missing", __func__); | |
| err = -EINVAL; | |
| goto err0; | |
| } else { | |
| phy->config = &utmip_default[instance]; | |
| } | |
| } | |
| phy->pll_u = clk_get_sys(NULL, "pll_u"); | |
| if (IS_ERR(phy->pll_u)) { | |
| pr_err("Can't get pll_u clock\n"); | |
| err = PTR_ERR(phy->pll_u); | |
| goto err0; | |
| } | |
| clk_prepare_enable(phy->pll_u); | |
| parent_rate = clk_get_rate(clk_get_parent(phy->pll_u)); | |
| for (i = 0; i < ARRAY_SIZE(tegra_freq_table); i++) { | |
| if (tegra_freq_table[i].freq == parent_rate) { | |
| phy->freq = &tegra_freq_table[i]; | |
| break; | |
| } | |
| } | |
| if (!phy->freq) { | |
| pr_err("invalid pll_u parent rate %ld\n", parent_rate); | |
| err = -EINVAL; | |
| goto err1; | |
| } | |
| phy->u_phy.init = tegra_phy_init; | |
| phy->u_phy.shutdown = tegra_usb_phy_close; | |
| phy->u_phy.set_suspend = tegra_usb_phy_suspend; | |
| return phy; | |
| err1: | |
| clk_disable_unprepare(phy->pll_u); | |
| clk_put(phy->pll_u); | |
| err0: | |
| kfree(phy); | |
| return ERR_PTR(err); | |
| } | |
| EXPORT_SYMBOL_GPL(tegra_usb_phy_open); | |
| void tegra_usb_phy_preresume(struct usb_phy *x) | |
| { | |
| struct tegra_usb_phy *phy = container_of(x, struct tegra_usb_phy, u_phy); | |
| if (!phy->is_ulpi_phy) | |
| utmi_phy_preresume(phy); | |
| } | |
| EXPORT_SYMBOL_GPL(tegra_usb_phy_preresume); | |
| void tegra_usb_phy_postresume(struct usb_phy *x) | |
| { | |
| struct tegra_usb_phy *phy = container_of(x, struct tegra_usb_phy, u_phy); | |
| if (!phy->is_ulpi_phy) | |
| utmi_phy_postresume(phy); | |
| } | |
| EXPORT_SYMBOL_GPL(tegra_usb_phy_postresume); | |
| void tegra_ehci_phy_restore_start(struct usb_phy *x, | |
| enum tegra_usb_phy_port_speed port_speed) | |
| { | |
| struct tegra_usb_phy *phy = container_of(x, struct tegra_usb_phy, u_phy); | |
| if (!phy->is_ulpi_phy) | |
| utmi_phy_restore_start(phy, port_speed); | |
| } | |
| EXPORT_SYMBOL_GPL(tegra_ehci_phy_restore_start); | |
| void tegra_ehci_phy_restore_end(struct usb_phy *x) | |
| { | |
| struct tegra_usb_phy *phy = container_of(x, struct tegra_usb_phy, u_phy); | |
| if (!phy->is_ulpi_phy) | |
| utmi_phy_restore_end(phy); | |
| } | |
| EXPORT_SYMBOL_GPL(tegra_ehci_phy_restore_end); | |