| #!/bin/bash |
| # SPDX-License-Identifier: GPL-2.0 |
| |
| # This test is for checking IPv4 and IPv6 FIB rules API |
| |
| ret=0 |
| |
| PAUSE_ON_FAIL=${PAUSE_ON_FAIL:=no} |
| IP="ip -netns testns" |
| |
| RTABLE=100 |
| GW_IP4=192.51.100.2 |
| SRC_IP=192.51.100.3 |
| GW_IP6=2001:db8:1::2 |
| SRC_IP6=2001:db8:1::3 |
| |
| DEV_ADDR=192.51.100.1 |
| DEV_ADDR6=2001:db8:1::1 |
| DEV=dummy0 |
| |
| log_test() |
| { |
| local rc=$1 |
| local expected=$2 |
| local msg="$3" |
| |
| if [ ${rc} -eq ${expected} ]; then |
| nsuccess=$((nsuccess+1)) |
| printf "\n TEST: %-50s [ OK ]\n" "${msg}" |
| else |
| ret=1 |
| nfail=$((nfail+1)) |
| printf "\n TEST: %-50s [FAIL]\n" "${msg}" |
| if [ "${PAUSE_ON_FAIL}" = "yes" ]; then |
| echo |
| echo "hit enter to continue, 'q' to quit" |
| read a |
| [ "$a" = "q" ] && exit 1 |
| fi |
| fi |
| } |
| |
| log_section() |
| { |
| echo |
| echo "######################################################################" |
| echo "TEST SECTION: $*" |
| echo "######################################################################" |
| } |
| |
| setup() |
| { |
| set -e |
| ip netns add testns |
| $IP link set dev lo up |
| |
| $IP link add dummy0 type dummy |
| $IP link set dev dummy0 up |
| $IP address add $DEV_ADDR/24 dev dummy0 |
| $IP -6 address add $DEV_ADDR6/64 dev dummy0 |
| |
| set +e |
| } |
| |
| cleanup() |
| { |
| $IP link del dev dummy0 &> /dev/null |
| ip netns del testns |
| } |
| |
| fib_check_iproute_support() |
| { |
| ip rule help 2>&1 | grep -q $1 |
| if [ $? -ne 0 ]; then |
| echo "SKIP: iproute2 iprule too old, missing $1 match" |
| return 1 |
| fi |
| |
| ip route get help 2>&1 | grep -q $2 |
| if [ $? -ne 0 ]; then |
| echo "SKIP: iproute2 get route too old, missing $2 match" |
| return 1 |
| fi |
| |
| return 0 |
| } |
| |
| fib_rule6_del() |
| { |
| $IP -6 rule del $1 |
| log_test $? 0 "rule6 del $1" |
| } |
| |
| fib_rule6_del_by_pref() |
| { |
| pref=$($IP -6 rule show | grep "$1 lookup $TABLE" | cut -d ":" -f 1) |
| $IP -6 rule del pref $pref |
| } |
| |
| fib_rule6_test_match_n_redirect() |
| { |
| local match="$1" |
| local getmatch="$2" |
| |
| $IP -6 rule add $match table $RTABLE |
| $IP -6 route get $GW_IP6 $getmatch | grep -q "table $RTABLE" |
| log_test $? 0 "rule6 check: $1" |
| |
| fib_rule6_del_by_pref "$match" |
| log_test $? 0 "rule6 del by pref: $match" |
| } |
| |
| fib_rule6_test() |
| { |
| # setup the fib rule redirect route |
| $IP -6 route add table $RTABLE default via $GW_IP6 dev $DEV onlink |
| |
| match="oif $DEV" |
| fib_rule6_test_match_n_redirect "$match" "$match" "oif redirect to table" |
| |
| match="from $SRC_IP6 iif $DEV" |
| fib_rule6_test_match_n_redirect "$match" "$match" "iif redirect to table" |
| |
| match="tos 0x10" |
| fib_rule6_test_match_n_redirect "$match" "$match" "tos redirect to table" |
| |
| match="fwmark 0x64" |
| getmatch="mark 0x64" |
| fib_rule6_test_match_n_redirect "$match" "$getmatch" "fwmark redirect to table" |
| |
| fib_check_iproute_support "uidrange" "uid" |
| if [ $? -eq 0 ]; then |
| match="uidrange 100-100" |
| getmatch="uid 100" |
| fib_rule6_test_match_n_redirect "$match" "$getmatch" "uid redirect to table" |
| fi |
| |
| fib_check_iproute_support "sport" "sport" |
| if [ $? -eq 0 ]; then |
| match="sport 666 dport 777" |
| fib_rule6_test_match_n_redirect "$match" "$match" "sport and dport redirect to table" |
| fi |
| |
| fib_check_iproute_support "ipproto" "ipproto" |
| if [ $? -eq 0 ]; then |
| match="ipproto tcp" |
| fib_rule6_test_match_n_redirect "$match" "$match" "ipproto match" |
| fi |
| |
| fib_check_iproute_support "ipproto" "ipproto" |
| if [ $? -eq 0 ]; then |
| match="ipproto ipv6-icmp" |
| fib_rule6_test_match_n_redirect "$match" "$match" "ipproto ipv6-icmp match" |
| fi |
| } |
| |
| fib_rule4_del() |
| { |
| $IP rule del $1 |
| log_test $? 0 "del $1" |
| } |
| |
| fib_rule4_del_by_pref() |
| { |
| pref=$($IP rule show | grep "$1 lookup $TABLE" | cut -d ":" -f 1) |
| $IP rule del pref $pref |
| } |
| |
| fib_rule4_test_match_n_redirect() |
| { |
| local match="$1" |
| local getmatch="$2" |
| |
| $IP rule add $match table $RTABLE |
| $IP route get $GW_IP4 $getmatch | grep -q "table $RTABLE" |
| log_test $? 0 "rule4 check: $1" |
| |
| fib_rule4_del_by_pref "$match" |
| log_test $? 0 "rule4 del by pref: $match" |
| } |
| |
| fib_rule4_test() |
| { |
| # setup the fib rule redirect route |
| $IP route add table $RTABLE default via $GW_IP4 dev $DEV onlink |
| |
| match="oif $DEV" |
| fib_rule4_test_match_n_redirect "$match" "$match" "oif redirect to table" |
| |
| match="from $SRC_IP iif $DEV" |
| fib_rule4_test_match_n_redirect "$match" "$match" "iif redirect to table" |
| |
| match="tos 0x10" |
| fib_rule4_test_match_n_redirect "$match" "$match" "tos redirect to table" |
| |
| match="fwmark 0x64" |
| getmatch="mark 0x64" |
| fib_rule4_test_match_n_redirect "$match" "$getmatch" "fwmark redirect to table" |
| |
| fib_check_iproute_support "uidrange" "uid" |
| if [ $? -eq 0 ]; then |
| match="uidrange 100-100" |
| getmatch="uid 100" |
| fib_rule4_test_match_n_redirect "$match" "$getmatch" "uid redirect to table" |
| fi |
| |
| fib_check_iproute_support "sport" "sport" |
| if [ $? -eq 0 ]; then |
| match="sport 666 dport 777" |
| fib_rule4_test_match_n_redirect "$match" "$match" "sport and dport redirect to table" |
| fi |
| |
| fib_check_iproute_support "ipproto" "ipproto" |
| if [ $? -eq 0 ]; then |
| match="ipproto tcp" |
| fib_rule4_test_match_n_redirect "$match" "$match" "ipproto tcp match" |
| fi |
| |
| fib_check_iproute_support "ipproto" "ipproto" |
| if [ $? -eq 0 ]; then |
| match="ipproto icmp" |
| fib_rule4_test_match_n_redirect "$match" "$match" "ipproto icmp match" |
| fi |
| } |
| |
| run_fibrule_tests() |
| { |
| log_section "IPv4 fib rule" |
| fib_rule4_test |
| log_section "IPv6 fib rule" |
| fib_rule6_test |
| } |
| |
| if [ "$(id -u)" -ne 0 ];then |
| echo "SKIP: Need root privileges" |
| exit 0 |
| fi |
| |
| if [ ! -x "$(command -v ip)" ]; then |
| echo "SKIP: Could not run test without ip tool" |
| exit 0 |
| fi |
| |
| # start clean |
| cleanup &> /dev/null |
| setup |
| run_fibrule_tests |
| cleanup |
| |
| if [ "$TESTS" != "none" ]; then |
| printf "\nTests passed: %3d\n" ${nsuccess} |
| printf "Tests failed: %3d\n" ${nfail} |
| fi |
| |
| exit $ret |